Steam should be launching inside gamescope

And we should support all controllers
2026-08-02 12:47:49 +02:00 · 2026-03-15 22:03:23 +01:00
207 changed files with 398 additions and 1415 deletions
@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Returns true if AC power is connected.
-
-for ac in /sys/class/power_supply/AC* /sys/class/power_supply/ADP*; do
-  [[ -r $ac/online && $(cat "$ac/online") == "1" ]] && exit 0
-done
-
-exit 1
@@ -7,16 +7,19 @@ battery_info=$(upower -i $(upower -e | grep BAT))
 echo "$battery_info" | awk '/time to (empty|full)/ {
    value = $4
    unit = $5
-    if (unit ~ /^minute/) {
-        printf "%dm", int(value)
+    if (unit == "minutes") {
+        hours = int(value / 60)
+        minutes = int(value % 60)
    } else {
        hours = int(value)
        minutes = int((value - hours) * 60)
-        if (minutes > 0) {
-            printf "%dh %dm", hours, minutes
-        } else {
-            printf "%dh", hours
-        }
+    }
+    if (hours > 0 && minutes > 0) {
+        printf "%dh %dm", hours, minutes
+    } else if (hours > 0) {
+        printf "%dh", hours
+    } else {
+        printf "%dm", minutes
    }
    exit
 }'
@@ -23,19 +23,14 @@ fi
 max_brightness="$(brightnessctl -d "$device" max)"
 current_brightness="$(brightnessctl -d "$device" get)"

-# Calculate step as 10% of max brightness. Keyboards with many levels (e.g. 512)
-# need larger steps; keyboards with few levels (e.g. 3) fall back to step=1.
-step=$(( max_brightness / 10 ))
-(( step < 1 )) && step=1
-
+# Calculate step as one unit (keyboards typically have discrete levels like 0-3).
 if [[ $direction == "cycle" ]]; then
-  new_brightness=$(( current_brightness + step ))
-  (( new_brightness > max_brightness )) && new_brightness=0
+  new_brightness=$(( (current_brightness + 1) % (max_brightness + 1) ))
 elif [[ $direction == "up" ]]; then
-  new_brightness=$(( current_brightness + step ))
+  new_brightness=$((current_brightness + 1))
  (( new_brightness > max_brightness )) && new_brightness=$max_brightness
 else
-  new_brightness=$(( current_brightness - step ))
+  new_brightness=$((current_brightness - 1))
  (( new_brightness < 0 )) && new_brightness=0
 fi

@@ -2,7 +2,7 @@

 # Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.

-focused_monitor=$(omarchy-hyprland-monitor-focused)
+focused_monitor="$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"

 sinks=$(pactl -f json list sinks | jq '[.[] | select((.ports | length == 0) or ([.ports[]? | .availability != "not available"] | any))]')
 sinks_count=$(echo "$sinks" | jq '. | length')
@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Toggle microphone mute. Dell XPS systems get special handling for the hardware LED.
-
-if omarchy-hw-match "XPS"; then
-  omarchy-cmd-mic-mute-xps
-else
-  swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)" --input-volume mute-toggle
-fi
@@ -1,44 +0,0 @@
-#!/bin/bash
-
-# Toggle microphone mute on Dell XPS systems. Uses wpctl for reliable toggling
-# and syncs the ALSA capture switch so the hardware mic mute LED follows state.
-
-wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
-
-if pactl get-source-mute @DEFAULT_SOURCE@ | rg -q 'yes'; then
-  alsa_value='off,off'
-  osd_message='Microphone muted'
-  osd_icon='microphone-sensitivity-muted-symbolic'
-else
-  alsa_value='on,on'
-  osd_message='Microphone on'
-  osd_icon='audio-input-microphone-symbolic'
-fi
-
-if [[ -e /sys/class/leds/platform::micmute/brightness ]]; then
-  default_source=$(pactl get-default-source)
-  alsa_card=$(pactl -f json list sources | jq -r --arg source "$default_source" '
-    .[] | select(.name == $source) |
-    .properties["alsa.card"] // .properties["api.alsa.card"] // .properties["api.alsa.pcm.card"] // empty
-  ' | head -1)
-
-  if [[ -n $alsa_card ]]; then
-    cards=("$alsa_card")
-  else
-    mapfile -t cards < <(compgen -G '/proc/asound/card*' | rg -o 'card[0-9]+' | sed 's/card//' | sort -u)
-  fi
-
-  for card in "${cards[@]}"; do
-    while IFS= read -r control; do
-      if [[ $control != *"Jack Microphone"* ]]; then
-        amixer -c "$card" cset "$control" "$alsa_value" >/dev/null 2>&1 || true
-        break 2
-      fi
-    done < <(amixer -c "$card" controls 2>/dev/null | rg -o "name='[^']*Microphone Capture Switch'")
-  done
-fi
-
-swayosd-client \
-  --monitor "$(omarchy-hyprland-monitor-focused)" \
-  --custom-message "$osd_message" \
-  --custom-icon "$osd_icon"
@@ -63,7 +63,7 @@ start_webcam_overlay() {
  done

  ffplay -f v4l2 $video_size_arg -framerate 30 "$WEBCAM_DEVICE" \
-    -vf "crop=iw/2:ih,scale=${target_width}:-1" \
+    -vf "scale=${target_width}:-1" \
    -window_title "WebcamOverlay" \
    -noborder \
    -fflags nobuffer -flags low_delay \
@@ -8,8 +8,8 @@
 OUTPUT_DIR="${OMARCHY_SCREENSHOT_DIR:-${XDG_PICTURES_DIR:-$HOME/Pictures}}"

 if [[ ! -d $OUTPUT_DIR ]]; then
-  mkdir -p "$OUTPUT_DIR"
-  notify-send "Created screenshot directory: $OUTPUT_DIR" -u normal -t 2000
+  notify-send "Screenshot directory does not exist: $OUTPUT_DIR" -u critical -t 3000
+  exit 1
 fi

 pkill slurp && exit 0
@@ -33,7 +33,7 @@ if [[ -n $font_name ]]; then
    omarchy-restart-swayosd

    if pgrep -x ghostty; then
-      notify-send -u low "    You must restart Ghostty to see font change"
+      notify-send "    You must restart Ghostty to see font change"
    fi

    omarchy-hook font-set "$font_name"
@@ -1,94 +0,0 @@
-#!/usr/bin/env python3
-
-"""Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
-
-Monitors touchpad button press events and sends haptic pulses via HID
-feature reports. Required because the kernel's HID haptic subsystem only
-supports Auto Trigger with waveform enumeration, not the simpler Manual
-Trigger protocol used by these Synaptics touchpads.
-"""
-
-import fcntl, glob, os, struct, sys
-
-VENDOR = "06CB"
-REPORT_ID = 0x37
-INTENSITY = 40  # 0-100
-
-# input_event: struct timeval (16 bytes on 64-bit) + type(H) + code(H) + value(i)
-EVENT_FORMAT = "llHHi"
-EVENT_SIZE = struct.calcsize(EVENT_FORMAT)
-EV_KEY = 0x01
-BTN_LEFT = 272
-BTN_RIGHT = 273
-BTN_MIDDLE = 274
-
-# ioctl: HIDIOCSFEATURE(len) = _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
-def HIDIOCSFEATURE(length):
-    return 0xC0000000 | (length << 16) | (ord("H") << 8) | 0x06
-
-
-def find_hidraw():
-    for path in sorted(glob.glob("/sys/class/hidraw/hidraw*")):
-        uevent = os.path.join(path, "device", "uevent")
-        try:
-            with open(uevent) as f:
-                content = f.read().upper()
-            if f"0000{VENDOR}" in content:
-                return os.path.join("/dev", os.path.basename(path))
-        except OSError:
-            continue
-    return None
-
-
-def find_touchpad_event():
-    for path in sorted(glob.glob("/sys/class/input/event*/device/name")):
-        try:
-            with open(path) as f:
-                name = f.read().strip().upper()
-            if VENDOR in name and "TOUCHPAD" in name:
-                event = path.split("/")[-3]
-                return os.path.join("/dev/input", event)
-        except OSError:
-            continue
-    return None
-
-
-def main():
-    hidraw = find_hidraw()
-    if not hidraw:
-        print("No Synaptics haptic touchpad hidraw device found", file=sys.stderr)
-        sys.exit(1)
-
-    event = find_touchpad_event()
-    if not event:
-        print("No Synaptics haptic touchpad input device found", file=sys.stderr)
-        sys.exit(1)
-
-    print(f"Haptic touchpad: hidraw={hidraw} input={event} intensity={INTENSITY}", flush=True)
-
-    haptic_report = struct.pack("BB", REPORT_ID, INTENSITY)
-    ioctl_req = HIDIOCSFEATURE(len(haptic_report))
-
-    hidraw_fd = os.open(hidraw, os.O_RDWR)
-    event_fd = os.open(event, os.O_RDONLY)
-
-    try:
-        while True:
-            data = os.read(event_fd, EVENT_SIZE)
-            if len(data) < EVENT_SIZE:
-                continue
-            _, _, ev_type, code, value = struct.unpack(EVENT_FORMAT, data)
-            if ev_type == EV_KEY and code in (BTN_LEFT, BTN_RIGHT, BTN_MIDDLE) and value == 1:
-                try:
-                    fcntl.ioctl(hidraw_fd, ioctl_req, haptic_report)
-                except OSError:
-                    pass
-    except KeyboardInterrupt:
-        pass
-    finally:
-        os.close(event_fd)
-        os.close(hidraw_fd)
-
-
-if __name__ == "__main__":
-    main()
@@ -14,22 +14,9 @@ if ! command -v limine-mkinitcpio &>/dev/null; then
 fi

 MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
-SWAP_FILE="/swap/swapfile"
-RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"

 # Check if hibernation is already configured
 if [[ -f $MKINITCPIO_CONF ]] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
-  # Fix empty resume_offset if btrfs map-swapfile failed during initial setup
-  if [[ -f $RESUME_DROP_IN ]] && grep -q 'resume_offset="$' "$RESUME_DROP_IN" && [[ -f $SWAP_FILE ]]; then
-    RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE" 2>/dev/null)
-    if [[ -n $RESUME_OFFSET ]]; then
-      echo "Fixing empty resume_offset ($RESUME_OFFSET)"
-      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" "$RESUME_DROP_IN"
-      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" /etc/default/limine
-      sudo limine-mkinitcpio
-      sudo limine-update
-    fi
-  fi
  echo "Hibernation is already set up"
  exit 0
 fi
@@ -42,6 +29,7 @@ if [[ $1 != "--force" ]]; then
 fi

 SWAP_SUBVOLUME="/swap"
+SWAP_FILE="$SWAP_SUBVOLUME/swapfile"

 # Create btrfs subvolume for swap
 if ! sudo btrfs subvolume show "$SWAP_SUBVOLUME" &>/dev/null; then
@@ -80,18 +68,15 @@ sudo cp -p "$OMARCHY_PATH/default/systemd/system-sleep/keyboard-backlight" /usr/

 # Add resume= kernel parameters so the initramfs resume hook knows where to find the
 # hibernation image. Without these, resume happens late (after GPU drivers load) and fails.
+RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
 if [[ ! -f $RESUME_DROP_IN ]]; then
  echo "Adding resume kernel parameters"
  sudo swapon -p 0 "$SWAP_FILE" 2>/dev/null
  RESUME_DEVICE=$(findmnt -no SOURCE -T "$SWAP_FILE" | sed 's/\[.*\]//')
  RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
-  if [[ -n $RESUME_OFFSET ]]; then
-    sudo mkdir -p /etc/limine-entry-tool.d
-    echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
-    sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
-  else
-    echo "Warning: Could not determine resume offset for $SWAP_FILE" >&2
-  fi
+  sudo mkdir -p /etc/limine-entry-tool.d
+  echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+  sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
 fi

 # Use ACPI alarm for RTC wakeup on s2idle systems (needed for suspend-then-hibernate)
@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Match Dell XPS systems with LG OLED panel on Intel Panther Lake (Xe3) GPU.
-
-omarchy-hw-match "XPS" \
-  && omarchy-hw-intel-ptl \
-  && test "$(od -An -tx1 -j8 -N2 /sys/class/drm/card*-eDP-*/edid 2>/dev/null | tr -d ' \n')" = "30e4"
@@ -3,4 +3,4 @@
 # Detect whether the computer is a Framework Laptop 16.

 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Framework" ]] &&
-  omarchy-hw-match "Laptop 16"
+  grep -q "Laptop 16" /sys/class/dmi/id/product_name 2>/dev/null
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Detect whether the computer has an Intel Panther Lake GPU.
-
-lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Match against the computer's DMI product name (case-insensitive).
-# Usage: omarchy-hw-match "XPS"
-
-grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null
@@ -3,4 +3,4 @@
 # Detect whether the computer is a Microsoft Surface device.

 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Microsoft Corporation" ]] &&
-  omarchy-hw-match "Surface"
+  grep -q "Surface" /sys/class/dmi/id/product_name 2>/dev/null
@@ -1,6 +0,0 @@
-#!/bin/bash
-
-# Detect whether Vulkan is available.
-
-[[ -d /usr/share/vulkan/icd.d ]] &&
-  find /usr/share/vulkan/icd.d -maxdepth 1 -name "*.json" -print -quit | grep -q .
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Toggles transparency for the currently focused window.
-
-hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Print the name of the currently focused Hyprland monitor.
-
-hyprctl monitors -j | jq -r '.[] | select(.focused == true).name'
@@ -1,13 +0,0 @@
-#!/bin/bash
-
-# Disable the internal laptop display. No-op if already disabled or if it
-# would leave no active display.
-
-if omarchy-hyprland-monitors-many; then
-  if omarchy-hyprland-toggle-disabled internal-monitor-disable; then
-    omarchy-hyprland-toggle --enabled-notification "󰍹    Laptop display disabled" internal-monitor-disable
-  fi
-else
-  notify-send -u low "󰍹    Can't disable the only active display"
-  exit 1
-fi
@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Enable the internal laptop display. No-op if already enabled.
-
-if omarchy-hyprland-toggle-enabled internal-monitor-disable; then
-  omarchy-hyprland-toggle --disabled-notification "󰍹    Laptop display enabled" internal-monitor-disable
-fi
@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Re-enable the internal display if it was toggled off and no external monitors
-# are currently active (e.g. external got disconnected live, during sleep, or
-# wasn't present on boot).
-
-if omarchy-hyprland-monitors-none && omarchy-hyprland-toggle-enabled internal-monitor-disable; then
-  omarchy-hyprland-monitor-internal-enable
-fi
@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# Toggle the internal laptop display on/off.
-
-if omarchy-hyprland-toggle-enabled internal-monitor-disable; then
-  omarchy-hyprland-monitor-internal-enable
-else
-  omarchy-hyprland-monitor-internal-disable
-fi
@@ -18,5 +18,7 @@ case "$CURRENT_INT" in
 *) NEW_SCALE=1 ;;
 esac

+hyprctl keyword misc:disable_scale_notification true
 hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
-notify-send -u low "󰍹    Display scaling set to ${NEW_SCALE}x"
+hyprctl keyword misc:disable_scale_notification false
+notify-send "󰍹    Display scaling set to ${NEW_SCALE}x"
@@ -1,14 +0,0 @@
-#!/bin/bash
-
-# Listen on Hyprland's event socket and recover the internal display whenever
-# a monitor is removed.
-
-SOCKET="$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock"
-
-socat -U - "UNIX-CONNECT:$SOCKET" | while read -r event; do
-  case "$event" in
-    monitorremoved\>\>*|monitorremovedv2\>\>*)
-      omarchy-hyprland-monitor-internal-recover
-      ;;
-  esac
-done
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Returns true when there are multiple monitors connected (so we can disable the internal one)
-
-(( $(hyprctl monitors -j 2>/dev/null | jq length) > 1 ))
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Returns true when no monitors are connected
-
-(( $(hyprctl monitors -j 2>/dev/null | jq length) == 0 ))
@@ -1,31 +0,0 @@
-#!/bin/bash
-
-# Toggle permanent Hyprland flags by copying them into a directory that's sourced entirely.
-
-ENABLED_NOTIFICATION=""
-DISABLED_NOTIFICATION=""
-
-while [[ $# -gt 1 ]]; do
-  case $1 in
-    --enabled-notification) ENABLED_NOTIFICATION="$2"; shift 2 ;;
-    --disabled-notification) DISABLED_NOTIFICATION="$2"; shift 2 ;;
-    *) break ;;
-  esac
-done
-
-FLAG_NAME="$1"
-FLAG="$HOME/.local/state/omarchy/toggles/hypr/$FLAG_NAME.conf"
-FLAG_SOURCE="$OMARCHY_PATH/default/hypr/toggles/$FLAG_NAME.conf"
-
-if [[ -f $FLAG ]]; then
-  rm $FLAG
-  [[ -n $DISABLED_NOTIFICATION ]] && notify-send -u low "$DISABLED_NOTIFICATION"
-elif [[ -f $FLAG_SOURCE ]]; then
-  cp $FLAG_SOURCE $FLAG
-  [[ -n $ENABLED_NOTIFICATION ]] && notify-send -u low "$ENABLED_NOTIFICATION"
-else
-  echo "Flag not found: $FLAG_NAME"
-  exit 1
-fi
-
-hyprctl reload
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Check if a Hyprland toggle is currently disabled (missing).
-
-[[ ! -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Check if a Hyprland toggle is currently enabled.
-
-[[ -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]
@@ -1,5 +1,15 @@
 #!/bin/bash

-# Toggles the window gaps globally between no gaps and the default.
+# Toggles the window gaps globally between no gaps and the default 10/5/2.

-omarchy-hyprland-toggle window-no-gaps
+gaps=$(hyprctl getoption general:gaps_out -j | jq -r '.custom' | awk '{print $1}')
+
+if [[ $gaps == "0" ]]; then
+  hyprctl keyword general:gaps_out 10
+  hyprctl keyword general:gaps_in 5
+  hyprctl keyword general:border_size 2
+else
+  hyprctl keyword general:gaps_out 0
+  hyprctl keyword general:gaps_in 0
+  hyprctl keyword general:border_size 0
+fi
@@ -1,8 +1,13 @@
 #!/bin/bash

-# Toggle single-window square aspect ratio.
+# Check current single_window_aspect_ratio setting
+CURRENT_VALUE=$(hyprctl getoption "layout:single_window_aspect_ratio" 2>/dev/null | head -1)

-omarchy-hyprland-toggle \
-  --enabled-notification "      Enable single-window square aspect ratio" \
-  --disabled-notification "      Disable single-window square aspect ratio" \
-  single-window-aspect-ratio
+# Parse vec2 output: "vec2: [1, 1]" or "vec2: [0, 0]"
+if [[ $CURRENT_VALUE == *"[1, 1]"* ]]; then
+  hyprctl keyword layout:single_window_aspect_ratio "0 0"
+  notify-send "    Disable single-window square aspect ratio"
+else
+  hyprctl keyword layout:single_window_aspect_ratio "1 1"
+  notify-send "    Enable single-window square aspect"
+fi
@@ -11,4 +11,4 @@ case "$CURRENT_LAYOUT" in
 esac

 hyprctl keyword workspace $ACTIVE_WORKSPACE, layout:$NEW_LAYOUT
-notify-send -u low "󱂬    Workspace layout set to $NEW_LAYOUT"
+notify-send "󱂬    Workspace layout set to $NEW_LAYOUT"
@@ -0,0 +1,30 @@
+#!/bin/bash
+
+# Install support for using Xbox and PlayStation controllers with Steam/RetroArch/etc.
+
+set -e
+
+# Xbox: Install xpadneo for improved Xbox controller support
+omarchy-pkg-add linux-headers
+omarchy-pkg-aur-add xpadneo-dkms
+
+# Xbox: Prevent xpad/xpadneo driver conflict
+echo blacklist xpad | sudo tee /etc/modprobe.d/blacklist-xpad.conf >/dev/null
+echo hid_xpadneo | sudo tee /etc/modules-load.d/xpadneo.conf >/dev/null
+
+# PlayStation: Ensure hid-playstation module loads at boot
+echo hid_playstation | sudo tee /etc/modules-load.d/hid-playstation.conf >/dev/null
+
+# PlayStation: Enable userspace HID for Bluetooth controller support
+if [ -f /etc/bluetooth/input.conf ]; then
+  grep -q "UserspaceHID=true" /etc/bluetooth/input.conf || \
+    sudo sed -i '/^\[General\]/a UserspaceHID=true' /etc/bluetooth/input.conf
+else
+  printf '[General]\nUserspaceHID=true\n' | sudo tee /etc/bluetooth/input.conf >/dev/null
+fi
+
+# Give user access to game controllers
+sudo usermod -a -G input $USER
+
+# Modules need to be loaded
+gum confirm "Install requires reboot. Ready?" && sudo reboot now
@@ -1,12 +0,0 @@
-#!/bin/bash
-
-# Install the ONCE service, enable its background service, and launch the TUI.
-
-echo "Installing ONCE..."
-omarchy-pkg-add once-bin
-
-echo "Enabling ONCE background service..."
-sudo systemctl enable --now once-background.service
-
-echo -e "\nLaunching ONCE..."
-once
@@ -1,9 +1,17 @@
 #!/bin/bash

-# Install and launch Steam after first letting the user pick the correct grahics card drivers.
+# Install Steam with gaming essentials (Gamescope, GameMode, MangoHud) and launch.

 set -e

+omarchy-pkg-add gamescope gamemode lib32-gamemode mangohud lib32-mangohud
+
 echo "Now pick dependencies matching your graphics card"
 sudo pacman -S steam
-setsid gtk-launch steam >/dev/null 2>&1 &
+
+# Override Steam's .desktop to launch inside Gamescope
+mkdir -p ~/.local/share/applications
+sed 's|Exec=/usr/bin/steam|Exec=gamescope -e -- steam|' \
+  /usr/share/applications/steam.desktop > ~/.local/share/applications/steam.desktop
+
+setsid gamescope -e -- steam >/dev/null 2>&1 &
@@ -1,19 +0,0 @@
-#!/bin/bash
-
-# Install support for using Xbox controllers with Steam/RetroArch/etc.
-
-set -e
-
-# Install xpadneo to ensure controllers work out of the box
-omarchy-pkg-add linux-headers
-omarchy-pkg-aur-add xpadneo-dkms
-
-# Prevent xpad/xpadneo driver conflict
-echo blacklist xpad | sudo tee /etc/modprobe.d/blacklist-xpad.conf >/dev/null
-echo hid_xpadneo | sudo tee /etc/modules-load.d/xpadneo.conf >/dev/null
-
-# Give user access to game controllers
-sudo usermod -a -G input $USER
-
-# Modules need to be loaded
-gum confirm "Install requires reboot. Ready?" && sudo reboot now
@@ -11,14 +11,14 @@ fi
 pgrep -f org.omarchy.screensaver && exit 0

 # Allow screensaver to be turned off but also force started
-if omarchy-toggle-enabled screensaver-off && [[ $1 != "force" ]]; then
+if [[ -f ~/.local/state/omarchy/toggles/screensaver-off ]] && [[ $1 != "force" ]]; then
  exit 1
 fi

 # Silently quit Walker on overlay
 walker -q

-focused=$(omarchy-hyprland-monitor-focused)
+focused=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')
 terminal=$(xdg-terminal-exec --print-id)

 for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
@@ -46,7 +46,7 @@ for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
      -e omarchy-cmd-screensaver
    ;;
  *)
-    notify-send -u low "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
+    notify-send "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
    ;;
  esac
 done
@@ -9,7 +9,7 @@ fi

 # Ensure walker service is running
 if ! pgrep -f "walker --gapplication-service" > /dev/null; then
-  setsid uwsm-app -- env GSK_RENDERER=cairo walker --gapplication-service &
+  setsid uwsm-app -- walker --gapplication-service &
 fi

 exec walker --width 644 --maxheight 300 --minheight 300 "$@"
@@ -5,7 +5,7 @@
 browser=$(xdg-settings get default-web-browser)

 case $browser in
-google-chrome* | brave* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
+google-chrome* | brave-browser* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
 *) browser="chromium.desktop" ;;
 esac

@@ -54,7 +54,7 @@ present_terminal() {
 }

 open_in_editor() {
-  notify-send -u low "Editing config file" "$1"
+  notify-send "Editing config file" "$1"
  omarchy-launch-editor "$1"
 }

@@ -168,7 +168,7 @@ show_share_menu() {
 }

 show_toggle_menu() {
-  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Monitor Scaling\n󰛧  Laptop Display") in
+  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Display Scaling") in

  *Screensaver*) omarchy-toggle-screensaver ;;
  *Nightlight*) omarchy-toggle-nightlight ;;
@@ -178,7 +178,6 @@ show_toggle_menu() {
  *Ratio*) omarchy-hyprland-window-single-square-aspect-toggle ;;
  *Gaps*) omarchy-hyprland-window-gaps-toggle ;;
  *Scaling*) omarchy-hyprland-monitor-scaling-cycle ;;
-  *Laptop*) omarchy-hyprland-monitor-internal-toggle ;;
  *) back_to show_trigger_menu ;;
  esac
 }
@@ -222,6 +221,7 @@ show_font_menu() {
 show_setup_menu() {
  local options="  Audio\n  Wifi\n󰂯  Bluetooth\n󱐋  Power Profile\n  System Sleep\n󰍹  Monitors"
  [[ -f ~/.config/hypr/bindings.conf ]] && options="$options\n  Keybindings"
+  options="$options\n  Key Remapping"
  [[ -f ~/.config/hypr/input.conf ]] && options="$options\n  Input"
  options="$options\n󰱔  DNS\n  Security\n  Config"

@@ -234,6 +234,7 @@ show_setup_menu() {
  *Monitors*) open_in_editor ~/.config/hypr/monitors.conf ;;
  *Keybindings*) open_in_editor ~/.config/hypr/bindings.conf ;;
  *Input*) open_in_editor ~/.config/hypr/input.conf ;;
+  *Key\ Remapping*) omarchy-setup-makima && open_in_editor "$HOME/.config/makima/AT Translated Set 2 keyboard.toml" && omarchy-restart-makima ;;
  *DNS*) present_terminal omarchy-setup-dns ;;
  *Security*) show_setup_security_menu ;;
  *Config*) show_setup_config_menu ;;
@@ -277,7 +278,7 @@ show_setup_config_menu() {
 show_setup_system_menu() {
  local options=""

-  if omarchy-toggle-enabled suspend-off; then
+  if [[ -f ~/.local/state/omarchy/toggles/suspend-off ]]; then
    options="$options󰒲  Enable Suspend"
  else
    options="$options󰒲  Disable Suspend"
@@ -316,11 +317,10 @@ show_install_menu() {
 }

 show_install_service_menu() {
-  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN [AUR]\n󰏖  ONCE\n󰟵  Bitwarden\n  Chromium Account") in
+  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN [AUR]\n󰟵  Bitwarden\n  Chromium Account") in
  *Dropbox*) present_terminal omarchy-install-dropbox ;;
  *Tailscale*) present_terminal omarchy-install-tailscale ;;
  *NordVPN*) present_terminal omarchy-install-nordvpn ;;
-  *ONCE*) present_terminal omarchy-install-once ;;
  *Bitwarden*) install_and_launch "Bitwarden" "bitwarden bitwarden-cli" "bitwarden" ;;
  *Chromium*) present_terminal omarchy-install-chromium-google-account ;;
  *) show_install_menu ;;
@@ -365,12 +365,12 @@ show_install_ai_menu() {
 }

 show_install_gaming_menu() {
-  case $(menu "Install" "  Steam\n󰢹  NVIDIA GeForce NOW\n  RetroArch [AUR]\n󰍳  Minecraft\n󰖺  Xbox Controller [AUR]") in
+  case $(menu "Install" "  Steam + Gamescope\n󰢹  NVIDIA GeForce NOW\n  RetroArch [AUR]\n󰍳  Minecraft\n󰖺  Xbox + PS Controllers [AUR]") in
  *Steam*) present_terminal omarchy-install-steam ;;
  *GeForce*) present_terminal omarchy-install-geforce-now ;;
  *RetroArch*) aur_install_and_launch "RetroArch" "retroarch retroarch-assets libretro libretro-fbneo" "com.libretro.RetroArch.desktop" ;;
  *Minecraft*) install_and_launch "Minecraft" "minecraft-launcher" "minecraft-launcher" ;;
-  *Xbox*) present_terminal omarchy-install-xbox-controllers ;;
+  *Controllers*) present_terminal omarchy-install-controllers ;;
  *) show_install_menu ;;
  esac
 }
@@ -529,10 +529,9 @@ show_update_channel_menu() {
  esac
 }
 show_update_process_menu() {
-  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n󰎟  Mako\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
+  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
  *Hypridle*) omarchy-restart-hypridle ;;
  *Hyprsunset*) omarchy-restart-hyprsunset ;;
-  *Mako*) omarchy-restart-mako ;;
  *Swayosd*) omarchy-restart-swayosd ;;
  *Walker*) omarchy-restart-walker ;;
  *Waybar*) omarchy-restart-waybar ;;
@@ -556,11 +555,10 @@ show_update_config_menu() {
 }

 show_update_hardware_menu() {
-  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth\n󰟸  Trackpad") in
+  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth") in
  *Audio*) present_terminal omarchy-restart-pipewire ;;
  *Wi-Fi*) present_terminal omarchy-restart-wifi ;;
  *Bluetooth*) present_terminal omarchy-restart-bluetooth ;;
-  *Trackpad*) present_terminal omarchy-restart-trackpad ;;
  *) show_update_menu ;;
  esac
 }
@@ -579,7 +577,7 @@ show_about() {

 show_system_menu() {
  local options="󱄄  Screensaver\n  Lock"
-  ! omarchy-toggle-enabled suspend-off && options="$options\n󰒲  Suspend"
+  [[ ! -f ~/.local/state/omarchy/toggles/suspend-off ]] && options="$options\n󰒲  Suspend"
  omarchy-hibernation-available && options="$options\n󰤁  Hibernate"
  options="$options\n󰍃  Logout\n󰜉  Restart\n󰐥  Shutdown"

@@ -46,12 +46,8 @@ parse_keycodes() {
  while IFS= read -r line; do
    if [[ $line =~ code:([0-9]+) ]]; then
      code="${BASH_REMATCH[1]}"
-      if [[ $code == "201" ]]; then
-        echo "${line/SUPER SHIFT,code:201/,COPILOT KEY}"
-      else
-        symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
-        echo "${line/code:${code}/$symbol}"
-      fi
+      symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
+      echo "${line/code:${code}/$symbol}"
    elif [[ $line =~ mouse:([0-9]+) ]]; then
      code="${BASH_REMATCH[1]}"

@@ -18,7 +18,7 @@ mkdir -p "$HOME/.local/bin"

 cat > "$HOME/.local/bin/$command" <<EOF
 #!/bin/bash
-exec mise exec node@latest -- npx --yes $package "\$@"
+exec npx --yes $package "\$@"
 EOF

 chmod +x "$HOME/.local/bin/$command"
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# Set the correct power profile on boot based on current AC/battery state.
-# The udev rules only fire on state *changes*, so without this, booting
-# on AC leaves you in the default balanced mode.
-
-if omarchy-battery-present && ! omarchy-ac-present; then
-  omarchy-powerprofiles-set battery
-else
-  omarchy-powerprofiles-set ac
-fi
@@ -1,22 +0,0 @@
-#!/bin/bash
-
-# Set the power profile to the requested level, falling back to balanced
-# if the requested profile isn't available on this machine.
-#
-# Usage: omarchy-powerprofiles-set <ac|battery>
-
-mapfile -t profiles < <(powerprofilesctl list | awk '/^\s*[* ]\s*[a-zA-Z0-9\-]+:$/ { gsub(/^[*[:space:]]+|:$/,""); print }')
-
-case "$1" in
-  ac)
-    # Prefer performance, fall back to balanced
-    if [[ " ${profiles[*]} " == *" performance "* ]]; then
-      powerprofilesctl set performance
-    else
-      powerprofilesctl set balanced
-    fi
-    ;;
-  battery)
-    powerprofilesctl set balanced
-    ;;
-esac
@@ -13,10 +13,6 @@ if gum confirm "Are you sure you want to remove all preinstalled web apps, TUI w
  cp "$OMARCHY_PATH/default/hypr/plain-bindings.conf" ~/.config/hypr/bindings.conf
  hyprctl reload

-  # Remove npx stubs
-  rm -f ~/.local/bin/codex ~/.local/bin/gemini ~/.local/bin/copilot \
-       ~/.local/bin/opencode ~/.local/bin/playwright-cli ~/.local/bin/pi
-
  omarchy-pkg-drop \
    aether \
    typora \
@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Restart makima - key remapping service for remapping Copilot key to Omarchy Menu
+
+sudo systemctl restart makima
@@ -1,23 +0,0 @@
-#!/bin/bash
-
-# Reset the trackpad by unbinding and rebinding its driver.
-# Covers both driver paths:
-#   - i2c_hid_acpi (DesignWare I2C, e.g. XPS 14/16 Synaptics trackpad)
-#   - intel_quicki2c (THC Touch Host Controller)
-
-# Try i2c_hid_acpi path (DesignWare I2C trackpads)
-for dev in /sys/bus/i2c/drivers/i2c_hid_acpi/i2c-*; do
-  [ -e "$dev" ] || continue
-  I2C_DEVICE=$(basename "$dev")
-  echo "Resetting $I2C_DEVICE via i2c_hid_acpi unbind/rebind..."
-  echo "$I2C_DEVICE" | sudo tee /sys/bus/i2c/drivers/i2c_hid_acpi/unbind > /dev/null
-  sleep 1
-  echo "$I2C_DEVICE" | sudo tee /sys/bus/i2c/drivers/i2c_hid_acpi/bind > /dev/null
-  echo "Done"
-done
-
-# Also try THC path
-if lsmod | grep -q intel_quicki2c; then
-  echo "Reloading intel_quicki2c..."
-  sudo modprobe -r intel_quicki2c && sudo modprobe intel_quicki2c
-fi
@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Setup makima - key remapping service for remapping Copilot key to Omarchy Menu
+
+CONFIG_FILE="$HOME/.config/makima/AT Translated Set 2 keyboard.toml"
+
+if [[ ! -f $CONFIG_FILE ]]; then
+  omarchy-pkg-add makima-bin
+
+  mkdir -p "$HOME/.config/makima"
+  cp "$OMARCHY_PATH/default/makima/AT Translated Set 2 keyboard.toml" "$CONFIG_FILE"
+
+  sudo mkdir -p /etc/systemd/system/makima.service.d
+  sudo tee /etc/systemd/system/makima.service.d/override.conf >/dev/null <<EOF
+[Service]
+User=$USER
+Environment="MAKIMA_CONFIG=/home/$USER/.config/makima"
+EOF
+
+  sudo systemctl daemon-reload
+  sudo systemctl enable --now makima 2>/dev/null || true
+fi
@@ -9,7 +9,7 @@ progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"

 swayosd-client \
-  --monitor "$(omarchy-hyprland-monitor-focused)" \
+  --monitor "$(hyprctl monitors -j | jq -r '.[]|select(.focused==true).name')" \
  --custom-icon display-brightness \
  --custom-progress "$progress" \
  --custom-progress-text "${percent}%"
@@ -9,7 +9,7 @@ progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"

 swayosd-client \
-  --monitor "$(omarchy-hyprland-monitor-focused)" \
+  --monitor "$(hyprctl monitors -j | jq -r '.[]|select(.focused==true).name')" \
  --custom-icon keyboard-brightness \
  --custom-progress "$progress" \
  --custom-progress-text "${percent}%"
@@ -13,12 +13,12 @@ if omarchy-cmd-present chromium || omarchy-cmd-present brave; then
  fi

  if omarchy-cmd-present chromium; then
-    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
-    chromium --refresh-platform-policy --no-startup-window &>/dev/null
+    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
+    chromium --refresh-platform-policy --no-startup-window >/dev/null
  fi

  if omarchy-cmd-present brave; then
-    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
-    brave --refresh-platform-policy --no-startup-window &>/dev/null
+    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
+    brave --refresh-platform-policy --no-startup-window >/dev/null
  fi
 fi
@@ -7,8 +7,9 @@ VS_CODE_THEME="$HOME/.config/omarchy/current/theme/vscode.json"
 set_theme() {
  local editor_cmd="$1"
  local settings_path="$2"
+  local skip_flag="$3"

-  omarchy-cmd-present "$editor_cmd" || return 0
+  omarchy-cmd-present "$editor_cmd" && [[ ! -f $skip_flag ]] || return 0

  if [[ -f $VS_CODE_THEME ]]; then
    theme_name=$(jq -r '.name' "$VS_CODE_THEME")
@@ -33,7 +34,6 @@ set_theme() {
  fi
 }

-! omarchy-toggle-enabled skip-vscode-theme-changes && set_theme "code" "$HOME/.config/Code/User/settings.json"
-! omarchy-toggle-enabled skip-vscode-insiders-theme-changes && set_theme "code-insiders" "$HOME/.config/Code - Insiders/User/settings.json"
-! omarchy-toggle-enabled skip-codium-theme-changes && set_theme "codium" "$HOME/.config/VSCodium/User/settings.json"
-! omarchy-toggle-enabled skip-cursor-theme-changes && set_theme "cursor" "$HOME/.config/Cursor/User/settings.json"
+set_theme "code" "$HOME/.config/Code/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-vscode-theme-changes"
+set_theme "codium" "$HOME/.config/VSCodium/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-codium-theme-changes"
+set_theme "cursor" "$HOME/.config/Cursor/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-cursor-theme-changes"
@@ -1,26 +0,0 @@
-#!/bin/bash
-
-# Toggle Omarchy features between enabled and disabled
-
-ENABLED_NOTIFICATION=""
-DISABLED_NOTIFICATION=""
-
-while [[ $# -gt 1 ]]; do
-  case $1 in
-    --enabled-notification) ENABLED_NOTIFICATION="$2"; shift 2 ;;
-    --disabled-notification) DISABLED_NOTIFICATION="$2"; shift 2 ;;
-    *) break ;;
-  esac
-done
-
-FLAG_NAME="$1"
-FLAG="$HOME/.local/state/omarchy/toggles/$FLAG_NAME"
-
-if [[ -f $FLAG ]]; then
-  rm $FLAG
-  [[ -n $DISABLED_NOTIFICATION ]] && notify-send -u low "$DISABLED_NOTIFICATION"
-else
-  mkdir -p "$(dirname $FLAG)"
-  touch $FLAG
-  [[ -n $ENABLED_NOTIFICATION ]] && notify-send -u low "$ENABLED_NOTIFICATION"
-fi
@@ -1,4 +0,0 @@
-#!/bin/bash
-
-# Check if a toggle is enabled (flag file exists)
-[[ -f "$HOME/.local/state/omarchy/toggles/$1" ]]
@@ -2,10 +2,10 @@

 if pgrep -x hypridle >/dev/null; then
  pkill -x hypridle
-  notify-send -u low "󱫖    Stop locking computer when idle"
+  notify-send "󱫖    Stop locking computer when idle"
 else
  uwsm-app -- hypridle >/dev/null 2>&1 &
-  notify-send -u low "󱫖    Now locking computer when idle"
+  notify-send "󱫖    Now locking computer when idle"
 fi

 pkill -RTMIN+9 waybar
@@ -21,10 +21,10 @@ restart_nightlighted_waybar() {

 if [[ $CURRENT_TEMP == $OFF_TEMP ]]; then
  hyprctl hyprsunset temperature $ON_TEMP
-  notify-send -u low "  Nightlight screen temperature"
+  notify-send "  Nightlight screen temperature"
  restart_nightlighted_waybar
 else
  hyprctl hyprsunset temperature $OFF_TEMP
-  notify-send -u low "   Daylight screen temperature"
+  notify-send "   Daylight screen temperature"
  restart_nightlighted_waybar
 fi
@@ -3,9 +3,9 @@
 makoctl mode -t do-not-disturb

 if makoctl mode | grep -q 'do-not-disturb'; then
-  notify-send -u low "󰂛    Silenced notifications"
+  notify-send "󰂛    Silenced notifications"
 else
-  notify-send -u low "󰂚    Enabled notifications"
+  notify-send "󰂚    Enabled notifications"
 fi

 pkill -RTMIN+10 waybar
@@ -1,6 +1,12 @@
 #!/bin/bash

-omarchy-toggle \
-  --enabled-notification "󱄄   Screensaver disabled" \
-  --disabled-notification "󱄄   Screensaver enabled" \
-  screensaver-off
+STATE_FILE=~/.local/state/omarchy/toggles/screensaver-off
+
+if [[ -f $STATE_FILE ]]; then
+  rm -f $STATE_FILE
+  notify-send "󱄄   Screensaver enabled"
+else
+  mkdir -p "$(dirname $STATE_FILE)"
+  touch $STATE_FILE
+  notify-send "󱄄   Screensaver disabled"
+fi
@@ -1,6 +1,12 @@
 #!/bin/bash

-omarchy-toggle \
-  --enabled-notification "󰒲   Suspend removed from system menu" \
-  --disabled-notification "󰒲   Suspend now available in system menu" \
-  suspend-off
+STATE_FILE=~/.local/state/omarchy/toggles/suspend-off
+
+if [[ -f $STATE_FILE ]]; then
+  rm -f $STATE_FILE
+  notify-send "󰒲   Suspend now available in system menu"
+else
+  mkdir -p "$(dirname $STATE_FILE)"
+  touch $STATE_FILE
+  notify-send "󰒲   Suspend removed from system menu"
+fi
@@ -1,7 +1,5 @@
 #!/bin/bash

-omarchy-toggle waybar-off
-
 if pgrep -x waybar >/dev/null; then
  pkill -x waybar
 else
@@ -2,13 +2,6 @@

 set -e

-# Run the update inside a PTY so pacman/yay keep showing download progress
-# while still logging the full session for later analysis.
-if [[ -z $OMARCHY_UPDATE_LOGGED ]]; then
-  script_command=$(printf '%q ' "$0" "$@")
-  exec env OMARCHY_UPDATE_LOGGED=1 script -qefc "$script_command" "/tmp/omarchy-update.log"
-fi
-
 trap 'echo ""; echo -e "\033[0;31mSomething went wrong during the update!\n\nPlease review the output above carefully, correct the error, and retry the update.\n\nIf you need assistance, get help from the community at https://omarchy.org/discord\033[0m"' ERR

 if [[ $1 == "-y" ]] || omarchy-update-confirm; then
@@ -1,8 +1,5 @@
 #!/bin/bash

-# Update system firmware using fwupd. Ensures the fwupd EFI binary is installed
-# in the ESP so UEFI capsule updates work with the Limine bootloader.
-
 set -e
 echo -e "\e[32mUpdate Firmware\e[0m"

@@ -10,9 +7,5 @@ if omarchy-cmd-missing fwupdmgr; then
  omarchy-pkg-add fwupd
 fi

-if [[ -d /sys/firmware/efi ]] && [[ -f /usr/lib/fwupd/efi/fwupdx64.efi ]]; then
-  sudo install -D /usr/lib/fwupd/efi/fwupdx64.efi /boot/EFI/arch/fwupdx64.efi
-fi
-
 fwupdmgr refresh --force
 sudo fwupdmgr update
@@ -6,10 +6,5 @@ echo -e "\e[32mUpdate Omarchy\e[0m"

 omarchy-update-time

-# Suppress Hyprland config errors while git updates default config files mid-pull
-hyprctl keyword debug:suppress_errors true &>/dev/null || true
-
 git -C $OMARCHY_PATH pull --autostash
 git -C $OMARCHY_PATH --no-pager diff --check || git -C $OMARCHY_PATH reset --merge
-
-hyprctl reload &>/dev/null || true
@@ -5,6 +5,10 @@ set -e
 # Ensure screensaver/sleep doesn't set in during updates
 hyprctl dispatch tagwindow +noidle &>/dev/null || true

+# Capture update logs (CLICOLOR_FORCE keeps gum styled when stdout is piped through tee)
+export CLICOLOR_FORCE=1
+exec > >(tee "/tmp/omarchy-update.log") 2>&1
+
 # Perform all update steps
 omarchy-update-keyring
 omarchy-update-available-reset
@@ -11,9 +11,6 @@ if gum confirm "Install Voxtype + AI model (~150MB) to enable dictation?"; then
  cp $OMARCHY_PATH/default/voxtype/config.toml ~/.config/voxtype/

  voxtype setup --download --no-post-install
-  if omarchy-hw-vulkan; then
-    voxtype setup gpu --enable || true
-  fi
  voxtype setup systemd

  omarchy-restart-waybar
@@ -8,7 +8,7 @@
  --light-header-color: #dbdbdb; /* H1-H3 */
  --select-text-bg-color: #186a9a;
  --accent-color: #4f525a;
-  --background-color: #000000;
+  --background-color: #101010;
  --font-color: #bbbcbc;
  --header-color: #bebebe; /* H4-H6 */
  --border-color: #232629;
@@ -1,2 +0,0 @@
-[Desktop Entry]
-Hidden=true
@@ -1,18 +1,18 @@
-#? Config file for btop v.1.4.6
+#? Config file for btop

 #* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
 #* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
 color_theme = "current"

 #* If the theme set background should be shown, set to False if you want terminal background transparency.
-theme_background = true
+theme_background = True

 #* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
-truecolor = true
+truecolor = True

 #* Set to true to force tty mode regardless if a real tty has been detected or not.
 #* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
-force_tty = false
+force_tty = False

 #* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
 #* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
@@ -22,13 +22,10 @@ presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:defaul

 #* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
 #* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
-vim_keys = true
+vim_keys = True

 #* Rounded corners on boxes, is ignored if TTY mode is ON.
-rounded_corners = true
-
-#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
-terminal_sync = true
+rounded_corners = True

 #* Default symbols to use for graph creation, "braille", "block" or "tty".
 #* "braille" offers the highest resolution but might not be included in all fonts.
@@ -63,40 +60,37 @@ update_ms = 2000
 proc_sorting = "cpu lazy"

 #* Reverse sorting order, True or False.
-proc_reversed = false
+proc_reversed = False

 #* Show processes as a tree.
-proc_tree = false
+proc_tree = False

 #* Use the cpu graph colors in the process list.
-proc_colors = true
+proc_colors = True

 #* Use a darkening gradient in the process list.
-proc_gradient = true
+proc_gradient = True

 #* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
-proc_per_core = false
+proc_per_core = False

 #* Show process memory as bytes instead of percent.
-proc_mem_bytes = true
+proc_mem_bytes = True

 #* Show cpu graph for each process.
-proc_cpu_graphs = true
+proc_cpu_graphs = True

 #* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
-proc_info_smaps = false
+proc_info_smaps = False

 #* Show proc box on left side of screen instead of right.
-proc_left = false
+proc_left = False

 #* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
-proc_filter_kernel = false
+proc_filter_kernel = False

 #* In tree-view, always accumulate child process resources in the parent process.
-proc_aggregate = false
-
-#* Should cpu and memory usage display be preserved for dead processes when paused.
-keep_dead_proc_usage = false
+proc_aggregate = False

 #* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
 #* Select from a list of detected attributes from the options menu.
@@ -110,28 +104,25 @@ cpu_graph_lower = "Auto"
 show_gpu_info = "Auto"

 #* Toggles if the lower CPU graph should be inverted.
-cpu_invert_lower = true
+cpu_invert_lower = True

 #* Set to True to completely disable the lower CPU graph.
-cpu_single_graph = false
+cpu_single_graph = False

 #* Show cpu box at bottom of screen instead of top.
-cpu_bottom = false
+cpu_bottom = False

 #* Shows the system uptime in the CPU box.
-show_uptime = true
-
-#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
-show_cpu_watts = true
+show_uptime = True

 #* Show cpu temperature.
-check_temp = true
+check_temp = True

 #* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
 cpu_sensor = "Auto"

 #* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
-show_coretemp = true
+show_coretemp = True

 #* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
 #* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
@@ -143,66 +134,63 @@ cpu_core_map = ""
 temp_scale = "celsius"

 #* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
-base_10_sizes = false
+base_10_sizes = False

 #* Show CPU frequency.
-show_cpu_freq = true
-
-#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
-freq_mode = "first"
+show_cpu_freq = True

 #* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
 #* Special formatting: /host = hostname | /user = username | /uptime = system uptime
 clock_format = "%X"

 #* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
-background_update = true
+background_update = True

 #* Custom cpu model name, empty string to disable.
 custom_cpu_name = ""

 #* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
-#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
+#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
 disks_filter = ""

 #* Show graphs instead of meters for memory values.
-mem_graphs = true
+mem_graphs = True

 #* Show mem box below net box instead of above.
-mem_below_net = false
+mem_below_net = False

 #* Count ZFS ARC in cached and available memory.
-zfs_arc_cached = true
+zfs_arc_cached = True

 #* If swap memory should be shown in memory box.
-show_swap = true
+show_swap = True

 #* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
-swap_disk = true
+swap_disk = True

 #* If mem box should be split to also show disks info.
-show_disks = true
+show_disks = True

 #* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
-only_physical = true
+only_physical = True

 #* Read disks list from /etc/fstab. This also disables only_physical.
-use_fstab = true
+use_fstab = True

 #* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
-zfs_hide_datasets = false
+zfs_hide_datasets = False

 #* Set to true to show available disk space for privileged users.
-disk_free_priv = false
+disk_free_priv = False

 #* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
-show_io_stat = true
+show_io_stat = True

 #* Toggles io mode for disks, showing big graphs for disk read/write speeds.
-io_mode = false
+io_mode = False

 #* Set to True to show combined read/write io graphs in io mode.
-io_graph_combined = false
+io_graph_combined = False

 #* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
 #* Example: "/mnt/media:100 /:20 /boot:1".
@@ -214,44 +202,29 @@ net_download = 100
 net_upload = 100

 #* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
-net_auto = true
+net_auto = True

 #* Sync the auto scaling for download and upload to whichever currently has the highest scale.
-net_sync = true
+net_sync = True

 #* Starts with the Network Interface specified here.
 net_iface = ""

-#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
-base_10_bitrate = "Auto"
-
 #* Show battery stats in top right if battery is present.
-show_battery = true
+show_battery = True

 #* Which battery to use if multiple are present. "Auto" for auto detection.
 selected_battery = "Auto"

-#* Show power stats of battery next to charge indicator.
-show_battery_watts = true
-
-#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
 #* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
 log_level = "WARNING"

-#* Automatically save current settings to config file on exit.
-save_config_on_exit = true
-
 #* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
-nvml_measure_pcie_speeds = true
-
-#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
-rsmi_measure_pcie_speeds = true
+nvml_measure_pcie_speeds = True

 #* Horizontally mirror the GPU graph.
-gpu_mirror_graph = true
-
-#* Set which GPU vendors to show. Available values are "nvidia amd intel"
-shown_gpus = "nvidia amd intel"
+gpu_mirror_graph = True

 #* Custom gpu0 model name, empty string to disable.
 custom_gpu_name0 = ""
@@ -270,3 +243,4 @@ custom_gpu_name4 = ""

 #* Custom gpu5 model name, empty string to disable.
 custom_gpu_name5 = ""
+
@@ -32,8 +32,3 @@ bindd = SUPER SHIFT ALT, X, X Post, exec, omarchy-launch-webapp "https://x.com/c
 # Overwrite existing bindings, like putting Omarchy Menu on Super + Space
 # unbind = SUPER, SPACE
 # bindd = SUPER, SPACE, Omarchy menu, exec, omarchy-menu
-
-# Logitech MX Keys
-# bind = SUPER SHIFT, S, exec, omarchy-cmd-screenshot          # Print Screen Button
-# bind = SUPER, H, exec, voxtype record toggle                 # Dictation Button
-# bind = SUPER, PERIOD, exec, omarchy-launch-walker -m symbols # Emoji Button
@@ -19,8 +19,5 @@ source = ~/.config/hypr/bindings.conf
 source = ~/.config/hypr/looknfeel.conf
 source = ~/.config/hypr/autostart.conf

-# Toggle config flags dynamically
-source = ~/.local/state/omarchy/toggles/hypr/*.conf
-
 # Add any other personal Hyprland configuration below
 # windowrule = workspace 5, match:class qemu
@@ -11,7 +11,7 @@ input {

  # Change speed of keyboard repeat
  repeat_rate = 40
-  repeat_delay = 250
+  repeat_delay = 600

  # Start with numlock on by default
  numlock_by_default = true
@@ -21,6 +21,3 @@ monitor=,preferred,auto,auto
 # Example for Framework 13 w/ 6K XDR Apple display
 # monitor = DP-5, 6016x3384@60, auto, 2
 # monitor = eDP-1, 2880x1920@120, auto, 2
-
-# Disable the second ghost monitor on an Apple 6K XDR over Thunderbolt
-# monitor=DP-2,disable
@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.

 # Example: Show the name of the theme that was just set.
-# notify-send -u low "New font" "Your new font is $1"
+# notify-send "New font" "Your new font is $1"
@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.

 # Example: Show notification after the system has been updated.
-# notify-send -u low "Update Performed" "Your system is now up to date"
+# notify-send "Update Performed" "Your system is now up to date"
@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.

 # Example: Show the name of the theme that was just set.
-# notify-send -u low "New theme" "Your new theme is $1"
+# notify-send "New theme" "Your new theme is $1"
@@ -72,8 +72,8 @@
    "format-wifi": "{icon}",
    "format-ethernet": "󰀂",
    "format-disconnected": "󰤮",
-    "tooltip-format-wifi": "{essid} ({frequency} GHz)",
-    "tooltip-format-ethernet": "Connected",
+    "tooltip-format-wifi": "{essid} ({frequency} GHz)\n⇣{bandwidthDownBytes}  ⇡{bandwidthUpBytes}",
+    "tooltip-format-ethernet": "⇣{bandwidthDownBytes}  ⇡{bandwidthUpBytes}",
    "tooltip-format-disconnected": "Disconnected",
    "interval": 3,
    "spacing": 1,
@@ -13,31 +13,23 @@ img2jpg() {
  img="$1"
  shift

-  magick "$img" "$@" -quality 85 -strip "${img%.*}-converted.jpg"
+  magick "$img" "$@" -quality 95 -strip "${img%.*}-converted.jpg"
 }

-# Transcode any image to a small JPG (max 1080px wide)
+# Transcode any image to a small JPG (max 1080px wide) that's great for sharing online
 img2jpg-small() {
  img="$1"
  shift

-  magick "$img" "$@" -resize 1080x\> -quality 85 -strip "${img%.*}-small.jpg"
+  magick "$img" "$@" -resize 1080x\> -quality 95 -strip "${img%.*}-small.jpg"
 }

-# Transcode any image to a 4K JPG (max 2160px wide)
+# Transcode any image to a medium JPG (max 1800px wide) that's great for sharing online
 img2jpg-medium() {
  img="$1"
  shift

-  magick "$img" "$@" -resize 2160x\> -quality 85 -strip "${img%.*}-medium.jpg"
-}
-
-# Transcode any image to a 6K JPG (max 3160px wide)
-img2jpg-large() {
-  img="$1"
-  shift
-
-  magick "$img" "$@" -resize 3160x\> -quality 85 -strip "${img%.*}-large.jpg"
+  magick "$img" "$@" -resize 1800x\> -quality 95 -strip "${img%.*}-medium.jpg"
 }

 # Transcode any image to compressed-but-lossless PNG
@@ -7,11 +7,11 @@ ga() {

  local branch="$1"
  local base="$(basename "$PWD")"
-  local wt_path="../${base}--${branch}"
+  local path="../${base}--${branch}"

-  git worktree add -b "$branch" "$wt_path"
-  mise trust "$wt_path"
-  cd "$wt_path"
+  git worktree add -b "$branch" "$path"
+  mise trust "$path"
+  cd "$path"
 }

 # Remove worktree and branch from within active worktree directory.
@@ -2,7 +2,7 @@ if command -v mise &> /dev/null; then
  eval "$(mise activate bash)"
 fi

-if [[ $- == *i* ]] && [[ ${TERM:-} != "dumb" ]] && command -v starship &> /dev/null; then
+if command -v starship &> /dev/null; then
  eval "$(starship init bash)"
 fi

@@ -3,6 +3,7 @@ source = ~/.local/share/omarchy/default/hypr/apps/1password.conf
 source = ~/.local/share/omarchy/default/hypr/apps/bitwarden.conf
 source = ~/.local/share/omarchy/default/hypr/apps/browser.conf
 source = ~/.local/share/omarchy/default/hypr/apps/hyprshot.conf
+source = ~/.local/share/omarchy/default/hypr/apps/jetbrains.conf
 source = ~/.local/share/omarchy/default/hypr/apps/localsend.conf
 source = ~/.local/share/omarchy/default/hypr/apps/pip.conf
 source = ~/.local/share/omarchy/default/hypr/apps/qemu.conf
@@ -0,0 +1,41 @@
+# Fix splash screen showing in weird places and prevent annoying focus takeovers
+windowrule {
+    name = jetbrains-splash
+    match:class = ^(jetbrains-.*)$
+    match:title = ^(splash)$
+    match:float = 1
+    tag = +jetbrains-splash
+    center = on
+    no_focus = on
+    border_size = 0
+}
+
+# Center popups/find windows
+windowrule {
+    name = jetbrains-popup
+    match:class = ^(jetbrains-.*)
+    match:title = ^(| )$
+    match:float = 1
+    tag = +jetbrains
+    center = on
+    # Enabling this makes it possible to provide input in popup dialogs (search window, new file, etc.)
+    stay_focused = on
+    border_size = 0
+    min_size = (monitor_w*0.5) (monitor_h*0.5)
+  }
+
+# Disable window flicker when autocomplete or tooltips appear
+windowrule {
+    name = jetbrains-tooltip
+    match:class = ^(jetbrains-.*)$
+    match:title = ^(win.*)$
+    match:float = 1
+    no_initial_focus = on
+}
+
+# Disable mouse focus
+windowrule {
+    name = jetbrains-focus
+    no_follow_mouse = on
+    match:class = ^(jetbrains-.*)$
+}
@@ -1,14 +1,11 @@
 exec-once = uwsm-app -- hypridle
 exec-once = uwsm-app -- mako
-exec-once = ! omarchy-toggle-enabled waybar-off && uwsm-app -- waybar
+exec-once = uwsm-app -- waybar
 exec-once = uwsm-app -- fcitx5 --disable notificationitem
 exec-once = uwsm-app -- swaybg -i ~/.config/omarchy/current/background -m fill
 exec-once = uwsm-app -- swayosd-server
 exec-once = /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
 exec-once = omarchy-cmd-first-run
-exec-once = omarchy-powerprofiles-init
-exec-once = omarchy-hyprland-monitor-internal-recover
-exec-once = uwsm-app -- omarchy-hyprland-monitor-watch

 # Slow app launch fix -- set systemd vars
 exec-once = systemctl --user import-environment $(env | cut -d'=' -f 1)
@@ -1,11 +1,11 @@
 # Only display the OSD on the currently focused monitor
-$osdclient = swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)"
+$osdclient = swayosd-client --monitor "$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"

 # Laptop multimedia keys for volume and LCD brightness (with OSD)
 bindeld = ,XF86AudioRaiseVolume, Volume up, exec, $osdclient --output-volume raise
 bindeld = ,XF86AudioLowerVolume, Volume down, exec, $osdclient --output-volume lower
 bindeld = ,XF86AudioMute, Mute, exec, $osdclient --output-volume mute-toggle
-bindeld = ,XF86AudioMicMute, Mute microphone, exec, omarchy-cmd-mic-mute
+bindeld = ,XF86AudioMicMute, Mute microphone, exec, $osdclient --input-volume mute-toggle
 bindeld = ,XF86MonBrightnessUp, Brightness up, exec, omarchy-brightness-display +5%
 bindeld = ,XF86MonBrightnessDown, Brightness down, exec, omarchy-brightness-display 5%-
 bindeld = ,XF86KbdBrightnessUp, Keyboard brightness up, exec, omarchy-brightness-keyboard up
@@ -4,7 +4,6 @@ bindd = SUPER CTRL, E, Emoji picker, exec, omarchy-launch-walker -m symbols
 bindd = SUPER CTRL, C, Capture menu, exec, omarchy-menu capture
 bindd = SUPER CTRL, O, Toggle menu, exec, omarchy-menu toggle
 bindd = SUPER ALT, SPACE, Omarchy menu, exec, omarchy-menu
-bindd = SUPER SHIFT, code:201, Omarchy menu, exec, omarchy-menu
 bindd = SUPER, ESCAPE, System menu, exec, omarchy-menu system
 bindld = , XF86PowerOff, Power menu, exec, omarchy-menu system
 bindd = SUPER, K, Show key bindings, exec, omarchy-menu-keybindings
@@ -14,7 +13,7 @@ bindd = , XF86Calculator, Calculator, exec, gnome-calculator
 bindd = SUPER SHIFT, SPACE, Toggle top bar, exec, omarchy-toggle-waybar
 bindd = SUPER CTRL, SPACE, Theme background menu, exec, omarchy-menu background
 bindd = SUPER SHIFT CTRL, SPACE, Theme menu, exec, omarchy-menu theme
-bindd = SUPER, BACKSPACE, Toggle window transparency, exec, omarchy-hyprland-active-window-transparency-toggle
+bindd = SUPER, BACKSPACE, Toggle window transparency, exec, hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle
 bindd = SUPER SHIFT, BACKSPACE, Toggle window gaps, exec, omarchy-hyprland-window-gaps-toggle
 bindd = SUPER CTRL, BACKSPACE, Toggle single-window square aspect, exec, omarchy-hyprland-window-single-square-aspect-toggle

@@ -28,9 +27,6 @@ bindd = SUPER SHIFT ALT, COMMA, Restore last notification, exec, makoctl restore
 # Toggles
 bindd = SUPER CTRL, I, Toggle locking on idle, exec, omarchy-toggle-idle
 bindd = SUPER CTRL, N, Toggle nightlight, exec, omarchy-toggle-nightlight
-bindd = SUPER CTRL, Delete, Toggle laptop display, exec, omarchy-hyprland-monitor-internal-toggle
-bindl = , switch:on:Lid Switch, exec, omarchy-hyprland-monitor-internal-disable
-bindl = , switch:off:Lid Switch, exec, omarchy-hyprland-monitor-internal-enable

 # Control Apple Display brightness
 bindd = CTRL, F1, Apple Display brightness down, exec, omarchy-brightness-display-apple -5000
@@ -46,8 +42,8 @@ bindd = SUPER, PRINT, Color picker, exec, pkill hyprpicker || hyprpicker -a
 bindd = SUPER CTRL, S, Share, exec, omarchy-menu share

 # Waybar-less information
-bindd = SUPER CTRL ALT, T, Show time, exec, notify-send -u low "    $(date +"%A %H:%M  ·  %d %B %Y  ·  Week %V")"
-bindd = SUPER CTRL ALT, B, Show battery remaining, exec, notify-send -u low "$(omarchy-battery-status)"
+bindd = SUPER CTRL ALT, T, Show time, exec, notify-send "    $(date +"%A %H:%M  —  %d %B W%V %Y")"
+bindd = SUPER CTRL ALT, B, Show battery remaining, exec, notify-send "$(omarchy-battery-status)"

 # Control panels
 bindd = SUPER CTRL, A, Audio controls, exec, omarchy-launch-audio
@@ -91,7 +91,7 @@ animations {

    animation = global, 1, 10, default
    animation = border, 1, 5.39, easeOutQuint
-    animation = windows, 1, 3.79, easeOutQuint
+    animation = windows, 1, 4.79, easeOutQuint
    animation = windowsIn, 1, 4.1, easeOutQuint, popin 87%
    animation = windowsOut, 1, 1.49, linear, popin 87%
    animation = fadeIn, 1, 1.73, almostLinear
@@ -103,7 +103,7 @@ animations {
    animation = fadeLayersIn, 1, 1.79, almostLinear
    animation = fadeLayersOut, 1, 1.39, almostLinear
    animation = workspaces, 0, 0, ease
-    animation = specialWorkspace, 1, 3, easeOutQuint, slidevert
+    animation = specialWorkspace, 1, 4, easeOutQuint, slidevert
 }

 # See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
@@ -122,7 +122,6 @@ master {
 misc {
    disable_hyprland_logo = true
    disable_splash_rendering  = true
-    disable_scale_notification = true
    focus_on_activate = true
    anr_missed_pings = 3
    on_focus_under_fullscreen = 1
@@ -1,2 +0,0 @@
-# This directory is intended for permanent config toggle flags.
-# Do not remove this file (as the directory always needs at least one file).
@@ -1,2 +0,0 @@
-# Disable the internal laptop monitor
-monitor=eDP-1,disable
@@ -1,5 +0,0 @@
-# Avoid overly wide single-window layouts on wide screens
-layout {
-    single_window_aspect_ratio = 1 1
-}
-
@@ -1,6 +0,0 @@
-# Remove all window gaps and borders
-general {
-    gaps_out = 0
-    gaps_in = 0
-    border_size = 0
-}
@@ -2,7 +2,7 @@ TARGET_OS_NAME="Omarchy"

 ESP_PATH="/boot"

-KERNEL_CMDLINE[default]+="@@CMDLINE@@"
+KERNEL_CMDLINE[default]="@@CMDLINE@@"
 KERNEL_CMDLINE[default]+=" quiet splash"

 ENABLE_UKI=yes
@@ -0,0 +1,7 @@
+# Run omarchy-restart-makima after any changes
+
+[remap]
+KEY_LEFTMETA-KEY_LEFTSHIFT-KEY_F23 = ["KEY_LEFTMETA", "KEY_LEFTALT", "KEY_SPACE"]
+
+[settings]
+GRAB_DEVICE = "true"
@@ -1,84 +0,0 @@
-import os
-import shutil
-
-from gi import require_version
-
-require_version("Nautilus", "4.1")
-
-from gi.repository import GObject, Gio, Nautilus
-
-
-class SendViaLocalSendAction(GObject.GObject, Nautilus.MenuProvider):
-    def _launch_localsend(self, paths):
-        command = self._resolve_command()
-        if not command:
-            return
-
-        if command[-1] == "@@":
-            command = command + paths + ["@@"]
-        else:
-            command = command + paths
-
-        Gio.Subprocess.new(command, Gio.SubprocessFlags.NONE)
-
-    def _resolve_command(self):
-        localsend = shutil.which("localsend")
-        if localsend:
-            return [localsend, "--headless", "send"]
-
-        flatpak = shutil.which("flatpak")
-        if flatpak and self._has_flatpak_app(flatpak, "org.localsend.localsend_app"):
-            return [
-                flatpak,
-                "run",
-                "--file-forwarding",
-                "org.localsend.localsend_app",
-                "@@",
-            ]
-
-        return None
-
-    def _has_flatpak_app(self, flatpak, app_id):
-        process = Gio.Subprocess.new(
-            [flatpak, "info", app_id],
-            Gio.SubprocessFlags.STDOUT_SILENCE | Gio.SubprocessFlags.STDERR_SILENCE,
-        )
-        return process.wait_check()
-
-    def _selected_paths(self, files):
-        paths = []
-
-        for file in files:
-            location = file.get_location()
-            if not location:
-                continue
-
-            path = location.get_path()
-            if path and path not in paths:
-                paths.append(path)
-
-        return paths
-
-    def _make_item(self, paths):
-        label = (
-            "Send via LocalSend" if len(paths) == 1 else "Send selected via LocalSend"
-        )
-        item = Nautilus.MenuItem(
-            name="LocalSendNautilus::send_via_localsend",
-            label=label,
-            icon="localsend",
-        )
-        item.connect("activate", self._on_activate, paths)
-        return item
-
-    def _on_activate(self, _menu, paths):
-        self._launch_localsend(paths)
-
-    def get_file_items(self, *args):
-        files = args[0] if len(args) == 1 else args[1]
-        paths = self._selected_paths(files)
-
-        if not paths or not self._resolve_command():
-            return []
-
-        return [self._make_item(paths)]
@@ -29,4 +29,5 @@ if [[ $1 == "post" ]]; then
      fi
    done
  ) &
+  disown
 fi
@@ -25,9 +25,6 @@ sample_rate = 16000
 # Maximum recording duration in seconds (safety limit)
 max_duration_secs = 60

-# Pause MPRIS media players during recording
-pause_media = true
-
 # [audio.feedback]
 # Enable audio feedback sounds (beeps when recording starts/stops)
 # enabled = true
@@ -14,7 +14,7 @@ run_logged $OMARCHY_INSTALL/config/mise-work.sh
 run_logged $OMARCHY_INSTALL/config/fix-powerprofilesctl-shebang.sh
 run_logged $OMARCHY_INSTALL/config/docker.sh
 run_logged $OMARCHY_INSTALL/config/mimetypes.sh
-run_logged $OMARCHY_INSTALL/config/nautilus-python.sh
+run_logged $OMARCHY_INSTALL/config/remove-fcitx5-autostart.sh
 run_logged $OMARCHY_INSTALL/config/localdb.sh
 run_logged $OMARCHY_INSTALL/config/walker-elephant.sh
 run_logged $OMARCHY_INSTALL/config/fast-shutdown.sh
@@ -22,12 +22,10 @@ run_logged $OMARCHY_INSTALL/config/unmount-fuse.sh
 run_logged $OMARCHY_INSTALL/config/sudoless-asdcontrol.sh
 run_logged $OMARCHY_INSTALL/config/input-group.sh
 run_logged $OMARCHY_INSTALL/config/omarchy-ai-skill.sh
-run_logged $OMARCHY_INSTALL/config/omarchy-toggles.sh
 run_logged $OMARCHY_INSTALL/config/kernel-modules-hook.sh
 run_logged $OMARCHY_INSTALL/config/powerprofilesctl-rules.sh
 run_logged $OMARCHY_INSTALL/config/wifi-powersave-rules.sh
 run_logged $OMARCHY_INSTALL/config/plocate-ac-only.sh
-
 run_logged $OMARCHY_INSTALL/config/hardware/network.sh
 run_logged $OMARCHY_INSTALL/config/hardware/set-wireless-regdom.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-fkeys.sh
@@ -36,29 +34,21 @@ run_logged $OMARCHY_INSTALL/config/hardware/printer.sh
 run_logged $OMARCHY_INSTALL/config/hardware/usb-autosuspend.sh
 run_logged $OMARCHY_INSTALL/config/hardware/ignore-power-button.sh
 run_logged $OMARCHY_INSTALL/config/hardware/nvidia.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel-thermald.sh
 run_logged $OMARCHY_INSTALL/config/hardware/vulkan.sh
-
-run_logged $OMARCHY_INSTALL/config/hardware/intel/video-acceleration.sh
-run_logged $OMARCHY_INSTALL/config/hardware/intel/lpmd.sh
-run_logged $OMARCHY_INSTALL/config/hardware/intel/thermald.sh
-run_logged $OMARCHY_INSTALL/config/hardware/intel/ipu7-camera.sh
-run_logged $OMARCHY_INSTALL/config/hardware/intel/ptl-kernel.sh
-run_logged $OMARCHY_INSTALL/config/hardware/intel/fix-wifi7-eht.sh
-
-run_logged $OMARCHY_INSTALL/config/hardware/dell/fix-xps-haptic-touchpad.sh
-
-run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-audio-mixer.sh
-run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-mic.sh
-
-run_logged $OMARCHY_INSTALL/config/hardware/framework/fix-f13-amd-audio-input.sh
-run_logged $OMARCHY_INSTALL/config/hardware/framework/qmk-hid.sh
-
-run_logged $OMARCHY_INSTALL/config/hardware/apple/fix-spi-keyboard.sh
-run_logged $OMARCHY_INSTALL/config/hardware/apple/fix-suspend-nvme.sh
-run_logged $OMARCHY_INSTALL/config/hardware/apple/fix-t2.sh
-
+run_logged $OMARCHY_INSTALL/config/hardware/fix-intel-panther-lake-display.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-f13-amd-audio-input.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-bcm43xx.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-spi-keyboard.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-suspend-nvme.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-t2.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-surface-keyboard.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-asus-rog-audio-mixer.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-asus-rog-mic.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-yt6801-ethernet-adapter.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-dell-xps-audio.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-synaptic-touchpad.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-tuxedo-backlight.sh
+run_logged $OMARCHY_INSTALL/config/hardware/framework16-qmk-hid.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel-ipu7-camera.sh
@@ -1,36 +0,0 @@
-# Fix Dell XPS haptic touchpad.
-# The Synaptics haptic touchpad (vendor 06CB) uses the HID Manual Trigger
-# protocol, but the kernel's HID haptic subsystem only supports Auto Trigger.
-# This sets up a lightweight daemon that monitors touchpad button events and
-# sends haptic pulses via HID feature reports on the hidraw device.
-# Also disables I2C runtime PM to prevent the haptic engine losing state
-# across suspend/resume.
-
-if omarchy-hw-match "XPS" \
-  && ls /sys/bus/i2c/devices/i2c-VEN_06CB:00 2>/dev/null; then
-
-  # Keep I2C controller power on to prevent haptic engine losing state
-  sudo tee /etc/udev/rules.d/99-dell-xps-haptic-touchpad.rules << 'EOF'
-ACTION=="add", SUBSYSTEM=="pci", KERNEL=="0000:00:19.0", ATTR{power/control}="on"
-ACTION=="add", SUBSYSTEM=="platform", KERNEL=="i2c_designware.0", ATTR{power/control}="on"
-EOF
-  sudo udevadm control --reload-rules
-
-  # Haptic feedback daemon as a systemd service
-  sudo tee /etc/systemd/system/dell-xps-haptic-touchpad.service << SVC
-[Unit]
-Description=Dell XPS haptic touchpad feedback
-After=systemd-udev-settle.service
-
-[Service]
-Type=simple
-ExecStart=$OMARCHY_PATH/bin/omarchy-haptic-touchpad
-Restart=on-failure
-RestartSec=2
-
-[Install]
-WantedBy=multi-user.target
-SVC
-  sudo systemctl daemon-reload
-  sudo systemctl enable dell-xps-haptic-touchpad.service
-fi
@@ -19,7 +19,6 @@ if lspci -nn | grep -q "106b:180[12]"; then
  sudo systemctl enable tiny-dfr.service

  echo "apple-bce" | sudo tee /etc/modules-load.d/t2.conf >/dev/null
-  echo "hci_bcm4377" | sudo tee -a /etc/modules-load.d/t2.conf >/dev/null

  echo "MODULES+=(apple-bce usbhid hid_apple hid_generic xhci_pci xhci_hcd)" | sudo tee /etc/mkinitcpio.conf.d/apple-t2.conf >/dev/null

@@ -32,13 +31,5 @@ EOF
  cat <<EOF | sudo tee /etc/limine-entry-tool.d/t2-mac.conf >/dev/null
 # Generated by Omarchy installer for T2 Mac support
 KERNEL_CMDLINE[default]+=" intel_iommu=on iommu=pt pcie_ports=compat"
-EOF
-
-  cat <<EOF | sudo tee /etc/t2fand.conf >/dev/null
-[Fan1]
-low_temp=55
-high_temp=75
-speed_curve=linear
-always_full_speed=false
 EOF
 fi
--- a/Show More
+++ b/Show More