Remove the migration too

But a bios update to the XPS should.

bin/omarchy-ac-present

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Returns true if AC power is connected.
+
+for ac in /sys/class/power_supply/AC* /sys/class/power_supply/ADP*; do
+  [[ -r $ac/online && $(cat "$ac/online") == "1" ]] && exit 0
+done
+
+exit 1

bin/omarchy-battery-capacity

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+# Returns the battery full capacity in Wh (rounded to whole number).
+# Used by omarchy-battery-status for displaying battery capacity.
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+echo "$battery_info" | awk '/energy-full:/ {
+    printf "%d", $2
+    exit
+}'

bin/omarchy-battery-monitor

@@ -9,6 +9,7 @@ BATTERY_STATE=$(upower -i $(upower -e | grep 'BAT') | grep -E "state" | awk '{pr
 
 send_notification() {
   notify-send -u critical "󱐋 Time to recharge!" "Battery is down to ${1}%" -i battery-caution -t 30000
+  omarchy-hook battery-low "$1"
 }
 
 if [[ -n $BATTERY_LEVEL && $BATTERY_LEVEL =~ ^[0-9]+$ ]]; then

bin/omarchy-battery-remaining-time

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Returns the battery time remaining (to empty or full) in a compact format.
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+echo "$battery_info" | awk '/time to (empty|full)/ {
+    value = $4
+    unit = $5
+    if (unit ~ /^minute/) {
+        printf "%dm", int(value)
+    } else {
+        hours = int(value)
+        minutes = int((value - hours) * 60)
+        if (minutes > 0) {
+            printf "%dh %dm", hours, minutes
+        } else {
+            printf "%dh", hours
+        }
+    }
+    exit
+}'

bin/omarchy-battery-status

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+# Returns a formatted battery status string with percentage and power draw/charge.
+# Used by the battery notification hotkey (Ctrl + Shift + Super + B).
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+percentage=$(echo "$battery_info" | awk '/percentage/ {
+    print int($2)
+    exit
+}')
+
+power_rate=$(echo "$battery_info" | awk '/energy-rate/ {
+    rounded = sprintf("%.1f", $2)
+    sub(/\.0$/, "", rounded)
+    print rounded
+    exit
+}')
+
+state=$(echo "$battery_info" | awk '/state/ { print $2; exit }')
+time_remaining=$(omarchy-battery-remaining-time)
+capacity=$(omarchy-battery-capacity)
+
+if [[ $state == "charging" ]]; then
+    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} to full  ·   ${power_rate}W / ${capacity}Wh"
+else
+    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} left  ·   ${power_rate}W / ${capacity}Wh"
+fi

bin/omarchy-brightness-keyboard

@@ -23,14 +23,19 @@ fi
 max_brightness="$(brightnessctl -d "$device" max)"
 current_brightness="$(brightnessctl -d "$device" get)"
 
-# Calculate step as one unit (keyboards typically have discrete levels like 0-3).
+# Calculate step as 10% of max brightness. Keyboards with many levels (e.g. 512)
+# need larger steps; keyboards with few levels (e.g. 3) fall back to step=1.
+step=$(( max_brightness / 10 ))
+(( step < 1 )) && step=1
+
 if [[ $direction == "cycle" ]]; then
-  new_brightness=$(( (current_brightness + 1) % (max_brightness + 1) ))
+  new_brightness=$(( current_brightness + step ))
+  (( new_brightness > max_brightness )) && new_brightness=0
 elif [[ $direction == "up" ]]; then
-  new_brightness=$((current_brightness + 1))
+  new_brightness=$(( current_brightness + step ))
   (( new_brightness > max_brightness )) && new_brightness=$max_brightness
 else
-  new_brightness=$((current_brightness - 1))
+  new_brightness=$(( current_brightness - step ))
   (( new_brightness < 0 )) && new_brightness=0
 fi
 

bin/omarchy-cmd-audio-switch

@@ -2,7 +2,7 @@
 
 # Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.
 
-focused_monitor="$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"
+focused_monitor=$(omarchy-hyprland-monitor-focused)
 
 sinks=$(pactl -f json list sinks | jq '[.[] | select((.ports | length == 0) or ([.ports[]? | .availability != "not available"] | any))]')
 sinks_count=$(echo "$sinks" | jq '. | length')

bin/omarchy-cmd-mic-mute

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Toggle microphone mute. Dell XPS systems get special handling for the hardware LED.
+
+if omarchy-hw-match "XPS"; then
+  omarchy-cmd-mic-mute-xps
+else
+  swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)" --input-volume mute-toggle
+fi

bin/omarchy-cmd-mic-mute-xps

@@ -0,0 +1,44 @@
+#!/bin/bash
+
+# Toggle microphone mute on Dell XPS systems. Uses wpctl for reliable toggling
+# and syncs the ALSA capture switch so the hardware mic mute LED follows state.
+
+wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
+
+if pactl get-source-mute @DEFAULT_SOURCE@ | rg -q 'yes'; then
+  alsa_value='off,off'
+  osd_message='Microphone muted'
+  osd_icon='microphone-sensitivity-muted-symbolic'
+else
+  alsa_value='on,on'
+  osd_message='Microphone on'
+  osd_icon='audio-input-microphone-symbolic'
+fi
+
+if [[ -e /sys/class/leds/platform::micmute/brightness ]]; then
+  default_source=$(pactl get-default-source)
+  alsa_card=$(pactl -f json list sources | jq -r --arg source "$default_source" '
+    .[] | select(.name == $source) |
+    .properties["alsa.card"] // .properties["api.alsa.card"] // .properties["api.alsa.pcm.card"] // empty
+  ' | head -1)
+
+  if [[ -n $alsa_card ]]; then
+    cards=("$alsa_card")
+  else
+    mapfile -t cards < <(compgen -G '/proc/asound/card*' | rg -o 'card[0-9]+' | sed 's/card//' | sort -u)
+  fi
+
+  for card in "${cards[@]}"; do
+    while IFS= read -r control; do
+      if [[ $control != *"Jack Microphone"* ]]; then
+        amixer -c "$card" cset "$control" "$alsa_value" >/dev/null 2>&1 || true
+        break 2
+      fi
+    done < <(amixer -c "$card" controls 2>/dev/null | rg -o "name='[^']*Microphone Capture Switch'")
+  done
+fi
+
+swayosd-client \
+  --monitor "$(omarchy-hyprland-monitor-focused)" \
+  --custom-message "$osd_message" \
+  --custom-icon "$osd_icon"

bin/omarchy-cmd-screenrecord

@@ -2,6 +2,8 @@
 
 # Start and stop a screenrecording, which will be saved to ~/Videos by default.
 # Alternative location can be set via OMARCHY_SCREENRECORD_DIR or XDG_VIDEOS_DIR ENVs.
+# Resolution is capped to 4K for monitors above 4K, native otherwise.
+# Override via --resolution= (e.g. --resolution=1920x1080, --resolution=0x0 for native).
 
 [[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
 OUTPUT_DIR="${OMARCHY_SCREENRECORD_DIR:-${XDG_VIDEOS_DIR:-$HOME/Videos}}"
@@ -15,28 +17,27 @@ DESKTOP_AUDIO="false"
 MICROPHONE_AUDIO="false"
 WEBCAM="false"
 WEBCAM_DEVICE=""
+RESOLUTION=""
 STOP_RECORDING="false"
+RECORDING_FILE="/tmp/omarchy-screenrecord-filename"
 
 for arg in "$@"; do
   case "$arg" in
-    --with-desktop-audio) DESKTOP_AUDIO="true" ;;
-    --with-microphone-audio) MICROPHONE_AUDIO="true" ;;
-    --with-webcam) WEBCAM="true" ;;
-    --webcam-device=*) WEBCAM_DEVICE="${arg#*=}" ;;
-    --stop-recording) STOP_RECORDING="true"
+  --with-desktop-audio) DESKTOP_AUDIO="true" ;;
+  --with-microphone-audio) MICROPHONE_AUDIO="true" ;;
+  --with-webcam) WEBCAM="true" ;;
+  --webcam-device=*) WEBCAM_DEVICE="${arg#*=}" ;;
+  --resolution=*) RESOLUTION="${arg#*=}" ;;
+  --stop-recording) STOP_RECORDING="true" ;;
   esac
 done
 
-cleanup_webcam() {
-  pkill -f "WebcamOverlay" 2>/dev/null
-}
-
 start_webcam_overlay() {
   cleanup_webcam
 
   # Auto-detect first available webcam if none specified
   if [[ -z $WEBCAM_DEVICE ]]; then
-    WEBCAM_DEVICE=$(v4l2-ctl --list-devices 2>/dev/null | grep -m1 "^\s*/dev/video" | tr -d '\t')
+    WEBCAM_DEVICE=$(v4l2-ctl --list-devices 2>/dev/null | grep -m1 "^[[:space:]]*/dev/video" | tr -d '\t')
     if [[ -z $WEBCAM_DEVICE ]]; then
       notify-send "No webcam devices found" -u critical -t 3000
       return 1
@@ -62,7 +63,7 @@ start_webcam_overlay() {
   done
 
   ffplay -f v4l2 $video_size_arg -framerate 30 "$WEBCAM_DEVICE" \
-    -vf "scale=${target_width}:-1" \
+    -vf "crop=iw/2:ih,scale=${target_width}:-1" \
     -window_title "WebcamOverlay" \
     -noborder \
     -fflags nobuffer -flags low_delay \
@@ -71,10 +72,24 @@ start_webcam_overlay() {
   sleep 1
 }
 
+cleanup_webcam() {
+  pkill -f "WebcamOverlay" 2>/dev/null
+}
+
+default_resolution() {
+  local width height
+  read -r width height < <(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | "\(.width) \(.height)"')
+  if ((width > 3840 || height > 2160)); then
+    echo "3840x2160"
+  else
+    echo "0x0"
+  fi
+}
+
 start_screenrecording() {
   local filename="$OUTPUT_DIR/screenrecording-$(date +'%Y-%m-%d_%H-%M-%S').mp4"
   local audio_devices=""
-  local audio_args=""
+  local audio_args=()
 
   [[ $DESKTOP_AUDIO == "true" ]] && audio_devices+="default_output"
 
@@ -84,15 +99,71 @@ start_screenrecording() {
     audio_devices+="default_input"
   fi
 
-  [[ -n $audio_devices ]] && audio_args+="-a $audio_devices"
+  [[ -n $audio_devices ]] && audio_args+=(-a "$audio_devices" -ac aac)
+
+  local resolution="${RESOLUTION:-$(default_resolution)}"
+
+  gpu-screen-recorder -w portal -k auto -s "$resolution" -f 60 -fm cfr -fallback-cpu-encoding yes -o "$filename" "${audio_args[@]}" &
+  local pid=$!
+
+  # Wait for recording to actually start (file appears after portal selection)
+  while kill -0 $pid 2>/dev/null && [[ ! -f $filename ]]; do
+    sleep 0.2
+  done
+
+  if kill -0 $pid 2>/dev/null; then
+    echo "$filename" >"$RECORDING_FILE"
+    toggle_screenrecording_indicator
+  fi
+}
+
+stop_screenrecording() {
+  pkill -SIGINT -f "^gpu-screen-recorder" # SIGINT required to save video properly
+
+  # Wait a maximum of 5 seconds to finish before hard killing
+  local count=0
+  while pgrep -f "^gpu-screen-recorder" >/dev/null && ((count < 50)); do
+    sleep 0.1
+    count=$((count + 1))
+  done
 
-  gpu-screen-recorder -w portal -k h264 -f 60 -fallback-cpu-encoding yes -o "$filename" $audio_args -ac aac &
   toggle_screenrecording_indicator
+  cleanup_webcam
+
+  if pgrep -f "^gpu-screen-recorder" >/dev/null; then
+    pkill -9 -f "^gpu-screen-recorder"
+    notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
+  else
+    trim_first_frame
+    local filename=$(cat "$RECORDING_FILE" 2>/dev/null)
+    local preview="${filename%.mp4}-preview.png"
+
+    # Generate a preview thumbnail from the first frame
+    ffmpeg -y -i "$filename" -ss 00:00:00.1 -vframes 1 -q:v 2 "$preview" -loglevel quiet 2>/dev/null
+
+    (
+      ACTION=$(notify-send "Screen recording saved" "Open with Super + Alt + , (or click this)" -t 10000 -i "${preview:-$filename}" -A "default=open")
+      [[ $ACTION == "default" ]] && mpv "$filename"
+      rm -f "$preview"
+    ) &
+  fi
+
+  rm -f "$RECORDING_FILE"
+}
+
+toggle_screenrecording_indicator() {
+  pkill -RTMIN+8 waybar
+}
+
+screenrecording_active() {
+  pgrep -f "^gpu-screen-recorder" >/dev/null
 }
 
 trim_first_frame() {
-  local latest=$(ls -t "$OUTPUT_DIR"/screenrecording-*.mp4 2>/dev/null | head -1)
-  if [[ -n $latest ]]; then
+  local latest
+  latest=$(cat "$RECORDING_FILE" 2>/dev/null)
+
+  if [[ -n $latest && -f $latest ]]; then
     local trimmed="${latest%.mp4}-trimmed.mp4"
     if ffmpeg -y -ss 0.1 -i "$latest" -c copy "$trimmed" -loglevel quiet 2>/dev/null; then
       mv "$trimmed" "$latest"
@@ -102,46 +173,12 @@ trim_first_frame() {
   fi
 }
 
-stop_screenrecording() {
-  pkill -SIGINT -f "^gpu-screen-recorder"  # SIGINT required to save video properly
-
-  # Wait a maximum of 5 seconds to finish before hard killing
-  local count=0
-  while pgrep -f "^gpu-screen-recorder" >/dev/null && (( count < 50 )); do
-    sleep 0.1
-    count=$((count + 1))
-  done
-
-  if pgrep -f "^gpu-screen-recorder" >/dev/null; then
-    pkill -9 -f "^gpu-screen-recorder"
-    cleanup_webcam
-    notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
-  else
-    cleanup_webcam
-    trim_first_frame
-    notify-send "Screen recording saved to $OUTPUT_DIR" -t 2000
-  fi
-  toggle_screenrecording_indicator
-}
-
-toggle_screenrecording_indicator() {
-  pkill -RTMIN+8 waybar
-}
-
-screenrecording_active() {
-  pgrep -f "^gpu-screen-recorder" >/dev/null || pgrep -f "WebcamOverlay" >/dev/null
-}
-
 if screenrecording_active; then
-  if pgrep -f "WebcamOverlay" >/dev/null && ! pgrep -f "^gpu-screen-recorder" >/dev/null; then
-    cleanup_webcam
-  else
-    stop_screenrecording
-  fi
-elif [[ $STOP_RECORDING == "false" ]]; then
+  stop_screenrecording
+elif [[ $STOP_RECORDING == "true" ]]; then
+  exit 1
+else
   [[ $WEBCAM == "true" ]] && start_webcam_overlay
 
   start_screenrecording || cleanup_webcam
-else
-  exit 1
 fi

bin/omarchy-cmd-screenshot

@@ -8,8 +8,8 @@
 OUTPUT_DIR="${OMARCHY_SCREENSHOT_DIR:-${XDG_PICTURES_DIR:-$HOME/Pictures}}"
 
 if [[ ! -d $OUTPUT_DIR ]]; then
-  notify-send "Screenshot directory does not exist: $OUTPUT_DIR" -u critical -t 3000
-  exit 1
+  mkdir -p "$OUTPUT_DIR"
+  notify-send "Created screenshot directory: $OUTPUT_DIR" -u normal -t 2000
 fi
 
 pkill slurp && exit 0
@@ -65,27 +65,30 @@ get_rectangles() {
 
 # Select based on mode
 case "$MODE" in
-  region)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(slurp 2>/dev/null)
-    kill $PID 2>/dev/null
-    ;;
-  windows)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
-    kill $PID 2>/dev/null
-    ;;
-  fullscreen)
-    SELECTION=$(hyprctl monitors -j | jq -r "${JQ_MONITOR_GEO} .[] | select(.focused == true) | format_geo")
-    ;;
-  smart|*)
-    RECTS=$(get_rectangles)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
-    kill $PID 2>/dev/null
+region)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(slurp 2>/dev/null)
+  kill $PID 2>/dev/null
+  ;;
+windows)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
+  kill $PID 2>/dev/null
+  ;;
+fullscreen)
+  SELECTION=$(hyprctl monitors -j | jq -r "${JQ_MONITOR_GEO} .[] | select(.focused == true) | format_geo")
+  ;;
+smart | *)
+  RECTS=$(get_rectangles)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
+  kill $PID 2>/dev/null
 
   # If the selection area is L * W < 20, we'll assume you were trying to select whichever
   # window or output it was inside of to prevent accidental 2px snapshots

bin/omarchy-font-set

@@ -33,7 +33,7 @@ if [[ -n $font_name ]]; then
     omarchy-restart-swayosd
 
     if pgrep -x ghostty; then
-      notify-send "    You must restart Ghostty to see font change"
+      notify-send -u low "    You must restart Ghostty to see font change"
     fi
 
     omarchy-hook font-set "$font_name"

bin/omarchy-haptic-touchpad

@@ -0,0 +1,94 @@
+#!/usr/bin/env python3
+
+"""Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
+
+Monitors touchpad button press events and sends haptic pulses via HID
+feature reports. Required because the kernel's HID haptic subsystem only
+supports Auto Trigger with waveform enumeration, not the simpler Manual
+Trigger protocol used by these Synaptics touchpads.
+"""
+
+import fcntl, glob, os, struct, sys
+
+VENDOR = "06CB"
+REPORT_ID = 0x37
+INTENSITY = 40  # 0-100
+
+# input_event: struct timeval (16 bytes on 64-bit) + type(H) + code(H) + value(i)
+EVENT_FORMAT = "llHHi"
+EVENT_SIZE = struct.calcsize(EVENT_FORMAT)
+EV_KEY = 0x01
+BTN_LEFT = 272
+BTN_RIGHT = 273
+BTN_MIDDLE = 274
+
+# ioctl: HIDIOCSFEATURE(len) = _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+def HIDIOCSFEATURE(length):
+    return 0xC0000000 | (length << 16) | (ord("H") << 8) | 0x06
+
+
+def find_hidraw():
+    for path in sorted(glob.glob("/sys/class/hidraw/hidraw*")):
+        uevent = os.path.join(path, "device", "uevent")
+        try:
+            with open(uevent) as f:
+                content = f.read().upper()
+            if f"0000{VENDOR}" in content:
+                return os.path.join("/dev", os.path.basename(path))
+        except OSError:
+            continue
+    return None
+
+
+def find_touchpad_event():
+    for path in sorted(glob.glob("/sys/class/input/event*/device/name")):
+        try:
+            with open(path) as f:
+                name = f.read().strip().upper()
+            if VENDOR in name and "TOUCHPAD" in name:
+                event = path.split("/")[-3]
+                return os.path.join("/dev/input", event)
+        except OSError:
+            continue
+    return None
+
+
+def main():
+    hidraw = find_hidraw()
+    if not hidraw:
+        print("No Synaptics haptic touchpad hidraw device found", file=sys.stderr)
+        sys.exit(1)
+
+    event = find_touchpad_event()
+    if not event:
+        print("No Synaptics haptic touchpad input device found", file=sys.stderr)
+        sys.exit(1)
+
+    print(f"Haptic touchpad: hidraw={hidraw} input={event} intensity={INTENSITY}", flush=True)
+
+    haptic_report = struct.pack("BB", REPORT_ID, INTENSITY)
+    ioctl_req = HIDIOCSFEATURE(len(haptic_report))
+
+    hidraw_fd = os.open(hidraw, os.O_RDWR)
+    event_fd = os.open(event, os.O_RDONLY)
+
+    try:
+        while True:
+            data = os.read(event_fd, EVENT_SIZE)
+            if len(data) < EVENT_SIZE:
+                continue
+            _, _, ev_type, code, value = struct.unpack(EVENT_FORMAT, data)
+            if ev_type == EV_KEY and code in (BTN_LEFT, BTN_RIGHT, BTN_MIDDLE) and value == 1:
+                try:
+                    fcntl.ioctl(hidraw_fd, ioctl_req, haptic_report)
+                except OSError:
+                    pass
+    except KeyboardInterrupt:
+        pass
+    finally:
+        os.close(event_fd)
+        os.close(hidraw_fd)
+
+
+if __name__ == "__main__":
+    main()

bin/omarchy-hibernation-setup

@@ -14,9 +14,22 @@ if ! command -v limine-mkinitcpio &>/dev/null; then
 fi
 
 MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
+SWAP_FILE="/swap/swapfile"
+RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
 
 # Check if hibernation is already configured
 if [[ -f $MKINITCPIO_CONF ]] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
+  # Fix empty resume_offset if btrfs map-swapfile failed during initial setup
+  if [[ -f $RESUME_DROP_IN ]] && grep -q 'resume_offset="$' "$RESUME_DROP_IN" && [[ -f $SWAP_FILE ]]; then
+    RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE" 2>/dev/null)
+    if [[ -n $RESUME_OFFSET ]]; then
+      echo "Fixing empty resume_offset ($RESUME_OFFSET)"
+      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" "$RESUME_DROP_IN"
+      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" /etc/default/limine
+      sudo limine-mkinitcpio
+      sudo limine-update
+    fi
+  fi
   echo "Hibernation is already set up"
   exit 0
 fi
@@ -29,7 +42,6 @@ if [[ $1 != "--force" ]]; then
 fi
 
 SWAP_SUBVOLUME="/swap"
-SWAP_FILE="$SWAP_SUBVOLUME/swapfile"
 
 # Create btrfs subvolume for swap
 if ! sudo btrfs subvolume show "$SWAP_SUBVOLUME" &>/dev/null; then
@@ -68,14 +80,18 @@ sudo cp -p "$OMARCHY_PATH/default/systemd/system-sleep/keyboard-backlight" /usr/
 
 # Add resume= kernel parameters so the initramfs resume hook knows where to find the
 # hibernation image. Without these, resume happens late (after GPU drivers load) and fails.
-RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
 if [[ ! -f $RESUME_DROP_IN ]]; then
   echo "Adding resume kernel parameters"
   sudo swapon -p 0 "$SWAP_FILE" 2>/dev/null
   RESUME_DEVICE=$(findmnt -no SOURCE -T "$SWAP_FILE" | sed 's/\[.*\]//')
-  RESUME_OFFSET=$(btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
-  sudo mkdir -p /etc/limine-entry-tool.d
-  echo "KERNEL_CMDLINE[default]+=\"resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+  RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
+  if [[ -n $RESUME_OFFSET ]]; then
+    sudo mkdir -p /etc/limine-entry-tool.d
+    echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+    sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
+  else
+    echo "Warning: Could not determine resume offset for $SWAP_FILE" >&2
+  fi
 fi
 
 # Use ACPI alarm for RTC wakeup on s2idle systems (needed for suspend-then-hibernate)
@@ -84,7 +100,8 @@ if grep -q "\[s2idle\]" /sys/power/mem_sleep 2>/dev/null; then
   if [[ ! -f $LIMINE_DROP_IN ]]; then
     echo "Enabling ACPI RTC alarm for s2idle suspend"
     sudo mkdir -p /etc/limine-entry-tool.d
-    echo 'KERNEL_CMDLINE[default]+="rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
+    echo 'KERNEL_CMDLINE[default]+=" rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
+    sudo tee -a /etc/default/limine < "$LIMINE_DROP_IN" >/dev/null
   fi
 fi
 

bin/omarchy-hw-dell-xps-oled

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Match Dell XPS systems with LG OLED panel on Intel Panther Lake (Xe3) GPU.
+
+omarchy-hw-match "XPS" \
+  && omarchy-hw-intel-ptl \
+  && test "$(od -An -tx1 -j8 -N2 /sys/class/drm/card*-eDP-*/edid 2>/dev/null | tr -d ' \n')" = "30e4"

bin/omarchy-hw-framework16

@@ -3,4 +3,4 @@
 # Detect whether the computer is a Framework Laptop 16.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Framework" ]] &&
-  grep -q "Laptop 16" /sys/class/dmi/id/product_name 2>/dev/null
+  omarchy-hw-match "Laptop 16"

bin/omarchy-hw-intel

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Detect whether the computer has an Intel CPU.
+
+[[ $(grep -m1 "vendor_id" /proc/cpuinfo 2>/dev/null | cut -d: -f2 | tr -d ' ') == "GenuineIntel" ]]

bin/omarchy-hw-intel-ptl

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Detect whether the computer has an Intel Panther Lake GPU.
+
+lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'

bin/omarchy-hw-match

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# Match against the computer's DMI product name (case-insensitive).
+# Usage: omarchy-hw-match "XPS"
+
+grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null

bin/omarchy-hw-surface

@@ -3,4 +3,4 @@
 # Detect whether the computer is a Microsoft Surface device.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Microsoft Corporation" ]] &&
-  grep -q "Surface" /sys/class/dmi/id/product_name 2>/dev/null
+  omarchy-hw-match "Surface"

bin/omarchy-hw-vulkan

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# Detect whether Vulkan is available.
+
+[[ -d /usr/share/vulkan/icd.d ]] &&
+  find /usr/share/vulkan/icd.d -maxdepth 1 -name "*.json" -print -quit | grep -q .

bin/omarchy-hyprland-active-window-transparency-toggle

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Toggles transparency for the currently focused window.
+
+hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle

bin/omarchy-hyprland-monitor-focused

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Print the name of the currently focused Hyprland monitor.
+
+hyprctl monitors -j | jq -r '.[] | select(.focused == true).name'

bin/omarchy-hyprland-monitor-internal-disable

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+# Disable the internal laptop display. No-op if already disabled or if it
+# would leave no active display.
+
+if omarchy-hyprland-monitors-many; then
+  if omarchy-hyprland-toggle-disabled internal-monitor-disable; then
+    omarchy-hyprland-toggle --enabled-notification "󰍹    Laptop display disabled" internal-monitor-disable
+  fi
+else
+  notify-send -u low "󰍹    Can't disable the only active display"
+  exit 1
+fi

bin/omarchy-hyprland-monitor-internal-enable

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Enable the internal laptop display. No-op if already enabled.
+
+if omarchy-hyprland-toggle-enabled internal-monitor-disable; then
+  omarchy-hyprland-toggle --disabled-notification "󰍹    Laptop display enabled" internal-monitor-disable
+fi

bin/omarchy-hyprland-monitor-internal-recover

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Re-enable the internal display if it was toggled off and no external monitors
+# are currently active (e.g. external got disconnected live, during sleep, or
+# wasn't present on boot).
+
+if omarchy-hyprland-monitors-none && omarchy-hyprland-toggle-enabled internal-monitor-disable; then
+  omarchy-hyprland-monitor-internal-enable
+fi

bin/omarchy-hyprland-monitor-internal-toggle

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Toggle the internal laptop display on/off.
+
+if omarchy-hyprland-toggle-enabled internal-monitor-disable; then
+  omarchy-hyprland-monitor-internal-enable
+else
+  omarchy-hyprland-monitor-internal-disable
+fi

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -4,6 +4,9 @@
 MONITOR_INFO=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)')
 ACTIVE_MONITOR=$(echo "$MONITOR_INFO" | jq -r '.name')
 CURRENT_SCALE=$(echo "$MONITOR_INFO" | jq -r '.scale')
+WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
+HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
+REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
 
 # Cycle through scales: 1 → 1.6 → 2 → 3 → 1
 CURRENT_INT=$(awk -v s="$CURRENT_SCALE" 'BEGIN { printf "%.0f", s * 10 }')
@@ -15,7 +18,5 @@ case "$CURRENT_INT" in
 *) NEW_SCALE=1 ;;
 esac
 
-hyprctl keyword misc:disable_scale_notification true
-hyprctl keyword monitor "$ACTIVE_MONITOR,preferred,auto,$NEW_SCALE"
-hyprctl keyword misc:disable_scale_notification false
-notify-send "󰍹    Display scaling set to ${NEW_SCALE}x"
+hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
+notify-send -u low "󰍹    Display scaling set to ${NEW_SCALE}x"

bin/omarchy-hyprland-monitor-watch

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+# Listen on Hyprland's event socket and recover the internal display whenever
+# a monitor is removed.
+
+SOCKET="$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock"
+
+socat -U - "UNIX-CONNECT:$SOCKET" | while read -r event; do
+  case "$event" in
+    monitorremoved\>\>*|monitorremovedv2\>\>*)
+      omarchy-hyprland-monitor-internal-recover
+      ;;
+  esac
+done

bin/omarchy-hyprland-monitors-many

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Returns true when there are multiple monitors connected (so we can disable the internal one)
+
+(( $(hyprctl monitors -j 2>/dev/null | jq length) > 1 ))

bin/omarchy-hyprland-monitors-none

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Returns true when no monitors are connected
+
+(( $(hyprctl monitors -j 2>/dev/null | jq length) == 0 ))

bin/omarchy-hyprland-toggle

@@ -0,0 +1,31 @@
+#!/bin/bash
+
+# Toggle permanent Hyprland flags by copying them into a directory that's sourced entirely.
+
+ENABLED_NOTIFICATION=""
+DISABLED_NOTIFICATION=""
+
+while [[ $# -gt 1 ]]; do
+  case $1 in
+    --enabled-notification) ENABLED_NOTIFICATION="$2"; shift 2 ;;
+    --disabled-notification) DISABLED_NOTIFICATION="$2"; shift 2 ;;
+    *) break ;;
+  esac
+done
+
+FLAG_NAME="$1"
+FLAG="$HOME/.local/state/omarchy/toggles/hypr/$FLAG_NAME.conf"
+FLAG_SOURCE="$OMARCHY_PATH/default/hypr/toggles/$FLAG_NAME.conf"
+
+if [[ -f $FLAG ]]; then
+  rm $FLAG
+  [[ -n $DISABLED_NOTIFICATION ]] && notify-send -u low "$DISABLED_NOTIFICATION"
+elif [[ -f $FLAG_SOURCE ]]; then
+  cp $FLAG_SOURCE $FLAG
+  [[ -n $ENABLED_NOTIFICATION ]] && notify-send -u low "$ENABLED_NOTIFICATION"
+else
+  echo "Flag not found: $FLAG_NAME"
+  exit 1
+fi
+
+hyprctl reload

bin/omarchy-hyprland-toggle-disabled

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Check if a Hyprland toggle is currently disabled (missing).
+
+[[ ! -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-toggle-enabled

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Check if a Hyprland toggle is currently enabled.
+
+[[ -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-window-gaps-toggle

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Toggles the window gaps globally between no gaps and the default.
+
+omarchy-hyprland-toggle window-no-gaps

bin/omarchy-hyprland-window-single-square-aspect-toggle

@@ -1,13 +1,8 @@
 #!/bin/bash
 
-# Check current single_window_aspect_ratio setting
-CURRENT_VALUE=$(hyprctl getoption "dwindle:single_window_aspect_ratio" 2>/dev/null | head -1)
+# Toggle single-window square aspect ratio.
 
-# Parse vec2 output: "vec2: [1, 1]" or "vec2: [0, 0]"
-if [[ $CURRENT_VALUE == *"[1, 1]"* ]]; then
-  hyprctl keyword dwindle:single_window_aspect_ratio "0 0"
-  notify-send "    Disable single-window square aspect ratio"
-else
-  hyprctl keyword dwindle:single_window_aspect_ratio "1 1"
-  notify-send "    Enable single-window square aspect"
-fi
+omarchy-hyprland-toggle \
+  --enabled-notification "      Enable single-window square aspect ratio" \
+  --disabled-notification "      Disable single-window square aspect ratio" \
+  single-window-aspect-ratio

bin/omarchy-hyprland-workspace-layout-toggle

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+# Toggle the layout on the current active workspace between dwindle and scrolling
+
+ACTIVE_WORKSPACE=$(hyprctl activeworkspace -j | jq -r '.id')
+CURRENT_LAYOUT=$(hyprctl activeworkspace -j | jq -r '.tiledLayout')
+
+case "$CURRENT_LAYOUT" in
+  dwindle) NEW_LAYOUT=scrolling ;;
+  *) NEW_LAYOUT=dwindle ;;
+esac
+
+hyprctl keyword workspace $ACTIVE_WORKSPACE, layout:$NEW_LAYOUT
+notify-send -u low "󱂬    Workspace layout set to $NEW_LAYOUT"

bin/omarchy-hyprland-workspace-toggle-gaps

@@ -1,15 +0,0 @@
-#!/bin/bash
-
-# Toggles the window gaps globally between no gaps and the default 10/5/2.
-
-gaps=$(hyprctl getoption general:gaps_out -j | jq -r '.custom' | awk '{print $1}')
-
-if [[ $gaps == "0" ]]; then
-  hyprctl keyword general:gaps_out 10
-  hyprctl keyword general:gaps_in 5
-  hyprctl keyword general:border_size 2
-else
-  hyprctl keyword general:gaps_out 0
-  hyprctl keyword general:gaps_in 0
-  hyprctl keyword general:border_size 0
-fi

bin/omarchy-install-dev-env

@@ -50,9 +50,9 @@ case "$1" in
 ruby)
   echo -e "Installing Ruby on Rails...\n"
   omarchy-pkg-add libyaml
-  mise use --global ruby@latest
-  mise settings add idiomatic_version_file_enable_tools ruby
   mise settings add ruby.compile false
+  mise settings add idiomatic_version_file_enable_tools ruby
+  mise use --global ruby@latest
   echo "gem: --no-document" >~/.gemrc
   mise x ruby -- gem install rails --no-document
   echo -e "\nYou can now run: rails new myproject"

bin/omarchy-install-nordvpn

@@ -14,4 +14,4 @@ sudo usermod -aG nordvpn "$USER"
 echo -e "\nNordVPN installed! After reboot, run 'nordvpn login' to authenticate."
 
 echo
-gum confirm "Reboot now to make NordVPN usable?" && sudo reboot now
+gum confirm "Reboot now to make NordVPN usable?" && omarchy-system-reboot

bin/omarchy-install-once

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+# Install the ONCE service, enable its background service, and launch the TUI.
+
+echo "Installing ONCE..."
+omarchy-pkg-add once-bin
+
+echo "Enabling ONCE background service..."
+sudo systemctl enable --now once-background.service
+
+echo -e "\nLaunching ONCE..."
+once

bin/omarchy-launch-or-focus

@@ -10,7 +10,7 @@ fi
 
 WINDOW_PATTERN="$1"
 LAUNCH_COMMAND="${2:-"uwsm-app -- $WINDOW_PATTERN"}"
-WINDOW_ADDRESS=$(hyprctl clients -j | jq -r --arg p "$WINDOW_PATTERN" '.[]|select((.class|test("\\b" + p + "\\b";"i")) or (.title|test("\\b" + $p + "\\b";"i")))|.address' | head -n1)
+WINDOW_ADDRESS=$(hyprctl clients -j | jq -r --arg p "$WINDOW_PATTERN" '.[]|select((.class|test("\\b" + $p + "\\b";"i")) or (.title|test("\\b" + $p + "\\b";"i")))|.address' | head -n1)
 
 if [[ -n $WINDOW_ADDRESS ]]; then
   hyprctl dispatch focuswindow "address:$WINDOW_ADDRESS"

bin/omarchy-launch-screensaver

@@ -11,14 +11,14 @@ fi
 pgrep -f org.omarchy.screensaver && exit 0
 
 # Allow screensaver to be turned off but also force started
-if [[ -f ~/.local/state/omarchy/toggles/screensaver-off ]] && [[ $1 != "force" ]]; then
+if omarchy-toggle-enabled screensaver-off && [[ $1 != "force" ]]; then
   exit 1
 fi
 
 # Silently quit Walker on overlay
 walker -q
 
-focused=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')
+focused=$(omarchy-hyprland-monitor-focused)
 terminal=$(xdg-terminal-exec --print-id)
 
 for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
@@ -46,7 +46,7 @@ for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
       -e omarchy-cmd-screensaver
     ;;
   *)
-    notify-send "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
+    notify-send -u low "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
     ;;
   esac
 done

bin/omarchy-launch-walker

@@ -9,7 +9,7 @@ fi
 
 # Ensure walker service is running
 if ! pgrep -f "walker --gapplication-service" > /dev/null; then
-  setsid uwsm-app -- walker --gapplication-service &
+  setsid uwsm-app -- env GSK_RENDERER=cairo walker --gapplication-service &
 fi
 
 exec walker --width 644 --maxheight 300 --minheight 300 "$@"

bin/omarchy-launch-webapp

@@ -5,7 +5,7 @@
 browser=$(xdg-settings get default-web-browser)
 
 case $browser in
-google-chrome* | brave-browser* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
+google-chrome* | brave* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
 *) browser="chromium.desktop" ;;
 esac
 

bin/omarchy-menu

@@ -19,6 +19,13 @@ back_to() {
   fi
 }
 
+toggle_existing_menu() {
+  if pgrep -f "walker.*--dmenu" >/dev/null; then
+    walker --close >/dev/null 2>&1
+    exit 0
+  fi
+}
+
 menu() {
   local prompt="$1"
   local options="$2"
@@ -47,7 +54,7 @@ present_terminal() {
 }
 
 open_in_editor() {
-  notify-send "Editing config file" "$1"
+  notify-send -u low "Editing config file" "$1"
   omarchy-launch-editor "$1"
 }
 
@@ -102,7 +109,7 @@ show_capture_menu() {
   *Screenshot*) omarchy-cmd-screenshot ;;
   *Screenrecord*) show_screenrecord_menu ;;
   *Color*) pkill hyprpicker || hyprpicker -a ;;
-  *) show_trigger_menu ;;
+  *) back_to show_trigger_menu ;;
   esac
 }
 
@@ -161,12 +168,18 @@ show_share_menu() {
 }
 
 show_toggle_menu() {
-  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar") in
+  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Monitor Scaling\n󰛧  Laptop Display") in
+
   *Screensaver*) omarchy-toggle-screensaver ;;
   *Nightlight*) omarchy-toggle-nightlight ;;
   *Idle*) omarchy-toggle-idle ;;
   *Bar*) omarchy-toggle-waybar ;;
-  *) show_trigger_menu ;;
+  *Layout*) omarchy-hyprland-workspace-layout-toggle ;;
+  *Ratio*) omarchy-hyprland-window-single-square-aspect-toggle ;;
+  *Gaps*) omarchy-hyprland-window-gaps-toggle ;;
+  *Scaling*) omarchy-hyprland-monitor-scaling-cycle ;;
+  *Laptop*) omarchy-hyprland-monitor-internal-toggle ;;
+  *) back_to show_trigger_menu ;;
   esac
 }
 
@@ -264,7 +277,7 @@ show_setup_config_menu() {
 show_setup_system_menu() {
   local options=""
 
-  if [[ -f ~/.local/state/omarchy/toggles/suspend-off ]]; then
+  if omarchy-toggle-enabled suspend-off; then
     options="$options󰒲  Enable Suspend"
   else
     options="$options󰒲  Disable Suspend"
@@ -303,10 +316,11 @@ show_install_menu() {
 }
 
 show_install_service_menu() {
-  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN\n󰟵  Bitwarden\n  Chromium Account") in
+  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN [AUR]\n󰏖  ONCE\n󰟵  Bitwarden\n  Chromium Account") in
   *Dropbox*) present_terminal omarchy-install-dropbox ;;
   *Tailscale*) present_terminal omarchy-install-tailscale ;;
   *NordVPN*) present_terminal omarchy-install-nordvpn ;;
+  *ONCE*) present_terminal omarchy-install-once ;;
   *Bitwarden*) install_and_launch "Bitwarden" "bitwarden bitwarden-cli" "bitwarden" ;;
   *Chromium*) present_terminal omarchy-install-chromium-google-account ;;
   *) show_install_menu ;;
@@ -341,14 +355,9 @@ show_install_ai_menu() {
       echo ollama
   )
 
-  case $(menu "Install" "  Dictation\n󱚤  Claude Code\n󱚤  Codex\n󱚤  Gemini CLI\n󱚤  Copilot CLI\n󱚤  Cursor CLI\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
+  case $(menu "Install" "  Dictation\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
   *Dictation*) present_terminal omarchy-voxtype-install ;;
-  *Claude*) install "Claude Code" "claude-code" ;;
-  *Codex*) install "Codex" "openai-codex" ;;
-  *Gemini*) install "Gemini CLI" "gemini-cli" ;;
-  *Copilot*) install "Copilot CLI" "github-copilot-cli" ;;
-  *Cursor*) install "Cursor CLI" "cursor-cli" ;;
-  *Studio*) install "LM Studio" "lmstudio" ;;
+  *Studio*) install "LM Studio" "lmstudio-bin" ;;
   *Ollama*) install "Ollama" $ollama_pkg ;;
   *Crush*) install "Crush" "crush-bin" ;;
   *) show_install_menu ;;
@@ -520,9 +529,10 @@ show_update_channel_menu() {
   esac
 }
 show_update_process_menu() {
-  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
+  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n󰎟  Mako\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
   *Hypridle*) omarchy-restart-hypridle ;;
   *Hyprsunset*) omarchy-restart-hyprsunset ;;
+  *Mako*) omarchy-restart-mako ;;
   *Swayosd*) omarchy-restart-swayosd ;;
   *Walker*) omarchy-restart-walker ;;
   *Waybar*) omarchy-restart-waybar ;;
@@ -546,10 +556,11 @@ show_update_config_menu() {
 }
 
 show_update_hardware_menu() {
-  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth") in
+  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth\n󰟸  Trackpad") in
   *Audio*) present_terminal omarchy-restart-pipewire ;;
   *Wi-Fi*) present_terminal omarchy-restart-wifi ;;
   *Bluetooth*) present_terminal omarchy-restart-bluetooth ;;
+  *Trackpad*) present_terminal omarchy-restart-trackpad ;;
   *) show_update_menu ;;
   esac
 }
@@ -568,7 +579,7 @@ show_about() {
 
 show_system_menu() {
   local options="󱄄  Screensaver\n  Lock"
-  [[ ! -f ~/.local/state/omarchy/toggles/suspend-off ]] && options="$options\n󰒲  Suspend"
+  ! omarchy-toggle-enabled suspend-off && options="$options\n󰒲  Suspend"
   omarchy-hibernation-available && options="$options\n󰤁  Hibernate"
   options="$options\n󰍃  Logout\n󰜉  Restart\n󰐥  Shutdown"
 
@@ -593,6 +604,7 @@ go_to_menu() {
   *apps*) walker -p "Launch…" ;;
   *learn*) show_learn_menu ;;
   *trigger*) show_trigger_menu ;;
+  *toggle*) show_toggle_menu ;;
   *share*) show_share_menu ;;
   *background*) show_background_menu ;;
   *capture*) show_capture_menu ;;
@@ -613,6 +625,8 @@ go_to_menu() {
 USER_EXTENSIONS="$HOME/.config/omarchy/extensions/menu.sh"
 [[ -f $USER_EXTENSIONS ]] && source "$USER_EXTENSIONS"
 
+toggle_existing_menu
+
 if [[ -n $1 ]]; then
   BACK_TO_EXIT=true
   go_to_menu "$1"

bin/omarchy-menu-keybindings

@@ -46,8 +46,12 @@ parse_keycodes() {
   while IFS= read -r line; do
     if [[ $line =~ code:([0-9]+) ]]; then
       code="${BASH_REMATCH[1]}"
-      symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
-      echo "${line/code:${code}/$symbol}"
+      if [[ $code == "201" ]]; then
+        echo "${line/SUPER SHIFT,code:201/,COPILOT KEY}"
+      else
+        symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
+        echo "${line/code:${code}/$symbol}"
+      fi
     elif [[ $line =~ mouse:([0-9]+) ]]; then
       code="${BASH_REMATCH[1]}"
 

bin/omarchy-npx-install

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+# Install an npx wrapper for a given npm package.
+# Usage: omarchy-npx-install <package> [command-name]
+#
+# If command-name is omitted, it defaults to the package name.
+# Example: omarchy-npx-install opencode-ai opencode
+
+if [[ -z $1 ]]; then
+  echo "Usage: omarchy-npx-install <package> [command-name]"
+  exit 1
+fi
+
+package=$1
+command=${2:-$1}
+
+mkdir -p "$HOME/.local/bin"
+
+cat > "$HOME/.local/bin/$command" <<EOF
+#!/bin/bash
+exec mise exec node@latest -- npx --yes $package "\$@"
+EOF
+
+chmod +x "$HOME/.local/bin/$command"

bin/omarchy-pkg-aur-install

@@ -20,7 +20,8 @@ pkg_names=$(yay -Slqa | fzf "${fzf_args[@]}")
 
 if [[ -n $pkg_names ]]; then
   # Add aur/ prefix to each package name and convert to space-separated for yay
-  sudo -v
+  source omarchy-sudo-keepalive
+
   echo "$pkg_names" | sed 's/^/aur\//' | tr '\n' ' ' | xargs yay -S --noconfirm
   sudo updatedb
   omarchy-show-done

bin/omarchy-pkg-install

@@ -17,7 +17,9 @@ fzf_args=(
 pkg_names=$(pacman -Slq | fzf "${fzf_args[@]}")
 
 if [[ -n $pkg_names ]]; then
-  # Convert newline-separated selections to space-separated for yay
+  source omarchy-sudo-keepalive
+
+  # Convert newline-separated selections to space-separated for pacman
   echo "$pkg_names" | tr '\n' ' ' | xargs sudo pacman -S --noconfirm
   omarchy-show-done
 fi

bin/omarchy-powerprofiles-init

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+# Set the correct power profile on boot based on current AC/battery state.
+# The udev rules only fire on state *changes*, so without this, booting
+# on AC leaves you in the default balanced mode.
+
+if omarchy-battery-present && ! omarchy-ac-present; then
+  omarchy-powerprofiles-set battery
+else
+  omarchy-powerprofiles-set ac
+fi

bin/omarchy-powerprofiles-set

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Set the power profile to the requested level, falling back to balanced
+# if the requested profile isn't available on this machine.
+#
+# Usage: omarchy-powerprofiles-set <ac|battery>
+
+mapfile -t profiles < <(powerprofilesctl list | awk '/^\s*[* ]\s*[a-zA-Z0-9\-]+:$/ { gsub(/^[*[:space:]]+|:$/,""); print }')
+
+case "$1" in
+  ac)
+    # Prefer performance, fall back to balanced
+    if [[ " ${profiles[*]} " == *" performance "* ]]; then
+      powerprofilesctl set performance
+    else
+      powerprofilesctl set balanced
+    fi
+    ;;
+  battery)
+    powerprofilesctl set balanced
+    ;;
+esac

bin/omarchy-refresh-tmux

@@ -3,7 +3,4 @@
 # Overwrite the user tmux config with the Omarchy default and reload tmux.
 
 omarchy-refresh-config tmux/tmux.conf
-
-if pgrep -x tmux; then
-  tmux source-file ~/.config/tmux/tmux.conf
-fi
+omarchy-restart-tmux

bin/omarchy-reinstall-git

@@ -3,6 +3,6 @@ set -e
 
 # Reinstall the Omarchy configuration directory from the git source.
 
-git clone "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
+git clone --depth=1 "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
 mv $OMARCHY_PATH ~/.local/share/omarchy-old
 mv ~/.local/share/omarchy-new $OMARCHY_PATH

bin/omarchy-remove-preinstalls

@@ -13,6 +13,10 @@ if gum confirm "Are you sure you want to remove all preinstalled web apps, TUI w
   cp "$OMARCHY_PATH/default/hypr/plain-bindings.conf" ~/.config/hypr/bindings.conf
   hyprctl reload
 
+  # Remove npx stubs
+  rm -f ~/.local/bin/codex ~/.local/bin/gemini ~/.local/bin/copilot \
+       ~/.local/bin/opencode ~/.local/bin/playwright-cli ~/.local/bin/pi
+
   omarchy-pkg-drop \
     aether \
     typora \

bin/omarchy-restart-tmux

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Restart tmux if running with the latest configuration
+
+if pgrep -x tmux; then
+  tmux source-file ~/.config/tmux/tmux.conf
+fi

bin/omarchy-restart-trackpad

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+# Reset the trackpad by unbinding and rebinding its driver.
+# Covers both driver paths:
+#   - i2c_hid_acpi (DesignWare I2C, e.g. XPS 14/16 Synaptics trackpad)
+#   - intel_quicki2c (THC Touch Host Controller)
+
+# Try i2c_hid_acpi path (DesignWare I2C trackpads)
+for dev in /sys/bus/i2c/drivers/i2c_hid_acpi/i2c-*; do
+  [ -e "$dev" ] || continue
+  I2C_DEVICE=$(basename "$dev")
+  echo "Resetting $I2C_DEVICE via i2c_hid_acpi unbind/rebind..."
+  echo "$I2C_DEVICE" | sudo tee /sys/bus/i2c/drivers/i2c_hid_acpi/unbind > /dev/null
+  sleep 1
+  echo "$I2C_DEVICE" | sudo tee /sys/bus/i2c/drivers/i2c_hid_acpi/bind > /dev/null
+  echo "Done"
+done
+
+# Also try THC path
+if lsmod | grep -q intel_quicki2c; then
+  echo "Reloading intel_quicki2c..."
+  sudo modprobe -r intel_quicki2c && sudo modprobe intel_quicki2c
+fi

bin/omarchy-sudo-keepalive

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# Prompt for sudo once and keep the credential alive in the background.
+# Source this script so the trap applies to the calling shell:
+#   source omarchy-sudo-keepalive
+
+sudo -v
+while true; do sudo -n true; sleep 60; done 2>/dev/null &
+SUDO_KEEPALIVE_PID=$!
+trap "kill $SUDO_KEEPALIVE_PID 2>/dev/null" EXIT

bin/omarchy-sudo-passwordless-toggle

@@ -0,0 +1,43 @@
+#!/bin/bash
+
+# Toggle passwordless sudo for the current user.
+# First run: enables passwordless sudo for 15 minutes (after confirmation).
+# Second run: disables it early.
+
+NOPASSWD_FILE="/etc/sudoers.d/99-omarchy-nopasswd-${USER}"
+TIMER_NAME="omarchy-nopasswd-expire-${USER}"
+
+# Safety: if the file exists but the timer doesn't (e.g. after reboot), clean up
+if sudo test -f "$NOPASSWD_FILE" && ! systemctl is-active "${TIMER_NAME}.timer" &>/dev/null; then
+  sudo rm "$NOPASSWD_FILE"
+fi
+
+# Check for the file directly — sudo -n can stay cached or be granted by other rules
+if sudo test -f "$NOPASSWD_FILE"; then
+  sudo rm "$NOPASSWD_FILE"
+  sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
+  echo "Passwordless sudo has been DISABLED. Sudo will require a password again."
+else
+  echo ""
+  echo "⚠️  WARNING: This will allow ANY process running as your user to"
+  echo "execute ANY command as root WITHOUT a password for 15 minutes."
+  echo ""
+  echo "This is useful for AI agents that need to run sudo commands,"
+  echo "but it significantly weakens the security of your system."
+  echo "Anyone or anything with access to your user account gets full root."
+  echo ""
+  echo "Passwordless sudo will automatically disable after 15 minutes."
+  echo "Run this command again to disable it early."
+  echo ""
+
+  if gum confirm "Enable passwordless sudo for 15 minutes? This is a significant security risk!"; then
+    echo "${USER} ALL=(ALL) NOPASSWD: ALL" | sudo tee "$NOPASSWD_FILE" > /dev/null
+    sudo chmod 440 "$NOPASSWD_FILE"
+    sudo systemd-run --on-active=15m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
+      rm "$NOPASSWD_FILE"
+    echo "Passwordless sudo has been ENABLED. It will automatically disable in 15 minutes."
+    echo "Note: if you restart before then, run omarchy-sudo-passwordless-toggle again to disable it."
+  else
+    echo "Aborted. No changes made."
+  fi
+fi

bin/omarchy-swayosd-brightness

@@ -9,7 +9,7 @@ progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"
 
 swayosd-client \
-  --monitor "$(hyprctl monitors -j | jq -r '.[]|select(.focused==true).name')" \
+  --monitor "$(omarchy-hyprland-monitor-focused)" \
   --custom-icon display-brightness \
   --custom-progress "$progress" \
   --custom-progress-text "${percent}%"

bin/omarchy-swayosd-kbd-brightness

@@ -9,7 +9,7 @@ progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"
 
 swayosd-client \
-  --monitor "$(hyprctl monitors -j | jq -r '.[]|select(.focused==true).name')" \
+  --monitor "$(omarchy-hyprland-monitor-focused)" \
   --custom-icon keyboard-brightness \
   --custom-progress "$progress" \
   --custom-progress-text "${percent}%"

bin/omarchy-theme-set-browser

@@ -13,12 +13,12 @@ if omarchy-cmd-present chromium || omarchy-cmd-present brave; then
   fi
 
   if omarchy-cmd-present chromium; then
-    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
-    chromium --refresh-platform-policy --no-startup-window >/dev/null
+    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
+    chromium --refresh-platform-policy --no-startup-window &>/dev/null
   fi
 
   if omarchy-cmd-present brave; then
-    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
-    brave --refresh-platform-policy --no-startup-window >/dev/null
+    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
+    brave --refresh-platform-policy --no-startup-window &>/dev/null
   fi
 fi

bin/omarchy-theme-set-vscode

@@ -7,9 +7,8 @@ VS_CODE_THEME="$HOME/.config/omarchy/current/theme/vscode.json"
 set_theme() {
   local editor_cmd="$1"
   local settings_path="$2"
-  local skip_flag="$3"
 
-  omarchy-cmd-present "$editor_cmd" && [[ ! -f $skip_flag ]] || return 0
+  omarchy-cmd-present "$editor_cmd" || return 0
 
   if [[ -f $VS_CODE_THEME ]]; then
     theme_name=$(jq -r '.name' "$VS_CODE_THEME")
@@ -34,6 +33,7 @@ set_theme() {
   fi
 }
 
-set_theme "code" "$HOME/.config/Code/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-vscode-theme-changes"
-set_theme "codium" "$HOME/.config/VSCodium/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-codium-theme-changes"
-set_theme "cursor" "$HOME/.config/Cursor/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-cursor-theme-changes"
+! omarchy-toggle-enabled skip-vscode-theme-changes && set_theme "code" "$HOME/.config/Code/User/settings.json"
+! omarchy-toggle-enabled skip-vscode-insiders-theme-changes && set_theme "code-insiders" "$HOME/.config/Code - Insiders/User/settings.json"
+! omarchy-toggle-enabled skip-codium-theme-changes && set_theme "codium" "$HOME/.config/VSCodium/User/settings.json"
+! omarchy-toggle-enabled skip-cursor-theme-changes && set_theme "cursor" "$HOME/.config/Cursor/User/settings.json"

bin/omarchy-toggle

@@ -0,0 +1,26 @@
+#!/bin/bash
+
+# Toggle Omarchy features between enabled and disabled
+
+ENABLED_NOTIFICATION=""
+DISABLED_NOTIFICATION=""
+
+while [[ $# -gt 1 ]]; do
+  case $1 in
+    --enabled-notification) ENABLED_NOTIFICATION="$2"; shift 2 ;;
+    --disabled-notification) DISABLED_NOTIFICATION="$2"; shift 2 ;;
+    *) break ;;
+  esac
+done
+
+FLAG_NAME="$1"
+FLAG="$HOME/.local/state/omarchy/toggles/$FLAG_NAME"
+
+if [[ -f $FLAG ]]; then
+  rm $FLAG
+  [[ -n $DISABLED_NOTIFICATION ]] && notify-send -u low "$DISABLED_NOTIFICATION"
+else
+  mkdir -p "$(dirname $FLAG)"
+  touch $FLAG
+  [[ -n $ENABLED_NOTIFICATION ]] && notify-send -u low "$ENABLED_NOTIFICATION"
+fi

bin/omarchy-toggle-enabled

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+# Check if a toggle is enabled (flag file exists)
+[[ -f "$HOME/.local/state/omarchy/toggles/$1" ]]

bin/omarchy-toggle-idle

@@ -2,10 +2,10 @@
 
 if pgrep -x hypridle >/dev/null; then
   pkill -x hypridle
-  notify-send "󱫖    Stop locking computer when idle"
+  notify-send -u low "󱫖    Stop locking computer when idle"
 else
   uwsm-app -- hypridle >/dev/null 2>&1 &
-  notify-send "󱫖    Now locking computer when idle"
+  notify-send -u low "󱫖    Now locking computer when idle"
 fi
 
 pkill -RTMIN+9 waybar

bin/omarchy-toggle-nightlight

@@ -21,10 +21,10 @@ restart_nightlighted_waybar() {
 
 if [[ $CURRENT_TEMP == $OFF_TEMP ]]; then
   hyprctl hyprsunset temperature $ON_TEMP
-  notify-send "  Nightlight screen temperature"
+  notify-send -u low "  Nightlight screen temperature"
   restart_nightlighted_waybar
 else
   hyprctl hyprsunset temperature $OFF_TEMP
-  notify-send "   Daylight screen temperature"
+  notify-send -u low "   Daylight screen temperature"
   restart_nightlighted_waybar
 fi

bin/omarchy-toggle-notification-silencing

@@ -3,9 +3,9 @@
 makoctl mode -t do-not-disturb
 
 if makoctl mode | grep -q 'do-not-disturb'; then
-  notify-send "󰂛    Silenced notifications"
+  notify-send -u low "󰂛    Silenced notifications"
 else
-  notify-send "󰂚    Enabled notifications"
+  notify-send -u low "󰂚    Enabled notifications"
 fi
 
 pkill -RTMIN+10 waybar

bin/omarchy-toggle-screensaver

@@ -1,12 +1,6 @@
 #!/bin/bash
 
-STATE_FILE=~/.local/state/omarchy/toggles/screensaver-off
-
-if [[ -f $STATE_FILE ]]; then
-  rm -f $STATE_FILE
-  notify-send "󱄄   Screensaver enabled"
-else
-  mkdir -p "$(dirname $STATE_FILE)"
-  touch $STATE_FILE
-  notify-send "󱄄   Screensaver disabled"
-fi
+omarchy-toggle \
+  --enabled-notification "󱄄   Screensaver disabled" \
+  --disabled-notification "󱄄   Screensaver enabled" \
+  screensaver-off

bin/omarchy-toggle-suspend

@@ -1,12 +1,6 @@
 #!/bin/bash
 
-STATE_FILE=~/.local/state/omarchy/toggles/suspend-off
-
-if [[ -f $STATE_FILE ]]; then
-  rm -f $STATE_FILE
-  notify-send "󰒲   Suspend now available in system menu"
-else
-  mkdir -p "$(dirname $STATE_FILE)"
-  touch $STATE_FILE
-  notify-send "󰒲   Suspend removed from system menu"
-fi
+omarchy-toggle \
+  --enabled-notification "󰒲   Suspend removed from system menu" \
+  --disabled-notification "󰒲   Suspend now available in system menu" \
+  suspend-off

bin/omarchy-toggle-waybar

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+omarchy-toggle waybar-off
+
 if pgrep -x waybar >/dev/null; then
   pkill -x waybar
 else

bin/omarchy-update

@@ -2,10 +2,17 @@
 
 set -e
 
+# Run the update inside a PTY so pacman/yay keep showing download progress
+# while still logging the full session for later analysis.
+if [[ -z $OMARCHY_UPDATE_LOGGED ]]; then
+  script_command=$(printf '%q ' "$0" "$@")
+  exec env OMARCHY_UPDATE_LOGGED=1 script -qefc "$script_command" "/tmp/omarchy-update.log"
+fi
+
 trap 'echo ""; echo -e "\033[0;31mSomething went wrong during the update!\n\nPlease review the output above carefully, correct the error, and retry the update.\n\nIf you need assistance, get help from the community at https://omarchy.org/discord\033[0m"' ERR
 
 if [[ $1 == "-y" ]] || omarchy-update-confirm; then
-  omarchy-snapshot create || (( $? == 127 ))
+  omarchy-snapshot create || (($? == 127))
   omarchy-update-git
   omarchy-update-perform
 fi

bin/omarchy-update-firmware

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Update system firmware using fwupd. Ensures the fwupd EFI binary is installed
+# in the ESP so UEFI capsule updates work with the Limine bootloader.
+
 set -e
 echo -e "\e[32mUpdate Firmware\e[0m"
 
@@ -7,5 +10,9 @@ if omarchy-cmd-missing fwupdmgr; then
   omarchy-pkg-add fwupd
 fi
 
+if [[ -d /sys/firmware/efi ]] && [[ -f /usr/lib/fwupd/efi/fwupdx64.efi ]]; then
+  sudo install -D /usr/lib/fwupd/efi/fwupdx64.efi /boot/EFI/arch/fwupdx64.efi
+fi
+
 fwupdmgr refresh --force
 sudo fwupdmgr update

bin/omarchy-update-git

@@ -4,5 +4,12 @@ set -e
 
 echo -e "\e[32mUpdate Omarchy\e[0m"
 
+omarchy-update-time
+
+# Suppress Hyprland config errors while git updates default config files mid-pull
+hyprctl keyword debug:suppress_errors true &>/dev/null || true
+
 git -C $OMARCHY_PATH pull --autostash
 git -C $OMARCHY_PATH --no-pager diff --check || git -C $OMARCHY_PATH reset --merge
+
+hyprctl reload &>/dev/null || true

bin/omarchy-update-perform

@@ -3,13 +3,9 @@
 set -e
 
 # Ensure screensaver/sleep doesn't set in during updates
-hyprctl dispatch tagwindow +noidle &> /dev/null || true
-
-# Capture update logs
-exec > >(tee "/tmp/omarchy-update.log") 2>&1
+hyprctl dispatch tagwindow +noidle &>/dev/null || true
 
 # Perform all update steps
-omarchy-update-time
 omarchy-update-keyring
 omarchy-update-available-reset
 omarchy-update-system-pkgs
@@ -23,4 +19,4 @@ omarchy-update-analyze-logs
 omarchy-update-restart
 
 # Re-enable screensaver/sleep after updates
-hyprctl dispatch tagwindow -- -noidle &> /dev/null || true
+hyprctl dispatch tagwindow -- -noidle &>/dev/null || true

bin/omarchy-update-restart

@@ -1,11 +1,18 @@
 #!/bin/bash
 
+echo
+
 if [[ ! -d /usr/lib/modules/$(uname -r) ]]; then
   gum confirm "Linux kernel has been updated. Reboot?" && omarchy-system-reboot
 elif [[ -f $HOME/.local/state/omarchy/reboot-required ]]; then
   gum confirm "Updates require reboot. Ready?" && omarchy-system-reboot
 fi
 
+running_hyprland=$(readlink /proc/$(pgrep -x Hyprland)/exe 2>/dev/null)
+if [[ $running_hyprland == *"(deleted)"* ]]; then
+  gum confirm "Hyprland has been updated. Reboot?" && omarchy-system-reboot
+fi
+
 for file in "$HOME"/.local/state/omarchy/restart-*-required; do
   if [[ -f $file ]]; then
     filename=$(basename "$file")

bin/omarchy-voxtype-install

@@ -11,6 +11,9 @@ if gum confirm "Install Voxtype + AI model (~150MB) to enable dictation?"; then
   cp $OMARCHY_PATH/default/voxtype/config.toml ~/.config/voxtype/
 
   voxtype setup --download --no-post-install
+  if omarchy-hw-vulkan; then
+    voxtype setup gpu --enable || true
+  fi
   voxtype setup systemd
 
   omarchy-restart-waybar

config/Typora/themes/ia_typora_night.css

@@ -8,7 +8,7 @@
   --light-header-color: #dbdbdb; /* H1-H3 */
   --select-text-bg-color: #186a9a;
   --accent-color: #4f525a;
-  --background-color: #101010;
+  --background-color: #000000;
   --font-color: #bbbcbc;
   --header-color: #bebebe; /* H4-H6 */
   --border-color: #232629;

config/alacritty/alacritty.toml

@@ -20,5 +20,6 @@ decorations = "None"
 [keyboard]
 bindings = [
 { key = "Insert", mods = "Shift", action = "Paste" },
-{ key = "Insert", mods = "Control", action = "Copy" }
+{ key = "Insert", mods = "Control", action = "Copy" },
+{ key = "Return", mods = "Shift", chars = "\u001B\r" }
 ]

config/autostart/org.fcitx.Fcitx5.desktop

@@ -0,0 +1,2 @@
+[Desktop Entry]
+Hidden=true

config/btop/btop.conf

@@ -1,18 +1,18 @@
-#? Config file for btop
+#? Config file for btop v.1.4.6
 
 #* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
 #* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
 color_theme = "current"
 
 #* If the theme set background should be shown, set to False if you want terminal background transparency.
-theme_background = True
+theme_background = true
 
 #* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
-truecolor = True
+truecolor = true
 
 #* Set to true to force tty mode regardless if a real tty has been detected or not.
 #* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
-force_tty = False
+force_tty = false
 
 #* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
 #* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
@@ -22,10 +22,13 @@ presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:defaul
 
 #* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
 #* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
-vim_keys = True
+vim_keys = true
 
 #* Rounded corners on boxes, is ignored if TTY mode is ON.
-rounded_corners = True
+rounded_corners = true
+
+#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
+terminal_sync = true
 
 #* Default symbols to use for graph creation, "braille", "block" or "tty".
 #* "braille" offers the highest resolution but might not be included in all fonts.
@@ -60,37 +63,40 @@ update_ms = 2000
 proc_sorting = "cpu lazy"
 
 #* Reverse sorting order, True or False.
-proc_reversed = False
+proc_reversed = false
 
 #* Show processes as a tree.
-proc_tree = False
+proc_tree = false
 
 #* Use the cpu graph colors in the process list.
-proc_colors = True
+proc_colors = true
 
 #* Use a darkening gradient in the process list.
-proc_gradient = True
+proc_gradient = true
 
 #* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
-proc_per_core = False
+proc_per_core = false
 
 #* Show process memory as bytes instead of percent.
-proc_mem_bytes = True
+proc_mem_bytes = true
 
 #* Show cpu graph for each process.
-proc_cpu_graphs = True
+proc_cpu_graphs = true
 
 #* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
-proc_info_smaps = False
+proc_info_smaps = false
 
 #* Show proc box on left side of screen instead of right.
-proc_left = False
+proc_left = false
 
 #* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
-proc_filter_kernel = False
+proc_filter_kernel = false
 
 #* In tree-view, always accumulate child process resources in the parent process.
-proc_aggregate = False
+proc_aggregate = false
+
+#* Should cpu and memory usage display be preserved for dead processes when paused.
+keep_dead_proc_usage = false
 
 #* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
 #* Select from a list of detected attributes from the options menu.
@@ -104,25 +110,28 @@ cpu_graph_lower = "Auto"
 show_gpu_info = "Auto"
 
 #* Toggles if the lower CPU graph should be inverted.
-cpu_invert_lower = True
+cpu_invert_lower = true
 
 #* Set to True to completely disable the lower CPU graph.
-cpu_single_graph = False
+cpu_single_graph = false
 
 #* Show cpu box at bottom of screen instead of top.
-cpu_bottom = False
+cpu_bottom = false
 
 #* Shows the system uptime in the CPU box.
-show_uptime = True
+show_uptime = true
+
+#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
+show_cpu_watts = true
 
 #* Show cpu temperature.
-check_temp = True
+check_temp = true
 
 #* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
 cpu_sensor = "Auto"
 
 #* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
-show_coretemp = True
+show_coretemp = true
 
 #* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
 #* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
@@ -134,63 +143,66 @@ cpu_core_map = ""
 temp_scale = "celsius"
 
 #* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
-base_10_sizes = False
+base_10_sizes = false
 
 #* Show CPU frequency.
-show_cpu_freq = True
+show_cpu_freq = true
+
+#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
+freq_mode = "first"
 
 #* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
 #* Special formatting: /host = hostname | /user = username | /uptime = system uptime
 clock_format = "%X"
 
 #* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
-background_update = True
+background_update = true
 
 #* Custom cpu model name, empty string to disable.
 custom_cpu_name = ""
 
 #* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
-#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
+#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
 disks_filter = ""
 
 #* Show graphs instead of meters for memory values.
-mem_graphs = True
+mem_graphs = true
 
 #* Show mem box below net box instead of above.
-mem_below_net = False
+mem_below_net = false
 
 #* Count ZFS ARC in cached and available memory.
-zfs_arc_cached = True
+zfs_arc_cached = true
 
 #* If swap memory should be shown in memory box.
-show_swap = True
+show_swap = true
 
 #* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
-swap_disk = True
+swap_disk = true
 
 #* If mem box should be split to also show disks info.
-show_disks = True
+show_disks = true
 
 #* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
-only_physical = True
+only_physical = true
 
 #* Read disks list from /etc/fstab. This also disables only_physical.
-use_fstab = True
+use_fstab = true
 
 #* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
-zfs_hide_datasets = False
+zfs_hide_datasets = false
 
 #* Set to true to show available disk space for privileged users.
-disk_free_priv = False
+disk_free_priv = false
 
 #* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
-show_io_stat = True
+show_io_stat = true
 
 #* Toggles io mode for disks, showing big graphs for disk read/write speeds.
-io_mode = False
+io_mode = false
 
 #* Set to True to show combined read/write io graphs in io mode.
-io_graph_combined = False
+io_graph_combined = false
 
 #* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
 #* Example: "/mnt/media:100 /:20 /boot:1".
@@ -202,29 +214,44 @@ net_download = 100
 net_upload = 100
 
 #* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
-net_auto = True
+net_auto = true
 
 #* Sync the auto scaling for download and upload to whichever currently has the highest scale.
-net_sync = True
+net_sync = true
 
 #* Starts with the Network Interface specified here.
 net_iface = ""
 
+#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
+base_10_bitrate = "Auto"
+
 #* Show battery stats in top right if battery is present.
-show_battery = True
+show_battery = true
 
 #* Which battery to use if multiple are present. "Auto" for auto detection.
 selected_battery = "Auto"
 
-#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = true
+
+#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
 #* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
 log_level = "WARNING"
 
+#* Automatically save current settings to config file on exit.
+save_config_on_exit = true
+
 #* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
-nvml_measure_pcie_speeds = True
+nvml_measure_pcie_speeds = true
+
+#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
+rsmi_measure_pcie_speeds = true
 
 #* Horizontally mirror the GPU graph.
-gpu_mirror_graph = True
+gpu_mirror_graph = true
+
+#* Set which GPU vendors to show. Available values are "nvidia amd intel"
+shown_gpus = "nvidia amd intel"
 
 #* Custom gpu0 model name, empty string to disable.
 custom_gpu_name0 = ""
@@ -243,4 +270,3 @@ custom_gpu_name4 = ""
 
 #* Custom gpu5 model name, empty string to disable.
 custom_gpu_name5 = ""
-

config/hypr/bindings.conf

@@ -1,6 +1,7 @@
 # Application bindings
 bindd = SUPER, RETURN, Terminal, exec, uwsm-app -- xdg-terminal-exec --dir="$(omarchy-cmd-terminal-cwd)"
-bindd = SUPER ALT, RETURN, Tmux, exec, uwsm-app -- xdg-terminal-exec --dir="$(omarchy-cmd-terminal-cwd)" tmux new
+bindd = SUPER ALT, RETURN, Tmux, exec, uwsm-app -- xdg-terminal-exec --dir="$(omarchy-cmd-terminal-cwd)" bash -c "tmux attach || tmux new -s Work"
+bindd = SUPER SHIFT, RETURN, Browser, exec, omarchy-launch-browser
 bindd = SUPER SHIFT, F, File manager, exec, uwsm-app -- nautilus --new-window
 bindd = SUPER ALT SHIFT, F, File manager (cwd), exec, uwsm-app -- nautilus --new-window "$(omarchy-cmd-terminal-cwd)"
 bindd = SUPER SHIFT, B, Browser, exec, omarchy-launch-browser
@@ -31,3 +32,8 @@ bindd = SUPER SHIFT ALT, X, X Post, exec, omarchy-launch-webapp "https://x.com/c
 # Overwrite existing bindings, like putting Omarchy Menu on Super + Space
 # unbind = SUPER, SPACE
 # bindd = SUPER, SPACE, Omarchy menu, exec, omarchy-menu
+
+# Logitech MX Keys
+# bind = SUPER SHIFT, S, exec, omarchy-cmd-screenshot          # Print Screen Button
+# bind = SUPER, H, exec, voxtype record toggle                 # Dictation Button
+# bind = SUPER, PERIOD, exec, omarchy-launch-walker -m symbols # Emoji Button

config/hypr/hyprland.conf

@@ -19,5 +19,8 @@ source = ~/.config/hypr/bindings.conf
 source = ~/.config/hypr/looknfeel.conf
 source = ~/.config/hypr/autostart.conf
 
+# Toggle config flags dynamically
+source = ~/.local/state/omarchy/toggles/hypr/*.conf
+
 # Add any other personal Hyprland configuration below
 # windowrule = workspace 5, match:class qemu

config/hypr/input.conf

@@ -11,14 +11,14 @@ input {
 
   # Change speed of keyboard repeat
   repeat_rate = 40
-  repeat_delay = 600
+  repeat_delay = 250
 
   # Start with numlock on by default
   numlock_by_default = true
 
   # Increase sensitivity for mouse/trackpad (default: 0)
   # sensitivity = 0.35
-  
+
   # Turn off mouse acceleration (default: false)
   # force_no_accel = true
 
@@ -47,3 +47,7 @@ windowrule = match:class com.mitchellh.ghostty, scroll_touchpad 0.2
 # Enable touchpad gestures for changing workspaces
 # See https://wiki.hyprland.org/Configuring/Gestures/
 # gesture = 3, horizontal, workspace
+
+# Enable touchpad gestures for moving focus (helpful on scrolling layout)
+# gesture = 3, left,  dispatcher, movefocus, l
+# gesture = 3, right, dispatcher, movefocus, r

config/hypr/looknfeel.conf

@@ -7,8 +7,8 @@ general {
     # gaps_out = 0
     # border_size = 0
 
-    # Use master layout instead of dwindle
-    # layout = master
+    # Change to niri-like side-scrolling layout
+    # layout = scrolling
 }
 
 # https://wiki.hyprland.org/Configuring/Variables/#decoration
@@ -27,8 +27,8 @@ animations {
     # enabled = no
 }
 
-# https://wiki.hypr.land/Configuring/Dwindle-Layout/
-dwindle {
+# https://wiki.hypr.land/Configuring/Variables/#layout
+layout {
     # Avoid overly wide single-window layouts on wide screens
     # single_window_aspect_ratio = 1 1
 }

config/hypr/monitors.conf

@@ -21,3 +21,6 @@ monitor=,preferred,auto,auto
 # Example for Framework 13 w/ 6K XDR Apple display
 # monitor = DP-5, 6016x3384@60, auto, 2
 # monitor = eDP-1, 2880x1920@120, auto, 2
+
+# Disable the second ghost monitor on an Apple 6K XDR over Thunderbolt
+# monitor=DP-2,disable

config/hyprland-preview-share-picker/config.yaml

@@ -3,7 +3,7 @@
 # relative paths are resolved relative to the location of the config file
 stylesheets: ["../omarchy/current/theme/hyprland-preview-share-picker.css"]
 # default page selected when the picker is opened
-default_page: windows
+default_page: outputs
 
 window:
   # height of the application window

config/omarchy/hooks/battery-low.sample

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# This hook is called with the current battery percentage when the low battery
+# notification is sent. To put it into use, remove .sample from the name.
+
+SOUND_FILE="/usr/share/sounds/freedesktop/stereo/dialog-warning.oga"
+
+if omarchy-cmd-present mpv && [[ -f $SOUND_FILE ]]; then
+  mpv --no-video "$SOUND_FILE" >/dev/null 2>&1
+fi

config/omarchy/hooks/font-set.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show the name of the theme that was just set.
-# notify-send "New font" "Your new font is $1"
+# notify-send -u low "New font" "Your new font is $1"

config/omarchy/hooks/post-update.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show notification after the system has been updated.
-# notify-send "Update Performed" "Your system is now up to date"
+# notify-send -u low "Update Performed" "Your system is now up to date"

config/omarchy/hooks/theme-set.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show the name of the theme that was just set.
-# notify-send "New theme" "Your new theme is $1"
+# notify-send -u low "New theme" "Your new theme is $1"

config/tmux/tmux.conf

@@ -4,7 +4,7 @@ set -g prefix2 C-b
 bind C-Space send-prefix
 
 # Reload config
-bind q source-file ~/.config/tmux/tmux.conf
+bind q source-file ~/.config/tmux/tmux.conf \; display "Configuration reloaded"
 
 # Vi mode for copy
 setw -g mode-keys vi
@@ -41,6 +41,11 @@ bind -n M-7 select-window -t 7
 bind -n M-8 select-window -t 8
 bind -n M-9 select-window -t 9
 
+bind -n M-Left select-window -t -1
+bind -n M-Right select-window -t +1
+bind -n M-S-Left swap-window -t -1 \; select-window -t -1
+bind -n M-S-Right swap-window -t +1 \; select-window -t +1
+
 # Session controls
 bind R command-prompt -I "#S" "rename-session -- '%%'"
 bind C new-session -c "#{pane_current_path}"
@@ -48,6 +53,9 @@ bind K kill-session
 bind P switch-client -p
 bind N switch-client -n
 
+bind -n M-Up switch-client -p
+bind -n M-Down switch-client -n
+
 # General
 set -g default-terminal "tmux-256color"
 set -ag terminal-overrides ",*:RGB"
@@ -69,11 +77,13 @@ set -g status-interval 5
 set -g status-left-length 30
 set -g status-right-length 50
 set -g window-status-separator ""
+set -gw automatic-rename on
+set -gw automatic-rename-format '#{b:pane_current_path}'
 
 # Theme
 set -g status-style "bg=default,fg=default"
 set -g status-left "#[fg=black,bg=blue,bold] #S #[bg=default] "
-set -g status-right "#[fg=blue]#{?client_prefix,PREFIX ,}#[fg=brightblack]#h "
+set -g status-right "#[fg=blue]#{?pane_in_mode,COPY ,}#{?client_prefix,PREFIX ,}#{?window_zoomed_flag,ZOOM ,}#[fg=brightblack]#h "
 set -g window-status-format "#[fg=brightblack] #I:#W "
 set -g window-status-current-format "#[fg=blue,bold] #I:#W "
 set -g pane-border-style "fg=brightblack"

config/uwsm/env

@@ -2,10 +2,10 @@
 
 # Ensure Omarchy bins are in the path
 export OMARCHY_PATH=$HOME/.local/share/omarchy
-export PATH=$OMARCHY_PATH/bin:$PATH
+export PATH=$OMARCHY_PATH/bin:$PATH:$HOME/.local/bin
 
 # Set default terminal and editor
 source ~/.config/uwsm/default
 
 # Activate mise if present on the system
-omarchy-cmd-present mise && eval "$(mise activate bash)"
+omarchy-cmd-present mise && eval "$(mise activate bash --shims)"

config/waybar/config.jsonc

@@ -72,8 +72,8 @@
     "format-wifi": "{icon}",
     "format-ethernet": "󰀂",
     "format-disconnected": "󰤮",
-    "tooltip-format-wifi": "{essid} ({frequency} GHz)\n⇣{bandwidthDownBytes}  ⇡{bandwidthUpBytes}",
-    "tooltip-format-ethernet": "⇣{bandwidthDownBytes}  ⇡{bandwidthUpBytes}",
+    "tooltip-format-wifi": "{essid} ({frequency} GHz)",
+    "tooltip-format-ethernet": "Connected",
     "tooltip-format-disconnected": "Disconnected",
     "interval": 3,
     "spacing": 1,

default/bash/aliases

@@ -6,18 +6,29 @@ if command -v eza &> /dev/null; then
   alias lta='lt -a'
 fi
 
-alias ff="fzf --preview 'bat --style=numbers --color=always {}'"
+if [[ "$TERM" == "xterm-kitty" ]]; then
+  alias ff="fzf --preview 'case \$(file --mime-type -b {}) in image/*) kitty icat --clear --transfer-mode=memory --stdin=no --place=\${FZF_PREVIEW_COLUMNS}x\${FZF_PREVIEW_LINES}@0x0 {} ;; *) bat --style=numbers --color=always {} ;; esac'"
+else
+  alias ff="fzf --preview 'bat --style=numbers --color=always {}'"
+fi
 alias eff='$EDITOR "$(ff)"'
+sff() { if [ $# -eq 0 ]; then echo "Usage: sff <destination> (e.g. sff host:/tmp/)"; return 1; fi; local file; file=$(find . -type f -printf '%T@\t%p\n' | sort -rn | cut -f2- | ff) && [ -n "$file" ] && scp "$file" "$1"; }
 
 if command -v zoxide &> /dev/null; then
   alias cd="zd"
   zd() {
-    if [ $# -eq 0 ]; then
-      builtin cd ~ && return
-    elif [ -d "$1" ]; then
-      builtin cd "$1"
+    if (( $# == 0 )); then
+      builtin cd ~ || return
+    elif [[ -d $1 ]]; then
+      builtin cd "$1" || return
     else
-      z "$@" && printf "\U000F17A9 " && pwd || echo "Error: Directory not found"
+      if ! z "$@"; then
+        echo "Error: Directory not found"
+        return 1
+      fi
+
+      printf "\U000F17A9 "
+      pwd
     fi
   }
 fi

default/bash/envs

@@ -1,3 +1,7 @@
 # Editor used by CLI
 export SUDO_EDITOR="$EDITOR"
 export BAT_THEME=ansi
+
+# Duplicated from .config/uwsm/env so SSH works too
+export OMARCHY_PATH=$HOME/.local/share/omarchy
+export PATH=$OMARCHY_PATH/bin:$PATH:$HOME/.local/bin

default/bash/fns/transcoding

@@ -13,23 +13,31 @@ img2jpg() {
   img="$1"
   shift
 
-  magick "$img" "$@" -quality 95 -strip "${img%.*}-converted.jpg"
+  magick "$img" "$@" -quality 85 -strip "${img%.*}-converted.jpg"
 }
 
-# Transcode any image to a small JPG (max 1080px wide) that's great for sharing online
+# Transcode any image to a small JPG (max 1080px wide)
 img2jpg-small() {
   img="$1"
   shift
 
-  magick "$img" "$@" -resize 1080x\> -quality 95 -strip "${img%.*}-small.jpg"
+  magick "$img" "$@" -resize 1080x\> -quality 85 -strip "${img%.*}-small.jpg"
 }
 
-# Transcode any image to a medium JPG (max 1800px wide) that's great for sharing online
+# Transcode any image to a 4K JPG (max 2160px wide)
 img2jpg-medium() {
   img="$1"
   shift
 
-  magick "$img" "$@" -resize 1800x\> -quality 95 -strip "${img%.*}-medium.jpg"
+  magick "$img" "$@" -resize 2160x\> -quality 85 -strip "${img%.*}-medium.jpg"
+}
+
+# Transcode any image to a 6K JPG (max 3160px wide)
+img2jpg-large() {
+  img="$1"
+  shift
+
+  magick "$img" "$@" -resize 3160x\> -quality 85 -strip "${img%.*}-large.jpg"
 }
 
 # Transcode any image to compressed-but-lossless PNG

default/bash/fns/worktrees

@@ -0,0 +1,36 @@
+# Create a new worktree and branch from within current git directory.
+ga() {
+  if [[ -z "$1" ]]; then
+    echo "Usage: ga [branch name]"
+    return 1
+  fi
+
+  local branch="$1"
+  local base="$(basename "$PWD")"
+  local wt_path="../${base}--${branch}"
+
+  git worktree add -b "$branch" "$wt_path"
+  mise trust "$wt_path"
+  cd "$wt_path"
+}
+
+# Remove worktree and branch from within active worktree directory.
+gd() {
+  if gum confirm "Remove worktree and branch?"; then
+    local cwd base branch root worktree
+
+    cwd="$(pwd)"
+    worktree="$(basename "$cwd")"
+
+    # split on first `--`
+    root="${worktree%%--*}"
+    branch="${worktree#*--}"
+
+    # Protect against accidentally nuking a non-worktree directory
+    if [[ "$root" != "$worktree" ]]; then
+      cd "../$root"
+      git worktree remove "$cwd" --force || return 1
+      git branch -D "$branch"
+    fi
+  fi
+}

default/bash/init

@@ -2,10 +2,7 @@ if command -v mise &> /dev/null; then
   eval "$(mise activate bash)"
 fi
 
-if command -v starship &> /dev/null; then
-  # clear stale readline state before rendering prompt (prevents artifacts in prompt after abnormal exits like SIGQUIT)
-  __sanitize_prompt() { printf '\r\033[K'; }
-  PROMPT_COMMAND="__sanitize_prompt${PROMPT_COMMAND:+;$PROMPT_COMMAND}"
+if [[ $- == *i* ]] && [[ ${TERM:-} != "dumb" ]] && command -v starship &> /dev/null; then
   eval "$(starship init bash)"
 fi
 
@@ -14,7 +11,7 @@ if command -v zoxide &> /dev/null; then
 fi
 
 if command -v try &> /dev/null; then
-  eval "$(SHELL=/bin/bash try init ~/Work/tries)"
+  eval "$(SHELL=/bin/bash command try init ~/Work/tries)"
 fi
 
 if command -v fzf &> /dev/null; then