Workspace saving

AI vibe experiment

AGENTS.md

@@ -12,6 +12,7 @@
 All commands start with `omarchy-`. Prefixes indicate purpose:
 
 - `cmd-` - check if commands exist, misc utility commands
+- `capture-` - screenshots, screen recordings, and other capture tools
 - `pkg-` - package management helpers
 - `hw-` - hardware detection (return exit codes for use in conditionals)
 - `refresh-` - copy default config to user's `~/.config/`

applications/hidden/lstopo.desktop

@@ -0,0 +1,2 @@
+[Desktop Entry]
+Hidden=true

bin/omarchy-ac-present

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# omarchy:summary=Returns true if AC power is connected.
+
+for ac in /sys/class/power_supply/AC* /sys/class/power_supply/ADP*; do
+  [[ -r $ac/online && $(cat "$ac/online") == "1" ]] && exit 0
+done
+
+exit 1

bin/omarchy-audio-input-mute

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+# omarchy:summary=Toggle microphone mute. Drives the hardware mic-mute LED on laptops that expose one.
+
+wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
+
+if pactl get-source-mute @DEFAULT_SOURCE@ | rg -q 'yes'; then
+  led=on
+  osd_message='Microphone muted'
+  osd_icon='microphone-sensitivity-muted-symbolic'
+else
+  led=off
+  osd_message='Microphone on'
+  osd_icon='audio-input-microphone-symbolic'
+fi
+
+omarchy-brightness-keyboard-mute "$led"
+
+omarchy-swayosd-client \
+  --custom-message "$osd_message" \
+  --custom-icon "$osd_icon"

bin/omarchy-audio-output-switch

@@ -1,16 +1,12 @@
 #!/bin/bash
 
-# Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.
-
-focused_monitor="$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"
+# omarchy:summary=Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.
 
 sinks=$(pactl -f json list sinks | jq '[.[] | select((.ports | length == 0) or ([.ports[]? | .availability != "not available"] | any))]')
 sinks_count=$(echo "$sinks" | jq '. | length')
 
 if (( sinks_count == 0 )); then
-  swayosd-client \
-    --monitor "$focused_monitor" \
-    --custom-message "No audio devices found"
+  omarchy-swayosd-client --custom-message "No audio devices found"
   exit 1
 fi
 
@@ -57,10 +53,10 @@ fi
 next_sink_volume_icon="sink-volume-${icon_state}-symbolic"
 
 if [[ $next_sink_name != $current_sink_name ]]; then
-  pactl set-default-sink "$next_sink_name"
+  next_sink_wpid=$(echo "$next_sink" | jq -r '.properties."object.id"')
+  wpctl set-default "$next_sink_wpid"
 fi
 
-swayosd-client \
-  --monitor "$focused_monitor" \
+omarchy-swayosd-client \
   --custom-message "$next_sink_description" \
   --custom-icon "$next_sink_volume_icon"

bin/omarchy-battery-capacity

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# omarchy:summary=Returns the battery full capacity in Wh (rounded to whole number).
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+echo "$battery_info" | awk '/energy-full:/ {
+    printf "%d", $2
+    exit
+}'

bin/omarchy-battery-monitor

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Designed to be run by systemd timer every 30 seconds and alerts if battery is low
+# omarchy:summary=Designed to be run by systemd timer every 30 seconds and alerts if battery is low
 
 BATTERY_THRESHOLD=10
 NOTIFICATION_FLAG="/run/user/$UID/omarchy_battery_notified"
@@ -9,6 +9,7 @@ BATTERY_STATE=$(upower -i $(upower -e | grep 'BAT') | grep -E "state" | awk '{pr
 
 send_notification() {
   notify-send -u critical "󱐋 Time to recharge!" "Battery is down to ${1}%" -i battery-caution -t 30000
+  omarchy-hook battery-low "$1"
 }
 
 if [[ -n $BATTERY_LEVEL && $BATTERY_LEVEL =~ ^[0-9]+$ ]]; then

bin/omarchy-battery-present

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# Returns true if a battery is present on the system.
-# Used by the battery monitor and other battery-related checks.
+# omarchy:summary=Returns true if a battery is present on the system.
 
 for bat in /sys/class/power_supply/BAT*; do
   [[ -r $bat/present ]] &&

bin/omarchy-battery-remaining

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# Returns the battery percentage remaining as an integer.
-# Used by the battery monitor and the Ctrl + Shift + Super + B hotkey.
+# omarchy:summary=Returns the battery percentage remaining as an integer.
 
 upower -i $(upower -e | grep BAT) | awk '/percentage/ { 
     print int($2)

bin/omarchy-battery-remaining-time

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# omarchy:summary=Returns the battery time remaining (to empty or full) in a compact format.
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+echo "$battery_info" | awk '/time to (empty|full)/ {
+    value = $4
+    unit = $5
+    if (unit ~ /^minute/) {
+        printf "%dm", int(value)
+    } else {
+        hours = int(value)
+        minutes = int((value - hours) * 60)
+        if (minutes > 0) {
+            printf "%dh %dm", hours, minutes
+        } else {
+            printf "%dh", hours
+        }
+    }
+    exit
+}'

bin/omarchy-battery-status

@@ -0,0 +1,27 @@
+#!/bin/bash
+
+# omarchy:summary=Returns a formatted battery status string with percentage and power draw/charge.
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+percentage=$(echo "$battery_info" | awk '/percentage/ {
+    print int($2)
+    exit
+}')
+
+power_rate=$(echo "$battery_info" | awk '/energy-rate/ {
+    rounded = sprintf("%.1f", $2)
+    sub(/\.0$/, "", rounded)
+    print rounded
+    exit
+}')
+
+state=$(echo "$battery_info" | awk '/state/ { print $2; exit }')
+time_remaining=$(omarchy-battery-remaining-time)
+capacity=$(omarchy-battery-capacity)
+
+if [[ $state == "charging" ]]; then
+    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} to full  ·   ${power_rate}W / ${capacity}Wh"
+else
+    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} left  ·   ${power_rate}W / ${capacity}Wh"
+fi

bin/omarchy-branch-set

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# Set the branch for Omarchy's git repository.
+# omarchy:summary=Set the branch for Omarchy's git repository.
+# omarchy:args=<master|rc|dev>
 
 if (($# == 0)); then
   echo "Usage: omarchy-branch-set [master|rc|dev]"

bin/omarchy-brightness-display

@@ -1,10 +1,15 @@
 #!/bin/bash
 
-# Adjust brightness on the most likely display device.
-# Usage: omarchy-brightness-display <step>
+# omarchy:summary=Adjust brightness on the most likely display device.
+# omarchy:args=<step>
 
 step="${1:-+5%}"
 
+if omarchy-hyprland-monitor-focused-apple; then
+  omarchy-brightness-display-apple "$step"
+  exit
+fi
+
 # Start with the first possible output, then refine to the most likely given an order heuristic.
 device="$(ls -1 /sys/class/backlight 2>/dev/null | head -n1)"
 for candidate in amdgpu_bl* intel_backlight acpi_video*; do
@@ -14,6 +19,31 @@ for candidate in amdgpu_bl* intel_backlight acpi_video*; do
   fi
 done
 
+# Current brightness percentage
+current=$(brightnessctl -d "$device" -m | cut -d',' -f4 | tr -d '%')
+
+# Apply non-uniform step size: 1% steps if at or below 5%, otherwise set an
+# absolute target percentage to avoid raw backlight rounding causing uneven OSD steps.
+if [[ $step == "+5%" ]]; then
+  if (( current < 5 )); then
+    (( target = current + 1 ))
+  else
+    (( target = current + 5 ))
+  fi
+
+  (( target > 100 )) && target=100
+  step="$target%"
+elif [[ $step == "5%-" ]]; then
+  if (( current <= 5 )); then
+    (( target = current - 1 ))
+  else
+    (( target = current - 5 ))
+  fi
+
+  (( target < 1 )) && target=1
+  step="$target%"
+fi
+
 # Set the actual brightness of the display device.
 brightnessctl -d "$device" set "$step" >/dev/null
 

bin/omarchy-brightness-display-apple

@@ -1,12 +1,32 @@
 #!/bin/bash
 
-# Adjust the brightness on Apple Studio Displays and Apple XDR Displays using asdcontrol.
+# omarchy:summary=Adjust the brightness on Apple Studio Displays and Apple XDR Displays using asdcontrol.
 
 if (( $# == 0 )); then
-  echo "Adjust Apple Display Brightness by passing +5000 or -5000 (or any range from 0-60000)"
+  echo "Adjust Apple Display brightness by passing +5%, 5%-, or 100%"
 else
-  device="$(sudo asdcontrol --detect /dev/usb/hiddev* | grep ^/dev/usb/hiddev | cut -d: -f1)"
-  sudo asdcontrol "$device" -- "$1" >/dev/null
+  step="$1"
+  if [[ $step =~ ^([0-9]+)%-$ ]]; then
+    step="-${BASH_REMATCH[1]}%"
+  fi
+
+  devices=()
+  for path in /dev/usb/hiddev* /dev/hiddev*; do
+    [[ -e $path ]] && devices+=("$path")
+  done
+
+  if (( ${#devices[@]} == 0 )); then
+    echo "No Apple Display HID device found"
+    exit 1
+  fi
+
+  device="$(sudo asdcontrol --detect "${devices[@]}" | grep -E '^/dev/(usb/)?hiddev' | cut -d: -f1 | head -n1)"
+  if [[ -z $device ]]; then
+    echo "No Apple Display HID device found"
+    exit 1
+  fi
+
+  sudo asdcontrol "$device" -- "$step" >/dev/null
   value="$(sudo asdcontrol "$device" | awk -F= '/BRIGHTNESS=/{print $2+0}')"
   omarchy-swayosd-brightness "$(( value * 100 / 60000 ))"
 fi

bin/omarchy-brightness-keyboard

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# Adjust keyboard backlight brightness using available steps.
-# Usage: omarchy-brightness-keyboard <up|down|cycle>
+# omarchy:summary=Adjust keyboard backlight brightness using available steps.
+# omarchy:args=<up|down|cycle>
 
 direction="${1:-up}"
 
@@ -23,14 +23,19 @@ fi
 max_brightness="$(brightnessctl -d "$device" max)"
 current_brightness="$(brightnessctl -d "$device" get)"
 
-# Calculate step as one unit (keyboards typically have discrete levels like 0-3).
+# Calculate step as 10% of max brightness. Keyboards with many levels (e.g. 512)
+# need larger steps; keyboards with few levels (e.g. 3) fall back to step=1.
+step=$(( max_brightness / 10 ))
+(( step < 1 )) && step=1
+
 if [[ $direction == "cycle" ]]; then
-  new_brightness=$(( (current_brightness + 1) % (max_brightness + 1) ))
+  new_brightness=$(( current_brightness + step ))
+  (( new_brightness > max_brightness )) && new_brightness=0
 elif [[ $direction == "up" ]]; then
-  new_brightness=$((current_brightness + 1))
+  new_brightness=$(( current_brightness + step ))
   (( new_brightness > max_brightness )) && new_brightness=$max_brightness
 else
-  new_brightness=$((current_brightness - 1))
+  new_brightness=$(( current_brightness - step ))
   (( new_brightness < 0 )) && new_brightness=0
 fi
 

bin/omarchy-brightness-keyboard-mute

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+# omarchy:summary=Set the mic-mute indicator LED on laptops that expose a platform::micmute LED node.
+# omarchy:args=<on|off>
+
+if [[ -e /sys/class/leds/platform::micmute/brightness ]]; then
+  case "$1" in
+    on)  value=1 ;;
+    off) value=0 ;;
+    *)   echo "Usage: $(basename "$0") <on|off>" >&2; exit 1 ;;
+  esac
+
+  brightnessctl --device="platform::micmute" set "$value" >/dev/null 2>&1 || true
+fi

bin/omarchy-capture-screenrecording

@@ -0,0 +1,294 @@
+#!/bin/bash
+
+# omarchy:summary=Start or stop screen recording
+# omarchy:group=capture
+# omarchy:args=[--with-desktop-audio] [--with-microphone-audio] [--with-webcam] [--webcam-device=<device>] [--resolution=<size>] [--stop-recording]
+# omarchy:examples=omarchy screenrecord | omarchy capture screenrecord --with-desktop-audio
+# omarchy:aliases=omarchy screenrecord
+#
+# Env: OMARCHY_SCREENRECORD_USE_PORTAL=true skips the built-in slurp picker and
+# uses gpu-screen-recorder's xdg-desktop-portal capture backend instead. The
+# portal backend was originally added (PR #3401) for HDR-aware capture, support
+# for monitors driven by external GPUs, and window capture — enable it if any
+# of those matter to you. Off by default because the portal path can fail EGL
+# DMA-BUF modifier import on some configurations, leaving recording unable to
+# start.
+#
+# Env: OMARCHY_SCREENRECORD_DEBUG=true appends gpu-screen-recorder's stderr (and
+# the picker target it was launched with) to /tmp/omarchy-screenrecord.log so
+# users can attach a log when reporting capture failures.
+
+[[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
+OUTPUT_DIR="${OMARCHY_SCREENRECORD_DIR:-${XDG_VIDEOS_DIR:-$HOME/Videos}}"
+
+if [[ ! -d $OUTPUT_DIR ]]; then
+  notify-send "Screen recording directory does not exist: $OUTPUT_DIR" -u critical -t 3000
+  exit 1
+fi
+
+DESKTOP_AUDIO="false"
+MICROPHONE_AUDIO="false"
+WEBCAM="false"
+WEBCAM_DEVICE=""
+RESOLUTION=""
+STOP_RECORDING="false"
+RECORDING_FILE="/tmp/omarchy-screenrecord-filename"
+LOG_FILE=$([[ ${OMARCHY_SCREENRECORD_DEBUG:-false} == "true" ]] && echo "/tmp/omarchy-screenrecord.log" || echo "/dev/null")
+
+for arg in "$@"; do
+  case "$arg" in
+  --with-desktop-audio) DESKTOP_AUDIO="true" ;;
+  --with-microphone-audio) MICROPHONE_AUDIO="true" ;;
+  --with-webcam) WEBCAM="true" ;;
+  --webcam-device=*) WEBCAM_DEVICE="${arg#*=}" ;;
+  --resolution=*) RESOLUTION="${arg#*=}" ;;
+  --stop-recording) STOP_RECORDING="true" ;;
+  esac
+done
+
+start_webcam_overlay() {
+  cleanup_webcam
+
+  # Auto-detect first available webcam if none specified
+  if [[ -z $WEBCAM_DEVICE ]]; then
+    WEBCAM_DEVICE=$(v4l2-ctl --list-devices 2>/dev/null | grep -m1 "^[[:space:]]*/dev/video" | tr -d '\t')
+    if [[ -z $WEBCAM_DEVICE ]]; then
+      notify-send "No webcam devices found" -u critical -t 3000
+      return 1
+    fi
+  fi
+
+  # Get monitor scale
+  local scale=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .scale')
+
+  # Target width (base 360px, scaled to monitor)
+  local target_width=$(awk "BEGIN {printf \"%.0f\", 360 * $scale}")
+
+  # Try preferred 16:9 resolutions in order, use first available
+  local preferred_resolutions=("640x360" "1280x720" "1920x1080")
+  local video_size_arg=""
+  local available_formats=$(v4l2-ctl --list-formats-ext -d "$WEBCAM_DEVICE" 2>/dev/null)
+
+  for resolution in "${preferred_resolutions[@]}"; do
+    if echo "$available_formats" | grep -q "$resolution"; then
+      video_size_arg="-video_size $resolution"
+      break
+    fi
+  done
+
+  ffplay -f v4l2 $video_size_arg -framerate 30 "$WEBCAM_DEVICE" \
+    -vf "crop=iw/2:ih,scale=${target_width}:-1" \
+    -window_title "WebcamOverlay" \
+    -noborder \
+    -fflags nobuffer -flags low_delay \
+    -probesize 32 -analyzeduration 0 \
+    -loglevel quiet &
+  sleep 1
+}
+
+cleanup_webcam() {
+  pkill -f "WebcamOverlay" 2>/dev/null
+}
+
+default_resolution() {
+  local width height
+  read -r width height < <(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | "\(.width) \(.height)"')
+  if ((width > 3840 || height > 2160)); then
+    echo "3840x2160"
+  else
+    echo "0x0"
+  fi
+}
+
+# Monitor + window rectangles on the focused workspace, in slurp's "X,Y WxH" format.
+# Mirrors omarchy-capture-screenshot so the picker UX is identical.
+get_rectangles() {
+  local active_workspace=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .activeWorkspace.id')
+  hyprctl monitors -j | jq -r --arg ws "$active_workspace" '
+    .[] | select(.activeWorkspace.id == ($ws | tonumber)) |
+    "\(.x),\(.y) \(.width / .scale | floor)x\(.height / .scale | floor)"'
+  hyprctl clients -j | jq -r --arg ws "$active_workspace" '
+    .[] | select(.workspace.id == ($ws | tonumber)) |
+    "\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1])"'
+}
+
+# Echoes "monitor:NAME" when the selection matches an entire monitor, otherwise
+# "region:WxH+X+Y" with physical-pixel coordinates ready for gpu-screen-recorder.
+# Returns non-zero if the user cancelled the picker.
+select_capture_target() {
+  local rects=$(get_rectangles)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  local picker_pid=$!
+  sleep .1
+  local selection=$(echo "$rects" | slurp 2>/dev/null)
+  kill $picker_pid 2>/dev/null
+
+  # X and Y can be negative (Hyprland monitor positions in multi-display layouts);
+  # widths and heights are always positive.
+  [[ $selection =~ ^(-?[0-9]+),(-?[0-9]+)[[:space:]]([0-9]+)x([0-9]+)$ ]] || return 1
+  local sx=${BASH_REMATCH[1]} sy=${BASH_REMATCH[2]}
+  local sw=${BASH_REMATCH[3]} sh=${BASH_REMATCH[4]}
+
+  # A bare click (area < 20px²) snaps to whichever rectangle the click landed
+  # inside, so users don't end up with accidental 2px recordings.
+  if ((sw * sh < 20)); then
+    while IFS= read -r rect; do
+      [[ $rect =~ ^(-?[0-9]+),(-?[0-9]+)[[:space:]]([0-9]+)x([0-9]+)$ ]] || continue
+      local rx=${BASH_REMATCH[1]} ry=${BASH_REMATCH[2]}
+      local rw=${BASH_REMATCH[3]} rh=${BASH_REMATCH[4]}
+      if ((sx >= rx && sx < rx + rw && sy >= ry && sy < ry + rh)); then
+        sx=$rx sy=$ry sw=$rw sh=$rh
+        break
+      fi
+    done <<<"$rects"
+  fi
+
+  # When the selection exactly matches a monitor, prefer -w <monitor> over a
+  # region capture — same kms backend, but no scaling math and full native res.
+  local monitor=$(hyprctl monitors -j | jq -r --argjson x "$sx" --argjson y "$sy" --argjson w "$sw" --argjson h "$sh" '
+    .[] | select(.x == $x and .y == $y and (.width / .scale | floor) == $w and (.height / .scale | floor) == $h) | .name' | head -1)
+
+  if [[ -n $monitor ]]; then
+    echo "monitor:$monitor"
+    return
+  fi
+
+  # gpu-screen-recorder wants region geometry in the compositor's logical
+  # coordinate space — same space slurp returns — so pass the values through
+  # untouched. (gsr scales to physical pixels itself based on the monitor.)
+  echo "region:${sw}x${sh}+${sx}+${sy}"
+}
+
+start_screenrecording() {
+  local capture_args=()
+  local target
+
+  # Opt-in path for HDR, external-GPU monitors, and window capture (all things
+  # the portal backend supports and the kms backend doesn't). Default flow uses
+  # slurp + the kms backend, which avoids the EGL DMA-BUF modifier import
+  # failures the portal path can hit on some configurations.
+  if [[ ${OMARCHY_SCREENRECORD_USE_PORTAL:-false} == "true" ]]; then
+    target="portal"
+    capture_args=(-w portal -s "${RESOLUTION:-$(default_resolution)}")
+  else
+    target=$(select_capture_target) || return 1
+
+    case $target in
+    monitor:*)
+      capture_args=(-w "${target#monitor:}" -s "${RESOLUTION:-$(default_resolution)}")
+      ;;
+    region:*)
+      capture_args=(-w "${target#region:}")
+      [[ -n $RESOLUTION ]] && capture_args+=(-s "$RESOLUTION")
+      ;;
+    esac
+  fi
+
+  [[ $WEBCAM == "true" ]] && start_webcam_overlay
+
+  local filename="$OUTPUT_DIR/screenrecording-$(date +'%Y-%m-%d_%H-%M-%S').mp4"
+  local audio_devices=""
+  local audio_args=()
+
+  [[ $DESKTOP_AUDIO == "true" ]] && audio_devices+="default_output"
+
+  if [[ $MICROPHONE_AUDIO == "true" ]]; then
+    # Merge audio tracks into one - separate tracks only play one at a time in most players
+    [[ -n $audio_devices ]] && audio_devices+="|"
+    audio_devices+="default_input"
+  fi
+
+  [[ -n $audio_devices ]] && audio_args+=(-a "$audio_devices" -ac aac)
+
+  echo "===== $(date '+%F %T') args: $* target: $target =====" >>"$LOG_FILE"
+  gpu-screen-recorder "${capture_args[@]}" -k auto -f 60 -fm cfr -fallback-cpu-encoding yes -o "$filename" "${audio_args[@]}" 2>>"$LOG_FILE" &
+  local pid=$!
+
+  while kill -0 $pid 2>/dev/null && [[ ! -f $filename ]]; do
+    sleep 0.2
+  done
+
+  if kill -0 $pid 2>/dev/null; then
+    echo "$filename" >"$RECORDING_FILE"
+    toggle_screenrecording_indicator
+  fi
+}
+
+stop_screenrecording() {
+  pkill -SIGINT -f "^gpu-screen-recorder" # SIGINT required to save video properly
+
+  # Wait a maximum of 5 seconds to finish before hard killing
+  local count=0
+  while pgrep -f "^gpu-screen-recorder" >/dev/null && ((count < 50)); do
+    sleep 0.1
+    count=$((count + 1))
+  done
+
+  toggle_screenrecording_indicator
+  cleanup_webcam
+
+  if pgrep -f "^gpu-screen-recorder" >/dev/null; then
+    pkill -9 -f "^gpu-screen-recorder"
+    notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
+  else
+    finalize_recording
+    local filename=$(cat "$RECORDING_FILE" 2>/dev/null)
+    local preview="${filename%.mp4}-preview.png"
+
+    # Generate a preview thumbnail from the first frame
+    ffmpeg -y -i "$filename" -ss 00:00:00.1 -vframes 1 -q:v 2 "$preview" -loglevel quiet 2>/dev/null
+
+    (
+      ACTION=$(notify-send "Screen recording saved" "Open with Super + Alt + , (or click this)" -t 10000 -i "${preview:-$filename}" -A "default=open")
+      [[ $ACTION == "default" ]] && mpv "$filename"
+      rm -f "$preview"
+    ) &
+  fi
+
+  rm -f "$RECORDING_FILE"
+}
+
+toggle_screenrecording_indicator() {
+  pkill -RTMIN+8 waybar
+}
+
+screenrecording_active() {
+  pgrep -f "^gpu-screen-recorder" >/dev/null
+}
+
+finalize_recording() {
+  local latest
+  latest=$(cat "$RECORDING_FILE" 2>/dev/null)
+  [[ -f $latest ]] || return
+
+  # Re-encode only when the first GOP contains discardable warmup packets — stream copy can't
+  # trim those (it rewinds to the keyframe). Clean recordings stay on the fast stream-copy path.
+  local video_codec=(-c:v copy)
+  if ffprobe -v error -select_streams v:0 -read_intervals %+0.2 -show_entries packet=flags -of csv=p=0 "$latest" 2>/dev/null | grep -q D; then
+    video_codec=(-c:v libx264 -preset veryfast -crf 20)
+  fi
+
+  # Trim the first frame, and normalize audio to -14 LUFS if present, in a single pass
+  local args=(-y -ss 0.1 -i "$latest" "${video_codec[@]}")
+  if ffprobe -v error -select_streams a -show_entries stream=codec_type -of csv=p=0 "$latest" 2>/dev/null | grep -q audio; then
+    # Hard-mute the first 400ms to drop the PipeWire capture-open pop (a near-clipping
+    # transient around 130-200ms that a gentle fade-in can't attenuate enough), then a
+    # 50ms fade avoids a click at the boundary before loudnorm normalizes the rest.
+    args+=(-af "volume=enable='lt(t,0.4)':volume=0,afade=t=in:st=0.4:d=0.05,loudnorm=I=-14:TP=-1.5:LRA=11")
+  fi
+
+  local processed="${latest%.mp4}-processed.mp4"
+  if ffmpeg "${args[@]}" "$processed" -loglevel quiet 2>/dev/null; then
+    mv "$processed" "$latest"
+  else
+    rm -f "$processed"
+  fi
+}
+
+if screenrecording_active; then
+  stop_screenrecording
+elif [[ $STOP_RECORDING == "true" ]]; then
+  exit 1
+else
+  start_screenrecording || cleanup_webcam
+fi

bin/omarchy-capture-screenshot

@@ -1,15 +1,17 @@
 #!/bin/bash
 
-# Take a screenshot of the whole screen, a specific window, or a user-drawn region.
-# Saves to ~/Pictures by default, but that can be changed via OMARCHY_SCREENSHOT_DIR or XDG_PICTURES_DIR ENVs.
-# Editor defaults to Satty but can be changed via --editor=<name> or OMARCHY_SCREENSHOT_EDITOR env
+# omarchy:summary=Take a screenshot
+# omarchy:group=capture
+# omarchy:args=[smart|region|windows|fullscreen] [slurp|copy] [--editor=<name>]
+# omarchy:examples=omarchy screenshot | omarchy capture screenshot region
+# omarchy:aliases=omarchy screenshot
 
 [[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
 OUTPUT_DIR="${OMARCHY_SCREENSHOT_DIR:-${XDG_PICTURES_DIR:-$HOME/Pictures}}"
 
 if [[ ! -d $OUTPUT_DIR ]]; then
-  notify-send "Screenshot directory does not exist: $OUTPUT_DIR" -u critical -t 3000
-  exit 1
+  mkdir -p "$OUTPUT_DIR"
+  notify-send "Created screenshot directory: $OUTPUT_DIR" -u normal -t 2000
 fi
 
 pkill slurp && exit 0
@@ -63,29 +65,36 @@ get_rectangles() {
   hyprctl clients -j | jq -r --arg ws "$active_workspace" '.[] | select(.workspace.id == ($ws | tonumber)) | "\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1])"'
 }
 
+# Keep hyprpicker alive until after grim captures so the screenshot sees the
+# frozen overlay rather than live content shifting during teardown.
+cleanup_freeze() {
+  [[ -n $PID ]] && kill $PID 2>/dev/null
+}
+trap cleanup_freeze EXIT
+
 # Select based on mode
 case "$MODE" in
-  region)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(slurp 2>/dev/null)
-    kill $PID 2>/dev/null
-    ;;
-  windows)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
-    kill $PID 2>/dev/null
-    ;;
-  fullscreen)
-    SELECTION=$(hyprctl monitors -j | jq -r "${JQ_MONITOR_GEO} .[] | select(.focused == true) | format_geo")
-    ;;
-  smart|*)
-    RECTS=$(get_rectangles)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
-    kill $PID 2>/dev/null
+region)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(slurp 2>/dev/null)
+  ;;
+windows)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
+  ;;
+fullscreen)
+  SELECTION=$(hyprctl monitors -j | jq -r "${JQ_MONITOR_GEO} .[] | select(.focused == true) | format_geo")
+  ;;
+smart | *)
+  RECTS=$(get_rectangles)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
 
   # If the selection area is L * W < 20, we'll assume you were trying to select whichever
   # window or output it was inside of to prevent accidental 2px snapshots

bin/omarchy-capture-text-extraction

@@ -0,0 +1,26 @@
+#!/bin/bash
+
+# omarchy:summary=Extract text from a screenshot region with OCR
+# omarchy:group=capture
+# omarchy:examples=omarchy capture ocr
+
+# Keep hyprpicker alive until after grim captures so the screenshot sees the
+# frozen overlay rather than live content shifting during teardown.
+cleanup_freeze() {
+  [[ -n $PID ]] && kill $PID 2>/dev/null
+}
+trap cleanup_freeze EXIT
+
+hyprpicker -r -z >/dev/null 2>&1 &
+PID=$!
+sleep .1
+SELECTION=$(slurp 2>/dev/null)
+
+[[ -z $SELECTION ]] && exit 0
+
+TEXT=$(grim -g "$SELECTION" - | tesseract stdin stdout --oem 1 --psm 6 -l eng --dpi 300 -c preserve_interword_spaces=1 2>/dev/null) || exit 1
+
+[[ -z $TEXT ]] && exit 1
+
+printf "%s" "$TEXT" | wl-copy
+notify-send "󰴑    Copied text from selection to clipboard"

bin/omarchy-channel-set

@@ -1,17 +1,8 @@
 #!/bin/bash
 
-# Set the Omarchy channel, which dictates what git branch and package repository is used.
-#
-# Stable uses the master branch, which only sees updates on official releases, and
-# the stable package repository, which typically lags the edge by a month to ensure
-# better compatibility.
-#
-# Edge tracks the latest package repository, but still relies on the master branch,
-# so new packages which require config changes may cause conflicts or errors.
-#
-# Dev tracks the active development dev branch, which may include partial or broken updates,
-# as well as the latest package repository. This should only be used by Omarchy developers
-# and people with a lot of experience managing Linux systems.
+# omarchy:summary=Set the Omarchy channel, which dictates what git branch and package repository is used.
+# omarchy:args=<stable|rc|edge|dev>
+# omarchy:requires-sudo=true
 
 if (($# == 0)); then
   echo "Usage: omarchy-channel-set [stable|rc|edge|dev]"

bin/omarchy-cmd-missing

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Returns true if any of the commands passed in as arguments are missing on the system.
+# omarchy:summary=Check whether any required commands are missing
 
 for cmd in "$@"; do
   if ! command -v "$cmd" &>/dev/null; then

bin/omarchy-cmd-present

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Returns true if all the commands passed in as arguments exit on the system.
+# omarchy:summary=Check whether all required commands are available
 
 for cmd in "$@"; do
   command -v "$cmd" &>/dev/null || exit 1

bin/omarchy-cmd-screenrecord

@@ -1,174 +0,0 @@
-#!/bin/bash
-
-# Start and stop a screenrecording, which will be saved to ~/Videos by default.
-# Alternative location can be set via OMARCHY_SCREENRECORD_DIR or XDG_VIDEOS_DIR ENVs.
-# Resolution is capped to 4K for monitors above 4K, native otherwise.
-# Override via --resolution= (e.g. --resolution=1920x1080, --resolution=0x0 for native).
-
-[[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
-OUTPUT_DIR="${OMARCHY_SCREENRECORD_DIR:-${XDG_VIDEOS_DIR:-$HOME/Videos}}"
-
-if [[ ! -d $OUTPUT_DIR ]]; then
-  notify-send "Screen recording directory does not exist: $OUTPUT_DIR" -u critical -t 3000
-  exit 1
-fi
-
-DESKTOP_AUDIO="false"
-MICROPHONE_AUDIO="false"
-WEBCAM="false"
-WEBCAM_DEVICE=""
-RESOLUTION=""
-STOP_RECORDING="false"
-RECORDING_FILE="/tmp/omarchy-screenrecord-filename"
-
-for arg in "$@"; do
-  case "$arg" in
-  --with-desktop-audio) DESKTOP_AUDIO="true" ;;
-  --with-microphone-audio) MICROPHONE_AUDIO="true" ;;
-  --with-webcam) WEBCAM="true" ;;
-  --webcam-device=*) WEBCAM_DEVICE="${arg#*=}" ;;
-  --resolution=*) RESOLUTION="${arg#*=}" ;;
-  --stop-recording) STOP_RECORDING="true" ;;
-  esac
-done
-
-start_webcam_overlay() {
-  cleanup_webcam
-
-  # Auto-detect first available webcam if none specified
-  if [[ -z $WEBCAM_DEVICE ]]; then
-    WEBCAM_DEVICE=$(v4l2-ctl --list-devices 2>/dev/null | grep -m1 "^[[:space:]]*/dev/video" | tr -d '\t')
-    if [[ -z $WEBCAM_DEVICE ]]; then
-      notify-send "No webcam devices found" -u critical -t 3000
-      return 1
-    fi
-  fi
-
-  # Get monitor scale
-  local scale=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .scale')
-
-  # Target width (base 360px, scaled to monitor)
-  local target_width=$(awk "BEGIN {printf \"%.0f\", 360 * $scale}")
-
-  # Try preferred 16:9 resolutions in order, use first available
-  local preferred_resolutions=("640x360" "1280x720" "1920x1080")
-  local video_size_arg=""
-  local available_formats=$(v4l2-ctl --list-formats-ext -d "$WEBCAM_DEVICE" 2>/dev/null)
-
-  for resolution in "${preferred_resolutions[@]}"; do
-    if echo "$available_formats" | grep -q "$resolution"; then
-      video_size_arg="-video_size $resolution"
-      break
-    fi
-  done
-
-  ffplay -f v4l2 $video_size_arg -framerate 30 "$WEBCAM_DEVICE" \
-    -vf "scale=${target_width}:-1" \
-    -window_title "WebcamOverlay" \
-    -noborder \
-    -fflags nobuffer -flags low_delay \
-    -probesize 32 -analyzeduration 0 \
-    -loglevel quiet &
-  sleep 1
-}
-
-cleanup_webcam() {
-  pkill -f "WebcamOverlay" 2>/dev/null
-}
-
-default_resolution() {
-  local width height
-  read -r width height < <(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | "\(.width) \(.height)"')
-  if ((width > 3840 || height > 2160)); then
-    echo "3840x2160"
-  else
-    echo "0x0"
-  fi
-}
-
-start_screenrecording() {
-  local filename="$OUTPUT_DIR/screenrecording-$(date +'%Y-%m-%d_%H-%M-%S').mp4"
-  local audio_devices=""
-  local audio_args=()
-
-  [[ $DESKTOP_AUDIO == "true" ]] && audio_devices+="default_output"
-
-  if [[ $MICROPHONE_AUDIO == "true" ]]; then
-    # Merge audio tracks into one - separate tracks only play one at a time in most players
-    [[ -n $audio_devices ]] && audio_devices+="|"
-    audio_devices+="default_input"
-  fi
-
-  [[ -n $audio_devices ]] && audio_args+=(-a "$audio_devices" -ac aac)
-
-  local resolution="${RESOLUTION:-$(default_resolution)}"
-
-  gpu-screen-recorder -w portal -k auto -s "$resolution" -f 60 -fm cfr -fallback-cpu-encoding yes -o "$filename" "${audio_args[@]}" &
-  local pid=$!
-
-  # Wait for recording to actually start (file appears after portal selection)
-  while kill -0 $pid 2>/dev/null && [[ ! -f $filename ]]; do
-    sleep 0.2
-  done
-
-  if kill -0 $pid 2>/dev/null; then
-    echo "$filename" >"$RECORDING_FILE"
-    toggle_screenrecording_indicator
-  fi
-}
-
-stop_screenrecording() {
-  pkill -SIGINT -f "^gpu-screen-recorder" # SIGINT required to save video properly
-
-  # Wait a maximum of 5 seconds to finish before hard killing
-  local count=0
-  while pgrep -f "^gpu-screen-recorder" >/dev/null && ((count < 50)); do
-    sleep 0.1
-    count=$((count + 1))
-  done
-
-  toggle_screenrecording_indicator
-  cleanup_webcam
-
-  if pgrep -f "^gpu-screen-recorder" >/dev/null; then
-    pkill -9 -f "^gpu-screen-recorder"
-    notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
-  else
-    trim_first_frame
-    notify-send "Screen recording saved to $OUTPUT_DIR" -t 2000
-  fi
-
-  rm -f "$RECORDING_FILE"
-}
-
-toggle_screenrecording_indicator() {
-  pkill -RTMIN+8 waybar
-}
-
-screenrecording_active() {
-  pgrep -f "^gpu-screen-recorder" >/dev/null
-}
-
-trim_first_frame() {
-  local latest
-  latest=$(cat "$RECORDING_FILE" 2>/dev/null)
-
-  if [[ -n $latest && -f $latest ]]; then
-    local trimmed="${latest%.mp4}-trimmed.mp4"
-    if ffmpeg -y -ss 0.1 -i "$latest" -c copy "$trimmed" -loglevel quiet 2>/dev/null; then
-      mv "$trimmed" "$latest"
-    else
-      rm -f "$trimmed"
-    fi
-  fi
-}
-
-if screenrecording_active; then
-  stop_screenrecording
-elif [[ $STOP_RECORDING == "true" ]]; then
-  exit 1
-else
-  [[ $WEBCAM == "true" ]] && start_webcam_overlay
-
-  start_screenrecording || cleanup_webcam
-fi

bin/omarchy-cmd-terminal-cwd

@@ -1,9 +1,7 @@
 #!/bin/bash
 
-# Returns the current working directory of the active terminal window,
-# so a new terminal window can be started in the same directory.
+# omarchy:summary=Print the current working directory of the active terminal window
 
-# Go from current active terminal to its child shell process and run cwd there
 terminal_pid=$(hyprctl activewindow | awk '/pid:/ {print $2}')
 shell_pid=$(pgrep -P "$terminal_pid" | tail -n1)
 

bin/omarchy-config-direct-boot

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# Add an EFI boot entry for the Omarchy UKI, allowing the system to boot directly
-# without a bootloader like Limine. Requires UEFI firmware and a built UKI.
+# omarchy:summary=Add or remove an EFI boot entry for the Omarchy UKI, allowing the system to boot directly
+# omarchy:requires-sudo=true
 
 if [[ ! -d /sys/firmware/efi ]]; then
   echo "Error: System is not booted in UEFI mode" >&2
@@ -23,23 +23,36 @@ if cat /sys/class/dmi/id/bios_vendor 2>/dev/null | grep -qi "Apple"; then
   exit 1
 fi
 
-uki_file=$(find /boot/EFI/Linux/ -name "omarchy*.efi" -printf "%f\n" 2>/dev/null | head -1)
+existing_entry=$(efibootmgr | grep -E "^Boot[0-9A-Fa-f]+\*? Omarchy([[:space:]]|$)" | head -1)
 
-if [[ -z $uki_file ]]; then
-  echo "Error: No Omarchy UKI found in /boot/EFI/Linux/" >&2
-  exit 1
-fi
-
-boot_source=$(findmnt -n -o SOURCE /boot)
-disk=$(echo "$boot_source" | sed 's/p\?[0-9]*$//')
-part=$(echo "$boot_source" | grep -o 'p\?[0-9]*$' | sed 's/^p//')
-
-if gum confirm "Setup direct boot (so snapshot booting must be done via bios)?"; then
-  echo "Creating EFI boot entry for $uki_file"
-
-  sudo efibootmgr --create \
-    --disk "$disk" \
-    --part "$part" \
-    --label "Omarchy" \
-    --loader "\\EFI\\Linux\\$uki_file"
+if [[ -n $existing_entry ]]; then
+  boot_num=$(echo "$existing_entry" | sed -n 's/^Boot\([0-9A-Fa-f]\+\).*/\1/p')
+
+  if gum confirm "Disable direct boot (remove Omarchy EFI entry)?"; then
+    echo "Removing EFI boot entry $boot_num"
+    sudo efibootmgr --bootnum "$boot_num" --delete-bootnum >/dev/null
+  fi
+
+  exit 0
+else
+  uki_file=$(find /boot/EFI/Linux/ -name "omarchy*.efi" -printf "%f\n" 2>/dev/null | head -1)
+
+  if [[ -z $uki_file ]]; then
+    echo "Error: No Omarchy UKI found in /boot/EFI/Linux/" >&2
+    exit 1
+  fi
+
+  boot_source=$(findmnt -n -o SOURCE /boot)
+  disk=$(echo "$boot_source" | sed 's/p\?[0-9]*$//')
+  part=$(echo "$boot_source" | grep -o 'p\?[0-9]*$' | sed 's/^p//')
+
+  if gum confirm "Setup direct boot (so snapshot booting must be done via bios)?"; then
+    echo "Creating EFI boot entry for $uki_file"
+
+    sudo efibootmgr --create \
+      --disk "$disk" \
+      --part "$part" \
+      --label "Omarchy" \
+      --loader "\\EFI\\Linux\\$uki_file"
+  fi
 fi

bin/omarchy-debug

@@ -1,6 +1,9 @@
 #!/bin/bash
 
-# Return exhaustive debugging information about the system to help diagnose problems.
+# omarchy:summary=Print debugging information
+# omarchy:args=[--no-sudo] [--print]
+# omarchy:examples=omarchy debug --print --no-sudo
+# omarchy:requires-sudo=true
 
 NO_SUDO=false
 PRINT_ONLY=false

bin/omarchy-dev-add-migration

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# Creates a new Omarchy migration named after the unix timestamp of the last commit.
-# Only intended for Omarchy developers.
+# omarchy:summary=Creates a new Omarchy migration named after the unix timestamp of the last commit.
 
 cd ~/.local/share/omarchy
 migration_file="$HOME/.local/share/omarchy/migrations/$(git log -1 --format=%cd --date=unix).sh"

bin/omarchy-dev-benchmark

@@ -0,0 +1,111 @@
+#!/bin/bash
+
+# omarchy:summary=Measure Omarchy CLI response times
+# omarchy:args=[--repeat=<count>]
+# omarchy:examples=omarchy dev benchmark | omarchy dev benchmark --repeat=10
+
+set -euo pipefail
+
+OMARCHY_BIN_DIR=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)
+CLI="$OMARCHY_BIN_DIR/omarchy"
+REPEAT=5
+
+show_help() {
+  cat <<'EOF'
+Usage:
+  omarchy dev benchmark [--repeat=<count>]
+
+Measure response times for common Omarchy CLI surfaces.
+
+Options:
+  --repeat=<count>  Number of times to run each case (default: 5)
+EOF
+}
+
+now_us() {
+  local now="${EPOCHREALTIME/./}"
+  printf '%s' "$now"
+}
+
+format_ms() {
+  local us="$1"
+  printf '%d.%03d' "$(( us / 1000 ))" "$(( us % 1000 ))"
+}
+
+run_case() {
+  local label="$1"
+  shift
+  local total_us=0
+  local min_us=0
+  local max_us=0
+  local elapsed_us=0
+  local start_us=0
+  local end_us=0
+  local status=0
+
+  for (( i = 1; i <= REPEAT; i++ )); do
+    start_us=$(now_us)
+    if "$@" >/dev/null; then
+      status=0
+    else
+      status=$?
+    fi
+    end_us=$(now_us)
+
+    if (( status != 0 )); then
+      printf '%-34s failed (exit %d)\n' "$label" "$status"
+      return "$status"
+    fi
+
+    elapsed_us=$(( end_us - start_us ))
+    total_us=$(( total_us + elapsed_us ))
+
+    if (( i == 1 || elapsed_us < min_us )); then
+      min_us=$elapsed_us
+    fi
+
+    if (( elapsed_us > max_us )); then
+      max_us=$elapsed_us
+    fi
+  done
+
+  printf '%-34s avg %8s ms  min %8s ms  max %8s ms\n' \
+    "$label" \
+    "$(format_ms "$(( total_us / REPEAT ))")" \
+    "$(format_ms "$min_us")" \
+    "$(format_ms "$max_us")"
+}
+
+while (( $# > 0 )); do
+  case "$1" in
+  --repeat=*)
+    REPEAT="${1#*=}"
+    ;;
+  --help | -h)
+    show_help
+    exit 0
+    ;;
+  *)
+    echo "Unknown option: $1" >&2
+    show_help >&2
+    exit 2
+    ;;
+  esac
+  shift
+done
+
+if [[ ! $REPEAT =~ ^[0-9]+$ ]] || (( REPEAT < 1 )); then
+  echo "--repeat must be a positive integer" >&2
+  exit 2
+fi
+
+printf 'Omarchy CLI benchmark (%d runs each)\n\n' "$REPEAT"
+run_case "omarchy" "$CLI"
+run_case "omarchy --help" "$CLI" --help
+run_case "omarchy commands" "$CLI" commands
+run_case "omarchy commands --json" "$CLI" commands --json
+run_case "omarchy commands --all --json" "$CLI" commands --all --json
+run_case "omarchy theme set --help" "$CLI" theme set --help
+run_case "omarchy screenshot --help" "$CLI" screenshot --help
+run_case "omarchy restart --help" "$CLI" restart --help
+run_case "omarchy theme current" "$CLI" theme current

bin/omarchy-dev-bin-metadata

@@ -0,0 +1,86 @@
+#!/bin/bash
+
+# omarchy:summary=Show Omarchy bin metadata fields and defaults
+# omarchy:args=[--json]
+
+set -euo pipefail
+
+show_json() {
+  jq -n '{
+    ok: true,
+    defaults: {
+      group: "first filename segment after omarchy-",
+      name: "remaining filename segments with dashes converted to spaces",
+      route: "omarchy <group> <name>",
+      binary: "filename",
+      requires_sudo: false
+    },
+    fields: [
+      {name: "summary", required: true, type: "string", note: "One-line human and agent-facing description."},
+      {name: "group", required: false, type: "string", note: "Only set when the route group should differ from the filename-derived group."},
+      {name: "name", required: false, type: "string", note: "Only set when the route name should differ from the filename-derived name. May be empty for root commands."},
+      {name: "args", required: false, type: "string", note: "Only set when the command accepts arguments."},
+      {name: "examples", required: false, type: "string", note: "Pipe-separated examples."},
+      {name: "aliases", required: false, type: "string", note: "Pipe-separated alternate routes, e.g. omarchy screenshot."},
+      {name: "requires-sudo", required: false, type: "true", default: false, note: "Only include when true."}
+    ]
+  }'
+}
+
+show_help() {
+  cat <<'EOF'
+Omarchy bin metadata
+
+Metadata lives in the top comment block of each executable bin/omarchy-* file.
+Keep it slim: define only fields that are required or override defaults.
+
+Required:
+  # omarchy:summary=<one-line description>
+
+Inferred defaults:
+  group         first filename segment after omarchy-
+  name          remaining filename segments, with dashes converted to spaces
+  route         omarchy <group> <name>
+  binary        filename
+  requires-sudo false
+
+Optional fields:
+  # omarchy:group=<group>                  route override only
+  # omarchy:name=<name>                    route override only; may be empty
+  # omarchy:args=<args>                    only if the command accepts args
+  # omarchy:examples=<cmd> | <cmd>         pipe-separated examples
+  # omarchy:aliases=<route> | <route>      pipe-separated alternate routes
+  # omarchy:requires-sudo=true             only when true
+
+Do not define:
+  binary      inferred from filename
+  usage       derived from route + args
+  false flags or empty args
+
+Examples:
+  # omarchy:summary=Restart Walker and related user services
+
+  # omarchy:summary=Take a screenshot
+  # omarchy:group=capture
+  # omarchy:args=[smart|region|windows|fullscreen] [slurp|copy] [--editor=<name>]
+  # omarchy:examples=omarchy screenshot | omarchy capture screenshot region
+  # omarchy:aliases=omarchy screenshot
+EOF
+}
+
+case "${1:-}" in
+--json)
+  show_json
+  ;;
+--help | -h)
+  show_help
+  ;;
+"")
+  show_help
+  ;;
+*)
+  echo "Unknown option: $1" >&2
+  show_help >&2
+  exit 2
+  ;;
+esac

bin/omarchy-drive-info

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# Returns drive information about a given volumne, like /dev/nvme0, which is used by omarchy-drive-select.
+# omarchy:summary=Print drive information such as size, model, and mount details
+# omarchy:args=<drive>
 
 if (($# == 0)); then
   echo "Usage: omarchy-drive-info [/dev/drive]"

bin/omarchy-drive-select

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Select a drive from a list with info that includes space and brand. Used by omarchy-drive-set-password.
+# omarchy:summary=Select a drive from a list with info that includes space and brand. Used by omarchy-drive-set-password.
 
 if (($# == 0)); then
   drives=$(lsblk -dpno NAME | grep -E '/dev/(sd|hd|vd|nvme|mmcblk|xv)')

bin/omarchy-drive-set-password

@@ -1,11 +1,12 @@
 #!/bin/bash
 
-# Set a new encryption password for a drive selected.
+# omarchy:summary=Set a new encryption password for a drive selected.
+# omarchy:requires-sudo=true
 
 encrypted_drives=$(blkid -t TYPE=crypto_LUKS -o device)
 
 if [[ -n $encrypted_drives ]]; then
-  if (( $(wc -l <<<encrypted_drives) == 1 )); then
+  if (( $(wc -l <<<"$encrypted_drives") == 1 )); then
     drive_to_change="$encrypted_drives"
   else
     drive_to_change="$(omarchy-drive-select "$encrypted_drives")"

bin/omarchy-first-run

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# Finish the installation of Omarchy with items that can only be done after logging in.
+# omarchy:summary=Finish the installation of Omarchy with items that can only be done after logging in.
+# omarchy:requires-sudo=true
 
 set -e
 
@@ -10,10 +11,12 @@ if [[ -f $FIRST_RUN_MODE ]]; then
   rm -f "$FIRST_RUN_MODE"
 
   bash "$OMARCHY_PATH/install/first-run/battery-monitor.sh"
+  bash "$OMARCHY_PATH/install/first-run/recover-internal-monitor.sh"
   bash "$OMARCHY_PATH/install/first-run/cleanup-reboot-sudoers.sh"
   bash "$OMARCHY_PATH/install/first-run/firewall.sh"
   bash "$OMARCHY_PATH/install/first-run/dns-resolver.sh"
   bash "$OMARCHY_PATH/install/first-run/gnome-theme.sh"
+  bash "$OMARCHY_PATH/install/first-run/gtk-primary-paste.sh"
   bash "$OMARCHY_PATH/install/first-run/elephant.sh"
   sudo rm -f /etc/sudoers.d/first-run
 

bin/omarchy-font-current

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Returns the name of the current monospace font being used by extracting it from the Waybar stylesheet.
-# This can be changed using omarchy-font-set.
+# omarchy:summary=Show current monospace font
+# omarchy:examples=omarchy font current
 
 grep -oP 'font-family:\s*["'\'']?\K[^;"'\'']+' ~/.config/waybar/style.css | head -n1

bin/omarchy-font-list

@@ -1,5 +1,6 @@
 #!/bin/bash
 
-# Returns a list of all the monospace fonts available on the system that can be set using omarchy-font-set.
+# omarchy:summary=List available monospace fonts
+# omarchy:examples=omarchy font list | omarchy font set "CaskaydiaMono Nerd Font"
 
 fc-list :spacing=100 -f "%{family[0]}\n" | grep -v -i -E 'emoji|signwriting|omarchy' | sort -u

bin/omarchy-font-set

@@ -1,7 +1,8 @@
 #!/bin/bash
 
-# Set the system-wide monospace font that should be used by the terminal, hyprlock, waybar, swayosd, etc.
-# The font name must be one of the ones returned by omarchy-font-list.
+# omarchy:summary=Set the system monospace font
+# omarchy:args=<font-name>
+# omarchy:examples=omarchy font list | omarchy font set "CaskaydiaMono Nerd Font"
 
 font_name="$1"
 
@@ -33,7 +34,7 @@ if [[ -n $font_name ]]; then
     omarchy-restart-swayosd
 
     if pgrep -x ghostty; then
-      notify-send "    You must restart Ghostty to see font change"
+      notify-send -u low "    You must restart Ghostty to see font change"
     fi
 
     omarchy-hook font-set "$font_name"

bin/omarchy-haptic-touchpad

@@ -0,0 +1,96 @@
+#!/usr/bin/env python3
+
+# omarchy:summary=Run the Synaptics touchpad haptic feedback daemon
+
+"""Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
+
+Monitors touchpad button press events and sends haptic pulses via HID
+feature reports. Required because the kernel's HID haptic subsystem only
+supports Auto Trigger with waveform enumeration, not the simpler Manual
+Trigger protocol used by these Synaptics touchpads.
+"""
+
+import fcntl, glob, os, struct, sys
+
+VENDOR = "06CB"
+REPORT_ID = 0x37
+INTENSITY = 40  # 0-100
+
+# input_event: struct timeval (16 bytes on 64-bit) + type(H) + code(H) + value(i)
+EVENT_FORMAT = "llHHi"
+EVENT_SIZE = struct.calcsize(EVENT_FORMAT)
+EV_KEY = 0x01
+BTN_LEFT = 272
+BTN_RIGHT = 273
+BTN_MIDDLE = 274
+
+# ioctl: HIDIOCSFEATURE(len) = _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+def HIDIOCSFEATURE(length):
+    return 0xC0000000 | (length << 16) | (ord("H") << 8) | 0x06
+
+
+def find_hidraw():
+    for path in sorted(glob.glob("/sys/class/hidraw/hidraw*")):
+        uevent = os.path.join(path, "device", "uevent")
+        try:
+            with open(uevent) as f:
+                content = f.read().upper()
+            if f"0000{VENDOR}" in content:
+                return os.path.join("/dev", os.path.basename(path))
+        except OSError:
+            continue
+    return None
+
+
+def find_touchpad_event():
+    for path in sorted(glob.glob("/sys/class/input/event*/device/name")):
+        try:
+            with open(path) as f:
+                name = f.read().strip().upper()
+            if VENDOR in name and "TOUCHPAD" in name:
+                event = path.split("/")[-3]
+                return os.path.join("/dev/input", event)
+        except OSError:
+            continue
+    return None
+
+
+def main():
+    hidraw = find_hidraw()
+    if not hidraw:
+        print("No Synaptics haptic touchpad hidraw device found", file=sys.stderr)
+        sys.exit(1)
+
+    event = find_touchpad_event()
+    if not event:
+        print("No Synaptics haptic touchpad input device found", file=sys.stderr)
+        sys.exit(1)
+
+    print(f"Haptic touchpad: hidraw={hidraw} input={event} intensity={INTENSITY}", flush=True)
+
+    haptic_report = struct.pack("BB", REPORT_ID, INTENSITY)
+    ioctl_req = HIDIOCSFEATURE(len(haptic_report))
+
+    hidraw_fd = os.open(hidraw, os.O_RDWR)
+    event_fd = os.open(event, os.O_RDONLY)
+
+    try:
+        while True:
+            data = os.read(event_fd, EVENT_SIZE)
+            if len(data) < EVENT_SIZE:
+                continue
+            _, _, ev_type, code, value = struct.unpack(EVENT_FORMAT, data)
+            if ev_type == EV_KEY and code in (BTN_LEFT, BTN_RIGHT, BTN_MIDDLE) and value == 1:
+                try:
+                    fcntl.ioctl(hidraw_fd, ioctl_req, haptic_report)
+                except OSError:
+                    pass
+    except KeyboardInterrupt:
+        pass
+    finally:
+        os.close(event_fd)
+        os.close(hidraw_fd)
+
+
+if __name__ == "__main__":
+    main()

bin/omarchy-hibernation-available

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# Check if hibernation is supported
+# omarchy:summary=Check if hibernation is supported
+
 if [[ ! -f /sys/power/image_size ]]; then
   exit 1
 fi

bin/omarchy-hibernation-remove

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# Removes hibernation setup: disables swap, removes swapfile, removes fstab entry,
-# removes resume hook, and removes suspend-then-hibernate configuration.
+# omarchy:summary=Remove hibernation setup including swap and boot resume settings
+# omarchy:requires-sudo=true
 
 MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
 

bin/omarchy-hibernation-setup

@@ -1,27 +1,52 @@
 #!/bin/bash
 
-# Creates a swap file in the btrfs subvolume, adds the swap file to /etc/fstab,
-# adds a resume hook to mkinitcpio, and configures suspend-then-hibernate.
+# omarchy:summary=Set up hibernation with swap and boot resume configuration
+# omarchy:requires-sudo=true
+# omarchy:args=[--force] [--no-rebuild]
+
+FORCE=false
+NO_REBUILD=false
+for arg in "$@"; do
+  case "$arg" in
+    --force) FORCE=true ;;
+    --no-rebuild) NO_REBUILD=true ;;
+  esac
+done
 
 if [[ ! -f /sys/power/image_size ]]; then
   echo -e "Hibernation is not supported on your system" >&2
   exit 0
 fi
 
-if ! command -v limine-mkinitcpio &>/dev/null; then
+# When --no-rebuild is set, the caller is responsible for the UKI rebuild
+# (e.g. running before limine-mkinitcpio-hook is installed during initial
+# install), so we only require limine-mkinitcpio when we'd invoke it ourselves.
+if ! $NO_REBUILD && ! command -v limine-mkinitcpio &>/dev/null; then
   echo "Skipping hibernation setup (requires Limine bootloader)"
   exit 0
 fi
 
 MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
+SWAP_FILE="/swap/swapfile"
+RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
 
 # Check if hibernation is already configured
 if [[ -f $MKINITCPIO_CONF ]] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
+  # Fix empty resume_offset if btrfs map-swapfile failed during initial setup
+  if [[ -f $RESUME_DROP_IN ]] && grep -q 'resume_offset="$' "$RESUME_DROP_IN" && [[ -f $SWAP_FILE ]]; then
+    RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE" 2>/dev/null)
+    if [[ -n $RESUME_OFFSET ]]; then
+      echo "Fixing empty resume_offset ($RESUME_OFFSET)"
+      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" "$RESUME_DROP_IN"
+      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" /etc/default/limine
+      $NO_REBUILD || sudo limine-mkinitcpio
+    fi
+  fi
   echo "Hibernation is already set up"
   exit 0
 fi
 
-if [[ $1 != "--force" ]]; then
+if ! $FORCE; then
   MEM_TOTAL_HUMAN=$(free --human | awk '/Mem/ {print $2}')
   if ! gum confirm "Use $MEM_TOTAL_HUMAN on boot drive to make hibernation available?"; then
     exit 0
@@ -29,7 +54,6 @@ if [[ $1 != "--force" ]]; then
 fi
 
 SWAP_SUBVOLUME="/swap"
-SWAP_FILE="$SWAP_SUBVOLUME/swapfile"
 
 # Create btrfs subvolume for swap
 if ! sudo btrfs subvolume show "$SWAP_SUBVOLUME" &>/dev/null; then
@@ -68,14 +92,18 @@ sudo cp -p "$OMARCHY_PATH/default/systemd/system-sleep/keyboard-backlight" /usr/
 
 # Add resume= kernel parameters so the initramfs resume hook knows where to find the
 # hibernation image. Without these, resume happens late (after GPU drivers load) and fails.
-RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
 if [[ ! -f $RESUME_DROP_IN ]]; then
   echo "Adding resume kernel parameters"
   sudo swapon -p 0 "$SWAP_FILE" 2>/dev/null
   RESUME_DEVICE=$(findmnt -no SOURCE -T "$SWAP_FILE" | sed 's/\[.*\]//')
-  RESUME_OFFSET=$(btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
-  sudo mkdir -p /etc/limine-entry-tool.d
-  echo "KERNEL_CMDLINE[default]+=\"resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+  RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
+  if [[ -n $RESUME_OFFSET ]]; then
+    sudo mkdir -p /etc/limine-entry-tool.d
+    echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+    sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
+  else
+    echo "Warning: Could not determine resume offset for $SWAP_FILE" >&2
+  fi
 fi
 
 # Use ACPI alarm for RTC wakeup on s2idle systems (needed for suspend-then-hibernate)
@@ -84,17 +112,21 @@ if grep -q "\[s2idle\]" /sys/power/mem_sleep 2>/dev/null; then
   if [[ ! -f $LIMINE_DROP_IN ]]; then
     echo "Enabling ACPI RTC alarm for s2idle suspend"
     sudo mkdir -p /etc/limine-entry-tool.d
-    echo 'KERNEL_CMDLINE[default]+="rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
+    echo 'KERNEL_CMDLINE[default]+=" rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
+    sudo tee -a /etc/default/limine < "$LIMINE_DROP_IN" >/dev/null
   fi
 fi
 
-# Regenerate initramfs and boot entry
-echo "Regenerating initramfs..."
-sudo limine-mkinitcpio
-sudo limine-update
+if ! $NO_REBUILD; then
+  # limine-mkinitcpio rebuilds initramfs/UKI for all kernels and updates the
+  # /boot/limine.conf entries via limine-entry-tool. The limine bootloader
+  # binary on the ESP doesn't change here, so we don't need limine-update
+  # (which would also re-deploy the binary and rebuild a second time).
+  echo "Regenerating initramfs..."
+  sudo limine-mkinitcpio
+  echo
+fi
 
-echo
-
-if [[ $1 != "--force" ]] && gum confirm "Reboot to enable hibernation?"; then
+if ! $FORCE && ! $NO_REBUILD && gum confirm "Reboot to enable hibernation?"; then
   omarchy-system-reboot
 fi

bin/omarchy-hook

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# Run a named hook, like post-update (available in ~/.config/omarchy/hooks/post-update).
+# omarchy:summary=Run a named hook, like post-update (available in ~/.config/omarchy/hooks/post-update).
+# omarchy:args=[name] [args...]
 
 set -e
 

bin/omarchy-hw-asus-expertbook-b9406

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# omarchy:summary=Detect ASUS ExpertBook B9406 series laptops on Intel Panther Lake.
+
+omarchy-hw-match "B9406" && omarchy-hw-intel-ptl

bin/omarchy-hw-asus-rog

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Detect whether the computer is an Asus ROG machine.
+# omarchy:summary=Detect whether the computer is an Asus ROG machine.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "ASUSTeK COMPUTER INC." ]] &&
    grep -q "ROG" /sys/class/dmi/id/product_family 2>/dev/null

bin/omarchy-hw-dell-xps-oled

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# omarchy:summary=Match Dell XPS systems with LG OLED panel on Intel Panther Lake (Xe3) GPU.
+
+omarchy-hw-match "XPS" \
+  && omarchy-hw-intel-ptl \
+  && test "$(od -An -tx1 -j8 -N2 /sys/class/drm/card*-eDP-*/edid 2>/dev/null | tr -d ' \n')" = "30e4"

bin/omarchy-hw-external-monitors

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# omarchy:summary=Returns true when an external monitor is physically connected.
+
+for status in /sys/class/drm/card*-*/status; do
+  [[ "$status" == *-eDP-*/status ]] && continue
+  [[ "$(<"$status")" == "connected" ]] && exit 0
+done
+exit 1

bin/omarchy-hw-framework16

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Detect whether the computer is a Framework Laptop 16.
+# omarchy:summary=Detect whether the computer is a Framework Laptop 16.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Framework" ]] &&
-  grep -q "Laptop 16" /sys/class/dmi/id/product_name 2>/dev/null
+  omarchy-hw-match "Laptop 16"

bin/omarchy-hw-hybrid-gpu

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# omarchy:summary=Detect whether the system has an active hybrid GPU configuration
+
+if command -v supergfxctl &>/dev/null; then
+  supergfxctl -s 2>/dev/null | grep -qw Hybrid
+else
+  (($(lspci | grep -cE 'VGA|3D|Display') >= 2))
+fi

bin/omarchy-hw-intel

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# omarchy:summary=Detect whether the computer has an Intel CPU.
+
+[[ $(grep -m1 "vendor_id" /proc/cpuinfo 2>/dev/null | cut -d: -f2 | tr -d ' ') == "GenuineIntel" ]]

bin/omarchy-hw-intel-ptl

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# omarchy:summary=Detect whether the computer has an Intel Panther Lake GPU.
+
+lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'

bin/omarchy-hw-match

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# omarchy:summary=Match against the computer's DMI product name or product family (case-insensitive).
+# omarchy:args=<pattern>
+
+grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null ||
+grep -qi "$1" /sys/class/dmi/id/product_family 2>/dev/null

bin/omarchy-hw-nvidia-gsp

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# omarchy:summary=Detect whether the computer has an NVIDIA GPU with GSP firmware (Turing or newer).
+
+# GTX 16xx, RTX 20xx-50xx, RTX Pro, Quadro RTX, datacenter A/H/T/L series.
+lspci | grep -i 'nvidia' | grep -qE "GTX 16[0-9]{2}|RTX [2-5][0-9]{3}|RTX PRO [0-9]{4}|Quadro RTX|RTX A[0-9]{4}|A[1-9][0-9]{2}|H[1-9][0-9]{2}|T4|L[0-9]+"

bin/omarchy-hw-nvidia-without-gsp

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# omarchy:summary=Detect whether the computer has an NVIDIA GPU without GSP firmware (Maxwell/Pascal/Volta).
+
+# GTX 9xx/10xx, GT 10xx, Quadro P/M/GV, MX series, Titan X/Xp/V, Tesla V100.
+lspci | grep -i 'nvidia' | grep -qE "GTX (9[0-9]{2}|10[0-9]{2})|GT 10[0-9]{2}|Quadro [PM][0-9]{3,4}|Quadro GV100|MX *[0-9]+|Titan (X|Xp|V)|Tesla V100"

bin/omarchy-hw-recover-internal-monitor

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# omarchy:summary=Clear the internal-monitor-disable toggle if no external display is connected.
+
+TOGGLE="$HOME/.local/state/omarchy/toggles/hypr/internal-monitor-disable.conf"
+
+if [[ -f $TOGGLE ]] && ! omarchy-hw-external-monitors; then
+  rm -f "$TOGGLE"
+fi

bin/omarchy-hw-surface

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Detect whether the computer is a Microsoft Surface device.
+# omarchy:summary=Detect whether the computer is a Microsoft Surface device.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Microsoft Corporation" ]] &&
-  grep -q "Surface" /sys/class/dmi/id/product_name 2>/dev/null
+  omarchy-hw-match "Surface"

bin/omarchy-hw-touchpad

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# omarchy:summary=Print the detected Hyprland touchpad or trackpad device name
+
+device=$(hyprctl devices -j | jq -r '[.mice[] | .name | select(test("touchpad|trackpad"; "i"))] | first // empty')
+[[ -n $device ]] && echo "$device"

bin/omarchy-hw-touchscreen

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# omarchy:summary=Print the detected Hyprland touchscreen or tablet device name
+
+device=$(hyprctl devices -j | jq -r '[.touch[]?.name, .tablets[]?.name] | first // empty')
+[[ -n $device ]] && echo "$device"

bin/omarchy-hw-vulkan

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# omarchy:summary=Detect whether Vulkan is available.
+
+[[ -d /usr/share/vulkan/icd.d ]] &&
+  find /usr/share/vulkan/icd.d -maxdepth 1 -name "*.json" -print -quit | grep -q .

bin/omarchy-hyprland-active-window-transparency-toggle

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# omarchy:summary=Toggles transparency for the currently focused window.
+
+hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle

bin/omarchy-hyprland-monitor-focused

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# omarchy:summary=Print the name of the currently focused Hyprland monitor.
+
+hyprctl monitors -j | jq -r '.[] | select(.focused == true).name'

bin/omarchy-hyprland-monitor-focused-apple

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# omarchy:summary=Return success if the focused Hyprland monitor is an Apple display.
+
+hyprctl monitors -j | jq -e '.[] | select(.focused == true) | select(.make == "Apple Computer Inc" and (.model | test("StudioDisplay|ProDisplayXDR")))' >/dev/null

bin/omarchy-hyprland-monitor-internal

@@ -0,0 +1,46 @@
+#!/bin/bash
+
+# omarchy:summary=Enable, disable, toggle, or recover the internal laptop display
+# omarchy:args=<on|off|toggle|recover>
+
+TOGGLE="internal-monitor-disable"
+TOGGLE_FLAG="$HOME/.local/state/omarchy/toggles/hypr/$TOGGLE.conf"
+MIRROR_TOGGLE="internal-monitor-mirror"
+
+# Get internal monitor name dynamically
+INTERNAL=$(hyprctl monitors -j | jq -r '.[] | select(.name | contains("eDP")).name' | head -n 1)
+
+enable() {
+  if omarchy-hyprland-toggle-enabled "$TOGGLE"; then
+    omarchy-hyprland-toggle --disabled-notification "󰍹    Laptop display enabled" "$TOGGLE"
+  fi
+}
+
+disable() {
+  if ! omarchy-hw-external-monitors; then
+    notify-send -u low "󰍹    Can't disable the only active display"
+    exit 1
+  fi
+  if omarchy-hyprland-toggle-disabled "$TOGGLE" && omarchy-hyprland-toggle-disabled "$MIRROR_TOGGLE"; then
+    echo "monitor=$INTERNAL,disable" >"$TOGGLE_FLAG"
+    notify-send -u low "󰍹    Laptop display disabled"
+    hyprctl reload
+  fi
+}
+
+recover() {
+  if ! omarchy-hw-external-monitors && omarchy-hyprland-toggle-enabled "$TOGGLE"; then
+    omarchy-hyprland-toggle "$TOGGLE"
+  fi
+}
+
+case "$1" in
+  on) enable ;;
+  off) disable ;;
+  toggle) if omarchy-hyprland-toggle-enabled "$TOGGLE"; then enable; else disable; fi ;;
+  recover) recover ;;
+  *)
+    echo "Usage: $(basename "$0") {on|off|toggle|recover}" >&2
+    exit 1
+    ;;
+esac

bin/omarchy-hyprland-monitor-internal-mirror

@@ -0,0 +1,58 @@
+#!/bin/bash
+
+# omarchy:summary=Enable, disable, toggle, or recover mirroring the internal display to an external monitor
+# omarchy:args=<on|off|toggle|recover>
+
+TOGGLE="internal-monitor-mirror"
+TOGGLE_FLAG="$HOME/.local/state/omarchy/toggles/hypr/$TOGGLE.conf"
+DISABLE_TOGGLE="internal-monitor-disable"
+
+# Get names dynamically
+INTERNAL=$(hyprctl monitors -j | jq -r '.[] | select(.name | contains("eDP")).name' | head -n 1)
+# Get the first available external monitor
+EXTERNAL=$(hyprctl monitors -j | jq -r '.[] | select(.name | contains("eDP") | not).name' | head -n 1)
+
+enable() {
+  if [[ -z "$EXTERNAL" ]]; then
+    notify-send -u low "󰍹    No external monitors found for mirror"
+    exit 1
+  fi
+
+  if [[ -z "$INTERNAL" ]]; then
+    notify-send -u low "󰍹    No laptop monitor found to mirror"
+    exit 1
+  fi
+
+  if omarchy-hyprland-toggle-enabled "$DISABLE_TOGGLE"; then
+    omarchy-hyprland-toggle "$DISABLE_TOGGLE"
+  fi
+
+  if omarchy-hyprland-toggle-disabled "$TOGGLE"; then
+    echo "monitor=$EXTERNAL, preferred, auto, 1, mirror, $INTERNAL" > "$TOGGLE_FLAG"
+    notify-send -u low "󰍹    Mirroring enabled ($EXTERNAL)"
+    hyprctl reload
+  fi
+}
+
+disable() {
+  if omarchy-hyprland-toggle-enabled "$TOGGLE"; then
+    omarchy-hyprland-toggle --disabled-notification "󰍹    Extended mode restored" "$TOGGLE"
+  fi
+}
+
+recover() {
+  if ! omarchy-hw-external-monitors && omarchy-hyprland-toggle-enabled "$TOGGLE"; then
+    omarchy-hyprland-toggle "$TOGGLE"
+  fi
+}
+
+case "$1" in
+  on) enable ;;
+  off) disable ;;
+  toggle) if omarchy-hyprland-toggle-enabled "$TOGGLE"; then disable; else enable; fi ;;
+  recover) recover ;;
+  *)
+    echo "Usage: $(basename "$0") {on|off|toggle|recover}" >&2
+    exit 1
+    ;;
+esac

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -1,21 +1,47 @@
 #!/bin/bash
 
-# Get the active monitor (the one with the cursor)
+# omarchy:summary=Cycle scaling for the focused Hyprland monitor
+
 MONITOR_INFO=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)')
 ACTIVE_MONITOR=$(echo "$MONITOR_INFO" | jq -r '.name')
 CURRENT_SCALE=$(echo "$MONITOR_INFO" | jq -r '.scale')
+WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
+HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
+REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
 
-# Cycle through scales: 1 → 1.6 → 2 → 3 → 1
-CURRENT_INT=$(awk -v s="$CURRENT_SCALE" 'BEGIN { printf "%.0f", s * 10 }')
+# Cycle through scales: 1 → 1.25 → 1.6 → 2 → 3 → 1 (or reverse with --reverse)
+SCALES=(1 1.25 1.6 2 3)
 
-case "$CURRENT_INT" in
-10) NEW_SCALE=1.6 ;;
-16) NEW_SCALE=2 ;;
-20) NEW_SCALE=3 ;;
-*) NEW_SCALE=1 ;;
-esac
+# Find the index of the scale closest to the current one (Hyprland may
+# snap fractional scales to nearby values, so we can't match exactly)
+CURRENT_IDX=$(awk -v s="$CURRENT_SCALE" -v list="${SCALES[*]}" 'BEGIN {
+  n = split(list, arr, " ")
+  best = 0; best_diff = 1e9
+  for (i = 1; i <= n; i++) {
+    d = s - arr[i]; if (d < 0) d = -d
+    if (d < best_diff) { best_diff = d; best = i - 1 }
+  }
+  print best
+}')
 
-hyprctl keyword misc:disable_scale_notification true
-hyprctl keyword monitor "$ACTIVE_MONITOR,preferred,auto,$NEW_SCALE"
-hyprctl keyword misc:disable_scale_notification false
-notify-send "󰍹    Display scaling set to ${NEW_SCALE}x"
+if [[ "$1" == "--reverse" ]]; then
+  NEW_IDX=$(( (CURRENT_IDX - 1 + ${#SCALES[@]}) % ${#SCALES[@]} ))
+else
+  NEW_IDX=$(( (CURRENT_IDX + 1) % ${#SCALES[@]} ))
+fi
+
+NEW_SCALE=${SCALES[$NEW_IDX]}
+
+hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
+
+# Persist to monitors.conf if the user has a single generic catch-all line
+# (ignoring disabled monitors), so the scale survives reboots.
+MONITOR_CONF="$HOME/.config/hypr/monitors.conf"
+if [[ -f $MONITOR_CONF ]]; then
+  mapfile -t ACTIVE_LINES < <(grep -E '^[[:space:]]*monitor=' "$MONITOR_CONF" | grep -vE 'disable[[:space:]]*$')
+  if [[ ${#ACTIVE_LINES[@]} -eq 1 ]] && [[ "${ACTIVE_LINES[0]}" =~ ^monitor=,preferred,auto, ]]; then
+    sed -i -E "s|^(monitor=,preferred,auto,).*|\\1${NEW_SCALE}|" "$MONITOR_CONF"
+  fi
+fi
+
+notify-send -u low "󰍹    Display scaling set to ${NEW_SCALE}x"

bin/omarchy-hyprland-monitor-watch

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+# omarchy:summary=Watch Hyprland monitor events and recover monitor toggles when a monitor is removed
+
+SOCKET="$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock"
+
+socat -U - "UNIX-CONNECT:$SOCKET" | while read -r event; do
+  case "$event" in
+    monitorremoved\>\>*|monitorremovedv2\>\>*)
+      omarchy-hyprland-monitor-internal recover
+      omarchy-hyprland-monitor-internal-mirror recover
+      ;;
+  esac
+done

bin/omarchy-hyprland-toggle

@@ -0,0 +1,32 @@
+#!/bin/bash
+
+# omarchy:summary=Toggle permanent Hyprland flags by copying them into a directory that's sourced entirely.
+# omarchy:args=[--enabled-notification <text>] [--disabled-notification <text>] <flag-name>
+
+ENABLED_NOTIFICATION=""
+DISABLED_NOTIFICATION=""
+
+while [[ $# -gt 1 ]]; do
+  case $1 in
+    --enabled-notification) ENABLED_NOTIFICATION="$2"; shift 2 ;;
+    --disabled-notification) DISABLED_NOTIFICATION="$2"; shift 2 ;;
+    *) break ;;
+  esac
+done
+
+FLAG_NAME="$1"
+FLAG="$HOME/.local/state/omarchy/toggles/hypr/$FLAG_NAME.conf"
+FLAG_SOURCE="$OMARCHY_PATH/default/hypr/toggles/$FLAG_NAME.conf"
+
+if [[ -f $FLAG ]]; then
+  rm $FLAG
+  [[ -n $DISABLED_NOTIFICATION ]] && notify-send -u low "$DISABLED_NOTIFICATION"
+elif [[ -f $FLAG_SOURCE ]]; then
+  cp $FLAG_SOURCE $FLAG
+  [[ -n $ENABLED_NOTIFICATION ]] && notify-send -u low "$ENABLED_NOTIFICATION"
+else
+  echo "Flag not found: $FLAG_NAME"
+  exit 1
+fi
+
+hyprctl reload

bin/omarchy-hyprland-toggle-disabled

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# omarchy:summary=Check if a Hyprland toggle is currently disabled (missing).
+# omarchy:args=<flag-name>
+
+[[ ! -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-toggle-enabled

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# omarchy:summary=Check if a Hyprland toggle is currently enabled.
+# omarchy:args=<flag-name>
+
+[[ -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-window-close-all

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# Close all open windows
+# omarchy:summary=Close all open windows
+
 hyprctl clients -j | \
   jq -r ".[].address" | \
   xargs -I{} hyprctl dispatch closewindow address:{}

bin/omarchy-hyprland-window-gaps-toggle

@@ -1,15 +1,5 @@
 #!/bin/bash
 
-# Toggles the window gaps globally between no gaps and the default 10/5/2.
+# omarchy:summary=Toggles the window gaps globally between no gaps and the default.
 
-gaps=$(hyprctl getoption general:gaps_out -j | jq -r '.custom' | awk '{print $1}')
-
-if [[ $gaps == "0" ]]; then
-  hyprctl keyword general:gaps_out 10
-  hyprctl keyword general:gaps_in 5
-  hyprctl keyword general:border_size 2
-else
-  hyprctl keyword general:gaps_out 0
-  hyprctl keyword general:gaps_in 0
-  hyprctl keyword general:border_size 0
-fi
+omarchy-hyprland-toggle window-no-gaps

bin/omarchy-hyprland-window-pop

@@ -1,19 +1,7 @@
 #!/bin/bash
 
-# Toggle to pop-out a tile to stay fixed on a display basis.
-
-# Usage:
-# omarchy-hyprland-window-pop [width height [x y]]
-#
-# Arguments:
-#   width   Optional. Width of the floating window. Default: 1300
-#   height  Optional. Height of the floating window. Default: 900
-#   x       Optional. X position of the window. Must provide both X and Y to take effect.
-#   y       Optional. Y position of the window. Must provide both X and Y to take effect.
-#
-# Behavior:
-#   - If the window is already pinned, it will be unpinned and removed from the pop layer.
-#   - If the window is not pinned, it will be floated, resized, moved/centered, pinned, brought to top, and popped.
+# omarchy:summary=Toggle to pop-out a tile to stay fixed on a display basis.
+# omarchy:args=[width height x y]
 
 width=${1:-1300}
 height=${2:-900}

bin/omarchy-hyprland-window-single-square-aspect-toggle

@@ -1,13 +1,8 @@
 #!/bin/bash
 
-# Check current single_window_aspect_ratio setting
-CURRENT_VALUE=$(hyprctl getoption "layout:single_window_aspect_ratio" 2>/dev/null | head -1)
+# omarchy:summary=Toggle single-window square aspect ratio.
 
-# Parse vec2 output: "vec2: [1, 1]" or "vec2: [0, 0]"
-if [[ $CURRENT_VALUE == *"[1, 1]"* ]]; then
-  hyprctl keyword layout:single_window_aspect_ratio "0 0"
-  notify-send "    Disable single-window square aspect ratio"
-else
-  hyprctl keyword layout:single_window_aspect_ratio "1 1"
-  notify-send "    Enable single-window square aspect"
-fi
+omarchy-hyprland-toggle \
+  --enabled-notification "      Enable single-window square aspect ratio" \
+  --disabled-notification "      Disable single-window square aspect ratio" \
+  single-window-aspect-ratio

bin/omarchy-hyprland-workspace-layout-toggle

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Toggle the layout on the current active workspace between dwindle and scrolling
+# omarchy:summary=Toggle the layout on the current active workspace between dwindle and scrolling
 
 ACTIVE_WORKSPACE=$(hyprctl activeworkspace -j | jq -r '.id')
 CURRENT_LAYOUT=$(hyprctl activeworkspace -j | jq -r '.tiledLayout')
@@ -11,4 +11,4 @@ case "$CURRENT_LAYOUT" in
 esac
 
 hyprctl keyword workspace $ACTIVE_WORKSPACE, layout:$NEW_LAYOUT
-notify-send "󱂬    Workspace layout set to $NEW_LAYOUT"
+notify-send -u low "󱂬    Workspace layout set to $NEW_LAYOUT"

bin/omarchy-install-chromium-google-account

@@ -1,9 +1,9 @@
 #!/bin/bash
 
-# Allow Chromium to sign in to Google accounts by adding the correct
-# oauth client id and secret to ~/.config/chromium-flags.conf.
+# omarchy:summary=Allow Chromium to sign in to Google accounts by adding the required OAuth credentials
 
 if [[ -f ~/.config/chromium-flags.conf ]]; then
+  echo "Installing Chromium Google account support..."
   CONF=~/.config/chromium-flags.conf
 
   grep -qxF -- "--oauth2-client-id=77185425430.apps.googleusercontent.com" "$CONF" ||

bin/omarchy-install-dev-env

@@ -1,6 +1,10 @@
 #!/bin/bash
 
-# Install one of the supported development environments. Usually called via Install > Development > * in the Omarchy Menu.
+# omarchy:summary=Install a supported development environment
+# omarchy:name=dev-env
+# omarchy:args=<ruby|node|bun|deno|go|laravel|symfony|php|python|elixir|phoenix|rust|java|zig|ocaml|dotnet|clojure|scala>
+# omarchy:examples=omarchy install dev-env ruby | omarchy install dev-env node
+# omarchy:requires-sudo=true
 
 if [[ -z $1 ]]; then
   echo "Usage: omarchy-install-dev-env <ruby|node|bun|deno|go|laravel|symfony|php|python|elixir|phoenix|rust|java|zig|ocaml|dotnet|clojure|scala>" >&2
@@ -50,9 +54,9 @@ case "$1" in
 ruby)
   echo -e "Installing Ruby on Rails...\n"
   omarchy-pkg-add libyaml
-  mise use --global ruby@latest
-  mise settings add idiomatic_version_file_enable_tools ruby
   mise settings add ruby.compile false
+  mise settings add idiomatic_version_file_enable_tools ruby
+  mise use --global ruby@latest
   echo "gem: --no-document" >~/.gemrc
   mise x ruby -- gem install rails --no-document
   echo -e "\nYou can now run: rails new myproject"

bin/omarchy-install-docker-dbs

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# Install one of the supported databases in a Docker container with the suitable development options.
-# Usually called via Install > Development > Docker DB from the Omarchy Menu.
+# omarchy:summary=Install one of the supported databases in a Docker container with the suitable development options.
+# omarchy:requires-sudo=true
 
 options=("MySQL" "PostgreSQL" "Redis" "MongoDB" "MariaDB" "MSSQL")
 
@@ -13,6 +13,7 @@ fi
 
 if [[ -n $choices ]]; then
   for db in $choices; do
+    echo "Installing $db..."
     case $db in
     MySQL) sudo docker run -d --restart unless-stopped -p "127.0.0.1:3306:3306" --name=mysql8 -e MYSQL_ROOT_PASSWORD= -e MYSQL_ALLOW_EMPTY_PASSWORD=true mysql:8.4 ;;
     PostgreSQL) sudo docker run -d --restart unless-stopped -p "127.0.0.1:5432:5432" --name=postgres18 -e POSTGRES_HOST_AUTH_METHOD=trust postgres:18 ;;

bin/omarchy-install-dropbox

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Install and start the Dropbox service. Must then be authenticated via the web.
+# omarchy:summary=Install and start the Dropbox service. Must then be authenticated via the web.
 
 echo "Installing all dependencies..."
 omarchy-pkg-add dropbox dropbox-cli libappindicator-gtk3 python-gpgme nautilus-dropbox

bin/omarchy-install-gaming-geforce-now

@@ -1,9 +1,10 @@
 #!/bin/bash
 
-# Install and launch Geforce Now.
+# omarchy:summary=Install and launch Geforce Now.
 
 set -e
 
+echo "Installing GeForce NOW..."
 omarchy-pkg-add flatpak
 cd /tmp
 

bin/omarchy-install-gaming-gpu-lib32

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+# omarchy:summary=Install lib32 graphics drivers (Vulkan + NVIDIA) for any detected GPUs.
+# omarchy:requires-sudo=true
+
+set -e
+
+echo "Installing lib32 graphics drivers..."
+
+PACKAGES=()
+
+declare -A VULKAN_DRIVERS=(
+  [Intel]=lib32-vulkan-intel
+  [AMD]=lib32-vulkan-radeon
+)
+for vendor in "${!VULKAN_DRIVERS[@]}"; do
+  if lspci | grep -iE "(VGA|Display).*$vendor" >/dev/null; then
+    PACKAGES+=("${VULKAN_DRIVERS[$vendor]}")
+  fi
+done
+
+if omarchy-hw-nvidia-gsp; then
+  PACKAGES+=(lib32-nvidia-utils)
+elif omarchy-hw-nvidia-without-gsp; then
+  PACKAGES+=(lib32-nvidia-580xx-utils)
+fi
+
+[[ ${#PACKAGES[@]} -gt 0 ]] && omarchy-pkg-add "${PACKAGES[@]}"

bin/omarchy-install-gaming-heroic

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+# omarchy:summary=Install Heroic Games Launcher (Epic, GOG, Amazon Prime Gaming) with graphics drivers.
+# omarchy:requires-sudo=true
+
+set -e
+
+echo "Installing Heroic Games Launcher..."
+omarchy-pkg-add heroic-games-launcher-bin
+omarchy-install-gaming-gpu-lib32
+
+setsid gtk-launch heroic >/dev/null 2>&1 &

bin/omarchy-install-gaming-lutris

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+# omarchy:summary=Install Lutris with Wine + DXVK for running Windows games (Battle.net, EA, Ubisoft Connect, etc.)
+# omarchy:requires-sudo=true
+
+set -e
+
+echo "Installing Lutris..."
+omarchy-pkg-add lutris umu-launcher wine-staging wine-mono wine-gecko winetricks python-protobuf
+omarchy-install-gaming-gpu-lib32
+
+# Lutris ships with `#!/usr/bin/env python3`, which resolves to mise's Python and
+# fails to import the lutris module. Pin the shebang to the system Python.
+sudo sed -i '/env python3/ c\#!/bin/python3' /usr/bin/lutris
+
+cat <<'EOF'
+
+Lutris will open and auto-fetch its DXVK and VKD3D runtimes in the background
+(watch the bottom status bar). Once that finishes, click the + to add or install games.
+
+EOF
+
+setsid lutris >/dev/null 2>&1 &

bin/omarchy-install-gaming-moonlight

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+# omarchy:summary=Install Moonlight (NVIDIA GameStream / Sunshine client) for streaming games to this PC.
+# omarchy:requires-sudo=true
+
+set -e
+
+echo "Installing Moonlight..."
+omarchy-pkg-add moonlight-qt
+
+setsid gtk-launch com.moonlight_stream.Moonlight.desktop >/dev/null 2>&1 &

bin/omarchy-install-gaming-retroarch

@@ -0,0 +1,82 @@
+#!/bin/bash
+
+# omarchy:summary=Install RetroArch with the full libretro core set plus FBNeo and a ~/Games ROM directory.
+
+set -e
+
+echo "Installing RetroArch..."
+omarchy-pkg-add \
+  retroarch \
+  retroarch-assets-glui retroarch-assets-ozone retroarch-assets-xmb \
+  libretro-beetle-pce libretro-beetle-pce-fast libretro-beetle-psx libretro-beetle-psx-hw libretro-beetle-supergrafx \
+  libretro-blastem \
+  libretro-bsnes libretro-bsnes-hd libretro-bsnes2014 \
+  libretro-core-info \
+  libretro-desmume libretro-dolphin libretro-flycast \
+  libretro-gambatte libretro-genesis-plus-gx \
+  libretro-kronos \
+  libretro-mame libretro-mame2016 libretro-melonds libretro-mesen libretro-mesen-s libretro-mgba libretro-mupen64plus-next \
+  libretro-nestopia \
+  libretro-overlays \
+  libretro-parallel-n64 libretro-picodrive libretro-play libretro-ppsspp \
+  libretro-sameboy libretro-scummvm libretro-shaders-slang libretro-snes9x \
+  libretro-yabause \
+  libretro-fbneo-git \
+  libretro-database-git \
+  retroarch-joypad-autoconfig-git
+
+# Set up ~/Games for BIOS files and ROMs
+mkdir -p "$HOME/Games/bios" "$HOME/Games/roms"
+
+CFG="$HOME/.config/retroarch/retroarch.cfg"
+mkdir -p "$(dirname "$CFG")"
+touch "$CFG"
+
+set_cfg() {
+  local key=$1 value=$2
+  if grep -q "^$key = " "$CFG"; then
+    sed -i "s|^$key = .*|$key = \"$value\"|" "$CFG"
+  else
+    echo "$key = \"$value\"" >>"$CFG"
+  fi
+}
+
+set_cfg rgui_browser_directory "$HOME/Games/roms"
+set_cfg system_directory "$HOME/Games/bios"
+
+# Point at the cores and assets installed by pacman
+set_cfg libretro_directory "/usr/lib/libretro"
+set_cfg libretro_info_path "/usr/share/libretro/info"
+set_cfg overlay_directory "/usr/share/libretro/overlays"
+set_cfg osk_overlay_directory "/usr/share/libretro/overlays/keyboards"
+set_cfg video_shader_dir "/usr/share/libretro/shaders/shaders_slang"
+set_cfg joypad_autoconfig_dir "/usr/share/libretro/autoconfig"
+
+# Point at the database, cheats, and cursors from libretro-database-git
+set_cfg content_database_path "/usr/share/libretro/database/rdb"
+set_cfg cheat_database_path "/usr/share/libretro/database/cht"
+set_cfg cursor_directory "/usr/share/libretro/database/cursors"
+
+# Vulkan is required for slang shaders and unlocks hardware renderers in beetle-psx-hw, parallel-n64, dolphin
+set_cfg video_driver "vulkan"
+
+# XMB is the classic PS3-style menu (vs. ozone/rgui/glui)
+set_cfg menu_driver "xmb"
+
+# Default to crt-royale shader for that classic CRT look. The global preset is
+# auto-loaded by RetroArch when auto_shaders_enable is true and no per-core/per-game
+# preset takes precedence — setting video_shader alone in retroarch.cfg is not enough.
+set_cfg video_shader_enable "true"
+set_cfg auto_shaders_enable "true"
+mkdir -p ~/.config/retroarch/config
+echo '#reference "/usr/share/libretro/shaders/shaders_slang/crt/crt-royale.slangp"' \
+  > ~/.config/retroarch/config/global.slangp
+
+# Hide Images and Video tabs in the main menu sidebar
+set_cfg content_show_images "false"
+set_cfg content_show_video "false"
+
+echo ""
+echo "Put your roms and bios files in ~/Games. Then start RetroArch from the app launcher (Super + Space)."
+
+setsid nautilus "$HOME/Games" >/dev/null 2>&1 &

bin/omarchy-install-gaming-steam

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+# omarchy:summary=Install Steam and graphics drivers selected for this system
+# omarchy:requires-sudo=true
+
+set -e
+
+echo "Installing Steam..."
+omarchy-pkg-add steam
+omarchy-install-gaming-gpu-lib32
+
+echo ""
+echo "Steam will start automatically now. This might take a while..."
+
+setsid gtk-launch steam >/dev/null 2>&1 &

bin/omarchy-install-gaming-xbox-cloud

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# omarchy:summary=Install Xbox Cloud Gaming as a web app and launch it.
+
+set -e
+
+echo "Installing Xbox Cloud Gaming..."
+omarchy-webapp-install "Xbox Cloud Gaming" "https://www.xbox.com/en-US/play" "https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/xbox.png"
+
+setsid omarchy-launch-webapp "https://www.xbox.com/en-US/play" >/dev/null 2>&1 &

bin/omarchy-install-gaming-xbox-controllers

@@ -0,0 +1,37 @@
+#!/bin/bash
+
+# omarchy:summary=Install support for using Xbox controllers with Steam/RetroArch/etc.
+# omarchy:requires-sudo=true
+
+set -e
+
+echo "Installing Xbox controller Bluetooth support..."
+
+# Install xpadneo to ensure controllers work out of the box
+omarchy-pkg-add linux-headers xpadneo-dkms
+
+# Prevent xpad/xpadneo driver conflict
+echo blacklist xpad | sudo tee /etc/modprobe.d/blacklist-xpad.conf >/dev/null
+echo hid_xpadneo | sudo tee /etc/modules-load.d/xpadneo.conf >/dev/null
+
+# Ensure user is in the input group (controllers need it)
+needs_reboot=false
+if ! id -nG "$USER" | grep -qw input; then
+  sudo usermod -aG input "$USER"
+  needs_reboot=true
+fi
+
+# Swap drivers in the running kernel so a reboot isn't needed otherwise
+if lsmod | grep -q '^xpad '; then
+  sudo modprobe -r xpad 2>/dev/null || needs_reboot=true
+fi
+
+if $needs_reboot; then
+  gum confirm "Reboot needed to finish setup. Reboot now?" && sudo reboot now
+  exit 0
+fi
+
+sudo modprobe hid_xpadneo
+
+echo ""
+echo "Now you can pair your Xbox controller with Bluetooth using Super + Ctrl + B."

bin/omarchy-install-helix

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+# omarchy:summary=Install Helix and configure it to use the current Omarchy theme
+
+echo "Installing Helix..."
+omarchy-pkg-add helix
+
+mkdir -p ~/.config/helix/themes
+
+# Symlink the rendered Omarchy theme so Helix tracks the active theme
+ln -sf ~/.config/omarchy/current/theme/helix.toml ~/.config/helix/themes/omarchy.toml
+
+# Only seed a config.toml if the user does not already have one
+if [[ ! -f ~/.config/helix/config.toml ]]; then
+  cat >~/.config/helix/config.toml <<'EOF'
+theme = "omarchy"
+EOF
+fi
+
+# Ensure the symlink target exists for users whose current theme predates this template
+if [[ ! -e ~/.config/omarchy/current/theme/helix.toml ]]; then
+  omarchy-theme-refresh
+fi
+
+# Arch-based distros ship Helix as 'helix' rather than the upstream 'hx'.
+if ! grep -q '^alias hx="helix"' ~/.bashrc 2>/dev/null; then
+  echo 'alias hx="helix"' >>~/.bashrc
+fi

bin/omarchy-install-nordvpn

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# Install the NordVPN service with optional GUI.
+# omarchy:summary=Install the NordVPN service with optional GUI.
+# omarchy:requires-sudo=true
 
 echo "Installing NordVPN..."
 omarchy-pkg-aur-add nordvpn-bin
@@ -14,4 +15,4 @@ sudo usermod -aG nordvpn "$USER"
 echo -e "\nNordVPN installed! After reboot, run 'nordvpn login' to authenticate."
 
 echo
-gum confirm "Reboot now to make NordVPN usable?" && sudo reboot now
+gum confirm "Reboot now to make NordVPN usable?" && omarchy-system-reboot

bin/omarchy-install-once

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+# omarchy:summary=Install the ONCE service, enable its background service, and launch the TUI.
+# omarchy:requires-sudo=true
+
+echo "Installing ONCE..."
+omarchy-pkg-add once-bin
+
+echo "Enabling ONCE background service..."
+sudo systemctl enable --now once-background.service
+
+echo -e "\nLaunching ONCE..."
+once

bin/omarchy-install-steam

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Install and launch Steam after first letting the user pick the correct grahics card drivers.
-
-set -e
-
-echo "Now pick dependencies matching your graphics card"
-sudo pacman -S steam
-setsid gtk-launch steam >/dev/null 2>&1 &

bin/omarchy-install-tailscale

@@ -1,10 +1,13 @@
 #!/bin/bash
 
-# Install the Tailscale mesh VPN service and a web app for the Tailscale Admin Console.
+# omarchy:summary=Install the Tailscale mesh VPN service and a web app for the Tailscale Admin Console.
+# omarchy:requires-sudo=true
 
-curl -fsSL https://tailscale.com/install.sh | sh
+echo -e "\nInstalling Tailscale..."
+omarchy-pkg-add tailscale
 
 echo -e "\nStarting Tailscale..."
+sudo systemctl enable --now tailscaled.service
 sudo tailscale up --accept-routes
 
 omarchy-webapp-install "Tailscale" "https://login.tailscale.com/admin/machines" https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png

bin/omarchy-install-terminal

@@ -1,6 +1,8 @@
 #!/bin/bash
 
-# Install one of the approved terminals and set it as the default for Omarchy (Super + Return etc).
+# omarchy:summary=Install one of the approved terminals and set it as the default for Omarchy (Super + Return etc).
+# omarchy:args=<alacritty|ghostty|kitty>
+# omarchy:requires-sudo=true
 
 if (($# == 0)); then
   echo "Usage: omarchy-install-terminal [alacritty|ghostty|kitty]"
@@ -20,6 +22,8 @@ kitty) desktop_id="kitty.desktop" ;;
   ;;
 esac
 
+echo "Installing $package..."
+
 # Install package
 if omarchy-pkg-add $package; then
   # Copy custom desktop entry for alacritty with X-TerminalArg* keys

bin/omarchy-install-vscode

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Install VSCode and configure it to use the gnome-libsecret password store, not to update automatically, and to use the current Omarchy theme.
+# omarchy:summary=Install VS Code and configure Omarchy defaults for secrets, updates, and theme
 
 echo "Installing VSCode..."
 omarchy-pkg-add visual-studio-code-bin

bin/omarchy-install-xbox-controllers

@@ -1,19 +0,0 @@
-#!/bin/bash
-
-# Install support for using Xbox controllers with Steam/RetroArch/etc.
-
-set -e
-
-# Install xpadneo to ensure controllers work out of the box
-omarchy-pkg-add linux-headers
-omarchy-pkg-aur-add xpadneo-dkms
-
-# Prevent xpad/xpadneo driver conflict
-echo blacklist xpad | sudo tee /etc/modprobe.d/blacklist-xpad.conf >/dev/null
-echo hid_xpadneo | sudo tee /etc/modules-load.d/xpadneo.conf >/dev/null
-
-# Give user access to game controllers
-sudo usermod -a -G input $USER
-
-# Modules need to be loaded
-gum confirm "Install requires reboot. Ready?" && sudo reboot now

bin/omarchy-launch-about

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-# Launch the fastfetch TUI that gives information about the current system.
+# omarchy:summary=Launch the fastfetch TUI that gives information about the current system.
 
 exec omarchy-launch-or-focus-tui "bash -c 'fastfetch; read -n 1 -s'"

bin/omarchy-launch-audio

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-# Launch the Omarchy audio controls TUI (provided by wiremix).
+# omarchy:summary=Launch the Omarchy audio controls TUI (provided by wiremix).
 
 omarchy-launch-or-focus-tui wiremix

bin/omarchy-launch-bluetooth

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# Launch the Omarchy bluetooth controls TUI (provided by bluetui).
-# Also attempts to unblock bluetooth service if rfkill had blocked it.
+# omarchy:summary=Launch the Omarchy bluetooth controls TUI (provided by bluetui).
 
 rfkill unblock bluetooth
 exec omarchy-launch-or-focus-tui bluetui

bin/omarchy-launch-browser

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# Launch the default browser as determined by xdg-settings.
-# Automatically converts --private into the correct flag for the given browser.
+# omarchy:summary=Launch the default browser as determined by xdg-settings.
+# omarchy:args=[url]
 
 default_browser=$(xdg-settings get default-web-browser)
 browser_exec=$(sed -n 's/^Exec=\([^ ]*\).*/\1/p' {~/.local,~/.nix-profile,/usr}/share/applications/$default_browser 2>/dev/null | head -1)

bin/omarchy-launch-editor

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# Launch the default editor as determined by $EDITOR (set via ~/.config/uwsm/default) (or nvim if missing).
-# Starts suitable editors in a terminal window and otherwise as a regular application.
+# omarchy:summary=Launch the default editor as determined by $EDITOR (set via ~/.config/uwsm/default) (or nvim if missing).
+# omarchy:args=<path>
 
 omarchy-cmd-present "$EDITOR" || EDITOR=nvim