Update migrations/1773976181.sh

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

bin/omarchy-battery-capacity

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+# Returns the battery full capacity in Wh (rounded to whole number).
+# Used by omarchy-battery-status for displaying battery capacity.
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+echo "$battery_info" | awk '/energy-full:/ {
+    printf "%d", $2
+    exit
+}'

bin/omarchy-battery-monitor

@@ -9,6 +9,7 @@ BATTERY_STATE=$(upower -i $(upower -e | grep 'BAT') | grep -E "state" | awk '{pr
 
 send_notification() {
   notify-send -u critical "󱐋 Time to recharge!" "Battery is down to ${1}%" -i battery-caution -t 30000
+  omarchy-hook battery-low "$1"
 }
 
 if [[ -n $BATTERY_LEVEL && $BATTERY_LEVEL =~ ^[0-9]+$ ]]; then

bin/omarchy-battery-remaining-time

@@ -0,0 +1,25 @@
+#!/bin/bash
+
+# Returns the battery time remaining (to empty or full) in a compact format.
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+echo "$battery_info" | awk '/time to (empty|full)/ {
+    value = $4
+    unit = $5
+    if (unit == "minutes") {
+        hours = int(value / 60)
+        minutes = int(value % 60)
+    } else {
+        hours = int(value)
+        minutes = int((value - hours) * 60)
+    }
+    if (hours > 0 && minutes > 0) {
+        printf "%dh %dm", hours, minutes
+    } else if (hours > 0) {
+        printf "%dh", hours
+    } else {
+        printf "%dm", minutes
+    }
+    exit
+}'

bin/omarchy-battery-status

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+# Returns a formatted battery status string with percentage and power draw/charge.
+# Used by the battery notification hotkey (Ctrl + Shift + Super + B).
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+percentage=$(echo "$battery_info" | awk '/percentage/ {
+    print int($2)
+    exit
+}')
+
+power_rate=$(echo "$battery_info" | awk '/energy-rate/ {
+    rounded = sprintf("%.1f", $2)
+    sub(/\.0$/, "", rounded)
+    print rounded
+    exit
+}')
+
+state=$(echo "$battery_info" | awk '/state/ { print $2; exit }')
+time_remaining=$(omarchy-battery-remaining-time)
+capacity=$(omarchy-battery-capacity)
+
+if [[ $state == "charging" ]]; then
+    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} to full  ·   ${power_rate}W / ${capacity}Wh"
+else
+    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} left  ·   ${power_rate}W / ${capacity}Wh"
+fi

bin/omarchy-cmd-screenrecord

@@ -63,7 +63,7 @@ start_webcam_overlay() {
   done
 
   ffplay -f v4l2 $video_size_arg -framerate 30 "$WEBCAM_DEVICE" \
-    -vf "scale=${target_width}:-1" \
+    -vf "crop=iw/2:ih,scale=${target_width}:-1" \
     -window_title "WebcamOverlay" \
     -noborder \
     -fflags nobuffer -flags low_delay \
@@ -135,7 +135,17 @@ stop_screenrecording() {
     notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
   else
     trim_first_frame
-    notify-send "Screen recording saved to $OUTPUT_DIR" -t 2000
+    local filename=$(cat "$RECORDING_FILE" 2>/dev/null)
+    local preview="${filename%.mp4}-preview.png"
+
+    # Generate a preview thumbnail from the first frame
+    ffmpeg -y -i "$filename" -ss 00:00:00.1 -vframes 1 -q:v 2 "$preview" -loglevel quiet 2>/dev/null
+
+    (
+      ACTION=$(notify-send "Screen recording saved" "Open with Super + Alt + , (or click this)" -t 10000 -i "${preview:-$filename}" -A "default=open")
+      [[ $ACTION == "default" ]] && mpv "$filename"
+      rm -f "$preview"
+    ) &
   fi
 
   rm -f "$RECORDING_FILE"

bin/omarchy-cmd-screenshot

@@ -65,27 +65,30 @@ get_rectangles() {
 
 # Select based on mode
 case "$MODE" in
-  region)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(slurp 2>/dev/null)
-    kill $PID 2>/dev/null
-    ;;
-  windows)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
-    kill $PID 2>/dev/null
-    ;;
-  fullscreen)
-    SELECTION=$(hyprctl monitors -j | jq -r "${JQ_MONITOR_GEO} .[] | select(.focused == true) | format_geo")
-    ;;
-  smart|*)
-    RECTS=$(get_rectangles)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
-    kill $PID 2>/dev/null
+region)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(slurp 2>/dev/null)
+  kill $PID 2>/dev/null
+  ;;
+windows)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
+  kill $PID 2>/dev/null
+  ;;
+fullscreen)
+  SELECTION=$(hyprctl monitors -j | jq -r "${JQ_MONITOR_GEO} .[] | select(.focused == true) | format_geo")
+  ;;
+smart | *)
+  RECTS=$(get_rectangles)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
+  kill $PID 2>/dev/null
 
   # If the selection area is L * W < 20, we'll assume you were trying to select whichever
   # window or output it was inside of to prevent accidental 2px snapshots

bin/omarchy-hibernation-setup

@@ -73,9 +73,10 @@ if [[ ! -f $RESUME_DROP_IN ]]; then
   echo "Adding resume kernel parameters"
   sudo swapon -p 0 "$SWAP_FILE" 2>/dev/null
   RESUME_DEVICE=$(findmnt -no SOURCE -T "$SWAP_FILE" | sed 's/\[.*\]//')
-  RESUME_OFFSET=$(btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
+  RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
   sudo mkdir -p /etc/limine-entry-tool.d
-  echo "KERNEL_CMDLINE[default]+=\"resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+  echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+  sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
 fi
 
 # Use ACPI alarm for RTC wakeup on s2idle systems (needed for suspend-then-hibernate)
@@ -84,7 +85,8 @@ if grep -q "\[s2idle\]" /sys/power/mem_sleep 2>/dev/null; then
   if [[ ! -f $LIMINE_DROP_IN ]]; then
     echo "Enabling ACPI RTC alarm for s2idle suspend"
     sudo mkdir -p /etc/limine-entry-tool.d
-    echo 'KERNEL_CMDLINE[default]+="rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
+    echo 'KERNEL_CMDLINE[default]+=" rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
+    sudo tee -a /etc/default/limine < "$LIMINE_DROP_IN" >/dev/null
   fi
 fi
 

bin/omarchy-hw-intel

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Detect whether the computer has an Intel CPU.
+
+[[ $(grep -m1 "vendor_id" /proc/cpuinfo 2>/dev/null | cut -d: -f2 | tr -d ' ') == "GenuineIntel" ]]

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -4,6 +4,9 @@
 MONITOR_INFO=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)')
 ACTIVE_MONITOR=$(echo "$MONITOR_INFO" | jq -r '.name')
 CURRENT_SCALE=$(echo "$MONITOR_INFO" | jq -r '.scale')
+WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
+HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
+REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
 
 # Cycle through scales: 1 → 1.6 → 2 → 3 → 1
 CURRENT_INT=$(awk -v s="$CURRENT_SCALE" 'BEGIN { printf "%.0f", s * 10 }')
@@ -16,6 +19,6 @@ case "$CURRENT_INT" in
 esac
 
 hyprctl keyword misc:disable_scale_notification true
-hyprctl keyword monitor "$ACTIVE_MONITOR,preferred,auto,$NEW_SCALE"
+hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
 hyprctl keyword misc:disable_scale_notification false
 notify-send "󰍹    Display scaling set to ${NEW_SCALE}x"

bin/omarchy-install-dev-env

@@ -50,9 +50,9 @@ case "$1" in
 ruby)
   echo -e "Installing Ruby on Rails...\n"
   omarchy-pkg-add libyaml
-  mise use --global ruby@latest
-  mise settings add idiomatic_version_file_enable_tools ruby
   mise settings add ruby.compile false
+  mise settings add idiomatic_version_file_enable_tools ruby
+  mise use --global ruby@latest
   echo "gem: --no-document" >~/.gemrc
   mise x ruby -- gem install rails --no-document
   echo -e "\nYou can now run: rails new myproject"

bin/omarchy-install-nordvpn

@@ -14,4 +14,4 @@ sudo usermod -aG nordvpn "$USER"
 echo -e "\nNordVPN installed! After reboot, run 'nordvpn login' to authenticate."
 
 echo
-gum confirm "Reboot now to make NordVPN usable?" && sudo reboot now
+gum confirm "Reboot now to make NordVPN usable?" && omarchy-system-reboot

bin/omarchy-menu

@@ -19,6 +19,13 @@ back_to() {
   fi
 }
 
+toggle_existing_menu() {
+  if pgrep -f "walker.*--dmenu" >/dev/null; then
+    walker --close >/dev/null 2>&1
+    exit 0
+  fi
+}
+
 menu() {
   local prompt="$1"
   local options="$2"
@@ -214,6 +221,7 @@ show_font_menu() {
 show_setup_menu() {
   local options="  Audio\n  Wifi\n󰂯  Bluetooth\n󱐋  Power Profile\n  System Sleep\n󰍹  Monitors"
   [[ -f ~/.config/hypr/bindings.conf ]] && options="$options\n  Keybindings"
+  options="$options\n  Key Remapping"
   [[ -f ~/.config/hypr/input.conf ]] && options="$options\n  Input"
   options="$options\n󰱔  DNS\n  Security\n  Config"
 
@@ -226,6 +234,7 @@ show_setup_menu() {
   *Monitors*) open_in_editor ~/.config/hypr/monitors.conf ;;
   *Keybindings*) open_in_editor ~/.config/hypr/bindings.conf ;;
   *Input*) open_in_editor ~/.config/hypr/input.conf ;;
+  *Key\ Remapping*) omarchy-setup-makima && open_in_editor "$HOME/.config/makima/AT Translated Set 2 keyboard.toml" && omarchy-restart-makima ;;
   *DNS*) present_terminal omarchy-setup-dns ;;
   *Security*) show_setup_security_menu ;;
   *Config*) show_setup_config_menu ;;
@@ -308,7 +317,7 @@ show_install_menu() {
 }
 
 show_install_service_menu() {
-  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN\n󰟵  Bitwarden\n  Chromium Account") in
+  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN [AUR]\n󰟵  Bitwarden\n  Chromium Account") in
   *Dropbox*) present_terminal omarchy-install-dropbox ;;
   *Tailscale*) present_terminal omarchy-install-tailscale ;;
   *NordVPN*) present_terminal omarchy-install-nordvpn ;;
@@ -346,14 +355,9 @@ show_install_ai_menu() {
       echo ollama
   )
 
-  case $(menu "Install" "  Dictation\n󱚤  Claude Code\n󱚤  Codex\n󱚤  Gemini CLI\n󱚤  Copilot CLI\n󱚤  Cursor CLI\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
+  case $(menu "Install" "  Dictation\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
   *Dictation*) present_terminal omarchy-voxtype-install ;;
-  *Claude*) install "Claude Code" "claude-code" ;;
-  *Codex*) install "Codex" "openai-codex" ;;
-  *Gemini*) install "Gemini CLI" "gemini-cli" ;;
-  *Copilot*) install "Copilot CLI" "github-copilot-cli" ;;
-  *Cursor*) install "Cursor CLI" "cursor-cli" ;;
-  *Studio*) install "LM Studio" "lmstudio" ;;
+  *Studio*) install "LM Studio" "lmstudio-bin" ;;
   *Ollama*) install "Ollama" $ollama_pkg ;;
   *Crush*) install "Crush" "crush-bin" ;;
   *) show_install_menu ;;
@@ -619,6 +623,8 @@ go_to_menu() {
 USER_EXTENSIONS="$HOME/.config/omarchy/extensions/menu.sh"
 [[ -f $USER_EXTENSIONS ]] && source "$USER_EXTENSIONS"
 
+toggle_existing_menu
+
 if [[ -n $1 ]]; then
   BACK_TO_EXIT=true
   go_to_menu "$1"

bin/omarchy-npx-install

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+# Install an npx wrapper for a given npm package.
+# Usage: omarchy-npx-install <package> [command-name]
+#
+# If command-name is omitted, it defaults to the package name.
+# Example: omarchy-npx-install opencode-ai opencode
+
+if [[ -z $1 ]]; then
+  echo "Usage: omarchy-npx-install <package> [command-name]"
+  exit 1
+fi
+
+package=$1
+command=${2:-$1}
+
+mkdir -p "$HOME/.local/bin"
+
+cat > "$HOME/.local/bin/$command" <<EOF
+#!/bin/bash
+exec npx --yes $package "\$@"
+EOF
+
+chmod +x "$HOME/.local/bin/$command"

bin/omarchy-pkg-aur-install

@@ -20,7 +20,8 @@ pkg_names=$(yay -Slqa | fzf "${fzf_args[@]}")
 
 if [[ -n $pkg_names ]]; then
   # Add aur/ prefix to each package name and convert to space-separated for yay
-  sudo -v
+  source omarchy-sudo-keepalive
+
   echo "$pkg_names" | sed 's/^/aur\//' | tr '\n' ' ' | xargs yay -S --noconfirm
   sudo updatedb
   omarchy-show-done

bin/omarchy-pkg-install

@@ -17,7 +17,9 @@ fzf_args=(
 pkg_names=$(pacman -Slq | fzf "${fzf_args[@]}")
 
 if [[ -n $pkg_names ]]; then
-  # Convert newline-separated selections to space-separated for yay
+  source omarchy-sudo-keepalive
+
+  # Convert newline-separated selections to space-separated for pacman
   echo "$pkg_names" | tr '\n' ' ' | xargs sudo pacman -S --noconfirm
   omarchy-show-done
 fi

bin/omarchy-reinstall-git

@@ -3,6 +3,6 @@ set -e
 
 # Reinstall the Omarchy configuration directory from the git source.
 
-git clone "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
+git clone --depth=1 "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
 mv $OMARCHY_PATH ~/.local/share/omarchy-old
 mv ~/.local/share/omarchy-new $OMARCHY_PATH

bin/omarchy-restart-makima

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Restart makima - key remapping service for remapping Copilot key to Omarchy Menu
+
+sudo systemctl restart makima

bin/omarchy-setup-makima

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Setup makima - key remapping service for remapping Copilot key to Omarchy Menu
+
+CONFIG_FILE="$HOME/.config/makima/AT Translated Set 2 keyboard.toml"
+
+if [[ ! -f $CONFIG_FILE ]]; then
+  omarchy-pkg-add makima-bin
+
+  mkdir -p "$HOME/.config/makima"
+  cp "$OMARCHY_PATH/default/makima/AT Translated Set 2 keyboard.toml" "$CONFIG_FILE"
+
+  sudo mkdir -p /etc/systemd/system/makima.service.d
+  sudo tee /etc/systemd/system/makima.service.d/override.conf >/dev/null <<EOF
+[Service]
+User=$USER
+Environment="MAKIMA_CONFIG=/home/$USER/.config/makima"
+EOF
+
+  sudo systemctl daemon-reload
+  sudo systemctl enable --now makima 2>/dev/null || true
+fi

bin/omarchy-sudo-keepalive

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# Prompt for sudo once and keep the credential alive in the background.
+# Source this script so the trap applies to the calling shell:
+#   source omarchy-sudo-keepalive
+
+sudo -v
+while true; do sudo -n true; sleep 60; done 2>/dev/null &
+SUDO_KEEPALIVE_PID=$!
+trap "kill $SUDO_KEEPALIVE_PID 2>/dev/null" EXIT

bin/omarchy-sudo-passwordless-toggle

@@ -0,0 +1,43 @@
+#!/bin/bash
+
+# Toggle passwordless sudo for the current user.
+# First run: enables passwordless sudo for 15 minutes (after confirmation).
+# Second run: disables it early.
+
+NOPASSWD_FILE="/etc/sudoers.d/99-omarchy-nopasswd-${USER}"
+TIMER_NAME="omarchy-nopasswd-expire-${USER}"
+
+# Safety: if the file exists but the timer doesn't (e.g. after reboot), clean up
+if sudo test -f "$NOPASSWD_FILE" && ! systemctl is-active "${TIMER_NAME}.timer" &>/dev/null; then
+  sudo rm "$NOPASSWD_FILE"
+fi
+
+# Check for the file directly — sudo -n can stay cached or be granted by other rules
+if sudo test -f "$NOPASSWD_FILE"; then
+  sudo rm "$NOPASSWD_FILE"
+  sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
+  echo "Passwordless sudo has been DISABLED. Sudo will require a password again."
+else
+  echo ""
+  echo "⚠️  WARNING: This will allow ANY process running as your user to"
+  echo "execute ANY command as root WITHOUT a password for 15 minutes."
+  echo ""
+  echo "This is useful for AI agents that need to run sudo commands,"
+  echo "but it significantly weakens the security of your system."
+  echo "Anyone or anything with access to your user account gets full root."
+  echo ""
+  echo "Passwordless sudo will automatically disable after 15 minutes."
+  echo "Run this command again to disable it early."
+  echo ""
+
+  if gum confirm "Enable passwordless sudo for 15 minutes? This is a significant security risk!"; then
+    echo "${USER} ALL=(ALL) NOPASSWD: ALL" | sudo tee "$NOPASSWD_FILE" > /dev/null
+    sudo chmod 440 "$NOPASSWD_FILE"
+    sudo systemd-run --on-active=15m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
+      rm "$NOPASSWD_FILE"
+    echo "Passwordless sudo has been ENABLED. It will automatically disable in 15 minutes."
+    echo "Note: if you restart before then, run omarchy-sudo-passwordless-toggle again to disable it."
+  else
+    echo "Aborted. No changes made."
+  fi
+fi

bin/omarchy-update

@@ -5,7 +5,7 @@ set -e
 trap 'echo ""; echo -e "\033[0;31mSomething went wrong during the update!\n\nPlease review the output above carefully, correct the error, and retry the update.\n\nIf you need assistance, get help from the community at https://omarchy.org/discord\033[0m"' ERR
 
 if [[ $1 == "-y" ]] || omarchy-update-confirm; then
-  omarchy-snapshot create || (( $? == 127 ))
+  omarchy-snapshot create || (($? == 127))
   omarchy-update-git
   omarchy-update-perform
 fi

bin/omarchy-update-git

@@ -4,5 +4,7 @@ set -e
 
 echo -e "\e[32mUpdate Omarchy\e[0m"
 
+omarchy-update-time
+
 git -C $OMARCHY_PATH pull --autostash
 git -C $OMARCHY_PATH --no-pager diff --check || git -C $OMARCHY_PATH reset --merge

bin/omarchy-update-perform

@@ -3,14 +3,13 @@
 set -e
 
 # Ensure screensaver/sleep doesn't set in during updates
-hyprctl dispatch tagwindow +noidle &> /dev/null || true
+hyprctl dispatch tagwindow +noidle &>/dev/null || true
 
 # Capture update logs (CLICOLOR_FORCE keeps gum styled when stdout is piped through tee)
 export CLICOLOR_FORCE=1
 exec > >(tee "/tmp/omarchy-update.log") 2>&1
 
 # Perform all update steps
-omarchy-update-time
 omarchy-update-keyring
 omarchy-update-available-reset
 omarchy-update-system-pkgs
@@ -24,4 +23,4 @@ omarchy-update-analyze-logs
 omarchy-update-restart
 
 # Re-enable screensaver/sleep after updates
-hyprctl dispatch tagwindow -- -noidle &> /dev/null || true
+hyprctl dispatch tagwindow -- -noidle &>/dev/null || true

config/alacritty/alacritty.toml

@@ -20,5 +20,6 @@ decorations = "None"
 [keyboard]
 bindings = [
 { key = "Insert", mods = "Shift", action = "Paste" },
-{ key = "Insert", mods = "Control", action = "Copy" }
+{ key = "Insert", mods = "Control", action = "Copy" },
+{ key = "Return", mods = "Shift", chars = "\u001B\r" }
 ]

config/hypr/bindings.conf

@@ -1,6 +1,7 @@
 # Application bindings
 bindd = SUPER, RETURN, Terminal, exec, uwsm-app -- xdg-terminal-exec --dir="$(omarchy-cmd-terminal-cwd)"
-bindd = SUPER ALT, RETURN, Tmux, exec, uwsm-app -- xdg-terminal-exec --dir="$(omarchy-cmd-terminal-cwd)" tmux new
+bindd = SUPER ALT, RETURN, Tmux, exec, uwsm-app -- xdg-terminal-exec --dir="$(omarchy-cmd-terminal-cwd)" bash -c "tmux attach || tmux new -s Work"
+bindd = SUPER SHIFT, RETURN, Browser, exec, omarchy-launch-browser
 bindd = SUPER SHIFT, F, File manager, exec, uwsm-app -- nautilus --new-window
 bindd = SUPER ALT SHIFT, F, File manager (cwd), exec, uwsm-app -- nautilus --new-window "$(omarchy-cmd-terminal-cwd)"
 bindd = SUPER SHIFT, B, Browser, exec, omarchy-launch-browser

config/hypr/input.conf

@@ -18,7 +18,7 @@ input {
 
   # Increase sensitivity for mouse/trackpad (default: 0)
   # sensitivity = 0.35
-  
+
   # Turn off mouse acceleration (default: false)
   # force_no_accel = true
 
@@ -47,3 +47,7 @@ windowrule = match:class com.mitchellh.ghostty, scroll_touchpad 0.2
 # Enable touchpad gestures for changing workspaces
 # See https://wiki.hyprland.org/Configuring/Gestures/
 # gesture = 3, horizontal, workspace
+
+# Enable touchpad gestures for moving focus (helpful on scrolling layout)
+# gesture = 3, left,  dispatcher, movefocus, l
+# gesture = 3, right, dispatcher, movefocus, r

config/hyprland-preview-share-picker/config.yaml

@@ -3,7 +3,7 @@
 # relative paths are resolved relative to the location of the config file
 stylesheets: ["../omarchy/current/theme/hyprland-preview-share-picker.css"]
 # default page selected when the picker is opened
-default_page: windows
+default_page: outputs
 
 window:
   # height of the application window

config/omarchy/hooks/battery-low.sample

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# This hook is called with the current battery percentage when the low battery
+# notification is sent. To put it into use, remove .sample from the name.
+
+SOUND_FILE="/usr/share/sounds/freedesktop/stereo/dialog-warning.oga"
+
+if omarchy-cmd-present mpv && [[ -f $SOUND_FILE ]]; then
+  mpv --no-video "$SOUND_FILE" >/dev/null 2>&1
+fi

config/tmux/tmux.conf

@@ -4,7 +4,7 @@ set -g prefix2 C-b
 bind C-Space send-prefix
 
 # Reload config
-bind q source-file ~/.config/tmux/tmux.conf
+bind q source-file ~/.config/tmux/tmux.conf \; display "Configuration reloaded"
 
 # Vi mode for copy
 setw -g mode-keys vi
@@ -43,6 +43,8 @@ bind -n M-9 select-window -t 9
 
 bind -n M-Left select-window -t -1
 bind -n M-Right select-window -t +1
+bind -n M-S-Left swap-window -t -1 \; select-window -t -1
+bind -n M-S-Right swap-window -t +1 \; select-window -t +1
 
 # Session controls
 bind R command-prompt -I "#S" "rename-session -- '%%'"
@@ -75,11 +77,13 @@ set -g status-interval 5
 set -g status-left-length 30
 set -g status-right-length 50
 set -g window-status-separator ""
+set -gw automatic-rename on
+set -gw automatic-rename-format '#{b:pane_current_path}'
 
 # Theme
 set -g status-style "bg=default,fg=default"
 set -g status-left "#[fg=black,bg=blue,bold] #S #[bg=default] "
-set -g status-right "#[fg=blue]#{?client_prefix,PREFIX ,}#[fg=brightblack]#h "
+set -g status-right "#[fg=blue]#{?pane_in_mode,COPY ,}#{?client_prefix,PREFIX ,}#{?window_zoomed_flag,ZOOM ,}#[fg=brightblack]#h "
 set -g window-status-format "#[fg=brightblack] #I:#W "
 set -g window-status-current-format "#[fg=blue,bold] #I:#W "
 set -g pane-border-style "fg=brightblack"

config/uwsm/env

@@ -2,10 +2,10 @@
 
 # Ensure Omarchy bins are in the path
 export OMARCHY_PATH=$HOME/.local/share/omarchy
-export PATH=$OMARCHY_PATH/bin:$PATH
+export PATH=$OMARCHY_PATH/bin:$PATH:$HOME/.local/bin
 
 # Set default terminal and editor
 source ~/.config/uwsm/default
 
 # Activate mise if present on the system
-omarchy-cmd-present mise && eval "$(mise activate bash)"
+omarchy-cmd-present mise && eval "$(mise activate bash --shims)"

default/bash/aliases

@@ -6,18 +6,29 @@ if command -v eza &> /dev/null; then
   alias lta='lt -a'
 fi
 
-alias ff="fzf --preview 'bat --style=numbers --color=always {}'"
+if [[ "$TERM" == "xterm-kitty" ]]; then
+  alias ff="fzf --preview 'case \$(file --mime-type -b {}) in image/*) kitty icat --clear --transfer-mode=memory --stdin=no --place=\${FZF_PREVIEW_COLUMNS}x\${FZF_PREVIEW_LINES}@0x0 {} ;; *) bat --style=numbers --color=always {} ;; esac'"
+else
+  alias ff="fzf --preview 'bat --style=numbers --color=always {}'"
+fi
 alias eff='$EDITOR "$(ff)"'
+sff() { if [ $# -eq 0 ]; then echo "Usage: sff <destination> (e.g. sff host:/tmp/)"; return 1; fi; local file; file=$(find . -type f -printf '%T@\t%p\n' | sort -rn | cut -f2- | ff) && [ -n "$file" ] && scp "$file" "$1"; }
 
 if command -v zoxide &> /dev/null; then
   alias cd="zd"
   zd() {
-    if [ $# -eq 0 ]; then
-      builtin cd ~ && return
-    elif [ -d "$1" ]; then
-      builtin cd "$1"
+    if (( $# == 0 )); then
+      builtin cd ~ || return
+    elif [[ -d $1 ]]; then
+      builtin cd "$1" || return
     else
-      z "$@" && printf "\U000F17A9 " && pwd || echo "Error: Directory not found"
+      if ! z "$@"; then
+        echo "Error: Directory not found"
+        return 1
+      fi
+
+      printf "\U000F17A9 "
+      pwd
     fi
   }
 fi

default/bash/fns/worktrees

@@ -0,0 +1,36 @@
+# Create a new worktree and branch from within current git directory.
+ga() {
+  if [[ -z "$1" ]]; then
+    echo "Usage: ga [branch name]"
+    return 1
+  fi
+
+  local branch="$1"
+  local base="$(basename "$PWD")"
+  local path="../${base}--${branch}"
+
+  git worktree add -b "$branch" "$path"
+  mise trust "$path"
+  cd "$path"
+}
+
+# Remove worktree and branch from within active worktree directory.
+gd() {
+  if gum confirm "Remove worktree and branch?"; then
+    local cwd base branch root worktree
+
+    cwd="$(pwd)"
+    worktree="$(basename "$cwd")"
+
+    # split on first `--`
+    root="${worktree%%--*}"
+    branch="${worktree#*--}"
+
+    # Protect against accidentally nuking a non-worktree directory
+    if [[ "$root" != "$worktree" ]]; then
+      cd "../$root"
+      git worktree remove "$cwd" --force || return 1
+      git branch -D "$branch"
+    fi
+  fi
+}

default/bash/init

@@ -11,7 +11,7 @@ if command -v zoxide &> /dev/null; then
 fi
 
 if command -v try &> /dev/null; then
-  eval "$(SHELL=/bin/bash try init ~/Work/tries)"
+  eval "$(SHELL=/bin/bash command try init ~/Work/tries)"
 fi
 
 if command -v fzf &> /dev/null; then

default/elephant/omarchy_themes.lua

@@ -3,6 +3,7 @@
 --
 Name = "omarchythemes"
 NamePretty = "Omarchy Themes"
+HideFromProviderlist = true
 
 -- Check if file exists using Lua (no subprocess)
 local function file_exists(path)
@@ -93,4 +94,3 @@ function GetEntries()
 
   return entries
 end
-

default/hypr/apps.conf

@@ -10,6 +10,7 @@ source = ~/.local/share/omarchy/default/hypr/apps/qemu.conf
 source = ~/.local/share/omarchy/default/hypr/apps/retroarch.conf
 source = ~/.local/share/omarchy/default/hypr/apps/steam.conf
 source = ~/.local/share/omarchy/default/hypr/apps/geforce.conf
+source = ~/.local/share/omarchy/default/hypr/apps/moonlight.conf
 source = ~/.local/share/omarchy/default/hypr/apps/system.conf
 source = ~/.local/share/omarchy/default/hypr/apps/telegram.conf
 source = ~/.local/share/omarchy/default/hypr/apps/terminals.conf

default/hypr/apps/jetbrains.conf

@@ -14,7 +14,7 @@ windowrule {
 windowrule {
     name = jetbrains-popup
     match:class = ^(jetbrains-.*)
-    match:title = ^()$
+    match:title = ^(| )$
     match:float = 1
     tag = +jetbrains
     center = on

default/hypr/apps/localsend.conf

@@ -1,3 +1,4 @@
 # Float LocalSend and fzf file picker
 windowrule = float on, match:class (Share|localsend)
 windowrule = center on, match:class (Share|localsend)
+windowrule = size 1100 700, match:class localsend

default/hypr/apps/moonlight.conf

@@ -0,0 +1,6 @@
+windowrule {
+  name = moonlight
+  match:class = com.moonlight_stream.Moonlight
+  fullscreen = 1
+  idle_inhibit = fullscreen
+}

default/hypr/bindings/utilities.conf

@@ -43,7 +43,7 @@ bindd = SUPER CTRL, S, Share, exec, omarchy-menu share
 
 # Waybar-less information
 bindd = SUPER CTRL ALT, T, Show time, exec, notify-send "    $(date +"%A %H:%M  —  %d %B W%V %Y")"
-bindd = SUPER CTRL ALT, B, Show battery remaining, exec, notify-send "󰁹    Battery is at $(omarchy-battery-remaining)%"
+bindd = SUPER CTRL ALT, B, Show battery remaining, exec, notify-send "$(omarchy-battery-status)"
 
 # Control panels
 bindd = SUPER CTRL, A, Audio controls, exec, omarchy-launch-audio

default/hypr/looknfeel.conf

@@ -103,6 +103,7 @@ animations {
     animation = fadeLayersIn, 1, 1.79, almostLinear
     animation = fadeLayersOut, 1, 1.39, almostLinear
     animation = workspaces, 0, 0, ease
+    animation = specialWorkspace, 1, 4, easeOutQuint, slidevert
 }
 
 # See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more

default/makima/AT Translated Set 2 keyboard.toml

@@ -0,0 +1,7 @@
+# Run omarchy-restart-makima after any changes
+
+[remap]
+KEY_LEFTMETA-KEY_LEFTSHIFT-KEY_F23 = ["KEY_LEFTMETA", "KEY_LEFTALT", "KEY_SPACE"]
+
+[settings]
+GRAB_DEVICE = "true"

default/systemd/system-sleep/unmount-fuse

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+# Lazy-unmount gvfsd-fuse filesystems before suspend/hibernate to prevent the
+# kernel's process freeze from timing out. FUSE daemons (like gvfsd-fuse from
+# Nautilus) can block in uninterruptible sleep during freeze, causing suspend
+# to silently fail. After wake, restart gvfs so the FUSE mount is restored.
+
+if [[ $1 == "pre" ]]; then
+  while IFS=' ' read -r _ mountpoint fstype _; do
+    if [[ $fstype == fuse.gvfsd-fuse ]]; then
+      mountpoint=$(printf '%b' "$mountpoint")
+      fusermount3 -uz "$mountpoint" 2>/dev/null || fusermount -uz "$mountpoint" 2>/dev/null || true
+    fi
+  done < /proc/mounts
+fi
+
+if [[ $1 == "post" ]]; then
+  # Run in background — user.slice is still frozen at this point, so a
+  # synchronous restart would block the thaw for up to 90 seconds.
+  (
+    sleep 5
+    for uid_dir in /run/user/*; do
+      uid=$(basename "$uid_dir")
+      if [[ -S $uid_dir/bus ]]; then
+        sudo -u "#$uid" env \
+          DBUS_SESSION_BUS_ADDRESS="unix:path=$uid_dir/bus" \
+          XDG_RUNTIME_DIR="$uid_dir" \
+          systemctl --user restart gvfs-daemon.service 2>/dev/null || true
+      fi
+    done
+  ) &
+  disown
+fi

install/config/all.sh

@@ -18,12 +18,14 @@ run_logged $OMARCHY_INSTALL/config/remove-fcitx5-autostart.sh
 run_logged $OMARCHY_INSTALL/config/localdb.sh
 run_logged $OMARCHY_INSTALL/config/walker-elephant.sh
 run_logged $OMARCHY_INSTALL/config/fast-shutdown.sh
+run_logged $OMARCHY_INSTALL/config/unmount-fuse.sh
 run_logged $OMARCHY_INSTALL/config/sudoless-asdcontrol.sh
 run_logged $OMARCHY_INSTALL/config/input-group.sh
 run_logged $OMARCHY_INSTALL/config/omarchy-ai-skill.sh
 run_logged $OMARCHY_INSTALL/config/kernel-modules-hook.sh
 run_logged $OMARCHY_INSTALL/config/powerprofilesctl-rules.sh
 run_logged $OMARCHY_INSTALL/config/wifi-powersave-rules.sh
+run_logged $OMARCHY_INSTALL/config/plocate-ac-only.sh
 run_logged $OMARCHY_INSTALL/config/hardware/network.sh
 run_logged $OMARCHY_INSTALL/config/hardware/set-wireless-regdom.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-fkeys.sh
@@ -32,7 +34,10 @@ run_logged $OMARCHY_INSTALL/config/hardware/printer.sh
 run_logged $OMARCHY_INSTALL/config/hardware/usb-autosuspend.sh
 run_logged $OMARCHY_INSTALL/config/hardware/ignore-power-button.sh
 run_logged $OMARCHY_INSTALL/config/hardware/nvidia.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel-thermald.sh
 run_logged $OMARCHY_INSTALL/config/hardware/vulkan.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-intel-panther-lake-display.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-f13-amd-audio-input.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-bcm43xx.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-spi-keyboard.sh
@@ -42,5 +47,8 @@ run_logged $OMARCHY_INSTALL/config/hardware/fix-surface-keyboard.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-asus-rog-audio-mixer.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-asus-rog-mic.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-yt6801-ethernet-adapter.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-dell-xps-audio.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-synaptic-touchpad.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-tuxedo-backlight.sh
 run_logged $OMARCHY_INSTALL/config/hardware/framework16-qmk-hid.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel-ipu7-camera.sh

install/config/hardware/fix-apple-t2.sh

@@ -30,6 +30,6 @@ EOF
   sudo mkdir -p /etc/limine-entry-tool.d
   cat <<EOF | sudo tee /etc/limine-entry-tool.d/t2-mac.conf >/dev/null
 # Generated by Omarchy installer for T2 Mac support
-KERNEL_CMDLINE[default]+="intel_iommu=on iommu=pt pcie_ports=compat"
+KERNEL_CMDLINE[default]+=" intel_iommu=on iommu=pt pcie_ports=compat"
 EOF
 fi

install/config/hardware/fix-dell-xps-audio.sh

@@ -0,0 +1,20 @@
+# Fix audio on Dell XPS 2026 (Panther Lake) by blacklisting SOF audio modules
+# that conflict with standard HDA drivers. This turns off audio, but allows boot.
+# This is meant to be removed as soon as its fixed upstream.
+
+if lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'; then
+  sudo tee /etc/modprobe.d/blacklist-audio.conf << 'EOF'
+blacklist snd_sof_pci_intel_ptl
+blacklist snd_sof_pci_intel_lnl
+blacklist snd_sof_pci_intel_mtl
+blacklist snd_sof_intel_hda_generic
+blacklist snd_sof_intel_hda_common
+blacklist snd_sof_intel_hda
+blacklist snd_sof_pci
+blacklist snd_sof
+blacklist soundwire_intel
+blacklist snd_soc_cs35l56_sdw
+blacklist snd_soc_cs35l56
+blacklist snd_soc_skl_hda_dsp
+EOF
+fi

install/config/hardware/fix-dell-xps-haptic-touchpad.sh

@@ -0,0 +1,32 @@
+# Fix Dell XPS haptic touchpad losing haptic feedback after suspend/resume.
+# The I2C controller's runtime power management aggressively suspends the touchpad,
+# and on resume the haptic engine sometimes fails to reinitialize.
+# This udev rule keeps the I2C controller always on to prevent that.
+# Applies to any Dell XPS with the Synaptics haptic touchpad (06CB:D01A).
+
+if cat /sys/class/dmi/id/product_name 2>/dev/null | grep -qi "XPS" \
+  && ls /sys/bus/i2c/devices/i2c-VEN_06CB:00 2>/dev/null; then
+
+  # Disable runtime PM for I2C controller so haptic state isn't lost
+  sudo tee /etc/udev/rules.d/99-dell-xps-haptic-touchpad.rules << 'EOF'
+ACTION=="add", SUBSYSTEM=="pci", KERNEL=="0000:00:19.0", ATTR{power/control}="on"
+ACTION=="add", SUBSYSTEM=="platform", KERNEL=="i2c_designware.0", ATTR{power/control}="on"
+EOF
+  sudo udevadm control --reload-rules
+
+  # Rebind the I2C HID touchpad on boot and resume to reinitialize haptic engine
+  sudo tee /etc/systemd/system/dell-xps-haptic-touchpad.service << 'SVC'
+[Unit]
+Description=Rebind Dell XPS haptic touchpad
+After=systemd-udev-settle.service
+
+[Service]
+Type=oneshot
+ExecStart=/bin/bash -c 'if [[ -d /sys/bus/i2c/devices/i2c-VEN_06CB:00 ]]; then echo "i2c-VEN_06CB:00" | tee /sys/bus/i2c/drivers/i2c_hid_acpi/unbind > /dev/null 2>&1; sleep 1; echo "i2c-VEN_06CB:00" | tee /sys/bus/i2c/drivers/i2c_hid_acpi/bind > /dev/null 2>&1; fi'
+
+[Install]
+WantedBy=multi-user.target suspend.target hibernate.target
+SVC
+  sudo systemctl daemon-reload
+  sudo systemctl enable dell-xps-haptic-touchpad.service
+fi

install/config/hardware/fix-intel-panther-lake-display.sh

@@ -0,0 +1,18 @@
+# Fix display issues on Intel Panther Lake (Xe3) GPUs by disabling power-saving
+# features that cause screen to run at 10hz (e.g. Dell XPS 2026).
+if lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'; then
+  echo "Detected Intel Panther Lake GPU, applying display fixes..."
+
+  PANTHER_LAKE_CMDLINE='KERNEL_CMDLINE[default]+=" xe.enable_psr=0 xe.enable_panel_replay=0 xe.enable_fbc=0 xe.enable_dc=0"'
+
+  sudo mkdir -p /etc/limine-entry-tool.d
+  cat <<EOF | sudo tee /etc/limine-entry-tool.d/intel-panther-lake-display.conf >/dev/null
+# Fix Panther Lake display issues by disabling Xe power-saving features
+$PANTHER_LAKE_CMDLINE
+EOF
+
+  # Also append to /etc/default/limine if it exists, since it overrides drop-in configs
+  if [ -f /etc/default/limine ] && ! grep -q 'xe.enable_psr' /etc/default/limine; then
+    echo "$PANTHER_LAKE_CMDLINE" | sudo tee -a /etc/default/limine >/dev/null
+  fi
+fi

install/config/hardware/fix-tuxedo-backlight.sh

@@ -0,0 +1,15 @@
+# Install Tuxedo drivers for keyboard backlighting on Tuxedo laptops and
+# compatible devices like the Slimbook Executive (Clevo/Tuxedo chassis).
+if cat /sys/class/dmi/id/sys_vendor 2>/dev/null | grep -qi "TUXEDO\|Slimbook"; then
+  omarchy-pkg-add linux-headers tuxedo-drivers-nocompatcheck-dkms
+
+  # Blacklist the legacy clevo_xsm_wmi module which conflicts with the tuxedo-drivers
+  # clevo_wmi module. When clevo_xsm_wmi loads first, it grabs the Clevo WMI GUIDs,
+  # preventing tuxedo-drivers from initializing the keyboard backlight properly.
+  echo "blacklist clevo_xsm_wmi" | sudo tee /etc/modprobe.d/blacklist-clevo-xsm-wmi.conf > /dev/null
+
+  # Remove any orphaned clevo_xsm_wmi module files not managed by a package
+  for f in /lib/modules/*/extra/clevo-xsm-wmi.ko; do
+    [ -f "$f" ] && sudo rm "$f"
+  done
+fi

install/config/hardware/intel-ipu7-camera.sh

@@ -0,0 +1,5 @@
+# Install MIPI camera support for Intel IPU7 hardware
+
+if grep -q "OVTI08F4" /sys/bus/acpi/devices/*/hid 2>/dev/null; then
+  omarchy-pkg-add intel-ipu7-camera
+fi

install/config/hardware/intel-thermald.sh

@@ -0,0 +1,11 @@
+# Enable thermald for Intel laptops (Sandy Bridge and newer)
+# Thermald is useful for Intel Sandy Bridge (2nd gen Core, model 42/45) and newer CPUs.
+
+if omarchy-hw-intel; then
+  # Check if Sandy Bridge or newer (model >= 42). Sandy Bridge: model 42 (mobile), 45 (desktop)
+  cpu_model=$(grep -m1 "^model\s*:" /proc/cpuinfo 2>/dev/null | cut -d: -f2 | tr -d ' ')
+  if ((cpu_model >= 42)) && omarchy-battery-present; then
+    omarchy-pkg-add thermald
+    sudo systemctl enable thermald
+  fi
+fi

install/config/hardware/intel.sh

@@ -1,8 +1,8 @@
 # This installs hardware video acceleration for Intel GPUs
 # Check if we have an Intel GPU at all
 if INTEL_GPU=$(lspci | grep -iE 'vga|3d|display' | grep -i 'intel'); then
-  # HD Graphics and newer uses intel-media-driver
-  if [[ ${INTEL_GPU,,} =~ "hd graphics"|"xe"|"iris" ]]; then
+  # HD Graphics / Iris / Xe / Arc use intel-media-driver
+  if [[ ${INTEL_GPU,,} =~ (hd\ graphics|uhd\ graphics|xe|iris|arc) ]]; then
     omarchy-pkg-add intel-media-driver
   elif [[ ${INTEL_GPU,,} =~ "gma" ]]; then
     # Older generations from 2008 to ~2014-2017 use libva-intel-driver

install/config/plocate-ac-only.sh

@@ -0,0 +1,3 @@
+sudo install -d /etc/systemd/system/plocate-updatedb.service.d
+printf '%s\n' '[Unit]' 'ConditionACPower=true' | sudo tee /etc/systemd/system/plocate-updatedb.service.d/ac-only.conf >/dev/null
+sudo systemctl daemon-reload

install/config/unmount-fuse.sh

@@ -0,0 +1,2 @@
+sudo mkdir -p /usr/lib/systemd/system-sleep
+sudo install -m 0755 -o root -g root "$OMARCHY_PATH/default/systemd/system-sleep/unmount-fuse" /usr/lib/systemd/system-sleep/

install/login/limine-snapper.sh

@@ -32,6 +32,11 @@ EOF
   sudo cp $OMARCHY_PATH/default/limine/default.conf /etc/default/limine
   sudo sed -i "s|@@CMDLINE@@|$CMDLINE|g" /etc/default/limine
 
+  # Append any drop-in kernel cmdline configs (from hardware fix scripts, etc.)
+  for dropin in /etc/limine-entry-tool.d/*.conf; do
+    [ -f "$dropin" ] && cat "$dropin" | sudo tee -a /etc/default/limine >/dev/null
+  done
+
   # UKI and EFI fallback are EFI only
   if [[ -z $EFI ]]; then
     sudo sed -i '/^ENABLE_UKI=/d; /^ENABLE_LIMINE_FALLBACK=/d' /etc/default/limine
@@ -56,15 +61,15 @@ EOF
     fi
   fi
 
-  # Enable quota to allow space-aware algorithms to work
-  sudo btrfs quota enable /
+  # Disable btrfs quotas (they cause performance issues)
+  sudo btrfs quota disable / 2>/dev/null || true
 
-  # Tweak default Snapper configs
+  # Tweak default Snapper configs (number-based pruning only, space-aware limits need quotas)
   sudo sed -i 's/^TIMELINE_CREATE="yes"/TIMELINE_CREATE="no"/' /etc/snapper/configs/{root,home}
   sudo sed -i 's/^NUMBER_LIMIT="50"/NUMBER_LIMIT="5"/' /etc/snapper/configs/{root,home}
   sudo sed -i 's/^NUMBER_LIMIT_IMPORTANT="10"/NUMBER_LIMIT_IMPORTANT="5"/' /etc/snapper/configs/{root,home}
-  sudo sed -i 's/^SPACE_LIMIT="0.5"/SPACE_LIMIT="0.3"/' /etc/snapper/configs/{root,home}
-  sudo sed -i 's/^FREE_LIMIT="0.2"/FREE_LIMIT="0.3"/' /etc/snapper/configs/{root,home}
+  sudo sed -i 's/^SPACE_LIMIT="0.5"/SPACE_LIMIT="0"/' /etc/snapper/configs/{root,home}
+  sudo sed -i 's/^FREE_LIMIT="0.2"/FREE_LIMIT="0"/' /etc/snapper/configs/{root,home}
 
   chrootable_systemctl_enable limine-snapper-sync.service
 fi

install/omarchy-base.packages

@@ -16,7 +16,6 @@ brightnessctl
 btop
 chromium
 clang
-claude-code
 cups
 cups-browsed
 cups-filters
@@ -92,7 +91,6 @@ obs-studio
 obsidian
 omarchy-nvim
 omarchy-walker
-opencode
 pamixer
 pinta
 playerctl

install/omarchy-other.packages

@@ -19,6 +19,8 @@ iwd
 jdk-openjdk
 libpulse
 libsass
+intel-ipu7-camera
+intel-media-driver
 libva-intel-driver
 libva-nvidia-driver
 limine
@@ -42,9 +44,11 @@ pipewire-pulse
 qt6-wayland
 sassc
 snapper
+thermald
 webp-pixbuf-loader
 wget
 yay-debug
+tuxedo-drivers-nocompatcheck-dkms
 yt6801-dkms
 zram-generator
 

install/packaging/all.sh

@@ -4,6 +4,7 @@ run_logged $OMARCHY_INSTALL/packaging/nvim.sh
 run_logged $OMARCHY_INSTALL/packaging/icons.sh
 run_logged $OMARCHY_INSTALL/packaging/webapps.sh
 run_logged $OMARCHY_INSTALL/packaging/tuis.sh
+run_logged $OMARCHY_INSTALL/packaging/npx.sh
 run_logged $OMARCHY_INSTALL/packaging/asus-rog.sh
 run_logged $OMARCHY_INSTALL/packaging/framework16.sh
 run_logged $OMARCHY_INSTALL/packaging/surface.sh

install/packaging/npx.sh

@@ -0,0 +1,6 @@
+omarchy-npx-install @anthropic-ai/claude-code claude
+omarchy-npx-install @openai/codex codex
+omarchy-npx-install @google/gemini-cli gemini
+omarchy-npx-install @github/copilot copilot
+omarchy-npx-install opencode-ai opencode
+omarchy-npx-install playwright playwright-cli

migrations/1762156000.sh

@@ -1,3 +1,3 @@
 echo "Drop wayfreeze as hyprpicker replaces its function"
 
-omarchy-pkg-drop wayfreeze
+omarchy-pkg-drop wayfreeze-git wayfreeze

migrations/1772379119.sh

@@ -0,0 +1,13 @@
+echo "Add Alt+Shift+Arrow keybindings for swapping tmux windows"
+
+TMUX_CONF=~/.config/tmux/tmux.conf
+
+if [[ -f $TMUX_CONF ]]; then
+  if ! grep -q "bind -n M-S-Left swap-window" "$TMUX_CONF"; then
+    sed -i '/bind -n M-Right select-window -t +1/a\
+bind -n M-S-Left swap-window -t -1 \\; select-window -t -1\
+bind -n M-S-Right swap-window -t +1 \\; select-window -t +1' "$TMUX_CONF"
+  fi
+
+  omarchy-restart-tmux
+fi

migrations/1772389838.sh

@@ -0,0 +1,67 @@
+echo "Fix nvim transparency to preserve highlight foreground colors"
+
+TRANSPARENCY_FILE="$HOME/.config/nvim/plugin/after/transparency.lua"
+
+if [[ -f "$TRANSPARENCY_FILE" ]]; then
+  cat > "$TRANSPARENCY_FILE" << 'EOF'
+-- Make highlight groups transparent while preserving their other attributes
+local function make_transparent(name)
+	local ok, hl = pcall(vim.api.nvim_get_hl, 0, { name = name, link = false })
+	if ok then
+		hl.bg = nil
+		vim.api.nvim_set_hl(0, name, hl)
+	end
+end
+
+local groups = {
+	-- transparent background
+	"Normal",
+	"NormalFloat",
+	"FloatBorder",
+	"Pmenu",
+	"Terminal",
+	"EndOfBuffer",
+	"FoldColumn",
+	"Folded",
+	"SignColumn",
+	"LineNr",
+	"CursorLineNr",
+	"NormalNC",
+	"WhichKeyFloat",
+	"TelescopeBorder",
+	"TelescopeNormal",
+	"TelescopePromptBorder",
+	"TelescopePromptTitle",
+	-- neotree
+	"NeoTreeNormal",
+	"NeoTreeNormalNC",
+	"NeoTreeVertSplit",
+	"NeoTreeWinSeparator",
+	"NeoTreeEndOfBuffer",
+	-- nvim-tree
+	"NvimTreeNormal",
+	"NvimTreeVertSplit",
+	"NvimTreeEndOfBuffer",
+	-- notify
+	"NotifyINFOBody",
+	"NotifyERRORBody",
+	"NotifyWARNBody",
+	"NotifyTRACEBody",
+	"NotifyDEBUGBody",
+	"NotifyINFOTitle",
+	"NotifyERRORTitle",
+	"NotifyWARNTitle",
+	"NotifyTRACETitle",
+	"NotifyDEBUGTitle",
+	"NotifyINFOBorder",
+	"NotifyERRORBorder",
+	"NotifyWARNBorder",
+	"NotifyTRACEBorder",
+	"NotifyDEBUGBorder",
+}
+
+for _, name in ipairs(groups) do
+	make_transparent(name)
+end
+EOF
+fi

migrations/1772632144.sh

@@ -0,0 +1,7 @@
+echo "Use mise shims in ~/.config/uwsm/env"
+
+UWSM_ENV="$HOME/.config/uwsm/env"
+
+if [[ -f $UWSM_ENV ]] && grep -q 'mise activate bash)' "$UWSM_ENV"; then
+  sed -i 's/mise activate bash)/mise activate bash --shims)/g' "$UWSM_ENV"
+fi

migrations/1772907198.sh

@@ -0,0 +1,11 @@
+echo "Add automatic-rename settings to tmux configuration"
+
+if [[ -f ~/.config/tmux/tmux.conf ]]; then
+  if ! grep -q "set -gw automatic-rename on" ~/.config/tmux/tmux.conf; then
+    sed -i '/set -g window-status-separator ""/a\
+set -gw automatic-rename on\
+set -gw automatic-rename-format '\''#{b:pane_current_path}'\''\
+' ~/.config/tmux/tmux.conf
+    omarchy-restart-tmux
+  fi
+fi

migrations/1772964511.sh

@@ -0,0 +1,3 @@
+echo "Only run plocate indexing on AC power to prevent hangs after sleep"
+
+source $OMARCHY_PATH/install/config/plocate-ac-only.sh

migrations/1772981555.sh

@@ -0,0 +1,7 @@
+echo "Update hyprland-preview-share-picker config to default to outputs page"
+
+CONFIG_FILE=~/.config/hyprland-preview-share-picker/config.yaml
+
+if [[ -f $CONFIG_FILE ]]; then
+  sed -i 's/^default_page: windows$/default_page: outputs/' "$CONFIG_FILE"
+fi

migrations/1772981757.sh

@@ -0,0 +1,5 @@
+echo "Install Intel GPU hardware acceleration drivers if missing"
+
+if lspci | grep -iE 'vga|3d|display' | grep -qi 'intel'; then
+  source "$OMARCHY_PATH/install/config/hardware/intel.sh"
+fi

migrations/1772988614.sh

@@ -0,0 +1,7 @@
+echo "Add Shift+Return keyboard binding for multi-line as used by Claude Code to Alacritty"
+
+ALACRITTY_CONFIG=~/.config/alacritty/alacritty.toml
+
+if [[ -f $ALACRITTY_CONFIG ]] && ! grep -q 'key = "Return"' "$ALACRITTY_CONFIG"; then
+  sed -i 's/{ key = "Insert", mods = "Control", action = "Copy" }/{ key = "Insert", mods = "Control", action = "Copy" },\n  { key = "Return", mods = "Shift", chars = "\\u001B\\r" }/' "$ALACRITTY_CONFIG"
+fi

migrations/1772990935.sh

@@ -0,0 +1,7 @@
+echo "Add sample low battery notification hook"
+
+mkdir -p ~/.config/omarchy/hooks
+
+if [[ ! -f ~/.config/omarchy/hooks/battery-low.sample ]]; then
+  cp "$OMARCHY_PATH/config/omarchy/hooks/battery-low.sample" ~/.config/omarchy/hooks/battery-low.sample
+fi

migrations/1773012889.sh

@@ -0,0 +1,4 @@
+echo "Install system-sleep hook to unmount gvfsd-fuse before suspend/hibernate"
+
+sudo mkdir -p /usr/lib/systemd/system-sleep
+sudo install -m 0755 -o root -g root "$OMARCHY_PATH/default/systemd/system-sleep/unmount-fuse" /usr/lib/systemd/system-sleep/

migrations/1773505447.sh

@@ -0,0 +1,3 @@
+echo "Enable thermald for Intel Sandy Bridge and newer laptops"
+
+source "$OMARCHY_PATH/install/config/hardware/intel-thermald.sh"

migrations/1773598247.sh

@@ -0,0 +1,3 @@
+echo "Install npx wrappers for AI CLI tools and playwright"
+
+source "$OMARCHY_PATH/install/packaging/npx.sh"

migrations/1773599943.sh

@@ -0,0 +1,8 @@
+echo "Add COPY mode indicator to tmux status bar"
+
+if [[ -f ~/.config/tmux/tmux.conf ]]; then
+  if ! grep -q "pane_in_mode" ~/.config/tmux/tmux.conf; then
+    sed -i 's/#{?client_prefix/#{?pane_in_mode,COPY ,}#{?client_prefix/' ~/.config/tmux/tmux.conf
+    omarchy-restart-tmux
+  fi
+fi

migrations/1773976181.sh

@@ -0,0 +1,12 @@
+echo "Disable btrfs quotas and space-aware snapper limits on existing installs"
+
+if omarchy-cmd-present btrfs; then
+  if sudo btrfs quota status / 2>/dev/null | grep -q "Quota enabled: yes"; then
+    sudo btrfs quota disable /
+  fi
+fi
+
+if omarchy-cmd-present snapper; then
+  sudo sed -i 's/^SPACE_LIMIT="0\.3"/SPACE_LIMIT="0"/' /etc/snapper/configs/{root,home} 2>/dev/null
+  sudo sed -i 's/^FREE_LIMIT="0\.3"/FREE_LIMIT="0"/' /etc/snapper/configs/{root,home} 2>/dev/null
+fi

themes/lumon/btop.theme

@@ -0,0 +1,64 @@
+# Main background, empty for terminal default, need to be empty if you want transparent background
+theme[main_bg]=""
+theme_background=false
+
+# Main text color
+theme[main_fg]="#c7d2de"
+
+# Title color for boxes
+theme[title]="#9fcfe9"
+
+# Highlight color for keyboard shortcuts
+theme[hi_fg]="#b5deef"
+
+# Background color of selected item in processes box
+theme[selected_bg]="#355066"
+
+# Foreground color of selected item in processes box
+theme[selected_fg]="#c7d2de"
+
+# Color of inactive/disabled text
+theme[inactive_fg]="#355066"
+
+# Misc colors for processes box including mini cpu graphs, details memory graph and details status text
+theme[proc_misc]="#9fcfe9"
+
+# Box outline and divider line color
+theme[cpu_box]="#79abd2"
+theme[mem_box]="#79abd2"
+theme[net_box]="#79abd2"
+theme[proc_box]="#79abd2"
+theme[div_line]="#355066"
+
+# Gradient for all meters and graphs
+theme[temp_start]="#b5deef"
+theme[temp_mid]="#92c7e7"
+theme[temp_end]="#79abd2"
+
+theme[cpu_start]="#b5deef"
+theme[cpu_mid]="#92c7e7"
+theme[cpu_end]="#79abd2"
+
+theme[free_start]="#92c7e7"
+theme[free_mid]="#86b6da"
+theme[free_end]="#86b6da"
+
+theme[cached_start]="#86b6da"
+theme[cached_mid]="#86b6da"
+theme[cached_end]="#86b6da"
+
+theme[available_start]="#b5deef"
+theme[available_mid]="#b5deef"
+theme[available_end]="#b5deef"
+
+theme[used_start]="#79abd2"
+theme[used_mid]="#79abd2"
+theme[used_end]="#79abd2"
+
+theme[download_start]="#86b6da"
+theme[download_mid]="#b5deef"
+theme[download_end]="#92c7e7"
+
+theme[upload_start]="#86b6da"
+theme[upload_mid]="#b5deef"
+theme[upload_end]="#92c7e7"

themes/lumon/chromium.theme

@@ -0,0 +1 @@
+14,31,41

themes/lumon/colors.toml

@@ -0,0 +1,35 @@
+# Accent and UI colors
+accent = "#f2fcff"
+active_border_color = "#f2fcff"
+active_tab_background = "#6fb8e3"
+
+# Cursor colors
+cursor = "#f2fcff"
+
+# Primary colors
+foreground = "#d6e2ee"
+background = "#16242d"
+
+# Selection colors
+selection_foreground = "#1b2d40"
+selection_background = "#4d9ed3"
+
+# Normal colors (ANSI 0-7)
+color0  = "#1b2d40"
+color1  = "#4d86b0"
+color2  = "#5e95bc"
+color3  = "#6fa4c9"
+color4  = "#6fb8e3"
+color5  = "#8bc9eb"
+color6  = "#b4e4f6"
+color7  = "#d6e2ee"
+
+# Bright colors (ANSI 8-15)
+color8  = "#304860"
+color9  = "#73a6cb"
+color10 = "#86b7d8"
+color11 = "#9dcae5"
+color12 = "#f2fcff"
+color13 = "#b1d8ee"
+color14 = "#d1eef8"
+color15 = "#ffffff"

themes/lumon/hyprland.conf

@@ -0,0 +1,26 @@
+$activeBorderColor = rgb(f2fcff)
+$activeShadowColor = rgb(6fb8e3)
+$inactiveBorderColor = rgba(30486099)
+$inactiveShadowColor = rgba(30486077)
+
+general {
+    col.active_border = $activeBorderColor
+    col.inactive_border = $inactiveBorderColor
+    gaps_in = 8
+    gaps_out = 16
+}
+
+group {
+    col.border_active = $activeBorderColor
+    col.border_inactive = $inactiveBorderColor
+}
+
+decoration {
+    shadow {
+      enabled = true
+      range = 16
+      render_power = 4
+      color = $activeShadowColor
+      color_inactive = $inactiveShadowColor
+    }
+}

themes/lumon/icons.theme

@@ -0,0 +1 @@
+Yaru-blue

themes/lumon/neovim.lua

@@ -0,0 +1,13 @@
+return {
+  {
+    "omacom-io/lumon.nvim",
+    name = "lumon",
+    priority = 1000,
+  },
+  {
+    "LazyVim/LazyVim",
+    opts = {
+      colorscheme = "lumon",
+    },
+  },
+}

themes/lumon/swayosd.css

@@ -0,0 +1,44 @@
+@define-color background-color #1b2d40;
+@define-color border-color #304860;
+@define-color label #d6e2ee;
+@define-color image #d6e2ee;
+@define-color progress #6fb8e3;
+@define-color edge-light #f2fcff;
+
+/* Cancel out Omarchy defaults */
+window:not(:backdrop),
+window:backdrop {
+    border: none;
+    border-width: 0;
+    background-color: transparent;
+    box-shadow: none;
+    padding: 12px;
+}
+
+/* Draw the Lumon OSD shell */
+window:not(:backdrop) #container,
+window:backdrop #container {
+    border: 2px solid alpha(@border-color, 0.92);
+    background-color: alpha(@background-color, 0.95);
+    padding: 12px 16px;
+    background-clip: padding-box;
+}
+
+image,
+label {
+    color: @label;
+}
+
+progressbar {
+    min-height: 8px;
+}
+
+progressbar trough {
+    background: alpha(@border-color, 0.24);
+    box-shadow: inset 0 1px rgba(242, 252, 255, 0.03);
+}
+
+progressbar progress {
+    background: linear-gradient(90deg, @progress, @edge-light);
+    box-shadow: 0 0 10px rgba(111, 184, 227, 0.18);
+}

themes/lumon/waybar.css

@@ -0,0 +1,2 @@
+@define-color foreground #d6e2ee;
+@define-color background #213442;

themes/white/vscode.json

@@ -1,4 +1,4 @@
 {
-  "name": "White Omarchy",
+  "name": "White",
   "extension": "Bjarne.white-theme"
 }

version

@@ -1 +1 @@
-3.4.1
+3.4.2