Reminder to add to OPR

Prevent race condition
Merge branch 'dev' into toggle-hybrid-gpu
2026-08-02 12:47:49 +02:00 · 2026-01-19 17:09:55 -04:00 · 2026-01-19 14:16:21 -04:00 · 2026-01-19 14:07:36 -04:00 · 2026-01-17 15:00:20 -05:00 · 2026-01-17 14:57:55 -05:00
563 changed files with 1313 additions and 4967 deletions
@@ -1,67 +0,0 @@
-# Style
-
- Two spaces for indentation, no tabs
- Use bash 5 conditionals: use `[[ ]]` for string/file tests and `(( ))` for numeric tests
- In `[[ ]]`, don't quote variables, but do quote string literals when comparing values (e.g., `[[ $branch == "dev" ]]`)
- Prefer `(( ))` over numeric operators inside `[[ ]]` (e.g., `(( count < 50 ))`, not `[[ $count -lt 50 ]]`)
- For strings/paths with spaces, quote them instead of escaping spaces with `\ ` (e.g., `"$APP_DIR/Disk Usage.desktop"`, not `$APP_DIR/Disk\ Usage.desktop`)
- Shebangs must use `#!/bin/bash` consistently (never `#!/usr/bin/env bash`)
-
-# Command Naming
-
-All commands start with `omarchy-`. Prefixes indicate purpose:
-
- `cmd-` - check if commands exist, misc utility commands
- `pkg-` - package management helpers
- `hw-` - hardware detection (return exit codes for use in conditionals)
- `refresh-` - copy default config to user's `~/.config/`
- `restart-` - restart a component
- `launch-` - open applications
- `install-` - install optional software
- `setup-` - interactive setup wizards
- `toggle-` - toggle features on/off
- `theme-` - theme management
- `update-` - update components
-
-# Helper Commands
-
-Use these instead of raw shell commands:
-
- `omarchy-cmd-missing` / `omarchy-cmd-present` - check for commands
- `omarchy-pkg-missing` / `omarchy-pkg-present` - check for packages
- `omarchy-pkg-add` - install packages (handles both pacman and AUR)
- `omarchy-hw-asus-rog` - detect ASUS ROG hardware (and similar `hw-*` commands)
-
-# Config Structure
-
- `config/` - default configs copied to `~/.config/`
- `default/themed/*.tpl` - templates with `{{ variable }}` placeholders for theme colors
- `themes/*/colors.toml` - theme color definitions (accent, background, foreground, color0-15)
-
-# Refresh Pattern
-
-To copy a default config to user config with automatic backup:
-
-```bash
-omarchy-refresh-config hypr/hyprlock.conf
-```
-
-This copies `~/.local/share/omarchy/config/hypr/hyprlock.conf` to `~/.config/hypr/hyprlock.conf`.
-
-# Migrations
-
-To create a new migration, run `omarchy-dev-add-migration --no-edit`. This creates a migration file named after the unix timestamp of the last commit.
-
-Migration format:
- No shebang line
- Start with an `echo` describing what the migration does
- Use `$OMARCHY_PATH` to reference the omarchy directory
-
-Example:
-```bash
-echo "Disable fingerprint in hyprlock if fingerprint auth is not configured"
-
-if omarchy-cmd-missing fprintd-list || ! fprintd-list "$USER" 2>/dev/null | grep -q "finger"; then
-  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = false/' ~/.config/hypr/hyprlock.conf
-fi
-```
@@ -1,21 +0,0 @@
-[Desktop Entry]
-Type=Application
-TryExec=alacritty
-Exec=alacritty
-Icon=Alacritty
-Terminal=false
-Categories=System;TerminalEmulator;
-Name=Alacritty
-GenericName=Terminal
-Comment=A fast, cross-platform, OpenGL terminal emulator
-StartupNotify=true
-StartupWMClass=Alacritty
-Actions=New;
-X-TerminalArgExec=-e
-X-TerminalArgAppId=--class=
-X-TerminalArgTitle=--title=
-X-TerminalArgDir=--working-directory=
-
-[Desktop Action New]
-Name=New Terminal
-Exec=alacritty
@@ -1,2 +0,0 @@
-[Desktop Entry]
-Hidden=true
@@ -1,2 +0,0 @@
-[Desktop Entry]
-Hidden=true
@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Returns true if AC power is connected.
-
-for ac in /sys/class/power_supply/AC* /sys/class/power_supply/ADP*; do
-  [[ -r $ac/online && $(cat "$ac/online") == "1" ]] && exit 0
-done
-
-exit 1
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# Returns the battery full capacity in Wh (rounded to whole number).
-# Used by omarchy-battery-status for displaying battery capacity.
-
-battery_info=$(upower -i $(upower -e | grep BAT))
-
-echo "$battery_info" | awk '/energy-full:/ {
-    printf "%d", $2
-    exit
-}'
@@ -9,11 +9,10 @@ BATTERY_STATE=$(upower -i $(upower -e | grep 'BAT') | grep -E "state" | awk '{pr

 send_notification() {
  notify-send -u critical "󱐋 Time to recharge!" "Battery is down to ${1}%" -i battery-caution -t 30000
-  omarchy-hook battery-low "$1"
 }

-if [[ -n $BATTERY_LEVEL && $BATTERY_LEVEL =~ ^[0-9]+$ ]]; then
-  if [[ $BATTERY_STATE == "discharging" ]] && (( BATTERY_LEVEL <= BATTERY_THRESHOLD )); then
+if [[ -n "$BATTERY_LEVEL" && "$BATTERY_LEVEL" =~ ^[0-9]+$ ]]; then
+  if [[ $BATTERY_STATE == "discharging" && $BATTERY_LEVEL -le $BATTERY_THRESHOLD ]]; then
    if [[ ! -f $NOTIFICATION_FLAG ]]; then
      send_notification $BATTERY_LEVEL
      touch $NOTIFICATION_FLAG
@@ -1,13 +0,0 @@
-#!/bin/bash
-
-# Returns true if a battery is present on the system.
-# Used by the battery monitor and other battery-related checks.
-
-for bat in /sys/class/power_supply/BAT*; do
-  [[ -r $bat/present ]] &&
-  [[ $(cat $bat/present) == "1" ]] &&
-  [[ $(cat $bat/type) == "Battery" ]] &&
-  exit 0
-done
-
-exit 1
@@ -3,7 +3,10 @@
 # Returns the battery percentage remaining as an integer.
 # Used by the battery monitor and the Ctrl + Shift + Super + B hotkey.

-upower -i $(upower -e | grep BAT) | awk '/percentage/ { 
-    print int($2)
+upower -i $(upower -e | grep BAT) \
+| awk -F: '/percentage/ {
+    gsub(/[%[:space:]]/, "", $2);
+    val=$2;
+    printf("%d\n", (val+0.5))
    exit
-}'
+  }'
@@ -1,22 +0,0 @@
-#!/bin/bash
-
-# Returns the battery time remaining (to empty or full) in a compact format.
-
-battery_info=$(upower -i $(upower -e | grep BAT))
-
-echo "$battery_info" | awk '/time to (empty|full)/ {
-    value = $4
-    unit = $5
-    if (unit ~ /^minute/) {
-        printf "%dm", int(value)
-    } else {
-        hours = int(value)
-        minutes = int((value - hours) * 60)
-        if (minutes > 0) {
-            printf "%dh %dm", hours, minutes
-        } else {
-            printf "%dh", hours
-        }
-    }
-    exit
-}'
@@ -1,28 +0,0 @@
-#!/bin/bash
-
-# Returns a formatted battery status string with percentage and power draw/charge.
-# Used by the battery notification hotkey (Ctrl + Shift + Super + B).
-
-battery_info=$(upower -i $(upower -e | grep BAT))
-
-percentage=$(echo "$battery_info" | awk '/percentage/ {
-    print int($2)
-    exit
-}')
-
-power_rate=$(echo "$battery_info" | awk '/energy-rate/ {
-    rounded = sprintf("%.1f", $2)
-    sub(/\.0$/, "", rounded)
-    print rounded
-    exit
-}')
-
-state=$(echo "$battery_info" | awk '/state/ { print $2; exit }')
-time_remaining=$(omarchy-battery-remaining-time)
-capacity=$(omarchy-battery-capacity)
-
-if [[ $state == "charging" ]]; then
-    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} to full  ·   ${power_rate}W / ${capacity}Wh"
-else
-    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} left  ·   ${power_rate}W / ${capacity}Wh"
-fi
@@ -3,15 +3,14 @@
 # Set the branch for Omarchy's git repository.

 if (($# == 0)); then
-  echo "Usage: omarchy-branch-set [master|rc|dev]"
+  echo "Usage: omarchy-branch-set [master|dev]"
  exit 1
 else
  branch="$1"
 fi

-if [[ $branch != "master" && $branch != "rc" && $branch != "dev" ]]; then
-  echo "Error: Invalid branch '$branch'. Must be one of: master, rc, dev"
-  exit 1
-fi
-
-git -C $OMARCHY_PATH switch $branch
+case "$branch" in
+  "master") git -C $OMARCHY_PATH switch master ;;
+  "dev") git -C $OMARCHY_PATH switch dev ;;
+  *) echo "Unknown branch: $branch"; exit 1; ;;
+esac
@@ -1,47 +0,0 @@
-#!/bin/bash
-
-# Adjust keyboard backlight brightness using available steps.
-# Usage: omarchy-brightness-keyboard <up|down|cycle>
-
-direction="${1:-up}"
-
-# Find keyboard backlight device (look for *kbd_backlight* pattern in leds class).
-device=""
-for candidate in /sys/class/leds/*kbd_backlight*; do
-  if [[ -e $candidate ]]; then
-    device="$(basename "$candidate")"
-    break
-  fi
-done
-
-if [[ -z $device ]]; then
-  echo "No keyboard backlight device found" >&2
-  exit 1
-fi
-
-# Get current and max brightness to determine step size.
-max_brightness="$(brightnessctl -d "$device" max)"
-current_brightness="$(brightnessctl -d "$device" get)"
-
-# Calculate step as 10% of max brightness. Keyboards with many levels (e.g. 512)
-# need larger steps; keyboards with few levels (e.g. 3) fall back to step=1.
-step=$(( max_brightness / 10 ))
-(( step < 1 )) && step=1
-
-if [[ $direction == "cycle" ]]; then
-  new_brightness=$(( current_brightness + step ))
-  (( new_brightness > max_brightness )) && new_brightness=0
-elif [[ $direction == "up" ]]; then
-  new_brightness=$(( current_brightness + step ))
-  (( new_brightness > max_brightness )) && new_brightness=$max_brightness
-else
-  new_brightness=$(( current_brightness - step ))
-  (( new_brightness < 0 )) && new_brightness=0
-fi
-
-# Set the new brightness.
-brightnessctl -d "$device" set "$new_brightness" >/dev/null
-
-# Use SwayOSD to display the new brightness setting.
-percent=$((new_brightness * 100 / max_brightness))
-omarchy-swayosd-kbd-brightness "$percent"
@@ -14,15 +14,14 @@
 # and people with a lot of experience managing Linux systems.

 if (($# == 0)); then
-  echo "Usage: omarchy-channel-set [stable|rc|edge|dev]"
+  echo "Usage: omarchy-channel-set [stable|edge|dev]"
  exit 1
 else
  channel="$1"
 fi

 case "$channel" in
-"stable") omarchy-branch-set "master" && omarchy-refresh-pacman "stable" ;;
-"rc") omarchy-branch-set "rc" && omarchy-refresh-pacman "rc" ;;
+"stable") omarchy-branch-set "master" && omarchy-refresh-pacman "stable" && sudo pacman -Suu --noconfirm ;;
 "edge") omarchy-branch-set "master" && omarchy-refresh-pacman "edge" ;;
 "dev") omarchy-branch-set "dev" && omarchy-refresh-pacman "edge" ;;
 *) echo "Unknown channel: $channel"; exit 1; ;;
@@ -2,7 +2,7 @@

 # Adjust the brightness on Apple Studio Displays and Apple XDR Displays using asdcontrol.

-if (( $# == 0 )); then
+if [[ $# -eq 0 ]]; then
  echo "Adjust Apple Display Brightness by passing +5000 or -5000 (or any range from 0-60000)"
 else
  device="$(sudo asdcontrol --detect /dev/usb/hiddev* | grep ^/dev/usb/hiddev | cut -d: -f1)"
@@ -2,12 +2,12 @@

 # Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.

-focused_monitor=$(omarchy-hyprland-monitor-focused)
+focused_monitor="$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"

 sinks=$(pactl -f json list sinks | jq '[.[] | select((.ports | length == 0) or ([.ports[]? | .availability != "not available"] | any))]')
 sinks_count=$(echo "$sinks" | jq '. | length')

-if (( sinks_count == 0 )); then
+if [ "$sinks_count" -eq 0 ]; then
  swayosd-client \
    --monitor "$focused_monitor" \
    --custom-message "No audio devices found"
@@ -17,7 +17,7 @@ fi
 current_sink_name=$(pactl get-default-sink)
 current_sink_index=$(echo "$sinks" | jq -r --arg name "$current_sink_name" 'map(.name) | index($name)')

-if [[ $current_sink_index != "null" ]]; then
+if [ "$current_sink_index" != "null" ]; then
  next_sink_index=$(((current_sink_index + 1) % sinks_count))
 else
  next_sink_index=0
@@ -27,28 +27,20 @@ next_sink=$(echo "$sinks" | jq -r ".[$next_sink_index]")
 next_sink_name=$(echo "$next_sink" | jq -r '.name')

 next_sink_description=$(echo "$next_sink" | jq -r '.description')
-if [[ $next_sink_description == "(null)" ]] || [[ $next_sink_description == "null" ]] || [[ -z $next_sink_description ]]; then
-  # For Bluetooth devices, the friendly name is on the Device entry (device.id), not the Sink entry (object.id)
-  device_id=$(echo "$next_sink" | jq -r '.properties."device.id"')
-  if [[ $device_id != "null" ]] && [[ -n $device_id ]]; then
-    next_sink_description=$(wpctl status | grep -E "^\s*│?\s+${device_id}\." | sed -E 's/^.*[0-9]+\.\s+//' | sed -E 's/\s+\[.*$//')
-  fi
-  # Fall back to object.id lookup if device.id didn't yield a result
-  if [[ -z $next_sink_description ]]; then
-    sink_id=$(echo "$next_sink" | jq -r '.properties."object.id"')
-    next_sink_description=$(wpctl status | grep -E "\s+\*?\s+${sink_id}\." | sed -E 's/^.*[0-9]+\.\s+//' | sed -E 's/\s+\[.*$//')
-  fi
+if [ "$next_sink_description" = "(null)" ] || [ "$next_sink_description" = "null" ] || [ -z "$next_sink_description" ]; then
+  sink_id=$(echo "$next_sink" | jq -r '.properties."object.id"')
+  next_sink_description=$(wpctl status | grep -E "\s+\*?\s+${sink_id}\." | sed -E 's/^.*[0-9]+\.\s+//' | sed -E 's/\s+\[.*$//')
 fi

 next_sink_volume=$(echo "$next_sink" | jq -r \
  '.volume | to_entries[0].value.value_percent | sub("%"; "")')
 next_sink_is_muted=$(echo "$next_sink" | jq -r '.mute')

-if [[ $next_sink_is_muted = "true" ]] || (( next_sink_volume == 0 )); then
+if [ "$next_sink_is_muted" = "true" ] || [ "$next_sink_volume" -eq 0 ]; then
  icon_state="muted"
-elif (( next_sink_volume <= 33 )); then
+elif [ "$next_sink_volume" -le 33 ]; then
  icon_state="low"
-elif (( next_sink_volume <= 66 )); then
+elif [ "$next_sink_volume" -le 66 ]; then
  icon_state="medium"
 else
  icon_state="high"
@@ -56,7 +48,7 @@ fi

 next_sink_volume_icon="sink-volume-${icon_state}-symbolic"

-if [[ $next_sink_name != $current_sink_name ]]; then
+if [ "$next_sink_name" != "$current_sink_name" ]; then
  pactl set-default-sink "$next_sink_name"
 fi

@@ -1,14 +1,14 @@
 #!/bin/bash

 # Adjust brightness on the most likely display device.
-# Usage: omarchy-brightness-display <step>
+# Usage: omarchy-cmd-brightness <step>

 step="${1:-+5%}"

 # Start with the first possible output, then refine to the most likely given an order heuristic.
 device="$(ls -1 /sys/class/backlight 2>/dev/null | head -n1)"
 for candidate in amdgpu_bl* intel_backlight acpi_video*; do
-  if [[ -e /sys/class/backlight/$candidate ]]; then
+  if [[ -e "/sys/class/backlight/$candidate" ]]; then
    device="$candidate"
    break
  fi
@@ -6,7 +6,7 @@ set -e

 FIRST_RUN_MODE=~/.local/state/omarchy/first-run.mode

-if [[ -f $FIRST_RUN_MODE ]]; then
+if [[ -f "$FIRST_RUN_MODE" ]]; then
  rm -f "$FIRST_RUN_MODE"

  bash "$OMARCHY_PATH/install/first-run/battery-monitor.sh"
@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Toggle microphone mute. Dell XPS systems get special handling for the hardware LED.
-
-if omarchy-hw-match "XPS"; then
-  omarchy-cmd-mic-mute-xps
-else
-  swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)" --input-volume mute-toggle
-fi
@@ -1,44 +0,0 @@
-#!/bin/bash
-
-# Toggle microphone mute on Dell XPS systems. Uses wpctl for reliable toggling
-# and syncs the ALSA capture switch so the hardware mic mute LED follows state.
-
-wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
-
-if pactl get-source-mute @DEFAULT_SOURCE@ | rg -q 'yes'; then
-  alsa_value='off,off'
-  osd_message='Microphone muted'
-  osd_icon='microphone-sensitivity-muted-symbolic'
-else
-  alsa_value='on,on'
-  osd_message='Microphone on'
-  osd_icon='audio-input-microphone-symbolic'
-fi
-
-if [[ -e /sys/class/leds/platform::micmute/brightness ]]; then
-  default_source=$(pactl get-default-source)
-  alsa_card=$(pactl -f json list sources | jq -r --arg source "$default_source" '
-    .[] | select(.name == $source) |
-    .properties["alsa.card"] // .properties["api.alsa.card"] // .properties["api.alsa.pcm.card"] // empty
-  ' | head -1)
-
-  if [[ -n $alsa_card ]]; then
-    cards=("$alsa_card")
-  else
-    mapfile -t cards < <(compgen -G '/proc/asound/card*' | rg -o 'card[0-9]+' | sed 's/card//' | sort -u)
-  fi
-
-  for card in "${cards[@]}"; do
-    while IFS= read -r control; do
-      if [[ $control != *"Jack Microphone"* ]]; then
-        amixer -c "$card" cset "$control" "$alsa_value" >/dev/null 2>&1 || true
-        break 2
-      fi
-    done < <(amixer -c "$card" controls 2>/dev/null | rg -o "name='[^']*Microphone Capture Switch'")
-  done
-fi
-
-swayosd-client \
-  --monitor "$(omarchy-hyprland-monitor-focused)" \
-  --custom-message "$osd_message" \
-  --custom-icon "$osd_icon"
@@ -2,13 +2,11 @@

 # Start and stop a screenrecording, which will be saved to ~/Videos by default.
 # Alternative location can be set via OMARCHY_SCREENRECORD_DIR or XDG_VIDEOS_DIR ENVs.
-# Resolution is capped to 4K for monitors above 4K, native otherwise.
-# Override via --resolution= (e.g. --resolution=1920x1080, --resolution=0x0 for native).

 [[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
 OUTPUT_DIR="${OMARCHY_SCREENRECORD_DIR:-${XDG_VIDEOS_DIR:-$HOME/Videos}}"

-if [[ ! -d $OUTPUT_DIR ]]; then
+if [[ ! -d "$OUTPUT_DIR" ]]; then
  notify-send "Screen recording directory does not exist: $OUTPUT_DIR" -u critical -t 3000
  exit 1
 fi
@@ -16,34 +14,24 @@ fi
 DESKTOP_AUDIO="false"
 MICROPHONE_AUDIO="false"
 WEBCAM="false"
-WEBCAM_DEVICE=""
-RESOLUTION=""
 STOP_RECORDING="false"
-RECORDING_FILE="/tmp/omarchy-screenrecord-filename"

 for arg in "$@"; do
  case "$arg" in
-  --with-desktop-audio) DESKTOP_AUDIO="true" ;;
-  --with-microphone-audio) MICROPHONE_AUDIO="true" ;;
-  --with-webcam) WEBCAM="true" ;;
-  --webcam-device=*) WEBCAM_DEVICE="${arg#*=}" ;;
-  --resolution=*) RESOLUTION="${arg#*=}" ;;
-  --stop-recording) STOP_RECORDING="true" ;;
+    --with-desktop-audio) DESKTOP_AUDIO="true" ;;
+    --with-microphone-audio) MICROPHONE_AUDIO="true" ;;
+    --with-webcam) WEBCAM="true" ;;
+    --stop-recording) STOP_RECORDING="true"
  esac
 done

+cleanup_webcam() {
+  pkill -f "WebcamOverlay" 2>/dev/null
+}
+
 start_webcam_overlay() {
  cleanup_webcam

-  # Auto-detect first available webcam if none specified
-  if [[ -z $WEBCAM_DEVICE ]]; then
-    WEBCAM_DEVICE=$(v4l2-ctl --list-devices 2>/dev/null | grep -m1 "^[[:space:]]*/dev/video" | tr -d '\t')
-    if [[ -z $WEBCAM_DEVICE ]]; then
-      notify-send "No webcam devices found" -u critical -t 3000
-      return 1
-    fi
-  fi
-
  # Get monitor scale
  local scale=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .scale')

@@ -53,7 +41,7 @@ start_webcam_overlay() {
  # Try preferred 16:9 resolutions in order, use first available
  local preferred_resolutions=("640x360" "1280x720" "1920x1080")
  local video_size_arg=""
-  local available_formats=$(v4l2-ctl --list-formats-ext -d "$WEBCAM_DEVICE" 2>/dev/null)
+  local available_formats=$(v4l2-ctl --list-formats-ext -d /dev/video0 2>/dev/null)

  for resolution in "${preferred_resolutions[@]}"; do
    if echo "$available_formats" | grep -q "$resolution"; then
@@ -62,8 +50,8 @@ start_webcam_overlay() {
    fi
  done

-  ffplay -f v4l2 $video_size_arg -framerate 30 "$WEBCAM_DEVICE" \
-    -vf "crop=iw/2:ih,scale=${target_width}:-1" \
+  ffplay -f v4l2 $video_size_arg -framerate 30 /dev/video0 \
+    -vf "scale=${target_width}:-1" \
    -window_title "WebcamOverlay" \
    -noborder \
    -fflags nobuffer -flags low_delay \
@@ -72,83 +60,44 @@ start_webcam_overlay() {
  sleep 1
 }

-cleanup_webcam() {
-  pkill -f "WebcamOverlay" 2>/dev/null
-}
-
-default_resolution() {
-  local width height
-  read -r width height < <(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | "\(.width) \(.height)"')
-  if ((width > 3840 || height > 2160)); then
-    echo "3840x2160"
-  else
-    echo "0x0"
-  fi
-}
-
 start_screenrecording() {
  local filename="$OUTPUT_DIR/screenrecording-$(date +'%Y-%m-%d_%H-%M-%S').mp4"
  local audio_devices=""
-  local audio_args=()
+  local audio_args=""

-  [[ $DESKTOP_AUDIO == "true" ]] && audio_devices+="default_output"
+  [[ "$DESKTOP_AUDIO" == "true" ]] && audio_devices+="default_output"

-  if [[ $MICROPHONE_AUDIO == "true" ]]; then
+  if [[ "$MICROPHONE_AUDIO" == "true" ]]; then
    # Merge audio tracks into one - separate tracks only play one at a time in most players
-    [[ -n $audio_devices ]] && audio_devices+="|"
+    [[ -n "$audio_devices" ]] && audio_devices+="|"
    audio_devices+="default_input"
  fi

-  [[ -n $audio_devices ]] && audio_args+=(-a "$audio_devices" -ac aac)
+  [[ -n "$audio_devices" ]] && audio_args+="-a $audio_devices"

-  local resolution="${RESOLUTION:-$(default_resolution)}"
-
-  gpu-screen-recorder -w portal -k auto -s "$resolution" -f 60 -fm cfr -fallback-cpu-encoding yes -o "$filename" "${audio_args[@]}" &
-  local pid=$!
-
-  # Wait for recording to actually start (file appears after portal selection)
-  while kill -0 $pid 2>/dev/null && [[ ! -f $filename ]]; do
-    sleep 0.2
-  done
-
-  if kill -0 $pid 2>/dev/null; then
-    echo "$filename" >"$RECORDING_FILE"
-    toggle_screenrecording_indicator
-  fi
+  gpu-screen-recorder -w portal -f 60 -fallback-cpu-encoding yes -o "$filename" $audio_args -ac aac &
+  toggle_screenrecording_indicator
 }

 stop_screenrecording() {
-  pkill -SIGINT -f "^gpu-screen-recorder" # SIGINT required to save video properly
+  pkill -SIGINT -f "^gpu-screen-recorder"  # SIGINT required to save video properly

  # Wait a maximum of 5 seconds to finish before hard killing
  local count=0
-  while pgrep -f "^gpu-screen-recorder" >/dev/null && ((count < 50)); do
+  while pgrep -f "^gpu-screen-recorder" >/dev/null && [ $count -lt 50 ]; do
    sleep 0.1
    count=$((count + 1))
  done

-  toggle_screenrecording_indicator
-  cleanup_webcam
-
  if pgrep -f "^gpu-screen-recorder" >/dev/null; then
    pkill -9 -f "^gpu-screen-recorder"
+    cleanup_webcam
    notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
  else
-    trim_first_frame
-    local filename=$(cat "$RECORDING_FILE" 2>/dev/null)
-    local preview="${filename%.mp4}-preview.png"
-
-    # Generate a preview thumbnail from the first frame
-    ffmpeg -y -i "$filename" -ss 00:00:00.1 -vframes 1 -q:v 2 "$preview" -loglevel quiet 2>/dev/null
-
-    (
-      ACTION=$(notify-send "Screen recording saved" "Open with Super + Alt + , (or click this)" -t 10000 -i "${preview:-$filename}" -A "default=open")
-      [[ $ACTION == "default" ]] && mpv "$filename"
-      rm -f "$preview"
-    ) &
+    cleanup_webcam
+    notify-send "Screen recording saved to $OUTPUT_DIR" -t 2000
  fi
-
-  rm -f "$RECORDING_FILE"
+  toggle_screenrecording_indicator
 }

 toggle_screenrecording_indicator() {
@@ -156,29 +105,19 @@ toggle_screenrecording_indicator() {
 }

 screenrecording_active() {
-  pgrep -f "^gpu-screen-recorder" >/dev/null
-}
-
-trim_first_frame() {
-  local latest
-  latest=$(cat "$RECORDING_FILE" 2>/dev/null)
-
-  if [[ -n $latest && -f $latest ]]; then
-    local trimmed="${latest%.mp4}-trimmed.mp4"
-    if ffmpeg -y -ss 0.1 -i "$latest" -c copy "$trimmed" -loglevel quiet 2>/dev/null; then
-      mv "$trimmed" "$latest"
-    else
-      rm -f "$trimmed"
-    fi
-  fi
+  pgrep -f "^gpu-screen-recorder" >/dev/null || pgrep -f "WebcamOverlay" >/dev/null
 }

 if screenrecording_active; then
-  stop_screenrecording
-elif [[ $STOP_RECORDING == "true" ]]; then
-  exit 1
-else
-  [[ $WEBCAM == "true" ]] && start_webcam_overlay
+  if pgrep -f "WebcamOverlay" >/dev/null && ! pgrep -f "^gpu-screen-recorder" >/dev/null; then
+    cleanup_webcam
+  else
+    stop_screenrecording
+  fi
+elif [[ "$STOP_RECORDING" == "false" ]]; then
+  [[ "$WEBCAM" == "true" ]] && start_webcam_overlay

  start_screenrecording || cleanup_webcam
+else
+  exit 1
 fi
@@ -2,132 +2,85 @@

 # Take a screenshot of the whole screen, a specific window, or a user-drawn region.
 # Saves to ~/Pictures by default, but that can be changed via OMARCHY_SCREENSHOT_DIR or XDG_PICTURES_DIR ENVs.
-# Editor defaults to Satty but can be changed via --editor=<name> or OMARCHY_SCREENSHOT_EDITOR env

 [[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
 OUTPUT_DIR="${OMARCHY_SCREENSHOT_DIR:-${XDG_PICTURES_DIR:-$HOME/Pictures}}"

-if [[ ! -d $OUTPUT_DIR ]]; then
-  mkdir -p "$OUTPUT_DIR"
-  notify-send "Created screenshot directory: $OUTPUT_DIR" -u normal -t 2000
+if [[ ! -d "$OUTPUT_DIR" ]]; then
+  notify-send "Screenshot directory does not exist: $OUTPUT_DIR" -u critical -t 3000
+  exit 1
 fi

 pkill slurp && exit 0

-SCREENSHOT_EDITOR="${OMARCHY_SCREENSHOT_EDITOR:-satty}"
-
-# Parse --editor flag from any position
-ARGS=()
-for arg in "$@"; do
-  if [[ $arg == --editor=* ]]; then
-    SCREENSHOT_EDITOR="${arg#--editor=}"
-  else
-    ARGS+=("$arg")
-  fi
-done
-set -- "${ARGS[@]}"
-
-open_editor() {
-  local filepath="$1"
-  if [[ $SCREENSHOT_EDITOR == "satty" ]]; then
-    satty --filename "$filepath" \
-      --output-filename "$filepath" \
-      --actions-on-enter save-to-clipboard \
-      --save-after-copy \
-      --copy-command 'wl-copy'
-  else
-    $SCREENSHOT_EDITOR "$filepath"
-  fi
-}
-
 MODE="${1:-smart}"
 PROCESSING="${2:-slurp}"

-# accounting for portrait/transformed displays
-JQ_MONITOR_GEO='
-  def format_geo:
-    .x as $x | .y as $y |
-    (.width / .scale | floor) as $w |
-    (.height / .scale | floor) as $h |
-    .transform as $t |
-    if $t == 1 or $t == 3 then
-      "\($x),\($y) \($h)x\($w)"
-    else
-      "\($x),\($y) \($w)x\($h)"
-    end;
-'
-
 get_rectangles() {
  local active_workspace=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .activeWorkspace.id')
-  hyprctl monitors -j | jq -r --arg ws "$active_workspace" "${JQ_MONITOR_GEO} .[] | select(.activeWorkspace.id == (\$ws | tonumber)) | format_geo"
+  hyprctl monitors -j | jq -r --arg ws "$active_workspace" '.[] | select(.activeWorkspace.id == ($ws | tonumber)) | "\(.x),\(.y) \((.width / .scale) | floor)x\((.height / .scale) | floor)"'
  hyprctl clients -j | jq -r --arg ws "$active_workspace" '.[] | select(.workspace.id == ($ws | tonumber)) | "\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1])"'
 }

 # Select based on mode
 case "$MODE" in
-region)
-  hyprpicker -r -z >/dev/null 2>&1 &
-  PID=$!
-  sleep .1
-  SELECTION=$(slurp 2>/dev/null)
-  kill $PID 2>/dev/null
-  ;;
-windows)
-  hyprpicker -r -z >/dev/null 2>&1 &
-  PID=$!
-  sleep .1
-  SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
-  kill $PID 2>/dev/null
-  ;;
-fullscreen)
-  SELECTION=$(hyprctl monitors -j | jq -r "${JQ_MONITOR_GEO} .[] | select(.focused == true) | format_geo")
-  ;;
-smart | *)
-  RECTS=$(get_rectangles)
-  hyprpicker -r -z >/dev/null 2>&1 &
-  PID=$!
-  sleep .1
-  SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
-  kill $PID 2>/dev/null
+  region)
+    wayfreeze & PID=$!
+    sleep .1
+    SELECTION=$(slurp 2>/dev/null)
+    kill $PID 2>/dev/null
+    ;;
+  windows)
+    wayfreeze & PID=$!
+    sleep .1
+    SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
+    kill $PID 2>/dev/null
+    ;;
+  fullscreen)
+    SELECTION=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | "\(.x),\(.y) \((.width / .scale) | floor)x\((.height / .scale) | floor)"')
+    ;;
+  smart|*)
+    RECTS=$(get_rectangles)
+    wayfreeze & PID=$!
+    sleep .1
+    SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
+    kill $PID 2>/dev/null

-  # If the selection area is L * W < 20, we'll assume you were trying to select whichever
-  # window or output it was inside of to prevent accidental 2px snapshots
-  if [[ $SELECTION =~ ^([0-9]+),([0-9]+)[[:space:]]([0-9]+)x([0-9]+)$ ]]; then
-    if ((${BASH_REMATCH[3]} * ${BASH_REMATCH[4]} < 20)); then
-      click_x="${BASH_REMATCH[1]}"
-      click_y="${BASH_REMATCH[2]}"
+    # If the selction area is L * W < 20, we'll assume you were trying to select whichever
+    # window or output it was inside of to prevent accidental 2px snapshots
+    if [[ "$SELECTION" =~ ^([0-9]+),([0-9]+)[[:space:]]([0-9]+)x([0-9]+)$ ]]; then
+      if (( ${BASH_REMATCH[3]} * ${BASH_REMATCH[4]} < 20 )); then
+        click_x="${BASH_REMATCH[1]}"
+        click_y="${BASH_REMATCH[2]}"

-      while IFS= read -r rect; do
-        if [[ $rect =~ ^([0-9]+),([0-9]+)[[:space:]]([0-9]+)x([0-9]+) ]]; then
-          rect_x="${BASH_REMATCH[1]}"
-          rect_y="${BASH_REMATCH[2]}"
-          rect_width="${BASH_REMATCH[3]}"
-          rect_height="${BASH_REMATCH[4]}"
+        while IFS= read -r rect; do
+          if [[ "$rect" =~ ^([0-9]+),([0-9]+)[[:space:]]([0-9]+)x([0-9]+) ]]; then
+            rect_x="${BASH_REMATCH[1]}"
+            rect_y="${BASH_REMATCH[2]}"
+            rect_width="${BASH_REMATCH[3]}"
+            rect_height="${BASH_REMATCH[4]}"

-          if ((click_x >= rect_x && click_x < rect_x + rect_width && click_y >= rect_y && click_y < rect_y + rect_height)); then
-            SELECTION="${rect_x},${rect_y} ${rect_width}x${rect_height}"
-            break
+            if (( click_x >= rect_x && click_x < rect_x+rect_width && click_y >= rect_y && click_y < rect_y+rect_height )); then
+              SELECTION="${rect_x},${rect_y} ${rect_width}x${rect_height}"
+              break
+            fi
          fi
-        fi
-      done <<<"$RECTS"
+        done <<< "$RECTS"
+      fi
    fi
-  fi
-  ;;
+    ;;
 esac

-[[ -z $SELECTION ]] && exit 0
-
-FILENAME="screenshot-$(date +'%Y-%m-%d_%H-%M-%S').png"
-FILEPATH="$OUTPUT_DIR/$FILENAME"
+[ -z "$SELECTION" ] && exit 0

 if [[ $PROCESSING == "slurp" ]]; then
-  grim -g "$SELECTION" "$FILEPATH" || exit 1
-  wl-copy <"$FILEPATH"
-
-  (
-    ACTION=$(notify-send "Screenshot saved to clipboard and file" "Edit with Super + Alt + , (or click this)" -t 10000 -i "$FILEPATH" -A "default=edit")
-    [[ $ACTION == "default" ]] && open_editor "$FILEPATH"
-  ) &
+grim -g "$SELECTION" - |
+  satty --filename - \
+    --output-filename "$OUTPUT_DIR/screenshot-$(date +'%Y-%m-%d_%H-%M-%S').png" \
+    --early-exit \
+    --actions-on-enter save-to-clipboard \
+    --save-after-copy \
+    --copy-command 'wl-copy'
 else
  grim -g "$SELECTION" - | wl-copy
 fi
@@ -25,7 +25,7 @@ else
      # Pick one or more files from home directory
      FILES=$(find "$HOME" -type f 2>/dev/null | fzf --multi)
    fi
-    [[ -z $FILES ]] && exit 0
+    [ -z "$FILES" ] && exit 0
  fi
 fi

@@ -1,45 +0,0 @@
-#!/bin/bash
-
-# Add an EFI boot entry for the Omarchy UKI, allowing the system to boot directly
-# without a bootloader like Limine. Requires UEFI firmware and a built UKI.
-
-if [[ ! -d /sys/firmware/efi ]]; then
-  echo "Error: System is not booted in UEFI mode" >&2
-  exit 1
-fi
-
-if ! efibootmgr &>/dev/null; then
-  echo "Error: efibootmgr is not available or not functional" >&2
-  exit 1
-fi
-
-if cat /sys/class/dmi/id/bios_vendor 2>/dev/null | grep -qi "American Megatrends"; then
-  echo "Error: American Megatrends firmware may not safely support custom EFI entries" >&2
-  exit 1
-fi
-
-if cat /sys/class/dmi/id/bios_vendor 2>/dev/null | grep -qi "Apple"; then
-  echo "Error: Apple firmware uses its own boot manager" >&2
-  exit 1
-fi
-
-uki_file=$(find /boot/EFI/Linux/ -name "omarchy*.efi" -printf "%f\n" 2>/dev/null | head -1)
-
-if [[ -z $uki_file ]]; then
-  echo "Error: No Omarchy UKI found in /boot/EFI/Linux/" >&2
-  exit 1
-fi
-
-boot_source=$(findmnt -n -o SOURCE /boot)
-disk=$(echo "$boot_source" | sed 's/p\?[0-9]*$//')
-part=$(echo "$boot_source" | grep -o 'p\?[0-9]*$' | sed 's/^p//')
-
-if gum confirm "Setup direct boot (so snapshot booting must be done via bios)?"; then
-  echo "Creating EFI boot entry for $uki_file"
-
-  sudo efibootmgr --create \
-    --disk "$disk" \
-    --part "$part" \
-    --label "Omarchy" \
-    --loader "\\EFI\\Linux\\$uki_file"
-fi
@@ -5,7 +5,7 @@
 NO_SUDO=false
 PRINT_ONLY=false

-while (( $# > 0 )); do
+while [[ $# -gt 0 ]]; do
  case "$1" in
    --no-sudo)
      NO_SUDO=true
@@ -25,7 +25,7 @@ done

 LOG_FILE="/tmp/omarchy-debug.log"

-if [[ $NO_SUDO = "true" ]]; then
+if [ "$NO_SUDO" = true ]; then
  DMESG_OUTPUT="(skipped - --no-sudo flag used)"
 else
  DMESG_OUTPUT="$(sudo dmesg)"
@@ -47,7 +47,7 @@ DMESG
 $DMESG_OUTPUT

 =========================================
-JOURNALCTL (CURRENT BOOT, WARNINGS+ERRORS)
+JOURNALCTL (CURRENT BOOT, ERRORS ONLY)
 =========================================
 $(journalctl -b -p 4..1)

@@ -57,7 +57,7 @@ INSTALLED PACKAGES
 $({ expac -S '%n %v (%r)' $(pacman -Qqe) 2>/dev/null; comm -13 <(pacman -Sql | sort) <(pacman -Qqe | sort) | xargs -r expac -Q '%n %v (AUR)'; } | sort)
 EOF

-if [[ $PRINT_ONLY = "true" ]]; then
+if [ "$PRINT_ONLY" = true ]; then
  cat "$LOG_FILE"
  exit 0
 fi
@@ -73,7 +73,7 @@ case "$ACTION" in
  "Upload log")
    echo "Uploading debug log to 0x0.st..."
    URL=$(curl -sF "file=@$LOG_FILE" -Fexpires=24 https://0x0.st)
-    if (( $? == 0 )) && [[ -n $URL ]]; then
+    if [ $? -eq 0 ] && [ -n "$URL" ]; then
      echo "✓ Log uploaded successfully!"
      echo "Share this URL:"
      echo ""
@@ -7,7 +7,7 @@ cd ~/.local/share/omarchy
 migration_file="$HOME/.local/share/omarchy/migrations/$(git log -1 --format=%cd --date=unix).sh"
 touch $migration_file

-if [[ $1 != "--no-edit" ]]; then
+if [[ "$1" != "--no-edit" ]]; then
  nvim $migration_file
 fi

@@ -11,7 +11,7 @@ fi

 # Find the root drive in case we are looking at partitions
 root_drive=$(lsblk -no PKNAME "$drive" 2>/dev/null | tail -n1)
-if [[ -n $root_drive ]]; then
+if [[ -n "$root_drive" ]]; then
  root_drive="/dev/$root_drive"
 else
  root_drive="$drive"
@@ -19,31 +19,11 @@ fi

 # Get basic disk information
 size=$(lsblk -dno SIZE "$drive" 2>/dev/null)
-vendor=$(lsblk -dno VENDOR "$root_drive" 2>/dev/null | sed 's/ *$//')
-model=$(lsblk -dno MODEL "$root_drive" 2>/dev/null | sed 's/ *$//')
-
-# Combine vendor and model, avoiding duplication
-label=""
-if [[ -n $vendor && -n $model ]]; then
-  if [[ $model == *$vendor* ]]; then
-    label="$model"
-  else
-    label="$vendor $model"
-  fi
-elif [[ -n $model ]]; then
-  label="$model"
-elif [[ -n $vendor ]]; then
-  label="$vendor"
-fi
+model=$(lsblk -dno MODEL "$root_drive" 2>/dev/null)

 # Format display string
 display="$drive"
-[[ -n $size ]] && display="$display ($size)"
-[[ -n $label ]] && display="$display - $label"
-
-# Append compact partition summary
-part_summary=$(lsblk -nro TYPE,NAME,FSTYPE,MOUNTPOINT "$root_drive" 2>/dev/null | \
-  awk '$1=="part" { printf "%s%s%s", s, ($3==""?"unknown":$3), ($4==""?"":"("$4")"); s=", " }')
-[[ -n $part_summary ]] && display+=" [$part_summary]"
+[[ -n "$size" ]] && display="$display ($size)"
+[[ -n "$model" ]] && display="$display - $model"

 echo "$display"
@@ -10,7 +10,7 @@ fi

 drives_with_info=""
 while IFS= read -r drive; do
-  [[ -n $drive ]] || continue
+  [[ -n "$drive" ]] || continue
  drives_with_info+="$(omarchy-drive-info "$drive")"$'\n'
 done <<<"$drives"

@@ -5,7 +5,7 @@
 encrypted_drives=$(blkid -t TYPE=crypto_LUKS -o device)

 if [[ -n $encrypted_drives ]]; then
-  if (( $(wc -l <<<encrypted_drives) == 1 )); then
+  if [[ $(wc -l <<<"$encrypted_drives") -eq 1 ]]; then
    drive_to_change="$encrypted_drives"
  else
    drive_to_change="$(omarchy-drive-select "$encrypted_drives")"
@@ -5,7 +5,7 @@

 font_name="$1"

-if [[ -n $font_name ]]; then
+if [[ -n "$font_name" ]]; then
  if fc-list | grep -iq "$font_name"; then
    if [[ -f ~/.config/alacritty/alacritty.toml ]]; then
      sed -i "s/family = \".*\"/family = \"$font_name\"/g" ~/.config/alacritty/alacritty.toml
@@ -33,7 +33,7 @@ if [[ -n $font_name ]]; then
    omarchy-restart-swayosd

    if pgrep -x ghostty; then
-      notify-send -u low "    You must restart Ghostty to see font change"
+      notify-send "    You must restart Ghostty to see font change"
    fi

    omarchy-hook font-set "$font_name"
@@ -1,94 +0,0 @@
-#!/usr/bin/env python3
-
-"""Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
-
-Monitors touchpad button press events and sends haptic pulses via HID
-feature reports. Required because the kernel's HID haptic subsystem only
-supports Auto Trigger with waveform enumeration, not the simpler Manual
-Trigger protocol used by these Synaptics touchpads.
-"""
-
-import fcntl, glob, os, struct, sys
-
-VENDOR = "06CB"
-REPORT_ID = 0x37
-INTENSITY = 40  # 0-100
-
-# input_event: struct timeval (16 bytes on 64-bit) + type(H) + code(H) + value(i)
-EVENT_FORMAT = "llHHi"
-EVENT_SIZE = struct.calcsize(EVENT_FORMAT)
-EV_KEY = 0x01
-BTN_LEFT = 272
-BTN_RIGHT = 273
-BTN_MIDDLE = 274
-
-# ioctl: HIDIOCSFEATURE(len) = _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
-def HIDIOCSFEATURE(length):
-    return 0xC0000000 | (length << 16) | (ord("H") << 8) | 0x06
-
-
-def find_hidraw():
-    for path in sorted(glob.glob("/sys/class/hidraw/hidraw*")):
-        uevent = os.path.join(path, "device", "uevent")
-        try:
-            with open(uevent) as f:
-                content = f.read().upper()
-            if f"0000{VENDOR}" in content:
-                return os.path.join("/dev", os.path.basename(path))
-        except OSError:
-            continue
-    return None
-
-
-def find_touchpad_event():
-    for path in sorted(glob.glob("/sys/class/input/event*/device/name")):
-        try:
-            with open(path) as f:
-                name = f.read().strip().upper()
-            if VENDOR in name and "TOUCHPAD" in name:
-                event = path.split("/")[-3]
-                return os.path.join("/dev/input", event)
-        except OSError:
-            continue
-    return None
-
-
-def main():
-    hidraw = find_hidraw()
-    if not hidraw:
-        print("No Synaptics haptic touchpad hidraw device found", file=sys.stderr)
-        sys.exit(1)
-
-    event = find_touchpad_event()
-    if not event:
-        print("No Synaptics haptic touchpad input device found", file=sys.stderr)
-        sys.exit(1)
-
-    print(f"Haptic touchpad: hidraw={hidraw} input={event} intensity={INTENSITY}", flush=True)
-
-    haptic_report = struct.pack("BB", REPORT_ID, INTENSITY)
-    ioctl_req = HIDIOCSFEATURE(len(haptic_report))
-
-    hidraw_fd = os.open(hidraw, os.O_RDWR)
-    event_fd = os.open(event, os.O_RDONLY)
-
-    try:
-        while True:
-            data = os.read(event_fd, EVENT_SIZE)
-            if len(data) < EVENT_SIZE:
-                continue
-            _, _, ev_type, code, value = struct.unpack(EVENT_FORMAT, data)
-            if ev_type == EV_KEY and code in (BTN_LEFT, BTN_RIGHT, BTN_MIDDLE) and value == 1:
-                try:
-                    fcntl.ioctl(hidraw_fd, ioctl_req, haptic_report)
-                except OSError:
-                    pass
-    except KeyboardInterrupt:
-        pass
-    finally:
-        os.close(event_fd)
-        os.close(hidraw_fd)
-
-
-if __name__ == "__main__":
-    main()
@@ -11,7 +11,7 @@ SWAPSIZE=$(( 1024 * ${SWAPSIZE_KB:-0} ))

 HIBERNATION_IMAGE_SIZE=$(cat /sys/power/image_size)

-if (( SWAPSIZE > HIBERNATION_IMAGE_SIZE )) && [[ -f /etc/mkinitcpio.conf.d/omarchy_resume.conf ]]; then
+if [[ "$SWAPSIZE" -gt "$HIBERNATION_IMAGE_SIZE" ]] && [[ -f /etc/mkinitcpio.conf.d/omarchy_resume.conf ]]; then
  exit 0
 else
  exit 1
@@ -6,7 +6,7 @@
 MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"

 # Check if hibernation is configured
-if [[ ! -f $MKINITCPIO_CONF ]] || ! grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
+if [ ! -f "$MKINITCPIO_CONF" ] || ! grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
  echo "Hibernation is not set up"
  exit 0
 fi
@@ -25,7 +25,7 @@ if swapon --show | grep -q "$SWAP_FILE"; then
 fi

 # Remove swapfile
-if [[ -f $SWAP_FILE ]]; then
+if [ -f "$SWAP_FILE" ]; then
  echo "Removing swapfile"
  sudo rm "$SWAP_FILE"
 fi
@@ -4,44 +4,26 @@
 # adds a resume hook to mkinitcpio, and configures suspend-then-hibernate.

 if [[ ! -f /sys/power/image_size ]]; then
-  echo -e "Hibernation is not supported on your system" >&2
-  exit 0
+  echo -e "\033[31mError: Hibernation is not supported on your system\033[0m" >&2
+  exit 1
 fi

-if ! command -v limine-mkinitcpio &>/dev/null; then
-  echo "Skipping hibernation setup (requires Limine bootloader)"
-  exit 0
-fi

 MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
-SWAP_FILE="/swap/swapfile"
-RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"

 # Check if hibernation is already configured
-if [[ -f $MKINITCPIO_CONF ]] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
-  # Fix empty resume_offset if btrfs map-swapfile failed during initial setup
-  if [[ -f $RESUME_DROP_IN ]] && grep -q 'resume_offset="$' "$RESUME_DROP_IN" && [[ -f $SWAP_FILE ]]; then
-    RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE" 2>/dev/null)
-    if [[ -n $RESUME_OFFSET ]]; then
-      echo "Fixing empty resume_offset ($RESUME_OFFSET)"
-      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" "$RESUME_DROP_IN"
-      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" /etc/default/limine
-      sudo limine-mkinitcpio
-      sudo limine-update
-    fi
-  fi
+if [ -f "$MKINITCPIO_CONF" ] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
  echo "Hibernation is already set up"
  exit 0
 fi

-if [[ $1 != "--force" ]]; then
-  MEM_TOTAL_HUMAN=$(free --human | awk '/Mem/ {print $2}')
-  if ! gum confirm "Use $MEM_TOTAL_HUMAN on boot drive to make hibernation available?"; then
-    exit 0
-  fi
+MEM_TOTAL_HUMAN=$(free --human | awk '/Mem/ {print $2}')
+if ! gum confirm "Use $MEM_TOTAL_HUMAN on boot drive to make hibernation available?"; then
+  exit 0
 fi

 SWAP_SUBVOLUME="/swap"
+SWAP_FILE="$SWAP_SUBVOLUME/swapfile"

 # Create btrfs subvolume for swap
 if ! sudo btrfs subvolume show "$SWAP_SUBVOLUME" &>/dev/null; then
@@ -75,43 +57,14 @@ sudo mkdir -p /etc/mkinitcpio.conf.d
 echo "Adding resume hook to $MKINITCPIO_CONF"
 echo "HOOKS+=(resume)" | sudo tee "$MKINITCPIO_CONF" >/dev/null

-# Ensure keyboard backlight doesn't prevent sleep
-sudo cp -p "$OMARCHY_PATH/default/systemd/system-sleep/keyboard-backlight" /usr/lib/systemd/system-sleep/
+# Configure suspend-then-hibernate
+echo "Configuring suspend-then-hibernate"
+sudo mkdir -p /etc/systemd/logind.conf.d /etc/systemd/sleep.conf.d
+sudo cp "$OMARCHY_PATH/default/systemd/lid.conf" /etc/systemd/logind.conf.d/
+sudo cp "$OMARCHY_PATH/default/systemd/hibernate.conf" /etc/systemd/sleep.conf.d/

-# Add resume= kernel parameters so the initramfs resume hook knows where to find the
-# hibernation image. Without these, resume happens late (after GPU drivers load) and fails.
-if [[ ! -f $RESUME_DROP_IN ]]; then
-  echo "Adding resume kernel parameters"
-  sudo swapon -p 0 "$SWAP_FILE" 2>/dev/null
-  RESUME_DEVICE=$(findmnt -no SOURCE -T "$SWAP_FILE" | sed 's/\[.*\]//')
-  RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
-  if [[ -n $RESUME_OFFSET ]]; then
-    sudo mkdir -p /etc/limine-entry-tool.d
-    echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
-    sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
-  else
-    echo "Warning: Could not determine resume offset for $SWAP_FILE" >&2
-  fi
-fi
-
-# Use ACPI alarm for RTC wakeup on s2idle systems (needed for suspend-then-hibernate)
-if grep -q "\[s2idle\]" /sys/power/mem_sleep 2>/dev/null; then
-  LIMINE_DROP_IN="/etc/limine-entry-tool.d/rtc-alarm.conf"
-  if [[ ! -f $LIMINE_DROP_IN ]]; then
-    echo "Enabling ACPI RTC alarm for s2idle suspend"
-    sudo mkdir -p /etc/limine-entry-tool.d
-    echo 'KERNEL_CMDLINE[default]+=" rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
-    sudo tee -a /etc/default/limine < "$LIMINE_DROP_IN" >/dev/null
-  fi
-fi
-
-# Regenerate initramfs and boot entry
+# Regenerate initramfs
 echo "Regenerating initramfs..."
 sudo limine-mkinitcpio
-sudo limine-update

-echo
-
-if [[ $1 != "--force" ]] && gum confirm "Reboot to enable hibernation?"; then
-  omarchy-system-reboot
-fi
+echo "Hibernation enabled"
@@ -4,7 +4,7 @@

 set -e

-if (( $# < 1 )); then
+if [[ $# -lt 1 ]]; then
  echo "Usage: omarchy-hook [name] [args...]"
  exit 1
 fi
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer is an Asus ROG machine.
-
-[[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "ASUSTeK COMPUTER INC." ]] &&
-   grep -q "ROG" /sys/class/dmi/id/product_family 2>/dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Match Dell XPS systems with LG OLED panel on Intel Panther Lake (Xe3) GPU.
-
-omarchy-hw-match "XPS" \
-  && omarchy-hw-intel-ptl \
-  && test "$(od -An -tx1 -j8 -N2 /sys/class/drm/card*-eDP-*/edid 2>/dev/null | tr -d ' \n')" = "30e4"
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer is a Framework Laptop 16.
-
-[[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Framework" ]] &&
-  omarchy-hw-match "Laptop 16"
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer has an Intel CPU.
-
-[[ $(grep -m1 "vendor_id" /proc/cpuinfo 2>/dev/null | cut -d: -f2 | tr -d ' ') == "GenuineIntel" ]]
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer has an Intel Panther Lake GPU.
-
-lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Match against the computer's DMI product name (case-insensitive).
-# Usage: omarchy-hw-match "XPS"
-
-grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer is a Microsoft Surface device.
-
-[[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Microsoft Corporation" ]] &&
-  omarchy-hw-match "Surface"
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Detect whether Vulkan is available.
-
-[[ -d /usr/share/vulkan/icd.d ]] &&
-  find /usr/share/vulkan/icd.d -maxdepth 1 -name "*.json" -print -quit | grep -q .
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Toggles transparency for the currently focused window.
-
-hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Print the name of the currently focused Hyprland monitor.
-
-hyprctl monitors -j | jq -r '.[] | select(.focused == true).name'
@@ -1,13 +0,0 @@
-#!/bin/bash
-
-# Disable the internal laptop display. No-op if already disabled or if it
-# would leave no active display.
-
-if omarchy-hyprland-monitors-many; then
-  if omarchy-hyprland-toggle-disabled internal-monitor-disable; then
-    omarchy-hyprland-toggle --enabled-notification "󰍹    Laptop display disabled" internal-monitor-disable
-  fi
-else
-  notify-send -u low "󰍹    Can't disable the only active display"
-  exit 1
-fi
@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Enable the internal laptop display. No-op if already enabled.
-
-if omarchy-hyprland-toggle-enabled internal-monitor-disable; then
-  omarchy-hyprland-toggle --disabled-notification "󰍹    Laptop display enabled" internal-monitor-disable
-fi
@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Re-enable the internal display if it was toggled off and no external monitors
-# are currently active (e.g. external got disconnected live, during sleep, or
-# wasn't present on boot).
-
-if omarchy-hyprland-monitors-none && omarchy-hyprland-toggle-enabled internal-monitor-disable; then
-  omarchy-hyprland-monitor-internal-enable
-fi
@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Toggle the internal laptop display on/off.
-
-if omarchy-hyprland-toggle-enabled internal-monitor-disable; then
-  omarchy-hyprland-monitor-internal-enable
-else
-  omarchy-hyprland-monitor-internal-disable
-fi
@@ -1,22 +0,0 @@
-#!/bin/bash
-
-# Get the active monitor (the one with the cursor)
-MONITOR_INFO=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)')
-ACTIVE_MONITOR=$(echo "$MONITOR_INFO" | jq -r '.name')
-CURRENT_SCALE=$(echo "$MONITOR_INFO" | jq -r '.scale')
-WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
-HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
-REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
-
-# Cycle through scales: 1 → 1.6 → 2 → 3 → 1
-CURRENT_INT=$(awk -v s="$CURRENT_SCALE" 'BEGIN { printf "%.0f", s * 10 }')
-
-case "$CURRENT_INT" in
-10) NEW_SCALE=1.6 ;;
-16) NEW_SCALE=2 ;;
-20) NEW_SCALE=3 ;;
-*) NEW_SCALE=1 ;;
-esac
-
-hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
-notify-send -u low "󰍹    Display scaling set to ${NEW_SCALE}x"
@@ -1,14 +0,0 @@
-#!/bin/bash
-
-# Listen on Hyprland's event socket and recover the internal display whenever
-# a monitor is removed.
-
-SOCKET="$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock"
-
-socat -U - "UNIX-CONNECT:$SOCKET" | while read -r event; do
-  case "$event" in
-    monitorremoved\>\>*|monitorremovedv2\>\>*)
-      omarchy-hyprland-monitor-internal-recover
-      ;;
-  esac
-done
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Returns true when there are multiple monitors connected (so we can disable the internal one)
-
-(( $(hyprctl monitors -j 2>/dev/null | jq length) > 1 ))
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Returns true when no monitors are connected
-
-(( $(hyprctl monitors -j 2>/dev/null | jq length) == 0 ))
@@ -1,31 +0,0 @@
-#!/bin/bash
-
-# Toggle permanent Hyprland flags by copying them into a directory that's sourced entirely.
-
-ENABLED_NOTIFICATION=""
-DISABLED_NOTIFICATION=""
-
-while [[ $# -gt 1 ]]; do
-  case $1 in
-    --enabled-notification) ENABLED_NOTIFICATION="$2"; shift 2 ;;
-    --disabled-notification) DISABLED_NOTIFICATION="$2"; shift 2 ;;
-    *) break ;;
-  esac
-done
-
-FLAG_NAME="$1"
-FLAG="$HOME/.local/state/omarchy/toggles/hypr/$FLAG_NAME.conf"
-FLAG_SOURCE="$OMARCHY_PATH/default/hypr/toggles/$FLAG_NAME.conf"
-
-if [[ -f $FLAG ]]; then
-  rm $FLAG
-  [[ -n $DISABLED_NOTIFICATION ]] && notify-send -u low "$DISABLED_NOTIFICATION"
-elif [[ -f $FLAG_SOURCE ]]; then
-  cp $FLAG_SOURCE $FLAG
-  [[ -n $ENABLED_NOTIFICATION ]] && notify-send -u low "$ENABLED_NOTIFICATION"
-else
-  echo "Flag not found: $FLAG_NAME"
-  exit 1
-fi
-
-hyprctl reload
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Check if a Hyprland toggle is currently disabled (missing).
-
-[[ ! -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Check if a Hyprland toggle is currently enabled.
-
-[[ -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Toggles the window gaps globally between no gaps and the default.
-
-omarchy-hyprland-toggle window-no-gaps
@@ -1,8 +0,0 @@
-#!/bin/bash
-
-# Toggle single-window square aspect ratio.
-
-omarchy-hyprland-toggle \
-  --enabled-notification "      Enable single-window square aspect ratio" \
-  --disabled-notification "      Disable single-window square aspect ratio" \
-  single-window-aspect-ratio
@@ -1,14 +0,0 @@
-#!/bin/bash
-
-# Toggle the layout on the current active workspace between dwindle and scrolling
-
-ACTIVE_WORKSPACE=$(hyprctl activeworkspace -j | jq -r '.id')
-CURRENT_LAYOUT=$(hyprctl activeworkspace -j | jq -r '.tiledLayout')
-
-case "$CURRENT_LAYOUT" in
-  dwindle) NEW_LAYOUT=scrolling ;;
-  *) NEW_LAYOUT=dwindle ;;
-esac
-
-hyprctl keyword workspace $ACTIVE_WORKSPACE, layout:$NEW_LAYOUT
-notify-send -u low "󱂬    Workspace layout set to $NEW_LAYOUT"
@@ -0,0 +1,12 @@
+#!/bin/bash
+
+# Toggles the window gaps on the active workspace between no gaps and the default 10/5/2.
+
+workspace_id=$(hyprctl activeworkspace -j | jq -r .id)
+gaps=$(hyprctl workspacerules -j | jq -r ".[] | select(.workspaceString==\"$workspace_id\") | .gapsOut[0] // 0")
+
+if [[ $gaps == "0" ]]; then
+  hyprctl keyword "workspace $workspace_id, gapsout:10, gapsin:5, bordersize:2"
+else \
+  hyprctl keyword "workspace $workspace_id, gapsout:0, gapsin:0, bordersize:0"
+fi
@@ -2,16 +2,16 @@

 # Install one of the supported development environments. Usually called via Install > Development > * in the Omarchy Menu.

-if [[ -z $1 ]]; then
-  echo "Usage: omarchy-install-dev-env <ruby|node|bun|deno|go|laravel|symfony|php|python|elixir|phoenix|rust|java|zig|ocaml|dotnet|clojure|scala>" >&2
+if [[ -z "$1" ]]; then
+  echo "Usage: omarchy-install-dev-env <ruby|node|bun|go|laravel|symfony|php|python|elixir|phoenix|rust|java|ocaml|dotnet|clojure>" >&2
  exit 1
 fi

 install_php() {
-  omarchy-pkg-add php composer php-sqlite xdebug
+  sudo pacman -S php composer php-sqlite xdebug --noconfirm

  # Install Path for Composer
-  if [[ :$PATH: != *:$HOME/.config/composer/vendor/bin:* ]]; then
+  if [[ ":$PATH:" != *":$HOME/.config/composer/vendor/bin:"* ]]; then
    echo 'export PATH="$HOME/.config/composer/vendor/bin:$PATH"' >>"$HOME/.bashrc"
    source "$HOME/.bashrc"
    echo "Added Composer global bin directory to PATH."
@@ -50,10 +50,9 @@ case "$1" in
 ruby)
  echo -e "Installing Ruby on Rails...\n"
  omarchy-pkg-add libyaml
-  mise settings add ruby.compile false
-  mise settings add idiomatic_version_file_enable_tools ruby
  mise use --global ruby@latest
-  echo "gem: --no-document" >~/.gemrc
+  mise settings add idiomatic_version_file_enable_tools ruby
+  echo "gem: --no-document" > ~/.gemrc
  mise x ruby -- gem install rails --no-document
  echo -e "\nYou can now run: rails new myproject"
  ;;
@@ -142,10 +141,4 @@ clojure)
  omarchy-pkg-add rlwrap
  mise use --global clojure@latest
  ;;
-scala)
-  echo -e "Installing Scala...\n"
-  mise use --global java@latest
-  mise use --global scala@latest
-  mise use --global scala-cli@latest
-  ;;
 esac
@@ -5,13 +5,13 @@

 options=("MySQL" "PostgreSQL" "Redis" "MongoDB" "MariaDB" "MSSQL")

-if (( $# == 0 )); then
+if [[ "$#" -eq 0 ]]; then
  choices=$(printf "%s\n" "${options[@]}" | gum choose --header "Select database (return to install, esc to cancel)") || main_menu
 else
  choices="$@"
 fi

-if [[ -n $choices ]]; then
+if [[ -n "$choices" ]]; then
  for db in $choices; do
    case $db in
    MySQL) sudo docker run -d --restart unless-stopped -p "127.0.0.1:3306:3306" --name=mysql8 -e MYSQL_ROOT_PASSWORD= -e MYSQL_ALLOW_EMPTY_PASSWORD=true mysql:8.4 ;;
@@ -1,17 +0,0 @@
-#!/bin/bash
-
-# Install and launch Geforce Now.
-
-set -e
-
-omarchy-pkg-add flatpak
-cd /tmp
-
-# Download and run GeForce NOW
-curl -LO https://international.download.nvidia.com/GFNLinux/GeForceNOWSetup.bin
-chmod +x GeForceNOWSetup.bin
-./GeForceNOWSetup.bin
-
-# Ensure a separate browser process not started by GFN is available.
-# If not, it seems like GFN has a tendency to hang on login.
-setsid omarchy-launch-browser
@@ -1,17 +0,0 @@
-#!/bin/bash
-
-# Install the NordVPN service with optional GUI.
-
-echo "Installing NordVPN..."
-omarchy-pkg-aur-add nordvpn-bin
-
-echo "Enabling NordVPN daemon..."
-sudo systemctl enable --now nordvpnd
-
-echo "Adding user to nordvpn group..."
-sudo usermod -aG nordvpn "$USER"
-
-echo -e "\nNordVPN installed! After reboot, run 'nordvpn login' to authenticate."
-
-echo
-gum confirm "Reboot now to make NordVPN usable?" && omarchy-system-reboot
@@ -1,12 +0,0 @@
-#!/bin/bash
-
-# Install the ONCE service, enable its background service, and launch the TUI.
-
-echo "Installing ONCE..."
-omarchy-pkg-add once-bin
-
-echo "Enabling ONCE background service..."
-sudo systemctl enable --now once-background.service
-
-echo -e "\nLaunching ONCE..."
-once
@@ -1,10 +1,15 @@
 #!/bin/bash

-# Install the Tailscale mesh VPN service and a web app for the Tailscale Admin Console.
+# Install the Tailscale mesh VPN service, the tsui TUI management app, and a web app for the Tailscale Admin Console.

 curl -fsSL https://tailscale.com/install.sh | sh
+curl -fsSL https://neuralink.com/tsui/install.sh | bash

 echo -e "\nStarting Tailscale..."
 sudo tailscale up --accept-routes

-omarchy-webapp-install "Tailscale" "https://login.tailscale.com/admin/machines" https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png
+echo -e "\nAdd tsui to sudoers..."
+echo "$USER ALL=(ALL) NOPASSWD: $(which tsui)" | sudo tee /etc/sudoers.d/tsui
+
+omarchy-tui-install "Tailscale" "sudo tsui" float https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png
+omarchy-webapp-install "Tailscale Admin Console" "https://login.tailscale.com/admin/machines" https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png
@@ -25,11 +25,33 @@ if omarchy-pkg-add $package; then
  # Copy custom desktop entry for alacritty with X-TerminalArg* keys
  if [[ $package == "alacritty" ]]; then
    mkdir -p ~/.local/share/applications
-    cp $OMARCHY_PATH/applications/Alacritty.desktop ~/.local/share/applications/
+    cat > ~/.local/share/applications/Alacritty.desktop << EOF
+[Desktop Entry]
+Type=Application
+TryExec=alacritty
+Exec=alacritty
+Icon=Alacritty
+Terminal=false
+Categories=System;TerminalEmulator;
+Name=Alacritty
+GenericName=Terminal
+Comment=A fast, cross-platform, OpenGL terminal emulator
+StartupNotify=true
+StartupWMClass=Alacritty
+Actions=New;
+X-TerminalArgExec=-e
+X-TerminalArgAppId=--class=
+X-TerminalArgTitle=--title=
+X-TerminalArgDir=--working-directory=
+
+[Desktop Action New]
+Name=New Terminal
+Exec=alacritty
+EOF
  fi

  # Update xdg-terminals.list to prioritize the proper terminal
-  cat >~/.config/xdg-terminals.list <<EOF
+  cat > ~/.config/xdg-terminals.list << EOF
 # Terminal emulator preference order for xdg-terminal-exec
 # The first found and valid terminal will be used
 $desktop_id
@@ -5,8 +5,8 @@
 set -e

 # Install xpadneo to ensure controllers work out of the box
-omarchy-pkg-add linux-headers
-omarchy-pkg-aur-add xpadneo-dkms
+sudo pacman -S --noconfirm --needed linux-headers
+yay -S --noconfirm xpadneo-dkms

 # Prevent xpad/xpadneo driver conflict
 echo blacklist xpad | sudo tee /etc/modprobe.d/blacklist-xpad.conf >/dev/null
@@ -6,7 +6,7 @@
 default_browser=$(xdg-settings get default-web-browser)
 browser_exec=$(sed -n 's/^Exec=\([^ ]*\).*/\1/p' {~/.local,~/.nix-profile,/usr}/share/applications/$default_browser 2>/dev/null | head -1)

-if $browser_exec --help | grep -q MOZ_LOG; then
+if [[ $browser_exec =~ (firefox|zen|librewolf|mullvad) ]]; then
  private_flag="--private-window"
 elif [[ $browser_exec =~ edge ]]; then
  private_flag="--inprivate"
@@ -4,4 +4,4 @@
 # Used by actions such as Update System.

 cmd="$*"
-exec setsid uwsm-app -- xdg-terminal-exec --app-id=org.omarchy.terminal --title=Omarchy -e bash -c "omarchy-show-logo; $cmd; if (( \$? != 130 )); then omarchy-show-done; fi"
+exec setsid uwsm-app -- xdg-terminal-exec --app-id=org.omarchy.terminal --title=Omarchy -e bash -c "omarchy-show-logo; $cmd; if [ \$? -ne 130 ]; then omarchy-show-done; fi"
@@ -11,14 +11,14 @@ fi
 pgrep -f org.omarchy.screensaver && exit 0

 # Allow screensaver to be turned off but also force started
-if omarchy-toggle-enabled screensaver-off && [[ $1 != "force" ]]; then
+if [[ -f ~/.local/state/omarchy/toggles/screensaver-off ]] && [[ $1 != "force" ]]; then
  exit 1
 fi

 # Silently quit Walker on overlay
 walker -q

-focused=$(omarchy-hyprland-monitor-focused)
+focused=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')
 terminal=$(xdg-terminal-exec --print-id)

 for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
@@ -46,7 +46,7 @@ for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
      -e omarchy-cmd-screensaver
    ;;
  *)
-    notify-send -u low "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
+    notify-send "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
    ;;
  esac
 done
@@ -1,6 +1,6 @@
 #!/bin/bash

-# Launch the Walker application launcher while ensuring that it's data provider (called elephant) is running first.
+# Launch the Walker application launcher while ensuring that it's data provider (called elephant) is runnig first.

 # Ensure elephant is running before launching walker
 if ! pgrep -x elephant > /dev/null; then
@@ -9,7 +9,7 @@ fi

 # Ensure walker service is running
 if ! pgrep -f "walker --gapplication-service" > /dev/null; then
-  setsid uwsm-app -- env GSK_RENDERER=cairo walker --gapplication-service &
+  setsid uwsm-app -- walker --gapplication-service &
 fi

 exec walker --width 644 --maxheight 300 --minheight 300 "$@"
@@ -5,7 +5,7 @@
 browser=$(xdg-settings get default-web-browser)

 case $browser in
-google-chrome* | brave* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
+google-chrome* | brave-browser* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
 *) browser="chromium.desktop" ;;
 esac

@@ -10,22 +10,15 @@ BACK_TO_EXIT=false
 back_to() {
  local parent_menu="$1"

-  if [[ $BACK_TO_EXIT == "true" ]]; then
+  if [[ "$BACK_TO_EXIT" == "true" ]]; then
    exit 0
-  elif [[ -n $parent_menu ]]; then
+  elif [[ -n "$parent_menu" ]]; then
    "$parent_menu"
  else
    show_main_menu
  fi
 }

-toggle_existing_menu() {
-  if pgrep -f "walker.*--dmenu" >/dev/null; then
-    walker --close >/dev/null 2>&1
-    exit 0
-  fi
-}
-
 menu() {
  local prompt="$1"
  local options="$2"
@@ -34,10 +27,10 @@ menu() {

  read -r -a args <<<"$extra"

-  if [[ -n $preselect ]]; then
+  if [[ -n "$preselect" ]]; then
    local index
    index=$(echo -e "$options" | grep -nxF "$preselect" | cut -d: -f1)
-    if [[ -n $index ]]; then
+    if [[ -n "$index" ]]; then
      args+=("-c" "$index")
    fi
  fi
@@ -54,20 +47,20 @@ present_terminal() {
 }

 open_in_editor() {
-  notify-send -u low "Editing config file" "$1"
+  notify-send "Editing config file" "$1"
  omarchy-launch-editor "$1"
 }

 install() {
-  present_terminal "echo 'Installing $1...'; omarchy-pkg-add $2"
+  present_terminal "echo 'Installing $1...'; sudo pacman -S --noconfirm $2"
 }

 install_and_launch() {
-  present_terminal "echo 'Installing $1...'; omarchy-pkg-add $2 && setsid gtk-launch $3"
+  present_terminal "echo 'Installing $1...'; sudo pacman -S --noconfirm $2 && setsid gtk-launch $3"
 }

 install_font() {
-  present_terminal "echo 'Installing $1...'; omarchy-pkg-add $2 && sleep 2 && omarchy-font-set '$3'"
+  present_terminal "echo 'Installing $1...'; sudo pacman -S --noconfirm --needed $2 && sleep 2 && omarchy-font-set '$3'"
 }

 install_terminal() {
@@ -75,11 +68,11 @@ install_terminal() {
 }

 aur_install() {
-  present_terminal "echo 'Installing $1 from AUR...'; omarchy-pkg-aur-add $2"
+  present_terminal "echo 'Installing $1 from AUR...'; yay -S --noconfirm $2"
 }

 aur_install_and_launch() {
-  present_terminal "echo 'Installing $1 from AUR...'; omarchy-pkg-aur-add $2 && setsid gtk-launch $3"
+  present_terminal "echo 'Installing $1 from AUR...'; yay -S --noconfirm $2 && setsid gtk-launch $3"
 }

 show_learn_menu() {
@@ -95,65 +88,39 @@ show_learn_menu() {
 }

 show_trigger_menu() {
-  case $(menu "Trigger" "  Capture\n  Share\n󰔎  Toggle\n  Hardware") in
+  case $(menu "Trigger" "  Capture\n  Share\n󰔎  Toggle\n  Tweaks") in
  *Capture*) show_capture_menu ;;
  *Share*) show_share_menu ;;
  *Toggle*) show_toggle_menu ;;
-  *Hardware*) show_hardware_menu ;;
+  *Tweaks*) show_tweaks_menu ;;
  *) show_main_menu ;;
  esac
 }

 show_capture_menu() {
  case $(menu "Capture" "  Screenshot\n  Screenrecord\n󰃉  Color") in
-  *Screenshot*) omarchy-cmd-screenshot ;;
+  *Screenshot*) show_screenshot_menu ;;
  *Screenrecord*) show_screenrecord_menu ;;
  *Color*) pkill hyprpicker || hyprpicker -a ;;
-  *) back_to show_trigger_menu ;;
+  *) show_trigger_menu ;;
  esac
 }

-get_webcam_list() {
-  v4l2-ctl --list-devices 2>/dev/null | while IFS= read -r line; do
-    if [[ $line != $'\t'* && -n $line ]]; then
-      local name="$line"
-      IFS= read -r device || break
-      device=$(echo "$device" | tr -d '\t' | head -1)
-      [[ -n $device ]] && echo "$device  $name"
-    fi
-  done
-}
-
-show_webcam_select_menu() {
-  local devices=$(get_webcam_list)
-  local count=$(echo "$devices" | grep -c . 2>/dev/null || echo 0)
-
-  if [[ -z $devices ]] || ((count == 0)); then
-    notify-send "No webcam devices found" -u critical -t 3000
-    return 1
-  fi
-
-  if ((count == 1)); then
-    echo "$devices" | awk '{print $1}'
-  else
-    menu "Select Webcam" "$devices" | awk '{print $1}'
-  fi
+show_screenshot_menu() {
+  case $(menu "Screenshot" "  Snap with Editing\n  Straight to Clipboard") in
+  *Editing*) omarchy-cmd-screenshot smart ;;
+  *Clipboard*) omarchy-cmd-screenshot smart clipboard ;;
+  *) show_capture_menu ;;
+  esac
 }

 show_screenrecord_menu() {
  omarchy-cmd-screenrecord --stop-recording && exit 0

-  case $(menu "Screenrecord" "  With no audio\n  With desktop audio\n  With desktop + microphone audio\n  With desktop + microphone audio + webcam") in
-  *"With no audio") omarchy-cmd-screenrecord ;;
+  case $(menu "Screenrecord" "  With desktop audio\n  With desktop + microphone audio\n  With desktop + microphone audio + webcam") in
  *"With desktop audio") omarchy-cmd-screenrecord --with-desktop-audio ;;
  *"With desktop + microphone audio") omarchy-cmd-screenrecord --with-desktop-audio --with-microphone-audio ;;
-  *"With desktop + microphone audio + webcam")
-    local device=$(show_webcam_select_menu) || {
-      back_to show_capture_menu
-      return
-    }
-    omarchy-cmd-screenrecord --with-desktop-audio --with-microphone-audio --with-webcam --webcam-device="$device"
-    ;;
+  *"With desktop + microphone audio + webcam") omarchy-cmd-screenrecord --with-desktop-audio --with-microphone-audio --with-webcam ;;
  *) back_to show_capture_menu ;;
  esac
 }
@@ -168,24 +135,18 @@ show_share_menu() {
 }

 show_toggle_menu() {
-  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Monitor Scaling\n󰛧  Laptop Display") in
-
+  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar") in
  *Screensaver*) omarchy-toggle-screensaver ;;
  *Nightlight*) omarchy-toggle-nightlight ;;
  *Idle*) omarchy-toggle-idle ;;
  *Bar*) omarchy-toggle-waybar ;;
-  *Layout*) omarchy-hyprland-workspace-layout-toggle ;;
-  *Ratio*) omarchy-hyprland-window-single-square-aspect-toggle ;;
-  *Gaps*) omarchy-hyprland-window-gaps-toggle ;;
-  *Scaling*) omarchy-hyprland-monitor-scaling-cycle ;;
-  *Laptop*) omarchy-hyprland-monitor-internal-toggle ;;
-  *) back_to show_trigger_menu ;;
+  *) show_trigger_menu ;;
  esac
 }

-show_hardware_menu() {
-  case $(menu "Toggle" "  Hybrid GPU") in
-  *"Hybrid GPU"*) present_terminal omarchy-toggle-hybrid-gpu ;;
+show_tweaks_menu() {
+  case $(menu "Tweaks" "  Toggle Hybrid GPU") in
+  *"Toggle Hybrid GPU"*) present_terminal omarchy-toggle-hybrid-gpu ;;
  *) show_trigger_menu ;;
  esac
 }
@@ -194,7 +155,7 @@ show_style_menu() {
  case $(menu "Style" "󰸌  Theme\n  Font\n  Background\n  Hyprland\n󱄄  Screensaver\n  About") in
  *Theme*) show_theme_menu ;;
  *Font*) show_font_menu ;;
-  *Background*) show_background_menu ;;
+  *Background*) omarchy-theme-bg-next ;;
  *Hyprland*) open_in_editor ~/.config/hypr/looknfeel.conf ;;
  *Screensaver*) open_in_editor ~/.config/omarchy/branding/screensaver.txt ;;
  *About*) open_in_editor ~/.config/omarchy/branding/about.txt ;;
@@ -206,13 +167,9 @@ show_theme_menu() {
  omarchy-launch-walker -m menus:omarchythemes --width 800 --minheight 400
 }

-show_background_menu() {
-  omarchy-launch-walker -m menus:omarchyBackgroundSelector --width 800 --minheight 400
-}
-
 show_font_menu() {
  theme=$(menu "Font" "$(omarchy-font-list)" "--width 350" "$(omarchy-font-current)")
-  if [[ $theme == "CNCLD" || -z $theme ]]; then
+  if [[ "$theme" == "CNCLD" || -z "$theme" ]]; then
    back_to show_style_menu
  else
    omarchy-font-set "$theme"
@@ -221,8 +178,8 @@ show_font_menu() {

 show_setup_menu() {
  local options="  Audio\n  Wifi\n󰂯  Bluetooth\n󱐋  Power Profile\n  System Sleep\n󰍹  Monitors"
-  [[ -f ~/.config/hypr/bindings.conf ]] && options="$options\n  Keybindings"
-  [[ -f ~/.config/hypr/input.conf ]] && options="$options\n  Input"
+  [ -f ~/.config/hypr/bindings.conf ] && options="$options\n  Keybindings"
+  [ -f ~/.config/hypr/input.conf ] && options="$options\n  Input"
  options="$options\n󰱔  DNS\n  Security\n  Config"

  case $(menu "Setup" "$options") in
@@ -244,7 +201,7 @@ show_setup_menu() {
 show_setup_power_menu() {
  profile=$(menu "Power Profile" "$(omarchy-powerprofiles-list)" "" "$(powerprofilesctl get)")

-  if [[ $profile == "CNCLD" || -z $profile ]]; then
+  if [[ "$profile" == "CNCLD" || -z "$profile" ]]; then
    back_to show_setup_menu
  else
    powerprofilesctl set "$profile"
@@ -277,10 +234,10 @@ show_setup_config_menu() {
 show_setup_system_menu() {
  local options=""

-  if omarchy-toggle-enabled suspend-off; then
-    options="$options󰒲  Enable Suspend"
-  else
+  if [ -f ~/.local/state/omarchy/toggles/suspend-on ]; then
    options="$options󰒲  Disable Suspend"
+  else
+    options="$options󰒲  Enable Suspend"
  fi

  if omarchy-hibernation-available; then
@@ -316,11 +273,9 @@ show_install_menu() {
 }

 show_install_service_menu() {
-  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN [AUR]\n󰏖  ONCE\n󰟵  Bitwarden\n  Chromium Account") in
+  case $(menu "Install" "  Dropbox\n  Tailscale\n󰟵  Bitwarden\n  Chromium Account") in
  *Dropbox*) present_terminal omarchy-install-dropbox ;;
  *Tailscale*) present_terminal omarchy-install-tailscale ;;
-  *NordVPN*) present_terminal omarchy-install-nordvpn ;;
-  *ONCE*) present_terminal omarchy-install-once ;;
  *Bitwarden*) install_and_launch "Bitwarden" "bitwarden bitwarden-cli" "bitwarden" ;;
  *Chromium*) present_terminal omarchy-install-chromium-google-account ;;
  *) show_install_menu ;;
@@ -331,7 +286,7 @@ show_install_editor_menu() {
  case $(menu "Install" "  VSCode\n  Cursor\n  Zed\n  Sublime Text\n  Helix\n  Emacs") in
  *VSCode*) present_terminal omarchy-install-vscode ;;
  *Cursor*) install_and_launch "Cursor" "cursor-bin" "cursor" ;;
-  *Zed*) install_and_launch "Zed" "zed" "dev.zed.Zed" ;;
+  *Zed*) present_terminal "echo 'Installing Zed...'; sudo pacman -S zed && setsid gtk-launch dev.zed.Zed" ;;
  *Sublime*) install_and_launch "Sublime Text" "sublime-text-4" "sublime_text" ;;
  *Helix*) install "Helix" "helix" ;;
  *Emacs*) install "Emacs" "emacs-wayland" && systemctl --user enable --now emacs.service ;;
@@ -355,9 +310,14 @@ show_install_ai_menu() {
      echo ollama
  )

-  case $(menu "Install" "  Dictation\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
+  case $(menu "Install" "  Dictation\n󱚤  Claude Code\n󱚤  Copilot CLI\n󱚤  Cursor CLI\n󱚤  Gemini\n󱚤  OpenAI Codex\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
  *Dictation*) present_terminal omarchy-voxtype-install ;;
-  *Studio*) install "LM Studio" "lmstudio-bin" ;;
+  *Claude*) install "Claude Code" "claude-code" ;;
+  *Copilot*) install "Copilot CLI" "github-copilot-cli" ;;
+  *Cursor*) install "Cursor CLI" "cursor-cli" ;;
+  *Gemini*) install "Gemini" "gemini-cli" ;;
+  *OpenAI*) install "OpenAI Codex" "openai-codex" ;;
+  *Studio*) install "LM Studio" "lmstudio" ;;
  *Ollama*) install "Ollama" $ollama_pkg ;;
  *Crush*) install "Crush" "crush-bin" ;;
  *) show_install_menu ;;
@@ -365,9 +325,8 @@ show_install_ai_menu() {
 }

 show_install_gaming_menu() {
-  case $(menu "Install" "  Steam\n󰢹  NVIDIA GeForce NOW\n  RetroArch [AUR]\n󰍳  Minecraft\n󰖺  Xbox Controller [AUR]") in
+  case $(menu "Install" "  Steam\n  RetroArch [AUR]\n󰍳  Minecraft\n󰖺  Xbox Controller [AUR]") in
  *Steam*) present_terminal omarchy-install-steam ;;
-  *GeForce*) present_terminal omarchy-install-geforce-now ;;
  *RetroArch*) aur_install_and_launch "RetroArch" "retroarch retroarch-assets libretro libretro-fbneo" "com.libretro.RetroArch.desktop" ;;
  *Minecraft*) install_and_launch "Minecraft" "minecraft-launcher" "minecraft-launcher" ;;
  *Xbox*) present_terminal omarchy-install-xbox-controllers ;;
@@ -385,8 +344,7 @@ show_install_style_menu() {
 }

 show_install_font_menu() {
-  case $(menu "Install" "  Cascadia Mono\n  Meslo LG Mono\n  Fira Code\n  Victor Code\n  Bistream Vera Mono\n  Iosevka" "--width 350") in
-  *Cascadia*) install_font "Cascadia Mono" "ttf-cascadia-mono-nerd" "CaskaydiaMono Nerd Font" ;;
+  case $(menu "Install" "  Meslo LG Mono\n  Fira Code\n  Victor Code\n  Bistream Vera Mono\n  Iosevka" "--width 350") in
  *Meslo*) install_font "Meslo LG Mono" "ttf-meslo-nerd" "MesloLGL Nerd Font" ;;
  *Fira*) install_font "Fira Code" "ttf-firacode-nerd" "FiraCode Nerd Font" ;;
  *Victor*) install_font "Victor Code" "ttf-victor-mono-nerd" "VictorMono Nerd Font" ;;
@@ -397,7 +355,7 @@ show_install_font_menu() {
 }

 show_install_development_menu() {
-  case $(menu "Install" "󰫏  Ruby on Rails\n  Docker DB\n  JavaScript\n  Go\n  PHP\n  Python\n  Elixir\n  Zig\n  Rust\n  Java\n  .NET\n  OCaml\n  Clojure\n  Scala") in
+  case $(menu "Install" "󰫏  Ruby on Rails\n  Docker DB\n  JavaScript\n  Go\n  PHP\n  Python\n  Elixir\n  Zig\n  Rust\n  Java\n  .NET\n  OCaml\n  Clojure") in
  *Rails*) present_terminal "omarchy-install-dev-env ruby" ;;
  *Docker*) present_terminal omarchy-install-docker-dbs ;;
  *JavaScript*) show_install_javascript_menu ;;
@@ -411,7 +369,6 @@ show_install_development_menu() {
  *NET*) present_terminal "omarchy-install-dev-env dotnet" ;;
  *OCaml*) present_terminal "omarchy-install-dev-env ocaml" ;;
  *Clojure*) present_terminal "omarchy-install-dev-env clojure" ;;
-  *Scala*) present_terminal "omarchy-install-dev-env scala" ;;
  *) show_install_menu ;;
  esac
 }
@@ -443,12 +400,11 @@ show_install_elixir_menu() {
 }

 show_remove_menu() {
-  case $(menu "Remove" "󰣇  Package\n  Web App\n  TUI\n󰵮  Development\n󰏓  Preinstalls\n  Dictation\n󰸌  Theme\n󰍲  Windows\n󰈷  Fingerprint\n  Fido2") in
+  case $(menu "Remove" "󰣇  Package\n  Web App\n  TUI\n󰵮  Development\n  Dictation\n󰸌  Theme\n󰍲  Windows\n󰈷  Fingerprint\n  Fido2") in
  *Package*) terminal omarchy-pkg-remove ;;
  *Web*) present_terminal omarchy-webapp-remove ;;
  *TUI*) present_terminal omarchy-tui-remove ;;
  *Development*) show_remove_development_menu ;;
-  *Preinstalls*) present_terminal omarchy-remove-preinstalls ;;
  *Dictation*) present_terminal omarchy-voxtype-remove ;;
  *Theme*) present_terminal omarchy-theme-remove ;;
  *Windows*) present_terminal "omarchy-windows-vm remove" ;;
@@ -459,7 +415,7 @@ show_remove_menu() {
 }

 show_remove_development_menu() {
-  case $(menu "Remove" "󰫏  Ruby on Rails\n  JavaScript\n  Go\n  PHP\n  Python\n  Elixir\n  Zig\n  Rust\n  Java\n  .NET\n  OCaml\n  Clojure\n  Scala") in
+  case $(menu "Remove" "󰫏  Ruby on Rails\n  JavaScript\n  Go\n  PHP\n  Python\n  Elixir\n  Zig\n  Rust\n  Java\n  .NET\n  OCaml\n  Clojure") in
  *Rails*) present_terminal "omarchy-remove-dev-env ruby" ;;
  *JavaScript*) show_remove_javascript_menu ;;
  *Go*) present_terminal "omarchy-remove-dev-env go" ;;
@@ -472,13 +428,12 @@ show_remove_development_menu() {
  *NET*) present_terminal "omarchy-remove-dev-env dotnet" ;;
  *OCaml*) present_terminal "omarchy-remove-dev-env ocaml" ;;
  *Clojure*) present_terminal "omarchy-remove-dev-env clojure" ;;
-  *Scala*) present_terminal "omarchy-remove-dev-env scala" ;;
  *) show_remove_menu ;;
  esac
 }

 show_remove_javascript_menu() {
-  case $(menu "Remove" "  Node.js\n  Bun\n  Deno") in
+  case $(menu "Remove" "  Node.js\n  Bun\n  Deno") in
  *Node*) present_terminal "omarchy-remove-dev-env node" ;;
  *Bun*) present_terminal "omarchy-remove-dev-env bun" ;;
  *Deno*) present_terminal "omarchy-remove-dev-env deno" ;;
@@ -487,7 +442,7 @@ show_remove_javascript_menu() {
 }

 show_remove_php_menu() {
-  case $(menu "Remove" "  PHP\n  Laravel\n  Symfony") in
+  case $(menu "Remove" "  PHP\n  Laravel\n  Symfony") in
  *PHP*) present_terminal "omarchy-remove-dev-env php" ;;
  *Laravel*) present_terminal "omarchy-remove-dev-env laravel" ;;
  *Symfony*) present_terminal "omarchy-remove-dev-env symfony" ;;
@@ -496,7 +451,7 @@ show_remove_php_menu() {
 }

 show_remove_elixir_menu() {
-  case $(menu "Remove" "  Elixir\n  Phoenix") in
+  case $(menu "Remove" "  Elixir\n  Phoenix") in
  *Elixir*) present_terminal "omarchy-remove-dev-env elixir" ;;
  *Phoenix*) present_terminal "omarchy-remove-dev-env phoenix" ;;
  *) show_remove_development_menu ;;
@@ -504,7 +459,7 @@ show_remove_elixir_menu() {
 }

 show_update_menu() {
-  case $(menu "Update" "  Omarchy\n󰔫  Channel\n  Config\n󰸌  Extra Themes\n  Process\n󰇅  Hardware\n  Firmware\n  Password\n  Timezone\n  Time") in
+  case $(menu "Update" " Omarchy\n󰔫  Channel\n  Config\n󰸌  Extra Themes\n  Process\n󰇅  Hardware\n  Firmware\n  Password\n  Timezone\n  Time") in
  *Omarchy*) present_terminal omarchy-update ;;
  *Channel*) show_update_channel_menu ;;
  *Config*) show_update_config_menu ;;
@@ -520,19 +475,17 @@ show_update_menu() {
 }

 show_update_channel_menu() {
-  case $(menu "Update channel" "🟢 Stable\n🟡 RC\n🟠 Edge\n🔴 Dev") in
+  case $(menu "Update channel" "🟢 Stable\n🟡 Edge\n🔴 Dev") in
  *Stable*) present_terminal "omarchy-channel-set stable" ;;
-  *RC*) present_terminal "omarchy-channel-set rc" ;;
  *Edge*) present_terminal "omarchy-channel-set edge" ;;
  *Dev*) present_terminal "omarchy-channel-set dev" ;;
  *) show_update_menu ;;
  esac
 }
 show_update_process_menu() {
-  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n󰎟  Mako\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
+  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
  *Hypridle*) omarchy-restart-hypridle ;;
  *Hyprsunset*) omarchy-restart-hyprsunset ;;
-  *Mako*) omarchy-restart-mako ;;
  *Swayosd*) omarchy-restart-swayosd ;;
  *Walker*) omarchy-restart-walker ;;
  *Waybar*) omarchy-restart-waybar ;;
@@ -541,14 +494,13 @@ show_update_process_menu() {
 }

 show_update_config_menu() {
-  case $(menu "Use default config" "  Hyprland\n  Hypridle\n  Hyprlock\n  Hyprsunset\n󱣴  Plymouth\n  Swayosd\n  Tmux\n󰌧  Walker\n󰍜  Waybar") in
+  case $(menu "Use default config" "  Hyprland\n  Hypridle\n  Hyprlock\n  Hyprsunset\n󱣴  Plymouth\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
  *Hyprland*) present_terminal omarchy-refresh-hyprland ;;
  *Hypridle*) present_terminal omarchy-refresh-hypridle ;;
  *Hyprlock*) present_terminal omarchy-refresh-hyprlock ;;
  *Hyprsunset*) present_terminal omarchy-refresh-hyprsunset ;;
  *Plymouth*) present_terminal omarchy-refresh-plymouth ;;
  *Swayosd*) present_terminal omarchy-refresh-swayosd ;;
-  *Tmux*) present_terminal omarchy-refresh-tmux ;;
  *Walker*) present_terminal omarchy-refresh-walker ;;
  *Waybar*) present_terminal omarchy-refresh-waybar ;;
  *) show_update_menu ;;
@@ -556,11 +508,10 @@ show_update_config_menu() {
 }

 show_update_hardware_menu() {
-  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth\n󰟸  Trackpad") in
+  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth") in
  *Audio*) present_terminal omarchy-restart-pipewire ;;
  *Wi-Fi*) present_terminal omarchy-restart-wifi ;;
  *Bluetooth*) present_terminal omarchy-restart-bluetooth ;;
-  *Trackpad*) present_terminal omarchy-restart-trackpad ;;
  *) show_update_menu ;;
  esac
 }
@@ -573,24 +524,19 @@ show_update_password_menu() {
  esac
 }

-show_about() {
-  omarchy-launch-about
-}
-
 show_system_menu() {
-  local options="󱄄  Screensaver\n  Lock"
-  ! omarchy-toggle-enabled suspend-off && options="$options\n󰒲  Suspend"
+  local options="  Lock\n󱄄  Screensaver"
+  [ -f ~/.local/state/omarchy/toggles/suspend-on ] && options="$options\n󰒲  Suspend"
  omarchy-hibernation-available && options="$options\n󰤁  Hibernate"
-  options="$options\n󰍃  Logout\n󰜉  Restart\n󰐥  Shutdown"
+  options="$options\n󰜉  Restart\n󰐥  Shutdown"

  case $(menu "System" "$options") in
-  *Screensaver*) omarchy-launch-screensaver force ;;
  *Lock*) omarchy-lock-screen ;;
+  *Screensaver*) omarchy-launch-screensaver force ;;
  *Suspend*) systemctl suspend ;;
  *Hibernate*) systemctl hibernate ;;
-  *Logout*) omarchy-system-logout ;;
-  *Restart*) omarchy-system-reboot ;;
-  *Shutdown*) omarchy-system-shutdown ;;
+  *Restart*) omarchy-cmd-reboot ;;
+  *Shutdown*) omarchy-cmd-shutdown ;;
  *) back_to show_main_menu ;;
  esac
 }
@@ -604,19 +550,18 @@ go_to_menu() {
  *apps*) walker -p "Launch…" ;;
  *learn*) show_learn_menu ;;
  *trigger*) show_trigger_menu ;;
-  *toggle*) show_toggle_menu ;;
  *share*) show_share_menu ;;
-  *background*) show_background_menu ;;
  *capture*) show_capture_menu ;;
  *style*) show_style_menu ;;
  *theme*) show_theme_menu ;;
+  *screenshot*) show_screenshot_menu ;;
  *screenrecord*) show_screenrecord_menu ;;
  *setup*) show_setup_menu ;;
  *power*) show_setup_power_menu ;;
  *install*) show_install_menu ;;
  *remove*) show_remove_menu ;;
  *update*) show_update_menu ;;
-  *about*) show_about ;;
+  *about*) omarchy-launch-about ;;
  *system*) show_system_menu ;;
  esac
 }
@@ -625,9 +570,7 @@ go_to_menu() {
 USER_EXTENSIONS="$HOME/.config/omarchy/extensions/menu.sh"
 [[ -f $USER_EXTENSIONS ]] && source "$USER_EXTENSIONS"

-toggle_existing_menu
-
-if [[ -n $1 ]]; then
+if [[ -n "$1" ]]; then
  BACK_TO_EXIT=true
  go_to_menu "$1"
 else
@@ -12,7 +12,7 @@ build_keymap_cache() {
  }

  while IFS=, read -r code sym; do
-    [[ -z $code || -z $sym ]] && continue
+    [[ -z "$code" || -z "$sym" ]] && continue
    KEYCODE_SYM_MAP["$code"]="$sym"
  done < <(
    awk '
@@ -42,17 +42,13 @@ lookup_keycode_cached() {

 parse_keycodes() {
  local start end elapsed
-  [[ ${DEBUG:-0} == "1" ]] && start=$(date +%s.%N)
+  [[ "${DEBUG:-0}" == "1" ]] && start=$(date +%s.%N)
  while IFS= read -r line; do
-    if [[ $line =~ code:([0-9]+) ]]; then
+    if [[ "$line" =~ code:([0-9]+) ]]; then
      code="${BASH_REMATCH[1]}"
-      if [[ $code == "201" ]]; then
-        echo "${line/SUPER SHIFT,code:201/,COPILOT KEY}"
-      else
-        symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
-        echo "${line/code:${code}/$symbol}"
-      fi
-    elif [[ $line =~ mouse:([0-9]+) ]]; then
+      symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
+      echo "${line/code:${code}/$symbol}"
+    elif [[ "$line" =~ mouse:([0-9]+) ]]; then
      code="${BASH_REMATCH[1]}"

      case "$code" in
@@ -68,7 +64,7 @@ parse_keycodes() {
    fi
  done

-  if [[ $DEBUG == "1" ]]; then
+  if [[ "$DEBUG" == "1" ]]; then
    end=$(date +%s.%N)
    # fall back to awk if bc is missing
    if command -v bc >/dev/null 2>&1; then
@@ -172,47 +168,44 @@ prioritize_entries() {
    line = $0
    prio = 50
    if (match(line, /Terminal/)) prio = 0
-    if (match(line, /Tmux/)) prio = 1
-    if (match(line, /Browser/) && !match(line, /Browser[[:space:]]*\(/) && !match(line, /SUPER SHIFT.*\+.*B.*→.*Browser/)) prio = 2
-    if (match(line, /File manager/) && !match(line, /File manager \(cwd\)/))  prio = 3
-    if (match(line, /Launch apps/))  prio = 4
-    if (match(line, /Omarchy menu/))  prio = 5
-    if (match(line, /System menu/))  prio = 6
-    if (match(line, /Theme menu/))  prio = 7
-    if (match(line, /Full screen/))  prio = 8
-    if (match(line, /Full width/))  prio = 9
-    if (match(line, /Close window/))  prio = 10
-    if (match(line, /Close all windows/))  prio = 11
-    if (match(line, /Lock system/))  prio = 12
-    if (match(line, /Toggle window floating/))  prio = 13
-    if (match(line, /Toggle window split/))  prio = 14
-    if (match(line, /Pop window/))  prio = 15
-    if (match(line, /Universal/))  prio = 16
-    if (match(line, /Clipboard/))  prio = 17
-    if (match(line, /Audio controls/))  prio = 18
-    if (match(line, /Bluetooth controls/))  prio = 19
-    if (match(line, /Wifi controls/))  prio = 20
-    if (match(line, /Emoji picker/))  prio = 21
-    if (match(line, /Color picker/))  prio = 22
-    if (match(line, /Screenshot/))  prio = 23
-    if (match(line, /Screenrecording/))  prio = 24
-    if (match(line, /SUPER SHIFT.*\+.*B.*→.*Browser/)) prio = 25
-    if (match(line, /File manager \(cwd\)/))  prio = 26
-    if (match(line, /(Switch|Next|Former|Previous).*workspace/))  prio = 27
-    if (match(line, /Move window to workspace/))  prio = 28
-    if (match(line, /Move window silently to workspace/))  prio = 29
-    if (match(line, /Swap window/))  prio = 30
-    if (match(line, /Move window focus/))  prio = 31
-    if (match(line, /Move window$/))  prio = 32
-    if (match(line, /Resize window/))  prio = 33
-    if (match(line, /Expand window/))  prio = 34
-    if (match(line, /Shrink window/))  prio = 35
-    if (match(line, /scratchpad/))  prio = 36
-    if (match(line, /notification/))  prio = 37
-    if (match(line, /Toggle window transparency/))  prio = 38
-    if (match(line, /Toggle workspace gaps/))  prio = 39
-    if (match(line, /Toggle nightlight/))  prio = 40
-    if (match(line, /Toggle locking/))  prio = 41
+    if (match(line, /Browser/) && !match(line, /Browser[[:space:]]*\(/)) prio = 1
+    if (match(line, /File manager/))  prio = 2
+    if (match(line, /Launch apps/))  prio = 3
+    if (match(line, /Omarchy menu/))  prio = 4
+    if (match(line, /System menu/))  prio = 5
+    if (match(line, /Theme menu/))  prio = 6
+    if (match(line, /Full screen/))  prio = 7
+    if (match(line, /Full width/))  prio = 8
+    if (match(line, /Close window/))  prio = 9
+    if (match(line, /Close all windows/))  prio = 10
+    if (match(line, /Lock system/))  prio = 11
+    if (match(line, /Toggle window floating/))  prio = 12
+    if (match(line, /Toggle window split/))  prio = 13
+    if (match(line, /Pop window/))  prio = 14
+    if (match(line, /Universal/))  prio = 15
+    if (match(line, /Clipboard/))  prio = 16
+    if (match(line, /Audio controls/))  prio = 17
+    if (match(line, /Bluetooth controls/))  prio = 18
+    if (match(line, /Wifi controls/))  prio = 19
+    if (match(line, /Emoji picker/))  prio = 20
+    if (match(line, /Color picker/))  prio = 21
+    if (match(line, /Screenshot/))  prio = 22
+    if (match(line, /Screenrecording/))  prio = 23
+    if (match(line, /(Switch|Next|Former|Previous).*workspace/))  prio = 24
+    if (match(line, /Move window to workspace/))  prio = 25
+    if (match(line, /Move window silently to workspace/))  prio = 26
+    if (match(line, /Swap window/))  prio = 27
+    if (match(line, /Move window focus/))  prio = 28
+    if (match(line, /Move window$/))  prio = 29
+    if (match(line, /Resize window/))  prio = 30
+    if (match(line, /Expand window/))  prio = 31
+    if (match(line, /Shrink window/))  prio = 32
+    if (match(line, /scratchpad/))  prio = 33
+    if (match(line, /notification/))  prio = 34
+    if (match(line, /Toggle window transparency/))  prio = 35
+    if (match(line, /Toggle workspace gaps/))  prio = 36
+    if (match(line, /Toggle nightlight/))  prio = 37
+    if (match(line, /Toggle locking/))  prio = 38
    if (match(line, /group/))  prio = 94
    if (match(line, /Scroll active workspace/))  prio = 95
    if (match(line, /Cycle to/))  prio = 96
@@ -240,7 +233,7 @@ output_keybindings() {
    prioritize_entries
 }

-if [[ $1 == "--print" || $1 == "-p" ]]; then
+if [[ "$1" == "--print" || "$1" == "-p" ]]; then
  output_keybindings
 else
  monitor_height=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .height')
@@ -249,3 +242,4 @@ else
  output_keybindings |
    walker --dmenu -p 'Keybindings' --width 800 --height "$menu_height"
 fi
+
@@ -13,7 +13,7 @@ mkdir -p "$STATE_DIR/skipped"
 for file in ~/.local/share/omarchy/migrations/*.sh; do
  filename=$(basename "$file")

-  if [[ ! -f $STATE_DIR/$filename && ! -f $STATE_DIR/skipped/$filename ]]; then
+  if [[ ! -f "$STATE_DIR/$filename" && ! -f "$STATE_DIR/skipped/$filename" ]]; then
    echo -e "\e[32m\nRunning migration (${filename%.sh})\e[0m"

    if bash $file; then
@@ -1,24 +0,0 @@
-#!/bin/bash
-
-# Install an npx wrapper for a given npm package.
-# Usage: omarchy-npx-install <package> [command-name]
-#
-# If command-name is omitted, it defaults to the package name.
-# Example: omarchy-npx-install opencode-ai opencode
-
-if [[ -z $1 ]]; then
-  echo "Usage: omarchy-npx-install <package> [command-name]"
-  exit 1
-fi
-
-package=$1
-command=${2:-$1}
-
-mkdir -p "$HOME/.local/bin"
-
-cat > "$HOME/.local/bin/$command" <<EOF
-#!/bin/bash
-exec mise exec node@latest -- npx --yes $package "\$@"
-EOF
-
-chmod +x "$HOME/.local/bin/$command"
@@ -18,11 +18,9 @@ fzf_args=(

 pkg_names=$(yay -Slqa | fzf "${fzf_args[@]}")

-if [[ -n $pkg_names ]]; then
-  # Add aur/ prefix to each package name and convert to space-separated for yay
-  source omarchy-sudo-keepalive
-
-  echo "$pkg_names" | sed 's/^/aur\//' | tr '\n' ' ' | xargs yay -S --noconfirm
+if [[ -n "$pkg_names" ]]; then
+  # Convert newline-separated selections to space-separated for yay
+  echo "$pkg_names" | tr '\n' ' ' | xargs yay -S --noconfirm
  sudo updatedb
  omarchy-show-done
 fi
@@ -16,10 +16,8 @@ fzf_args=(

 pkg_names=$(pacman -Slq | fzf "${fzf_args[@]}")

-if [[ -n $pkg_names ]]; then
-  source omarchy-sudo-keepalive
-
-  # Convert newline-separated selections to space-separated for pacman
+if [[ -n "$pkg_names" ]]; then
+  # Convert newline-separated selections to space-separated for yay
  echo "$pkg_names" | tr '\n' ' ' | xargs sudo pacman -S --noconfirm
  omarchy-show-done
 fi
@@ -16,7 +16,7 @@ fzf_args=(

 pkg_names=$(yay -Qqe | fzf "${fzf_args[@]}")

-if [[ -n $pkg_names ]]; then
+if [[ -n "$pkg_names" ]]; then
  # Convert newline-separated selections to space-separated for yay
  echo "$pkg_names" | tr '\n' ' ' | xargs sudo pacman -Rns --noconfirm
  omarchy-show-done
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# Set the correct power profile on boot based on current AC/battery state.
-# The udev rules only fire on state *changes*, so without this, booting
-# on AC leaves you in the default balanced mode.
-
-if omarchy-battery-present && ! omarchy-ac-present; then
-  omarchy-powerprofiles-set battery
-else
-  omarchy-powerprofiles-set ac
-fi
@@ -1,22 +0,0 @@
-#!/bin/bash
-
-# Set the power profile to the requested level, falling back to balanced
-# if the requested profile isn't available on this machine.
-#
-# Usage: omarchy-powerprofiles-set <ac|battery>
-
-mapfile -t profiles < <(powerprofilesctl list | awk '/^\s*[* ]\s*[a-zA-Z0-9\-]+:$/ { gsub(/^[*[:space:]]+|:$/,""); print }')
-
-case "$1" in
-  ac)
-    # Prefer performance, fall back to balanced
-    if [[ " ${profiles[*]} " == *" performance "* ]]; then
-      powerprofilesctl set performance
-    else
-      powerprofilesctl set balanced
-    fi
-    ;;
-  battery)
-    powerprofilesctl set balanced
-    ;;
-esac
@@ -6,7 +6,7 @@ CONFIG_FILE="$HOME/.config/chromium-flags.conf"
 INSTALL_GOOGLE_ACCOUNTS=false

 # Check if google accounts were installed
-if [[ -f $CONFIG_FILE ]] && \
+if [[ -f "$CONFIG_FILE" ]] && \
  grep -q -- "--oauth2-client-id" "$CONFIG_FILE" && \
  grep -q -- "--oauth2-client-secret" "$CONFIG_FILE"; then
  INSTALL_GOOGLE_ACCOUNTS=true
@@ -16,6 +16,6 @@ fi
 omarchy-refresh-config chromium-flags.conf

 # Re-install Google accounts if previously configured
-if [[ $INSTALL_GOOGLE_ACCOUNTS == "true" ]]; then
+if [[ "$INSTALL_GOOGLE_ACCOUNTS" == true ]]; then
  omarchy-install-chromium-google-account
 fi
@@ -5,7 +5,7 @@

 config_file=$1

-if [[ -z $config_file ]]; then
+if [[ -z "$config_file" ]]; then
  cat <<USAGE
  Usage: $0 [config_file]

@@ -22,7 +22,7 @@ user_config_file="${HOME}/.config/$config_file"
 default_config_file="${HOME}/.local/share/omarchy/config/$config_file"
 backup_config_file="$user_config_file.bak.$(date +%s)"

-if [[ -f $user_config_file ]]; then
+if [[ -f "$user_config_file" ]]; then
  # Create preliminary backup
  cp -f "$user_config_file" "$backup_config_file" 2>/dev/null

@@ -7,18 +7,17 @@
 sudo cp -f /etc/pacman.conf /etc/pacman.conf.bak
 sudo cp -f /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.bak

-channel="${1:-stable}"
-
-if [[ $channel != "stable" && $channel != "rc" && $channel != "edge" ]]; then
-  echo "Error: Invalid channel '$channel'. Must be one of: stable, rc, edge"
-  exit 1
+if [[ $1 == "edge" ]]; then
+  sudo cp -f ~/.local/share/omarchy/default/pacman/pacman-edge.conf /etc/pacman.conf
+  sudo cp -f ~/.local/share/omarchy/default/pacman/mirrorlist-edge /etc/pacman.d/mirrorlist
+  echo "Setting channel to edge"
+else
+  sudo cp -f ~/.local/share/omarchy/default/pacman/pacman-stable.conf /etc/pacman.conf
+  sudo cp -f ~/.local/share/omarchy/default/pacman/mirrorlist-stable /etc/pacman.d/mirrorlist
+  echo "Setting channel to stable"
 fi

-echo "Setting channel to $channel"
 echo

-sudo cp -f "$OMARCHY_PATH/default/pacman/pacman-$channel.conf" /etc/pacman.conf
-sudo cp -f "$OMARCHY_PATH/default/pacman/mirrorlist-$channel" /etc/pacman.d/mirrorlist
-
 # Reset all package DBs and then update
-sudo pacman -Syyuu --noconfirm
+sudo pacman -Syyu --noconfirm
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Refresh the SDDM theme from default
-
-sudo rm -rf /usr/share/sddm/themes/omarchy
-sudo cp -r $OMARCHY_PATH/default/sddm/omarchy /usr/share/sddm/themes/omarchy
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Overwrite the user tmux config with the Omarchy default and reload tmux.
-
-omarchy-refresh-config tmux/tmux.conf
-omarchy-restart-tmux
@@ -5,17 +5,9 @@
 # Ensure walker is set to autostart
 mkdir -p ~/.config/autostart/
 cp $OMARCHY_PATH/default/walker/walker.desktop ~/.config/autostart/
-
-# And restarts if it crashes or is killed
-mkdir -p ~/.config/systemd/user/app-walker@autostart.service.d/
-cp $OMARCHY_PATH/default/walker/restart.conf ~/.config/systemd/user/app-walker@autostart.service.d/restart.conf
-
 systemctl --user daemon-reload

-# Refresh configs
 omarchy-refresh-config walker/config.toml
 omarchy-refresh-config elephant/calc.toml
 omarchy-refresh-config elephant/desktopapplications.toml
-
-# Restart service
 omarchy-restart-walker
@@ -10,5 +10,5 @@ if gum confirm "Are you sure you want to reinstall and lose all config changes?"
  omarchy-reinstall-pkgs
  omarchy-reinstall-configs

-  gum confirm "System has been reinstalled. Reboot?" && omarchy-system-reboot
+  gum confirm "System has been reinstalled. Reboot?" && omarchy-cmd-reboot
 fi
@@ -3,7 +3,7 @@ set -e

 # Overwrite all user configs with the Omarchy defaults.

-if (( EUID == 0 )); then
+if [ "$EUID" -eq 0 ]; then
  echo "Error: This script should not be run as root"
  exit 1
 fi
@@ -3,6 +3,6 @@ set -e

 # Reinstall the Omarchy configuration directory from the git source.

-git clone --depth=1 "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
+git clone "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
 mv $OMARCHY_PATH ~/.local/share/omarchy-old
 mv ~/.local/share/omarchy-new $OMARCHY_PATH
@@ -1,10 +1,7 @@
 #!/bin/bash

-# Remove a development environment that was previously installed via omarchy-install-dev-env.
-# Usage: omarchy-remove-dev-env <ruby|node|bun|deno|go|php|laravel|symfony|python|elixir|phoenix|zig|rust|java|dotnet|ocaml|clojure|scala>
-
-if [[ -z $1 ]]; then
-  echo "Usage: omarchy-remove-dev-env <ruby|node|bun|deno|go|php|laravel|symfony|python|elixir|phoenix|zig|rust|java|dotnet|ocaml|clojure|scala>" >&2
+if [[ -z "$1" ]]; then
+  echo "Usage: omarchy-remove-dev-env <ruby|node|bun|deno|go|php|laravel|symfony|python|elixir|phoenix|zig|rust|java|dotnet|ocaml|clojure>" >&2
  exit 1
 fi

@@ -96,13 +93,6 @@ clojure)
  mise uninstall clojure --all
  mise rm -g clojure
  ;;
-scala)
-  echo -e "Removing Scala...\n"
-  mise uninstall scala --all
-  mise uninstall scala-cli --all
-  mise rm -g scala
-  mise rm -g scala-cli
-  ;;
 *)
  echo "Unknown environment: $1"
  exit 1
@@ -1,36 +0,0 @@
-#!/bin/bash
-
-# Remove preinstalled Omarchy applications (web apps, TUIs, and selected packages).
-# This removes all web apps, TUIs, plus specific desktop applications.
-
-if gum confirm "Are you sure you want to remove all preinstalled web apps, TUI wrappers, and desktop applications?"; then
-  echo -e "Removing preinstalled Omarchy applications...\n"
-
-  omarchy-webapp-remove-all
-  omarchy-tui-remove-all
-
-  cp ~/.config/hypr/bindings.conf ~/.config/hypr/bindings.conf.bak
-  cp "$OMARCHY_PATH/default/hypr/plain-bindings.conf" ~/.config/hypr/bindings.conf
-  hyprctl reload
-
-  # Remove npx stubs
-  rm -f ~/.local/bin/codex ~/.local/bin/gemini ~/.local/bin/copilot \
-       ~/.local/bin/opencode ~/.local/bin/playwright-cli ~/.local/bin/pi
-
-  omarchy-pkg-drop \
-    aether \
-    typora \
-    spotify \
-    libreoffice-fresh \
-    1password-beta \
-    1password-cli \
-    xournalpp \
-    signal-desktop \
-    pinta \
-    obsidian \
-    obs-studio \
-    kdenlive \
-    lazydocker \
-    opencode \
-    claude-code
-fi
@@ -0,0 +1,4 @@
+#!/bin/bash
+
+# Resetting sudo lockout for user
+su -c "faillock --reset --user $USER"
@@ -1,7 +1,4 @@
 #!/bin/bash

-# Restart an application by killing it and relaunching via uwsm.
-# Usage: omarchy-restart-app <application-name> [application-args...]
-
 pkill -x $1
-setsid uwsm-app -- "$@" >/dev/null 2>&1 &
+setsid uwsm-app -- $1 >/dev/null 2>&1 &
@@ -1,7 +1,5 @@
 #!/bin/bash

-# Unblock and restart the bluetooth service.
-
 echo -e "Unblocking bluetooth...\n"
 rfkill unblock bluetooth
 rfkill list bluetooth
@@ -1,5 +1,3 @@
 #!/bin/bash

-# Restart the hypridle service (used for idle detection and auto-lock).
-
 omarchy-restart-app hypridle
@@ -1,5 +1,3 @@
 #!/bin/bash

-# Restart the hyprsunset service (used for blue light filtering/night light).
-
 omarchy-restart-app hyprsunset
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
David Heinemeier Hansson	79dc4c4b52	Reminder to add to OPR	2026-01-19 17:09:55 -04:00
David Heinemeier Hansson	3678b27170	Prevent race condition	2026-01-19 14:16:21 -04:00
David Heinemeier Hansson	08fead671e	Merge branch 'dev' into toggle-hybrid-gpu	2026-01-19 14:07:36 -04:00
David Heinemeier Hansson	df65a4aaef	Relying on the new config should be enough since we are restarting anyway	2026-01-17 15:00:20 -05:00
David Heinemeier Hansson	b218655301	No need for extensions Matches existing style	2026-01-17 14:57:55 -05:00
David Heinemeier Hansson	5fac51272c	Make it exe	2026-01-17 14:56:34 -05:00
David Heinemeier Hansson	4921d68ee1	These are sudo actions	2026-01-17 14:53:54 -05:00
David Heinemeier Hansson	7e18659cd6	Spacing	2026-01-17 14:53:00 -05:00
David Heinemeier Hansson	989229d515	Merge branch 'dev' into toggle-hybrid-gpu	2026-01-17 14:50:32 -05:00
David Heinemeier Hansson	64f7880b08	Revise switching process	2026-01-17 14:30:08 -05:00
David Heinemeier Hansson	8e21a5341f	Wording	2026-01-15 18:02:55 -05:00
David Heinemeier Hansson	e73f56b1b1	Simplify	2026-01-15 18:01:15 -05:00
David Heinemeier Hansson	16edd8982b	Use correct exit	2026-01-15 17:59:26 -05:00
David Heinemeier Hansson	06d06c0c3d	Toggle hybrid GPU mode via supergfxctl Very useful for Asus G14 and other laptops with NVIDIA + AMD iGPU combos.	2026-01-15 17:56:08 -05:00