Remove the migration too

bin/omarchy-cmd-audio-switch

@@ -2,11 +2,15 @@
 
 # Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.
 
+focused_monitor=$(omarchy-hyprland-monitor-focused)
+
 sinks=$(pactl -f json list sinks | jq '[.[] | select((.ports | length == 0) or ([.ports[]? | .availability != "not available"] | any))]')
 sinks_count=$(echo "$sinks" | jq '. | length')
 
 if (( sinks_count == 0 )); then
-  omarchy-swayosd-client --custom-message "No audio devices found"
+  swayosd-client \
+    --monitor "$focused_monitor" \
+    --custom-message "No audio devices found"
   exit 1
 fi
 
@@ -53,10 +57,10 @@ fi
 next_sink_volume_icon="sink-volume-${icon_state}-symbolic"
 
 if [[ $next_sink_name != $current_sink_name ]]; then
-  next_sink_wpid=$(echo "$next_sink" | jq -r '.properties."object.id"')
-  wpctl set-default "$next_sink_wpid"
+  pactl set-default-sink "$next_sink_name"
 fi
 
-omarchy-swayosd-client \
+swayosd-client \
+  --monitor "$focused_monitor" \
   --custom-message "$next_sink_description" \
   --custom-icon "$next_sink_volume_icon"

bin/omarchy-cmd-first-run

@@ -10,7 +10,6 @@ if [[ -f $FIRST_RUN_MODE ]]; then
   rm -f "$FIRST_RUN_MODE"
 
   bash "$OMARCHY_PATH/install/first-run/battery-monitor.sh"
-  bash "$OMARCHY_PATH/install/first-run/recover-internal-monitor.sh"
   bash "$OMARCHY_PATH/install/first-run/cleanup-reboot-sudoers.sh"
   bash "$OMARCHY_PATH/install/first-run/firewall.sh"
   bash "$OMARCHY_PATH/install/first-run/dns-resolver.sh"

bin/omarchy-cmd-mic-mute

@@ -1,11 +1,9 @@
 #!/bin/bash
 
-# Toggle microphone mute. Dell XPS and ThinkPad systems get special handling for the hardware LED.
+# Toggle microphone mute. Dell XPS systems get special handling for the hardware LED.
 
 if omarchy-hw-match "XPS"; then
   omarchy-cmd-mic-mute-xps
-elif omarchy-hw-match "ThinkPad"; then
-  omarchy-cmd-mic-mute-thinkpad
 else
-  omarchy-swayosd-client --input-volume mute-toggle
+  swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)" --input-volume mute-toggle
 fi

bin/omarchy-cmd-mic-mute-thinkpad

@@ -1,23 +0,0 @@
-#!/bin/bash
-
-# Toggle microphone mute on ThinkPad systems. Uses wpctl for reliable toggling
-# and syncs the platform::micmute LED via brightnessctl.
-
-wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
-
-if pactl get-source-mute @DEFAULT_SOURCE@ | grep -q 'yes'; then
-  osd_message='Microphone muted'
-  osd_icon='microphone-sensitivity-muted-symbolic'
-  led_value=1
-else
-  osd_message='Microphone on'
-  osd_icon='audio-input-microphone-symbolic'
-  led_value=0
-fi
-
-brightnessctl --device="platform::micmute" set "$led_value" >/dev/null 2>&1 || true
-
-swayosd-client \
-  --monitor "$(omarchy-hyprland-monitor-focused)" \
-  --custom-message "$osd_message" \
-  --custom-icon "$osd_icon"

bin/omarchy-cmd-mic-mute-xps

@@ -38,6 +38,7 @@ if [[ -e /sys/class/leds/platform::micmute/brightness ]]; then
   done
 fi
 
-omarchy-swayosd-client \
+swayosd-client \
+  --monitor "$(omarchy-hyprland-monitor-focused)" \
   --custom-message "$osd_message" \
   --custom-icon "$osd_icon"

bin/omarchy-cmd-screenrecord

@@ -134,7 +134,7 @@ stop_screenrecording() {
     pkill -9 -f "^gpu-screen-recorder"
     notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
   else
-    finalize_recording
+    trim_first_frame
     local filename=$(cat "$RECORDING_FILE" 2>/dev/null)
     local preview="${filename%.mp4}-preview.png"
 
@@ -159,24 +159,17 @@ screenrecording_active() {
   pgrep -f "^gpu-screen-recorder" >/dev/null
 }
 
-finalize_recording() {
+trim_first_frame() {
   local latest
   latest=$(cat "$RECORDING_FILE" 2>/dev/null)
-  [[ -f $latest ]] || return
 
-  # Trim the first frame, and normalize audio to -14 LUFS if present, in a single pass
-  local args=(-y -ss 0.1 -i "$latest")
-  if ffprobe -v error -select_streams a -show_entries stream=codec_type -of csv=p=0 "$latest" 2>/dev/null | grep -q audio; then
-    args+=(-af loudnorm=I=-14:TP=-1.5:LRA=11 -c:v copy)
-  else
-    args+=(-c copy)
-  fi
-
-  local processed="${latest%.mp4}-processed.mp4"
-  if ffmpeg "${args[@]}" "$processed" -loglevel quiet 2>/dev/null; then
-    mv "$processed" "$latest"
-  else
-    rm -f "$processed"
+  if [[ -n $latest && -f $latest ]]; then
+    local trimmed="${latest%.mp4}-trimmed.mp4"
+    if ffmpeg -y -ss 0.1 -i "$latest" -c copy "$trimmed" -loglevel quiet 2>/dev/null; then
+      mv "$trimmed" "$latest"
+    else
+      rm -f "$trimmed"
+    fi
   fi
 }
 

bin/omarchy-hw-external-monitors

@@ -1,10 +0,0 @@
-#!/bin/bash
-
-# Returns true when an external monitor is physically connected.
-# Uses kernel DRM state so the result is independent of Hyprland's startup timing.
-
-for status in /sys/class/drm/card*-*/status; do
-  [[ "$status" == *-eDP-*/status ]] && continue
-  [[ "$(<"$status")" == "connected" ]] && exit 0
-done
-exit 1

bin/omarchy-hw-hybrid-gpu

@@ -1,3 +0,0 @@
-#!/bin/bash
-
-(($(lspci | grep -cE 'VGA|3D|Display') >= 2))

bin/omarchy-hw-match

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# Match against the computer's DMI product name or product family (case-insensitive).
-# Usage: omarchy-hw-match "XPS" or omarchy-hw-match "ThinkPad"
+# Match against the computer's DMI product name (case-insensitive).
+# Usage: omarchy-hw-match "XPS"
 
-grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null ||
-grep -qi "$1" /sys/class/dmi/id/product_family 2>/dev/null
+grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null

bin/omarchy-hw-recover-internal-monitor

@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# Clear the internal-monitor-disable toggle if no external display is connected.
-# Runs before the graphical session so Hyprland doesn't block on having no output
-# to render to when the user rebooted with the external unplugged.
-
-TOGGLE="$HOME/.local/state/omarchy/toggles/hypr/internal-monitor-disable.conf"
-
-if [[ -f $TOGGLE ]] && ! omarchy-hw-external-monitors; then
-  rm -f "$TOGGLE"
-fi

bin/omarchy-hw-touchpad

@@ -1,4 +0,0 @@
-#!/bin/bash
-
-device=$(hyprctl devices -j | jq -r '[.mice[] | .name | select(test("touchpad|trackpad"; "i"))] | first // empty')
-[[ -n $device ]] && echo "$device"

bin/omarchy-hyprland-monitor-internal

@@ -1,37 +0,0 @@
-#!/bin/bash
-
-TOGGLE="internal-monitor-disable"
-
-enable() {
-  if omarchy-hyprland-toggle-enabled "$TOGGLE"; then
-    omarchy-hyprland-toggle --disabled-notification "󰍹    Laptop display enabled" "$TOGGLE"
-  fi
-}
-
-disable() {
-  if omarchy-hw-external-monitors; then
-    if omarchy-hyprland-toggle-disabled "$TOGGLE"; then
-      omarchy-hyprland-toggle --enabled-notification "󰍹    Laptop display disabled" "$TOGGLE"
-    fi
-  else
-    notify-send -u low "󰍹    Can't disable the only active display"
-    exit 1
-  fi
-}
-
-recover() {
-  if ! omarchy-hw-external-monitors && omarchy-hyprland-toggle-enabled "$TOGGLE"; then
-    omarchy-hyprland-toggle "$TOGGLE"
-  fi
-}
-
-case "$1" in
-  on) enable ;;
-  off) disable ;;
-  toggle) if omarchy-hyprland-toggle-enabled "$TOGGLE"; then enable; else disable; fi ;;
-  recover) recover ;;
-  *)
-    echo "Usage: $(basename "$0") {on|off|toggle|recover}" >&2
-    exit 1
-    ;;
-esac

bin/omarchy-hyprland-monitor-internal-disable

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+# Disable the internal laptop display. No-op if already disabled or if it
+# would leave no active display.
+
+if omarchy-hyprland-monitors-many; then
+  if omarchy-hyprland-toggle-disabled internal-monitor-disable; then
+    omarchy-hyprland-toggle --enabled-notification "󰍹    Laptop display disabled" internal-monitor-disable
+  fi
+else
+  notify-send -u low "󰍹    Can't disable the only active display"
+  exit 1
+fi

bin/omarchy-hyprland-monitor-internal-enable

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Enable the internal laptop display. No-op if already enabled.
+
+if omarchy-hyprland-toggle-enabled internal-monitor-disable; then
+  omarchy-hyprland-toggle --disabled-notification "󰍹    Laptop display enabled" internal-monitor-disable
+fi

bin/omarchy-hyprland-monitor-internal-recover

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Re-enable the internal display if it was toggled off and no external monitors
+# are currently active (e.g. external got disconnected live, during sleep, or
+# wasn't present on boot).
+
+if omarchy-hyprland-monitors-none && omarchy-hyprland-toggle-enabled internal-monitor-disable; then
+  omarchy-hyprland-monitor-internal-enable
+fi

bin/omarchy-hyprland-monitor-internal-toggle

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Toggle the internal laptop display on/off.
+
+if omarchy-hyprland-toggle-enabled internal-monitor-disable; then
+  omarchy-hyprland-monitor-internal-enable
+else
+  omarchy-hyprland-monitor-internal-disable
+fi

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -8,28 +8,15 @@ WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
 HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
 REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
 
-# Cycle through scales: 1 → 1.25 → 1.6 → 2 → 3 → 1 (or reverse with --reverse)
-SCALES=(1 1.25 1.6 2 3)
+# Cycle through scales: 1 → 1.6 → 2 → 3 → 1
+CURRENT_INT=$(awk -v s="$CURRENT_SCALE" 'BEGIN { printf "%.0f", s * 10 }')
 
-# Find the index of the scale closest to the current one (Hyprland may
-# snap fractional scales to nearby values, so we can't match exactly)
-CURRENT_IDX=$(awk -v s="$CURRENT_SCALE" -v list="${SCALES[*]}" 'BEGIN {
-  n = split(list, arr, " ")
-  best = 0; best_diff = 1e9
-  for (i = 1; i <= n; i++) {
-    d = s - arr[i]; if (d < 0) d = -d
-    if (d < best_diff) { best_diff = d; best = i - 1 }
-  }
-  print best
-}')
-
-if [[ "$1" == "--reverse" ]]; then
-  NEW_IDX=$(( (CURRENT_IDX - 1 + ${#SCALES[@]}) % ${#SCALES[@]} ))
-else
-  NEW_IDX=$(( (CURRENT_IDX + 1) % ${#SCALES[@]} ))
-fi
-
-NEW_SCALE=${SCALES[$NEW_IDX]}
+case "$CURRENT_INT" in
+10) NEW_SCALE=1.6 ;;
+16) NEW_SCALE=2 ;;
+20) NEW_SCALE=3 ;;
+*) NEW_SCALE=1 ;;
+esac
 
 hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
 notify-send -u low "󰍹    Display scaling set to ${NEW_SCALE}x"

bin/omarchy-hyprland-monitor-watch

@@ -8,7 +8,7 @@ SOCKET="$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock"
 socat -U - "UNIX-CONNECT:$SOCKET" | while read -r event; do
   case "$event" in
     monitorremoved\>\>*|monitorremovedv2\>\>*)
-      omarchy-hyprland-monitor-internal recover
+      omarchy-hyprland-monitor-internal-recover
       ;;
   esac
 done

bin/omarchy-hyprland-monitors-many

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Returns true when there are multiple monitors connected (so we can disable the internal one)
+
+(( $(hyprctl monitors -j 2>/dev/null | jq length) > 1 ))

bin/omarchy-hyprland-monitors-none

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Returns true when no monitors are connected
+
+(( $(hyprctl monitors -j 2>/dev/null | jq length) == 0 ))

bin/omarchy-install-tailscale

@@ -2,11 +2,9 @@
 
 # Install the Tailscale mesh VPN service and a web app for the Tailscale Admin Console.
 
-echo -e "\nInstalling Tailscale..."
-omarchy-pkg-add tailscale
+curl -fsSL https://tailscale.com/install.sh | sh
 
 echo -e "\nStarting Tailscale..."
-sudo systemctl enable --now tailscaled.service
 sudo tailscale up --accept-routes
 
 omarchy-webapp-install "Tailscale" "https://login.tailscale.com/admin/machines" https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png

bin/omarchy-menu

@@ -168,9 +168,8 @@ show_share_menu() {
 }
 
 show_toggle_menu() {
-  local options="󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Monitor Scaling\n"
+  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Monitor Scaling\n󰛧  Laptop Display") in
 
-  case $(menu "Toggle" "$options") in
   *Screensaver*) omarchy-toggle-screensaver ;;
   *Nightlight*) omarchy-toggle-nightlight ;;
   *Idle*) omarchy-toggle-idle ;;
@@ -179,26 +178,15 @@ show_toggle_menu() {
   *Ratio*) omarchy-hyprland-window-single-square-aspect-toggle ;;
   *Gaps*) omarchy-hyprland-window-gaps-toggle ;;
   *Scaling*) omarchy-hyprland-monitor-scaling-cycle ;;
+  *Laptop*) omarchy-hyprland-monitor-internal-toggle ;;
   *) back_to show_trigger_menu ;;
   esac
 }
 
 show_hardware_menu() {
-  local options="󰛧  Laptop Display"
-
-  if omarchy-hw-hybrid-gpu; then
-    options="$options\n  Hybrid GPU"
-  fi
-
-  if omarchy-hw-touchpad; then
-    options="$options\n󰟸  Touchpad"
-  fi
-
-  case $(menu "Toggle" "$options") in
-  *Laptop*) omarchy-hyprland-monitor-internal toggle ;;
-  *Touchpad*) omarchy-toggle-touchpad ;;
+  case $(menu "Toggle" "  Hybrid GPU") in
   *"Hybrid GPU"*) present_terminal omarchy-toggle-hybrid-gpu ;;
-  *) back_to show_trigger_menu ;;
+  *) show_trigger_menu ;;
   esac
 }
 
@@ -617,7 +605,6 @@ go_to_menu() {
   *learn*) show_learn_menu ;;
   *trigger*) show_trigger_menu ;;
   *toggle*) show_toggle_menu ;;
-  *hardware*) show_hardware_menu ;;
   *share*) show_share_menu ;;
   *background*) show_background_menu ;;
   *capture*) show_capture_menu ;;

bin/omarchy-menu-keybindings

@@ -202,7 +202,7 @@ prioritize_entries() {
     if (match(line, /Move window to workspace/))  prio = 28
     if (match(line, /Move window silently to workspace/))  prio = 29
     if (match(line, /Swap window/))  prio = 30
-    if (match(line, /Focus/))  prio = 31
+    if (match(line, /Move window focus/))  prio = 31
     if (match(line, /Move window$/))  prio = 32
     if (match(line, /Resize window/))  prio = 33
     if (match(line, /Expand window/))  prio = 34

bin/omarchy-migrate

@@ -10,7 +10,7 @@ mkdir -p "$STATE_DIR"
 mkdir -p "$STATE_DIR/skipped"
 
 # Run any pending migrations
-for file in $OMARCHY_PATH/migrations/*.sh; do
+for file in ~/.local/share/omarchy/migrations/*.sh; do
   filename=$(basename "$file")
 
   if [[ ! -f $STATE_DIR/$filename && ! -f $STATE_DIR/skipped/$filename ]]; then

bin/omarchy-refresh-hyprland

@@ -7,5 +7,3 @@ omarchy-refresh-config hypr/bindings.conf
 omarchy-refresh-config hypr/input.conf
 omarchy-refresh-config hypr/looknfeel.conf
 omarchy-refresh-config hypr/hyprland.conf
-omarchy-refresh-config hypr/monitors.conf
-bash "$OMARCHY_PATH/install/config/detect-keyboard-layout.sh"

bin/omarchy-sudo-passwordless-toggle

@@ -1,19 +1,12 @@
 #!/bin/bash
 
 # Toggle passwordless sudo for the current user.
-# Usage: omarchy-sudo-passwordless-toggle [MINUTES]
 # First run: enables passwordless sudo for 15 minutes (after confirmation).
 # Second run: disables it early.
 
 NOPASSWD_FILE="/etc/sudoers.d/99-omarchy-nopasswd-${USER}"
 TIMER_NAME="omarchy-nopasswd-expire-${USER}"
 
-MINUTES=${1:-15}
-if [[ $1 && ! $1 =~ ^[0-9]+$ ]]; then
-  echo "Usage: omarchy-sudo-passwordless-toggle [MINUTES]" >&2
-  exit 1
-fi
-
 # Safety: if the file exists but the timer doesn't (e.g. after reboot), clean up
 if sudo test -f "$NOPASSWD_FILE" && ! systemctl is-active "${TIMER_NAME}.timer" &>/dev/null; then
   sudo rm "$NOPASSWD_FILE"
@@ -21,37 +14,28 @@ fi
 
 # Check for the file directly — sudo -n can stay cached or be granted by other rules
 if sudo test -f "$NOPASSWD_FILE"; then
-  if [[ $1 ]]; then
-    sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
-    sudo systemd-run --on-active=${MINUTES}m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
-      rm "$NOPASSWD_FILE"
-    echo "Passwordless sudo timer updated. It will now automatically disable in ${MINUTES} minutes."
-  else
-    sudo rm "$NOPASSWD_FILE"
-    sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
-    echo "Passwordless sudo has been DISABLED. Sudo will require a password again."
-  fi
+  sudo rm "$NOPASSWD_FILE"
+  sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
+  echo "Passwordless sudo has been DISABLED. Sudo will require a password again."
 else
   echo ""
-  echo "⚠️WARNING: This will allow ANY process running as your user to"
-  echo "execute ANY command as root WITHOUT a password for ${MINUTES} minutes."
+  echo "⚠️  WARNING: This will allow ANY process running as your user to"
+  echo "execute ANY command as root WITHOUT a password for 15 minutes."
   echo ""
   echo "This is useful for AI agents that need to run sudo commands,"
   echo "but it significantly weakens the security of your system."
   echo "Anyone or anything with access to your user account gets full root."
   echo ""
-  echo "Passwordless sudo will automatically disable after ${MINUTES} minutes."
+  echo "Passwordless sudo will automatically disable after 15 minutes."
   echo "Run this command again to disable it early."
   echo ""
 
-  if gum confirm "Enable passwordless sudo for ${MINUTES} minutes? This is a significant security risk!"; then
+  if gum confirm "Enable passwordless sudo for 15 minutes? This is a significant security risk!"; then
     echo "${USER} ALL=(ALL) NOPASSWD: ALL" | sudo tee "$NOPASSWD_FILE" > /dev/null
     sudo chmod 440 "$NOPASSWD_FILE"
-    sudo systemd-run --on-active=${MINUTES}m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
+    sudo systemd-run --on-active=15m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
       rm "$NOPASSWD_FILE"
-
-    echo ""
-    echo "Passwordless sudo has been ENABLED. It will automatically disable in ${MINUTES} minutes."
+    echo "Passwordless sudo has been ENABLED. It will automatically disable in 15 minutes."
     echo "Note: if you restart before then, run omarchy-sudo-passwordless-toggle again to disable it."
   else
     echo "Aborted. No changes made."

bin/omarchy-swayosd-brightness

@@ -8,7 +8,8 @@ percent="$1"
 progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"
 
-omarchy-swayosd-client \
-  --custom-icon display-brightness-symbolic \
+swayosd-client \
+  --monitor "$(omarchy-hyprland-monitor-focused)" \
+  --custom-icon display-brightness \
   --custom-progress "$progress" \
   --custom-progress-text "${percent}%"

bin/omarchy-swayosd-client

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Wrapper for swayosd-client that targets the currently focused monitor.
-
-exec swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)" "$@"

bin/omarchy-swayosd-kbd-brightness

@@ -8,7 +8,8 @@ percent="$1"
 progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"
 
-omarchy-swayosd-client \
-  --custom-icon keyboard-brightness-symbolic \
+swayosd-client \
+  --monitor "$(omarchy-hyprland-monitor-focused)" \
+  --custom-icon keyboard-brightness \
   --custom-progress "$progress" \
   --custom-progress-text "${percent}%"

bin/omarchy-theme-install

@@ -15,7 +15,7 @@ if [[ -z $REPO_URL ]]; then
 fi
 
 THEMES_DIR="$HOME/.config/omarchy/themes"
-THEME_NAME=$(basename "$REPO_URL" .git | sed -E 's/^omarchy-//; s/-theme$//' | tr '[:upper:]' '[:lower:]')
+THEME_NAME=$(basename "$REPO_URL" .git | sed -E 's/^omarchy-//; s/-theme$//')
 THEME_PATH="$THEMES_DIR/$THEME_NAME"
 
 # Remove existing theme if present

bin/omarchy-theme-set-browser

@@ -14,11 +14,11 @@ if omarchy-cmd-present chromium || omarchy-cmd-present brave; then
 
   if omarchy-cmd-present chromium; then
     echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
-    pgrep -x chromium >/dev/null && chromium --refresh-platform-policy --no-startup-window &>/dev/null
+    chromium --refresh-platform-policy --no-startup-window &>/dev/null
   fi
 
   if omarchy-cmd-present brave; then
     echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
-    pgrep -x brave >/dev/null && brave --refresh-platform-policy --no-startup-window &>/dev/null
+    brave --refresh-platform-policy --no-startup-window &>/dev/null
   fi
 fi

bin/omarchy-toggle-touchpad

@@ -1,29 +0,0 @@
-#!/bin/bash
-
-STATE_CONF="$HOME/.local/state/omarchy/toggles/hypr/touchpad-disabled.conf"
-
-device="$(omarchy-hw-touchpad)"
-
-if [[ -z $device ]]; then
-  echo "No touchpad device found" >&2
-  exit 1
-fi
-
-enable() {
-  hyprctl keyword "device[$device]:enabled" true >/dev/null
-  rm -f "$STATE_CONF"
-  omarchy-swayosd-client --custom-icon input-touchpad-symbolic --custom-message "Touchpad enabled"
-}
-
-disable() {
-  hyprctl keyword "device[$device]:enabled" false >/dev/null
-  mkdir -p "$(dirname "$STATE_CONF")"
-  printf 'device {\n    name = %s\n    enabled = false\n}\n' "$device" > "$STATE_CONF"
-  omarchy-swayosd-client --custom-icon touchpad-disabled-symbolic --custom-message "Touchpad disabled"
-}
-
-case "${1:-toggle}" in
-  on) enable ;;
-  off) disable ;;
-  toggle) if [[ -f $STATE_CONF ]]; then enable; else disable; fi ;;
-esac

bin/omarchy-update-restart

@@ -2,7 +2,7 @@
 
 echo
 
-if find /usr/lib/modules -maxdepth 2 -name vmlinuz -newermt "$(uptime -s)" 2>/dev/null | grep -q .; then
+if [[ ! -d /usr/lib/modules/$(uname -r) ]]; then
   gum confirm "Linux kernel has been updated. Reboot?" && omarchy-system-reboot
 elif [[ -f $HOME/.local/state/omarchy/reboot-required ]]; then
   gum confirm "Updates require reboot. Ready?" && omarchy-system-reboot

bin/omarchy-voxtype-status

@@ -1,8 +1,5 @@
 #!/bin/bash
 
-# Clean up the voxtype --follow child when Waybar reloads
-trap 'kill 0' EXIT
-
 if omarchy-cmd-present voxtype; then
   voxtype status --follow --extended --format json | while read -r line; do
     echo "$line" | jq -c '. + {alt: .class}'

config/systemd/user/omarchy-recover-internal-monitor.service

@@ -1,11 +0,0 @@
-[Unit]
-Description=Recover the internal monitor toggle when no external display is connected
-Before=graphical-session-pre.target
-ConditionPathExists=%h/.local/state/omarchy/toggles/hypr/internal-monitor-disable.conf
-
-[Service]
-Type=oneshot
-ExecStart=%h/.local/share/omarchy/bin/omarchy-hw-recover-internal-monitor
-
-[Install]
-WantedBy=graphical-session-pre.target

default/bash/aliases

@@ -44,11 +44,10 @@ alias ....='cd ../../..'
 
 # Tools
 alias c='opencode'
-alias cx='printf "\033[2J\033[3J\033[H" && claude --permission-mode bypassPermissions'
+alias cx='printf "\033[2J\033[3J\033[H" && claude --allow-dangerously-skip-permissions'
 alias d='docker'
 alias r='rails'
 alias t='tmux attach || tmux new -s Work'
-alias i='tdl c cx'
 n() { if [ "$#" -eq 0 ]; then command nvim . ; else command nvim "$@"; fi; }
 
 # Git

default/bash/init

@@ -11,11 +11,7 @@ if command -v zoxide &> /dev/null; then
 fi
 
 if command -v try &> /dev/null; then
-  try() {
-    unset -f try
-    eval "$(SHELL=/bin/bash command try init ~/Work/tries)"
-    try "$@"
-  }
+  eval "$(SHELL=/bin/bash command try init ~/Work/tries)"
 fi
 
 if command -v fzf &> /dev/null; then

default/elephant/omarchy_themes.lua

@@ -28,15 +28,6 @@ local function first_image_in_dir(dir)
   return nil
 end
 
--- Find preview.png, preview.jpg, or first backgrounds/ image in a theme dir
-local function find_preview_path(dir)
-  local png = dir .. "/preview.png"
-  local jpg = dir .. "/preview.jpg"
-  if file_exists(png) then return png end
-  if file_exists(jpg) then return jpg end
-  return first_image_in_dir(dir .. "/backgrounds")
-end
-
 -- The main function elephant will call
 function GetEntries()
   local entries = {}
@@ -60,10 +51,19 @@ function GetEntries()
       if theme_name and not seen_themes[theme_name] then
         seen_themes[theme_name] = true
 
-        -- Check the theme dir, then fall back to the default theme dir
-        -- (for partial user customizations that don't ship a preview)
-        local preview_path = find_preview_path(theme_path)
-          or find_preview_path(default_theme_dir .. "/" .. theme_name)
+        -- Check for preview images directly (no subprocess)
+        local preview_path = nil
+        local preview_png = theme_path .. "/preview.png"
+        local preview_jpg = theme_path .. "/preview.jpg"
+
+        if file_exists(preview_png) then
+          preview_path = preview_png
+        elseif file_exists(preview_jpg) then
+          preview_path = preview_jpg
+        else
+          -- Fallback: get first image from backgrounds (one ls call)
+          preview_path = first_image_in_dir(theme_path .. "/backgrounds")
+        end
 
         if preview_path and preview_path ~= "" then
           local display_name = theme_name:gsub("_", " "):gsub("%-", " ")

default/hypr/apps.conf

@@ -12,7 +12,6 @@ source = ~/.local/share/omarchy/default/hypr/apps/geforce.conf
 source = ~/.local/share/omarchy/default/hypr/apps/moonlight.conf
 source = ~/.local/share/omarchy/default/hypr/apps/system.conf
 source = ~/.local/share/omarchy/default/hypr/apps/telegram.conf
-source = ~/.local/share/omarchy/default/hypr/apps/typora.conf
 source = ~/.local/share/omarchy/default/hypr/apps/terminals.conf
 source = ~/.local/share/omarchy/default/hypr/apps/walker.conf
 source = ~/.local/share/omarchy/default/hypr/apps/webcam-overlay.conf

default/hypr/apps/browser.conf

@@ -14,6 +14,3 @@ windowrule = tile on, match:tag chromium-based-browser
 # Only a subtle opacity change, but not for video sites
 windowrule = opacity 1.0 0.97, match:tag chromium-based-browser
 windowrule = opacity 1.0 0.97, match:tag firefox-based-browser
-
-# Hide the screen-sharing notification bar (the "Hide" button on it is broken on Wayland)
-windowrule = workspace special silent, match:title .*is sharing.*

default/hypr/apps/typora.conf

@@ -1,2 +0,0 @@
-# Float Typora print dialog
-windowrule = match:class ^Typora$, match:title ^Print$, float on, center on

default/hypr/autostart.conf

@@ -7,6 +7,7 @@ exec-once = uwsm-app -- swayosd-server
 exec-once = /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
 exec-once = omarchy-cmd-first-run
 exec-once = omarchy-powerprofiles-init
+exec-once = omarchy-hyprland-monitor-internal-recover
 exec-once = uwsm-app -- omarchy-hyprland-monitor-watch
 
 # Slow app launch fix -- set systemd vars

default/hypr/bindings/media.conf

@@ -1,28 +1,28 @@
+# Only display the OSD on the currently focused monitor
+$osdclient = swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)"
+
 # Laptop multimedia keys for volume and LCD brightness (with OSD)
-bindeld = ,XF86AudioRaiseVolume, Volume up, exec, omarchy-swayosd-client --output-volume raise
-bindeld = ,XF86AudioLowerVolume, Volume down, exec, omarchy-swayosd-client --output-volume lower
-bindeld = ,XF86AudioMute, Mute, exec, omarchy-swayosd-client --output-volume mute-toggle
+bindeld = ,XF86AudioRaiseVolume, Volume up, exec, $osdclient --output-volume raise
+bindeld = ,XF86AudioLowerVolume, Volume down, exec, $osdclient --output-volume lower
+bindeld = ,XF86AudioMute, Mute, exec, $osdclient --output-volume mute-toggle
 bindeld = ,XF86AudioMicMute, Mute microphone, exec, omarchy-cmd-mic-mute
 bindeld = ,XF86MonBrightnessUp, Brightness up, exec, omarchy-brightness-display +5%
 bindeld = ,XF86MonBrightnessDown, Brightness down, exec, omarchy-brightness-display 5%-
 bindeld = ,XF86KbdBrightnessUp, Keyboard brightness up, exec, omarchy-brightness-keyboard up
 bindeld = ,XF86KbdBrightnessDown, Keyboard brightness down, exec, omarchy-brightness-keyboard down
 bindld = ,XF86KbdLightOnOff, Keyboard backlight cycle, exec, omarchy-brightness-keyboard cycle
-bindld = ,XF86TouchpadToggle, Toggle touchpad, exec, omarchy-toggle-touchpad
-bindld = ,XF86TouchpadOn, Enable touchpad, exec, omarchy-toggle-touchpad on
-bindld = ,XF86TouchpadOff, Disable touchpad, exec, omarchy-toggle-touchpad off
 
 # Precise 1% multimedia adjustments with Alt modifier
-bindeld = ALT, XF86AudioRaiseVolume, Volume up precise, exec, omarchy-swayosd-client --output-volume +1
-bindeld = ALT, XF86AudioLowerVolume, Volume down precise, exec, omarchy-swayosd-client --output-volume -1
+bindeld = ALT, XF86AudioRaiseVolume, Volume up precise, exec, $osdclient --output-volume +1
+bindeld = ALT, XF86AudioLowerVolume, Volume down precise, exec, $osdclient --output-volume -1
 bindeld = ALT, XF86MonBrightnessUp, Brightness up precise, exec, omarchy-brightness-display +1%
 bindeld = ALT, XF86MonBrightnessDown, Brightness down precise, exec, omarchy-brightness-display 1%-
 
 # Requires playerctl
-bindld = , XF86AudioNext, Next track, exec, omarchy-swayosd-client --playerctl next
-bindld = , XF86AudioPause, Pause, exec, omarchy-swayosd-client --playerctl play-pause
-bindld = , XF86AudioPlay, Play, exec, omarchy-swayosd-client --playerctl play-pause
-bindld = , XF86AudioPrev, Previous track, exec, omarchy-swayosd-client --playerctl previous
+bindld = , XF86AudioNext, Next track, exec, $osdclient --playerctl next
+bindld = , XF86AudioPause, Pause, exec, $osdclient --playerctl play-pause
+bindld = , XF86AudioPlay, Play, exec, $osdclient --playerctl play-pause
+bindld = , XF86AudioPrev, Previous track, exec, $osdclient --playerctl previous
 
 # Switch audio output with Super + Mute
 bindld = SUPER, XF86AudioMute, Switch audio output, exec, omarchy-cmd-audio-switch

default/hypr/bindings/tiling-v2.conf

@@ -13,10 +13,10 @@ bindd = SUPER, O, Pop window out (float & pin), exec, omarchy-hyprland-window-po
 bindd = SUPER, L, Toggle workspace layout, exec, omarchy-hyprland-workspace-layout-toggle
 
 # Move focus with SUPER + arrow keys
-bindd = SUPER, LEFT, Focus on left window, movefocus, l
-bindd = SUPER, RIGHT, Focus on right window, movefocus, r
-bindd = SUPER, UP, Focus on above window, movefocus, u
-bindd = SUPER, DOWN, Focus on below window, movefocus, d
+bindd = SUPER, LEFT, Move window focus left, movefocus, l
+bindd = SUPER, RIGHT, Move window focus right, movefocus, r
+bindd = SUPER, UP, Move window focus up, movefocus, u
+bindd = SUPER, DOWN, Move window focus down, movefocus, d
 
 # Switch workspaces with SUPER + [1-9; 0]
 bindd = SUPER, code:10, Switch to workspace 1, workspace, 1
@@ -76,15 +76,11 @@ bindd = SUPER SHIFT, UP, Swap window up, swapwindow, u
 bindd = SUPER SHIFT, DOWN, Swap window down, swapwindow, d
 
 # Cycle through applications on active workspace
-bindd = ALT, TAB, Focus on next window, cyclenext
-bindd = ALT SHIFT, TAB, Focus on previous window, cyclenext, prev
+bindd = ALT, TAB, Cycle to next window, cyclenext
+bindd = ALT SHIFT, TAB, Cycle to prev window, cyclenext, prev
 bindd = ALT, TAB, Reveal active window on top, bringactivetotop
 bindd = ALT SHIFT, TAB, Reveal active window on top, bringactivetotop
 
-# Cycle through monitors
-bindd = CTRL ALT, TAB, Focus on next monitor, focusmonitor, +1
-bindd = CTRL ALT SHIFT, TAB, Focus on previous monitor, focusmonitor, -1
-
 # Resize active window
 bindd = SUPER, code:20, Expand window left, resizeactive, -100 0    # - key
 bindd = SUPER, code:21, Shrink window left, resizeactive, 100 0     # = key
@@ -128,6 +124,5 @@ bindd = SUPER ALT, code:12, Switch to group window 3, changegroupactive, 3
 bindd = SUPER ALT, code:13, Switch to group window 4, changegroupactive, 4
 bindd = SUPER ALT, code:14, Switch to group window 5, changegroupactive, 5
 
-# Cycle monitor scaling with SUPER + /
-bindd = SUPER, code:61, Cycle monitor scaling, exec, omarchy-hyprland-monitor-scaling-cycle
-bindd = SUPER ALT, code:61, Cycle monitor scaling backwards, exec, omarchy-hyprland-monitor-scaling-cycle --reverse
+# Cycle monitor scaling
+bindd = SUPER, Slash, Cycle monitor scaling, exec, omarchy-hyprland-monitor-scaling-cycle

default/hypr/bindings/utilities.conf

@@ -3,7 +3,6 @@ bindd = SUPER, SPACE, Launch apps, exec, omarchy-launch-walker
 bindd = SUPER CTRL, E, Emoji picker, exec, omarchy-launch-walker -m symbols
 bindd = SUPER CTRL, C, Capture menu, exec, omarchy-menu capture
 bindd = SUPER CTRL, O, Toggle menu, exec, omarchy-menu toggle
-bindd = SUPER CTRL, H, Hardware menu, exec, omarchy-menu hardware
 bindd = SUPER ALT, SPACE, Omarchy menu, exec, omarchy-menu
 bindd = SUPER SHIFT, code:201, Omarchy menu, exec, omarchy-menu
 bindd = SUPER, ESCAPE, System menu, exec, omarchy-menu system
@@ -29,9 +28,9 @@ bindd = SUPER SHIFT ALT, COMMA, Restore last notification, exec, makoctl restore
 # Toggles
 bindd = SUPER CTRL, I, Toggle locking on idle, exec, omarchy-toggle-idle
 bindd = SUPER CTRL, N, Toggle nightlight, exec, omarchy-toggle-nightlight
-bindd = SUPER CTRL, Delete, Toggle laptop display, exec, omarchy-hyprland-monitor-internal toggle
-bindl = , switch:on:Lid Switch, exec, omarchy-hyprland-monitor-internal off
-bindl = , switch:off:Lid Switch, exec, omarchy-hyprland-monitor-internal on
+bindd = SUPER CTRL, Delete, Toggle laptop display, exec, omarchy-hyprland-monitor-internal-toggle
+bindl = , switch:on:Lid Switch, exec, omarchy-hyprland-monitor-internal-disable
+bindl = , switch:off:Lid Switch, exec, omarchy-hyprland-monitor-internal-enable
 
 # Control Apple Display brightness
 bindd = CTRL, F1, Apple Display brightness down, exec, omarchy-brightness-display-apple -5000

default/snapper/root

@@ -1,8 +0,0 @@
-# Omarchy snapshots root only for pre-update recovery — kept to 5, no timeline
-SUBVOLUME="/"
-FSTYPE="btrfs"
-
-NUMBER_LIMIT="5"
-NUMBER_LIMIT_IMPORTANT="5"
-
-TIMELINE_CREATE="no"

install/config/hardware/intel/ptl-kernel.sh

@@ -5,9 +5,7 @@ if omarchy-hw-intel-ptl; then
   echo "Detected Intel Panther Lake, installing PTL kernel..."
 
   omarchy-pkg-add linux-ptl linux-ptl-headers
-  for pkg in linux linux-headers; do
-    sudo pacman -Rdd --noconfirm "$pkg" 2>/dev/null || true
-  done
+  sudo pacman -Rdd --noconfirm linux linux-headers 2>/dev/null || true
 
   sudo mkdir -p /etc/limine-entry-tool.d
   cat <<EOF | sudo tee /etc/limine-entry-tool.d/intel-panther-lake.conf >/dev/null

install/first-run/recover-internal-monitor.sh

@@ -1 +0,0 @@
-systemctl --user enable omarchy-recover-internal-monitor.service

install/login/limine-snapper.sh

@@ -50,14 +50,26 @@ EOF
   # We overwrite the whole thing knowing the limine-update will add the entries for us
   sudo cp $OMARCHY_PATH/default/limine/limine.conf /boot/limine.conf
 
-  # Only snapshot root — /home is user data; rolling it back loses user work
-  if ! sudo snapper list-configs 2>/dev/null | grep -q "root"; then
-    sudo snapper -c root create-config /
-  fi
-  sudo cp $OMARCHY_PATH/default/snapper/root /etc/snapper/configs/root
+  # Match Snapper configs if not installing from the ISO
+  if [[ -z ${OMARCHY_CHROOT_INSTALL:-} ]]; then
+    if ! sudo snapper list-configs 2>/dev/null | grep -q "root"; then
+      sudo snapper -c root create-config /
+    fi
 
-  # Disable btrfs quotas — full qgroup accounting is a major performance drag
-  sudo btrfs quota disable / 2>/dev/null || true
+    if ! sudo snapper list-configs 2>/dev/null | grep -q "home"; then
+      sudo snapper -c home create-config /home
+    fi
+  fi
+
+  # Enable quota to allow space-aware algorithms to work
+  sudo btrfs quota enable /
+
+  # Tweak default Snapper configs
+  sudo sed -i 's/^TIMELINE_CREATE="yes"/TIMELINE_CREATE="no"/' /etc/snapper/configs/{root,home}
+  sudo sed -i 's/^NUMBER_LIMIT="50"/NUMBER_LIMIT="5"/' /etc/snapper/configs/{root,home}
+  sudo sed -i 's/^NUMBER_LIMIT_IMPORTANT="10"/NUMBER_LIMIT_IMPORTANT="5"/' /etc/snapper/configs/{root,home}
+  sudo sed -i 's/^SPACE_LIMIT="0.5"/SPACE_LIMIT="0.3"/' /etc/snapper/configs/{root,home}
+  sudo sed -i 's/^FREE_LIMIT="0.2"/FREE_LIMIT="0.3"/' /etc/snapper/configs/{root,home}
 
   chrootable_systemctl_enable limine-snapper-sync.service
 fi

migrations/1775241210.sh

@@ -1,16 +0,0 @@
-echo "Enable GPU in voxtype if Vulkan is available"
-
-if omarchy-cmd-present voxtype; then
-  if omarchy-hw-vulkan; then
-    echo "Vulkan is available, enabling GPU in voxtype"
-    sudo voxtype setup gpu --enable || true
-  fi
-
-  # see https://github.com/peteonrails/voxtype/commit/ce6e9919cbe54cb8808dcb3cdd3bcb3260d7b900
-  # earlier versions of voxtype hard-coded the non-GPU backend in the systemd service file,
-  # so we need to re-run setup to update it to use /usr/bin/voxtype (the symlink)
-  voxtype setup systemd
-
-  systemctl --user restart voxtype
-  omarchy-restart-waybar
-fi

migrations/1776410469.sh

@@ -2,7 +2,7 @@ echo "Add flags sourcing to hyprland.conf"
 
 HYPR_CONF=~/.config/hypr/hyprland.conf
 
-source "$OMARCHY_PATH/install/config/omarchy-toggles.sh"
+source $OMARCHY_PATH/install/config/omarchy-toggles.sh
 
 if [[ -f $HYPR_CONF ]] && ! grep -q "toggles/hypr/\*\.conf" "$HYPR_CONF"; then
   echo -e "\n# Toggle config flags dynamically\nsource = ~/.local/state/omarchy/toggles/hypr/*.conf" >> "$HYPR_CONF"

migrations/1776927490.sh

@@ -1,50 +0,0 @@
-echo "Drop /home snapshots, btrfs quotas, and timeline snapshots (keep 5 root snapshots, never more)"
-
-if ! omarchy-cmd-present snapper btrfs; then
-  exit 0
-fi
-
-# Disable btrfs quotas first — every subvolume delete below would otherwise update
-# all qgroups, which is exactly the performance drag we're removing.
-sudo btrfs quota disable / 2>/dev/null || true
-
-# Remove the home config, all its snapshots, and the .snapshots subvolume.
-# If the snapshots look like someone's been using them manually (pre/post pairs,
-# userdata tags, freeform descriptions), ask before destroying.
-if sudo snapper list-configs 2>/dev/null | grep -q "home"; then
-  drop_home="yes"
-
-  if sudo snapper -c home --csvout list 2>/dev/null | \
-     awk -F, 'NR>1 && ($6=="pre" || $6=="post" || $13!="" || ($12!="current" && $12!="timeline" && $12 !~ /^[0-9]+\.[0-9]+\.[0-9]+/))' | \
-     grep -q .; then
-    gum confirm "Drop unused /home snapshots for better performance?" || drop_home="no"
-  fi
-
-  if [[ $drop_home == "yes" ]]; then
-    sudo snapper -c home list --columns number 2>/dev/null | awk 'NR>2 && $1 != "0" {print $1}' | \
-      xargs -r sudo snapper -c home delete 2>/dev/null
-    sudo snapper -c home delete-config 2>/dev/null
-
-    if [[ -d /home/.snapshots ]]; then
-      for snap in /home/.snapshots/*/snapshot; do
-        [[ -d $snap ]] && sudo btrfs subvolume delete "$snap" 2>/dev/null
-      done
-      sudo rm -rf /home/.snapshots/* 2>/dev/null
-      sudo btrfs subvolume delete /home/.snapshots 2>/dev/null
-    fi
-  fi
-fi
-
-# Ensure root config exists and matches our shipped defaults
-if ! sudo snapper list-configs 2>/dev/null | grep -q "root"; then
-  sudo snapper -c root create-config /
-fi
-sudo cp $OMARCHY_PATH/default/snapper/root /etc/snapper/configs/root
-
-# Delete all timeline snapshots — we only want pre-update (cleanup=number) snapshots
-sudo snapper -c root list --columns number,cleanup 2>/dev/null | \
-  awk '$3 == "timeline" {print $1}' | \
-  xargs -r sudo snapper -c root delete 2>/dev/null
-
-# Enforce NUMBER_LIMIT=5 on any existing number snapshots beyond the new cap
-sudo snapper -c root cleanup number 2>/dev/null

migrations/1776935686.sh

@@ -1,9 +0,0 @@
-echo "Recover the internal monitor at login when no external display is connected"
-
-SERVICE=omarchy-recover-internal-monitor.service
-
-mkdir -p ~/.config/systemd/user
-cp $OMARCHY_PATH/config/systemd/user/$SERVICE ~/.config/systemd/user/$SERVICE
-
-systemctl --user daemon-reload
-systemctl --user enable $SERVICE

themes/catppuccin/neovim.lua

@@ -1,13 +1,13 @@
 return {
-  {
-    "catppuccin/nvim",
-    name = "catppuccin",
-    priority = 1000,
-  },
-  {
-    "LazyVim/LazyVim",
-    opts = {
-      colorscheme = "catppuccin",
-    },
-  },
+	{
+		"catppuccin/nvim",
+		name = "catppuccin",
+		priority = 1000,
+	},
+	{
+		"LazyVim/LazyVim",
+		opts = {
+			colorscheme = "catppuccin",
+		},
+	},
 }

themes/lumon/colors.toml

@@ -1,5 +1,5 @@
 # Accent and UI colors
-accent = "#8bc9eb"
+accent = "#f2fcff"
 active_border_color = "#f2fcff"
 active_tab_background = "#6fb8e3"
 

themes/vantablack/btop.theme

@@ -1,5 +1,5 @@
 # Main background, empty for terminal default, need to be empty if you want transparent background
-theme[main_bg]="#000000"
+theme[main_bg]="#0d0d0d"
 
 # Main text color
 theme[main_fg]="#ffffff"

themes/vantablack/colors.toml

@@ -4,14 +4,14 @@ cursor = "#ffffff"
 
 # Primary colors
 foreground = "#ffffff"
-background = "#000000"
+background = "#0d0d0d"
 
 # Selection colors
-selection_foreground = "#000000"
+selection_foreground = "#0d0d0d"
 selection_background = "#ffffff"
 
 # Normal colors (ANSI 0-7)
-color0 = "#000000"
+color0 = "#0d0d0d"
 color1 = "#a4a4a4"
 color2 = "#b6b6b6"
 color3 = "#cecece"

version

@@ -1 +1 @@
-3.6.0
+3.5.1