Remove the migration too

AGENTS.md

@@ -12,7 +12,6 @@
 All commands start with `omarchy-`. Prefixes indicate purpose:
 
 - `cmd-` - check if commands exist, misc utility commands
-- `capture-` - screenshots, screen recordings, and other capture tools
 - `pkg-` - package management helpers
 - `hw-` - hardware detection (return exit codes for use in conditionals)
 - `refresh-` - copy default config to user's `~/.config/`

applications/hidden/lstopo.desktop

@@ -1,2 +0,0 @@
-[Desktop Entry]
-Hidden=true

bin/omarchy-ac-present

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Returns true if AC power is connected.
+# Returns true if AC power is connected.
 
 for ac in /sys/class/power_supply/AC* /sys/class/power_supply/ADP*; do
   [[ -r $ac/online && $(cat "$ac/online") == "1" ]] && exit 0

bin/omarchy-audio-input-mute

@@ -1,21 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Toggle microphone mute. Drives the hardware mic-mute LED on laptops that expose one.
-
-wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
-
-if pactl get-source-mute @DEFAULT_SOURCE@ | rg -q 'yes'; then
-  led=on
-  osd_message='Microphone muted'
-  osd_icon='microphone-sensitivity-muted-symbolic'
-else
-  led=off
-  osd_message='Microphone on'
-  osd_icon='audio-input-microphone-symbolic'
-fi
-
-omarchy-brightness-keyboard-mute "$led"
-
-omarchy-swayosd-client \
-  --custom-message "$osd_message" \
-  --custom-icon "$osd_icon"

bin/omarchy-battery-capacity

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Returns the battery full capacity in Wh (rounded to whole number).
+# Returns the battery full capacity in Wh (rounded to whole number).
+# Used by omarchy-battery-status for displaying battery capacity.
 
 battery_info=$(upower -i $(upower -e | grep BAT))
 

bin/omarchy-battery-monitor

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Designed to be run by systemd timer every 30 seconds and alerts if battery is low
+# Designed to be run by systemd timer every 30 seconds and alerts if battery is low
 
 BATTERY_THRESHOLD=10
 NOTIFICATION_FLAG="/run/user/$UID/omarchy_battery_notified"

bin/omarchy-battery-present

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Returns true if a battery is present on the system.
+# Returns true if a battery is present on the system.
+# Used by the battery monitor and other battery-related checks.
 
 for bat in /sys/class/power_supply/BAT*; do
   [[ -r $bat/present ]] &&

bin/omarchy-battery-remaining

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Returns the battery percentage remaining as an integer.
+# Returns the battery percentage remaining as an integer.
+# Used by the battery monitor and the Ctrl + Shift + Super + B hotkey.
 
 upower -i $(upower -e | grep BAT) | awk '/percentage/ { 
     print int($2)

bin/omarchy-battery-remaining-time

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Returns the battery time remaining (to empty or full) in a compact format.
+# Returns the battery time remaining (to empty or full) in a compact format.
 
 battery_info=$(upower -i $(upower -e | grep BAT))
 

bin/omarchy-battery-status

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Returns a formatted battery status string with percentage and power draw/charge.
+# Returns a formatted battery status string with percentage and power draw/charge.
+# Used by the battery notification hotkey (Ctrl + Shift + Super + B).
 
 battery_info=$(upower -i $(upower -e | grep BAT))
 

bin/omarchy-branch-set

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Set the branch for Omarchy's git repository.
-# omarchy:args=<master|rc|dev>
+# Set the branch for Omarchy's git repository.
 
 if (($# == 0)); then
   echo "Usage: omarchy-branch-set [master|rc|dev]"

bin/omarchy-brightness-display

@@ -1,15 +1,10 @@
 #!/bin/bash
 
-# omarchy:summary=Adjust brightness on the most likely display device.
-# omarchy:args=<step>
+# Adjust brightness on the most likely display device.
+# Usage: omarchy-brightness-display <step>
 
 step="${1:-+5%}"
 
-if omarchy-hyprland-monitor-focused-apple; then
-  omarchy-brightness-display-apple "$step"
-  exit
-fi
-
 # Start with the first possible output, then refine to the most likely given an order heuristic.
 device="$(ls -1 /sys/class/backlight 2>/dev/null | head -n1)"
 for candidate in amdgpu_bl* intel_backlight acpi_video*; do
@@ -19,31 +14,6 @@ for candidate in amdgpu_bl* intel_backlight acpi_video*; do
   fi
 done
 
-# Current brightness percentage
-current=$(brightnessctl -d "$device" -m | cut -d',' -f4 | tr -d '%')
-
-# Apply non-uniform step size: 1% steps if at or below 5%, otherwise set an
-# absolute target percentage to avoid raw backlight rounding causing uneven OSD steps.
-if [[ $step == "+5%" ]]; then
-  if (( current < 5 )); then
-    (( target = current + 1 ))
-  else
-    (( target = current + 5 ))
-  fi
-
-  (( target > 100 )) && target=100
-  step="$target%"
-elif [[ $step == "5%-" ]]; then
-  if (( current <= 5 )); then
-    (( target = current - 1 ))
-  else
-    (( target = current - 5 ))
-  fi
-
-  (( target < 1 )) && target=1
-  step="$target%"
-fi
-
 # Set the actual brightness of the display device.
 brightnessctl -d "$device" set "$step" >/dev/null
 

bin/omarchy-brightness-display-apple

@@ -1,32 +1,12 @@
 #!/bin/bash
 
-# omarchy:summary=Adjust the brightness on Apple Studio Displays and Apple XDR Displays using asdcontrol.
+# Adjust the brightness on Apple Studio Displays and Apple XDR Displays using asdcontrol.
 
 if (( $# == 0 )); then
-  echo "Adjust Apple Display brightness by passing +5%, 5%-, or 100%"
+  echo "Adjust Apple Display Brightness by passing +5000 or -5000 (or any range from 0-60000)"
 else
-  step="$1"
-  if [[ $step =~ ^([0-9]+)%-$ ]]; then
-    step="-${BASH_REMATCH[1]}%"
-  fi
-
-  devices=()
-  for path in /dev/usb/hiddev* /dev/hiddev*; do
-    [[ -e $path ]] && devices+=("$path")
-  done
-
-  if (( ${#devices[@]} == 0 )); then
-    echo "No Apple Display HID device found"
-    exit 1
-  fi
-
-  device="$(sudo asdcontrol --detect "${devices[@]}" | grep -E '^/dev/(usb/)?hiddev' | cut -d: -f1 | head -n1)"
-  if [[ -z $device ]]; then
-    echo "No Apple Display HID device found"
-    exit 1
-  fi
-
-  sudo asdcontrol "$device" -- "$step" >/dev/null
+  device="$(sudo asdcontrol --detect /dev/usb/hiddev* | grep ^/dev/usb/hiddev | cut -d: -f1)"
+  sudo asdcontrol "$device" -- "$1" >/dev/null
   value="$(sudo asdcontrol "$device" | awk -F= '/BRIGHTNESS=/{print $2+0}')"
   omarchy-swayosd-brightness "$(( value * 100 / 60000 ))"
 fi

bin/omarchy-brightness-keyboard

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Adjust keyboard backlight brightness using available steps.
-# omarchy:args=<up|down|cycle>
+# Adjust keyboard backlight brightness using available steps.
+# Usage: omarchy-brightness-keyboard <up|down|cycle>
 
 direction="${1:-up}"
 

bin/omarchy-brightness-keyboard-mute

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Set the mic-mute indicator LED on laptops that expose a platform::micmute LED node.
-# omarchy:args=<on|off>
-
-if [[ -e /sys/class/leds/platform::micmute/brightness ]]; then
-  case "$1" in
-    on)  value=1 ;;
-    off) value=0 ;;
-    *)   echo "Usage: $(basename "$0") <on|off>" >&2; exit 1 ;;
-  esac
-
-  brightnessctl --device="platform::micmute" set "$value" >/dev/null 2>&1 || true
-fi

bin/omarchy-channel-set

@@ -1,8 +1,17 @@
 #!/bin/bash
 
-# omarchy:summary=Set the Omarchy channel, which dictates what git branch and package repository is used.
-# omarchy:args=<stable|rc|edge|dev>
-# omarchy:requires-sudo=true
+# Set the Omarchy channel, which dictates what git branch and package repository is used.
+#
+# Stable uses the master branch, which only sees updates on official releases, and
+# the stable package repository, which typically lags the edge by a month to ensure
+# better compatibility.
+#
+# Edge tracks the latest package repository, but still relies on the master branch,
+# so new packages which require config changes may cause conflicts or errors.
+#
+# Dev tracks the active development dev branch, which may include partial or broken updates,
+# as well as the latest package repository. This should only be used by Omarchy developers
+# and people with a lot of experience managing Linux systems.
 
 if (($# == 0)); then
   echo "Usage: omarchy-channel-set [stable|rc|edge|dev]"

bin/omarchy-cmd-audio-switch

@@ -1,12 +1,16 @@
 #!/bin/bash
 
-# omarchy:summary=Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.
+# Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.
+
+focused_monitor=$(omarchy-hyprland-monitor-focused)
 
 sinks=$(pactl -f json list sinks | jq '[.[] | select((.ports | length == 0) or ([.ports[]? | .availability != "not available"] | any))]')
 sinks_count=$(echo "$sinks" | jq '. | length')
 
 if (( sinks_count == 0 )); then
-  omarchy-swayosd-client --custom-message "No audio devices found"
+  swayosd-client \
+    --monitor "$focused_monitor" \
+    --custom-message "No audio devices found"
   exit 1
 fi
 
@@ -53,10 +57,10 @@ fi
 next_sink_volume_icon="sink-volume-${icon_state}-symbolic"
 
 if [[ $next_sink_name != $current_sink_name ]]; then
-  next_sink_wpid=$(echo "$next_sink" | jq -r '.properties."object.id"')
-  wpctl set-default "$next_sink_wpid"
+  pactl set-default-sink "$next_sink_name"
 fi
 
-omarchy-swayosd-client \
+swayosd-client \
+  --monitor "$focused_monitor" \
   --custom-message "$next_sink_description" \
   --custom-icon "$next_sink_volume_icon"

bin/omarchy-cmd-first-run

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Finish the installation of Omarchy with items that can only be done after logging in.
-# omarchy:requires-sudo=true
+# Finish the installation of Omarchy with items that can only be done after logging in.
 
 set -e
 
@@ -11,7 +10,6 @@ if [[ -f $FIRST_RUN_MODE ]]; then
   rm -f "$FIRST_RUN_MODE"
 
   bash "$OMARCHY_PATH/install/first-run/battery-monitor.sh"
-  bash "$OMARCHY_PATH/install/first-run/recover-internal-monitor.sh"
   bash "$OMARCHY_PATH/install/first-run/cleanup-reboot-sudoers.sh"
   bash "$OMARCHY_PATH/install/first-run/firewall.sh"
   bash "$OMARCHY_PATH/install/first-run/dns-resolver.sh"

bin/omarchy-cmd-mic-mute

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Toggle microphone mute. Dell XPS systems get special handling for the hardware LED.
+
+if omarchy-hw-match "XPS"; then
+  omarchy-cmd-mic-mute-xps
+else
+  swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)" --input-volume mute-toggle
+fi

bin/omarchy-cmd-mic-mute-xps

@@ -0,0 +1,44 @@
+#!/bin/bash
+
+# Toggle microphone mute on Dell XPS systems. Uses wpctl for reliable toggling
+# and syncs the ALSA capture switch so the hardware mic mute LED follows state.
+
+wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
+
+if pactl get-source-mute @DEFAULT_SOURCE@ | rg -q 'yes'; then
+  alsa_value='off,off'
+  osd_message='Microphone muted'
+  osd_icon='microphone-sensitivity-muted-symbolic'
+else
+  alsa_value='on,on'
+  osd_message='Microphone on'
+  osd_icon='audio-input-microphone-symbolic'
+fi
+
+if [[ -e /sys/class/leds/platform::micmute/brightness ]]; then
+  default_source=$(pactl get-default-source)
+  alsa_card=$(pactl -f json list sources | jq -r --arg source "$default_source" '
+    .[] | select(.name == $source) |
+    .properties["alsa.card"] // .properties["api.alsa.card"] // .properties["api.alsa.pcm.card"] // empty
+  ' | head -1)
+
+  if [[ -n $alsa_card ]]; then
+    cards=("$alsa_card")
+  else
+    mapfile -t cards < <(compgen -G '/proc/asound/card*' | rg -o 'card[0-9]+' | sed 's/card//' | sort -u)
+  fi
+
+  for card in "${cards[@]}"; do
+    while IFS= read -r control; do
+      if [[ $control != *"Jack Microphone"* ]]; then
+        amixer -c "$card" cset "$control" "$alsa_value" >/dev/null 2>&1 || true
+        break 2
+      fi
+    done < <(amixer -c "$card" controls 2>/dev/null | rg -o "name='[^']*Microphone Capture Switch'")
+  done
+fi
+
+swayosd-client \
+  --monitor "$(omarchy-hyprland-monitor-focused)" \
+  --custom-message "$osd_message" \
+  --custom-icon "$osd_icon"

bin/omarchy-cmd-missing

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Check whether any required commands are missing
+# Returns true if any of the commands passed in as arguments are missing on the system.
 
 for cmd in "$@"; do
   if ! command -v "$cmd" &>/dev/null; then

bin/omarchy-cmd-present

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Check whether all required commands are available
+# Returns true if all the commands passed in as arguments exit on the system.
 
 for cmd in "$@"; do
   command -v "$cmd" &>/dev/null || exit 1

bin/omarchy-cmd-screenrecord

@@ -1,10 +1,9 @@
 #!/bin/bash
 
-# omarchy:summary=Start or stop screen recording
-# omarchy:group=capture
-# omarchy:args=[--with-desktop-audio] [--with-microphone-audio] [--with-webcam] [--webcam-device=<device>] [--resolution=<size>] [--stop-recording]
-# omarchy:examples=omarchy screenrecord | omarchy capture screenrecord --with-desktop-audio
-# omarchy:aliases=omarchy screenrecord
+# Start and stop a screenrecording, which will be saved to ~/Videos by default.
+# Alternative location can be set via OMARCHY_SCREENRECORD_DIR or XDG_VIDEOS_DIR ENVs.
+# Resolution is capped to 4K for monitors above 4K, native otherwise.
+# Override via --resolution= (e.g. --resolution=1920x1080, --resolution=0x0 for native).
 
 [[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
 OUTPUT_DIR="${OMARCHY_SCREENRECORD_DIR:-${XDG_VIDEOS_DIR:-$HOME/Videos}}"
@@ -135,7 +134,7 @@ stop_screenrecording() {
     pkill -9 -f "^gpu-screen-recorder"
     notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
   else
-    finalize_recording
+    trim_first_frame
     local filename=$(cat "$RECORDING_FILE" 2>/dev/null)
     local preview="${filename%.mp4}-preview.png"
 
@@ -160,29 +159,17 @@ screenrecording_active() {
   pgrep -f "^gpu-screen-recorder" >/dev/null
 }
 
-finalize_recording() {
+trim_first_frame() {
   local latest
   latest=$(cat "$RECORDING_FILE" 2>/dev/null)
-  [[ -f $latest ]] || return
 
-  # Re-encode only when the first GOP contains discardable warmup packets — stream copy can't
-  # trim those (it rewinds to the keyframe). Clean recordings stay on the fast stream-copy path.
-  local video_codec=(-c:v copy)
-  if ffprobe -v error -select_streams v:0 -read_intervals %+0.2 -show_entries packet=flags -of csv=p=0 "$latest" 2>/dev/null | grep -q D; then
-    video_codec=(-c:v libx264 -preset veryfast -crf 20)
-  fi
-
-  # Trim the first frame, and normalize audio to -14 LUFS if present, in a single pass
-  local args=(-y -ss 0.1 -i "$latest" "${video_codec[@]}")
-  if ffprobe -v error -select_streams a -show_entries stream=codec_type -of csv=p=0 "$latest" 2>/dev/null | grep -q audio; then
-    args+=(-af loudnorm=I=-14:TP=-1.5:LRA=11)
-  fi
-
-  local processed="${latest%.mp4}-processed.mp4"
-  if ffmpeg "${args[@]}" "$processed" -loglevel quiet 2>/dev/null; then
-    mv "$processed" "$latest"
-  else
-    rm -f "$processed"
+  if [[ -n $latest && -f $latest ]]; then
+    local trimmed="${latest%.mp4}-trimmed.mp4"
+    if ffmpeg -y -ss 0.1 -i "$latest" -c copy "$trimmed" -loglevel quiet 2>/dev/null; then
+      mv "$trimmed" "$latest"
+    else
+      rm -f "$trimmed"
+    fi
   fi
 }
 

bin/omarchy-cmd-screensaver

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Run the Omarchy screensaver using random effects from TTE.
+# Run the Omarchy screensaver using random effects from TTE.
 
 screensaver_in_focus() {
   hyprctl activewindow -j | jq -e '.class == "org.omarchy.screensaver"' >/dev/null 2>&1
@@ -25,7 +25,8 @@ tty=$(tty 2>/dev/null)
 while true; do
   tte -i ~/.config/omarchy/branding/screensaver.txt \
     --frame-rate 120 --canvas-width 0 --canvas-height 0 --reuse-canvas --anchor-canvas c --anchor-text c\
-    --random-effect --no-eol --no-restore-cursor &
+    --random-effect --exclude-effects dev_worm \
+    --no-eol --no-restore-cursor &
 
   while pgrep -t "${tty#/dev/}" -x tte >/dev/null; do
     if read -n1 -t 1 || ! screensaver_in_focus; then

bin/omarchy-cmd-screenshot

@@ -1,10 +1,8 @@
 #!/bin/bash
 
-# omarchy:summary=Take a screenshot
-# omarchy:group=capture
-# omarchy:args=[smart|region|windows|fullscreen] [slurp|copy] [--editor=<name>]
-# omarchy:examples=omarchy screenshot | omarchy capture screenshot region
-# omarchy:aliases=omarchy screenshot
+# Take a screenshot of the whole screen, a specific window, or a user-drawn region.
+# Saves to ~/Pictures by default, but that can be changed via OMARCHY_SCREENSHOT_DIR or XDG_PICTURES_DIR ENVs.
+# Editor defaults to Satty but can be changed via --editor=<name> or OMARCHY_SCREENSHOT_EDITOR env
 
 [[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
 OUTPUT_DIR="${OMARCHY_SCREENSHOT_DIR:-${XDG_PICTURES_DIR:-$HOME/Pictures}}"
@@ -65,13 +63,6 @@ get_rectangles() {
   hyprctl clients -j | jq -r --arg ws "$active_workspace" '.[] | select(.workspace.id == ($ws | tonumber)) | "\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1])"'
 }
 
-# Keep hyprpicker alive until after grim captures so the screenshot sees the
-# frozen overlay rather than live content shifting during teardown.
-cleanup_freeze() {
-  [[ -n $PID ]] && kill $PID 2>/dev/null
-}
-trap cleanup_freeze EXIT
-
 # Select based on mode
 case "$MODE" in
 region)
@@ -79,12 +70,14 @@ region)
   PID=$!
   sleep .1
   SELECTION=$(slurp 2>/dev/null)
+  kill $PID 2>/dev/null
   ;;
 windows)
   hyprpicker -r -z >/dev/null 2>&1 &
   PID=$!
   sleep .1
   SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
+  kill $PID 2>/dev/null
   ;;
 fullscreen)
   SELECTION=$(hyprctl monitors -j | jq -r "${JQ_MONITOR_GEO} .[] | select(.focused == true) | format_geo")
@@ -95,6 +88,7 @@ smart | *)
   PID=$!
   sleep .1
   SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
+  kill $PID 2>/dev/null
 
   # If the selection area is L * W < 20, we'll assume you were trying to select whichever
   # window or output it was inside of to prevent accidental 2px snapshots

bin/omarchy-cmd-share

@@ -1,13 +1,9 @@
 #!/bin/bash
 
-# omarchy:summary=Share clipboard, files, or folders with LocalSend
-# omarchy:group=share
-# omarchy:name=
-# omarchy:args=<clipboard|file|folder> [path...]
-# omarchy:examples=omarchy share clipboard | omarchy share file ~/Downloads/example.txt
+# Share clipboard, file, or folder using LocalSend. Bound to Super + Ctrl + S by default.
 
 if (($# == 0)); then
-  echo "Usage: omarchy-menu-share [clipboard|file|folder]"
+  echo "Usage: omarchy-cmd-share [clipboard|file|folder]"
   exit 1
 fi
 

bin/omarchy-cmd-terminal-cwd

@@ -1,7 +1,9 @@
 #!/bin/bash
 
-# omarchy:summary=Print the current working directory of the active terminal window
+# Returns the current working directory of the active terminal window,
+# so a new terminal window can be started in the same directory.
 
+# Go from current active terminal to its child shell process and run cwd there
 terminal_pid=$(hyprctl activewindow | awk '/pid:/ {print $2}')
 shell_pid=$(pgrep -P "$terminal_pid" | tail -n1)
 

bin/omarchy-config-direct-boot

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Add or remove an EFI boot entry for the Omarchy UKI, allowing the system to boot directly
-# omarchy:requires-sudo=true
+# Add an EFI boot entry for the Omarchy UKI, allowing the system to boot directly
+# without a bootloader like Limine. Requires UEFI firmware and a built UKI.
 
 if [[ ! -d /sys/firmware/efi ]]; then
   echo "Error: System is not booted in UEFI mode" >&2
@@ -23,36 +23,23 @@ if cat /sys/class/dmi/id/bios_vendor 2>/dev/null | grep -qi "Apple"; then
   exit 1
 fi
 
-existing_entry=$(efibootmgr | grep -E "^Boot[0-9A-Fa-f]+\*? Omarchy([[:space:]]|$)" | head -1)
+uki_file=$(find /boot/EFI/Linux/ -name "omarchy*.efi" -printf "%f\n" 2>/dev/null | head -1)
 
-if [[ -n $existing_entry ]]; then
-  boot_num=$(echo "$existing_entry" | sed -n 's/^Boot\([0-9A-Fa-f]\+\).*/\1/p')
-
-  if gum confirm "Disable direct boot (remove Omarchy EFI entry)?"; then
-    echo "Removing EFI boot entry $boot_num"
-    sudo efibootmgr --bootnum "$boot_num" --delete-bootnum >/dev/null
-  fi
-
-  exit 0
-else
-  uki_file=$(find /boot/EFI/Linux/ -name "omarchy*.efi" -printf "%f\n" 2>/dev/null | head -1)
-
-  if [[ -z $uki_file ]]; then
-    echo "Error: No Omarchy UKI found in /boot/EFI/Linux/" >&2
-    exit 1
-  fi
-
-  boot_source=$(findmnt -n -o SOURCE /boot)
-  disk=$(echo "$boot_source" | sed 's/p\?[0-9]*$//')
-  part=$(echo "$boot_source" | grep -o 'p\?[0-9]*$' | sed 's/^p//')
-
-  if gum confirm "Setup direct boot (so snapshot booting must be done via bios)?"; then
-    echo "Creating EFI boot entry for $uki_file"
-
-    sudo efibootmgr --create \
-      --disk "$disk" \
-      --part "$part" \
-      --label "Omarchy" \
-      --loader "\\EFI\\Linux\\$uki_file"
-  fi
+if [[ -z $uki_file ]]; then
+  echo "Error: No Omarchy UKI found in /boot/EFI/Linux/" >&2
+  exit 1
+fi
+
+boot_source=$(findmnt -n -o SOURCE /boot)
+disk=$(echo "$boot_source" | sed 's/p\?[0-9]*$//')
+part=$(echo "$boot_source" | grep -o 'p\?[0-9]*$' | sed 's/^p//')
+
+if gum confirm "Setup direct boot (so snapshot booting must be done via bios)?"; then
+  echo "Creating EFI boot entry for $uki_file"
+
+  sudo efibootmgr --create \
+    --disk "$disk" \
+    --part "$part" \
+    --label "Omarchy" \
+    --loader "\\EFI\\Linux\\$uki_file"
 fi

bin/omarchy-debug

@@ -1,9 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Print debugging information
-# omarchy:args=[--no-sudo] [--print]
-# omarchy:examples=omarchy debug --print --no-sudo
-# omarchy:requires-sudo=true
+# Return exhaustive debugging information about the system to help diagnose problems.
 
 NO_SUDO=false
 PRINT_ONLY=false

bin/omarchy-dev-add-migration

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Creates a new Omarchy migration named after the unix timestamp of the last commit.
+# Creates a new Omarchy migration named after the unix timestamp of the last commit.
+# Only intended for Omarchy developers.
 
 cd ~/.local/share/omarchy
 migration_file="$HOME/.local/share/omarchy/migrations/$(git log -1 --format=%cd --date=unix).sh"

bin/omarchy-dev-benchmark

@@ -1,111 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Measure Omarchy CLI response times
-# omarchy:args=[--repeat=<count>]
-# omarchy:examples=omarchy dev benchmark | omarchy dev benchmark --repeat=10
-
-set -euo pipefail
-
-OMARCHY_BIN_DIR=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)
-CLI="$OMARCHY_BIN_DIR/omarchy"
-REPEAT=5
-
-show_help() {
-  cat <<'EOF'
-Usage:
-  omarchy dev benchmark [--repeat=<count>]
-
-Measure response times for common Omarchy CLI surfaces.
-
-Options:
-  --repeat=<count>  Number of times to run each case (default: 5)
-EOF
-}
-
-now_us() {
-  local now="${EPOCHREALTIME/./}"
-  printf '%s' "$now"
-}
-
-format_ms() {
-  local us="$1"
-  printf '%d.%03d' "$(( us / 1000 ))" "$(( us % 1000 ))"
-}
-
-run_case() {
-  local label="$1"
-  shift
-  local total_us=0
-  local min_us=0
-  local max_us=0
-  local elapsed_us=0
-  local start_us=0
-  local end_us=0
-  local status=0
-
-  for (( i = 1; i <= REPEAT; i++ )); do
-    start_us=$(now_us)
-    if "$@" >/dev/null; then
-      status=0
-    else
-      status=$?
-    fi
-    end_us=$(now_us)
-
-    if (( status != 0 )); then
-      printf '%-34s failed (exit %d)\n' "$label" "$status"
-      return "$status"
-    fi
-
-    elapsed_us=$(( end_us - start_us ))
-    total_us=$(( total_us + elapsed_us ))
-
-    if (( i == 1 || elapsed_us < min_us )); then
-      min_us=$elapsed_us
-    fi
-
-    if (( elapsed_us > max_us )); then
-      max_us=$elapsed_us
-    fi
-  done
-
-  printf '%-34s avg %8s ms  min %8s ms  max %8s ms\n' \
-    "$label" \
-    "$(format_ms "$(( total_us / REPEAT ))")" \
-    "$(format_ms "$min_us")" \
-    "$(format_ms "$max_us")"
-}
-
-while (( $# > 0 )); do
-  case "$1" in
-  --repeat=*)
-    REPEAT="${1#*=}"
-    ;;
-  --help | -h)
-    show_help
-    exit 0
-    ;;
-  *)
-    echo "Unknown option: $1" >&2
-    show_help >&2
-    exit 2
-    ;;
-  esac
-  shift
-done
-
-if [[ ! $REPEAT =~ ^[0-9]+$ ]] || (( REPEAT < 1 )); then
-  echo "--repeat must be a positive integer" >&2
-  exit 2
-fi
-
-printf 'Omarchy CLI benchmark (%d runs each)\n\n' "$REPEAT"
-run_case "omarchy" "$CLI"
-run_case "omarchy --help" "$CLI" --help
-run_case "omarchy commands" "$CLI" commands
-run_case "omarchy commands --json" "$CLI" commands --json
-run_case "omarchy commands --all --json" "$CLI" commands --all --json
-run_case "omarchy theme set --help" "$CLI" theme set --help
-run_case "omarchy screenshot --help" "$CLI" screenshot --help
-run_case "omarchy restart --help" "$CLI" restart --help
-run_case "omarchy theme current" "$CLI" theme current

bin/omarchy-dev-bin-metadata

@@ -1,86 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Show Omarchy bin metadata fields and defaults
-# omarchy:args=[--json]
-
-set -euo pipefail
-
-show_json() {
-  jq -n '{
-    ok: true,
-    defaults: {
-      group: "first filename segment after omarchy-",
-      name: "remaining filename segments with dashes converted to spaces",
-      route: "omarchy <group> <name>",
-      binary: "filename",
-      requires_sudo: false
-    },
-    fields: [
-      {name: "summary", required: true, type: "string", note: "One-line human and agent-facing description."},
-      {name: "group", required: false, type: "string", note: "Only set when the route group should differ from the filename-derived group."},
-      {name: "name", required: false, type: "string", note: "Only set when the route name should differ from the filename-derived name. May be empty for root commands."},
-      {name: "args", required: false, type: "string", note: "Only set when the command accepts arguments."},
-      {name: "examples", required: false, type: "string", note: "Pipe-separated examples."},
-      {name: "aliases", required: false, type: "string", note: "Pipe-separated alternate routes, e.g. omarchy screenshot."},
-      {name: "requires-sudo", required: false, type: "true", default: false, note: "Only include when true."}
-    ]
-  }'
-}
-
-show_help() {
-  cat <<'EOF'
-Omarchy bin metadata
-
-Metadata lives in the top comment block of each executable bin/omarchy-* file.
-Keep it slim: define only fields that are required or override defaults.
-
-Required:
-  # omarchy:summary=<one-line description>
-
-Inferred defaults:
-  group         first filename segment after omarchy-
-  name          remaining filename segments, with dashes converted to spaces
-  route         omarchy <group> <name>
-  binary        filename
-  requires-sudo false
-
-Optional fields:
-  # omarchy:group=<group>                  route override only
-  # omarchy:name=<name>                    route override only; may be empty
-  # omarchy:args=<args>                    only if the command accepts args
-  # omarchy:examples=<cmd> | <cmd>         pipe-separated examples
-  # omarchy:aliases=<route> | <route>      pipe-separated alternate routes
-  # omarchy:requires-sudo=true             only when true
-
-Do not define:
-  binary      inferred from filename
-  usage       derived from route + args
-  false flags or empty args
-
-Examples:
-  # omarchy:summary=Restart Walker and related user services
-
-  # omarchy:summary=Take a screenshot
-  # omarchy:group=capture
-  # omarchy:args=[smart|region|windows|fullscreen] [slurp|copy] [--editor=<name>]
-  # omarchy:examples=omarchy screenshot | omarchy capture screenshot region
-  # omarchy:aliases=omarchy screenshot
-EOF
-}
-
-case "${1:-}" in
---json)
-  show_json
-  ;;
---help | -h)
-  show_help
-  ;;
-"")
-  show_help
-  ;;
-*)
-  echo "Unknown option: $1" >&2
-  show_help >&2
-  exit 2
-  ;;
-esac

bin/omarchy-drive-info

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Print drive information such as size, model, and mount details
-# omarchy:args=<drive>
+# Returns drive information about a given volumne, like /dev/nvme0, which is used by omarchy-drive-select.
 
 if (($# == 0)); then
   echo "Usage: omarchy-drive-info [/dev/drive]"

bin/omarchy-drive-select

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Select a drive from a list with info that includes space and brand. Used by omarchy-drive-set-password.
+# Select a drive from a list with info that includes space and brand. Used by omarchy-drive-set-password.
 
 if (($# == 0)); then
   drives=$(lsblk -dpno NAME | grep -E '/dev/(sd|hd|vd|nvme|mmcblk|xv)')

bin/omarchy-drive-set-password

@@ -1,12 +1,11 @@
 #!/bin/bash
 
-# omarchy:summary=Set a new encryption password for a drive selected.
-# omarchy:requires-sudo=true
+# Set a new encryption password for a drive selected.
 
 encrypted_drives=$(blkid -t TYPE=crypto_LUKS -o device)
 
 if [[ -n $encrypted_drives ]]; then
-  if (( $(wc -l <<<"$encrypted_drives") == 1 )); then
+  if (( $(wc -l <<<encrypted_drives) == 1 )); then
     drive_to_change="$encrypted_drives"
   else
     drive_to_change="$(omarchy-drive-select "$encrypted_drives")"

bin/omarchy-font-current

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Show current monospace font
-# omarchy:examples=omarchy font current
+# Returns the name of the current monospace font being used by extracting it from the Waybar stylesheet.
+# This can be changed using omarchy-font-set.
 
 grep -oP 'font-family:\s*["'\'']?\K[^;"'\'']+' ~/.config/waybar/style.css | head -n1

bin/omarchy-font-list

@@ -1,6 +1,5 @@
 #!/bin/bash
 
-# omarchy:summary=List available monospace fonts
-# omarchy:examples=omarchy font list | omarchy font set "CaskaydiaMono Nerd Font"
+# Returns a list of all the monospace fonts available on the system that can be set using omarchy-font-set.
 
 fc-list :spacing=100 -f "%{family[0]}\n" | grep -v -i -E 'emoji|signwriting|omarchy' | sort -u

bin/omarchy-font-set

@@ -1,8 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Set the system monospace font
-# omarchy:args=<font-name>
-# omarchy:examples=omarchy font list | omarchy font set "CaskaydiaMono Nerd Font"
+# Set the system-wide monospace font that should be used by the terminal, hyprlock, waybar, swayosd, etc.
+# The font name must be one of the ones returned by omarchy-font-list.
 
 font_name="$1"
 

bin/omarchy-haptic-touchpad

@@ -1,7 +1,5 @@
 #!/usr/bin/env python3
 
-# omarchy:summary=Run the Synaptics touchpad haptic feedback daemon
-
 """Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
 
 Monitors touchpad button press events and sends haptic pulses via HID

bin/omarchy-hibernation-available

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Check if hibernation is supported
-
+# Check if hibernation is supported
 if [[ ! -f /sys/power/image_size ]]; then
   exit 1
 fi

bin/omarchy-hibernation-remove

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Remove hibernation setup including swap and boot resume settings
-# omarchy:requires-sudo=true
+# Removes hibernation setup: disables swap, removes swapfile, removes fstab entry,
+# removes resume hook, and removes suspend-then-hibernate configuration.
 
 MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
 

bin/omarchy-hibernation-setup

@@ -1,27 +1,14 @@
 #!/bin/bash
 
-# omarchy:summary=Set up hibernation with swap and boot resume configuration
-# omarchy:requires-sudo=true
-# omarchy:args=[--force] [--no-rebuild]
-
-FORCE=false
-NO_REBUILD=false
-for arg in "$@"; do
-  case "$arg" in
-    --force) FORCE=true ;;
-    --no-rebuild) NO_REBUILD=true ;;
-  esac
-done
+# Creates a swap file in the btrfs subvolume, adds the swap file to /etc/fstab,
+# adds a resume hook to mkinitcpio, and configures suspend-then-hibernate.
 
 if [[ ! -f /sys/power/image_size ]]; then
   echo -e "Hibernation is not supported on your system" >&2
   exit 0
 fi
 
-# When --no-rebuild is set, the caller is responsible for the UKI rebuild
-# (e.g. running before limine-mkinitcpio-hook is installed during initial
-# install), so we only require limine-mkinitcpio when we'd invoke it ourselves.
-if ! $NO_REBUILD && ! command -v limine-mkinitcpio &>/dev/null; then
+if ! command -v limine-mkinitcpio &>/dev/null; then
   echo "Skipping hibernation setup (requires Limine bootloader)"
   exit 0
 fi
@@ -39,14 +26,15 @@ if [[ -f $MKINITCPIO_CONF ]] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF";
       echo "Fixing empty resume_offset ($RESUME_OFFSET)"
       sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" "$RESUME_DROP_IN"
       sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" /etc/default/limine
-      $NO_REBUILD || sudo limine-mkinitcpio
+      sudo limine-mkinitcpio
+      sudo limine-update
     fi
   fi
   echo "Hibernation is already set up"
   exit 0
 fi
 
-if ! $FORCE; then
+if [[ $1 != "--force" ]]; then
   MEM_TOTAL_HUMAN=$(free --human | awk '/Mem/ {print $2}')
   if ! gum confirm "Use $MEM_TOTAL_HUMAN on boot drive to make hibernation available?"; then
     exit 0
@@ -117,16 +105,13 @@ if grep -q "\[s2idle\]" /sys/power/mem_sleep 2>/dev/null; then
   fi
 fi
 
-if ! $NO_REBUILD; then
-  # limine-mkinitcpio rebuilds initramfs/UKI for all kernels and updates the
-  # /boot/limine.conf entries via limine-entry-tool. The limine bootloader
-  # binary on the ESP doesn't change here, so we don't need limine-update
-  # (which would also re-deploy the binary and rebuild a second time).
-  echo "Regenerating initramfs..."
-  sudo limine-mkinitcpio
-  echo
-fi
+# Regenerate initramfs and boot entry
+echo "Regenerating initramfs..."
+sudo limine-mkinitcpio
+sudo limine-update
 
-if ! $FORCE && ! $NO_REBUILD && gum confirm "Reboot to enable hibernation?"; then
+echo
+
+if [[ $1 != "--force" ]] && gum confirm "Reboot to enable hibernation?"; then
   omarchy-system-reboot
 fi

bin/omarchy-hook

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Run a named hook, like post-update (available in ~/.config/omarchy/hooks/post-update).
-# omarchy:args=[name] [args...]
+# Run a named hook, like post-update (available in ~/.config/omarchy/hooks/post-update).
 
 set -e
 

bin/omarchy-hw-asus-expertbook-b9406

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Detect ASUS ExpertBook B9406 series laptops on Intel Panther Lake.
-
-omarchy-hw-match "B9406" && omarchy-hw-intel-ptl

bin/omarchy-hw-asus-rog

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Detect whether the computer is an Asus ROG machine.
+# Detect whether the computer is an Asus ROG machine.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "ASUSTeK COMPUTER INC." ]] &&
    grep -q "ROG" /sys/class/dmi/id/product_family 2>/dev/null

bin/omarchy-hw-dell-xps-oled

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Match Dell XPS systems with LG OLED panel on Intel Panther Lake (Xe3) GPU.
+# Match Dell XPS systems with LG OLED panel on Intel Panther Lake (Xe3) GPU.
 
 omarchy-hw-match "XPS" \
   && omarchy-hw-intel-ptl \

bin/omarchy-hw-external-monitors

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Returns true when an external monitor is physically connected.
-
-for status in /sys/class/drm/card*-*/status; do
-  [[ "$status" == *-eDP-*/status ]] && continue
-  [[ "$(<"$status")" == "connected" ]] && exit 0
-done
-exit 1

bin/omarchy-hw-framework16

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Detect whether the computer is a Framework Laptop 16.
+# Detect whether the computer is a Framework Laptop 16.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Framework" ]] &&
   omarchy-hw-match "Laptop 16"

bin/omarchy-hw-hybrid-gpu

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Detect whether the system has an active hybrid GPU configuration
-
-if command -v supergfxctl &>/dev/null; then
-  supergfxctl -s 2>/dev/null | grep -qw Hybrid
-else
-  (($(lspci | grep -cE 'VGA|3D|Display') >= 2))
-fi

bin/omarchy-hw-intel

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-# omarchy:summary=Detect whether the computer has an Intel CPU.
+# Detect whether the computer has an Intel CPU.
 
 [[ $(grep -m1 "vendor_id" /proc/cpuinfo 2>/dev/null | cut -d: -f2 | tr -d ' ') == "GenuineIntel" ]]

bin/omarchy-hw-intel-ptl

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-# omarchy:summary=Detect whether the computer has an Intel Panther Lake GPU.
+# Detect whether the computer has an Intel Panther Lake GPU.
 
 lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'

bin/omarchy-hw-match

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Match against the computer's DMI product name or product family (case-insensitive).
-# omarchy:args=<pattern>
+# Match against the computer's DMI product name (case-insensitive).
+# Usage: omarchy-hw-match "XPS"
 
-grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null ||
-grep -qi "$1" /sys/class/dmi/id/product_family 2>/dev/null
+grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null

bin/omarchy-hw-recover-internal-monitor

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Clear the internal-monitor-disable toggle if no external display is connected.
-
-TOGGLE="$HOME/.local/state/omarchy/toggles/hypr/internal-monitor-disable.conf"
-
-if [[ -f $TOGGLE ]] && ! omarchy-hw-external-monitors; then
-  rm -f "$TOGGLE"
-fi

bin/omarchy-hw-surface

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Detect whether the computer is a Microsoft Surface device.
+# Detect whether the computer is a Microsoft Surface device.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Microsoft Corporation" ]] &&
   omarchy-hw-match "Surface"

bin/omarchy-hw-touchpad

@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Print the detected Hyprland touchpad or trackpad device name
-
-device=$(hyprctl devices -j | jq -r '[.mice[] | .name | select(test("touchpad|trackpad"; "i"))] | first // empty')
-[[ -n $device ]] && echo "$device"

bin/omarchy-hw-touchscreen

@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Print the detected Hyprland touchscreen or tablet device name
-
-device=$(hyprctl devices -j | jq -r '[.touch[]?.name, .tablets[]?.name] | first // empty')
-[[ -n $device ]] && echo "$device"

bin/omarchy-hw-vulkan

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Detect whether Vulkan is available.
+# Detect whether Vulkan is available.
 
 [[ -d /usr/share/vulkan/icd.d ]] &&
   find /usr/share/vulkan/icd.d -maxdepth 1 -name "*.json" -print -quit | grep -q .

bin/omarchy-hyprland-active-window-transparency-toggle

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-# omarchy:summary=Toggles transparency for the currently focused window.
+# Toggles transparency for the currently focused window.
 
 hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle

bin/omarchy-hyprland-monitor-focused

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-# omarchy:summary=Print the name of the currently focused Hyprland monitor.
+# Print the name of the currently focused Hyprland monitor.
 
 hyprctl monitors -j | jq -r '.[] | select(.focused == true).name'

bin/omarchy-hyprland-monitor-focused-apple

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Return success if the focused Hyprland monitor is an Apple display.
-
-hyprctl monitors -j | jq -e '.[] | select(.focused == true) | select(.make == "Apple Computer Inc" and (.model | test("StudioDisplay|ProDisplayXDR")))' >/dev/null

bin/omarchy-hyprland-monitor-internal

@@ -1,46 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Enable, disable, toggle, or recover the internal laptop display
-# omarchy:args=<on|off|toggle|recover>
-
-TOGGLE="internal-monitor-disable"
-TOGGLE_FLAG="$HOME/.local/state/omarchy/toggles/hypr/$TOGGLE.conf"
-MIRROR_TOGGLE="internal-monitor-mirror"
-
-# Get internal monitor name dynamically
-INTERNAL=$(hyprctl monitors -j | jq -r '.[] | select(.name | contains("eDP")).name' | head -n 1)
-
-enable() {
-  if omarchy-hyprland-toggle-enabled "$TOGGLE"; then
-    omarchy-hyprland-toggle --disabled-notification "󰍹    Laptop display enabled" "$TOGGLE"
-  fi
-}
-
-disable() {
-  if ! omarchy-hw-external-monitors; then
-    notify-send -u low "󰍹    Can't disable the only active display"
-    exit 1
-  fi
-  if omarchy-hyprland-toggle-disabled "$TOGGLE" && omarchy-hyprland-toggle-disabled "$MIRROR_TOGGLE"; then
-    echo "monitor=$INTERNAL,disable" >"$TOGGLE_FLAG"
-    notify-send -u low "󰍹    Laptop display disabled"
-    hyprctl reload
-  fi
-}
-
-recover() {
-  if ! omarchy-hw-external-monitors && omarchy-hyprland-toggle-enabled "$TOGGLE"; then
-    omarchy-hyprland-toggle "$TOGGLE"
-  fi
-}
-
-case "$1" in
-  on) enable ;;
-  off) disable ;;
-  toggle) if omarchy-hyprland-toggle-enabled "$TOGGLE"; then enable; else disable; fi ;;
-  recover) recover ;;
-  *)
-    echo "Usage: $(basename "$0") {on|off|toggle|recover}" >&2
-    exit 1
-    ;;
-esac

bin/omarchy-hyprland-monitor-internal-disable

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+# Disable the internal laptop display. No-op if already disabled or if it
+# would leave no active display.
+
+if omarchy-hyprland-monitors-many; then
+  if omarchy-hyprland-toggle-disabled internal-monitor-disable; then
+    omarchy-hyprland-toggle --enabled-notification "󰍹    Laptop display disabled" internal-monitor-disable
+  fi
+else
+  notify-send -u low "󰍹    Can't disable the only active display"
+  exit 1
+fi

bin/omarchy-hyprland-monitor-internal-enable

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Enable the internal laptop display. No-op if already enabled.
+
+if omarchy-hyprland-toggle-enabled internal-monitor-disable; then
+  omarchy-hyprland-toggle --disabled-notification "󰍹    Laptop display enabled" internal-monitor-disable
+fi

bin/omarchy-hyprland-monitor-internal-mirror

@@ -1,58 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Enable, disable, toggle, or recover mirroring the internal display to an external monitor
-# omarchy:args=<on|off|toggle|recover>
-
-TOGGLE="internal-monitor-mirror"
-TOGGLE_FLAG="$HOME/.local/state/omarchy/toggles/hypr/$TOGGLE.conf"
-DISABLE_TOGGLE="internal-monitor-disable"
-
-# Get names dynamically
-INTERNAL=$(hyprctl monitors -j | jq -r '.[] | select(.name | contains("eDP")).name' | head -n 1)
-# Get the first available external monitor
-EXTERNAL=$(hyprctl monitors -j | jq -r '.[] | select(.name | contains("eDP") | not).name' | head -n 1)
-
-enable() {
-  if [[ -z "$EXTERNAL" ]]; then
-    notify-send -u low "󰍹    No external monitors found for mirror"
-    exit 1
-  fi
-
-  if [[ -z "$INTERNAL" ]]; then
-    notify-send -u low "󰍹    No laptop monitor found to mirror"
-    exit 1
-  fi
-
-  if omarchy-hyprland-toggle-enabled "$DISABLE_TOGGLE"; then
-    omarchy-hyprland-toggle "$DISABLE_TOGGLE"
-  fi
-
-  if omarchy-hyprland-toggle-disabled "$TOGGLE"; then
-    echo "monitor=$EXTERNAL, preferred, auto, 1, mirror, $INTERNAL" > "$TOGGLE_FLAG"
-    notify-send -u low "󰍹    Mirroring enabled ($EXTERNAL)"
-    hyprctl reload
-  fi
-}
-
-disable() {
-  if omarchy-hyprland-toggle-enabled "$TOGGLE"; then
-    omarchy-hyprland-toggle --disabled-notification "󰍹    Extended mode restored" "$TOGGLE"
-  fi
-}
-
-recover() {
-  if ! omarchy-hw-external-monitors && omarchy-hyprland-toggle-enabled "$TOGGLE"; then
-    omarchy-hyprland-toggle "$TOGGLE"
-  fi
-}
-
-case "$1" in
-  on) enable ;;
-  off) disable ;;
-  toggle) if omarchy-hyprland-toggle-enabled "$TOGGLE"; then disable; else enable; fi ;;
-  recover) recover ;;
-  *)
-    echo "Usage: $(basename "$0") {on|off|toggle|recover}" >&2
-    exit 1
-    ;;
-esac

bin/omarchy-hyprland-monitor-internal-recover

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Re-enable the internal display if it was toggled off and no external monitors
+# are currently active (e.g. external got disconnected live, during sleep, or
+# wasn't present on boot).
+
+if omarchy-hyprland-monitors-none && omarchy-hyprland-toggle-enabled internal-monitor-disable; then
+  omarchy-hyprland-monitor-internal-enable
+fi

bin/omarchy-hyprland-monitor-internal-toggle

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Toggle the internal laptop display on/off.
+
+if omarchy-hyprland-toggle-enabled internal-monitor-disable; then
+  omarchy-hyprland-monitor-internal-enable
+else
+  omarchy-hyprland-monitor-internal-disable
+fi

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Cycle scaling for the focused Hyprland monitor
-
+# Get the active monitor (the one with the cursor)
 MONITOR_INFO=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)')
 ACTIVE_MONITOR=$(echo "$MONITOR_INFO" | jq -r '.name')
 CURRENT_SCALE=$(echo "$MONITOR_INFO" | jq -r '.scale')
@@ -9,39 +8,15 @@ WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
 HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
 REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
 
-# Cycle through scales: 1 → 1.25 → 1.6 → 2 → 3 → 1 (or reverse with --reverse)
-SCALES=(1 1.25 1.6 2 3)
+# Cycle through scales: 1 → 1.6 → 2 → 3 → 1
+CURRENT_INT=$(awk -v s="$CURRENT_SCALE" 'BEGIN { printf "%.0f", s * 10 }')
 
-# Find the index of the scale closest to the current one (Hyprland may
-# snap fractional scales to nearby values, so we can't match exactly)
-CURRENT_IDX=$(awk -v s="$CURRENT_SCALE" -v list="${SCALES[*]}" 'BEGIN {
-  n = split(list, arr, " ")
-  best = 0; best_diff = 1e9
-  for (i = 1; i <= n; i++) {
-    d = s - arr[i]; if (d < 0) d = -d
-    if (d < best_diff) { best_diff = d; best = i - 1 }
-  }
-  print best
-}')
-
-if [[ "$1" == "--reverse" ]]; then
-  NEW_IDX=$(( (CURRENT_IDX - 1 + ${#SCALES[@]}) % ${#SCALES[@]} ))
-else
-  NEW_IDX=$(( (CURRENT_IDX + 1) % ${#SCALES[@]} ))
-fi
-
-NEW_SCALE=${SCALES[$NEW_IDX]}
+case "$CURRENT_INT" in
+10) NEW_SCALE=1.6 ;;
+16) NEW_SCALE=2 ;;
+20) NEW_SCALE=3 ;;
+*) NEW_SCALE=1 ;;
+esac
 
 hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
-
-# Persist to monitors.conf if the user has a single generic catch-all line
-# (ignoring disabled monitors), so the scale survives reboots.
-MONITOR_CONF="$HOME/.config/hypr/monitors.conf"
-if [[ -f $MONITOR_CONF ]]; then
-  mapfile -t ACTIVE_LINES < <(grep -E '^[[:space:]]*monitor=' "$MONITOR_CONF" | grep -vE 'disable[[:space:]]*$')
-  if [[ ${#ACTIVE_LINES[@]} -eq 1 ]] && [[ "${ACTIVE_LINES[0]}" =~ ^monitor=,preferred,auto, ]]; then
-    sed -i -E "s|^(monitor=,preferred,auto,).*|\\1${NEW_SCALE}|" "$MONITOR_CONF"
-  fi
-fi
-
 notify-send -u low "󰍹    Display scaling set to ${NEW_SCALE}x"

bin/omarchy-hyprland-monitor-watch

@@ -1,14 +1,14 @@
 #!/bin/bash
 
-# omarchy:summary=Watch Hyprland monitor events and recover monitor toggles when a monitor is removed
+# Listen on Hyprland's event socket and recover the internal display whenever
+# a monitor is removed.
 
 SOCKET="$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock"
 
 socat -U - "UNIX-CONNECT:$SOCKET" | while read -r event; do
   case "$event" in
     monitorremoved\>\>*|monitorremovedv2\>\>*)
-      omarchy-hyprland-monitor-internal recover
-      omarchy-hyprland-monitor-internal-mirror recover
+      omarchy-hyprland-monitor-internal-recover
       ;;
   esac
 done

bin/omarchy-hyprland-monitors-many

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Returns true when there are multiple monitors connected (so we can disable the internal one)
+
+(( $(hyprctl monitors -j 2>/dev/null | jq length) > 1 ))

bin/omarchy-hyprland-monitors-none

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Returns true when no monitors are connected
+
+(( $(hyprctl monitors -j 2>/dev/null | jq length) == 0 ))

bin/omarchy-hyprland-toggle

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Toggle permanent Hyprland flags by copying them into a directory that's sourced entirely.
-# omarchy:args=[--enabled-notification <text>] [--disabled-notification <text>] <flag-name>
+# Toggle permanent Hyprland flags by copying them into a directory that's sourced entirely.
 
 ENABLED_NOTIFICATION=""
 DISABLED_NOTIFICATION=""

bin/omarchy-hyprland-toggle-disabled

@@ -1,6 +1,5 @@
 #!/bin/bash
 
-# omarchy:summary=Check if a Hyprland toggle is currently disabled (missing).
-# omarchy:args=<flag-name>
+# Check if a Hyprland toggle is currently disabled (missing).
 
 [[ ! -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-toggle-enabled

@@ -1,6 +1,5 @@
 #!/bin/bash
 
-# omarchy:summary=Check if a Hyprland toggle is currently enabled.
-# omarchy:args=<flag-name>
+# Check if a Hyprland toggle is currently enabled.
 
 [[ -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-window-close-all

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Close all open windows
-
+# Close all open windows
 hyprctl clients -j | \
   jq -r ".[].address" | \
   xargs -I{} hyprctl dispatch closewindow address:{}

bin/omarchy-hyprland-window-gaps-toggle

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-# omarchy:summary=Toggles the window gaps globally between no gaps and the default.
+# Toggles the window gaps globally between no gaps and the default.
 
 omarchy-hyprland-toggle window-no-gaps

bin/omarchy-hyprland-window-pop

@@ -1,7 +1,19 @@
 #!/bin/bash
 
-# omarchy:summary=Toggle to pop-out a tile to stay fixed on a display basis.
-# omarchy:args=[width height x y]
+# Toggle to pop-out a tile to stay fixed on a display basis.
+
+# Usage:
+# omarchy-hyprland-window-pop [width height [x y]]
+#
+# Arguments:
+#   width   Optional. Width of the floating window. Default: 1300
+#   height  Optional. Height of the floating window. Default: 900
+#   x       Optional. X position of the window. Must provide both X and Y to take effect.
+#   y       Optional. Y position of the window. Must provide both X and Y to take effect.
+#
+# Behavior:
+#   - If the window is already pinned, it will be unpinned and removed from the pop layer.
+#   - If the window is not pinned, it will be floated, resized, moved/centered, pinned, brought to top, and popped.
 
 width=${1:-1300}
 height=${2:-900}

bin/omarchy-hyprland-window-single-square-aspect-toggle

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Toggle single-window square aspect ratio.
+# Toggle single-window square aspect ratio.
 
 omarchy-hyprland-toggle \
   --enabled-notification "      Enable single-window square aspect ratio" \

bin/omarchy-hyprland-workspace-layout-toggle

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Toggle the layout on the current active workspace between dwindle and scrolling
+# Toggle the layout on the current active workspace between dwindle and scrolling
 
 ACTIVE_WORKSPACE=$(hyprctl activeworkspace -j | jq -r '.id')
 CURRENT_LAYOUT=$(hyprctl activeworkspace -j | jq -r '.tiledLayout')

bin/omarchy-install-chromium-google-account

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Allow Chromium to sign in to Google accounts by adding the required OAuth credentials
+# Allow Chromium to sign in to Google accounts by adding the correct
+# oauth client id and secret to ~/.config/chromium-flags.conf.
 
 if [[ -f ~/.config/chromium-flags.conf ]]; then
   CONF=~/.config/chromium-flags.conf

bin/omarchy-install-dev-env

@@ -1,10 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Install a supported development environment
-# omarchy:name=dev-env
-# omarchy:args=<ruby|node|bun|deno|go|laravel|symfony|php|python|elixir|phoenix|rust|java|zig|ocaml|dotnet|clojure|scala>
-# omarchy:examples=omarchy install dev-env ruby | omarchy install dev-env node
-# omarchy:requires-sudo=true
+# Install one of the supported development environments. Usually called via Install > Development > * in the Omarchy Menu.
 
 if [[ -z $1 ]]; then
   echo "Usage: omarchy-install-dev-env <ruby|node|bun|deno|go|laravel|symfony|php|python|elixir|phoenix|rust|java|zig|ocaml|dotnet|clojure|scala>" >&2

bin/omarchy-install-docker-dbs

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Install one of the supported databases in a Docker container with the suitable development options.
-# omarchy:requires-sudo=true
+# Install one of the supported databases in a Docker container with the suitable development options.
+# Usually called via Install > Development > Docker DB from the Omarchy Menu.
 
 options=("MySQL" "PostgreSQL" "Redis" "MongoDB" "MariaDB" "MSSQL")
 

bin/omarchy-install-dropbox

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Install and start the Dropbox service. Must then be authenticated via the web.
+# Install and start the Dropbox service. Must then be authenticated via the web.
 
 echo "Installing all dependencies..."
 omarchy-pkg-add dropbox dropbox-cli libappindicator-gtk3 python-gpgme nautilus-dropbox

bin/omarchy-install-geforce-now

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Install and launch Geforce Now.
+# Install and launch Geforce Now.
 
 set -e
 

bin/omarchy-install-helix

@@ -1,28 +0,0 @@
-#!/bin/bash
-
-# Install Helix and configure it to use the current Omarchy theme.
-
-echo "Installing Helix..."
-omarchy-pkg-add helix
-
-mkdir -p ~/.config/helix/themes
-
-# Symlink the rendered Omarchy theme so Helix tracks the active theme
-ln -sf ~/.config/omarchy/current/theme/helix.toml ~/.config/helix/themes/omarchy.toml
-
-# Only seed a config.toml if the user does not already have one
-if [[ ! -f ~/.config/helix/config.toml ]]; then
-  cat >~/.config/helix/config.toml <<'EOF'
-theme = "omarchy"
-EOF
-fi
-
-# Ensure the symlink target exists for users whose current theme predates this template
-if [[ ! -e ~/.config/omarchy/current/theme/helix.toml ]]; then
-  omarchy-theme-refresh
-fi
-
-# Arch-based distros ship Helix as 'helix' rather than the upstream 'hx'.
-if ! grep -q '^alias hx="helix"' ~/.bashrc 2>/dev/null; then
-  echo 'alias hx="helix"' >>~/.bashrc
-fi

bin/omarchy-install-nordvpn

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Install the NordVPN service with optional GUI.
-# omarchy:requires-sudo=true
+# Install the NordVPN service with optional GUI.
 
 echo "Installing NordVPN..."
 omarchy-pkg-aur-add nordvpn-bin

bin/omarchy-install-once

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Install the ONCE service, enable its background service, and launch the TUI.
-# omarchy:requires-sudo=true
+# Install the ONCE service, enable its background service, and launch the TUI.
 
 echo "Installing ONCE..."
 omarchy-pkg-add once-bin

bin/omarchy-install-steam

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Install Steam and graphics drivers selected for this system
-# omarchy:requires-sudo=true
+# Install and launch Steam after first letting the user pick the correct grahics card drivers.
 
 set -e
 

bin/omarchy-install-tailscale

@@ -1,13 +1,10 @@
 #!/bin/bash
 
-# omarchy:summary=Install the Tailscale mesh VPN service and a web app for the Tailscale Admin Console.
-# omarchy:requires-sudo=true
+# Install the Tailscale mesh VPN service and a web app for the Tailscale Admin Console.
 
-echo -e "\nInstalling Tailscale..."
-omarchy-pkg-add tailscale
+curl -fsSL https://tailscale.com/install.sh | sh
 
 echo -e "\nStarting Tailscale..."
-sudo systemctl enable --now tailscaled.service
 sudo tailscale up --accept-routes
 
 omarchy-webapp-install "Tailscale" "https://login.tailscale.com/admin/machines" https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png

bin/omarchy-install-terminal

@@ -1,8 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Install one of the approved terminals and set it as the default for Omarchy (Super + Return etc).
-# omarchy:args=<alacritty|ghostty|kitty>
-# omarchy:requires-sudo=true
+# Install one of the approved terminals and set it as the default for Omarchy (Super + Return etc).
 
 if (($# == 0)); then
   echo "Usage: omarchy-install-terminal [alacritty|ghostty|kitty]"

bin/omarchy-install-vscode

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Install VS Code and configure Omarchy defaults for secrets, updates, and theme
+# Install VSCode and configure it to use the gnome-libsecret password store, not to update automatically, and to use the current Omarchy theme.
 
 echo "Installing VSCode..."
 omarchy-pkg-add visual-studio-code-bin

bin/omarchy-install-xbox-controllers

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Install support for using Xbox controllers with Steam/RetroArch/etc.
-# omarchy:requires-sudo=true
+# Install support for using Xbox controllers with Steam/RetroArch/etc.
 
 set -e
 

bin/omarchy-launch-about

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-# omarchy:summary=Launch the fastfetch TUI that gives information about the current system.
+# Launch the fastfetch TUI that gives information about the current system.
 
 exec omarchy-launch-or-focus-tui "bash -c 'fastfetch; read -n 1 -s'"

bin/omarchy-launch-audio

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-# omarchy:summary=Launch the Omarchy audio controls TUI (provided by wiremix).
+# Launch the Omarchy audio controls TUI (provided by wiremix).
 
 omarchy-launch-or-focus-tui wiremix

bin/omarchy-launch-bluetooth

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Launch the Omarchy bluetooth controls TUI (provided by bluetui).
+# Launch the Omarchy bluetooth controls TUI (provided by bluetui).
+# Also attempts to unblock bluetooth service if rfkill had blocked it.
 
 rfkill unblock bluetooth
 exec omarchy-launch-or-focus-tui bluetui

bin/omarchy-launch-browser

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Launch the default browser as determined by xdg-settings.
-# omarchy:args=[url]
+# Launch the default browser as determined by xdg-settings.
+# Automatically converts --private into the correct flag for the given browser.
 
 default_browser=$(xdg-settings get default-web-browser)
 browser_exec=$(sed -n 's/^Exec=\([^ ]*\).*/\1/p' {~/.local,~/.nix-profile,/usr}/share/applications/$default_browser 2>/dev/null | head -1)

bin/omarchy-launch-editor

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Launch the default editor as determined by $EDITOR (set via ~/.config/uwsm/default) (or nvim if missing).
-# omarchy:args=<path>
+# Launch the default editor as determined by $EDITOR (set via ~/.config/uwsm/default) (or nvim if missing).
+# Starts suitable editors in a terminal window and otherwise as a regular application.
 
 omarchy-cmd-present "$EDITOR" || EDITOR=nvim
 

bin/omarchy-launch-floating-terminal-with-presentation

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Launch a floating terminal with the Omarchy presentation wrapper
-# omarchy:args=<command>
+# Launch a floating terminal with the Omarchy logo presentation, then execute the command passed in, and finally end with the omarchy-show-done presentation.
+# Used by actions such as Update System.
 
 cmd="$*"
 exec setsid uwsm-app -- xdg-terminal-exec --app-id=org.omarchy.terminal --title=Omarchy -e bash -c "omarchy-show-logo; $cmd; if (( \$? != 130 )); then omarchy-show-done; fi"

bin/omarchy-launch-or-focus

@@ -1,7 +1,7 @@
 #!/bin/bash
 
-# omarchy:summary=Launch an app or focus an existing window matching a pattern
-# omarchy:args=<window-pattern> <launch-command>
+# Launch or focus on a given command identified by the passed in window-pattern.
+# Use by some default bindings, like the one for Spotify, to ensure there is only one instance of the application open.
 
 if (($# == 0)); then
   echo "Usage: omarchy-launch-or-focus [window-pattern] [launch-command]"