Update migrations/1773976181.sh

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

bin/omarchy-ac-present

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Returns true if AC power is connected.
-
-for ac in /sys/class/power_supply/AC* /sys/class/power_supply/ADP*; do
-  [[ -r $ac/online && $(cat "$ac/online") == "1" ]] && exit 0
-done
-
-exit 1

bin/omarchy-battery-remaining-time

@@ -7,16 +7,19 @@ battery_info=$(upower -i $(upower -e | grep BAT))
 echo "$battery_info" | awk '/time to (empty|full)/ {
     value = $4
     unit = $5
-    if (unit ~ /^minute/) {
-        printf "%dm", int(value)
+    if (unit == "minutes") {
+        hours = int(value / 60)
+        minutes = int(value % 60)
     } else {
         hours = int(value)
         minutes = int((value - hours) * 60)
-        if (minutes > 0) {
-            printf "%dh %dm", hours, minutes
-        } else {
-            printf "%dh", hours
-        }
+    }
+    if (hours > 0 && minutes > 0) {
+        printf "%dh %dm", hours, minutes
+    } else if (hours > 0) {
+        printf "%dh", hours
+    } else {
+        printf "%dm", minutes
     }
     exit
 }'

bin/omarchy-brightness-keyboard

@@ -23,19 +23,14 @@ fi
 max_brightness="$(brightnessctl -d "$device" max)"
 current_brightness="$(brightnessctl -d "$device" get)"
 
-# Calculate step as 10% of max brightness. Keyboards with many levels (e.g. 512)
-# need larger steps; keyboards with few levels (e.g. 3) fall back to step=1.
-step=$(( max_brightness / 10 ))
-(( step < 1 )) && step=1
-
+# Calculate step as one unit (keyboards typically have discrete levels like 0-3).
 if [[ $direction == "cycle" ]]; then
-  new_brightness=$(( current_brightness + step ))
-  (( new_brightness > max_brightness )) && new_brightness=0
+  new_brightness=$(( (current_brightness + 1) % (max_brightness + 1) ))
 elif [[ $direction == "up" ]]; then
-  new_brightness=$(( current_brightness + step ))
+  new_brightness=$((current_brightness + 1))
   (( new_brightness > max_brightness )) && new_brightness=$max_brightness
 else
-  new_brightness=$(( current_brightness - step ))
+  new_brightness=$((current_brightness - 1))
   (( new_brightness < 0 )) && new_brightness=0
 fi
 

bin/omarchy-cmd-audio-switch

@@ -2,11 +2,15 @@
 
 # Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.
 
+focused_monitor="$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"
+
 sinks=$(pactl -f json list sinks | jq '[.[] | select((.ports | length == 0) or ([.ports[]? | .availability != "not available"] | any))]')
 sinks_count=$(echo "$sinks" | jq '. | length')
 
 if (( sinks_count == 0 )); then
-  omarchy-swayosd-client --custom-message "No audio devices found"
+  swayosd-client \
+    --monitor "$focused_monitor" \
+    --custom-message "No audio devices found"
   exit 1
 fi
 
@@ -53,10 +57,10 @@ fi
 next_sink_volume_icon="sink-volume-${icon_state}-symbolic"
 
 if [[ $next_sink_name != $current_sink_name ]]; then
-  next_sink_wpid=$(echo "$next_sink" | jq -r '.properties."object.id"')
-  wpctl set-default "$next_sink_wpid"
+  pactl set-default-sink "$next_sink_name"
 fi
 
-omarchy-swayosd-client \
+swayosd-client \
+  --monitor "$focused_monitor" \
   --custom-message "$next_sink_description" \
   --custom-icon "$next_sink_volume_icon"

bin/omarchy-cmd-first-run

@@ -10,7 +10,6 @@ if [[ -f $FIRST_RUN_MODE ]]; then
   rm -f "$FIRST_RUN_MODE"
 
   bash "$OMARCHY_PATH/install/first-run/battery-monitor.sh"
-  bash "$OMARCHY_PATH/install/first-run/recover-internal-monitor.sh"
   bash "$OMARCHY_PATH/install/first-run/cleanup-reboot-sudoers.sh"
   bash "$OMARCHY_PATH/install/first-run/firewall.sh"
   bash "$OMARCHY_PATH/install/first-run/dns-resolver.sh"

bin/omarchy-cmd-mic-mute

@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# Toggle microphone mute. Dell XPS and ThinkPad systems get special handling for the hardware LED.
-
-if omarchy-hw-match "XPS"; then
-  omarchy-cmd-mic-mute-xps
-elif omarchy-hw-match "ThinkPad"; then
-  omarchy-cmd-mic-mute-thinkpad
-else
-  omarchy-swayosd-client --input-volume mute-toggle
-fi

bin/omarchy-cmd-mic-mute-thinkpad

@@ -1,23 +0,0 @@
-#!/bin/bash
-
-# Toggle microphone mute on ThinkPad systems. Uses wpctl for reliable toggling
-# and syncs the platform::micmute LED via brightnessctl.
-
-wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
-
-if pactl get-source-mute @DEFAULT_SOURCE@ | grep -q 'yes'; then
-  osd_message='Microphone muted'
-  osd_icon='microphone-sensitivity-muted-symbolic'
-  led_value=1
-else
-  osd_message='Microphone on'
-  osd_icon='audio-input-microphone-symbolic'
-  led_value=0
-fi
-
-brightnessctl --device="platform::micmute" set "$led_value" >/dev/null 2>&1 || true
-
-swayosd-client \
-  --monitor "$(omarchy-hyprland-monitor-focused)" \
-  --custom-message "$osd_message" \
-  --custom-icon "$osd_icon"

bin/omarchy-cmd-mic-mute-xps

@@ -1,43 +0,0 @@
-#!/bin/bash
-
-# Toggle microphone mute on Dell XPS systems. Uses wpctl for reliable toggling
-# and syncs the ALSA capture switch so the hardware mic mute LED follows state.
-
-wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
-
-if pactl get-source-mute @DEFAULT_SOURCE@ | rg -q 'yes'; then
-  alsa_value='off,off'
-  osd_message='Microphone muted'
-  osd_icon='microphone-sensitivity-muted-symbolic'
-else
-  alsa_value='on,on'
-  osd_message='Microphone on'
-  osd_icon='audio-input-microphone-symbolic'
-fi
-
-if [[ -e /sys/class/leds/platform::micmute/brightness ]]; then
-  default_source=$(pactl get-default-source)
-  alsa_card=$(pactl -f json list sources | jq -r --arg source "$default_source" '
-    .[] | select(.name == $source) |
-    .properties["alsa.card"] // .properties["api.alsa.card"] // .properties["api.alsa.pcm.card"] // empty
-  ' | head -1)
-
-  if [[ -n $alsa_card ]]; then
-    cards=("$alsa_card")
-  else
-    mapfile -t cards < <(compgen -G '/proc/asound/card*' | rg -o 'card[0-9]+' | sed 's/card//' | sort -u)
-  fi
-
-  for card in "${cards[@]}"; do
-    while IFS= read -r control; do
-      if [[ $control != *"Jack Microphone"* ]]; then
-        amixer -c "$card" cset "$control" "$alsa_value" >/dev/null 2>&1 || true
-        break 2
-      fi
-    done < <(amixer -c "$card" controls 2>/dev/null | rg -o "name='[^']*Microphone Capture Switch'")
-  done
-fi
-
-omarchy-swayosd-client \
-  --custom-message "$osd_message" \
-  --custom-icon "$osd_icon"

bin/omarchy-cmd-screenrecord

@@ -134,7 +134,7 @@ stop_screenrecording() {
     pkill -9 -f "^gpu-screen-recorder"
     notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
   else
-    finalize_recording
+    trim_first_frame
     local filename=$(cat "$RECORDING_FILE" 2>/dev/null)
     local preview="${filename%.mp4}-preview.png"
 
@@ -159,24 +159,17 @@ screenrecording_active() {
   pgrep -f "^gpu-screen-recorder" >/dev/null
 }
 
-finalize_recording() {
+trim_first_frame() {
   local latest
   latest=$(cat "$RECORDING_FILE" 2>/dev/null)
-  [[ -f $latest ]] || return
 
-  # Trim the first frame, and normalize audio to -14 LUFS if present, in a single pass
-  local args=(-y -ss 0.1 -i "$latest")
-  if ffprobe -v error -select_streams a -show_entries stream=codec_type -of csv=p=0 "$latest" 2>/dev/null | grep -q audio; then
-    args+=(-af loudnorm=I=-14:TP=-1.5:LRA=11 -c:v copy)
-  else
-    args+=(-c copy)
-  fi
-
-  local processed="${latest%.mp4}-processed.mp4"
-  if ffmpeg "${args[@]}" "$processed" -loglevel quiet 2>/dev/null; then
-    mv "$processed" "$latest"
-  else
-    rm -f "$processed"
+  if [[ -n $latest && -f $latest ]]; then
+    local trimmed="${latest%.mp4}-trimmed.mp4"
+    if ffmpeg -y -ss 0.1 -i "$latest" -c copy "$trimmed" -loglevel quiet 2>/dev/null; then
+      mv "$trimmed" "$latest"
+    else
+      rm -f "$trimmed"
+    fi
   fi
 }
 

bin/omarchy-cmd-screenshot

@@ -8,8 +8,8 @@
 OUTPUT_DIR="${OMARCHY_SCREENSHOT_DIR:-${XDG_PICTURES_DIR:-$HOME/Pictures}}"
 
 if [[ ! -d $OUTPUT_DIR ]]; then
-  mkdir -p "$OUTPUT_DIR"
-  notify-send "Created screenshot directory: $OUTPUT_DIR" -u normal -t 2000
+  notify-send "Screenshot directory does not exist: $OUTPUT_DIR" -u critical -t 3000
+  exit 1
 fi
 
 pkill slurp && exit 0

bin/omarchy-font-set

@@ -33,7 +33,7 @@ if [[ -n $font_name ]]; then
     omarchy-restart-swayosd
 
     if pgrep -x ghostty; then
-      notify-send -u low "    You must restart Ghostty to see font change"
+      notify-send "    You must restart Ghostty to see font change"
     fi
 
     omarchy-hook font-set "$font_name"

bin/omarchy-haptic-touchpad

@@ -1,94 +0,0 @@
-#!/usr/bin/env python3
-
-"""Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
-
-Monitors touchpad button press events and sends haptic pulses via HID
-feature reports. Required because the kernel's HID haptic subsystem only
-supports Auto Trigger with waveform enumeration, not the simpler Manual
-Trigger protocol used by these Synaptics touchpads.
-"""
-
-import fcntl, glob, os, struct, sys
-
-VENDOR = "06CB"
-REPORT_ID = 0x37
-INTENSITY = 40  # 0-100
-
-# input_event: struct timeval (16 bytes on 64-bit) + type(H) + code(H) + value(i)
-EVENT_FORMAT = "llHHi"
-EVENT_SIZE = struct.calcsize(EVENT_FORMAT)
-EV_KEY = 0x01
-BTN_LEFT = 272
-BTN_RIGHT = 273
-BTN_MIDDLE = 274
-
-# ioctl: HIDIOCSFEATURE(len) = _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
-def HIDIOCSFEATURE(length):
-    return 0xC0000000 | (length << 16) | (ord("H") << 8) | 0x06
-
-
-def find_hidraw():
-    for path in sorted(glob.glob("/sys/class/hidraw/hidraw*")):
-        uevent = os.path.join(path, "device", "uevent")
-        try:
-            with open(uevent) as f:
-                content = f.read().upper()
-            if f"0000{VENDOR}" in content:
-                return os.path.join("/dev", os.path.basename(path))
-        except OSError:
-            continue
-    return None
-
-
-def find_touchpad_event():
-    for path in sorted(glob.glob("/sys/class/input/event*/device/name")):
-        try:
-            with open(path) as f:
-                name = f.read().strip().upper()
-            if VENDOR in name and "TOUCHPAD" in name:
-                event = path.split("/")[-3]
-                return os.path.join("/dev/input", event)
-        except OSError:
-            continue
-    return None
-
-
-def main():
-    hidraw = find_hidraw()
-    if not hidraw:
-        print("No Synaptics haptic touchpad hidraw device found", file=sys.stderr)
-        sys.exit(1)
-
-    event = find_touchpad_event()
-    if not event:
-        print("No Synaptics haptic touchpad input device found", file=sys.stderr)
-        sys.exit(1)
-
-    print(f"Haptic touchpad: hidraw={hidraw} input={event} intensity={INTENSITY}", flush=True)
-
-    haptic_report = struct.pack("BB", REPORT_ID, INTENSITY)
-    ioctl_req = HIDIOCSFEATURE(len(haptic_report))
-
-    hidraw_fd = os.open(hidraw, os.O_RDWR)
-    event_fd = os.open(event, os.O_RDONLY)
-
-    try:
-        while True:
-            data = os.read(event_fd, EVENT_SIZE)
-            if len(data) < EVENT_SIZE:
-                continue
-            _, _, ev_type, code, value = struct.unpack(EVENT_FORMAT, data)
-            if ev_type == EV_KEY and code in (BTN_LEFT, BTN_RIGHT, BTN_MIDDLE) and value == 1:
-                try:
-                    fcntl.ioctl(hidraw_fd, ioctl_req, haptic_report)
-                except OSError:
-                    pass
-    except KeyboardInterrupt:
-        pass
-    finally:
-        os.close(event_fd)
-        os.close(hidraw_fd)
-
-
-if __name__ == "__main__":
-    main()

bin/omarchy-hibernation-setup

@@ -14,22 +14,9 @@ if ! command -v limine-mkinitcpio &>/dev/null; then
 fi
 
 MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
-SWAP_FILE="/swap/swapfile"
-RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
 
 # Check if hibernation is already configured
 if [[ -f $MKINITCPIO_CONF ]] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
-  # Fix empty resume_offset if btrfs map-swapfile failed during initial setup
-  if [[ -f $RESUME_DROP_IN ]] && grep -q 'resume_offset="$' "$RESUME_DROP_IN" && [[ -f $SWAP_FILE ]]; then
-    RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE" 2>/dev/null)
-    if [[ -n $RESUME_OFFSET ]]; then
-      echo "Fixing empty resume_offset ($RESUME_OFFSET)"
-      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" "$RESUME_DROP_IN"
-      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" /etc/default/limine
-      sudo limine-mkinitcpio
-      sudo limine-update
-    fi
-  fi
   echo "Hibernation is already set up"
   exit 0
 fi
@@ -42,6 +29,7 @@ if [[ $1 != "--force" ]]; then
 fi
 
 SWAP_SUBVOLUME="/swap"
+SWAP_FILE="$SWAP_SUBVOLUME/swapfile"
 
 # Create btrfs subvolume for swap
 if ! sudo btrfs subvolume show "$SWAP_SUBVOLUME" &>/dev/null; then
@@ -80,18 +68,15 @@ sudo cp -p "$OMARCHY_PATH/default/systemd/system-sleep/keyboard-backlight" /usr/
 
 # Add resume= kernel parameters so the initramfs resume hook knows where to find the
 # hibernation image. Without these, resume happens late (after GPU drivers load) and fails.
+RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
 if [[ ! -f $RESUME_DROP_IN ]]; then
   echo "Adding resume kernel parameters"
   sudo swapon -p 0 "$SWAP_FILE" 2>/dev/null
   RESUME_DEVICE=$(findmnt -no SOURCE -T "$SWAP_FILE" | sed 's/\[.*\]//')
   RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
-  if [[ -n $RESUME_OFFSET ]]; then
-    sudo mkdir -p /etc/limine-entry-tool.d
-    echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
-    sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
-  else
-    echo "Warning: Could not determine resume offset for $SWAP_FILE" >&2
-  fi
+  sudo mkdir -p /etc/limine-entry-tool.d
+  echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+  sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
 fi
 
 # Use ACPI alarm for RTC wakeup on s2idle systems (needed for suspend-then-hibernate)

bin/omarchy-hw-dell-xps-oled

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Match Dell XPS systems with LG OLED panel on Intel Panther Lake (Xe3) GPU.
-
-omarchy-hw-match "XPS" \
-  && omarchy-hw-intel-ptl \
-  && test "$(od -An -tx1 -j8 -N2 /sys/class/drm/card*-eDP-*/edid 2>/dev/null | tr -d ' \n')" = "30e4"

bin/omarchy-hw-external-monitors

@@ -1,10 +0,0 @@
-#!/bin/bash
-
-# Returns true when an external monitor is physically connected.
-# Uses kernel DRM state so the result is independent of Hyprland's startup timing.
-
-for status in /sys/class/drm/card*-*/status; do
-  [[ "$status" == *-eDP-*/status ]] && continue
-  [[ "$(<"$status")" == "connected" ]] && exit 0
-done
-exit 1

bin/omarchy-hw-framework16

@@ -3,4 +3,4 @@
 # Detect whether the computer is a Framework Laptop 16.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Framework" ]] &&
-  omarchy-hw-match "Laptop 16"
+  grep -q "Laptop 16" /sys/class/dmi/id/product_name 2>/dev/null

bin/omarchy-hw-hybrid-gpu

@@ -1,3 +0,0 @@
-#!/bin/bash
-
-(($(lspci | grep -cE 'VGA|3D|Display') >= 2))

bin/omarchy-hw-intel-ptl

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer has an Intel Panther Lake GPU.
-
-lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'

bin/omarchy-hw-match

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Match against the computer's DMI product name or product family (case-insensitive).
-# Usage: omarchy-hw-match "XPS" or omarchy-hw-match "ThinkPad"
-
-grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null ||
-grep -qi "$1" /sys/class/dmi/id/product_family 2>/dev/null

bin/omarchy-hw-recover-internal-monitor

@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# Clear the internal-monitor-disable toggle if no external display is connected.
-# Runs before the graphical session so Hyprland doesn't block on having no output
-# to render to when the user rebooted with the external unplugged.
-
-TOGGLE="$HOME/.local/state/omarchy/toggles/hypr/internal-monitor-disable.conf"
-
-if [[ -f $TOGGLE ]] && ! omarchy-hw-external-monitors; then
-  rm -f "$TOGGLE"
-fi

bin/omarchy-hw-surface

@@ -3,4 +3,4 @@
 # Detect whether the computer is a Microsoft Surface device.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Microsoft Corporation" ]] &&
-  omarchy-hw-match "Surface"
+  grep -q "Surface" /sys/class/dmi/id/product_name 2>/dev/null

bin/omarchy-hw-touchpad

@@ -1,4 +0,0 @@
-#!/bin/bash
-
-device=$(hyprctl devices -j | jq -r '[.mice[] | .name | select(test("touchpad|trackpad"; "i"))] | first // empty')
-[[ -n $device ]] && echo "$device"

bin/omarchy-hw-vulkan

@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Detect whether Vulkan is available.
-
-[[ -d /usr/share/vulkan/icd.d ]] &&
-  find /usr/share/vulkan/icd.d -maxdepth 1 -name "*.json" -print -quit | grep -q .

bin/omarchy-hyprland-active-window-transparency-toggle

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Toggles transparency for the currently focused window.
-
-hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle

bin/omarchy-hyprland-monitor-focused

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Print the name of the currently focused Hyprland monitor.
-
-hyprctl monitors -j | jq -r '.[] | select(.focused == true).name'

bin/omarchy-hyprland-monitor-internal

@@ -1,37 +0,0 @@
-#!/bin/bash
-
-TOGGLE="internal-monitor-disable"
-
-enable() {
-  if omarchy-hyprland-toggle-enabled "$TOGGLE"; then
-    omarchy-hyprland-toggle --disabled-notification "󰍹    Laptop display enabled" "$TOGGLE"
-  fi
-}
-
-disable() {
-  if omarchy-hw-external-monitors; then
-    if omarchy-hyprland-toggle-disabled "$TOGGLE"; then
-      omarchy-hyprland-toggle --enabled-notification "󰍹    Laptop display disabled" "$TOGGLE"
-    fi
-  else
-    notify-send -u low "󰍹    Can't disable the only active display"
-    exit 1
-  fi
-}
-
-recover() {
-  if ! omarchy-hw-external-monitors && omarchy-hyprland-toggle-enabled "$TOGGLE"; then
-    omarchy-hyprland-toggle "$TOGGLE"
-  fi
-}
-
-case "$1" in
-  on) enable ;;
-  off) disable ;;
-  toggle) if omarchy-hyprland-toggle-enabled "$TOGGLE"; then enable; else disable; fi ;;
-  recover) recover ;;
-  *)
-    echo "Usage: $(basename "$0") {on|off|toggle|recover}" >&2
-    exit 1
-    ;;
-esac

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -8,28 +8,17 @@ WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
 HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
 REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
 
-# Cycle through scales: 1 → 1.25 → 1.6 → 2 → 3 → 1 (or reverse with --reverse)
-SCALES=(1 1.25 1.6 2 3)
+# Cycle through scales: 1 → 1.6 → 2 → 3 → 1
+CURRENT_INT=$(awk -v s="$CURRENT_SCALE" 'BEGIN { printf "%.0f", s * 10 }')
 
-# Find the index of the scale closest to the current one (Hyprland may
-# snap fractional scales to nearby values, so we can't match exactly)
-CURRENT_IDX=$(awk -v s="$CURRENT_SCALE" -v list="${SCALES[*]}" 'BEGIN {
-  n = split(list, arr, " ")
-  best = 0; best_diff = 1e9
-  for (i = 1; i <= n; i++) {
-    d = s - arr[i]; if (d < 0) d = -d
-    if (d < best_diff) { best_diff = d; best = i - 1 }
-  }
-  print best
-}')
-
-if [[ "$1" == "--reverse" ]]; then
-  NEW_IDX=$(( (CURRENT_IDX - 1 + ${#SCALES[@]}) % ${#SCALES[@]} ))
-else
-  NEW_IDX=$(( (CURRENT_IDX + 1) % ${#SCALES[@]} ))
-fi
-
-NEW_SCALE=${SCALES[$NEW_IDX]}
+case "$CURRENT_INT" in
+10) NEW_SCALE=1.6 ;;
+16) NEW_SCALE=2 ;;
+20) NEW_SCALE=3 ;;
+*) NEW_SCALE=1 ;;
+esac
 
+hyprctl keyword misc:disable_scale_notification true
 hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
-notify-send -u low "󰍹    Display scaling set to ${NEW_SCALE}x"
+hyprctl keyword misc:disable_scale_notification false
+notify-send "󰍹    Display scaling set to ${NEW_SCALE}x"

bin/omarchy-hyprland-monitor-watch

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-# Listen on Hyprland's event socket and recover the internal display whenever
-# a monitor is removed.
-
-SOCKET="$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock"
-
-socat -U - "UNIX-CONNECT:$SOCKET" | while read -r event; do
-  case "$event" in
-    monitorremoved\>\>*|monitorremovedv2\>\>*)
-      omarchy-hyprland-monitor-internal recover
-      ;;
-  esac
-done

bin/omarchy-hyprland-toggle

@@ -1,31 +0,0 @@
-#!/bin/bash
-
-# Toggle permanent Hyprland flags by copying them into a directory that's sourced entirely.
-
-ENABLED_NOTIFICATION=""
-DISABLED_NOTIFICATION=""
-
-while [[ $# -gt 1 ]]; do
-  case $1 in
-    --enabled-notification) ENABLED_NOTIFICATION="$2"; shift 2 ;;
-    --disabled-notification) DISABLED_NOTIFICATION="$2"; shift 2 ;;
-    *) break ;;
-  esac
-done
-
-FLAG_NAME="$1"
-FLAG="$HOME/.local/state/omarchy/toggles/hypr/$FLAG_NAME.conf"
-FLAG_SOURCE="$OMARCHY_PATH/default/hypr/toggles/$FLAG_NAME.conf"
-
-if [[ -f $FLAG ]]; then
-  rm $FLAG
-  [[ -n $DISABLED_NOTIFICATION ]] && notify-send -u low "$DISABLED_NOTIFICATION"
-elif [[ -f $FLAG_SOURCE ]]; then
-  cp $FLAG_SOURCE $FLAG
-  [[ -n $ENABLED_NOTIFICATION ]] && notify-send -u low "$ENABLED_NOTIFICATION"
-else
-  echo "Flag not found: $FLAG_NAME"
-  exit 1
-fi
-
-hyprctl reload

bin/omarchy-hyprland-toggle-disabled

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Check if a Hyprland toggle is currently disabled (missing).
-
-[[ ! -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-toggle-enabled

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Check if a Hyprland toggle is currently enabled.
-
-[[ -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-window-gaps-toggle

@@ -1,5 +1,15 @@
 #!/bin/bash
 
-# Toggles the window gaps globally between no gaps and the default.
+# Toggles the window gaps globally between no gaps and the default 10/5/2.
 
-omarchy-hyprland-toggle window-no-gaps
+gaps=$(hyprctl getoption general:gaps_out -j | jq -r '.custom' | awk '{print $1}')
+
+if [[ $gaps == "0" ]]; then
+  hyprctl keyword general:gaps_out 10
+  hyprctl keyword general:gaps_in 5
+  hyprctl keyword general:border_size 2
+else
+  hyprctl keyword general:gaps_out 0
+  hyprctl keyword general:gaps_in 0
+  hyprctl keyword general:border_size 0
+fi

bin/omarchy-hyprland-window-single-square-aspect-toggle

@@ -1,8 +1,13 @@
 #!/bin/bash
 
-# Toggle single-window square aspect ratio.
+# Check current single_window_aspect_ratio setting
+CURRENT_VALUE=$(hyprctl getoption "layout:single_window_aspect_ratio" 2>/dev/null | head -1)
 
-omarchy-hyprland-toggle \
-  --enabled-notification "      Enable single-window square aspect ratio" \
-  --disabled-notification "      Disable single-window square aspect ratio" \
-  single-window-aspect-ratio
+# Parse vec2 output: "vec2: [1, 1]" or "vec2: [0, 0]"
+if [[ $CURRENT_VALUE == *"[1, 1]"* ]]; then
+  hyprctl keyword layout:single_window_aspect_ratio "0 0"
+  notify-send "    Disable single-window square aspect ratio"
+else
+  hyprctl keyword layout:single_window_aspect_ratio "1 1"
+  notify-send "    Enable single-window square aspect"
+fi

bin/omarchy-hyprland-workspace-layout-toggle

@@ -11,4 +11,4 @@ case "$CURRENT_LAYOUT" in
 esac
 
 hyprctl keyword workspace $ACTIVE_WORKSPACE, layout:$NEW_LAYOUT
-notify-send -u low "󱂬    Workspace layout set to $NEW_LAYOUT"
+notify-send "󱂬    Workspace layout set to $NEW_LAYOUT"

bin/omarchy-install-once

@@ -1,12 +0,0 @@
-#!/bin/bash
-
-# Install the ONCE service, enable its background service, and launch the TUI.
-
-echo "Installing ONCE..."
-omarchy-pkg-add once-bin
-
-echo "Enabling ONCE background service..."
-sudo systemctl enable --now once-background.service
-
-echo -e "\nLaunching ONCE..."
-once

bin/omarchy-install-tailscale

@@ -2,11 +2,9 @@
 
 # Install the Tailscale mesh VPN service and a web app for the Tailscale Admin Console.
 
-echo -e "\nInstalling Tailscale..."
-omarchy-pkg-add tailscale
+curl -fsSL https://tailscale.com/install.sh | sh
 
 echo -e "\nStarting Tailscale..."
-sudo systemctl enable --now tailscaled.service
 sudo tailscale up --accept-routes
 
 omarchy-webapp-install "Tailscale" "https://login.tailscale.com/admin/machines" https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png

bin/omarchy-launch-screensaver

@@ -11,14 +11,14 @@ fi
 pgrep -f org.omarchy.screensaver && exit 0
 
 # Allow screensaver to be turned off but also force started
-if omarchy-toggle-enabled screensaver-off && [[ $1 != "force" ]]; then
+if [[ -f ~/.local/state/omarchy/toggles/screensaver-off ]] && [[ $1 != "force" ]]; then
   exit 1
 fi
 
 # Silently quit Walker on overlay
 walker -q
 
-focused=$(omarchy-hyprland-monitor-focused)
+focused=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')
 terminal=$(xdg-terminal-exec --print-id)
 
 for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
@@ -46,7 +46,7 @@ for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
       -e omarchy-cmd-screensaver
     ;;
   *)
-    notify-send -u low "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
+    notify-send "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
     ;;
   esac
 done

bin/omarchy-launch-walker

@@ -9,7 +9,7 @@ fi
 
 # Ensure walker service is running
 if ! pgrep -f "walker --gapplication-service" > /dev/null; then
-  setsid uwsm-app -- env GSK_RENDERER=cairo walker --gapplication-service &
+  setsid uwsm-app -- walker --gapplication-service &
 fi
 
 exec walker --width 644 --maxheight 300 --minheight 300 "$@"

bin/omarchy-launch-webapp

@@ -5,7 +5,7 @@
 browser=$(xdg-settings get default-web-browser)
 
 case $browser in
-google-chrome* | brave* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
+google-chrome* | brave-browser* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
 *) browser="chromium.desktop" ;;
 esac
 

bin/omarchy-menu

@@ -54,7 +54,7 @@ present_terminal() {
 }
 
 open_in_editor() {
-  notify-send -u low "Editing config file" "$1"
+  notify-send "Editing config file" "$1"
   omarchy-launch-editor "$1"
 }
 
@@ -168,9 +168,8 @@ show_share_menu() {
 }
 
 show_toggle_menu() {
-  local options="󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Monitor Scaling\n"
+  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Display Scaling") in
 
-  case $(menu "Toggle" "$options") in
   *Screensaver*) omarchy-toggle-screensaver ;;
   *Nightlight*) omarchy-toggle-nightlight ;;
   *Idle*) omarchy-toggle-idle ;;
@@ -184,21 +183,9 @@ show_toggle_menu() {
 }
 
 show_hardware_menu() {
-  local options="󰛧  Laptop Display"
-
-  if omarchy-hw-hybrid-gpu; then
-    options="$options\n  Hybrid GPU"
-  fi
-
-  if omarchy-hw-touchpad; then
-    options="$options\n󰟸  Touchpad"
-  fi
-
-  case $(menu "Toggle" "$options") in
-  *Laptop*) omarchy-hyprland-monitor-internal toggle ;;
-  *Touchpad*) omarchy-toggle-touchpad ;;
+  case $(menu "Toggle" "  Hybrid GPU") in
   *"Hybrid GPU"*) present_terminal omarchy-toggle-hybrid-gpu ;;
-  *) back_to show_trigger_menu ;;
+  *) show_trigger_menu ;;
   esac
 }
 
@@ -234,6 +221,7 @@ show_font_menu() {
 show_setup_menu() {
   local options="  Audio\n  Wifi\n󰂯  Bluetooth\n󱐋  Power Profile\n  System Sleep\n󰍹  Monitors"
   [[ -f ~/.config/hypr/bindings.conf ]] && options="$options\n  Keybindings"
+  options="$options\n  Key Remapping"
   [[ -f ~/.config/hypr/input.conf ]] && options="$options\n  Input"
   options="$options\n󰱔  DNS\n  Security\n  Config"
 
@@ -246,6 +234,7 @@ show_setup_menu() {
   *Monitors*) open_in_editor ~/.config/hypr/monitors.conf ;;
   *Keybindings*) open_in_editor ~/.config/hypr/bindings.conf ;;
   *Input*) open_in_editor ~/.config/hypr/input.conf ;;
+  *Key\ Remapping*) omarchy-setup-makima && open_in_editor "$HOME/.config/makima/AT Translated Set 2 keyboard.toml" && omarchy-restart-makima ;;
   *DNS*) present_terminal omarchy-setup-dns ;;
   *Security*) show_setup_security_menu ;;
   *Config*) show_setup_config_menu ;;
@@ -289,7 +278,7 @@ show_setup_config_menu() {
 show_setup_system_menu() {
   local options=""
 
-  if omarchy-toggle-enabled suspend-off; then
+  if [[ -f ~/.local/state/omarchy/toggles/suspend-off ]]; then
     options="$options󰒲  Enable Suspend"
   else
     options="$options󰒲  Disable Suspend"
@@ -328,11 +317,10 @@ show_install_menu() {
 }
 
 show_install_service_menu() {
-  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN [AUR]\n󰏖  ONCE\n󰟵  Bitwarden\n  Chromium Account") in
+  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN [AUR]\n󰟵  Bitwarden\n  Chromium Account") in
   *Dropbox*) present_terminal omarchy-install-dropbox ;;
   *Tailscale*) present_terminal omarchy-install-tailscale ;;
   *NordVPN*) present_terminal omarchy-install-nordvpn ;;
-  *ONCE*) present_terminal omarchy-install-once ;;
   *Bitwarden*) install_and_launch "Bitwarden" "bitwarden bitwarden-cli" "bitwarden" ;;
   *Chromium*) present_terminal omarchy-install-chromium-google-account ;;
   *) show_install_menu ;;
@@ -541,10 +529,9 @@ show_update_channel_menu() {
   esac
 }
 show_update_process_menu() {
-  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n󰎟  Mako\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
+  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
   *Hypridle*) omarchy-restart-hypridle ;;
   *Hyprsunset*) omarchy-restart-hyprsunset ;;
-  *Mako*) omarchy-restart-mako ;;
   *Swayosd*) omarchy-restart-swayosd ;;
   *Walker*) omarchy-restart-walker ;;
   *Waybar*) omarchy-restart-waybar ;;
@@ -568,11 +555,10 @@ show_update_config_menu() {
 }
 
 show_update_hardware_menu() {
-  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth\n󰟸  Trackpad") in
+  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth") in
   *Audio*) present_terminal omarchy-restart-pipewire ;;
   *Wi-Fi*) present_terminal omarchy-restart-wifi ;;
   *Bluetooth*) present_terminal omarchy-restart-bluetooth ;;
-  *Trackpad*) present_terminal omarchy-restart-trackpad ;;
   *) show_update_menu ;;
   esac
 }
@@ -591,7 +577,7 @@ show_about() {
 
 show_system_menu() {
   local options="󱄄  Screensaver\n  Lock"
-  ! omarchy-toggle-enabled suspend-off && options="$options\n󰒲  Suspend"
+  [[ ! -f ~/.local/state/omarchy/toggles/suspend-off ]] && options="$options\n󰒲  Suspend"
   omarchy-hibernation-available && options="$options\n󰤁  Hibernate"
   options="$options\n󰍃  Logout\n󰜉  Restart\n󰐥  Shutdown"
 
@@ -617,7 +603,6 @@ go_to_menu() {
   *learn*) show_learn_menu ;;
   *trigger*) show_trigger_menu ;;
   *toggle*) show_toggle_menu ;;
-  *hardware*) show_hardware_menu ;;
   *share*) show_share_menu ;;
   *background*) show_background_menu ;;
   *capture*) show_capture_menu ;;

bin/omarchy-menu-keybindings

@@ -46,12 +46,8 @@ parse_keycodes() {
   while IFS= read -r line; do
     if [[ $line =~ code:([0-9]+) ]]; then
       code="${BASH_REMATCH[1]}"
-      if [[ $code == "201" ]]; then
-        echo "${line/SUPER SHIFT,code:201/,COPILOT KEY}"
-      else
-        symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
-        echo "${line/code:${code}/$symbol}"
-      fi
+      symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
+      echo "${line/code:${code}/$symbol}"
     elif [[ $line =~ mouse:([0-9]+) ]]; then
       code="${BASH_REMATCH[1]}"
 
@@ -202,7 +198,7 @@ prioritize_entries() {
     if (match(line, /Move window to workspace/))  prio = 28
     if (match(line, /Move window silently to workspace/))  prio = 29
     if (match(line, /Swap window/))  prio = 30
-    if (match(line, /Focus/))  prio = 31
+    if (match(line, /Move window focus/))  prio = 31
     if (match(line, /Move window$/))  prio = 32
     if (match(line, /Resize window/))  prio = 33
     if (match(line, /Expand window/))  prio = 34

bin/omarchy-migrate

@@ -10,7 +10,7 @@ mkdir -p "$STATE_DIR"
 mkdir -p "$STATE_DIR/skipped"
 
 # Run any pending migrations
-for file in $OMARCHY_PATH/migrations/*.sh; do
+for file in ~/.local/share/omarchy/migrations/*.sh; do
   filename=$(basename "$file")
 
   if [[ ! -f $STATE_DIR/$filename && ! -f $STATE_DIR/skipped/$filename ]]; then

bin/omarchy-npx-install

@@ -18,7 +18,7 @@ mkdir -p "$HOME/.local/bin"
 
 cat > "$HOME/.local/bin/$command" <<EOF
 #!/bin/bash
-exec mise exec node@latest -- npx --yes $package "\$@"
+exec npx --yes $package "\$@"
 EOF
 
 chmod +x "$HOME/.local/bin/$command"

bin/omarchy-powerprofiles-init

@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# Set the correct power profile on boot based on current AC/battery state.
-# The udev rules only fire on state *changes*, so without this, booting
-# on AC leaves you in the default balanced mode.
-
-if omarchy-battery-present && ! omarchy-ac-present; then
-  omarchy-powerprofiles-set battery
-else
-  omarchy-powerprofiles-set ac
-fi

bin/omarchy-powerprofiles-set

@@ -1,22 +0,0 @@
-#!/bin/bash
-
-# Set the power profile to the requested level, falling back to balanced
-# if the requested profile isn't available on this machine.
-#
-# Usage: omarchy-powerprofiles-set <ac|battery>
-
-mapfile -t profiles < <(powerprofilesctl list | awk '/^\s*[* ]\s*[a-zA-Z0-9\-]+:$/ { gsub(/^[*[:space:]]+|:$/,""); print }')
-
-case "$1" in
-  ac)
-    # Prefer performance, fall back to balanced
-    if [[ " ${profiles[*]} " == *" performance "* ]]; then
-      powerprofilesctl set performance
-    else
-      powerprofilesctl set balanced
-    fi
-    ;;
-  battery)
-    powerprofilesctl set balanced
-    ;;
-esac

bin/omarchy-refresh-hyprland

@@ -7,5 +7,3 @@ omarchy-refresh-config hypr/bindings.conf
 omarchy-refresh-config hypr/input.conf
 omarchy-refresh-config hypr/looknfeel.conf
 omarchy-refresh-config hypr/hyprland.conf
-omarchy-refresh-config hypr/monitors.conf
-bash "$OMARCHY_PATH/install/config/detect-keyboard-layout.sh"

bin/omarchy-remove-preinstalls

@@ -13,10 +13,6 @@ if gum confirm "Are you sure you want to remove all preinstalled web apps, TUI w
   cp "$OMARCHY_PATH/default/hypr/plain-bindings.conf" ~/.config/hypr/bindings.conf
   hyprctl reload
 
-  # Remove npx stubs
-  rm -f ~/.local/bin/codex ~/.local/bin/gemini ~/.local/bin/copilot \
-       ~/.local/bin/opencode ~/.local/bin/playwright-cli ~/.local/bin/pi
-
   omarchy-pkg-drop \
     aether \
     typora \

bin/omarchy-restart-makima

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Restart makima - key remapping service for remapping Copilot key to Omarchy Menu
+
+sudo systemctl restart makima

bin/omarchy-restart-trackpad

@@ -1,23 +0,0 @@
-#!/bin/bash
-
-# Reset the trackpad by unbinding and rebinding its driver.
-# Covers both driver paths:
-#   - i2c_hid_acpi (DesignWare I2C, e.g. XPS 14/16 Synaptics trackpad)
-#   - intel_quicki2c (THC Touch Host Controller)
-
-# Try i2c_hid_acpi path (DesignWare I2C trackpads)
-for dev in /sys/bus/i2c/drivers/i2c_hid_acpi/i2c-*; do
-  [ -e "$dev" ] || continue
-  I2C_DEVICE=$(basename "$dev")
-  echo "Resetting $I2C_DEVICE via i2c_hid_acpi unbind/rebind..."
-  echo "$I2C_DEVICE" | sudo tee /sys/bus/i2c/drivers/i2c_hid_acpi/unbind > /dev/null
-  sleep 1
-  echo "$I2C_DEVICE" | sudo tee /sys/bus/i2c/drivers/i2c_hid_acpi/bind > /dev/null
-  echo "Done"
-done
-
-# Also try THC path
-if lsmod | grep -q intel_quicki2c; then
-  echo "Reloading intel_quicki2c..."
-  sudo modprobe -r intel_quicki2c && sudo modprobe intel_quicki2c
-fi

bin/omarchy-setup-makima

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Setup makima - key remapping service for remapping Copilot key to Omarchy Menu
+
+CONFIG_FILE="$HOME/.config/makima/AT Translated Set 2 keyboard.toml"
+
+if [[ ! -f $CONFIG_FILE ]]; then
+  omarchy-pkg-add makima-bin
+
+  mkdir -p "$HOME/.config/makima"
+  cp "$OMARCHY_PATH/default/makima/AT Translated Set 2 keyboard.toml" "$CONFIG_FILE"
+
+  sudo mkdir -p /etc/systemd/system/makima.service.d
+  sudo tee /etc/systemd/system/makima.service.d/override.conf >/dev/null <<EOF
+[Service]
+User=$USER
+Environment="MAKIMA_CONFIG=/home/$USER/.config/makima"
+EOF
+
+  sudo systemctl daemon-reload
+  sudo systemctl enable --now makima 2>/dev/null || true
+fi

bin/omarchy-sudo-passwordless-toggle

@@ -1,19 +1,12 @@
 #!/bin/bash
 
 # Toggle passwordless sudo for the current user.
-# Usage: omarchy-sudo-passwordless-toggle [MINUTES]
 # First run: enables passwordless sudo for 15 minutes (after confirmation).
 # Second run: disables it early.
 
 NOPASSWD_FILE="/etc/sudoers.d/99-omarchy-nopasswd-${USER}"
 TIMER_NAME="omarchy-nopasswd-expire-${USER}"
 
-MINUTES=${1:-15}
-if [[ $1 && ! $1 =~ ^[0-9]+$ ]]; then
-  echo "Usage: omarchy-sudo-passwordless-toggle [MINUTES]" >&2
-  exit 1
-fi
-
 # Safety: if the file exists but the timer doesn't (e.g. after reboot), clean up
 if sudo test -f "$NOPASSWD_FILE" && ! systemctl is-active "${TIMER_NAME}.timer" &>/dev/null; then
   sudo rm "$NOPASSWD_FILE"
@@ -21,37 +14,28 @@ fi
 
 # Check for the file directly — sudo -n can stay cached or be granted by other rules
 if sudo test -f "$NOPASSWD_FILE"; then
-  if [[ $1 ]]; then
-    sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
-    sudo systemd-run --on-active=${MINUTES}m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
-      rm "$NOPASSWD_FILE"
-    echo "Passwordless sudo timer updated. It will now automatically disable in ${MINUTES} minutes."
-  else
-    sudo rm "$NOPASSWD_FILE"
-    sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
-    echo "Passwordless sudo has been DISABLED. Sudo will require a password again."
-  fi
+  sudo rm "$NOPASSWD_FILE"
+  sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
+  echo "Passwordless sudo has been DISABLED. Sudo will require a password again."
 else
   echo ""
-  echo "⚠️WARNING: This will allow ANY process running as your user to"
-  echo "execute ANY command as root WITHOUT a password for ${MINUTES} minutes."
+  echo "⚠️  WARNING: This will allow ANY process running as your user to"
+  echo "execute ANY command as root WITHOUT a password for 15 minutes."
   echo ""
   echo "This is useful for AI agents that need to run sudo commands,"
   echo "but it significantly weakens the security of your system."
   echo "Anyone or anything with access to your user account gets full root."
   echo ""
-  echo "Passwordless sudo will automatically disable after ${MINUTES} minutes."
+  echo "Passwordless sudo will automatically disable after 15 minutes."
   echo "Run this command again to disable it early."
   echo ""
 
-  if gum confirm "Enable passwordless sudo for ${MINUTES} minutes? This is a significant security risk!"; then
+  if gum confirm "Enable passwordless sudo for 15 minutes? This is a significant security risk!"; then
     echo "${USER} ALL=(ALL) NOPASSWD: ALL" | sudo tee "$NOPASSWD_FILE" > /dev/null
     sudo chmod 440 "$NOPASSWD_FILE"
-    sudo systemd-run --on-active=${MINUTES}m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
+    sudo systemd-run --on-active=15m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
       rm "$NOPASSWD_FILE"
-
-    echo ""
-    echo "Passwordless sudo has been ENABLED. It will automatically disable in ${MINUTES} minutes."
+    echo "Passwordless sudo has been ENABLED. It will automatically disable in 15 minutes."
     echo "Note: if you restart before then, run omarchy-sudo-passwordless-toggle again to disable it."
   else
     echo "Aborted. No changes made."

bin/omarchy-swayosd-brightness

@@ -8,7 +8,8 @@ percent="$1"
 progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"
 
-omarchy-swayosd-client \
-  --custom-icon display-brightness-symbolic \
+swayosd-client \
+  --monitor "$(hyprctl monitors -j | jq -r '.[]|select(.focused==true).name')" \
+  --custom-icon display-brightness \
   --custom-progress "$progress" \
   --custom-progress-text "${percent}%"

bin/omarchy-swayosd-client

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Wrapper for swayosd-client that targets the currently focused monitor.
-
-exec swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)" "$@"

bin/omarchy-swayosd-kbd-brightness

@@ -8,7 +8,8 @@ percent="$1"
 progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"
 
-omarchy-swayosd-client \
-  --custom-icon keyboard-brightness-symbolic \
+swayosd-client \
+  --monitor "$(hyprctl monitors -j | jq -r '.[]|select(.focused==true).name')" \
+  --custom-icon keyboard-brightness \
   --custom-progress "$progress" \
   --custom-progress-text "${percent}%"

bin/omarchy-theme-install

@@ -15,7 +15,7 @@ if [[ -z $REPO_URL ]]; then
 fi
 
 THEMES_DIR="$HOME/.config/omarchy/themes"
-THEME_NAME=$(basename "$REPO_URL" .git | sed -E 's/^omarchy-//; s/-theme$//' | tr '[:upper:]' '[:lower:]')
+THEME_NAME=$(basename "$REPO_URL" .git | sed -E 's/^omarchy-//; s/-theme$//')
 THEME_PATH="$THEMES_DIR/$THEME_NAME"
 
 # Remove existing theme if present

bin/omarchy-theme-set-browser

@@ -13,12 +13,12 @@ if omarchy-cmd-present chromium || omarchy-cmd-present brave; then
   fi
 
   if omarchy-cmd-present chromium; then
-    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
-    pgrep -x chromium >/dev/null && chromium --refresh-platform-policy --no-startup-window &>/dev/null
+    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
+    chromium --refresh-platform-policy --no-startup-window >/dev/null
   fi
 
   if omarchy-cmd-present brave; then
-    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
-    pgrep -x brave >/dev/null && brave --refresh-platform-policy --no-startup-window &>/dev/null
+    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
+    brave --refresh-platform-policy --no-startup-window >/dev/null
   fi
 fi

bin/omarchy-theme-set-vscode

@@ -7,8 +7,9 @@ VS_CODE_THEME="$HOME/.config/omarchy/current/theme/vscode.json"
 set_theme() {
   local editor_cmd="$1"
   local settings_path="$2"
+  local skip_flag="$3"
 
-  omarchy-cmd-present "$editor_cmd" || return 0
+  omarchy-cmd-present "$editor_cmd" && [[ ! -f $skip_flag ]] || return 0
 
   if [[ -f $VS_CODE_THEME ]]; then
     theme_name=$(jq -r '.name' "$VS_CODE_THEME")
@@ -33,7 +34,6 @@ set_theme() {
   fi
 }
 
-! omarchy-toggle-enabled skip-vscode-theme-changes && set_theme "code" "$HOME/.config/Code/User/settings.json"
-! omarchy-toggle-enabled skip-vscode-insiders-theme-changes && set_theme "code-insiders" "$HOME/.config/Code - Insiders/User/settings.json"
-! omarchy-toggle-enabled skip-codium-theme-changes && set_theme "codium" "$HOME/.config/VSCodium/User/settings.json"
-! omarchy-toggle-enabled skip-cursor-theme-changes && set_theme "cursor" "$HOME/.config/Cursor/User/settings.json"
+set_theme "code" "$HOME/.config/Code/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-vscode-theme-changes"
+set_theme "codium" "$HOME/.config/VSCodium/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-codium-theme-changes"
+set_theme "cursor" "$HOME/.config/Cursor/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-cursor-theme-changes"

bin/omarchy-toggle

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-# Toggle Omarchy features between enabled and disabled
-
-ENABLED_NOTIFICATION=""
-DISABLED_NOTIFICATION=""
-
-while [[ $# -gt 1 ]]; do
-  case $1 in
-    --enabled-notification) ENABLED_NOTIFICATION="$2"; shift 2 ;;
-    --disabled-notification) DISABLED_NOTIFICATION="$2"; shift 2 ;;
-    *) break ;;
-  esac
-done
-
-FLAG_NAME="$1"
-FLAG="$HOME/.local/state/omarchy/toggles/$FLAG_NAME"
-
-if [[ -f $FLAG ]]; then
-  rm $FLAG
-  [[ -n $DISABLED_NOTIFICATION ]] && notify-send -u low "$DISABLED_NOTIFICATION"
-else
-  mkdir -p "$(dirname $FLAG)"
-  touch $FLAG
-  [[ -n $ENABLED_NOTIFICATION ]] && notify-send -u low "$ENABLED_NOTIFICATION"
-fi

bin/omarchy-toggle-enabled

@@ -1,4 +0,0 @@
-#!/bin/bash
-
-# Check if a toggle is enabled (flag file exists)
-[[ -f "$HOME/.local/state/omarchy/toggles/$1" ]]

bin/omarchy-toggle-idle

@@ -2,10 +2,10 @@
 
 if pgrep -x hypridle >/dev/null; then
   pkill -x hypridle
-  notify-send -u low "󱫖    Stop locking computer when idle"
+  notify-send "󱫖    Stop locking computer when idle"
 else
   uwsm-app -- hypridle >/dev/null 2>&1 &
-  notify-send -u low "󱫖    Now locking computer when idle"
+  notify-send "󱫖    Now locking computer when idle"
 fi
 
 pkill -RTMIN+9 waybar

bin/omarchy-toggle-nightlight

@@ -21,10 +21,10 @@ restart_nightlighted_waybar() {
 
 if [[ $CURRENT_TEMP == $OFF_TEMP ]]; then
   hyprctl hyprsunset temperature $ON_TEMP
-  notify-send -u low "  Nightlight screen temperature"
+  notify-send "  Nightlight screen temperature"
   restart_nightlighted_waybar
 else
   hyprctl hyprsunset temperature $OFF_TEMP
-  notify-send -u low "   Daylight screen temperature"
+  notify-send "   Daylight screen temperature"
   restart_nightlighted_waybar
 fi

bin/omarchy-toggle-notification-silencing

@@ -3,9 +3,9 @@
 makoctl mode -t do-not-disturb
 
 if makoctl mode | grep -q 'do-not-disturb'; then
-  notify-send -u low "󰂛    Silenced notifications"
+  notify-send "󰂛    Silenced notifications"
 else
-  notify-send -u low "󰂚    Enabled notifications"
+  notify-send "󰂚    Enabled notifications"
 fi
 
 pkill -RTMIN+10 waybar

bin/omarchy-toggle-screensaver

@@ -1,6 +1,12 @@
 #!/bin/bash
 
-omarchy-toggle \
-  --enabled-notification "󱄄   Screensaver disabled" \
-  --disabled-notification "󱄄   Screensaver enabled" \
-  screensaver-off
+STATE_FILE=~/.local/state/omarchy/toggles/screensaver-off
+
+if [[ -f $STATE_FILE ]]; then
+  rm -f $STATE_FILE
+  notify-send "󱄄   Screensaver enabled"
+else
+  mkdir -p "$(dirname $STATE_FILE)"
+  touch $STATE_FILE
+  notify-send "󱄄   Screensaver disabled"
+fi

bin/omarchy-toggle-suspend

@@ -1,6 +1,12 @@
 #!/bin/bash
 
-omarchy-toggle \
-  --enabled-notification "󰒲   Suspend removed from system menu" \
-  --disabled-notification "󰒲   Suspend now available in system menu" \
-  suspend-off
+STATE_FILE=~/.local/state/omarchy/toggles/suspend-off
+
+if [[ -f $STATE_FILE ]]; then
+  rm -f $STATE_FILE
+  notify-send "󰒲   Suspend now available in system menu"
+else
+  mkdir -p "$(dirname $STATE_FILE)"
+  touch $STATE_FILE
+  notify-send "󰒲   Suspend removed from system menu"
+fi

bin/omarchy-toggle-touchpad

@@ -1,29 +0,0 @@
-#!/bin/bash
-
-STATE_CONF="$HOME/.local/state/omarchy/toggles/hypr/touchpad-disabled.conf"
-
-device="$(omarchy-hw-touchpad)"
-
-if [[ -z $device ]]; then
-  echo "No touchpad device found" >&2
-  exit 1
-fi
-
-enable() {
-  hyprctl keyword "device[$device]:enabled" true >/dev/null
-  rm -f "$STATE_CONF"
-  omarchy-swayosd-client --custom-icon input-touchpad-symbolic --custom-message "Touchpad enabled"
-}
-
-disable() {
-  hyprctl keyword "device[$device]:enabled" false >/dev/null
-  mkdir -p "$(dirname "$STATE_CONF")"
-  printf 'device {\n    name = %s\n    enabled = false\n}\n' "$device" > "$STATE_CONF"
-  omarchy-swayosd-client --custom-icon touchpad-disabled-symbolic --custom-message "Touchpad disabled"
-}
-
-case "${1:-toggle}" in
-  on) enable ;;
-  off) disable ;;
-  toggle) if [[ -f $STATE_CONF ]]; then enable; else disable; fi ;;
-esac

bin/omarchy-toggle-waybar

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-omarchy-toggle waybar-off
-
 if pgrep -x waybar >/dev/null; then
   pkill -x waybar
 else

bin/omarchy-update

@@ -2,13 +2,6 @@
 
 set -e
 
-# Run the update inside a PTY so pacman/yay keep showing download progress
-# while still logging the full session for later analysis.
-if [[ -z $OMARCHY_UPDATE_LOGGED ]]; then
-  script_command=$(printf '%q ' "$0" "$@")
-  exec env OMARCHY_UPDATE_LOGGED=1 script -qefc "$script_command" "/tmp/omarchy-update.log"
-fi
-
 trap 'echo ""; echo -e "\033[0;31mSomething went wrong during the update!\n\nPlease review the output above carefully, correct the error, and retry the update.\n\nIf you need assistance, get help from the community at https://omarchy.org/discord\033[0m"' ERR
 
 if [[ $1 == "-y" ]] || omarchy-update-confirm; then

bin/omarchy-update-firmware

@@ -1,8 +1,5 @@
 #!/bin/bash
 
-# Update system firmware using fwupd. Ensures the fwupd EFI binary is installed
-# in the ESP so UEFI capsule updates work with the Limine bootloader.
-
 set -e
 echo -e "\e[32mUpdate Firmware\e[0m"
 
@@ -10,9 +7,5 @@ if omarchy-cmd-missing fwupdmgr; then
   omarchy-pkg-add fwupd
 fi
 
-if [[ -d /sys/firmware/efi ]] && [[ -f /usr/lib/fwupd/efi/fwupdx64.efi ]]; then
-  sudo install -D /usr/lib/fwupd/efi/fwupdx64.efi /boot/EFI/arch/fwupdx64.efi
-fi
-
 fwupdmgr refresh --force
 sudo fwupdmgr update

bin/omarchy-update-git

@@ -6,10 +6,5 @@ echo -e "\e[32mUpdate Omarchy\e[0m"
 
 omarchy-update-time
 
-# Suppress Hyprland config errors while git updates default config files mid-pull
-hyprctl keyword debug:suppress_errors true &>/dev/null || true
-
 git -C $OMARCHY_PATH pull --autostash
 git -C $OMARCHY_PATH --no-pager diff --check || git -C $OMARCHY_PATH reset --merge
-
-hyprctl reload &>/dev/null || true

bin/omarchy-update-perform

@@ -5,6 +5,10 @@ set -e
 # Ensure screensaver/sleep doesn't set in during updates
 hyprctl dispatch tagwindow +noidle &>/dev/null || true
 
+# Capture update logs (CLICOLOR_FORCE keeps gum styled when stdout is piped through tee)
+export CLICOLOR_FORCE=1
+exec > >(tee "/tmp/omarchy-update.log") 2>&1
+
 # Perform all update steps
 omarchy-update-keyring
 omarchy-update-available-reset

bin/omarchy-update-restart

@@ -2,7 +2,7 @@
 
 echo
 
-if find /usr/lib/modules -maxdepth 2 -name vmlinuz -newermt "$(uptime -s)" 2>/dev/null | grep -q .; then
+if [[ ! -d /usr/lib/modules/$(uname -r) ]]; then
   gum confirm "Linux kernel has been updated. Reboot?" && omarchy-system-reboot
 elif [[ -f $HOME/.local/state/omarchy/reboot-required ]]; then
   gum confirm "Updates require reboot. Ready?" && omarchy-system-reboot

bin/omarchy-voxtype-install

@@ -11,9 +11,6 @@ if gum confirm "Install Voxtype + AI model (~150MB) to enable dictation?"; then
   cp $OMARCHY_PATH/default/voxtype/config.toml ~/.config/voxtype/
 
   voxtype setup --download --no-post-install
-  if omarchy-hw-vulkan; then
-    voxtype setup gpu --enable || true
-  fi
   voxtype setup systemd
 
   omarchy-restart-waybar

bin/omarchy-voxtype-status

@@ -1,8 +1,5 @@
 #!/bin/bash
 
-# Clean up the voxtype --follow child when Waybar reloads
-trap 'kill 0' EXIT
-
 if omarchy-cmd-present voxtype; then
   voxtype status --follow --extended --format json | while read -r line; do
     echo "$line" | jq -c '. + {alt: .class}'

config/Typora/themes/ia_typora_night.css

@@ -8,7 +8,7 @@
   --light-header-color: #dbdbdb; /* H1-H3 */
   --select-text-bg-color: #186a9a;
   --accent-color: #4f525a;
-  --background-color: #000000;
+  --background-color: #101010;
   --font-color: #bbbcbc;
   --header-color: #bebebe; /* H4-H6 */
   --border-color: #232629;

config/autostart/org.fcitx.Fcitx5.desktop

@@ -1,2 +0,0 @@
-[Desktop Entry]
-Hidden=true

config/btop/btop.conf

@@ -1,18 +1,18 @@
-#? Config file for btop v.1.4.6
+#? Config file for btop
 
 #* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
 #* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
 color_theme = "current"
 
 #* If the theme set background should be shown, set to False if you want terminal background transparency.
-theme_background = true
+theme_background = True
 
 #* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
-truecolor = true
+truecolor = True
 
 #* Set to true to force tty mode regardless if a real tty has been detected or not.
 #* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
-force_tty = false
+force_tty = False
 
 #* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
 #* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
@@ -22,13 +22,10 @@ presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:defaul
 
 #* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
 #* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
-vim_keys = true
+vim_keys = True
 
 #* Rounded corners on boxes, is ignored if TTY mode is ON.
-rounded_corners = true
-
-#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
-terminal_sync = true
+rounded_corners = True
 
 #* Default symbols to use for graph creation, "braille", "block" or "tty".
 #* "braille" offers the highest resolution but might not be included in all fonts.
@@ -63,40 +60,37 @@ update_ms = 2000
 proc_sorting = "cpu lazy"
 
 #* Reverse sorting order, True or False.
-proc_reversed = false
+proc_reversed = False
 
 #* Show processes as a tree.
-proc_tree = false
+proc_tree = False
 
 #* Use the cpu graph colors in the process list.
-proc_colors = true
+proc_colors = True
 
 #* Use a darkening gradient in the process list.
-proc_gradient = true
+proc_gradient = True
 
 #* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
-proc_per_core = false
+proc_per_core = False
 
 #* Show process memory as bytes instead of percent.
-proc_mem_bytes = true
+proc_mem_bytes = True
 
 #* Show cpu graph for each process.
-proc_cpu_graphs = true
+proc_cpu_graphs = True
 
 #* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
-proc_info_smaps = false
+proc_info_smaps = False
 
 #* Show proc box on left side of screen instead of right.
-proc_left = false
+proc_left = False
 
 #* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
-proc_filter_kernel = false
+proc_filter_kernel = False
 
 #* In tree-view, always accumulate child process resources in the parent process.
-proc_aggregate = false
-
-#* Should cpu and memory usage display be preserved for dead processes when paused.
-keep_dead_proc_usage = false
+proc_aggregate = False
 
 #* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
 #* Select from a list of detected attributes from the options menu.
@@ -110,28 +104,25 @@ cpu_graph_lower = "Auto"
 show_gpu_info = "Auto"
 
 #* Toggles if the lower CPU graph should be inverted.
-cpu_invert_lower = true
+cpu_invert_lower = True
 
 #* Set to True to completely disable the lower CPU graph.
-cpu_single_graph = false
+cpu_single_graph = False
 
 #* Show cpu box at bottom of screen instead of top.
-cpu_bottom = false
+cpu_bottom = False
 
 #* Shows the system uptime in the CPU box.
-show_uptime = true
-
-#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
-show_cpu_watts = true
+show_uptime = True
 
 #* Show cpu temperature.
-check_temp = true
+check_temp = True
 
 #* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
 cpu_sensor = "Auto"
 
 #* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
-show_coretemp = true
+show_coretemp = True
 
 #* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
 #* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
@@ -143,66 +134,63 @@ cpu_core_map = ""
 temp_scale = "celsius"
 
 #* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
-base_10_sizes = false
+base_10_sizes = False
 
 #* Show CPU frequency.
-show_cpu_freq = true
-
-#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
-freq_mode = "first"
+show_cpu_freq = True
 
 #* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
 #* Special formatting: /host = hostname | /user = username | /uptime = system uptime
 clock_format = "%X"
 
 #* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
-background_update = true
+background_update = True
 
 #* Custom cpu model name, empty string to disable.
 custom_cpu_name = ""
 
 #* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
-#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
+#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
 disks_filter = ""
 
 #* Show graphs instead of meters for memory values.
-mem_graphs = true
+mem_graphs = True
 
 #* Show mem box below net box instead of above.
-mem_below_net = false
+mem_below_net = False
 
 #* Count ZFS ARC in cached and available memory.
-zfs_arc_cached = true
+zfs_arc_cached = True
 
 #* If swap memory should be shown in memory box.
-show_swap = true
+show_swap = True
 
 #* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
-swap_disk = true
+swap_disk = True
 
 #* If mem box should be split to also show disks info.
-show_disks = true
+show_disks = True
 
 #* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
-only_physical = true
+only_physical = True
 
 #* Read disks list from /etc/fstab. This also disables only_physical.
-use_fstab = true
+use_fstab = True
 
 #* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
-zfs_hide_datasets = false
+zfs_hide_datasets = False
 
 #* Set to true to show available disk space for privileged users.
-disk_free_priv = false
+disk_free_priv = False
 
 #* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
-show_io_stat = true
+show_io_stat = True
 
 #* Toggles io mode for disks, showing big graphs for disk read/write speeds.
-io_mode = false
+io_mode = False
 
 #* Set to True to show combined read/write io graphs in io mode.
-io_graph_combined = false
+io_graph_combined = False
 
 #* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
 #* Example: "/mnt/media:100 /:20 /boot:1".
@@ -214,44 +202,29 @@ net_download = 100
 net_upload = 100
 
 #* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
-net_auto = true
+net_auto = True
 
 #* Sync the auto scaling for download and upload to whichever currently has the highest scale.
-net_sync = true
+net_sync = True
 
 #* Starts with the Network Interface specified here.
 net_iface = ""
 
-#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
-base_10_bitrate = "Auto"
-
 #* Show battery stats in top right if battery is present.
-show_battery = true
+show_battery = True
 
 #* Which battery to use if multiple are present. "Auto" for auto detection.
 selected_battery = "Auto"
 
-#* Show power stats of battery next to charge indicator.
-show_battery_watts = true
-
-#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
 #* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
 log_level = "WARNING"
 
-#* Automatically save current settings to config file on exit.
-save_config_on_exit = true
-
 #* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
-nvml_measure_pcie_speeds = true
-
-#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
-rsmi_measure_pcie_speeds = true
+nvml_measure_pcie_speeds = True
 
 #* Horizontally mirror the GPU graph.
-gpu_mirror_graph = true
-
-#* Set which GPU vendors to show. Available values are "nvidia amd intel"
-shown_gpus = "nvidia amd intel"
+gpu_mirror_graph = True
 
 #* Custom gpu0 model name, empty string to disable.
 custom_gpu_name0 = ""
@@ -270,3 +243,4 @@ custom_gpu_name4 = ""
 
 #* Custom gpu5 model name, empty string to disable.
 custom_gpu_name5 = ""
+

config/hypr/bindings.conf

@@ -32,8 +32,3 @@ bindd = SUPER SHIFT ALT, X, X Post, exec, omarchy-launch-webapp "https://x.com/c
 # Overwrite existing bindings, like putting Omarchy Menu on Super + Space
 # unbind = SUPER, SPACE
 # bindd = SUPER, SPACE, Omarchy menu, exec, omarchy-menu
-
-# Logitech MX Keys
-# bind = SUPER SHIFT, S, exec, omarchy-cmd-screenshot          # Print Screen Button
-# bind = SUPER, H, exec, voxtype record toggle                 # Dictation Button
-# bind = SUPER, PERIOD, exec, omarchy-launch-walker -m symbols # Emoji Button

config/hypr/hyprland.conf

@@ -19,8 +19,5 @@ source = ~/.config/hypr/bindings.conf
 source = ~/.config/hypr/looknfeel.conf
 source = ~/.config/hypr/autostart.conf
 
-# Toggle config flags dynamically
-source = ~/.local/state/omarchy/toggles/hypr/*.conf
-
 # Add any other personal Hyprland configuration below
 # windowrule = workspace 5, match:class qemu

config/hypr/input.conf

@@ -11,7 +11,7 @@ input {
 
   # Change speed of keyboard repeat
   repeat_rate = 40
-  repeat_delay = 250
+  repeat_delay = 600
 
   # Start with numlock on by default
   numlock_by_default = true

config/hypr/monitors.conf

@@ -21,6 +21,3 @@ monitor=,preferred,auto,auto
 # Example for Framework 13 w/ 6K XDR Apple display
 # monitor = DP-5, 6016x3384@60, auto, 2
 # monitor = eDP-1, 2880x1920@120, auto, 2
-
-# Disable the second ghost monitor on an Apple 6K XDR over Thunderbolt
-# monitor=DP-2,disable

config/omarchy/hooks/font-set.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show the name of the theme that was just set.
-# notify-send -u low "New font" "Your new font is $1"
+# notify-send "New font" "Your new font is $1"

config/omarchy/hooks/post-update.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show notification after the system has been updated.
-# notify-send -u low "Update Performed" "Your system is now up to date"
+# notify-send "Update Performed" "Your system is now up to date"

config/omarchy/hooks/theme-set.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show the name of the theme that was just set.
-# notify-send -u low "New theme" "Your new theme is $1"
+# notify-send "New theme" "Your new theme is $1"

config/systemd/user/omarchy-recover-internal-monitor.service

@@ -1,11 +0,0 @@
-[Unit]
-Description=Recover the internal monitor toggle when no external display is connected
-Before=graphical-session-pre.target
-ConditionPathExists=%h/.local/state/omarchy/toggles/hypr/internal-monitor-disable.conf
-
-[Service]
-Type=oneshot
-ExecStart=%h/.local/share/omarchy/bin/omarchy-hw-recover-internal-monitor
-
-[Install]
-WantedBy=graphical-session-pre.target

config/waybar/config.jsonc

@@ -72,8 +72,8 @@
     "format-wifi": "{icon}",
     "format-ethernet": "󰀂",
     "format-disconnected": "󰤮",
-    "tooltip-format-wifi": "{essid} ({frequency} GHz)",
-    "tooltip-format-ethernet": "Connected",
+    "tooltip-format-wifi": "{essid} ({frequency} GHz)\n⇣{bandwidthDownBytes}  ⇡{bandwidthUpBytes}",
+    "tooltip-format-ethernet": "⇣{bandwidthDownBytes}  ⇡{bandwidthUpBytes}",
     "tooltip-format-disconnected": "Disconnected",
     "interval": 3,
     "spacing": 1,

default/bash/aliases

@@ -44,11 +44,10 @@ alias ....='cd ../../..'
 
 # Tools
 alias c='opencode'
-alias cx='printf "\033[2J\033[3J\033[H" && claude --permission-mode bypassPermissions'
+alias cx='printf "\033[2J\033[3J\033[H" && claude --allow-dangerously-skip-permissions'
 alias d='docker'
 alias r='rails'
 alias t='tmux attach || tmux new -s Work'
-alias i='tdl c cx'
 n() { if [ "$#" -eq 0 ]; then command nvim . ; else command nvim "$@"; fi; }
 
 # Git

default/bash/fns/transcoding

@@ -13,31 +13,23 @@ img2jpg() {
   img="$1"
   shift
 
-  magick "$img" "$@" -quality 85 -strip "${img%.*}-converted.jpg"
+  magick "$img" "$@" -quality 95 -strip "${img%.*}-converted.jpg"
 }
 
-# Transcode any image to a small JPG (max 1080px wide)
+# Transcode any image to a small JPG (max 1080px wide) that's great for sharing online
 img2jpg-small() {
   img="$1"
   shift
 
-  magick "$img" "$@" -resize 1080x\> -quality 85 -strip "${img%.*}-small.jpg"
+  magick "$img" "$@" -resize 1080x\> -quality 95 -strip "${img%.*}-small.jpg"
 }
 
-# Transcode any image to a 4K JPG (max 2160px wide)
+# Transcode any image to a medium JPG (max 1800px wide) that's great for sharing online
 img2jpg-medium() {
   img="$1"
   shift
 
-  magick "$img" "$@" -resize 2160x\> -quality 85 -strip "${img%.*}-medium.jpg"
-}
-
-# Transcode any image to a 6K JPG (max 3160px wide)
-img2jpg-large() {
-  img="$1"
-  shift
-
-  magick "$img" "$@" -resize 3160x\> -quality 85 -strip "${img%.*}-large.jpg"
+  magick "$img" "$@" -resize 1800x\> -quality 95 -strip "${img%.*}-medium.jpg"
 }
 
 # Transcode any image to compressed-but-lossless PNG

default/bash/fns/worktrees

@@ -7,11 +7,11 @@ ga() {
 
   local branch="$1"
   local base="$(basename "$PWD")"
-  local wt_path="../${base}--${branch}"
+  local path="../${base}--${branch}"
 
-  git worktree add -b "$branch" "$wt_path"
-  mise trust "$wt_path"
-  cd "$wt_path"
+  git worktree add -b "$branch" "$path"
+  mise trust "$path"
+  cd "$path"
 }
 
 # Remove worktree and branch from within active worktree directory.

default/bash/init

@@ -2,7 +2,7 @@ if command -v mise &> /dev/null; then
   eval "$(mise activate bash)"
 fi
 
-if [[ $- == *i* ]] && [[ ${TERM:-} != "dumb" ]] && command -v starship &> /dev/null; then
+if command -v starship &> /dev/null; then
   eval "$(starship init bash)"
 fi
 
@@ -11,11 +11,7 @@ if command -v zoxide &> /dev/null; then
 fi
 
 if command -v try &> /dev/null; then
-  try() {
-    unset -f try
-    eval "$(SHELL=/bin/bash command try init ~/Work/tries)"
-    try "$@"
-  }
+  eval "$(SHELL=/bin/bash command try init ~/Work/tries)"
 fi
 
 if command -v fzf &> /dev/null; then

default/elephant/omarchy_themes.lua

@@ -28,15 +28,6 @@ local function first_image_in_dir(dir)
   return nil
 end
 
--- Find preview.png, preview.jpg, or first backgrounds/ image in a theme dir
-local function find_preview_path(dir)
-  local png = dir .. "/preview.png"
-  local jpg = dir .. "/preview.jpg"
-  if file_exists(png) then return png end
-  if file_exists(jpg) then return jpg end
-  return first_image_in_dir(dir .. "/backgrounds")
-end
-
 -- The main function elephant will call
 function GetEntries()
   local entries = {}
@@ -60,10 +51,19 @@ function GetEntries()
       if theme_name and not seen_themes[theme_name] then
         seen_themes[theme_name] = true
 
-        -- Check the theme dir, then fall back to the default theme dir
-        -- (for partial user customizations that don't ship a preview)
-        local preview_path = find_preview_path(theme_path)
-          or find_preview_path(default_theme_dir .. "/" .. theme_name)
+        -- Check for preview images directly (no subprocess)
+        local preview_path = nil
+        local preview_png = theme_path .. "/preview.png"
+        local preview_jpg = theme_path .. "/preview.jpg"
+
+        if file_exists(preview_png) then
+          preview_path = preview_png
+        elseif file_exists(preview_jpg) then
+          preview_path = preview_jpg
+        else
+          -- Fallback: get first image from backgrounds (one ls call)
+          preview_path = first_image_in_dir(theme_path .. "/backgrounds")
+        end
 
         if preview_path and preview_path ~= "" then
           local display_name = theme_name:gsub("_", " "):gsub("%-", " ")

default/hypr/apps.conf

@@ -3,6 +3,7 @@ source = ~/.local/share/omarchy/default/hypr/apps/1password.conf
 source = ~/.local/share/omarchy/default/hypr/apps/bitwarden.conf
 source = ~/.local/share/omarchy/default/hypr/apps/browser.conf
 source = ~/.local/share/omarchy/default/hypr/apps/hyprshot.conf
+source = ~/.local/share/omarchy/default/hypr/apps/jetbrains.conf
 source = ~/.local/share/omarchy/default/hypr/apps/localsend.conf
 source = ~/.local/share/omarchy/default/hypr/apps/pip.conf
 source = ~/.local/share/omarchy/default/hypr/apps/qemu.conf
@@ -12,7 +13,6 @@ source = ~/.local/share/omarchy/default/hypr/apps/geforce.conf
 source = ~/.local/share/omarchy/default/hypr/apps/moonlight.conf
 source = ~/.local/share/omarchy/default/hypr/apps/system.conf
 source = ~/.local/share/omarchy/default/hypr/apps/telegram.conf
-source = ~/.local/share/omarchy/default/hypr/apps/typora.conf
 source = ~/.local/share/omarchy/default/hypr/apps/terminals.conf
 source = ~/.local/share/omarchy/default/hypr/apps/walker.conf
 source = ~/.local/share/omarchy/default/hypr/apps/webcam-overlay.conf

default/hypr/apps/browser.conf

@@ -14,6 +14,3 @@ windowrule = tile on, match:tag chromium-based-browser
 # Only a subtle opacity change, but not for video sites
 windowrule = opacity 1.0 0.97, match:tag chromium-based-browser
 windowrule = opacity 1.0 0.97, match:tag firefox-based-browser
-
-# Hide the screen-sharing notification bar (the "Hide" button on it is broken on Wayland)
-windowrule = workspace special silent, match:title .*is sharing.*

default/hypr/apps/jetbrains.conf

@@ -0,0 +1,41 @@
+# Fix splash screen showing in weird places and prevent annoying focus takeovers
+windowrule {
+    name = jetbrains-splash
+    match:class = ^(jetbrains-.*)$
+    match:title = ^(splash)$
+    match:float = 1
+    tag = +jetbrains-splash
+    center = on
+    no_focus = on
+    border_size = 0
+}
+
+# Center popups/find windows
+windowrule {
+    name = jetbrains-popup
+    match:class = ^(jetbrains-.*)
+    match:title = ^(| )$
+    match:float = 1
+    tag = +jetbrains
+    center = on
+    # Enabling this makes it possible to provide input in popup dialogs (search window, new file, etc.)
+    stay_focused = on
+    border_size = 0
+    min_size = (monitor_w*0.5) (monitor_h*0.5)
+  }
+
+# Disable window flicker when autocomplete or tooltips appear
+windowrule {
+    name = jetbrains-tooltip
+    match:class = ^(jetbrains-.*)$
+    match:title = ^(win.*)$
+    match:float = 1
+    no_initial_focus = on
+}
+
+# Disable mouse focus
+windowrule {
+    name = jetbrains-focus
+    no_follow_mouse = on
+    match:class = ^(jetbrains-.*)$
+}

default/hypr/apps/typora.conf

@@ -1,2 +0,0 @@
-# Float Typora print dialog
-windowrule = match:class ^Typora$, match:title ^Print$, float on, center on

default/hypr/autostart.conf

@@ -1,13 +1,11 @@
 exec-once = uwsm-app -- hypridle
 exec-once = uwsm-app -- mako
-exec-once = ! omarchy-toggle-enabled waybar-off && uwsm-app -- waybar
+exec-once = uwsm-app -- waybar
 exec-once = uwsm-app -- fcitx5 --disable notificationitem
 exec-once = uwsm-app -- swaybg -i ~/.config/omarchy/current/background -m fill
 exec-once = uwsm-app -- swayosd-server
 exec-once = /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
 exec-once = omarchy-cmd-first-run
-exec-once = omarchy-powerprofiles-init
-exec-once = uwsm-app -- omarchy-hyprland-monitor-watch
 
 # Slow app launch fix -- set systemd vars
 exec-once = systemctl --user import-environment $(env | cut -d'=' -f 1)

default/hypr/bindings/media.conf

@@ -1,28 +1,28 @@
+# Only display the OSD on the currently focused monitor
+$osdclient = swayosd-client --monitor "$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"
+
 # Laptop multimedia keys for volume and LCD brightness (with OSD)
-bindeld = ,XF86AudioRaiseVolume, Volume up, exec, omarchy-swayosd-client --output-volume raise
-bindeld = ,XF86AudioLowerVolume, Volume down, exec, omarchy-swayosd-client --output-volume lower
-bindeld = ,XF86AudioMute, Mute, exec, omarchy-swayosd-client --output-volume mute-toggle
-bindeld = ,XF86AudioMicMute, Mute microphone, exec, omarchy-cmd-mic-mute
+bindeld = ,XF86AudioRaiseVolume, Volume up, exec, $osdclient --output-volume raise
+bindeld = ,XF86AudioLowerVolume, Volume down, exec, $osdclient --output-volume lower
+bindeld = ,XF86AudioMute, Mute, exec, $osdclient --output-volume mute-toggle
+bindeld = ,XF86AudioMicMute, Mute microphone, exec, $osdclient --input-volume mute-toggle
 bindeld = ,XF86MonBrightnessUp, Brightness up, exec, omarchy-brightness-display +5%
 bindeld = ,XF86MonBrightnessDown, Brightness down, exec, omarchy-brightness-display 5%-
 bindeld = ,XF86KbdBrightnessUp, Keyboard brightness up, exec, omarchy-brightness-keyboard up
 bindeld = ,XF86KbdBrightnessDown, Keyboard brightness down, exec, omarchy-brightness-keyboard down
 bindld = ,XF86KbdLightOnOff, Keyboard backlight cycle, exec, omarchy-brightness-keyboard cycle
-bindld = ,XF86TouchpadToggle, Toggle touchpad, exec, omarchy-toggle-touchpad
-bindld = ,XF86TouchpadOn, Enable touchpad, exec, omarchy-toggle-touchpad on
-bindld = ,XF86TouchpadOff, Disable touchpad, exec, omarchy-toggle-touchpad off
 
 # Precise 1% multimedia adjustments with Alt modifier
-bindeld = ALT, XF86AudioRaiseVolume, Volume up precise, exec, omarchy-swayosd-client --output-volume +1
-bindeld = ALT, XF86AudioLowerVolume, Volume down precise, exec, omarchy-swayosd-client --output-volume -1
+bindeld = ALT, XF86AudioRaiseVolume, Volume up precise, exec, $osdclient --output-volume +1
+bindeld = ALT, XF86AudioLowerVolume, Volume down precise, exec, $osdclient --output-volume -1
 bindeld = ALT, XF86MonBrightnessUp, Brightness up precise, exec, omarchy-brightness-display +1%
 bindeld = ALT, XF86MonBrightnessDown, Brightness down precise, exec, omarchy-brightness-display 1%-
 
 # Requires playerctl
-bindld = , XF86AudioNext, Next track, exec, omarchy-swayosd-client --playerctl next
-bindld = , XF86AudioPause, Pause, exec, omarchy-swayosd-client --playerctl play-pause
-bindld = , XF86AudioPlay, Play, exec, omarchy-swayosd-client --playerctl play-pause
-bindld = , XF86AudioPrev, Previous track, exec, omarchy-swayosd-client --playerctl previous
+bindld = , XF86AudioNext, Next track, exec, $osdclient --playerctl next
+bindld = , XF86AudioPause, Pause, exec, $osdclient --playerctl play-pause
+bindld = , XF86AudioPlay, Play, exec, $osdclient --playerctl play-pause
+bindld = , XF86AudioPrev, Previous track, exec, $osdclient --playerctl previous
 
 # Switch audio output with Super + Mute
 bindld = SUPER, XF86AudioMute, Switch audio output, exec, omarchy-cmd-audio-switch

default/hypr/bindings/tiling-v2.conf

@@ -13,10 +13,10 @@ bindd = SUPER, O, Pop window out (float & pin), exec, omarchy-hyprland-window-po
 bindd = SUPER, L, Toggle workspace layout, exec, omarchy-hyprland-workspace-layout-toggle
 
 # Move focus with SUPER + arrow keys
-bindd = SUPER, LEFT, Focus on left window, movefocus, l
-bindd = SUPER, RIGHT, Focus on right window, movefocus, r
-bindd = SUPER, UP, Focus on above window, movefocus, u
-bindd = SUPER, DOWN, Focus on below window, movefocus, d
+bindd = SUPER, LEFT, Move window focus left, movefocus, l
+bindd = SUPER, RIGHT, Move window focus right, movefocus, r
+bindd = SUPER, UP, Move window focus up, movefocus, u
+bindd = SUPER, DOWN, Move window focus down, movefocus, d
 
 # Switch workspaces with SUPER + [1-9; 0]
 bindd = SUPER, code:10, Switch to workspace 1, workspace, 1
@@ -76,15 +76,11 @@ bindd = SUPER SHIFT, UP, Swap window up, swapwindow, u
 bindd = SUPER SHIFT, DOWN, Swap window down, swapwindow, d
 
 # Cycle through applications on active workspace
-bindd = ALT, TAB, Focus on next window, cyclenext
-bindd = ALT SHIFT, TAB, Focus on previous window, cyclenext, prev
+bindd = ALT, TAB, Cycle to next window, cyclenext
+bindd = ALT SHIFT, TAB, Cycle to prev window, cyclenext, prev
 bindd = ALT, TAB, Reveal active window on top, bringactivetotop
 bindd = ALT SHIFT, TAB, Reveal active window on top, bringactivetotop
 
-# Cycle through monitors
-bindd = CTRL ALT, TAB, Focus on next monitor, focusmonitor, +1
-bindd = CTRL ALT SHIFT, TAB, Focus on previous monitor, focusmonitor, -1
-
 # Resize active window
 bindd = SUPER, code:20, Expand window left, resizeactive, -100 0    # - key
 bindd = SUPER, code:21, Shrink window left, resizeactive, 100 0     # = key
@@ -128,6 +124,5 @@ bindd = SUPER ALT, code:12, Switch to group window 3, changegroupactive, 3
 bindd = SUPER ALT, code:13, Switch to group window 4, changegroupactive, 4
 bindd = SUPER ALT, code:14, Switch to group window 5, changegroupactive, 5
 
-# Cycle monitor scaling with SUPER + /
-bindd = SUPER, code:61, Cycle monitor scaling, exec, omarchy-hyprland-monitor-scaling-cycle
-bindd = SUPER ALT, code:61, Cycle monitor scaling backwards, exec, omarchy-hyprland-monitor-scaling-cycle --reverse
+# Cycle monitor scaling
+bindd = SUPER, Slash, Cycle monitor scaling, exec, omarchy-hyprland-monitor-scaling-cycle

default/hypr/bindings/utilities.conf

@@ -3,9 +3,7 @@ bindd = SUPER, SPACE, Launch apps, exec, omarchy-launch-walker
 bindd = SUPER CTRL, E, Emoji picker, exec, omarchy-launch-walker -m symbols
 bindd = SUPER CTRL, C, Capture menu, exec, omarchy-menu capture
 bindd = SUPER CTRL, O, Toggle menu, exec, omarchy-menu toggle
-bindd = SUPER CTRL, H, Hardware menu, exec, omarchy-menu hardware
 bindd = SUPER ALT, SPACE, Omarchy menu, exec, omarchy-menu
-bindd = SUPER SHIFT, code:201, Omarchy menu, exec, omarchy-menu
 bindd = SUPER, ESCAPE, System menu, exec, omarchy-menu system
 bindld = , XF86PowerOff, Power menu, exec, omarchy-menu system
 bindd = SUPER, K, Show key bindings, exec, omarchy-menu-keybindings
@@ -15,7 +13,7 @@ bindd = , XF86Calculator, Calculator, exec, gnome-calculator
 bindd = SUPER SHIFT, SPACE, Toggle top bar, exec, omarchy-toggle-waybar
 bindd = SUPER CTRL, SPACE, Theme background menu, exec, omarchy-menu background
 bindd = SUPER SHIFT CTRL, SPACE, Theme menu, exec, omarchy-menu theme
-bindd = SUPER, BACKSPACE, Toggle window transparency, exec, omarchy-hyprland-active-window-transparency-toggle
+bindd = SUPER, BACKSPACE, Toggle window transparency, exec, hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle
 bindd = SUPER SHIFT, BACKSPACE, Toggle window gaps, exec, omarchy-hyprland-window-gaps-toggle
 bindd = SUPER CTRL, BACKSPACE, Toggle single-window square aspect, exec, omarchy-hyprland-window-single-square-aspect-toggle
 
@@ -29,9 +27,6 @@ bindd = SUPER SHIFT ALT, COMMA, Restore last notification, exec, makoctl restore
 # Toggles
 bindd = SUPER CTRL, I, Toggle locking on idle, exec, omarchy-toggle-idle
 bindd = SUPER CTRL, N, Toggle nightlight, exec, omarchy-toggle-nightlight
-bindd = SUPER CTRL, Delete, Toggle laptop display, exec, omarchy-hyprland-monitor-internal toggle
-bindl = , switch:on:Lid Switch, exec, omarchy-hyprland-monitor-internal off
-bindl = , switch:off:Lid Switch, exec, omarchy-hyprland-monitor-internal on
 
 # Control Apple Display brightness
 bindd = CTRL, F1, Apple Display brightness down, exec, omarchy-brightness-display-apple -5000
@@ -47,8 +42,8 @@ bindd = SUPER, PRINT, Color picker, exec, pkill hyprpicker || hyprpicker -a
 bindd = SUPER CTRL, S, Share, exec, omarchy-menu share
 
 # Waybar-less information
-bindd = SUPER CTRL ALT, T, Show time, exec, notify-send -u low "    $(date +"%A %H:%M  ·  %d %B %Y  ·  Week %V")"
-bindd = SUPER CTRL ALT, B, Show battery remaining, exec, notify-send -u low "$(omarchy-battery-status)"
+bindd = SUPER CTRL ALT, T, Show time, exec, notify-send "    $(date +"%A %H:%M  —  %d %B W%V %Y")"
+bindd = SUPER CTRL ALT, B, Show battery remaining, exec, notify-send "$(omarchy-battery-status)"
 
 # Control panels
 bindd = SUPER CTRL, A, Audio controls, exec, omarchy-launch-audio

default/hypr/looknfeel.conf

@@ -91,7 +91,7 @@ animations {
 
     animation = global, 1, 10, default
     animation = border, 1, 5.39, easeOutQuint
-    animation = windows, 1, 3.79, easeOutQuint
+    animation = windows, 1, 4.79, easeOutQuint
     animation = windowsIn, 1, 4.1, easeOutQuint, popin 87%
     animation = windowsOut, 1, 1.49, linear, popin 87%
     animation = fadeIn, 1, 1.73, almostLinear
@@ -103,7 +103,7 @@ animations {
     animation = fadeLayersIn, 1, 1.79, almostLinear
     animation = fadeLayersOut, 1, 1.39, almostLinear
     animation = workspaces, 0, 0, ease
-    animation = specialWorkspace, 1, 3, easeOutQuint, slidevert
+    animation = specialWorkspace, 1, 4, easeOutQuint, slidevert
 }
 
 # See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
@@ -122,7 +122,6 @@ master {
 misc {
     disable_hyprland_logo = true
     disable_splash_rendering  = true
-    disable_scale_notification = true
     focus_on_activate = true
     anr_missed_pings = 3
     on_focus_under_fullscreen = 1

default/hypr/toggles/flags.conf

@@ -1,2 +0,0 @@
-# This directory is intended for permanent config toggle flags.
-# Do not remove this file (as the directory always needs at least one file).