Ensure Linux kernel is running preempt=full to avoid audio/linux jitter under load

AGENTS.md

@@ -1,67 +0,0 @@
-# Style
-
-- Two spaces for indentation, no tabs
-- Use bash 5 conditionals: use `[[ ]]` for string/file tests and `(( ))` for numeric tests
-- In `[[ ]]`, don't quote variables, but do quote string literals when comparing values (e.g., `[[ $branch == "dev" ]]`)
-- Prefer `(( ))` over numeric operators inside `[[ ]]` (e.g., `(( count < 50 ))`, not `[[ $count -lt 50 ]]`)
-- For strings/paths with spaces, quote them instead of escaping spaces with `\ ` (e.g., `"$APP_DIR/Disk Usage.desktop"`, not `$APP_DIR/Disk\ Usage.desktop`)
-- Shebangs must use `#!/bin/bash` consistently (never `#!/usr/bin/env bash`)
-
-# Command Naming
-
-All commands start with `omarchy-`. Prefixes indicate purpose:
-
-- `cmd-` - check if commands exist, misc utility commands
-- `pkg-` - package management helpers
-- `hw-` - hardware detection (return exit codes for use in conditionals)
-- `refresh-` - copy default config to user's `~/.config/`
-- `restart-` - restart a component
-- `launch-` - open applications
-- `install-` - install optional software
-- `setup-` - interactive setup wizards
-- `toggle-` - toggle features on/off
-- `theme-` - theme management
-- `update-` - update components
-
-# Helper Commands
-
-Use these instead of raw shell commands:
-
-- `omarchy-cmd-missing` / `omarchy-cmd-present` - check for commands
-- `omarchy-pkg-missing` / `omarchy-pkg-present` - check for packages
-- `omarchy-pkg-add` - install packages (handles both pacman and AUR)
-- `omarchy-hw-asus-rog` - detect ASUS ROG hardware (and similar `hw-*` commands)
-
-# Config Structure
-
-- `config/` - default configs copied to `~/.config/`
-- `default/themed/*.tpl` - templates with `{{ variable }}` placeholders for theme colors
-- `themes/*/colors.toml` - theme color definitions (accent, background, foreground, color0-15)
-
-# Refresh Pattern
-
-To copy a default config to user config with automatic backup:
-
-```bash
-omarchy-refresh-config hypr/hyprlock.conf
-```
-
-This copies `~/.local/share/omarchy/config/hypr/hyprlock.conf` to `~/.config/hypr/hyprlock.conf`.
-
-# Migrations
-
-To create a new migration, run `omarchy-dev-add-migration --no-edit`. This creates a migration file named after the unix timestamp of the last commit.
-
-Migration format:
-- No shebang line
-- Start with an `echo` describing what the migration does
-- Use `$OMARCHY_PATH` to reference the omarchy directory
-
-Example:
-```bash
-echo "Disable fingerprint in hyprlock if fingerprint auth is not configured"
-
-if omarchy-cmd-missing fprintd-list || ! fprintd-list "$USER" 2>/dev/null | grep -q "finger"; then
-  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = false/' ~/.config/hypr/hyprlock.conf
-fi
-```

applications/hidden/limine-snapper-restore.desktop

@@ -1,2 +0,0 @@
-[Desktop Entry]
-Hidden=true

applications/hidden/wiremix.desktop

@@ -1,2 +0,0 @@
-[Desktop Entry]
-Hidden=true

bin/omarchy-ac-present

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Returns true if AC power is connected.
-
-for ac in /sys/class/power_supply/AC* /sys/class/power_supply/ADP*; do
-  [[ -r $ac/online && $(cat "$ac/online") == "1" ]] && exit 0
-done
-
-exit 1

bin/omarchy-battery-capacity

@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# Returns the battery full capacity in Wh (rounded to whole number).
-# Used by omarchy-battery-status for displaying battery capacity.
-
-battery_info=$(upower -i $(upower -e | grep BAT))
-
-echo "$battery_info" | awk '/energy-full:/ {
-    printf "%d", $2
-    exit
-}'

bin/omarchy-battery-monitor

@@ -9,11 +9,10 @@ BATTERY_STATE=$(upower -i $(upower -e | grep 'BAT') | grep -E "state" | awk '{pr
 
 send_notification() {
   notify-send -u critical "󱐋 Time to recharge!" "Battery is down to ${1}%" -i battery-caution -t 30000
-  omarchy-hook battery-low "$1"
 }
 
-if [[ -n $BATTERY_LEVEL && $BATTERY_LEVEL =~ ^[0-9]+$ ]]; then
-  if [[ $BATTERY_STATE == "discharging" ]] && (( BATTERY_LEVEL <= BATTERY_THRESHOLD )); then
+if [[ -n "$BATTERY_LEVEL" && "$BATTERY_LEVEL" =~ ^[0-9]+$ ]]; then
+  if [[ $BATTERY_STATE == "discharging" && $BATTERY_LEVEL -le $BATTERY_THRESHOLD ]]; then
     if [[ ! -f $NOTIFICATION_FLAG ]]; then
       send_notification $BATTERY_LEVEL
       touch $NOTIFICATION_FLAG

bin/omarchy-battery-present

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-# Returns true if a battery is present on the system.
-# Used by the battery monitor and other battery-related checks.
-
-for bat in /sys/class/power_supply/BAT*; do
-  [[ -r $bat/present ]] &&
-  [[ $(cat $bat/present) == "1" ]] &&
-  [[ $(cat $bat/type) == "Battery" ]] &&
-  exit 0
-done
-
-exit 1

bin/omarchy-battery-remaining

@@ -1,9 +1,11 @@
 #!/bin/bash
 
 # Returns the battery percentage remaining as an integer.
-# Used by the battery monitor and the Ctrl + Shift + Super + B hotkey.
 
-upower -i $(upower -e | grep BAT) | awk '/percentage/ { 
-    print int($2)
+upower -i $(upower -e | grep BAT) \
+| awk -F: '/percentage/ {
+    gsub(/[%[:space:]]/, "", $2);
+    val=$2;
+    printf("%d\n", (val+0.5))
     exit
-}'
+  }'

bin/omarchy-battery-remaining-time

@@ -1,22 +0,0 @@
-#!/bin/bash
-
-# Returns the battery time remaining (to empty or full) in a compact format.
-
-battery_info=$(upower -i $(upower -e | grep BAT))
-
-echo "$battery_info" | awk '/time to (empty|full)/ {
-    value = $4
-    unit = $5
-    if (unit ~ /^minute/) {
-        printf "%dm", int(value)
-    } else {
-        hours = int(value)
-        minutes = int((value - hours) * 60)
-        if (minutes > 0) {
-            printf "%dh %dm", hours, minutes
-        } else {
-            printf "%dh", hours
-        }
-    }
-    exit
-}'

bin/omarchy-battery-status

@@ -1,28 +0,0 @@
-#!/bin/bash
-
-# Returns a formatted battery status string with percentage and power draw/charge.
-# Used by the battery notification hotkey (Ctrl + Shift + Super + B).
-
-battery_info=$(upower -i $(upower -e | grep BAT))
-
-percentage=$(echo "$battery_info" | awk '/percentage/ {
-    print int($2)
-    exit
-}')
-
-power_rate=$(echo "$battery_info" | awk '/energy-rate/ {
-    rounded = sprintf("%.1f", $2)
-    sub(/\.0$/, "", rounded)
-    print rounded
-    exit
-}')
-
-state=$(echo "$battery_info" | awk '/state/ { print $2; exit }')
-time_remaining=$(omarchy-battery-remaining-time)
-capacity=$(omarchy-battery-capacity)
-
-if [[ $state == "charging" ]]; then
-    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} to full  ·   ${power_rate}W / ${capacity}Wh"
-else
-    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} left  ·   ${power_rate}W / ${capacity}Wh"
-fi

bin/omarchy-branch-set

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-# Set the branch for Omarchy's git repository.
-
-if (($# == 0)); then
-  echo "Usage: omarchy-branch-set [master|rc|dev]"
-  exit 1
-else
-  branch="$1"
-fi
-
-if [[ $branch != "master" && $branch != "rc" && $branch != "dev" ]]; then
-  echo "Error: Invalid branch '$branch'. Must be one of: master, rc, dev"
-  exit 1
-fi
-
-git -C $OMARCHY_PATH switch $branch

bin/omarchy-brightness-display

@@ -1,21 +0,0 @@
-#!/bin/bash
-
-# Adjust brightness on the most likely display device.
-# Usage: omarchy-brightness-display <step>
-
-step="${1:-+5%}"
-
-# Start with the first possible output, then refine to the most likely given an order heuristic.
-device="$(ls -1 /sys/class/backlight 2>/dev/null | head -n1)"
-for candidate in amdgpu_bl* intel_backlight acpi_video*; do
-  if [[ -e /sys/class/backlight/$candidate ]]; then
-    device="$candidate"
-    break
-  fi
-done
-
-# Set the actual brightness of the display device.
-brightnessctl -d "$device" set "$step" >/dev/null
-
-# Use SwayOSD to display the new brightness setting.
-omarchy-swayosd-brightness "$(brightnessctl -d "$device" -m | cut -d',' -f4 | tr -d '%')"

bin/omarchy-brightness-display-apple

@@ -1,12 +0,0 @@
-#!/bin/bash
-
-# Adjust the brightness on Apple Studio Displays and Apple XDR Displays using asdcontrol.
-
-if (( $# == 0 )); then
-  echo "Adjust Apple Display Brightness by passing +5000 or -5000 (or any range from 0-60000)"
-else
-  device="$(sudo asdcontrol --detect /dev/usb/hiddev* | grep ^/dev/usb/hiddev | cut -d: -f1)"
-  sudo asdcontrol "$device" -- "$1" >/dev/null
-  value="$(sudo asdcontrol "$device" | awk -F= '/BRIGHTNESS=/{print $2+0}')"
-  omarchy-swayosd-brightness "$(( value * 100 / 60000 ))"
-fi

bin/omarchy-brightness-keyboard

@@ -1,47 +0,0 @@
-#!/bin/bash
-
-# Adjust keyboard backlight brightness using available steps.
-# Usage: omarchy-brightness-keyboard <up|down|cycle>
-
-direction="${1:-up}"
-
-# Find keyboard backlight device (look for *kbd_backlight* pattern in leds class).
-device=""
-for candidate in /sys/class/leds/*kbd_backlight*; do
-  if [[ -e $candidate ]]; then
-    device="$(basename "$candidate")"
-    break
-  fi
-done
-
-if [[ -z $device ]]; then
-  echo "No keyboard backlight device found" >&2
-  exit 1
-fi
-
-# Get current and max brightness to determine step size.
-max_brightness="$(brightnessctl -d "$device" max)"
-current_brightness="$(brightnessctl -d "$device" get)"
-
-# Calculate step as 10% of max brightness. Keyboards with many levels (e.g. 512)
-# need larger steps; keyboards with few levels (e.g. 3) fall back to step=1.
-step=$(( max_brightness / 10 ))
-(( step < 1 )) && step=1
-
-if [[ $direction == "cycle" ]]; then
-  new_brightness=$(( current_brightness + step ))
-  (( new_brightness > max_brightness )) && new_brightness=0
-elif [[ $direction == "up" ]]; then
-  new_brightness=$(( current_brightness + step ))
-  (( new_brightness > max_brightness )) && new_brightness=$max_brightness
-else
-  new_brightness=$(( current_brightness - step ))
-  (( new_brightness < 0 )) && new_brightness=0
-fi
-
-# Set the new brightness.
-brightnessctl -d "$device" set "$new_brightness" >/dev/null
-
-# Use SwayOSD to display the new brightness setting.
-percent=$((new_brightness * 100 / max_brightness))
-omarchy-swayosd-kbd-brightness "$percent"

bin/omarchy-channel-set

@@ -1,31 +0,0 @@
-#!/bin/bash
-
-# Set the Omarchy channel, which dictates what git branch and package repository is used.
-#
-# Stable uses the master branch, which only sees updates on official releases, and
-# the stable package repository, which typically lags the edge by a month to ensure
-# better compatibility.
-#
-# Edge tracks the latest package repository, but still relies on the master branch,
-# so new packages which require config changes may cause conflicts or errors.
-#
-# Dev tracks the active development dev branch, which may include partial or broken updates,
-# as well as the latest package repository. This should only be used by Omarchy developers
-# and people with a lot of experience managing Linux systems.
-
-if (($# == 0)); then
-  echo "Usage: omarchy-channel-set [stable|rc|edge|dev]"
-  exit 1
-else
-  channel="$1"
-fi
-
-case "$channel" in
-"stable") omarchy-branch-set "master" && omarchy-refresh-pacman "stable" ;;
-"rc") omarchy-branch-set "rc" && omarchy-refresh-pacman "rc" ;;
-"edge") omarchy-branch-set "master" && omarchy-refresh-pacman "edge" ;;
-"dev") omarchy-branch-set "dev" && omarchy-refresh-pacman "edge" ;;
-*) echo "Unknown channel: $channel"; exit 1; ;;
-esac
-
-omarchy-update -y

bin/omarchy-cmd-apple-display-brightness

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+if [[ $# -eq 0 ]]; then
+  echo "Adjust Apple Display Brightness by passing +5000 or -5000 (or any range from 0-60000)"
+else
+  DEVICE="$(sudo asdcontrol --detect /dev/usb/hiddev* | grep ^/dev/usb/hiddev | cut -d: -f1)"
+  sudo asdcontrol "$DEVICE" -- "$1" >/dev/null
+  VALUE="$(sudo asdcontrol "$DEVICE" | awk -F= '/BRIGHTNESS=/{print $2+0}')"
+  swayosd-client \
+    --monitor "$(hyprctl monitors -j | jq -r '.[]|select(.focused==true).name')" \
+    --custom-icon display-brightness \
+    --custom-progress "$(awk -v v="$VALUE" 'BEGIN{printf "%.2f", v/60000}')" \
+    --custom-progress-text "$(( VALUE * 100 / 60000 ))%"
+fi

bin/omarchy-cmd-audio-switch

@@ -1,19 +1,21 @@
 #!/bin/bash
 
-# Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.
+focused_monitor="$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"
 
 sinks=$(pactl -f json list sinks | jq '[.[] | select((.ports | length == 0) or ([.ports[]? | .availability != "not available"] | any))]')
 sinks_count=$(echo "$sinks" | jq '. | length')
 
-if (( sinks_count == 0 )); then
-  omarchy-swayosd-client --custom-message "No audio devices found"
+if [ "$sinks_count" -eq 0 ]; then
+  swayosd-client \
+    --monitor "$focused_monitor" \
+    --custom-message "No audio devices found"
   exit 1
 fi
 
 current_sink_name=$(pactl get-default-sink)
 current_sink_index=$(echo "$sinks" | jq -r --arg name "$current_sink_name" 'map(.name) | index($name)')
 
-if [[ $current_sink_index != "null" ]]; then
+if [ "$current_sink_index" != "null" ]; then
   next_sink_index=$(((current_sink_index + 1) % sinks_count))
 else
   next_sink_index=0
@@ -23,28 +25,20 @@ next_sink=$(echo "$sinks" | jq -r ".[$next_sink_index]")
 next_sink_name=$(echo "$next_sink" | jq -r '.name')
 
 next_sink_description=$(echo "$next_sink" | jq -r '.description')
-if [[ $next_sink_description == "(null)" ]] || [[ $next_sink_description == "null" ]] || [[ -z $next_sink_description ]]; then
-  # For Bluetooth devices, the friendly name is on the Device entry (device.id), not the Sink entry (object.id)
-  device_id=$(echo "$next_sink" | jq -r '.properties."device.id"')
-  if [[ $device_id != "null" ]] && [[ -n $device_id ]]; then
-    next_sink_description=$(wpctl status | grep -E "^\s*│?\s+${device_id}\." | sed -E 's/^.*[0-9]+\.\s+//' | sed -E 's/\s+\[.*$//')
-  fi
-  # Fall back to object.id lookup if device.id didn't yield a result
-  if [[ -z $next_sink_description ]]; then
-    sink_id=$(echo "$next_sink" | jq -r '.properties."object.id"')
-    next_sink_description=$(wpctl status | grep -E "\s+\*?\s+${sink_id}\." | sed -E 's/^.*[0-9]+\.\s+//' | sed -E 's/\s+\[.*$//')
-  fi
+if [ "$next_sink_description" = "(null)" ] || [ "$next_sink_description" = "null" ] || [ -z "$next_sink_description" ]; then
+  sink_id=$(echo "$next_sink" | jq -r '.properties."object.id"')
+  next_sink_description=$(wpctl status | grep -E "\s+\*?\s+${sink_id}\." | sed -E 's/^.*[0-9]+\.\s+//' | sed -E 's/\s+\[.*$//')
 fi
 
 next_sink_volume=$(echo "$next_sink" | jq -r \
   '.volume | to_entries[0].value.value_percent | sub("%"; "")')
 next_sink_is_muted=$(echo "$next_sink" | jq -r '.mute')
 
-if [[ $next_sink_is_muted = "true" ]] || (( next_sink_volume == 0 )); then
+if [ "$next_sink_is_muted" = "true" ] || [ "$next_sink_volume" -eq 0 ]; then
   icon_state="muted"
-elif (( next_sink_volume <= 33 )); then
+elif [ "$next_sink_volume" -le 33 ]; then
   icon_state="low"
-elif (( next_sink_volume <= 66 )); then
+elif [ "$next_sink_volume" -le 66 ]; then
   icon_state="medium"
 else
   icon_state="high"
@@ -52,11 +46,11 @@ fi
 
 next_sink_volume_icon="sink-volume-${icon_state}-symbolic"
 
-if [[ $next_sink_name != $current_sink_name ]]; then
-  next_sink_wpid=$(echo "$next_sink" | jq -r '.properties."object.id"')
-  wpctl set-default "$next_sink_wpid"
+if [ "$next_sink_name" != "$current_sink_name" ]; then
+  pactl set-default-sink "$next_sink_name"
 fi
 
-omarchy-swayosd-client \
+swayosd-client \
+  --monitor "$focused_monitor" \
   --custom-message "$next_sink_description" \
   --custom-icon "$next_sink_volume_icon"

bin/omarchy-cmd-first-run

@@ -1,21 +1,17 @@
 #!/bin/bash
 
-# Finish the installation of Omarchy with items that can only be done after logging in.
-
 set -e
 
 FIRST_RUN_MODE=~/.local/state/omarchy/first-run.mode
 
-if [[ -f $FIRST_RUN_MODE ]]; then
+if [[ -f "$FIRST_RUN_MODE" ]]; then
   rm -f "$FIRST_RUN_MODE"
 
   bash "$OMARCHY_PATH/install/first-run/battery-monitor.sh"
-  bash "$OMARCHY_PATH/install/first-run/recover-internal-monitor.sh"
   bash "$OMARCHY_PATH/install/first-run/cleanup-reboot-sudoers.sh"
   bash "$OMARCHY_PATH/install/first-run/firewall.sh"
   bash "$OMARCHY_PATH/install/first-run/dns-resolver.sh"
   bash "$OMARCHY_PATH/install/first-run/gnome-theme.sh"
-  bash "$OMARCHY_PATH/install/first-run/elephant.sh"
   sudo rm -f /etc/sudoers.d/first-run
 
   bash "$OMARCHY_PATH/install/first-run/welcome.sh"

bin/omarchy-cmd-mic-mute

@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# Toggle microphone mute. Dell XPS and ThinkPad systems get special handling for the hardware LED.
-
-if omarchy-hw-match "XPS"; then
-  omarchy-cmd-mic-mute-xps
-elif omarchy-hw-match "ThinkPad"; then
-  omarchy-cmd-mic-mute-thinkpad
-else
-  omarchy-swayosd-client --input-volume mute-toggle
-fi

bin/omarchy-cmd-mic-mute-thinkpad

@@ -1,23 +0,0 @@
-#!/bin/bash
-
-# Toggle microphone mute on ThinkPad systems. Uses wpctl for reliable toggling
-# and syncs the platform::micmute LED via brightnessctl.
-
-wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
-
-if pactl get-source-mute @DEFAULT_SOURCE@ | grep -q 'yes'; then
-  osd_message='Microphone muted'
-  osd_icon='microphone-sensitivity-muted-symbolic'
-  led_value=1
-else
-  osd_message='Microphone on'
-  osd_icon='audio-input-microphone-symbolic'
-  led_value=0
-fi
-
-brightnessctl --device="platform::micmute" set "$led_value" >/dev/null 2>&1 || true
-
-swayosd-client \
-  --monitor "$(omarchy-hyprland-monitor-focused)" \
-  --custom-message "$osd_message" \
-  --custom-icon "$osd_icon"

bin/omarchy-cmd-mic-mute-xps

@@ -1,43 +0,0 @@
-#!/bin/bash
-
-# Toggle microphone mute on Dell XPS systems. Uses wpctl for reliable toggling
-# and syncs the ALSA capture switch so the hardware mic mute LED follows state.
-
-wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
-
-if pactl get-source-mute @DEFAULT_SOURCE@ | rg -q 'yes'; then
-  alsa_value='off,off'
-  osd_message='Microphone muted'
-  osd_icon='microphone-sensitivity-muted-symbolic'
-else
-  alsa_value='on,on'
-  osd_message='Microphone on'
-  osd_icon='audio-input-microphone-symbolic'
-fi
-
-if [[ -e /sys/class/leds/platform::micmute/brightness ]]; then
-  default_source=$(pactl get-default-source)
-  alsa_card=$(pactl -f json list sources | jq -r --arg source "$default_source" '
-    .[] | select(.name == $source) |
-    .properties["alsa.card"] // .properties["api.alsa.card"] // .properties["api.alsa.pcm.card"] // empty
-  ' | head -1)
-
-  if [[ -n $alsa_card ]]; then
-    cards=("$alsa_card")
-  else
-    mapfile -t cards < <(compgen -G '/proc/asound/card*' | rg -o 'card[0-9]+' | sed 's/card//' | sort -u)
-  fi
-
-  for card in "${cards[@]}"; do
-    while IFS= read -r control; do
-      if [[ $control != *"Jack Microphone"* ]]; then
-        amixer -c "$card" cset "$control" "$alsa_value" >/dev/null 2>&1 || true
-        break 2
-      fi
-    done < <(amixer -c "$card" controls 2>/dev/null | rg -o "name='[^']*Microphone Capture Switch'")
-  done
-fi
-
-omarchy-swayosd-client \
-  --custom-message "$osd_message" \
-  --custom-icon "$osd_icon"

bin/omarchy-cmd-missing

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-# Returns true if any of the commands passed in as arguments are missing on the system.
-
 for cmd in "$@"; do
   if ! command -v "$cmd" &>/dev/null; then
     exit 0

bin/omarchy-cmd-present

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-# Returns true if all the commands passed in as arguments exit on the system.
-
 for cmd in "$@"; do
   command -v "$cmd" &>/dev/null || exit 1
 done

bin/omarchy-cmd-screenrecord

@@ -1,49 +1,32 @@
 #!/bin/bash
 
-# Start and stop a screenrecording, which will be saved to ~/Videos by default.
-# Alternative location can be set via OMARCHY_SCREENRECORD_DIR or XDG_VIDEOS_DIR ENVs.
-# Resolution is capped to 4K for monitors above 4K, native otherwise.
-# Override via --resolution= (e.g. --resolution=1920x1080, --resolution=0x0 for native).
-
 [[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
 OUTPUT_DIR="${OMARCHY_SCREENRECORD_DIR:-${XDG_VIDEOS_DIR:-$HOME/Videos}}"
 
-if [[ ! -d $OUTPUT_DIR ]]; then
+if [[ ! -d "$OUTPUT_DIR" ]]; then
   notify-send "Screen recording directory does not exist: $OUTPUT_DIR" -u critical -t 3000
   exit 1
 fi
 
-DESKTOP_AUDIO="false"
-MICROPHONE_AUDIO="false"
+SCOPE=""
+AUDIO="false"
 WEBCAM="false"
-WEBCAM_DEVICE=""
-RESOLUTION=""
-STOP_RECORDING="false"
-RECORDING_FILE="/tmp/omarchy-screenrecord-filename"
 
 for arg in "$@"; do
   case "$arg" in
-  --with-desktop-audio) DESKTOP_AUDIO="true" ;;
-  --with-microphone-audio) MICROPHONE_AUDIO="true" ;;
-  --with-webcam) WEBCAM="true" ;;
-  --webcam-device=*) WEBCAM_DEVICE="${arg#*=}" ;;
-  --resolution=*) RESOLUTION="${arg#*=}" ;;
-  --stop-recording) STOP_RECORDING="true" ;;
+    --with-audio) AUDIO="true" ;;
+    --with-webcam) WEBCAM="true" ;;
+    output|region) SCOPE="$arg" ;;
   esac
 done
 
+cleanup_webcam() {
+  pkill -f "WebcamOverlay" 2>/dev/null
+}
+
 start_webcam_overlay() {
   cleanup_webcam
 
-  # Auto-detect first available webcam if none specified
-  if [[ -z $WEBCAM_DEVICE ]]; then
-    WEBCAM_DEVICE=$(v4l2-ctl --list-devices 2>/dev/null | grep -m1 "^[[:space:]]*/dev/video" | tr -d '\t')
-    if [[ -z $WEBCAM_DEVICE ]]; then
-      notify-send "No webcam devices found" -u critical -t 3000
-      return 1
-    fi
-  fi
-
   # Get monitor scale
   local scale=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .scale')
 
@@ -53,7 +36,7 @@ start_webcam_overlay() {
   # Try preferred 16:9 resolutions in order, use first available
   local preferred_resolutions=("640x360" "1280x720" "1920x1080")
   local video_size_arg=""
-  local available_formats=$(v4l2-ctl --list-formats-ext -d "$WEBCAM_DEVICE" 2>/dev/null)
+  local available_formats=$(v4l2-ctl --list-formats-ext -d /dev/video0 2>/dev/null)
 
   for resolution in "${preferred_resolutions[@]}"; do
     if echo "$available_formats" | grep -q "$resolution"; then
@@ -62,8 +45,8 @@ start_webcam_overlay() {
     fi
   done
 
-  ffplay -f v4l2 $video_size_arg -framerate 30 "$WEBCAM_DEVICE" \
-    -vf "crop=iw/2:ih,scale=${target_width}:-1" \
+  ffplay -f v4l2 $video_size_arg -framerate 30 /dev/video0 \
+    -vf "scale=${target_width}:-1" \
     -window_title "WebcamOverlay" \
     -noborder \
     -fflags nobuffer -flags low_delay \
@@ -72,83 +55,36 @@ start_webcam_overlay() {
   sleep 1
 }
 
-cleanup_webcam() {
-  pkill -f "WebcamOverlay" 2>/dev/null
-}
-
-default_resolution() {
-  local width height
-  read -r width height < <(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | "\(.width) \(.height)"')
-  if ((width > 3840 || height > 2160)); then
-    echo "3840x2160"
-  else
-    echo "0x0"
-  fi
-}
-
 start_screenrecording() {
   local filename="$OUTPUT_DIR/screenrecording-$(date +'%Y-%m-%d_%H-%M-%S').mp4"
-  local audio_devices=""
-  local audio_args=()
+  local audio_args=""
 
-  [[ $DESKTOP_AUDIO == "true" ]] && audio_devices+="default_output"
+  # Merge audio tracks into one - separate tracks only play one at a time in most players
+  [[ "$AUDIO" == "true" ]] && audio_args="-a default_output|default_input"
 
-  if [[ $MICROPHONE_AUDIO == "true" ]]; then
-    # Merge audio tracks into one - separate tracks only play one at a time in most players
-    [[ -n $audio_devices ]] && audio_devices+="|"
-    audio_devices+="default_input"
-  fi
-
-  [[ -n $audio_devices ]] && audio_args+=(-a "$audio_devices" -ac aac)
-
-  local resolution="${RESOLUTION:-$(default_resolution)}"
-
-  gpu-screen-recorder -w portal -k auto -s "$resolution" -f 60 -fm cfr -fallback-cpu-encoding yes -o "$filename" "${audio_args[@]}" &
-  local pid=$!
-
-  # Wait for recording to actually start (file appears after portal selection)
-  while kill -0 $pid 2>/dev/null && [[ ! -f $filename ]]; do
-    sleep 0.2
-  done
-
-  if kill -0 $pid 2>/dev/null; then
-    echo "$filename" >"$RECORDING_FILE"
-    toggle_screenrecording_indicator
-  fi
+  gpu-screen-recorder -w "$@" -f 60 -c mp4 $audio_args -ac aac -o "$filename" &
+  toggle_screenrecording_indicator
 }
 
 stop_screenrecording() {
-  pkill -SIGINT -f "^gpu-screen-recorder" # SIGINT required to save video properly
+  pkill -SIGINT -f "gpu-screen-recorder"  # SIGINT required to save video properly
 
   # Wait a maximum of 5 seconds to finish before hard killing
   local count=0
-  while pgrep -f "^gpu-screen-recorder" >/dev/null && ((count < 50)); do
+  while pgrep -f "gpu-screen-recorder" >/dev/null && [ $count -lt 50 ]; do
     sleep 0.1
     count=$((count + 1))
   done
 
-  toggle_screenrecording_indicator
-  cleanup_webcam
-
-  if pgrep -f "^gpu-screen-recorder" >/dev/null; then
-    pkill -9 -f "^gpu-screen-recorder"
+  if pgrep -f "gpu-screen-recorder" >/dev/null; then
+    pkill -9 -f "gpu-screen-recorder"
+    cleanup_webcam
     notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
   else
-    finalize_recording
-    local filename=$(cat "$RECORDING_FILE" 2>/dev/null)
-    local preview="${filename%.mp4}-preview.png"
-
-    # Generate a preview thumbnail from the first frame
-    ffmpeg -y -i "$filename" -ss 00:00:00.1 -vframes 1 -q:v 2 "$preview" -loglevel quiet 2>/dev/null
-
-    (
-      ACTION=$(notify-send "Screen recording saved" "Open with Super + Alt + , (or click this)" -t 10000 -i "${preview:-$filename}" -A "default=open")
-      [[ $ACTION == "default" ]] && mpv "$filename"
-      rm -f "$preview"
-    ) &
+    cleanup_webcam
+    notify-send "Screen recording saved to $OUTPUT_DIR" -t 2000
   fi
-
-  rm -f "$RECORDING_FILE"
+  toggle_screenrecording_indicator
 }
 
 toggle_screenrecording_indicator() {
@@ -156,36 +92,51 @@ toggle_screenrecording_indicator() {
 }
 
 screenrecording_active() {
-  pgrep -f "^gpu-screen-recorder" >/dev/null
-}
-
-finalize_recording() {
-  local latest
-  latest=$(cat "$RECORDING_FILE" 2>/dev/null)
-  [[ -f $latest ]] || return
-
-  # Trim the first frame, and normalize audio to -14 LUFS if present, in a single pass
-  local args=(-y -ss 0.1 -i "$latest")
-  if ffprobe -v error -select_streams a -show_entries stream=codec_type -of csv=p=0 "$latest" 2>/dev/null | grep -q audio; then
-    args+=(-af loudnorm=I=-14:TP=-1.5:LRA=11 -c:v copy)
-  else
-    args+=(-c copy)
-  fi
-
-  local processed="${latest%.mp4}-processed.mp4"
-  if ffmpeg "${args[@]}" "$processed" -loglevel quiet 2>/dev/null; then
-    mv "$processed" "$latest"
-  else
-    rm -f "$processed"
-  fi
+  pgrep -f "gpu-screen-recorder" >/dev/null || pgrep -x slurp >/dev/null || pgrep -f "WebcamOverlay" >/dev/null
 }
 
 if screenrecording_active; then
-  stop_screenrecording
-elif [[ $STOP_RECORDING == "true" ]]; then
-  exit 1
-else
-  [[ $WEBCAM == "true" ]] && start_webcam_overlay
+  if pgrep -x slurp >/dev/null; then
+    pkill -x slurp 2>/dev/null
+  elif pgrep -f "WebcamOverlay" >/dev/null && ! pgrep -f "gpu-screen-recorder" >/dev/null; then
+    cleanup_webcam
+  else
+    stop_screenrecording
+  fi
+elif [[ "$SCOPE" == "output" ]]; then
+  [[ "$WEBCAM" == "true" ]] && start_webcam_overlay
 
-  start_screenrecording || cleanup_webcam
+  if ! output=$(slurp -o -f "%o"); then
+    [[ "$WEBCAM" == "true" ]] && cleanup_webcam
+    exit 1
+  fi
+
+  if [[ -z "$output" ]]; then
+    notify-send "Error" "Could not detect monitor" -u critical
+    [[ "$WEBCAM" == "true" ]] && cleanup_webcam
+    exit 1
+  fi
+
+  start_screenrecording "$output"
+else
+  [[ "$WEBCAM" == "true" ]] && start_webcam_overlay
+
+  scale=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .scale')
+
+  if ! region=$(slurp -f "%wx%h+%x+%y"); then
+    [[ "$WEBCAM" == "true" ]] && cleanup_webcam
+    exit 1
+  fi
+
+  if [[ "$region" =~ ^([0-9]+)x([0-9]+)\+([0-9]+)\+([0-9]+)$ ]]; then
+    w=$(awk "BEGIN {printf \"%.0f\", ${BASH_REMATCH[1]} * $scale}")
+    h=$(awk "BEGIN {printf \"%.0f\", ${BASH_REMATCH[2]} * $scale}")
+    x=$(awk "BEGIN {printf \"%.0f\", ${BASH_REMATCH[3]} * $scale}")
+    y=$(awk "BEGIN {printf \"%.0f\", ${BASH_REMATCH[4]} * $scale}")
+    scaled_region="${w}x${h}+${x}+${y}"
+  else
+    scaled_region="$region"
+  fi
+
+  start_screenrecording region -region "$scaled_region"
 fi

bin/omarchy-cmd-screensaver

@@ -1,35 +1,28 @@
 #!/bin/bash
 
-# Run the Omarchy screensaver using random effects from TTE.
-
 screensaver_in_focus() {
-  hyprctl activewindow -j | jq -e '.class == "org.omarchy.screensaver"' >/dev/null 2>&1
+  hyprctl activewindow -j | jq -e '.class == "Screensaver"' >/dev/null 2>&1
 }
 
 exit_screensaver() {
-  hyprctl keyword cursor:invisible false &>/dev/null || true
+  hyprctl keyword cursor:invisible false
   pkill -x tte 2>/dev/null
-  pkill -f org.omarchy.screensaver 2>/dev/null
+  pkill -f "alacritty --class Screensaver" 2>/dev/null
   exit 0
 }
 
-# Exit the screensaver on signals and input from keyboard and mouse
 trap exit_screensaver SIGINT SIGTERM SIGHUP SIGQUIT
 
-printf '\033]11;rgb:00/00/00\007'  # Set background color to black
-
 hyprctl keyword cursor:invisible true &>/dev/null
 
-tty=$(tty 2>/dev/null)
-
 while true; do
+  effect=$(tte 2>&1 | grep -oP '{\K[^}]+' | tr ',' ' ' | tr ' ' '\n' | sed -n '/^beams$/,$p' | sort -u | shuf -n1)
   tte -i ~/.config/omarchy/branding/screensaver.txt \
-    --frame-rate 120 --canvas-width 0 --canvas-height 0 --reuse-canvas --anchor-canvas c --anchor-text c\
-    --random-effect --exclude-effects dev_worm \
-    --no-eol --no-restore-cursor &
+    --frame-rate 240 --canvas-width 0 --canvas-height 0 --anchor-canvas c --anchor-text c --no-eol \
+    "$effect" &
 
-  while pgrep -t "${tty#/dev/}" -x tte >/dev/null; do
-    if read -n1 -t 1 || ! screensaver_in_focus; then
+  while pgrep -x tte >/dev/null; do
+    if read -n 1 -t 3 || ! screensaver_in_focus; then
       exit_screensaver
     fi
   done

bin/omarchy-cmd-screenshot

@@ -1,133 +1,83 @@
 #!/bin/bash
 
-# Take a screenshot of the whole screen, a specific window, or a user-drawn region.
-# Saves to ~/Pictures by default, but that can be changed via OMARCHY_SCREENSHOT_DIR or XDG_PICTURES_DIR ENVs.
-# Editor defaults to Satty but can be changed via --editor=<name> or OMARCHY_SCREENSHOT_EDITOR env
-
 [[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
 OUTPUT_DIR="${OMARCHY_SCREENSHOT_DIR:-${XDG_PICTURES_DIR:-$HOME/Pictures}}"
 
-if [[ ! -d $OUTPUT_DIR ]]; then
-  mkdir -p "$OUTPUT_DIR"
-  notify-send "Created screenshot directory: $OUTPUT_DIR" -u normal -t 2000
+if [[ ! -d "$OUTPUT_DIR" ]]; then
+  notify-send "Screenshot directory does not exist: $OUTPUT_DIR" -u critical -t 3000
+  exit 1
 fi
 
 pkill slurp && exit 0
 
-SCREENSHOT_EDITOR="${OMARCHY_SCREENSHOT_EDITOR:-satty}"
-
-# Parse --editor flag from any position
-ARGS=()
-for arg in "$@"; do
-  if [[ $arg == --editor=* ]]; then
-    SCREENSHOT_EDITOR="${arg#--editor=}"
-  else
-    ARGS+=("$arg")
-  fi
-done
-set -- "${ARGS[@]}"
-
-open_editor() {
-  local filepath="$1"
-  if [[ $SCREENSHOT_EDITOR == "satty" ]]; then
-    satty --filename "$filepath" \
-      --output-filename "$filepath" \
-      --actions-on-enter save-to-clipboard \
-      --save-after-copy \
-      --copy-command 'wl-copy'
-  else
-    $SCREENSHOT_EDITOR "$filepath"
-  fi
-}
-
 MODE="${1:-smart}"
 PROCESSING="${2:-slurp}"
 
-# accounting for portrait/transformed displays
-JQ_MONITOR_GEO='
-  def format_geo:
-    .x as $x | .y as $y |
-    (.width / .scale | floor) as $w |
-    (.height / .scale | floor) as $h |
-    .transform as $t |
-    if $t == 1 or $t == 3 then
-      "\($x),\($y) \($h)x\($w)"
-    else
-      "\($x),\($y) \($w)x\($h)"
-    end;
-'
-
 get_rectangles() {
   local active_workspace=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .activeWorkspace.id')
-  hyprctl monitors -j | jq -r --arg ws "$active_workspace" "${JQ_MONITOR_GEO} .[] | select(.activeWorkspace.id == (\$ws | tonumber)) | format_geo"
+  hyprctl monitors -j | jq -r --arg ws "$active_workspace" '.[] | select(.activeWorkspace.id == ($ws | tonumber)) | "\(.x),\(.y) \((.width / .scale) | floor)x\((.height / .scale) | floor)"'
   hyprctl clients -j | jq -r --arg ws "$active_workspace" '.[] | select(.workspace.id == ($ws | tonumber)) | "\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1])"'
 }
 
 # Select based on mode
 case "$MODE" in
-region)
-  hyprpicker -r -z >/dev/null 2>&1 &
-  PID=$!
-  sleep .1
-  SELECTION=$(slurp 2>/dev/null)
-  kill $PID 2>/dev/null
-  ;;
-windows)
-  hyprpicker -r -z >/dev/null 2>&1 &
-  PID=$!
-  sleep .1
-  SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
-  kill $PID 2>/dev/null
-  ;;
-fullscreen)
-  SELECTION=$(hyprctl monitors -j | jq -r "${JQ_MONITOR_GEO} .[] | select(.focused == true) | format_geo")
-  ;;
-smart | *)
-  RECTS=$(get_rectangles)
-  hyprpicker -r -z >/dev/null 2>&1 &
-  PID=$!
-  sleep .1
-  SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
-  kill $PID 2>/dev/null
+  region)
+    wayfreeze & PID=$!
+    sleep .1
+    SELECTION=$(slurp 2>/dev/null)
+    kill $PID 2>/dev/null
+    ;;
+  windows)
+    wayfreeze & PID=$!
+    sleep .1
+    SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
+    kill $PID 2>/dev/null
+    ;;
+  fullscreen)
+    SELECTION=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | "\(.x),\(.y) \((.width / .scale) | floor)x\((.height / .scale) | floor)"')
+    ;;
+  smart|*)
+    RECTS=$(get_rectangles)
+    wayfreeze & PID=$!
+    sleep .1
+    SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
+    kill $PID 2>/dev/null
 
-  # If the selection area is L * W < 20, we'll assume you were trying to select whichever
-  # window or output it was inside of to prevent accidental 2px snapshots
-  if [[ $SELECTION =~ ^([0-9]+),([0-9]+)[[:space:]]([0-9]+)x([0-9]+)$ ]]; then
-    if ((${BASH_REMATCH[3]} * ${BASH_REMATCH[4]} < 20)); then
-      click_x="${BASH_REMATCH[1]}"
-      click_y="${BASH_REMATCH[2]}"
+    # If the selction area is L * W < 20, we'll assume you were trying to select whichever
+    # window or output it was inside of to prevent accidental 2px snapshots
+    if [[ "$SELECTION" =~ ^([0-9]+),([0-9]+)[[:space:]]([0-9]+)x([0-9]+)$ ]]; then
+      if (( ${BASH_REMATCH[3]} * ${BASH_REMATCH[4]} < 20 )); then
+        click_x="${BASH_REMATCH[1]}"
+        click_y="${BASH_REMATCH[2]}"
 
-      while IFS= read -r rect; do
-        if [[ $rect =~ ^([0-9]+),([0-9]+)[[:space:]]([0-9]+)x([0-9]+) ]]; then
-          rect_x="${BASH_REMATCH[1]}"
-          rect_y="${BASH_REMATCH[2]}"
-          rect_width="${BASH_REMATCH[3]}"
-          rect_height="${BASH_REMATCH[4]}"
+        while IFS= read -r rect; do
+          if [[ "$rect" =~ ^([0-9]+),([0-9]+)[[:space:]]([0-9]+)x([0-9]+) ]]; then
+            rect_x="${BASH_REMATCH[1]}"
+            rect_y="${BASH_REMATCH[2]}"
+            rect_width="${BASH_REMATCH[3]}"
+            rect_height="${BASH_REMATCH[4]}"
 
-          if ((click_x >= rect_x && click_x < rect_x + rect_width && click_y >= rect_y && click_y < rect_y + rect_height)); then
-            SELECTION="${rect_x},${rect_y} ${rect_width}x${rect_height}"
-            break
+            if (( click_x >= rect_x && click_x < rect_x+rect_width && click_y >= rect_y && click_y < rect_y+rect_height )); then
+              SELECTION="${rect_x},${rect_y} ${rect_width}x${rect_height}"
+              break
+            fi
           fi
-        fi
-      done <<<"$RECTS"
+        done <<< "$RECTS"
+      fi
     fi
-  fi
-  ;;
+    ;;
 esac
 
-[[ -z $SELECTION ]] && exit 0
-
-FILENAME="screenshot-$(date +'%Y-%m-%d_%H-%M-%S').png"
-FILEPATH="$OUTPUT_DIR/$FILENAME"
+[ -z "$SELECTION" ] && exit 0
 
 if [[ $PROCESSING == "slurp" ]]; then
-  grim -g "$SELECTION" "$FILEPATH" || exit 1
-  wl-copy <"$FILEPATH"
-
-  (
-    ACTION=$(notify-send "Screenshot saved to clipboard and file" "Edit with Super + Alt + , (or click this)" -t 10000 -i "$FILEPATH" -A "default=edit")
-    [[ $ACTION == "default" ]] && open_editor "$FILEPATH"
-  ) &
+grim -g "$SELECTION" - |
+  satty --filename - \
+    --output-filename "$OUTPUT_DIR/screenshot-$(date +'%Y-%m-%d_%H-%M-%S').png" \
+    --early-exit \
+    --actions-on-enter save-to-clipboard \
+    --save-after-copy \
+    --copy-command 'wl-copy'
 else
   grim -g "$SELECTION" - | wl-copy
 fi

bin/omarchy-cmd-share

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-# Share clipboard, file, or folder using LocalSend. Bound to Super + Ctrl + S by default.
-
 if (($# == 0)); then
   echo "Usage: omarchy-cmd-share [clipboard|file|folder]"
   exit 1
@@ -25,7 +23,7 @@ else
       # Pick one or more files from home directory
       FILES=$(find "$HOME" -type f 2>/dev/null | fzf --multi)
     fi
-    [[ -z $FILES ]] && exit 0
+    [ -z "$FILES" ] && exit 0
   fi
 fi
 

bin/omarchy-cmd-terminal-cwd

@@ -1,18 +1,13 @@
 #!/bin/bash
 
-# Returns the current working directory of the active terminal window,
-# so a new terminal window can be started in the same directory.
-
 # Go from current active terminal to its child shell process and run cwd there
 terminal_pid=$(hyprctl activewindow | awk '/pid:/ {print $2}')
 shell_pid=$(pgrep -P "$terminal_pid" | tail -n1)
 
 if [[ -n $shell_pid ]]; then
   cwd=$(readlink -f "/proc/$shell_pid/cwd" 2>/dev/null)
-  shell=$(readlink -f "/proc/$shell_pid/exe" 2>/dev/null)
 
-  # Check if $shell is a valid shell and $cwd is a directory.
-  if grep -qs "$shell" /etc/shells && [[ -d $cwd ]]; then
+  if [[ -d $cwd ]]; then
     echo "$cwd"
   else
     echo "$HOME"

bin/omarchy-config-direct-boot

@@ -1,45 +0,0 @@
-#!/bin/bash
-
-# Add an EFI boot entry for the Omarchy UKI, allowing the system to boot directly
-# without a bootloader like Limine. Requires UEFI firmware and a built UKI.
-
-if [[ ! -d /sys/firmware/efi ]]; then
-  echo "Error: System is not booted in UEFI mode" >&2
-  exit 1
-fi
-
-if ! efibootmgr &>/dev/null; then
-  echo "Error: efibootmgr is not available or not functional" >&2
-  exit 1
-fi
-
-if cat /sys/class/dmi/id/bios_vendor 2>/dev/null | grep -qi "American Megatrends"; then
-  echo "Error: American Megatrends firmware may not safely support custom EFI entries" >&2
-  exit 1
-fi
-
-if cat /sys/class/dmi/id/bios_vendor 2>/dev/null | grep -qi "Apple"; then
-  echo "Error: Apple firmware uses its own boot manager" >&2
-  exit 1
-fi
-
-uki_file=$(find /boot/EFI/Linux/ -name "omarchy*.efi" -printf "%f\n" 2>/dev/null | head -1)
-
-if [[ -z $uki_file ]]; then
-  echo "Error: No Omarchy UKI found in /boot/EFI/Linux/" >&2
-  exit 1
-fi
-
-boot_source=$(findmnt -n -o SOURCE /boot)
-disk=$(echo "$boot_source" | sed 's/p\?[0-9]*$//')
-part=$(echo "$boot_source" | grep -o 'p\?[0-9]*$' | sed 's/^p//')
-
-if gum confirm "Setup direct boot (so snapshot booting must be done via bios)?"; then
-  echo "Creating EFI boot entry for $uki_file"
-
-  sudo efibootmgr --create \
-    --disk "$disk" \
-    --part "$part" \
-    --label "Omarchy" \
-    --loader "\\EFI\\Linux\\$uki_file"
-fi

bin/omarchy-debug

@@ -1,36 +1,7 @@
 #!/bin/bash
 
-# Return exhaustive debugging information about the system to help diagnose problems.
-
-NO_SUDO=false
-PRINT_ONLY=false
-
-while (( $# > 0 )); do
-  case "$1" in
-    --no-sudo)
-      NO_SUDO=true
-      shift
-      ;;
-    --print)
-      PRINT_ONLY=true
-      shift
-      ;;
-    *)
-      echo "Unknown option: $1"
-      echo "Usage: omarchy-debug [--no-sudo] [--print]"
-      exit 1
-      ;;
-  esac
-done
-
 LOG_FILE="/tmp/omarchy-debug.log"
 
-if [[ $NO_SUDO = "true" ]]; then
-  DMESG_OUTPUT="(skipped - --no-sudo flag used)"
-else
-  DMESG_OUTPUT="$(sudo dmesg)"
-fi
-
 cat > "$LOG_FILE" <<EOF
 Date: $(date)
 Hostname: $(hostname)
@@ -44,10 +15,10 @@ $(inxi -Farz)
 =========================================
 DMESG
 =========================================
-$DMESG_OUTPUT
+$(sudo dmesg)
 
 =========================================
-JOURNALCTL (CURRENT BOOT, WARNINGS+ERRORS)
+JOURNALCTL (CURRENT BOOT, ERRORS ONLY)
 =========================================
 $(journalctl -b -p 4..1)
 
@@ -57,11 +28,6 @@ INSTALLED PACKAGES
 $({ expac -S '%n %v (%r)' $(pacman -Qqe) 2>/dev/null; comm -13 <(pacman -Sql | sort) <(pacman -Qqe | sort) | xargs -r expac -Q '%n %v (AUR)'; } | sort)
 EOF
 
-if [[ $PRINT_ONLY = "true" ]]; then
-  cat "$LOG_FILE"
-  exit 0
-fi
-
 OPTIONS=("View log" "Save in current directory")
 if ping -c 1 8.8.8.8 >/dev/null 2>&1; then
   OPTIONS=("Upload log" "${OPTIONS[@]}")
@@ -73,7 +39,7 @@ case "$ACTION" in
   "Upload log")
     echo "Uploading debug log to 0x0.st..."
     URL=$(curl -sF "file=@$LOG_FILE" -Fexpires=24 https://0x0.st)
-    if (( $? == 0 )) && [[ -n $URL ]]; then
+    if [ $? -eq 0 ] && [ -n "$URL" ]; then
       echo "✓ Log uploaded successfully!"
       echo "Share this URL:"
       echo ""

bin/omarchy-dev-add-migration

@@ -1,14 +1,6 @@
 #!/bin/bash
 
-# Creates a new Omarchy migration named after the unix timestamp of the last commit.
-# Only intended for Omarchy developers.
-
 cd ~/.local/share/omarchy
 migration_file="$HOME/.local/share/omarchy/migrations/$(git log -1 --format=%cd --date=unix).sh"
 touch $migration_file
-
-if [[ $1 != "--no-edit" ]]; then
-  nvim $migration_file
-fi
-
-echo $migration_file
+nvim $migration_file

bin/omarchy-drive-info

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# Returns drive information about a given volumne, like /dev/nvme0, which is used by omarchy-drive-select.
-
+# Drive, like /dev/nvme0, to display information about
 if (($# == 0)); then
   echo "Usage: omarchy-drive-info [/dev/drive]"
   exit 1
@@ -11,7 +10,7 @@ fi
 
 # Find the root drive in case we are looking at partitions
 root_drive=$(lsblk -no PKNAME "$drive" 2>/dev/null | tail -n1)
-if [[ -n $root_drive ]]; then
+if [[ -n "$root_drive" ]]; then
   root_drive="/dev/$root_drive"
 else
   root_drive="$drive"
@@ -19,31 +18,11 @@ fi
 
 # Get basic disk information
 size=$(lsblk -dno SIZE "$drive" 2>/dev/null)
-vendor=$(lsblk -dno VENDOR "$root_drive" 2>/dev/null | sed 's/ *$//')
-model=$(lsblk -dno MODEL "$root_drive" 2>/dev/null | sed 's/ *$//')
-
-# Combine vendor and model, avoiding duplication
-label=""
-if [[ -n $vendor && -n $model ]]; then
-  if [[ $model == *$vendor* ]]; then
-    label="$model"
-  else
-    label="$vendor $model"
-  fi
-elif [[ -n $model ]]; then
-  label="$model"
-elif [[ -n $vendor ]]; then
-  label="$vendor"
-fi
+model=$(lsblk -dno MODEL "$root_drive" 2>/dev/null)
 
 # Format display string
 display="$drive"
-[[ -n $size ]] && display="$display ($size)"
-[[ -n $label ]] && display="$display - $label"
-
-# Append compact partition summary
-part_summary=$(lsblk -nro TYPE,NAME,FSTYPE,MOUNTPOINT "$root_drive" 2>/dev/null | \
-  awk '$1=="part" { printf "%s%s%s", s, ($3==""?"unknown":$3), ($4==""?"":"("$4")"); s=", " }')
-[[ -n $part_summary ]] && display+=" [$part_summary]"
+[[ -n "$size" ]] && display="$display ($size)"
+[[ -n "$model" ]] && display="$display - $model"
 
 echo "$display"

bin/omarchy-drive-select

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Select a drive from a list with info that includes space and brand. Used by omarchy-drive-set-password.
+# Select a drive from a list with info that includes space and brand
 
 if (($# == 0)); then
   drives=$(lsblk -dpno NAME | grep -E '/dev/(sd|hd|vd|nvme|mmcblk|xv)')
@@ -10,7 +10,7 @@ fi
 
 drives_with_info=""
 while IFS= read -r drive; do
-  [[ -n $drive ]] || continue
+  [[ -n "$drive" ]] || continue
   drives_with_info+="$(omarchy-drive-info "$drive")"$'\n'
 done <<<"$drives"
 

bin/omarchy-drive-set-password

@@ -1,11 +1,9 @@
 #!/bin/bash
 
-# Set a new encryption password for a drive selected.
-
 encrypted_drives=$(blkid -t TYPE=crypto_LUKS -o device)
 
 if [[ -n $encrypted_drives ]]; then
-  if (( $(wc -l <<<encrypted_drives) == 1 )); then
+  if [[ $(wc -l <<<"$encrypted_drives") -eq 1 ]]; then
     drive_to_change="$encrypted_drives"
   else
     drive_to_change="$(omarchy-drive-select "$encrypted_drives")"

bin/omarchy-font-current

@@ -1,6 +1,3 @@
 #!/bin/bash
 
-# Returns the name of the current monospace font being used by extracting it from the Waybar stylesheet.
-# This can be changed using omarchy-font-set.
-
 grep -oP 'font-family:\s*["'\'']?\K[^;"'\'']+' ~/.config/waybar/style.css | head -n1

bin/omarchy-font-list

@@ -1,5 +1,3 @@
 #!/bin/bash
 
-# Returns a list of all the monospace fonts available on the system that can be set using omarchy-font-set.
-
 fc-list :spacing=100 -f "%{family[0]}\n" | grep -v -i -E 'emoji|signwriting|omarchy' | sort -u

bin/omarchy-font-set

@@ -1,11 +1,8 @@
 #!/bin/bash
 
-# Set the system-wide monospace font that should be used by the terminal, hyprlock, waybar, swayosd, etc.
-# The font name must be one of the ones returned by omarchy-font-list.
-
 font_name="$1"
 
-if [[ -n $font_name ]]; then
+if [[ -n "$font_name" && "$font_name" != "CNCLD" ]]; then
   if fc-list | grep -iq "$font_name"; then
     if [[ -f ~/.config/alacritty/alacritty.toml ]]; then
       sed -i "s/family = \".*\"/family = \"$font_name\"/g" ~/.config/alacritty/alacritty.toml
@@ -21,7 +18,6 @@ if [[ -n $font_name ]]; then
       pkill -SIGUSR2 ghostty
     fi
 
-    sed -i "s/font_family = .*/font_family = $font_name/g" ~/.config/hypr/hyprlock.conf
     sed -i "s/font-family: .*/font-family: '$font_name';/g" ~/.config/waybar/style.css
     sed -i "s/font-family: .*/font-family: '$font_name';/g" ~/.config/swayosd/style.css
     xmlstarlet ed -L \
@@ -31,9 +27,10 @@ if [[ -n $font_name ]]; then
 
     omarchy-restart-waybar
     omarchy-restart-swayosd
+    omarchy-restart-walker
 
     if pgrep -x ghostty; then
-      notify-send -u low "    You must restart Ghostty to see font change"
+      notify-send "    You must restart Ghostty to see font change"
     fi
 
     omarchy-hook font-set "$font_name"

bin/omarchy-haptic-touchpad

@@ -1,94 +0,0 @@
-#!/usr/bin/env python3
-
-"""Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
-
-Monitors touchpad button press events and sends haptic pulses via HID
-feature reports. Required because the kernel's HID haptic subsystem only
-supports Auto Trigger with waveform enumeration, not the simpler Manual
-Trigger protocol used by these Synaptics touchpads.
-"""
-
-import fcntl, glob, os, struct, sys
-
-VENDOR = "06CB"
-REPORT_ID = 0x37
-INTENSITY = 40  # 0-100
-
-# input_event: struct timeval (16 bytes on 64-bit) + type(H) + code(H) + value(i)
-EVENT_FORMAT = "llHHi"
-EVENT_SIZE = struct.calcsize(EVENT_FORMAT)
-EV_KEY = 0x01
-BTN_LEFT = 272
-BTN_RIGHT = 273
-BTN_MIDDLE = 274
-
-# ioctl: HIDIOCSFEATURE(len) = _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
-def HIDIOCSFEATURE(length):
-    return 0xC0000000 | (length << 16) | (ord("H") << 8) | 0x06
-
-
-def find_hidraw():
-    for path in sorted(glob.glob("/sys/class/hidraw/hidraw*")):
-        uevent = os.path.join(path, "device", "uevent")
-        try:
-            with open(uevent) as f:
-                content = f.read().upper()
-            if f"0000{VENDOR}" in content:
-                return os.path.join("/dev", os.path.basename(path))
-        except OSError:
-            continue
-    return None
-
-
-def find_touchpad_event():
-    for path in sorted(glob.glob("/sys/class/input/event*/device/name")):
-        try:
-            with open(path) as f:
-                name = f.read().strip().upper()
-            if VENDOR in name and "TOUCHPAD" in name:
-                event = path.split("/")[-3]
-                return os.path.join("/dev/input", event)
-        except OSError:
-            continue
-    return None
-
-
-def main():
-    hidraw = find_hidraw()
-    if not hidraw:
-        print("No Synaptics haptic touchpad hidraw device found", file=sys.stderr)
-        sys.exit(1)
-
-    event = find_touchpad_event()
-    if not event:
-        print("No Synaptics haptic touchpad input device found", file=sys.stderr)
-        sys.exit(1)
-
-    print(f"Haptic touchpad: hidraw={hidraw} input={event} intensity={INTENSITY}", flush=True)
-
-    haptic_report = struct.pack("BB", REPORT_ID, INTENSITY)
-    ioctl_req = HIDIOCSFEATURE(len(haptic_report))
-
-    hidraw_fd = os.open(hidraw, os.O_RDWR)
-    event_fd = os.open(event, os.O_RDONLY)
-
-    try:
-        while True:
-            data = os.read(event_fd, EVENT_SIZE)
-            if len(data) < EVENT_SIZE:
-                continue
-            _, _, ev_type, code, value = struct.unpack(EVENT_FORMAT, data)
-            if ev_type == EV_KEY and code in (BTN_LEFT, BTN_RIGHT, BTN_MIDDLE) and value == 1:
-                try:
-                    fcntl.ioctl(hidraw_fd, ioctl_req, haptic_report)
-                except OSError:
-                    pass
-    except KeyboardInterrupt:
-        pass
-    finally:
-        os.close(event_fd)
-        os.close(hidraw_fd)
-
-
-if __name__ == "__main__":
-    main()

bin/omarchy-hibernation-available

@@ -1,18 +0,0 @@
-#!/bin/bash
-
-# Check if hibernation is supported
-if [[ ! -f /sys/power/image_size ]]; then
-  exit 1
-fi
-
-# Sum all swap sizes (excluding zram)
-SWAPSIZE_KB=$(awk '!/Filename|zram/ {sum += $3} END {print sum+0}' /proc/swaps)
-SWAPSIZE=$(( 1024 * ${SWAPSIZE_KB:-0} ))
-
-HIBERNATION_IMAGE_SIZE=$(cat /sys/power/image_size)
-
-if (( SWAPSIZE > HIBERNATION_IMAGE_SIZE )) && [[ -f /etc/mkinitcpio.conf.d/omarchy_resume.conf ]]; then
-  exit 0
-else
-  exit 1
-fi

bin/omarchy-hibernation-remove

@@ -1,59 +0,0 @@
-#!/bin/bash
-
-# Removes hibernation setup: disables swap, removes swapfile, removes fstab entry,
-# removes resume hook, and removes suspend-then-hibernate configuration.
-
-MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
-
-# Check if hibernation is configured
-if [[ ! -f $MKINITCPIO_CONF ]] || ! grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
-  echo "Hibernation is not set up"
-  exit 0
-fi
-
-if ! gum confirm "Remove hibernation setup?"; then
-  exit 0
-fi
-
-SWAP_SUBVOLUME="/swap"
-SWAP_FILE="$SWAP_SUBVOLUME/swapfile"
-
-# Disable swap if active
-if swapon --show | grep -q "$SWAP_FILE"; then
-  echo "Disabling swap on $SWAP_FILE"
-  sudo swapoff "$SWAP_FILE"
-fi
-
-# Remove swapfile
-if [[ -f $SWAP_FILE ]]; then
-  echo "Removing swapfile"
-  sudo rm "$SWAP_FILE"
-fi
-
-# Remove swap subvolume
-if sudo btrfs subvolume show "$SWAP_SUBVOLUME" &>/dev/null; then
-  echo "Removing Btrfs subvolume $SWAP_SUBVOLUME"
-  sudo btrfs subvolume delete "$SWAP_SUBVOLUME"
-fi
-
-# Remove fstab entry
-if grep -Fq "$SWAP_FILE" /etc/fstab; then
-  echo "Removing swapfile from /etc/fstab"
-  sudo cp -a /etc/fstab "/etc/fstab.$(date +%Y%m%d%H%M%S).back"
-  sudo sed -i "\|$SWAP_FILE|d" /etc/fstab
-  sudo sed -i '/^# Btrfs swapfile for system hibernation$/d' /etc/fstab
-fi
-
-# Remove suspend-then-hibernate configuration
-echo "Removing suspend-then-hibernate configuration"
-sudo rm -f /etc/systemd/logind.conf.d/lid.conf
-sudo rm -f /etc/systemd/sleep.conf.d/hibernate.conf
-
-# Remove mkinitcpio resume hook
-echo "Removing resume hook"
-sudo rm "$MKINITCPIO_CONF"
-
-echo "Regenerating initramfs..."
-sudo limine-mkinitcpio
-
-echo "Hibernation removed"

bin/omarchy-hibernation-setup

@@ -1,117 +0,0 @@
-#!/bin/bash
-
-# Creates a swap file in the btrfs subvolume, adds the swap file to /etc/fstab,
-# adds a resume hook to mkinitcpio, and configures suspend-then-hibernate.
-
-if [[ ! -f /sys/power/image_size ]]; then
-  echo -e "Hibernation is not supported on your system" >&2
-  exit 0
-fi
-
-if ! command -v limine-mkinitcpio &>/dev/null; then
-  echo "Skipping hibernation setup (requires Limine bootloader)"
-  exit 0
-fi
-
-MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
-SWAP_FILE="/swap/swapfile"
-RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
-
-# Check if hibernation is already configured
-if [[ -f $MKINITCPIO_CONF ]] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
-  # Fix empty resume_offset if btrfs map-swapfile failed during initial setup
-  if [[ -f $RESUME_DROP_IN ]] && grep -q 'resume_offset="$' "$RESUME_DROP_IN" && [[ -f $SWAP_FILE ]]; then
-    RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE" 2>/dev/null)
-    if [[ -n $RESUME_OFFSET ]]; then
-      echo "Fixing empty resume_offset ($RESUME_OFFSET)"
-      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" "$RESUME_DROP_IN"
-      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" /etc/default/limine
-      sudo limine-mkinitcpio
-      sudo limine-update
-    fi
-  fi
-  echo "Hibernation is already set up"
-  exit 0
-fi
-
-if [[ $1 != "--force" ]]; then
-  MEM_TOTAL_HUMAN=$(free --human | awk '/Mem/ {print $2}')
-  if ! gum confirm "Use $MEM_TOTAL_HUMAN on boot drive to make hibernation available?"; then
-    exit 0
-  fi
-fi
-
-SWAP_SUBVOLUME="/swap"
-
-# Create btrfs subvolume for swap
-if ! sudo btrfs subvolume show "$SWAP_SUBVOLUME" &>/dev/null; then
-  echo "Creating Btrfs subvolume"
-  sudo btrfs subvolume create "$SWAP_SUBVOLUME"
-  sudo chattr +C "$SWAP_SUBVOLUME"
-fi
-
-# Create swapfile
-if ! sudo swaplabel "$SWAP_FILE" &>/dev/null; then
-  echo "Creating swapfile in Btrfs subvolume"
-  MEM_TOTAL_KB="$(awk '/MemTotal/ {print $2}' /proc/meminfo)k"
-  sudo btrfs filesystem mkswapfile -s "$MEM_TOTAL_KB" "$SWAP_FILE"
-fi
-
-# Add swapfile to fstab
-if ! grep -Fq "$SWAP_FILE" /etc/fstab; then
-  echo "Adding swapfile to /etc/fstab"
-  sudo cp -a /etc/fstab "/etc/fstab.$(date +%Y%m%d%H%M%S).back"
-  printf "\n# Btrfs swapfile for system hibernation\n%s none swap defaults,pri=0 0 0\n" "$SWAP_FILE" | sudo tee -a /etc/fstab >/dev/null
-fi
-
-# Enable swap
-if ! swapon --show | grep -q "$SWAP_FILE"; then
-  echo "Enabling swap on $SWAP_FILE"
-  sudo swapon -p 0 "$SWAP_FILE"
-fi
-
-# Add resume hook to mkinitcpio
-sudo mkdir -p /etc/mkinitcpio.conf.d
-echo "Adding resume hook to $MKINITCPIO_CONF"
-echo "HOOKS+=(resume)" | sudo tee "$MKINITCPIO_CONF" >/dev/null
-
-# Ensure keyboard backlight doesn't prevent sleep
-sudo cp -p "$OMARCHY_PATH/default/systemd/system-sleep/keyboard-backlight" /usr/lib/systemd/system-sleep/
-
-# Add resume= kernel parameters so the initramfs resume hook knows where to find the
-# hibernation image. Without these, resume happens late (after GPU drivers load) and fails.
-if [[ ! -f $RESUME_DROP_IN ]]; then
-  echo "Adding resume kernel parameters"
-  sudo swapon -p 0 "$SWAP_FILE" 2>/dev/null
-  RESUME_DEVICE=$(findmnt -no SOURCE -T "$SWAP_FILE" | sed 's/\[.*\]//')
-  RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
-  if [[ -n $RESUME_OFFSET ]]; then
-    sudo mkdir -p /etc/limine-entry-tool.d
-    echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
-    sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
-  else
-    echo "Warning: Could not determine resume offset for $SWAP_FILE" >&2
-  fi
-fi
-
-# Use ACPI alarm for RTC wakeup on s2idle systems (needed for suspend-then-hibernate)
-if grep -q "\[s2idle\]" /sys/power/mem_sleep 2>/dev/null; then
-  LIMINE_DROP_IN="/etc/limine-entry-tool.d/rtc-alarm.conf"
-  if [[ ! -f $LIMINE_DROP_IN ]]; then
-    echo "Enabling ACPI RTC alarm for s2idle suspend"
-    sudo mkdir -p /etc/limine-entry-tool.d
-    echo 'KERNEL_CMDLINE[default]+=" rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
-    sudo tee -a /etc/default/limine < "$LIMINE_DROP_IN" >/dev/null
-  fi
-fi
-
-# Regenerate initramfs and boot entry
-echo "Regenerating initramfs..."
-sudo limine-mkinitcpio
-sudo limine-update
-
-echo
-
-if [[ $1 != "--force" ]] && gum confirm "Reboot to enable hibernation?"; then
-  omarchy-system-reboot
-fi

bin/omarchy-hook

@@ -1,10 +1,8 @@
 #!/bin/bash
 
-# Run a named hook, like post-update (available in ~/.config/omarchy/hooks/post-update).
-
 set -e
 
-if (( $# < 1 )); then
+if [[ $# -lt 1 ]]; then
   echo "Usage: omarchy-hook [name] [args...]"
   exit 1
 fi

bin/omarchy-hw-asus-rog

@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer is an Asus ROG machine.
-
-[[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "ASUSTeK COMPUTER INC." ]] &&
-   grep -q "ROG" /sys/class/dmi/id/product_family 2>/dev/null

bin/omarchy-hw-dell-xps-oled

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Match Dell XPS systems with LG OLED panel on Intel Panther Lake (Xe3) GPU.
-
-omarchy-hw-match "XPS" \
-  && omarchy-hw-intel-ptl \
-  && test "$(od -An -tx1 -j8 -N2 /sys/class/drm/card*-eDP-*/edid 2>/dev/null | tr -d ' \n')" = "30e4"

bin/omarchy-hw-external-monitors

@@ -1,10 +0,0 @@
-#!/bin/bash
-
-# Returns true when an external monitor is physically connected.
-# Uses kernel DRM state so the result is independent of Hyprland's startup timing.
-
-for status in /sys/class/drm/card*-*/status; do
-  [[ "$status" == *-eDP-*/status ]] && continue
-  [[ "$(<"$status")" == "connected" ]] && exit 0
-done
-exit 1

bin/omarchy-hw-framework16

@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer is a Framework Laptop 16.
-
-[[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Framework" ]] &&
-  omarchy-hw-match "Laptop 16"

bin/omarchy-hw-hybrid-gpu

@@ -1,3 +0,0 @@
-#!/bin/bash
-
-(($(lspci | grep -cE 'VGA|3D|Display') >= 2))

bin/omarchy-hw-intel

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer has an Intel CPU.
-
-[[ $(grep -m1 "vendor_id" /proc/cpuinfo 2>/dev/null | cut -d: -f2 | tr -d ' ') == "GenuineIntel" ]]

bin/omarchy-hw-intel-ptl

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer has an Intel Panther Lake GPU.
-
-lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'

bin/omarchy-hw-match

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Match against the computer's DMI product name or product family (case-insensitive).
-# Usage: omarchy-hw-match "XPS" or omarchy-hw-match "ThinkPad"
-
-grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null ||
-grep -qi "$1" /sys/class/dmi/id/product_family 2>/dev/null

bin/omarchy-hw-recover-internal-monitor

@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# Clear the internal-monitor-disable toggle if no external display is connected.
-# Runs before the graphical session so Hyprland doesn't block on having no output
-# to render to when the user rebooted with the external unplugged.
-
-TOGGLE="$HOME/.local/state/omarchy/toggles/hypr/internal-monitor-disable.conf"
-
-if [[ -f $TOGGLE ]] && ! omarchy-hw-external-monitors; then
-  rm -f "$TOGGLE"
-fi

bin/omarchy-hw-surface

@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer is a Microsoft Surface device.
-
-[[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Microsoft Corporation" ]] &&
-  omarchy-hw-match "Surface"

bin/omarchy-hw-touchpad

@@ -1,4 +0,0 @@
-#!/bin/bash
-
-device=$(hyprctl devices -j | jq -r '[.mice[] | .name | select(test("touchpad|trackpad"; "i"))] | first // empty')
-[[ -n $device ]] && echo "$device"

bin/omarchy-hw-vulkan

@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Detect whether Vulkan is available.
-
-[[ -d /usr/share/vulkan/icd.d ]] &&
-  find /usr/share/vulkan/icd.d -maxdepth 1 -name "*.json" -print -quit | grep -q .

bin/omarchy-hyprland-active-window-transparency-toggle

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Toggles transparency for the currently focused window.
-
-hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle

bin/omarchy-hyprland-monitor-focused

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Print the name of the currently focused Hyprland monitor.
-
-hyprctl monitors -j | jq -r '.[] | select(.focused == true).name'

bin/omarchy-hyprland-monitor-internal

@@ -1,37 +0,0 @@
-#!/bin/bash
-
-TOGGLE="internal-monitor-disable"
-
-enable() {
-  if omarchy-hyprland-toggle-enabled "$TOGGLE"; then
-    omarchy-hyprland-toggle --disabled-notification "󰍹    Laptop display enabled" "$TOGGLE"
-  fi
-}
-
-disable() {
-  if omarchy-hw-external-monitors; then
-    if omarchy-hyprland-toggle-disabled "$TOGGLE"; then
-      omarchy-hyprland-toggle --enabled-notification "󰍹    Laptop display disabled" "$TOGGLE"
-    fi
-  else
-    notify-send -u low "󰍹    Can't disable the only active display"
-    exit 1
-  fi
-}
-
-recover() {
-  if ! omarchy-hw-external-monitors && omarchy-hyprland-toggle-enabled "$TOGGLE"; then
-    omarchy-hyprland-toggle "$TOGGLE"
-  fi
-}
-
-case "$1" in
-  on) enable ;;
-  off) disable ;;
-  toggle) if omarchy-hyprland-toggle-enabled "$TOGGLE"; then enable; else disable; fi ;;
-  recover) recover ;;
-  *)
-    echo "Usage: $(basename "$0") {on|off|toggle|recover}" >&2
-    exit 1
-    ;;
-esac

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -1,35 +0,0 @@
-#!/bin/bash
-
-# Get the active monitor (the one with the cursor)
-MONITOR_INFO=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)')
-ACTIVE_MONITOR=$(echo "$MONITOR_INFO" | jq -r '.name')
-CURRENT_SCALE=$(echo "$MONITOR_INFO" | jq -r '.scale')
-WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
-HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
-REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
-
-# Cycle through scales: 1 → 1.25 → 1.6 → 2 → 3 → 1 (or reverse with --reverse)
-SCALES=(1 1.25 1.6 2 3)
-
-# Find the index of the scale closest to the current one (Hyprland may
-# snap fractional scales to nearby values, so we can't match exactly)
-CURRENT_IDX=$(awk -v s="$CURRENT_SCALE" -v list="${SCALES[*]}" 'BEGIN {
-  n = split(list, arr, " ")
-  best = 0; best_diff = 1e9
-  for (i = 1; i <= n; i++) {
-    d = s - arr[i]; if (d < 0) d = -d
-    if (d < best_diff) { best_diff = d; best = i - 1 }
-  }
-  print best
-}')
-
-if [[ "$1" == "--reverse" ]]; then
-  NEW_IDX=$(( (CURRENT_IDX - 1 + ${#SCALES[@]}) % ${#SCALES[@]} ))
-else
-  NEW_IDX=$(( (CURRENT_IDX + 1) % ${#SCALES[@]} ))
-fi
-
-NEW_SCALE=${SCALES[$NEW_IDX]}
-
-hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
-notify-send -u low "󰍹    Display scaling set to ${NEW_SCALE}x"

bin/omarchy-hyprland-monitor-watch

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-# Listen on Hyprland's event socket and recover the internal display whenever
-# a monitor is removed.
-
-SOCKET="$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock"
-
-socat -U - "UNIX-CONNECT:$SOCKET" | while read -r event; do
-  case "$event" in
-    monitorremoved\>\>*|monitorremovedv2\>\>*)
-      omarchy-hyprland-monitor-internal recover
-      ;;
-  esac
-done

bin/omarchy-hyprland-toggle

@@ -1,31 +0,0 @@
-#!/bin/bash
-
-# Toggle permanent Hyprland flags by copying them into a directory that's sourced entirely.
-
-ENABLED_NOTIFICATION=""
-DISABLED_NOTIFICATION=""
-
-while [[ $# -gt 1 ]]; do
-  case $1 in
-    --enabled-notification) ENABLED_NOTIFICATION="$2"; shift 2 ;;
-    --disabled-notification) DISABLED_NOTIFICATION="$2"; shift 2 ;;
-    *) break ;;
-  esac
-done
-
-FLAG_NAME="$1"
-FLAG="$HOME/.local/state/omarchy/toggles/hypr/$FLAG_NAME.conf"
-FLAG_SOURCE="$OMARCHY_PATH/default/hypr/toggles/$FLAG_NAME.conf"
-
-if [[ -f $FLAG ]]; then
-  rm $FLAG
-  [[ -n $DISABLED_NOTIFICATION ]] && notify-send -u low "$DISABLED_NOTIFICATION"
-elif [[ -f $FLAG_SOURCE ]]; then
-  cp $FLAG_SOURCE $FLAG
-  [[ -n $ENABLED_NOTIFICATION ]] && notify-send -u low "$ENABLED_NOTIFICATION"
-else
-  echo "Flag not found: $FLAG_NAME"
-  exit 1
-fi
-
-hyprctl reload

bin/omarchy-hyprland-toggle-disabled

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Check if a Hyprland toggle is currently disabled (missing).
-
-[[ ! -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-toggle-enabled

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Check if a Hyprland toggle is currently enabled.
-
-[[ -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-window-gaps-toggle

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Toggles the window gaps globally between no gaps and the default.
-
-omarchy-hyprland-toggle window-no-gaps

bin/omarchy-hyprland-window-pop

@@ -2,45 +2,21 @@
 
 # Toggle to pop-out a tile to stay fixed on a display basis.
 
-# Usage:
-# omarchy-hyprland-window-pop [width height [x y]]
-#
-# Arguments:
-#   width   Optional. Width of the floating window. Default: 1300
-#   height  Optional. Height of the floating window. Default: 900
-#   x       Optional. X position of the window. Must provide both X and Y to take effect.
-#   y       Optional. Y position of the window. Must provide both X and Y to take effect.
-#
-# Behavior:
-#   - If the window is already pinned, it will be unpinned and removed from the pop layer.
-#   - If the window is not pinned, it will be floated, resized, moved/centered, pinned, brought to top, and popped.
-
-width=${1:-1300}
-height=${2:-900}
-x=${3:-}
-y=${4:-}
-
 active=$(hyprctl activewindow -j)
-pinned=$(echo "$active" | jq ".pinned")
-addr=$(echo "$active" | jq -r ".address")
+pinned=$(echo "$active" | jq .pinned)
+addr=$(echo "$active" | jq -r  ".address")
+[ -z "$addr" ] && { echo "No active window"; exit 0; }
 
-if [[ $pinned == "true" ]]; then
+if [ "$pinned" = "true" ]; then
   hyprctl -q --batch \
-    "dispatch pin address:$addr;" \
-    "dispatch togglefloating address:$addr;" \
-    "dispatch tagwindow -pop address:$addr;"
-elif [[ -n $addr ]]; then
-  hyprctl dispatch togglefloating address:$addr
-  hyprctl dispatch resizeactive exact $width $height address:$addr
-
-  if [[ -n $x && -n $y ]]; then
-    hyprctl dispatch moveactive $x $y address:$addr
-  else
-    hyprctl dispatch centerwindow address:$addr
-  fi
-
+  "dispatch pin address:$addr;" \
+  "dispatch togglefloating address:$addr;" \
+  "dispatch tagwindow -pop address:$addr;"
+else
   hyprctl -q --batch \
-    "dispatch pin address:$addr;" \
-    "dispatch alterzorder top address:$addr;" \
-    "dispatch tagwindow +pop address:$addr;"
+  "dispatch togglefloating address:$addr;" \
+  "dispatch centerwindow address:$addr;" \
+  "dispatch pin address:$addr;" \
+  "dispatch alterzorder top address:$addr;" \
+  "dispatch tagwindow +pop address:$addr;"
 fi

bin/omarchy-hyprland-window-single-square-aspect-toggle

@@ -1,8 +0,0 @@
-#!/bin/bash
-
-# Toggle single-window square aspect ratio.
-
-omarchy-hyprland-toggle \
-  --enabled-notification "      Enable single-window square aspect ratio" \
-  --disabled-notification "      Disable single-window square aspect ratio" \
-  single-window-aspect-ratio

bin/omarchy-hyprland-workspace-layout-toggle

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-# Toggle the layout on the current active workspace between dwindle and scrolling
-
-ACTIVE_WORKSPACE=$(hyprctl activeworkspace -j | jq -r '.id')
-CURRENT_LAYOUT=$(hyprctl activeworkspace -j | jq -r '.tiledLayout')
-
-case "$CURRENT_LAYOUT" in
-  dwindle) NEW_LAYOUT=scrolling ;;
-  *) NEW_LAYOUT=dwindle ;;
-esac
-
-hyprctl keyword workspace $ACTIVE_WORKSPACE, layout:$NEW_LAYOUT
-notify-send -u low "󱂬    Workspace layout set to $NEW_LAYOUT"

bin/omarchy-hyprland-workspace-toggle-gaps

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+workspace_id=$(hyprctl activeworkspace -j | jq -r .id)
+gaps=$(hyprctl workspacerules -j | jq -r ".[] | select(.workspaceString==\"$workspace_id\") | .gapsOut[0] // 0")
+
+if [[ $gaps == "0" ]]; then
+  hyprctl keyword "workspace $workspace_id, gapsout:10, gapsin:5, bordersize:2"
+else \
+  hyprctl keyword "workspace $workspace_id, gapsout:0, gapsin:0, bordersize:0"
+fi

bin/omarchy-install-chromium-google-account

@@ -1,8 +1,5 @@
 #!/bin/bash
 
-# Allow Chromium to sign in to Google accounts by adding the correct
-# oauth client id and secret to ~/.config/chromium-flags.conf.
-
 if [[ -f ~/.config/chromium-flags.conf ]]; then
   CONF=~/.config/chromium-flags.conf
 

bin/omarchy-install-dev-env

@@ -1,17 +1,15 @@
 #!/bin/bash
 
-# Install one of the supported development environments. Usually called via Install > Development > * in the Omarchy Menu.
-
-if [[ -z $1 ]]; then
-  echo "Usage: omarchy-install-dev-env <ruby|node|bun|deno|go|laravel|symfony|php|python|elixir|phoenix|rust|java|zig|ocaml|dotnet|clojure|scala>" >&2
+if [[ -z "$1" ]]; then
+  echo "Usage: omarchy-install-dev-env <ruby|node|bun|go|laravel|symfony|php|python|elixir|phoenix|rust|java|ocaml|dotnet|clojure>" >&2
   exit 1
 fi
 
 install_php() {
-  omarchy-pkg-add php composer php-sqlite xdebug
+  sudo pacman -S php composer php-sqlite xdebug --noconfirm
 
   # Install Path for Composer
-  if [[ :$PATH: != *:$HOME/.config/composer/vendor/bin:* ]]; then
+  if [[ ":$PATH:" != *":$HOME/.config/composer/vendor/bin:"* ]]; then
     echo 'export PATH="$HOME/.config/composer/vendor/bin:$PATH"' >>"$HOME/.bashrc"
     source "$HOME/.bashrc"
     echo "Added Composer global bin directory to PATH."
@@ -43,17 +41,15 @@ install_php() {
 
 install_node() {
   echo -e "Installing Node.js...\n"
-  mise use --global node
+  mise use --global node@lts
 }
 
 case "$1" in
 ruby)
   echo -e "Installing Ruby on Rails...\n"
   omarchy-pkg-add libyaml
-  mise settings add ruby.compile false
-  mise settings add idiomatic_version_file_enable_tools ruby
   mise use --global ruby@latest
-  echo "gem: --no-document" >~/.gemrc
+  mise settings add idiomatic_version_file_enable_tools ruby
   mise x ruby -- gem install rails --no-document
   echo -e "\nYou can now run: rails new myproject"
   ;;
@@ -142,10 +138,4 @@ clojure)
   omarchy-pkg-add rlwrap
   mise use --global clojure@latest
   ;;
-scala)
-  echo -e "Installing Scala...\n"
-  mise use --global java@latest
-  mise use --global scala@latest
-  mise use --global scala-cli@latest
-  ;;
 esac

bin/omarchy-install-docker-dbs

@@ -1,21 +1,18 @@
 #!/bin/bash
 
-# Install one of the supported databases in a Docker container with the suitable development options.
-# Usually called via Install > Development > Docker DB from the Omarchy Menu.
-
 options=("MySQL" "PostgreSQL" "Redis" "MongoDB" "MariaDB" "MSSQL")
 
-if (( $# == 0 )); then
+if [[ "$#" -eq 0 ]]; then
   choices=$(printf "%s\n" "${options[@]}" | gum choose --header "Select database (return to install, esc to cancel)") || main_menu
 else
   choices="$@"
 fi
 
-if [[ -n $choices ]]; then
+if [[ -n "$choices" ]]; then
   for db in $choices; do
     case $db in
     MySQL) sudo docker run -d --restart unless-stopped -p "127.0.0.1:3306:3306" --name=mysql8 -e MYSQL_ROOT_PASSWORD= -e MYSQL_ALLOW_EMPTY_PASSWORD=true mysql:8.4 ;;
-    PostgreSQL) sudo docker run -d --restart unless-stopped -p "127.0.0.1:5432:5432" --name=postgres18 -e POSTGRES_HOST_AUTH_METHOD=trust postgres:18 ;;
+    PostgreSQL) sudo docker run -d --restart unless-stopped -p "127.0.0.1:5432:5432" --name=postgres17 -e POSTGRES_HOST_AUTH_METHOD=trust postgres:17 ;;
     MariaDB) sudo docker run -d --restart unless-stopped -p "127.0.0.1:3306:3306" --name=mariadb11 -e MARIADB_ROOT_PASSWORD= -e MARIADB_ALLOW_EMPTY_ROOT_PASSWORD=true mariadb:11.8 ;;
     Redis) sudo docker run -d --restart unless-stopped -p "127.0.0.1:6379:6379" --name=redis redis:7 ;;
     MongoDB) sudo docker run -d --restart unless-stopped -p "127.0.0.1:27017:27017" --name mongodb -e MONGO_INITDB_ROOT_USERNAME=admin -e MONGO_INITDB_ROOT_PASSWORD=admin123 mongo:noble ;;

bin/omarchy-install-dropbox

@@ -1,10 +1,8 @@
 #!/bin/bash
 
-# Install and start the Dropbox service. Must then be authenticated via the web.
-
 echo "Installing all dependencies..."
 omarchy-pkg-add dropbox dropbox-cli libappindicator-gtk3 python-gpgme nautilus-dropbox
 
 echo "Starting Dropbox..."
 uwsm-app -- dropbox-cli start &>/dev/null &
-echo "See Dropbox icon behind  hover tray in top right and right-click for setup."
+echo "See Dropbox icon behind   hover tray in top right and right-click for setup."

bin/omarchy-install-geforce-now

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-# Install and launch Geforce Now.
-
-set -e
-
-omarchy-pkg-add flatpak
-cd /tmp
-
-# Download and run GeForce NOW
-curl -LO https://international.download.nvidia.com/GFNLinux/GeForceNOWSetup.bin
-chmod +x GeForceNOWSetup.bin
-./GeForceNOWSetup.bin
-
-# Ensure a separate browser process not started by GFN is available.
-# If not, it seems like GFN has a tendency to hang on login.
-setsid omarchy-launch-browser

bin/omarchy-install-nordvpn

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-# Install the NordVPN service with optional GUI.
-
-echo "Installing NordVPN..."
-omarchy-pkg-aur-add nordvpn-bin
-
-echo "Enabling NordVPN daemon..."
-sudo systemctl enable --now nordvpnd
-
-echo "Adding user to nordvpn group..."
-sudo usermod -aG nordvpn "$USER"
-
-echo -e "\nNordVPN installed! After reboot, run 'nordvpn login' to authenticate."
-
-echo
-gum confirm "Reboot now to make NordVPN usable?" && omarchy-system-reboot

bin/omarchy-install-once

@@ -1,12 +0,0 @@
-#!/bin/bash
-
-# Install the ONCE service, enable its background service, and launch the TUI.
-
-echo "Installing ONCE..."
-omarchy-pkg-add once-bin
-
-echo "Enabling ONCE background service..."
-sudo systemctl enable --now once-background.service
-
-echo -e "\nLaunching ONCE..."
-once

bin/omarchy-install-steam

@@ -1,9 +1,5 @@
 #!/bin/bash
 
-# Install and launch Steam after first letting the user pick the correct grahics card drivers.
-
-set -e
-
 echo "Now pick dependencies matching your graphics card"
-sudo pacman -S steam
+sudo pacman -Syu --noconfirm steam
 setsid gtk-launch steam >/dev/null 2>&1 &

bin/omarchy-install-tailscale

@@ -1,12 +1,13 @@
 #!/bin/bash
 
-# Install the Tailscale mesh VPN service and a web app for the Tailscale Admin Console.
-
-echo -e "\nInstalling Tailscale..."
-omarchy-pkg-add tailscale
+curl -fsSL https://tailscale.com/install.sh | sh
+curl -fsSL https://neuralink.com/tsui/install.sh | bash
 
 echo -e "\nStarting Tailscale..."
-sudo systemctl enable --now tailscaled.service
 sudo tailscale up --accept-routes
 
-omarchy-webapp-install "Tailscale" "https://login.tailscale.com/admin/machines" https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png
+echo -e "\nAdd tsui to sudoers..."
+echo "$USER ALL=(ALL) NOPASSWD: $(which tsui)" | sudo tee /etc/sudoers.d/tsui
+
+omarchy-tui-install "Tailscale" "sudo tsui" float https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png
+omarchy-webapp-install "Tailscale Admin Console" "https://login.tailscale.com/admin/machines" https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png

bin/omarchy-install-terminal

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-# Install one of the approved terminals and set it as the default for Omarchy (Super + Return etc).
-
 if (($# == 0)); then
   echo "Usage: omarchy-install-terminal [alacritty|ghostty|kitty]"
   exit 1
@@ -11,25 +9,35 @@ package="$1"
 
 # Map package name to desktop entry ID
 case "$package" in
-alacritty) desktop_id="Alacritty.desktop" ;;
-ghostty) desktop_id="com.mitchellh.ghostty.desktop" ;;
-kitty) desktop_id="kitty.desktop" ;;
-*)
-  echo "Unknown terminal: $package"
-  exit 1
-  ;;
+  alacritty)
+    desktop_id="Alacritty.desktop"
+    ;;
+  ghostty)
+    desktop_id="com.mitchellh.ghostty.desktop"
+    ;;
+  kitty)
+    desktop_id="kitty.desktop"
+    ;;
+  *)
+    echo "Unknown terminal: $package"
+    exit 1
+    ;;
 esac
 
 # Install package
 if omarchy-pkg-add $package; then
+  # Set as default terminal
+  echo "Setting $package as new default terminal..."
+  sed -i "/export TERMINAL=/ c\export TERMINAL=$package" ~/.config/uwsm/default
+
   # Copy custom desktop entry for alacritty with X-TerminalArg* keys
-  if [[ $package == "alacritty" ]]; then
+  if [ "$package" = "alacritty" ]; then
     mkdir -p ~/.local/share/applications
-    cp $OMARCHY_PATH/applications/Alacritty.desktop ~/.local/share/applications/
+    cp "$OMARCHY_PATH/applications/Alacritty.desktop" ~/.local/share/applications/
   fi
 
   # Update xdg-terminals.list to prioritize the proper terminal
-  cat >~/.config/xdg-terminals.list <<EOF
+  cat > ~/.config/xdg-terminals.list << EOF
 # Terminal emulator preference order for xdg-terminal-exec
 # The first found and valid terminal will be used
 $desktop_id

bin/omarchy-install-vscode

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-# Install VSCode and configure it to use the gnome-libsecret password store, not to update automatically, and to use the current Omarchy theme.
-
 echo "Installing VSCode..."
 omarchy-pkg-add visual-studio-code-bin
 

bin/omarchy-install-xbox-controllers

@@ -1,19 +0,0 @@
-#!/bin/bash
-
-# Install support for using Xbox controllers with Steam/RetroArch/etc.
-
-set -e
-
-# Install xpadneo to ensure controllers work out of the box
-omarchy-pkg-add linux-headers
-omarchy-pkg-aur-add xpadneo-dkms
-
-# Prevent xpad/xpadneo driver conflict
-echo blacklist xpad | sudo tee /etc/modprobe.d/blacklist-xpad.conf >/dev/null
-echo hid_xpadneo | sudo tee /etc/modules-load.d/xpadneo.conf >/dev/null
-
-# Give user access to game controllers
-sudo usermod -a -G input $USER
-
-# Modules need to be loaded
-gum confirm "Install requires reboot. Ready?" && sudo reboot now

bin/omarchy-launch-about

@@ -1,5 +1,3 @@
 #!/bin/bash
 
-# Launch the fastfetch TUI that gives information about the current system.
-
-exec omarchy-launch-or-focus-tui "bash -c 'fastfetch; read -n 1 -s'"
+exec setsid uwsm-app -- xdg-terminal-exec --app-id=com.omarchy.Omarchy -e bash -c 'fastfetch; read -n 1 -s'

bin/omarchy-launch-audio

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Launch the Omarchy audio controls TUI (provided by wiremix).
-
-omarchy-launch-or-focus-tui wiremix

bin/omarchy-launch-bluetooth

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Launch the Omarchy bluetooth controls TUI (provided by bluetui).
-# Also attempts to unblock bluetooth service if rfkill had blocked it.
-
-rfkill unblock bluetooth
-exec omarchy-launch-or-focus-tui bluetui

bin/omarchy-launch-browser

@@ -1,15 +1,10 @@
 #!/bin/bash
 
-# Launch the default browser as determined by xdg-settings.
-# Automatically converts --private into the correct flag for the given browser.
-
 default_browser=$(xdg-settings get default-web-browser)
 browser_exec=$(sed -n 's/^Exec=\([^ ]*\).*/\1/p' {~/.local,~/.nix-profile,/usr}/share/applications/$default_browser 2>/dev/null | head -1)
 
-if $browser_exec --help | grep -q MOZ_LOG; then
+if [[ $browser_exec =~ (firefox|zen|librewolf) ]]; then
   private_flag="--private-window"
-elif [[ $browser_exec =~ edge ]]; then
-  private_flag="--inprivate"
 else
   private_flag="--incognito"
 fi

bin/omarchy-launch-editor

@@ -1,13 +1,10 @@
 #!/bin/bash
 
-# Launch the default editor as determined by $EDITOR (set via ~/.config/uwsm/default) (or nvim if missing).
-# Starts suitable editors in a terminal window and otherwise as a regular application.
-
 omarchy-cmd-present "$EDITOR" || EDITOR=nvim
 
 case "$EDITOR" in
-nvim | vim | nano | micro | hx | helix | fresh)
-  exec omarchy-launch-tui "$EDITOR" "$@"
+nvim | vim | nano | micro | hx | helix)
+  exec setsid uwsm-app -- xdg-terminal-exec "$EDITOR" "$@"
   ;;
 *)
   exec setsid uwsm-app -- "$EDITOR" "$@"

bin/omarchy-launch-floating-terminal-with-presentation

@@ -1,7 +1,4 @@
 #!/bin/bash
 
-# Launch a floating terminal with the Omarchy logo presentation, then execute the command passed in, and finally end with the omarchy-show-done presentation.
-# Used by actions such as Update System.
-
 cmd="$*"
-exec setsid uwsm-app -- xdg-terminal-exec --app-id=org.omarchy.terminal --title=Omarchy -e bash -c "omarchy-show-logo; $cmd; if (( \$? != 130 )); then omarchy-show-done; fi"
+exec setsid uwsm-app -- xdg-terminal-exec --app-id=com.omarchy.Omarchy --title=Omarchy -e bash -c "omarchy-show-logo; $cmd; omarchy-show-done"

bin/omarchy-launch-or-focus

@@ -1,8 +1,5 @@
 #!/bin/bash
 
-# Launch or focus on a given command identified by the passed in window-pattern.
-# Use by some default bindings, like the one for Spotify, to ensure there is only one instance of the application open.
-
 if (($# == 0)); then
   echo "Usage: omarchy-launch-or-focus [window-pattern] [launch-command]"
   exit 1
@@ -15,5 +12,5 @@ WINDOW_ADDRESS=$(hyprctl clients -j | jq -r --arg p "$WINDOW_PATTERN" '.[]|selec
 if [[ -n $WINDOW_ADDRESS ]]; then
   hyprctl dispatch focuswindow "address:$WINDOW_ADDRESS"
 else
-  eval exec setsid $LAUNCH_COMMAND
+  eval exec $LAUNCH_COMMAND
 fi

bin/omarchy-launch-or-focus-tui

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Launch or focus on a given TUI identified by the passed in as the command.
-# Use by commands like omarchy-launch-wifi to ensure there is only one wifi configuration screen open.
-
-APP_ID="org.omarchy.$(basename "$1")"
-LAUNCH_COMMAND="omarchy-launch-tui $@"
-
-exec omarchy-launch-or-focus "$APP_ID" "$LAUNCH_COMMAND"

bin/omarchy-launch-or-focus-webapp

@@ -1,8 +1,5 @@
 #!/bin/bash
 
-# Launch or focus on a given web app identified by the window-pattern.
-# Use by some default bindings, like the one for WhatsApp, to ensure there is only one instance of the application open.
-
 if (($# == 0)); then
   echo "Usage: omarchy-launch-or-focus-webapp [window-pattern] [url-and-flags...]"
   exit 1
@@ -12,4 +9,4 @@ WINDOW_PATTERN="$1"
 shift
 LAUNCH_COMMAND="omarchy-launch-webapp $@"
 
-exec omarchy-launch-or-focus "$WINDOW_PATTERN" "$LAUNCH_COMMAND"
+exec omarchy-launch-or-focus "$WINDOW_PATTERN" "$LAUNCH_COMMAND"

bin/omarchy-launch-screensaver

@@ -1,54 +1,28 @@
 #!/bin/bash
 
-# Launch the Omarchy screensaver in the default terminal on the system with the correct font configuration.
-
 # Exit early if we don't have the tte show
 if ! command -v tte &>/dev/null; then
   exit 1
 fi
 
 # Exit early if screensave is already running
-pgrep -f org.omarchy.screensaver && exit 0
+pgrep -f "alacritty --class Screensaver" && exit 0
 
 # Allow screensaver to be turned off but also force started
-if omarchy-toggle-enabled screensaver-off && [[ $1 != "force" ]]; then
+if [[ -f ~/.local/state/omarchy/toggles/screensaver-off ]] && [[ $1 != "force" ]]; then
   exit 1
 fi
 
-# Silently quit Walker on overlay
-walker -q
-
-focused=$(omarchy-hyprland-monitor-focused)
-terminal=$(xdg-terminal-exec --print-id)
+focused=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')
 
 for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
   hyprctl dispatch focusmonitor $m
 
-  case $terminal in
-  *Alacritty*)
-    hyprctl dispatch exec -- \
-      alacritty --class=org.omarchy.screensaver \
-      --config-file ~/.local/share/omarchy/default/alacritty/screensaver.toml \
-      -e omarchy-cmd-screensaver
-    ;;
-  *ghostty*)
-    hyprctl dispatch exec -- \
-      ghostty --class=org.omarchy.screensaver \
-      --config-file=~/.local/share/omarchy/default/ghostty/screensaver \
-      --font-size=18 \
-      -e omarchy-cmd-screensaver
-    ;;
-  *kitty*)
-    hyprctl dispatch exec -- \
-      kitty --class=org.omarchy.screensaver \
-      --override font_size=18 \
-      --override window_padding_width=0 \
-      -e omarchy-cmd-screensaver
-    ;;
-  *)
-    notify-send -u low "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
-    ;;
-  esac
+  # FIXME: Find a way to make this generic where we it can work for kitty + ghostty
+  hyprctl dispatch exec -- \
+    alacritty --class Screensaver \
+    --config-file ~/.local/share/omarchy/default/alacritty/screensaver.toml \
+    -e omarchy-cmd-screensaver
 done
 
 hyprctl dispatch focusmonitor $focused

bin/omarchy-launch-tui

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Launch the TUI command passed in as an argument in the default terminal with an org.omarchy.COMMAND app id for styling.
-
-exec setsid uwsm-app -- xdg-terminal-exec --app-id=org.omarchy.$(basename $1) -e "$1" "${@:2}"

bin/omarchy-launch-walker

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-# Launch the Walker application launcher while ensuring that it's data provider (called elephant) is running first.
-
 # Ensure elephant is running before launching walker
 if ! pgrep -x elephant > /dev/null; then
   setsid uwsm-app -- elephant &
@@ -9,7 +7,7 @@ fi
 
 # Ensure walker service is running
 if ! pgrep -f "walker --gapplication-service" > /dev/null; then
-  setsid uwsm-app -- env GSK_RENDERER=cairo walker --gapplication-service &
+  setsid uwsm-app -- walker --gapplication-service &
 fi
 
 exec walker --width 644 --maxheight 300 --minheight 300 "$@"

bin/omarchy-launch-webapp

@@ -1,11 +1,9 @@
 #!/bin/bash
 
-# Launch the passed in URL as a web app in the default browser (or chromium if the default doesn't support --app).
-
 browser=$(xdg-settings get default-web-browser)
 
 case $browser in
-google-chrome* | brave* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
+google-chrome* | brave-browser* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
 *) browser="chromium.desktop" ;;
 esac
 

bin/omarchy-launch-wifi

@@ -1,7 +1,3 @@
 #!/bin/bash
 
-# Launch the Omarchy wifi controls (provided by the Impala TUI).
-# Attempts to unblock the wifi service first in case it should be been blocked.
-
-rfkill unblock wifi
-omarchy-launch-or-focus-tui impala
+exec setsid uwsm-app -- xdg-terminal-exec --app-id=com.omarchy.Impala -e impala "$@"

bin/omarchy-lock-screen

@@ -1,17 +1,12 @@
 #!/bin/bash
 
-# Locks the system using hyprlock, but not before ensuring 1password has also been locked, and the screensaver stopped.
-
 # Lock the screen
 pidof hyprlock || hyprlock &
 
-# Set keyboard layout to default (first layout)
-hyprctl switchxkblayout all 0 > /dev/null 2>&1
-
 # Ensure 1password is locked
 if pgrep -x "1password" >/dev/null; then
   1password --lock &
 fi
 
 # Avoid running screensaver when locked
-pkill -f org.omarchy.screensaver
+pkill -f "alacritty --class Screensaver"

bin/omarchy-menu

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-# Launch the Omarchy Menu or takes a parameter to jump straight to a submenu.
-
 export PATH="$HOME/.local/share/omarchy/bin:$PATH"
 
 # Set to true when going directly to a submenu, so we can exit directly
@@ -10,22 +8,15 @@ BACK_TO_EXIT=false
 back_to() {
   local parent_menu="$1"
 
-  if [[ $BACK_TO_EXIT == "true" ]]; then
+  if [[ "$BACK_TO_EXIT" == "true" ]]; then
     exit 0
-  elif [[ -n $parent_menu ]]; then
+  elif [[ -n "$parent_menu" ]]; then
     "$parent_menu"
   else
     show_main_menu
   fi
 }
 
-toggle_existing_menu() {
-  if pgrep -f "walker.*--dmenu" >/dev/null; then
-    walker --close >/dev/null 2>&1
-    exit 0
-  fi
-}
-
 menu() {
   local prompt="$1"
   local options="$2"
@@ -34,19 +25,19 @@ menu() {
 
   read -r -a args <<<"$extra"
 
-  if [[ -n $preselect ]]; then
+  if [[ -n "$preselect" ]]; then
     local index
     index=$(echo -e "$options" | grep -nxF "$preselect" | cut -d: -f1)
-    if [[ -n $index ]]; then
+    if [[ -n "$index" ]]; then
       args+=("-c" "$index")
     fi
   fi
 
-  echo -e "$options" | omarchy-launch-walker --dmenu --width 295 --minheight 1 --maxheight 630 -p "$prompt…" "${args[@]}" 2>/dev/null
+  echo -e "$options" | omarchy-launch-walker --dmenu --width 295 --minheight 1 --maxheight 600 -p "$prompt…" "${args[@]}" 2>/dev/null
 }
 
 terminal() {
-  xdg-terminal-exec --app-id=org.omarchy.terminal "$@"
+  xdg-terminal-exec --app-id=com.omarchy.Omarchy "$@"
 }
 
 present_terminal() {
@@ -54,20 +45,20 @@ present_terminal() {
 }
 
 open_in_editor() {
-  notify-send -u low "Editing config file" "$1"
+  notify-send "Editing config file" "$1"
   omarchy-launch-editor "$1"
 }
 
 install() {
-  present_terminal "echo 'Installing $1...'; omarchy-pkg-add $2"
+  present_terminal "echo 'Installing $1...'; sudo pacman -S --noconfirm $2"
 }
 
 install_and_launch() {
-  present_terminal "echo 'Installing $1...'; omarchy-pkg-add $2 && setsid gtk-launch $3"
+  present_terminal "echo 'Installing $1...'; sudo pacman -S --noconfirm $2 && setsid gtk-launch $3"
 }
 
 install_font() {
-  present_terminal "echo 'Installing $1...'; omarchy-pkg-add $2 && sleep 2 && omarchy-font-set '$3'"
+  present_terminal "echo 'Installing $1...'; sudo pacman -S --noconfirm --needed $2 && sleep 2 && omarchy-font-set '$3'"
 }
 
 install_terminal() {
@@ -75,11 +66,11 @@ install_terminal() {
 }
 
 aur_install() {
-  present_terminal "echo 'Installing $1 from AUR...'; omarchy-pkg-aur-add $2"
+  present_terminal "echo 'Installing $1 from AUR...'; yay -S --noconfirm $2"
 }
 
 aur_install_and_launch() {
-  present_terminal "echo 'Installing $1 from AUR...'; omarchy-pkg-aur-add $2 && setsid gtk-launch $3"
+  present_terminal "echo 'Installing $1 from AUR...'; yay -S --noconfirm $2 && setsid gtk-launch $3"
 }
 
 show_learn_menu() {
@@ -95,72 +86,45 @@ show_learn_menu() {
 }
 
 show_trigger_menu() {
-  case $(menu "Trigger" "  Capture\n  Share\n󰔎  Toggle\n  Hardware") in
+  case $(menu "Trigger" "  Capture\n  Share\n󰔎  Toggle") in
   *Capture*) show_capture_menu ;;
   *Share*) show_share_menu ;;
   *Toggle*) show_toggle_menu ;;
-  *Hardware*) show_hardware_menu ;;
   *) show_main_menu ;;
   esac
 }
 
 show_capture_menu() {
   case $(menu "Capture" "  Screenshot\n  Screenrecord\n󰃉  Color") in
-  *Screenshot*) omarchy-cmd-screenshot ;;
+  *Screenshot*) show_screenshot_menu ;;
   *Screenrecord*) show_screenrecord_menu ;;
   *Color*) pkill hyprpicker || hyprpicker -a ;;
-  *) back_to show_trigger_menu ;;
+  *) show_trigger_menu ;;
   esac
 }
 
-get_webcam_list() {
-  v4l2-ctl --list-devices 2>/dev/null | while IFS= read -r line; do
-    if [[ $line != $'\t'* && -n $line ]]; then
-      local name="$line"
-      IFS= read -r device || break
-      device=$(echo "$device" | tr -d '\t' | head -1)
-      [[ -n $device ]] && echo "$device  $name"
-    fi
-  done
-}
-
-show_webcam_select_menu() {
-  local devices=$(get_webcam_list)
-  local count=$(echo "$devices" | grep -c . 2>/dev/null || echo 0)
-
-  if [[ -z $devices ]] || ((count == 0)); then
-    notify-send "No webcam devices found" -u critical -t 3000
-    return 1
-  fi
-
-  if ((count == 1)); then
-    echo "$devices" | awk '{print $1}'
-  else
-    menu "Select Webcam" "$devices" | awk '{print $1}'
-  fi
+show_screenshot_menu() {
+  case $(menu "Screenshot" "  Snap with Editing\n  Straight to Clipboard") in
+  *Editing*) omarchy-cmd-screenshot smart ;;
+  *Clipboard*) omarchy-cmd-screenshot smart clipboard ;;
+  *) show_capture_menu ;;
+  esac
 }
 
 show_screenrecord_menu() {
-  omarchy-cmd-screenrecord --stop-recording && exit 0
-
-  case $(menu "Screenrecord" "  With no audio\n  With desktop audio\n  With desktop + microphone audio\n  With desktop + microphone audio + webcam") in
-  *"With no audio") omarchy-cmd-screenrecord ;;
-  *"With desktop audio") omarchy-cmd-screenrecord --with-desktop-audio ;;
-  *"With desktop + microphone audio") omarchy-cmd-screenrecord --with-desktop-audio --with-microphone-audio ;;
-  *"With desktop + microphone audio + webcam")
-    local device=$(show_webcam_select_menu) || {
-      back_to show_capture_menu
-      return
-    }
-    omarchy-cmd-screenrecord --with-desktop-audio --with-microphone-audio --with-webcam --webcam-device="$device"
-    ;;
+  case $(menu "Screenrecord" "  Region\n  Region + Audio\n  Display\n  Display + Audio\n  Display + Webcam") in
+  *"Region + Audio"*) omarchy-cmd-screenrecord region --with-audio ;;
+  *Region*) omarchy-cmd-screenrecord ;;
+  *"Display + Audio"*) omarchy-cmd-screenrecord output --with-audio ;;
+  *"Display + Webcam"*) omarchy-cmd-screenrecord output --with-audio --with-webcam ;;
+  *Display*) omarchy-cmd-screenrecord output ;;
   *) back_to show_capture_menu ;;
   esac
 }
 
 show_share_menu() {
   case $(menu "Share" "  Clipboard\n  File \n  Folder") in
-  *Clipboard*) omarchy-cmd-share clipboard ;;
+  *Clipboard*) terminal bash -c "omarchy-cmd-share clipboard" ;;
   *File*) terminal bash -c "omarchy-cmd-share file" ;;
   *Folder*) terminal bash -c "omarchy-cmd-share folder" ;;
   *) back_to show_trigger_menu ;;
@@ -168,37 +132,12 @@ show_share_menu() {
 }
 
 show_toggle_menu() {
-  local options="󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Monitor Scaling\n"
-
-  case $(menu "Toggle" "$options") in
+  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar") in
   *Screensaver*) omarchy-toggle-screensaver ;;
   *Nightlight*) omarchy-toggle-nightlight ;;
   *Idle*) omarchy-toggle-idle ;;
   *Bar*) omarchy-toggle-waybar ;;
-  *Layout*) omarchy-hyprland-workspace-layout-toggle ;;
-  *Ratio*) omarchy-hyprland-window-single-square-aspect-toggle ;;
-  *Gaps*) omarchy-hyprland-window-gaps-toggle ;;
-  *Scaling*) omarchy-hyprland-monitor-scaling-cycle ;;
-  *) back_to show_trigger_menu ;;
-  esac
-}
-
-show_hardware_menu() {
-  local options="󰛧  Laptop Display"
-
-  if omarchy-hw-hybrid-gpu; then
-    options="$options\n  Hybrid GPU"
-  fi
-
-  if omarchy-hw-touchpad; then
-    options="$options\n󰟸  Touchpad"
-  fi
-
-  case $(menu "Toggle" "$options") in
-  *Laptop*) omarchy-hyprland-monitor-internal toggle ;;
-  *Touchpad*) omarchy-toggle-touchpad ;;
-  *"Hybrid GPU"*) present_terminal omarchy-toggle-hybrid-gpu ;;
-  *) back_to show_trigger_menu ;;
+  *) show_trigger_menu ;;
   esac
 }
 
@@ -206,7 +145,7 @@ show_style_menu() {
   case $(menu "Style" "󰸌  Theme\n  Font\n  Background\n  Hyprland\n󱄄  Screensaver\n  About") in
   *Theme*) show_theme_menu ;;
   *Font*) show_font_menu ;;
-  *Background*) show_background_menu ;;
+  *Background*) omarchy-theme-bg-next ;;
   *Hyprland*) open_in_editor ~/.config/hypr/looknfeel.conf ;;
   *Screensaver*) open_in_editor ~/.config/omarchy/branding/screensaver.txt ;;
   *About*) open_in_editor ~/.config/omarchy/branding/about.txt ;;
@@ -215,16 +154,17 @@ show_style_menu() {
 }
 
 show_theme_menu() {
-  omarchy-launch-walker -m menus:omarchythemes --width 800 --minheight 400
-}
-
-show_background_menu() {
-  omarchy-launch-walker -m menus:omarchyBackgroundSelector --width 800 --minheight 400
+  theme=$(menu "Theme" "$(omarchy-theme-list)" "" "$(omarchy-theme-current)")
+  if [[ "$theme" == "CNCLD" || -z "$theme" ]]; then
+    back_to show_style_menu
+  else
+    omarchy-theme-set "$theme"
+  fi
 }
 
 show_font_menu() {
   theme=$(menu "Font" "$(omarchy-font-list)" "--width 350" "$(omarchy-font-current)")
-  if [[ $theme == "CNCLD" || -z $theme ]]; then
+  if [[ "$theme" == "CNCLD" || -z "$theme" ]]; then
     back_to show_style_menu
   else
     omarchy-font-set "$theme"
@@ -232,20 +172,26 @@ show_font_menu() {
 }
 
 show_setup_menu() {
-  local options="  Audio\n  Wifi\n󰂯  Bluetooth\n󱐋  Power Profile\n  System Sleep\n󰍹  Monitors"
-  [[ -f ~/.config/hypr/bindings.conf ]] && options="$options\n  Keybindings"
-  [[ -f ~/.config/hypr/input.conf ]] && options="$options\n  Input"
-  options="$options\n󰱔  DNS\n  Security\n  Config"
+  local options="  Audio\n  Wifi\n󰂯  Bluetooth\n󱐋  Power Profile\n󰍹  Monitors"
+  [ -f ~/.config/hypr/bindings.conf ] && options="$options\n  Keybindings"
+  [ -f ~/.config/hypr/input.conf ] && options="$options\n  Input"
+  options="$options\n  Defaults\n󰱔  DNS\n  Security\n  Config"
 
   case $(menu "Setup" "$options") in
-  *Audio*) omarchy-launch-audio ;;
-  *Wifi*) omarchy-launch-wifi ;;
-  *Bluetooth*) omarchy-launch-bluetooth ;;
+  *Audio*) xdg-terminal-exec --app-id=com.omarchy.Wiremix -e wiremix ;;
+  *Wifi*)
+    rfkill unblock wifi
+    omarchy-launch-wifi
+    ;;
+  *Bluetooth*)
+    rfkill unblock bluetooth
+    blueberry
+    ;;
   *Power*) show_setup_power_menu ;;
-  *System*) show_setup_system_menu ;;
   *Monitors*) open_in_editor ~/.config/hypr/monitors.conf ;;
   *Keybindings*) open_in_editor ~/.config/hypr/bindings.conf ;;
   *Input*) open_in_editor ~/.config/hypr/input.conf ;;
+  *Defaults*) open_in_editor ~/.config/uwsm/default ;;
   *DNS*) present_terminal omarchy-setup-dns ;;
   *Security*) show_setup_security_menu ;;
   *Config*) show_setup_config_menu ;;
@@ -256,24 +202,15 @@ show_setup_menu() {
 show_setup_power_menu() {
   profile=$(menu "Power Profile" "$(omarchy-powerprofiles-list)" "" "$(powerprofilesctl get)")
 
-  if [[ $profile == "CNCLD" || -z $profile ]]; then
+  if [[ "$profile" == "CNCLD" || -z "$profile" ]]; then
     back_to show_setup_menu
   else
     powerprofilesctl set "$profile"
   fi
 }
 
-show_setup_security_menu() {
-  case $(menu "Setup" "󰈷  Fingerprint\n  Fido2") in
-  *Fingerprint*) present_terminal omarchy-setup-fingerprint ;;
-  *Fido2*) present_terminal omarchy-setup-fido2 ;;
-  *) show_setup_menu ;;
-  esac
-}
-
 show_setup_config_menu() {
-  case $(menu "Setup" "  Defaults\n  Hyprland\n  Hypridle\n  Hyprlock\n  Hyprsunset\n  Swayosd\n󰌧  Walker\n󰍜  Waybar\n󰞅  XCompose") in
-  *Defaults*) open_in_editor ~/.config/uwsm/default ;;
+  case $(menu "Setup" "  Hyprland\n  Hypridle\n  Hyprlock\n  Hyprsunset\n  Swayosd\n󰌧  Walker\n󰍜  Waybar\n󰞅  XCompose") in
   *Hyprland*) open_in_editor ~/.config/hypr/hyprland.conf ;;
   *Hypridle*) open_in_editor ~/.config/hypr/hypridle.conf && omarchy-restart-hypridle ;;
   *Hyprlock*) open_in_editor ~/.config/hypr/hyprlock.conf ;;
@@ -282,29 +219,14 @@ show_setup_config_menu() {
   *Walker*) open_in_editor ~/.config/walker/config.toml && omarchy-restart-walker ;;
   *Waybar*) open_in_editor ~/.config/waybar/config.jsonc && omarchy-restart-waybar ;;
   *XCompose*) open_in_editor ~/.XCompose && omarchy-restart-xcompose ;;
-  *) show_setup_menu ;;
+  *) show_main_menu ;;
   esac
 }
 
-show_setup_system_menu() {
-  local options=""
-
-  if omarchy-toggle-enabled suspend-off; then
-    options="$options󰒲  Enable Suspend"
-  else
-    options="$options󰒲  Disable Suspend"
-  fi
-
-  if omarchy-hibernation-available; then
-    options="$options\n󰤁  Disable Hibernate"
-  else
-    options="$options\n󰤁  Enable Hibernate"
-  fi
-
-  case $(menu "System" "$options") in
-  *Suspend*) omarchy-toggle-suspend ;;
-  *"Enable Hibernate"*) present_terminal omarchy-hibernation-setup ;;
-  *"Disable Hibernate"*) present_terminal omarchy-hibernation-remove ;;
+show_setup_security_menu() {
+  case $(menu "Setup" "󰈷  Fingerprint\n  Fido2") in
+  *Fingerprint*) present_terminal omarchy-setup-fingerprint ;;
+  *Fido2*) present_terminal omarchy-setup-fido2 ;;
   *) show_setup_menu ;;
   esac
 }
@@ -328,11 +250,9 @@ show_install_menu() {
 }
 
 show_install_service_menu() {
-  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN [AUR]\n󰏖  ONCE\n󰟵  Bitwarden\n  Chromium Account") in
+  case $(menu "Install" "  Dropbox\n  Tailscale\n󰟵  Bitwarden\n  Chromium Account") in
   *Dropbox*) present_terminal omarchy-install-dropbox ;;
   *Tailscale*) present_terminal omarchy-install-tailscale ;;
-  *NordVPN*) present_terminal omarchy-install-nordvpn ;;
-  *ONCE*) present_terminal omarchy-install-once ;;
   *Bitwarden*) install_and_launch "Bitwarden" "bitwarden bitwarden-cli" "bitwarden" ;;
   *Chromium*) present_terminal omarchy-install-chromium-google-account ;;
   *) show_install_menu ;;
@@ -367,22 +287,24 @@ show_install_ai_menu() {
       echo ollama
   )
 
-  case $(menu "Install" "  Dictation\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
-  *Dictation*) present_terminal omarchy-voxtype-install ;;
-  *Studio*) install "LM Studio" "lmstudio-bin" ;;
+  case $(menu "Install" "󱚤  Claude Code\n󱚤  Cursor CLI\n󱚤  Gemini\n󱚤  OpenAI Codex\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush\n󱚤  opencode") in
+  *Claude*) install "Claude Code" "claude-code" ;;
+  *Cursor*) install "Cursor CLI" "cursor-cli" ;;
+  *OpenAI*) install "OpenAI Codex" "openai-codex-bin" ;;
+  *Gemini*) install "Gemini" "gemini-cli" ;;
+  *Studio*) install "LM Studio" "lmstudio" ;;
   *Ollama*) install "Ollama" $ollama_pkg ;;
   *Crush*) install "Crush" "crush-bin" ;;
+  *opencode*) install "opencode" "opencode" ;;
   *) show_install_menu ;;
   esac
 }
 
 show_install_gaming_menu() {
-  case $(menu "Install" "  Steam\n󰢹  NVIDIA GeForce NOW\n  RetroArch [AUR]\n󰍳  Minecraft\n󰖺  Xbox Controller [AUR]") in
+  case $(menu "Install" "  Steam\n  RetroArch [AUR]\n󰍳  Minecraft") in
   *Steam*) present_terminal omarchy-install-steam ;;
-  *GeForce*) present_terminal omarchy-install-geforce-now ;;
   *RetroArch*) aur_install_and_launch "RetroArch" "retroarch retroarch-assets libretro libretro-fbneo" "com.libretro.RetroArch.desktop" ;;
   *Minecraft*) install_and_launch "Minecraft" "minecraft-launcher" "minecraft-launcher" ;;
-  *Xbox*) present_terminal omarchy-install-xbox-controllers ;;
   *) show_install_menu ;;
   esac
 }
@@ -390,26 +312,24 @@ show_install_gaming_menu() {
 show_install_style_menu() {
   case $(menu "Install" "󰸌  Theme\n  Background\n  Font") in
   *Theme*) present_terminal omarchy-theme-install ;;
-  *Background*) omarchy-theme-bg-install ;;
+  *Background*) nautilus ~/.config/omarchy/current/theme/backgrounds ;;
   *Font*) show_install_font_menu ;;
   *) show_install_menu ;;
   esac
 }
 
 show_install_font_menu() {
-  case $(menu "Install" "  Cascadia Mono\n  Meslo LG Mono\n  Fira Code\n  Victor Code\n  Bistream Vera Mono\n  Iosevka" "--width 350") in
-  *Cascadia*) install_font "Cascadia Mono" "ttf-cascadia-mono-nerd" "CaskaydiaMono Nerd Font" ;;
+  case $(menu "Install" "  Meslo LG Mono\n  Fira Code\n  Victor Code\n  Bistream Vera Mono" "--width 350") in
   *Meslo*) install_font "Meslo LG Mono" "ttf-meslo-nerd" "MesloLGL Nerd Font" ;;
   *Fira*) install_font "Fira Code" "ttf-firacode-nerd" "FiraCode Nerd Font" ;;
   *Victor*) install_font "Victor Code" "ttf-victor-mono-nerd" "VictorMono Nerd Font" ;;
   *Bistream*) install_font "Bistream Vera Code" "ttf-bitstream-vera-mono-nerd" "BitstromWera Nerd Font" ;;
-  *Iosevka*) install_font "Iosevka" "ttf-iosevka-nerd" "Iosevka Nerd Font Mono" ;;
   *) show_install_menu ;;
   esac
 }
 
 show_install_development_menu() {
-  case $(menu "Install" "󰫏  Ruby on Rails\n  Docker DB\n  JavaScript\n  Go\n  PHP\n  Python\n  Elixir\n  Zig\n  Rust\n  Java\n  .NET\n  OCaml\n  Clojure\n  Scala") in
+  case $(menu "Install" "󰫏  Ruby on Rails\n  Docker DB\n  JavaScript\n  Go\n  PHP\n  Python\n  Elixir\n  Zig\n  Rust\n  Java\n  .NET\n  OCaml\n  Clojure") in
   *Rails*) present_terminal "omarchy-install-dev-env ruby" ;;
   *Docker*) present_terminal omarchy-install-docker-dbs ;;
   *JavaScript*) show_install_javascript_menu ;;
@@ -423,7 +343,6 @@ show_install_development_menu() {
   *NET*) present_terminal "omarchy-install-dev-env dotnet" ;;
   *OCaml*) present_terminal "omarchy-install-dev-env ocaml" ;;
   *Clojure*) present_terminal "omarchy-install-dev-env clojure" ;;
-  *Scala*) present_terminal "omarchy-install-dev-env scala" ;;
   *) show_install_menu ;;
   esac
 }
@@ -455,13 +374,10 @@ show_install_elixir_menu() {
 }
 
 show_remove_menu() {
-  case $(menu "Remove" "󰣇  Package\n  Web App\n  TUI\n󰵮  Development\n󰏓  Preinstalls\n  Dictation\n󰸌  Theme\n󰍲  Windows\n󰈷  Fingerprint\n  Fido2") in
+  case $(menu "Remove" "󰣇  Package\n  Web App\n  TUI\n󰸌  Theme\n󰍲  Windows\n󰈷  Fingerprint\n  Fido2") in
   *Package*) terminal omarchy-pkg-remove ;;
   *Web*) present_terminal omarchy-webapp-remove ;;
   *TUI*) present_terminal omarchy-tui-remove ;;
-  *Development*) show_remove_development_menu ;;
-  *Preinstalls*) present_terminal omarchy-remove-preinstalls ;;
-  *Dictation*) present_terminal omarchy-voxtype-remove ;;
   *Theme*) present_terminal omarchy-theme-remove ;;
   *Windows*) present_terminal "omarchy-windows-vm remove" ;;
   *Fingerprint*) present_terminal "omarchy-setup-fingerprint --remove" ;;
@@ -470,55 +386,9 @@ show_remove_menu() {
   esac
 }
 
-show_remove_development_menu() {
-  case $(menu "Remove" "󰫏  Ruby on Rails\n  JavaScript\n  Go\n  PHP\n  Python\n  Elixir\n  Zig\n  Rust\n  Java\n  .NET\n  OCaml\n  Clojure\n  Scala") in
-  *Rails*) present_terminal "omarchy-remove-dev-env ruby" ;;
-  *JavaScript*) show_remove_javascript_menu ;;
-  *Go*) present_terminal "omarchy-remove-dev-env go" ;;
-  *PHP*) show_remove_php_menu ;;
-  *Python*) present_terminal "omarchy-remove-dev-env python" ;;
-  *Elixir*) show_remove_elixir_menu ;;
-  *Zig*) present_terminal "omarchy-remove-dev-env zig" ;;
-  *Rust*) present_terminal "omarchy-remove-dev-env rust" ;;
-  *Java*) present_terminal "omarchy-remove-dev-env java" ;;
-  *NET*) present_terminal "omarchy-remove-dev-env dotnet" ;;
-  *OCaml*) present_terminal "omarchy-remove-dev-env ocaml" ;;
-  *Clojure*) present_terminal "omarchy-remove-dev-env clojure" ;;
-  *Scala*) present_terminal "omarchy-remove-dev-env scala" ;;
-  *) show_remove_menu ;;
-  esac
-}
-
-show_remove_javascript_menu() {
-  case $(menu "Remove" "  Node.js\n  Bun\n  Deno") in
-  *Node*) present_terminal "omarchy-remove-dev-env node" ;;
-  *Bun*) present_terminal "omarchy-remove-dev-env bun" ;;
-  *Deno*) present_terminal "omarchy-remove-dev-env deno" ;;
-  *) show_remove_development_menu ;;
-  esac
-}
-
-show_remove_php_menu() {
-  case $(menu "Remove" "  PHP\n  Laravel\n  Symfony") in
-  *PHP*) present_terminal "omarchy-remove-dev-env php" ;;
-  *Laravel*) present_terminal "omarchy-remove-dev-env laravel" ;;
-  *Symfony*) present_terminal "omarchy-remove-dev-env symfony" ;;
-  *) show_remove_development_menu ;;
-  esac
-}
-
-show_remove_elixir_menu() {
-  case $(menu "Remove" "  Elixir\n  Phoenix") in
-  *Elixir*) present_terminal "omarchy-remove-dev-env elixir" ;;
-  *Phoenix*) present_terminal "omarchy-remove-dev-env phoenix" ;;
-  *) show_remove_development_menu ;;
-  esac
-}
-
 show_update_menu() {
-  case $(menu "Update" "  Omarchy\n󰔫  Channel\n  Config\n󰸌  Extra Themes\n  Process\n󰇅  Hardware\n  Firmware\n  Password\n  Timezone\n  Time") in
+  case $(menu "Update" " Omarchy\n  Config\n󰸌  Extra Themes\n  Process\n󰇅  Hardware\n  Firmware\n  Password\n  Timezone\n  Time") in
   *Omarchy*) present_terminal omarchy-update ;;
-  *Channel*) show_update_channel_menu ;;
   *Config*) show_update_config_menu ;;
   *Themes*) present_terminal omarchy-theme-update ;;
   *Process*) show_update_process_menu ;;
@@ -531,20 +401,10 @@ show_update_menu() {
   esac
 }
 
-show_update_channel_menu() {
-  case $(menu "Update channel" "🟢 Stable\n🟡 RC\n🟠 Edge\n🔴 Dev") in
-  *Stable*) present_terminal "omarchy-channel-set stable" ;;
-  *RC*) present_terminal "omarchy-channel-set rc" ;;
-  *Edge*) present_terminal "omarchy-channel-set edge" ;;
-  *Dev*) present_terminal "omarchy-channel-set dev" ;;
-  *) show_update_menu ;;
-  esac
-}
 show_update_process_menu() {
-  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n󰎟  Mako\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
+  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
   *Hypridle*) omarchy-restart-hypridle ;;
   *Hyprsunset*) omarchy-restart-hyprsunset ;;
-  *Mako*) omarchy-restart-mako ;;
   *Swayosd*) omarchy-restart-swayosd ;;
   *Walker*) omarchy-restart-walker ;;
   *Waybar*) omarchy-restart-waybar ;;
@@ -553,14 +413,13 @@ show_update_process_menu() {
 }
 
 show_update_config_menu() {
-  case $(menu "Use default config" "  Hyprland\n  Hypridle\n  Hyprlock\n  Hyprsunset\n󱣴  Plymouth\n  Swayosd\n  Tmux\n󰌧  Walker\n󰍜  Waybar") in
+  case $(menu "Use default config" "  Hyprland\n  Hypridle\n  Hyprlock\n  Hyprsunset\n󱣴  Plymouth\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
   *Hyprland*) present_terminal omarchy-refresh-hyprland ;;
   *Hypridle*) present_terminal omarchy-refresh-hypridle ;;
   *Hyprlock*) present_terminal omarchy-refresh-hyprlock ;;
   *Hyprsunset*) present_terminal omarchy-refresh-hyprsunset ;;
   *Plymouth*) present_terminal omarchy-refresh-plymouth ;;
   *Swayosd*) present_terminal omarchy-refresh-swayosd ;;
-  *Tmux*) present_terminal omarchy-refresh-tmux ;;
   *Walker*) present_terminal omarchy-refresh-walker ;;
   *Waybar*) present_terminal omarchy-refresh-waybar ;;
   *) show_update_menu ;;
@@ -568,11 +427,10 @@ show_update_config_menu() {
 }
 
 show_update_hardware_menu() {
-  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth\n󰟸  Trackpad") in
+  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth") in
   *Audio*) present_terminal omarchy-restart-pipewire ;;
   *Wi-Fi*) present_terminal omarchy-restart-wifi ;;
   *Bluetooth*) present_terminal omarchy-restart-bluetooth ;;
-  *Trackpad*) present_terminal omarchy-restart-trackpad ;;
   *) show_update_menu ;;
   esac
 }
@@ -585,24 +443,13 @@ show_update_password_menu() {
   esac
 }
 
-show_about() {
-  omarchy-launch-about
-}
-
 show_system_menu() {
-  local options="󱄄  Screensaver\n  Lock"
-  ! omarchy-toggle-enabled suspend-off && options="$options\n󰒲  Suspend"
-  omarchy-hibernation-available && options="$options\n󰤁  Hibernate"
-  options="$options\n󰍃  Logout\n󰜉  Restart\n󰐥  Shutdown"
-
-  case $(menu "System" "$options") in
-  *Screensaver*) omarchy-launch-screensaver force ;;
+  case $(menu "System" "  Lock\n󱄄  Screensaver\n󰤄  Suspend\n󰜉  Restart\n󰐥  Shutdown") in
   *Lock*) omarchy-lock-screen ;;
+  *Screensaver*) omarchy-launch-screensaver force ;;
   *Suspend*) systemctl suspend ;;
-  *Hibernate*) systemctl hibernate ;;
-  *Logout*) omarchy-system-logout ;;
-  *Restart*) omarchy-system-reboot ;;
-  *Shutdown*) omarchy-system-shutdown ;;
+  *Restart*) omarchy-state clear re*-required && systemctl reboot --no-wall ;;
+  *Shutdown*) omarchy-state clear re*-required && systemctl poweroff --no-wall ;;
   *) back_to show_main_menu ;;
   esac
 }
@@ -616,31 +463,22 @@ go_to_menu() {
   *apps*) walker -p "Launch…" ;;
   *learn*) show_learn_menu ;;
   *trigger*) show_trigger_menu ;;
-  *toggle*) show_toggle_menu ;;
-  *hardware*) show_hardware_menu ;;
   *share*) show_share_menu ;;
-  *background*) show_background_menu ;;
-  *capture*) show_capture_menu ;;
   *style*) show_style_menu ;;
   *theme*) show_theme_menu ;;
+  *screenshot*) show_screenshot_menu ;;
   *screenrecord*) show_screenrecord_menu ;;
   *setup*) show_setup_menu ;;
   *power*) show_setup_power_menu ;;
   *install*) show_install_menu ;;
   *remove*) show_remove_menu ;;
   *update*) show_update_menu ;;
-  *about*) show_about ;;
+  *about*) omarchy-launch-about ;;
   *system*) show_system_menu ;;
   esac
 }
 
-# Allow user extensions and overrides
-USER_EXTENSIONS="$HOME/.config/omarchy/extensions/menu.sh"
-[[ -f $USER_EXTENSIONS ]] && source "$USER_EXTENSIONS"
-
-toggle_existing_menu
-
-if [[ -n $1 ]]; then
+if [[ -n "$1" ]]; then
   BACK_TO_EXIT=true
   go_to_menu "$1"
 else

bin/omarchy-menu-keybindings

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# Display Hyprland keybindings defined in your configuration using walker for an interactive search menu.
+# A script to display Hyprland keybindings defined in your configuration
+# using walker for an interactive search menu.
 
 declare -A KEYCODE_SYM_MAP
 
@@ -12,7 +13,7 @@ build_keymap_cache() {
   }
 
   while IFS=, read -r code sym; do
-    [[ -z $code || -z $sym ]] && continue
+    [[ -z "$code" || -z "$sym" ]] && continue
     KEYCODE_SYM_MAP["$code"]="$sym"
   done < <(
     awk '
@@ -42,17 +43,13 @@ lookup_keycode_cached() {
 
 parse_keycodes() {
   local start end elapsed
-  [[ ${DEBUG:-0} == "1" ]] && start=$(date +%s.%N)
+  [[ "${DEBUG:-0}" == "1" ]] && start=$(date +%s.%N)
   while IFS= read -r line; do
-    if [[ $line =~ code:([0-9]+) ]]; then
+    if [[ "$line" =~ code:([0-9]+) ]]; then
       code="${BASH_REMATCH[1]}"
-      if [[ $code == "201" ]]; then
-        echo "${line/SUPER SHIFT,code:201/,COPILOT KEY}"
-      else
-        symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
-        echo "${line/code:${code}/$symbol}"
-      fi
-    elif [[ $line =~ mouse:([0-9]+) ]]; then
+      symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
+      echo "${line/code:${code}/$symbol}"
+    elif [[ "$line" =~ mouse:([0-9]+) ]]; then
       code="${BASH_REMATCH[1]}"
 
       case "$code" in
@@ -68,7 +65,7 @@ parse_keycodes() {
     fi
   done
 
-  if [[ $DEBUG == "1" ]]; then
+  if [[ "$DEBUG" == "1" ]]; then
     end=$(date +%s.%N)
     # fall back to awk if bc is missing
     if command -v bc >/dev/null 2>&1; then
@@ -172,47 +169,35 @@ prioritize_entries() {
     line = $0
     prio = 50
     if (match(line, /Terminal/)) prio = 0
-    if (match(line, /Tmux/)) prio = 1
-    if (match(line, /Browser/) && !match(line, /Browser[[:space:]]*\(/) && !match(line, /SUPER SHIFT.*\+.*B.*→.*Browser/)) prio = 2
-    if (match(line, /File manager/) && !match(line, /File manager \(cwd\)/))  prio = 3
-    if (match(line, /Launch apps/))  prio = 4
-    if (match(line, /Omarchy menu/))  prio = 5
-    if (match(line, /System menu/))  prio = 6
-    if (match(line, /Theme menu/))  prio = 7
-    if (match(line, /Full screen/))  prio = 8
-    if (match(line, /Full width/))  prio = 9
-    if (match(line, /Close window/))  prio = 10
-    if (match(line, /Close all windows/))  prio = 11
-    if (match(line, /Lock system/))  prio = 12
-    if (match(line, /Toggle window floating/))  prio = 13
-    if (match(line, /Toggle window split/))  prio = 14
-    if (match(line, /Pop window/))  prio = 15
-    if (match(line, /Universal/))  prio = 16
-    if (match(line, /Clipboard/))  prio = 17
-    if (match(line, /Audio controls/))  prio = 18
-    if (match(line, /Bluetooth controls/))  prio = 19
-    if (match(line, /Wifi controls/))  prio = 20
-    if (match(line, /Emoji picker/))  prio = 21
-    if (match(line, /Color picker/))  prio = 22
-    if (match(line, /Screenshot/))  prio = 23
-    if (match(line, /Screenrecording/))  prio = 24
-    if (match(line, /SUPER SHIFT.*\+.*B.*→.*Browser/)) prio = 25
-    if (match(line, /File manager \(cwd\)/))  prio = 26
-    if (match(line, /(Switch|Next|Former|Previous).*workspace/))  prio = 27
-    if (match(line, /Move window to workspace/))  prio = 28
-    if (match(line, /Move window silently to workspace/))  prio = 29
-    if (match(line, /Swap window/))  prio = 30
-    if (match(line, /Focus/))  prio = 31
-    if (match(line, /Move window$/))  prio = 32
-    if (match(line, /Resize window/))  prio = 33
-    if (match(line, /Expand window/))  prio = 34
-    if (match(line, /Shrink window/))  prio = 35
-    if (match(line, /scratchpad/))  prio = 36
-    if (match(line, /notification/))  prio = 37
-    if (match(line, /Toggle window transparency/))  prio = 38
-    if (match(line, /Toggle workspace gaps/))  prio = 39
-    if (match(line, /Toggle nightlight/))  prio = 40
-    if (match(line, /Toggle locking/))  prio = 41
+    if (match(line, /Browser/) && !match(line, /Browser[[:space:]]*\(/)) prio = 1
+    if (match(line, /File manager/))  prio = 2
+    if (match(line, /Launch apps/))  prio = 3
+    if (match(line, /Omarchy menu/))  prio = 4
+    if (match(line, /System menu/))  prio = 5
+    if (match(line, /Theme menu/))  prio = 6
+    if (match(line, /Full screen/))  prio = 7
+    if (match(line, /Close window/))  prio = 8
+    if (match(line, /Toggle window floating/))  prio = 9
+    if (match(line, /Toggle window split/))  prio = 10
+    if (match(line, /Universal/))  prio = 11
+    if (match(line, /Clipboard/))  prio = 12
+    if (match(line, /Emoji picker/))  prio = 13
+    if (match(line, /Color picker/))  prio = 14
+    if (match(line, /Screenshot/))  prio = 15
+    if (match(line, /Screenrecording/))  prio = 16
+    if (match(line, /(Switch|Next|Former|Previous).*workspace/))  prio = 17
+    if (match(line, /Move window to workspace/))  prio = 18
+    if (match(line, /Swap window/))  prio = 19
+    if (match(line, /Move window focus/))  prio = 20
+    if (match(line, /Move window$/))  prio = 21
+    if (match(line, /Resize window/))  prio = 22
+    if (match(line, /Expand window/))  prio = 23
+    if (match(line, /Shrink window/))  prio = 24
+    if (match(line, /scratchpad/))  prio = 25
+    if (match(line, /notification/))  prio = 26
+    if (match(line, /Toggle window transparency/))  prio = 27
+    if (match(line, /Toggle workspace gaps/))  prio = 28
+    if (match(line, /Toggle nightlight/))  prio = 29
     if (match(line, /group/))  prio = 94
     if (match(line, /Scroll active workspace/))  prio = 95
     if (match(line, /Cycle to/))  prio = 96
@@ -227,25 +212,18 @@ prioritize_entries() {
   cut -f2-
 }
 
-output_keybindings() {
-  build_keymap_cache
+monitor_height=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .height')
+menu_height=$((monitor_height * 40 / 100))
 
-  {
-    dynamic_bindings
-    static_bindings
-  } |
-    sort -u |
-    parse_keycodes |
-    parse_bindings |
-    prioritize_entries
-}
+build_keymap_cache
 
-if [[ $1 == "--print" || $1 == "-p" ]]; then
-  output_keybindings
-else
-  monitor_height=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .height')
-  menu_height=$((monitor_height * 40 / 100))
+{
+  dynamic_bindings
+  static_bindings
+} |
+  sort -u |
+  parse_keycodes |
+  parse_bindings |
+  prioritize_entries |
+  walker --dmenu -p 'Keybindings' --width 800 --height "$menu_height"
 
-  output_keybindings |
-    walker --dmenu -p 'Keybindings' --width 800 --height "$menu_height"
-fi

bin/omarchy-migrate

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-# Run all pending migrations to bring the system in line with the installed version.
-
 # Where we store an empty file for each migration that has already been performed.
 STATE_DIR="$HOME/.local/state/omarchy/migrations"
 mkdir -p "$STATE_DIR"
@@ -10,10 +8,10 @@ mkdir -p "$STATE_DIR"
 mkdir -p "$STATE_DIR/skipped"
 
 # Run any pending migrations
-for file in $OMARCHY_PATH/migrations/*.sh; do
+for file in ~/.local/share/omarchy/migrations/*.sh; do
   filename=$(basename "$file")
 
-  if [[ ! -f $STATE_DIR/$filename && ! -f $STATE_DIR/skipped/$filename ]]; then
+  if [[ ! -f "$STATE_DIR/$filename" && ! -f "$STATE_DIR/skipped/$filename" ]]; then
     echo -e "\e[32m\nRunning migration (${filename%.sh})\e[0m"
 
     if bash $file; then

bin/omarchy-notification-dismiss

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-# Dismiss a mako notification on the basis of its summary. Used by the first-run notifications to dismiss them after clicking for action.
-
 if (($# == 0)); then
   echo "Usage: omarchy-notification-dismiss <summary>"
   exit 1