Merge pull request #5388 from basecamp/rc

Omarchy 3.6.0

bin/omarchy-cmd-audio-switch

@@ -2,15 +2,11 @@
 
 # Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.
 
-focused_monitor=$(omarchy-hyprland-monitor-focused)
-
 sinks=$(pactl -f json list sinks | jq '[.[] | select((.ports | length == 0) or ([.ports[]? | .availability != "not available"] | any))]')
 sinks_count=$(echo "$sinks" | jq '. | length')
 
 if (( sinks_count == 0 )); then
-  swayosd-client \
-    --monitor "$focused_monitor" \
-    --custom-message "No audio devices found"
+  omarchy-swayosd-client --custom-message "No audio devices found"
   exit 1
 fi
 
@@ -57,10 +53,10 @@ fi
 next_sink_volume_icon="sink-volume-${icon_state}-symbolic"
 
 if [[ $next_sink_name != $current_sink_name ]]; then
-  pactl set-default-sink "$next_sink_name"
+  next_sink_wpid=$(echo "$next_sink" | jq -r '.properties."object.id"')
+  wpctl set-default "$next_sink_wpid"
 fi
 
-swayosd-client \
-  --monitor "$focused_monitor" \
+omarchy-swayosd-client \
   --custom-message "$next_sink_description" \
   --custom-icon "$next_sink_volume_icon"

bin/omarchy-cmd-first-run

@@ -10,6 +10,7 @@ if [[ -f $FIRST_RUN_MODE ]]; then
   rm -f "$FIRST_RUN_MODE"
 
   bash "$OMARCHY_PATH/install/first-run/battery-monitor.sh"
+  bash "$OMARCHY_PATH/install/first-run/recover-internal-monitor.sh"
   bash "$OMARCHY_PATH/install/first-run/cleanup-reboot-sudoers.sh"
   bash "$OMARCHY_PATH/install/first-run/firewall.sh"
   bash "$OMARCHY_PATH/install/first-run/dns-resolver.sh"

bin/omarchy-cmd-mic-mute

@@ -1,9 +1,11 @@
 #!/bin/bash
 
-# Toggle microphone mute. Dell XPS systems get special handling for the hardware LED.
+# Toggle microphone mute. Dell XPS and ThinkPad systems get special handling for the hardware LED.
 
 if omarchy-hw-match "XPS"; then
   omarchy-cmd-mic-mute-xps
+elif omarchy-hw-match "ThinkPad"; then
+  omarchy-cmd-mic-mute-thinkpad
 else
-  swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)" --input-volume mute-toggle
+  omarchy-swayosd-client --input-volume mute-toggle
 fi

bin/omarchy-cmd-mic-mute-thinkpad

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+# Toggle microphone mute on ThinkPad systems. Uses wpctl for reliable toggling
+# and syncs the platform::micmute LED via brightnessctl.
+
+wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
+
+if pactl get-source-mute @DEFAULT_SOURCE@ | grep -q 'yes'; then
+  osd_message='Microphone muted'
+  osd_icon='microphone-sensitivity-muted-symbolic'
+  led_value=1
+else
+  osd_message='Microphone on'
+  osd_icon='audio-input-microphone-symbolic'
+  led_value=0
+fi
+
+brightnessctl --device="platform::micmute" set "$led_value" >/dev/null 2>&1 || true
+
+swayosd-client \
+  --monitor "$(omarchy-hyprland-monitor-focused)" \
+  --custom-message "$osd_message" \
+  --custom-icon "$osd_icon"

bin/omarchy-cmd-mic-mute-xps

@@ -38,7 +38,6 @@ if [[ -e /sys/class/leds/platform::micmute/brightness ]]; then
   done
 fi
 
-swayosd-client \
-  --monitor "$(omarchy-hyprland-monitor-focused)" \
+omarchy-swayosd-client \
   --custom-message "$osd_message" \
   --custom-icon "$osd_icon"

bin/omarchy-cmd-screenrecord

@@ -134,7 +134,7 @@ stop_screenrecording() {
     pkill -9 -f "^gpu-screen-recorder"
     notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
   else
-    trim_first_frame
+    finalize_recording
     local filename=$(cat "$RECORDING_FILE" 2>/dev/null)
     local preview="${filename%.mp4}-preview.png"
 
@@ -159,17 +159,24 @@ screenrecording_active() {
   pgrep -f "^gpu-screen-recorder" >/dev/null
 }
 
-trim_first_frame() {
+finalize_recording() {
   local latest
   latest=$(cat "$RECORDING_FILE" 2>/dev/null)
+  [[ -f $latest ]] || return
 
-  if [[ -n $latest && -f $latest ]]; then
-    local trimmed="${latest%.mp4}-trimmed.mp4"
-    if ffmpeg -y -ss 0.1 -i "$latest" -c copy "$trimmed" -loglevel quiet 2>/dev/null; then
-      mv "$trimmed" "$latest"
-    else
-      rm -f "$trimmed"
-    fi
+  # Trim the first frame, and normalize audio to -14 LUFS if present, in a single pass
+  local args=(-y -ss 0.1 -i "$latest")
+  if ffprobe -v error -select_streams a -show_entries stream=codec_type -of csv=p=0 "$latest" 2>/dev/null | grep -q audio; then
+    args+=(-af loudnorm=I=-14:TP=-1.5:LRA=11 -c:v copy)
+  else
+    args+=(-c copy)
+  fi
+
+  local processed="${latest%.mp4}-processed.mp4"
+  if ffmpeg "${args[@]}" "$processed" -loglevel quiet 2>/dev/null; then
+    mv "$processed" "$latest"
+  else
+    rm -f "$processed"
   fi
 }
 

bin/omarchy-hw-external-monitors

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# Returns true when an external monitor is physically connected.
+# Uses kernel DRM state so the result is independent of Hyprland's startup timing.
+
+for status in /sys/class/drm/card*-*/status; do
+  [[ "$status" == *-eDP-*/status ]] && continue
+  [[ "$(<"$status")" == "connected" ]] && exit 0
+done
+exit 1

bin/omarchy-hw-hybrid-gpu

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+(($(lspci | grep -cE 'VGA|3D|Display') >= 2))

bin/omarchy-hw-match

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# Match against the computer's DMI product name (case-insensitive).
-# Usage: omarchy-hw-match "XPS"
+# Match against the computer's DMI product name or product family (case-insensitive).
+# Usage: omarchy-hw-match "XPS" or omarchy-hw-match "ThinkPad"
 
-grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null
+grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null ||
+grep -qi "$1" /sys/class/dmi/id/product_family 2>/dev/null

bin/omarchy-hw-recover-internal-monitor

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+# Clear the internal-monitor-disable toggle if no external display is connected.
+# Runs before the graphical session so Hyprland doesn't block on having no output
+# to render to when the user rebooted with the external unplugged.
+
+TOGGLE="$HOME/.local/state/omarchy/toggles/hypr/internal-monitor-disable.conf"
+
+if [[ -f $TOGGLE ]] && ! omarchy-hw-external-monitors; then
+  rm -f "$TOGGLE"
+fi

bin/omarchy-hw-touchpad

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+device=$(hyprctl devices -j | jq -r '[.mice[] | .name | select(test("touchpad|trackpad"; "i"))] | first // empty')
+[[ -n $device ]] && echo "$device"

bin/omarchy-hyprland-monitor-internal

@@ -0,0 +1,37 @@
+#!/bin/bash
+
+TOGGLE="internal-monitor-disable"
+
+enable() {
+  if omarchy-hyprland-toggle-enabled "$TOGGLE"; then
+    omarchy-hyprland-toggle --disabled-notification "󰍹    Laptop display enabled" "$TOGGLE"
+  fi
+}
+
+disable() {
+  if omarchy-hw-external-monitors; then
+    if omarchy-hyprland-toggle-disabled "$TOGGLE"; then
+      omarchy-hyprland-toggle --enabled-notification "󰍹    Laptop display disabled" "$TOGGLE"
+    fi
+  else
+    notify-send -u low "󰍹    Can't disable the only active display"
+    exit 1
+  fi
+}
+
+recover() {
+  if ! omarchy-hw-external-monitors && omarchy-hyprland-toggle-enabled "$TOGGLE"; then
+    omarchy-hyprland-toggle "$TOGGLE"
+  fi
+}
+
+case "$1" in
+  on) enable ;;
+  off) disable ;;
+  toggle) if omarchy-hyprland-toggle-enabled "$TOGGLE"; then enable; else disable; fi ;;
+  recover) recover ;;
+  *)
+    echo "Usage: $(basename "$0") {on|off|toggle|recover}" >&2
+    exit 1
+    ;;
+esac

bin/omarchy-hyprland-monitor-internal-toggle

@@ -1,29 +0,0 @@
-#!/bin/bash
-
-# Toggle the internal laptop display on/off.
-# Useful when connected to an external monitor and you want to close the lid
-# or just use the external display only.
-
-INTERNAL=$(hyprctl monitors all -j | jq -r '.[] | select(.name | startswith("eDP")) | .name')
-
-if [[ -z $INTERNAL ]]; then
-  notify-send -u low "󰍹    No internal display found"
-  exit 1
-fi
-
-DISABLED=$(hyprctl monitors all -j | jq -r --arg m "$INTERNAL" '.[] | select(.name == $m) | .disabled')
-
-if [[ $DISABLED == "true" ]]; then
-  hyprctl keyword monitor "$INTERNAL,preferred,auto,auto"
-  hyprctl dispatch movecursor 0 0
-  notify-send -u low "󰍹    Internal display on"
-else
-  ACTIVE_COUNT=$(hyprctl monitors -j | jq 'length')
-  if [[ $ACTIVE_COUNT -le 1 ]]; then
-    notify-send -u low "󰍹    Can't disable the only active display"
-    exit 1
-  fi
-
-  hyprctl keyword monitor "$INTERNAL,disable"
-  notify-send -u low "󰍹    Internal display off"
-fi

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -8,15 +8,28 @@ WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
 HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
 REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
 
-# Cycle through scales: 1 → 1.6 → 2 → 3 → 1
-CURRENT_INT=$(awk -v s="$CURRENT_SCALE" 'BEGIN { printf "%.0f", s * 10 }')
+# Cycle through scales: 1 → 1.25 → 1.6 → 2 → 3 → 1 (or reverse with --reverse)
+SCALES=(1 1.25 1.6 2 3)
 
-case "$CURRENT_INT" in
-10) NEW_SCALE=1.6 ;;
-16) NEW_SCALE=2 ;;
-20) NEW_SCALE=3 ;;
-*) NEW_SCALE=1 ;;
-esac
+# Find the index of the scale closest to the current one (Hyprland may
+# snap fractional scales to nearby values, so we can't match exactly)
+CURRENT_IDX=$(awk -v s="$CURRENT_SCALE" -v list="${SCALES[*]}" 'BEGIN {
+  n = split(list, arr, " ")
+  best = 0; best_diff = 1e9
+  for (i = 1; i <= n; i++) {
+    d = s - arr[i]; if (d < 0) d = -d
+    if (d < best_diff) { best_diff = d; best = i - 1 }
+  }
+  print best
+}')
+
+if [[ "$1" == "--reverse" ]]; then
+  NEW_IDX=$(( (CURRENT_IDX - 1 + ${#SCALES[@]}) % ${#SCALES[@]} ))
+else
+  NEW_IDX=$(( (CURRENT_IDX + 1) % ${#SCALES[@]} ))
+fi
+
+NEW_SCALE=${SCALES[$NEW_IDX]}
 
 hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
 notify-send -u low "󰍹    Display scaling set to ${NEW_SCALE}x"

bin/omarchy-hyprland-monitor-watch

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+# Listen on Hyprland's event socket and recover the internal display whenever
+# a monitor is removed.
+
+SOCKET="$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock"
+
+socat -U - "UNIX-CONNECT:$SOCKET" | while read -r event; do
+  case "$event" in
+    monitorremoved\>\>*|monitorremovedv2\>\>*)
+      omarchy-hyprland-monitor-internal recover
+      ;;
+  esac
+done

bin/omarchy-hyprland-toggle

@@ -0,0 +1,31 @@
+#!/bin/bash
+
+# Toggle permanent Hyprland flags by copying them into a directory that's sourced entirely.
+
+ENABLED_NOTIFICATION=""
+DISABLED_NOTIFICATION=""
+
+while [[ $# -gt 1 ]]; do
+  case $1 in
+    --enabled-notification) ENABLED_NOTIFICATION="$2"; shift 2 ;;
+    --disabled-notification) DISABLED_NOTIFICATION="$2"; shift 2 ;;
+    *) break ;;
+  esac
+done
+
+FLAG_NAME="$1"
+FLAG="$HOME/.local/state/omarchy/toggles/hypr/$FLAG_NAME.conf"
+FLAG_SOURCE="$OMARCHY_PATH/default/hypr/toggles/$FLAG_NAME.conf"
+
+if [[ -f $FLAG ]]; then
+  rm $FLAG
+  [[ -n $DISABLED_NOTIFICATION ]] && notify-send -u low "$DISABLED_NOTIFICATION"
+elif [[ -f $FLAG_SOURCE ]]; then
+  cp $FLAG_SOURCE $FLAG
+  [[ -n $ENABLED_NOTIFICATION ]] && notify-send -u low "$ENABLED_NOTIFICATION"
+else
+  echo "Flag not found: $FLAG_NAME"
+  exit 1
+fi
+
+hyprctl reload

bin/omarchy-hyprland-toggle-disabled

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Check if a Hyprland toggle is currently disabled (missing).
+
+[[ ! -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-toggle-enabled

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Check if a Hyprland toggle is currently enabled.
+
+[[ -f "$HOME/.local/state/omarchy/toggles/hypr/$1.conf" ]]

bin/omarchy-hyprland-window-gaps-toggle

@@ -1,15 +1,5 @@
 #!/bin/bash
 
-# Toggles the window gaps globally between no gaps and the default 10/5/2.
+# Toggles the window gaps globally between no gaps and the default.
 
-gaps=$(hyprctl getoption general:gaps_out -j | jq -r '.custom' | awk '{print $1}')
-
-if [[ $gaps == "0" ]]; then
-  hyprctl keyword general:gaps_out 10
-  hyprctl keyword general:gaps_in 5
-  hyprctl keyword general:border_size 2
-else
-  hyprctl keyword general:gaps_out 0
-  hyprctl keyword general:gaps_in 0
-  hyprctl keyword general:border_size 0
-fi
+omarchy-hyprland-toggle window-no-gaps

bin/omarchy-hyprland-window-single-square-aspect-toggle

@@ -1,13 +1,8 @@
 #!/bin/bash
 
-# Check current single_window_aspect_ratio setting
-CURRENT_VALUE=$(hyprctl getoption "layout:single_window_aspect_ratio" 2>/dev/null | head -1)
+# Toggle single-window square aspect ratio.
 
-# Parse vec2 output: "vec2: [1, 1]" or "vec2: [0, 0]"
-if [[ $CURRENT_VALUE == *"[1, 1]"* ]]; then
-  hyprctl keyword layout:single_window_aspect_ratio "0 0"
-  notify-send -u low "    Disable single-window square aspect ratio"
-else
-  hyprctl keyword layout:single_window_aspect_ratio "1 1"
-  notify-send -u low "    Enable single-window square aspect"
-fi
+omarchy-hyprland-toggle \
+  --enabled-notification "      Enable single-window square aspect ratio" \
+  --disabled-notification "      Disable single-window square aspect ratio" \
+  single-window-aspect-ratio

bin/omarchy-install-tailscale

@@ -2,9 +2,11 @@
 
 # Install the Tailscale mesh VPN service and a web app for the Tailscale Admin Console.
 
-curl -fsSL https://tailscale.com/install.sh | sh
+echo -e "\nInstalling Tailscale..."
+omarchy-pkg-add tailscale
 
 echo -e "\nStarting Tailscale..."
+sudo systemctl enable --now tailscaled.service
 sudo tailscale up --accept-routes
 
 omarchy-webapp-install "Tailscale" "https://login.tailscale.com/admin/machines" https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png

bin/omarchy-launch-screensaver

@@ -11,7 +11,7 @@ fi
 pgrep -f org.omarchy.screensaver && exit 0
 
 # Allow screensaver to be turned off but also force started
-if [[ -f ~/.local/state/omarchy/toggles/screensaver-off ]] && [[ $1 != "force" ]]; then
+if omarchy-toggle-enabled screensaver-off && [[ $1 != "force" ]]; then
   exit 1
 fi
 

bin/omarchy-menu

@@ -168,8 +168,9 @@ show_share_menu() {
 }
 
 show_toggle_menu() {
-  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Monitor Scaling\n󰛧  Laptop Display") in
+  local options="󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Monitor Scaling\n"
 
+  case $(menu "Toggle" "$options") in
   *Screensaver*) omarchy-toggle-screensaver ;;
   *Nightlight*) omarchy-toggle-nightlight ;;
   *Idle*) omarchy-toggle-idle ;;
@@ -178,15 +179,26 @@ show_toggle_menu() {
   *Ratio*) omarchy-hyprland-window-single-square-aspect-toggle ;;
   *Gaps*) omarchy-hyprland-window-gaps-toggle ;;
   *Scaling*) omarchy-hyprland-monitor-scaling-cycle ;;
-  *Laptop*) omarchy-hyprland-monitor-internal-toggle ;;
   *) back_to show_trigger_menu ;;
   esac
 }
 
 show_hardware_menu() {
-  case $(menu "Toggle" "  Hybrid GPU") in
+  local options="󰛧  Laptop Display"
+
+  if omarchy-hw-hybrid-gpu; then
+    options="$options\n  Hybrid GPU"
+  fi
+
+  if omarchy-hw-touchpad; then
+    options="$options\n󰟸  Touchpad"
+  fi
+
+  case $(menu "Toggle" "$options") in
+  *Laptop*) omarchy-hyprland-monitor-internal toggle ;;
+  *Touchpad*) omarchy-toggle-touchpad ;;
   *"Hybrid GPU"*) present_terminal omarchy-toggle-hybrid-gpu ;;
-  *) show_trigger_menu ;;
+  *) back_to show_trigger_menu ;;
   esac
 }
 
@@ -277,7 +289,7 @@ show_setup_config_menu() {
 show_setup_system_menu() {
   local options=""
 
-  if [[ -f ~/.local/state/omarchy/toggles/suspend-off ]]; then
+  if omarchy-toggle-enabled suspend-off; then
     options="$options󰒲  Enable Suspend"
   else
     options="$options󰒲  Disable Suspend"
@@ -529,9 +541,10 @@ show_update_channel_menu() {
   esac
 }
 show_update_process_menu() {
-  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
+  case $(menu "Restart" "  Hypridle\n  Hyprsunset\n󰎟  Mako\n  Swayosd\n󰌧  Walker\n󰍜  Waybar") in
   *Hypridle*) omarchy-restart-hypridle ;;
   *Hyprsunset*) omarchy-restart-hyprsunset ;;
+  *Mako*) omarchy-restart-mako ;;
   *Swayosd*) omarchy-restart-swayosd ;;
   *Walker*) omarchy-restart-walker ;;
   *Waybar*) omarchy-restart-waybar ;;
@@ -578,7 +591,7 @@ show_about() {
 
 show_system_menu() {
   local options="󱄄  Screensaver\n  Lock"
-  [[ ! -f ~/.local/state/omarchy/toggles/suspend-off ]] && options="$options\n󰒲  Suspend"
+  ! omarchy-toggle-enabled suspend-off && options="$options\n󰒲  Suspend"
   omarchy-hibernation-available && options="$options\n󰤁  Hibernate"
   options="$options\n󰍃  Logout\n󰜉  Restart\n󰐥  Shutdown"
 
@@ -604,6 +617,7 @@ go_to_menu() {
   *learn*) show_learn_menu ;;
   *trigger*) show_trigger_menu ;;
   *toggle*) show_toggle_menu ;;
+  *hardware*) show_hardware_menu ;;
   *share*) show_share_menu ;;
   *background*) show_background_menu ;;
   *capture*) show_capture_menu ;;

bin/omarchy-menu-keybindings

@@ -202,7 +202,7 @@ prioritize_entries() {
     if (match(line, /Move window to workspace/))  prio = 28
     if (match(line, /Move window silently to workspace/))  prio = 29
     if (match(line, /Swap window/))  prio = 30
-    if (match(line, /Move window focus/))  prio = 31
+    if (match(line, /Focus/))  prio = 31
     if (match(line, /Move window$/))  prio = 32
     if (match(line, /Resize window/))  prio = 33
     if (match(line, /Expand window/))  prio = 34

bin/omarchy-migrate

@@ -10,7 +10,7 @@ mkdir -p "$STATE_DIR"
 mkdir -p "$STATE_DIR/skipped"
 
 # Run any pending migrations
-for file in ~/.local/share/omarchy/migrations/*.sh; do
+for file in $OMARCHY_PATH/migrations/*.sh; do
   filename=$(basename "$file")
 
   if [[ ! -f $STATE_DIR/$filename && ! -f $STATE_DIR/skipped/$filename ]]; then

bin/omarchy-refresh-hyprland

@@ -7,3 +7,5 @@ omarchy-refresh-config hypr/bindings.conf
 omarchy-refresh-config hypr/input.conf
 omarchy-refresh-config hypr/looknfeel.conf
 omarchy-refresh-config hypr/hyprland.conf
+omarchy-refresh-config hypr/monitors.conf
+bash "$OMARCHY_PATH/install/config/detect-keyboard-layout.sh"

bin/omarchy-sudo-passwordless-toggle

@@ -1,12 +1,19 @@
 #!/bin/bash
 
 # Toggle passwordless sudo for the current user.
+# Usage: omarchy-sudo-passwordless-toggle [MINUTES]
 # First run: enables passwordless sudo for 15 minutes (after confirmation).
 # Second run: disables it early.
 
 NOPASSWD_FILE="/etc/sudoers.d/99-omarchy-nopasswd-${USER}"
 TIMER_NAME="omarchy-nopasswd-expire-${USER}"
 
+MINUTES=${1:-15}
+if [[ $1 && ! $1 =~ ^[0-9]+$ ]]; then
+  echo "Usage: omarchy-sudo-passwordless-toggle [MINUTES]" >&2
+  exit 1
+fi
+
 # Safety: if the file exists but the timer doesn't (e.g. after reboot), clean up
 if sudo test -f "$NOPASSWD_FILE" && ! systemctl is-active "${TIMER_NAME}.timer" &>/dev/null; then
   sudo rm "$NOPASSWD_FILE"
@@ -14,28 +21,37 @@ fi
 
 # Check for the file directly — sudo -n can stay cached or be granted by other rules
 if sudo test -f "$NOPASSWD_FILE"; then
-  sudo rm "$NOPASSWD_FILE"
-  sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
-  echo "Passwordless sudo has been DISABLED. Sudo will require a password again."
+  if [[ $1 ]]; then
+    sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
+    sudo systemd-run --on-active=${MINUTES}m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
+      rm "$NOPASSWD_FILE"
+    echo "Passwordless sudo timer updated. It will now automatically disable in ${MINUTES} minutes."
+  else
+    sudo rm "$NOPASSWD_FILE"
+    sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
+    echo "Passwordless sudo has been DISABLED. Sudo will require a password again."
+  fi
 else
   echo ""
-  echo "⚠️  WARNING: This will allow ANY process running as your user to"
-  echo "execute ANY command as root WITHOUT a password for 15 minutes."
+  echo "⚠️WARNING: This will allow ANY process running as your user to"
+  echo "execute ANY command as root WITHOUT a password for ${MINUTES} minutes."
   echo ""
   echo "This is useful for AI agents that need to run sudo commands,"
   echo "but it significantly weakens the security of your system."
   echo "Anyone or anything with access to your user account gets full root."
   echo ""
-  echo "Passwordless sudo will automatically disable after 15 minutes."
+  echo "Passwordless sudo will automatically disable after ${MINUTES} minutes."
   echo "Run this command again to disable it early."
   echo ""
 
-  if gum confirm "Enable passwordless sudo for 15 minutes? This is a significant security risk!"; then
+  if gum confirm "Enable passwordless sudo for ${MINUTES} minutes? This is a significant security risk!"; then
     echo "${USER} ALL=(ALL) NOPASSWD: ALL" | sudo tee "$NOPASSWD_FILE" > /dev/null
     sudo chmod 440 "$NOPASSWD_FILE"
-    sudo systemd-run --on-active=15m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
+    sudo systemd-run --on-active=${MINUTES}m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
       rm "$NOPASSWD_FILE"
-    echo "Passwordless sudo has been ENABLED. It will automatically disable in 15 minutes."
+
+    echo ""
+    echo "Passwordless sudo has been ENABLED. It will automatically disable in ${MINUTES} minutes."
     echo "Note: if you restart before then, run omarchy-sudo-passwordless-toggle again to disable it."
   else
     echo "Aborted. No changes made."

bin/omarchy-swayosd-brightness

@@ -8,8 +8,7 @@ percent="$1"
 progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"
 
-swayosd-client \
-  --monitor "$(omarchy-hyprland-monitor-focused)" \
-  --custom-icon display-brightness \
+omarchy-swayosd-client \
+  --custom-icon display-brightness-symbolic \
   --custom-progress "$progress" \
   --custom-progress-text "${percent}%"

bin/omarchy-swayosd-client

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Wrapper for swayosd-client that targets the currently focused monitor.
+
+exec swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)" "$@"

bin/omarchy-swayosd-kbd-brightness

@@ -8,8 +8,7 @@ percent="$1"
 progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"
 
-swayosd-client \
-  --monitor "$(omarchy-hyprland-monitor-focused)" \
-  --custom-icon keyboard-brightness \
+omarchy-swayosd-client \
+  --custom-icon keyboard-brightness-symbolic \
   --custom-progress "$progress" \
   --custom-progress-text "${percent}%"

bin/omarchy-theme-install

@@ -15,7 +15,7 @@ if [[ -z $REPO_URL ]]; then
 fi
 
 THEMES_DIR="$HOME/.config/omarchy/themes"
-THEME_NAME=$(basename "$REPO_URL" .git | sed -E 's/^omarchy-//; s/-theme$//')
+THEME_NAME=$(basename "$REPO_URL" .git | sed -E 's/^omarchy-//; s/-theme$//' | tr '[:upper:]' '[:lower:]')
 THEME_PATH="$THEMES_DIR/$THEME_NAME"
 
 # Remove existing theme if present

bin/omarchy-theme-set-browser

@@ -14,11 +14,11 @@ if omarchy-cmd-present chromium || omarchy-cmd-present brave; then
 
   if omarchy-cmd-present chromium; then
     echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
-    chromium --refresh-platform-policy --no-startup-window &>/dev/null
+    pgrep -x chromium >/dev/null && chromium --refresh-platform-policy --no-startup-window &>/dev/null
   fi
 
   if omarchy-cmd-present brave; then
     echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
-    brave --refresh-platform-policy --no-startup-window &>/dev/null
+    pgrep -x brave >/dev/null && brave --refresh-platform-policy --no-startup-window &>/dev/null
   fi
 fi

bin/omarchy-theme-set-vscode

@@ -7,9 +7,8 @@ VS_CODE_THEME="$HOME/.config/omarchy/current/theme/vscode.json"
 set_theme() {
   local editor_cmd="$1"
   local settings_path="$2"
-  local skip_flag="$3"
 
-  omarchy-cmd-present "$editor_cmd" && [[ ! -f $skip_flag ]] || return 0
+  omarchy-cmd-present "$editor_cmd" || return 0
 
   if [[ -f $VS_CODE_THEME ]]; then
     theme_name=$(jq -r '.name' "$VS_CODE_THEME")
@@ -34,7 +33,7 @@ set_theme() {
   fi
 }
 
-set_theme "code" "$HOME/.config/Code/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-vscode-theme-changes"
-set_theme "code-insiders" "$HOME/.config/Code - Insiders/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-vscode-insiders-theme-changes"
-set_theme "codium" "$HOME/.config/VSCodium/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-codium-theme-changes"
-set_theme "cursor" "$HOME/.config/Cursor/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-cursor-theme-changes"
+! omarchy-toggle-enabled skip-vscode-theme-changes && set_theme "code" "$HOME/.config/Code/User/settings.json"
+! omarchy-toggle-enabled skip-vscode-insiders-theme-changes && set_theme "code-insiders" "$HOME/.config/Code - Insiders/User/settings.json"
+! omarchy-toggle-enabled skip-codium-theme-changes && set_theme "codium" "$HOME/.config/VSCodium/User/settings.json"
+! omarchy-toggle-enabled skip-cursor-theme-changes && set_theme "cursor" "$HOME/.config/Cursor/User/settings.json"

bin/omarchy-toggle

@@ -0,0 +1,26 @@
+#!/bin/bash
+
+# Toggle Omarchy features between enabled and disabled
+
+ENABLED_NOTIFICATION=""
+DISABLED_NOTIFICATION=""
+
+while [[ $# -gt 1 ]]; do
+  case $1 in
+    --enabled-notification) ENABLED_NOTIFICATION="$2"; shift 2 ;;
+    --disabled-notification) DISABLED_NOTIFICATION="$2"; shift 2 ;;
+    *) break ;;
+  esac
+done
+
+FLAG_NAME="$1"
+FLAG="$HOME/.local/state/omarchy/toggles/$FLAG_NAME"
+
+if [[ -f $FLAG ]]; then
+  rm $FLAG
+  [[ -n $DISABLED_NOTIFICATION ]] && notify-send -u low "$DISABLED_NOTIFICATION"
+else
+  mkdir -p "$(dirname $FLAG)"
+  touch $FLAG
+  [[ -n $ENABLED_NOTIFICATION ]] && notify-send -u low "$ENABLED_NOTIFICATION"
+fi

bin/omarchy-toggle-enabled

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+# Check if a toggle is enabled (flag file exists)
+[[ -f "$HOME/.local/state/omarchy/toggles/$1" ]]

bin/omarchy-toggle-screensaver

@@ -1,12 +1,6 @@
 #!/bin/bash
 
-STATE_FILE=~/.local/state/omarchy/toggles/screensaver-off
-
-if [[ -f $STATE_FILE ]]; then
-  rm -f $STATE_FILE
-  notify-send -u low "󱄄   Screensaver enabled"
-else
-  mkdir -p "$(dirname $STATE_FILE)"
-  touch $STATE_FILE
-  notify-send -u low "󱄄   Screensaver disabled"
-fi
+omarchy-toggle \
+  --enabled-notification "󱄄   Screensaver disabled" \
+  --disabled-notification "󱄄   Screensaver enabled" \
+  screensaver-off

bin/omarchy-toggle-suspend

@@ -1,12 +1,6 @@
 #!/bin/bash
 
-STATE_FILE=~/.local/state/omarchy/toggles/suspend-off
-
-if [[ -f $STATE_FILE ]]; then
-  rm -f $STATE_FILE
-  notify-send -u low "󰒲   Suspend now available in system menu"
-else
-  mkdir -p "$(dirname $STATE_FILE)"
-  touch $STATE_FILE
-  notify-send -u low "󰒲   Suspend removed from system menu"
-fi
+omarchy-toggle \
+  --enabled-notification "󰒲   Suspend removed from system menu" \
+  --disabled-notification "󰒲   Suspend now available in system menu" \
+  suspend-off

bin/omarchy-toggle-touchpad

@@ -0,0 +1,29 @@
+#!/bin/bash
+
+STATE_CONF="$HOME/.local/state/omarchy/toggles/hypr/touchpad-disabled.conf"
+
+device="$(omarchy-hw-touchpad)"
+
+if [[ -z $device ]]; then
+  echo "No touchpad device found" >&2
+  exit 1
+fi
+
+enable() {
+  hyprctl keyword "device[$device]:enabled" true >/dev/null
+  rm -f "$STATE_CONF"
+  omarchy-swayosd-client --custom-icon input-touchpad-symbolic --custom-message "Touchpad enabled"
+}
+
+disable() {
+  hyprctl keyword "device[$device]:enabled" false >/dev/null
+  mkdir -p "$(dirname "$STATE_CONF")"
+  printf 'device {\n    name = %s\n    enabled = false\n}\n' "$device" > "$STATE_CONF"
+  omarchy-swayosd-client --custom-icon touchpad-disabled-symbolic --custom-message "Touchpad disabled"
+}
+
+case "${1:-toggle}" in
+  on) enable ;;
+  off) disable ;;
+  toggle) if [[ -f $STATE_CONF ]]; then enable; else disable; fi ;;
+esac

bin/omarchy-toggle-waybar

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+omarchy-toggle waybar-off
+
 if pgrep -x waybar >/dev/null; then
   pkill -x waybar
 else

bin/omarchy-update-restart

@@ -2,7 +2,7 @@
 
 echo
 
-if [[ ! -d /usr/lib/modules/$(uname -r) ]]; then
+if find /usr/lib/modules -maxdepth 2 -name vmlinuz -newermt "$(uptime -s)" 2>/dev/null | grep -q .; then
   gum confirm "Linux kernel has been updated. Reboot?" && omarchy-system-reboot
 elif [[ -f $HOME/.local/state/omarchy/reboot-required ]]; then
   gum confirm "Updates require reboot. Ready?" && omarchy-system-reboot

bin/omarchy-voxtype-status

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Clean up the voxtype --follow child when Waybar reloads
+trap 'kill 0' EXIT
+
 if omarchy-cmd-present voxtype; then
   voxtype status --follow --extended --format json | while read -r line; do
     echo "$line" | jq -c '. + {alt: .class}'

config/Typora/themes/ia_typora_night.css

@@ -8,7 +8,7 @@
   --light-header-color: #dbdbdb; /* H1-H3 */
   --select-text-bg-color: #186a9a;
   --accent-color: #4f525a;
-  --background-color: #101010;
+  --background-color: #000000;
   --font-color: #bbbcbc;
   --header-color: #bebebe; /* H4-H6 */
   --border-color: #232629;

config/hypr/hyprland.conf

@@ -19,5 +19,8 @@ source = ~/.config/hypr/bindings.conf
 source = ~/.config/hypr/looknfeel.conf
 source = ~/.config/hypr/autostart.conf
 
+# Toggle config flags dynamically
+source = ~/.local/state/omarchy/toggles/hypr/*.conf
+
 # Add any other personal Hyprland configuration below
 # windowrule = workspace 5, match:class qemu

config/hypr/monitors.conf

@@ -4,7 +4,7 @@
 
 # Optimized for retina-class 2x displays, like 13" 2.8K, 27" 5K, 32" 6K.
 env = GDK_SCALE,2
-monitor=,preferred,auto,auto,vrr,1
+monitor=,preferred,auto,auto
 
 # Good compromise for 27" or 32" 4K monitors (but fractional!)
 # env = GDK_SCALE,1.75
@@ -21,3 +21,6 @@ monitor=,preferred,auto,auto,vrr,1
 # Example for Framework 13 w/ 6K XDR Apple display
 # monitor = DP-5, 6016x3384@60, auto, 2
 # monitor = eDP-1, 2880x1920@120, auto, 2
+
+# Disable the second ghost monitor on an Apple 6K XDR over Thunderbolt
+# monitor=DP-2,disable

config/systemd/user/omarchy-recover-internal-monitor.service

@@ -0,0 +1,11 @@
+[Unit]
+Description=Recover the internal monitor toggle when no external display is connected
+Before=graphical-session-pre.target
+ConditionPathExists=%h/.local/state/omarchy/toggles/hypr/internal-monitor-disable.conf
+
+[Service]
+Type=oneshot
+ExecStart=%h/.local/share/omarchy/bin/omarchy-hw-recover-internal-monitor
+
+[Install]
+WantedBy=graphical-session-pre.target

default/bash/aliases

@@ -44,10 +44,11 @@ alias ....='cd ../../..'
 
 # Tools
 alias c='opencode'
-alias cx='printf "\033[2J\033[3J\033[H" && claude --allow-dangerously-skip-permissions'
+alias cx='printf "\033[2J\033[3J\033[H" && claude --permission-mode bypassPermissions'
 alias d='docker'
 alias r='rails'
 alias t='tmux attach || tmux new -s Work'
+alias i='tdl c cx'
 n() { if [ "$#" -eq 0 ]; then command nvim . ; else command nvim "$@"; fi; }
 
 # Git

default/bash/init

@@ -11,7 +11,11 @@ if command -v zoxide &> /dev/null; then
 fi
 
 if command -v try &> /dev/null; then
-  eval "$(SHELL=/bin/bash command try init ~/Work/tries)"
+  try() {
+    unset -f try
+    eval "$(SHELL=/bin/bash command try init ~/Work/tries)"
+    try "$@"
+  }
 fi
 
 if command -v fzf &> /dev/null; then

default/elephant/omarchy_themes.lua

@@ -28,6 +28,15 @@ local function first_image_in_dir(dir)
   return nil
 end
 
+-- Find preview.png, preview.jpg, or first backgrounds/ image in a theme dir
+local function find_preview_path(dir)
+  local png = dir .. "/preview.png"
+  local jpg = dir .. "/preview.jpg"
+  if file_exists(png) then return png end
+  if file_exists(jpg) then return jpg end
+  return first_image_in_dir(dir .. "/backgrounds")
+end
+
 -- The main function elephant will call
 function GetEntries()
   local entries = {}
@@ -51,19 +60,10 @@ function GetEntries()
       if theme_name and not seen_themes[theme_name] then
         seen_themes[theme_name] = true
 
-        -- Check for preview images directly (no subprocess)
-        local preview_path = nil
-        local preview_png = theme_path .. "/preview.png"
-        local preview_jpg = theme_path .. "/preview.jpg"
-
-        if file_exists(preview_png) then
-          preview_path = preview_png
-        elseif file_exists(preview_jpg) then
-          preview_path = preview_jpg
-        else
-          -- Fallback: get first image from backgrounds (one ls call)
-          preview_path = first_image_in_dir(theme_path .. "/backgrounds")
-        end
+        -- Check the theme dir, then fall back to the default theme dir
+        -- (for partial user customizations that don't ship a preview)
+        local preview_path = find_preview_path(theme_path)
+          or find_preview_path(default_theme_dir .. "/" .. theme_name)
 
         if preview_path and preview_path ~= "" then
           local display_name = theme_name:gsub("_", " "):gsub("%-", " ")

default/hypr/apps.conf

@@ -12,6 +12,7 @@ source = ~/.local/share/omarchy/default/hypr/apps/geforce.conf
 source = ~/.local/share/omarchy/default/hypr/apps/moonlight.conf
 source = ~/.local/share/omarchy/default/hypr/apps/system.conf
 source = ~/.local/share/omarchy/default/hypr/apps/telegram.conf
+source = ~/.local/share/omarchy/default/hypr/apps/typora.conf
 source = ~/.local/share/omarchy/default/hypr/apps/terminals.conf
 source = ~/.local/share/omarchy/default/hypr/apps/walker.conf
 source = ~/.local/share/omarchy/default/hypr/apps/webcam-overlay.conf

default/hypr/apps/browser.conf

@@ -14,3 +14,6 @@ windowrule = tile on, match:tag chromium-based-browser
 # Only a subtle opacity change, but not for video sites
 windowrule = opacity 1.0 0.97, match:tag chromium-based-browser
 windowrule = opacity 1.0 0.97, match:tag firefox-based-browser
+
+# Hide the screen-sharing notification bar (the "Hide" button on it is broken on Wayland)
+windowrule = workspace special silent, match:title .*is sharing.*

default/hypr/apps/typora.conf

@@ -0,0 +1,2 @@
+# Float Typora print dialog
+windowrule = match:class ^Typora$, match:title ^Print$, float on, center on

default/hypr/autostart.conf

@@ -1,12 +1,13 @@
 exec-once = uwsm-app -- hypridle
 exec-once = uwsm-app -- mako
-exec-once = uwsm-app -- waybar
+exec-once = ! omarchy-toggle-enabled waybar-off && uwsm-app -- waybar
 exec-once = uwsm-app -- fcitx5 --disable notificationitem
 exec-once = uwsm-app -- swaybg -i ~/.config/omarchy/current/background -m fill
 exec-once = uwsm-app -- swayosd-server
 exec-once = /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
 exec-once = omarchy-cmd-first-run
 exec-once = omarchy-powerprofiles-init
+exec-once = uwsm-app -- omarchy-hyprland-monitor-watch
 
 # Slow app launch fix -- set systemd vars
 exec-once = systemctl --user import-environment $(env | cut -d'=' -f 1)

default/hypr/bindings/media.conf

@@ -1,28 +1,28 @@
-# Only display the OSD on the currently focused monitor
-$osdclient = swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)"
-
 # Laptop multimedia keys for volume and LCD brightness (with OSD)
-bindeld = ,XF86AudioRaiseVolume, Volume up, exec, $osdclient --output-volume raise
-bindeld = ,XF86AudioLowerVolume, Volume down, exec, $osdclient --output-volume lower
-bindeld = ,XF86AudioMute, Mute, exec, $osdclient --output-volume mute-toggle
+bindeld = ,XF86AudioRaiseVolume, Volume up, exec, omarchy-swayosd-client --output-volume raise
+bindeld = ,XF86AudioLowerVolume, Volume down, exec, omarchy-swayosd-client --output-volume lower
+bindeld = ,XF86AudioMute, Mute, exec, omarchy-swayosd-client --output-volume mute-toggle
 bindeld = ,XF86AudioMicMute, Mute microphone, exec, omarchy-cmd-mic-mute
 bindeld = ,XF86MonBrightnessUp, Brightness up, exec, omarchy-brightness-display +5%
 bindeld = ,XF86MonBrightnessDown, Brightness down, exec, omarchy-brightness-display 5%-
 bindeld = ,XF86KbdBrightnessUp, Keyboard brightness up, exec, omarchy-brightness-keyboard up
 bindeld = ,XF86KbdBrightnessDown, Keyboard brightness down, exec, omarchy-brightness-keyboard down
 bindld = ,XF86KbdLightOnOff, Keyboard backlight cycle, exec, omarchy-brightness-keyboard cycle
+bindld = ,XF86TouchpadToggle, Toggle touchpad, exec, omarchy-toggle-touchpad
+bindld = ,XF86TouchpadOn, Enable touchpad, exec, omarchy-toggle-touchpad on
+bindld = ,XF86TouchpadOff, Disable touchpad, exec, omarchy-toggle-touchpad off
 
 # Precise 1% multimedia adjustments with Alt modifier
-bindeld = ALT, XF86AudioRaiseVolume, Volume up precise, exec, $osdclient --output-volume +1
-bindeld = ALT, XF86AudioLowerVolume, Volume down precise, exec, $osdclient --output-volume -1
+bindeld = ALT, XF86AudioRaiseVolume, Volume up precise, exec, omarchy-swayosd-client --output-volume +1
+bindeld = ALT, XF86AudioLowerVolume, Volume down precise, exec, omarchy-swayosd-client --output-volume -1
 bindeld = ALT, XF86MonBrightnessUp, Brightness up precise, exec, omarchy-brightness-display +1%
 bindeld = ALT, XF86MonBrightnessDown, Brightness down precise, exec, omarchy-brightness-display 1%-
 
 # Requires playerctl
-bindld = , XF86AudioNext, Next track, exec, $osdclient --playerctl next
-bindld = , XF86AudioPause, Pause, exec, $osdclient --playerctl play-pause
-bindld = , XF86AudioPlay, Play, exec, $osdclient --playerctl play-pause
-bindld = , XF86AudioPrev, Previous track, exec, $osdclient --playerctl previous
+bindld = , XF86AudioNext, Next track, exec, omarchy-swayosd-client --playerctl next
+bindld = , XF86AudioPause, Pause, exec, omarchy-swayosd-client --playerctl play-pause
+bindld = , XF86AudioPlay, Play, exec, omarchy-swayosd-client --playerctl play-pause
+bindld = , XF86AudioPrev, Previous track, exec, omarchy-swayosd-client --playerctl previous
 
 # Switch audio output with Super + Mute
 bindld = SUPER, XF86AudioMute, Switch audio output, exec, omarchy-cmd-audio-switch

default/hypr/bindings/tiling-v2.conf

@@ -13,10 +13,10 @@ bindd = SUPER, O, Pop window out (float & pin), exec, omarchy-hyprland-window-po
 bindd = SUPER, L, Toggle workspace layout, exec, omarchy-hyprland-workspace-layout-toggle
 
 # Move focus with SUPER + arrow keys
-bindd = SUPER, LEFT, Move window focus left, movefocus, l
-bindd = SUPER, RIGHT, Move window focus right, movefocus, r
-bindd = SUPER, UP, Move window focus up, movefocus, u
-bindd = SUPER, DOWN, Move window focus down, movefocus, d
+bindd = SUPER, LEFT, Focus on left window, movefocus, l
+bindd = SUPER, RIGHT, Focus on right window, movefocus, r
+bindd = SUPER, UP, Focus on above window, movefocus, u
+bindd = SUPER, DOWN, Focus on below window, movefocus, d
 
 # Switch workspaces with SUPER + [1-9; 0]
 bindd = SUPER, code:10, Switch to workspace 1, workspace, 1
@@ -76,11 +76,15 @@ bindd = SUPER SHIFT, UP, Swap window up, swapwindow, u
 bindd = SUPER SHIFT, DOWN, Swap window down, swapwindow, d
 
 # Cycle through applications on active workspace
-bindd = ALT, TAB, Cycle to next window, cyclenext
-bindd = ALT SHIFT, TAB, Cycle to prev window, cyclenext, prev
+bindd = ALT, TAB, Focus on next window, cyclenext
+bindd = ALT SHIFT, TAB, Focus on previous window, cyclenext, prev
 bindd = ALT, TAB, Reveal active window on top, bringactivetotop
 bindd = ALT SHIFT, TAB, Reveal active window on top, bringactivetotop
 
+# Cycle through monitors
+bindd = CTRL ALT, TAB, Focus on next monitor, focusmonitor, +1
+bindd = CTRL ALT SHIFT, TAB, Focus on previous monitor, focusmonitor, -1
+
 # Resize active window
 bindd = SUPER, code:20, Expand window left, resizeactive, -100 0    # - key
 bindd = SUPER, code:21, Shrink window left, resizeactive, 100 0     # = key
@@ -124,5 +128,6 @@ bindd = SUPER ALT, code:12, Switch to group window 3, changegroupactive, 3
 bindd = SUPER ALT, code:13, Switch to group window 4, changegroupactive, 4
 bindd = SUPER ALT, code:14, Switch to group window 5, changegroupactive, 5
 
-# Cycle monitor scaling
-bindd = SUPER, Slash, Cycle monitor scaling, exec, omarchy-hyprland-monitor-scaling-cycle
+# Cycle monitor scaling with SUPER + /
+bindd = SUPER, code:61, Cycle monitor scaling, exec, omarchy-hyprland-monitor-scaling-cycle
+bindd = SUPER ALT, code:61, Cycle monitor scaling backwards, exec, omarchy-hyprland-monitor-scaling-cycle --reverse

default/hypr/bindings/utilities.conf

@@ -3,6 +3,7 @@ bindd = SUPER, SPACE, Launch apps, exec, omarchy-launch-walker
 bindd = SUPER CTRL, E, Emoji picker, exec, omarchy-launch-walker -m symbols
 bindd = SUPER CTRL, C, Capture menu, exec, omarchy-menu capture
 bindd = SUPER CTRL, O, Toggle menu, exec, omarchy-menu toggle
+bindd = SUPER CTRL, H, Hardware menu, exec, omarchy-menu hardware
 bindd = SUPER ALT, SPACE, Omarchy menu, exec, omarchy-menu
 bindd = SUPER SHIFT, code:201, Omarchy menu, exec, omarchy-menu
 bindd = SUPER, ESCAPE, System menu, exec, omarchy-menu system
@@ -28,7 +29,9 @@ bindd = SUPER SHIFT ALT, COMMA, Restore last notification, exec, makoctl restore
 # Toggles
 bindd = SUPER CTRL, I, Toggle locking on idle, exec, omarchy-toggle-idle
 bindd = SUPER CTRL, N, Toggle nightlight, exec, omarchy-toggle-nightlight
-bindd = SUPER CTRL, Delete, Toggle laptop display, exec, omarchy-hyprland-monitor-internal-toggle
+bindd = SUPER CTRL, Delete, Toggle laptop display, exec, omarchy-hyprland-monitor-internal toggle
+bindl = , switch:on:Lid Switch, exec, omarchy-hyprland-monitor-internal off
+bindl = , switch:off:Lid Switch, exec, omarchy-hyprland-monitor-internal on
 
 # Control Apple Display brightness
 bindd = CTRL, F1, Apple Display brightness down, exec, omarchy-brightness-display-apple -5000

default/hypr/looknfeel.conf

@@ -91,7 +91,7 @@ animations {
 
     animation = global, 1, 10, default
     animation = border, 1, 5.39, easeOutQuint
-    animation = windows, 1, 4.79, easeOutQuint
+    animation = windows, 1, 3.79, easeOutQuint
     animation = windowsIn, 1, 4.1, easeOutQuint, popin 87%
     animation = windowsOut, 1, 1.49, linear, popin 87%
     animation = fadeIn, 1, 1.73, almostLinear
@@ -103,7 +103,7 @@ animations {
     animation = fadeLayersIn, 1, 1.79, almostLinear
     animation = fadeLayersOut, 1, 1.39, almostLinear
     animation = workspaces, 0, 0, ease
-    animation = specialWorkspace, 1, 4, easeOutQuint, slidevert
+    animation = specialWorkspace, 1, 3, easeOutQuint, slidevert
 }
 
 # See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more

default/hypr/toggles/flags.conf

@@ -0,0 +1,2 @@
+# This directory is intended for permanent config toggle flags.
+# Do not remove this file (as the directory always needs at least one file).

default/hypr/toggles/internal-monitor-disable.conf

@@ -0,0 +1,2 @@
+# Disable the internal laptop monitor
+monitor=eDP-1,disable

default/hypr/toggles/single-window-aspect-ratio.conf

@@ -0,0 +1,5 @@
+# Avoid overly wide single-window layouts on wide screens
+layout {
+    single_window_aspect_ratio = 1 1
+}
+

default/hypr/toggles/window-no-gaps.conf

@@ -0,0 +1,6 @@
+# Remove all window gaps and borders
+general {
+    gaps_out = 0
+    gaps_in = 0
+    border_size = 0
+}

default/snapper/root

@@ -0,0 +1,8 @@
+# Omarchy snapshots root only for pre-update recovery — kept to 5, no timeline
+SUBVOLUME="/"
+FSTYPE="btrfs"
+
+NUMBER_LIMIT="5"
+NUMBER_LIMIT_IMPORTANT="5"
+
+TIMELINE_CREATE="no"

default/systemd/system-sleep/resume-boost

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-# Temporarily switch to performance power profile on resume
-# to avoid sluggishness while the system catches up, then
-# restore the previous profile after 10 seconds.
-
-if [[ $1 == "pre" ]]; then
-  mkdir -p /run/omarchy
-  powerprofilesctl get > /run/omarchy/power-profile-before-sleep
-fi
-
-if [[ $1 == "post" ]]; then
-  previous=$(cat /run/omarchy/power-profile-before-sleep 2>/dev/null || echo "balanced")
-  powerprofilesctl set performance
-  systemd-run --on-active=10 --timer-property=AccuracySec=1 powerprofilesctl set "$previous"
-fi

default/voxtype/config.toml

@@ -25,6 +25,9 @@ sample_rate = 16000
 # Maximum recording duration in seconds (safety limit)
 max_duration_secs = 60
 
+# Pause MPRIS media players during recording
+pause_media = true
+
 # [audio.feedback]
 # Enable audio feedback sounds (beeps when recording starts/stops)
 # enabled = true

install/config/all.sh

@@ -22,6 +22,7 @@ run_logged $OMARCHY_INSTALL/config/unmount-fuse.sh
 run_logged $OMARCHY_INSTALL/config/sudoless-asdcontrol.sh
 run_logged $OMARCHY_INSTALL/config/input-group.sh
 run_logged $OMARCHY_INSTALL/config/omarchy-ai-skill.sh
+run_logged $OMARCHY_INSTALL/config/omarchy-toggles.sh
 run_logged $OMARCHY_INSTALL/config/kernel-modules-hook.sh
 run_logged $OMARCHY_INSTALL/config/powerprofilesctl-rules.sh
 run_logged $OMARCHY_INSTALL/config/wifi-powersave-rules.sh
@@ -43,10 +44,8 @@ run_logged $OMARCHY_INSTALL/config/hardware/intel/thermald.sh
 run_logged $OMARCHY_INSTALL/config/hardware/intel/ipu7-camera.sh
 run_logged $OMARCHY_INSTALL/config/hardware/intel/ptl-kernel.sh
 run_logged $OMARCHY_INSTALL/config/hardware/intel/fix-wifi7-eht.sh
-run_logged $OMARCHY_INSTALL/config/hardware/intel/resume-boost.sh
 
 run_logged $OMARCHY_INSTALL/config/hardware/dell/fix-xps-haptic-touchpad.sh
-run_logged $OMARCHY_INSTALL/config/hardware/dell/fix-xps-ptl-display.sh
 
 run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-audio-mixer.sh
 run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-mic.sh

install/config/hardware/dell/fix-xps-ptl-display.sh

@@ -1,20 +0,0 @@
-# Fix display issues on Dell XPS Panther Lake (Xe3) systems.
-# Xe PSR causes freezes and display glitches on both OLED and IPS panels.
-# LG OLED panels also need Panel Replay disabled.
-if omarchy-hw-match "XPS" && omarchy-hw-intel-ptl; then
-  echo "Detected Dell XPS on Panther Lake, applying display power-saving fixes..."
-
-  if omarchy-hw-dell-xps-oled; then
-    CMDLINE='KERNEL_CMDLINE[default]+=" xe.enable_psr=0 xe.enable_panel_replay=0"'
-    COMMENT='Disable Xe PSR and Panel Replay on Dell XPS Panther Lake OLED systems'
-  else
-    CMDLINE='KERNEL_CMDLINE[default]+=" xe.enable_psr=0"'
-    COMMENT='Disable Xe PSR on Dell XPS Panther Lake systems'
-  fi
-
-  sudo mkdir -p /etc/limine-entry-tool.d
-  cat <<EOF | sudo tee /etc/limine-entry-tool.d/dell-xps-ptl-display.conf >/dev/null
-# $COMMENT
-$CMDLINE
-EOF
-fi

install/config/hardware/intel/ptl-kernel.sh

@@ -5,7 +5,9 @@ if omarchy-hw-intel-ptl; then
   echo "Detected Intel Panther Lake, installing PTL kernel..."
 
   omarchy-pkg-add linux-ptl linux-ptl-headers
-  sudo pacman -Rdd --noconfirm linux linux-headers 2>/dev/null || true
+  for pkg in linux linux-headers; do
+    sudo pacman -Rdd --noconfirm "$pkg" 2>/dev/null || true
+  done
 
   sudo mkdir -p /etc/limine-entry-tool.d
   cat <<EOF | sudo tee /etc/limine-entry-tool.d/intel-panther-lake.conf >/dev/null

install/config/hardware/intel/resume-boost.sh

@@ -1,8 +0,0 @@
-# Boost CPU performance for 10 seconds after resume on Intel systems.
-# The powersave governor with balance_power EPP is slow to ramp frequency
-# after long suspends, causing noticeable sluggishness on wake.
-
-if omarchy-hw-intel; then
-  sudo mkdir -p /usr/lib/systemd/system-sleep
-  sudo install -m 0755 -o root -g root "$OMARCHY_PATH/default/systemd/system-sleep/resume-boost" /usr/lib/systemd/system-sleep/
-fi

install/config/hardware/intel/video-acceleration.sh

@@ -1,9 +1,9 @@
 # This installs hardware video acceleration for Intel GPUs
 
 if INTEL_GPU=$(lspci | grep -iE 'vga|3d|display' | grep -i 'intel'); then
-  # HD Graphics / Iris / Xe / Arc use intel-media-driver
+  # HD Graphics / Iris / Xe / Arc use intel-media-driver + VPL
   if [[ ${INTEL_GPU,,} =~ (hd\ graphics|uhd\ graphics|xe|iris|arc) ]]; then
-    omarchy-pkg-add intel-media-driver
+    omarchy-pkg-add intel-media-driver libvpl vpl-gpu-rt
   elif [[ ${INTEL_GPU,,} =~ "gma" ]]; then
     # Older generations from 2008 to ~2014-2017 use libva-intel-driver
     omarchy-pkg-add libva-intel-driver

install/config/omarchy-toggles.sh

@@ -0,0 +1,3 @@
+# Toggles are used to turn certain features on/off in a persistent way
+mkdir -p ~/.local/state/omarchy/toggles/hypr
+cp $OMARCHY_PATH/default/hypr/toggles/flags.conf ~/.local/state/omarchy/toggles/hypr/

install/first-run/recover-internal-monitor.sh

@@ -0,0 +1 @@
+systemctl --user enable omarchy-recover-internal-monitor.service

install/login/limine-snapper.sh

@@ -50,26 +50,14 @@ EOF
   # We overwrite the whole thing knowing the limine-update will add the entries for us
   sudo cp $OMARCHY_PATH/default/limine/limine.conf /boot/limine.conf
 
-  # Match Snapper configs if not installing from the ISO
-  if [[ -z ${OMARCHY_CHROOT_INSTALL:-} ]]; then
-    if ! sudo snapper list-configs 2>/dev/null | grep -q "root"; then
-      sudo snapper -c root create-config /
-    fi
-
-    if ! sudo snapper list-configs 2>/dev/null | grep -q "home"; then
-      sudo snapper -c home create-config /home
-    fi
+  # Only snapshot root — /home is user data; rolling it back loses user work
+  if ! sudo snapper list-configs 2>/dev/null | grep -q "root"; then
+    sudo snapper -c root create-config /
   fi
+  sudo cp $OMARCHY_PATH/default/snapper/root /etc/snapper/configs/root
 
-  # Enable quota to allow space-aware algorithms to work
-  sudo btrfs quota enable /
-
-  # Tweak default Snapper configs
-  sudo sed -i 's/^TIMELINE_CREATE="yes"/TIMELINE_CREATE="no"/' /etc/snapper/configs/{root,home}
-  sudo sed -i 's/^NUMBER_LIMIT="50"/NUMBER_LIMIT="5"/' /etc/snapper/configs/{root,home}
-  sudo sed -i 's/^NUMBER_LIMIT_IMPORTANT="10"/NUMBER_LIMIT_IMPORTANT="5"/' /etc/snapper/configs/{root,home}
-  sudo sed -i 's/^SPACE_LIMIT="0.5"/SPACE_LIMIT="0.3"/' /etc/snapper/configs/{root,home}
-  sudo sed -i 's/^FREE_LIMIT="0.2"/FREE_LIMIT="0.3"/' /etc/snapper/configs/{root,home}
+  # Disable btrfs quotas — full qgroup accounting is a major performance drag
+  sudo btrfs quota disable / 2>/dev/null || true
 
   chrootable_systemctl_enable limine-snapper-sync.service
 fi

install/omarchy-base.packages

@@ -112,6 +112,7 @@ sddm
 signal-desktop
 slurp
 spotify
+socat
 starship
 sushi
 swaybg

install/omarchy-other.packages

@@ -55,6 +55,10 @@ tuxedo-drivers-nocompatcheck-dkms
 yt6801-dkms
 zram-generator
 
+# Intel encoding processing
+libvpl
+vpl-gpu-rt
+
 # Vulkan drivers (auto-detected by hardware)
 vulkan-intel
 vulkan-radeon

migrations/1775241210.sh

@@ -0,0 +1,16 @@
+echo "Enable GPU in voxtype if Vulkan is available"
+
+if omarchy-cmd-present voxtype; then
+  if omarchy-hw-vulkan; then
+    echo "Vulkan is available, enabling GPU in voxtype"
+    sudo voxtype setup gpu --enable || true
+  fi
+
+  # see https://github.com/peteonrails/voxtype/commit/ce6e9919cbe54cb8808dcb3cdd3bcb3260d7b900
+  # earlier versions of voxtype hard-coded the non-GPU backend in the systemd service file,
+  # so we need to re-run setup to update it to use /usr/bin/voxtype (the symlink)
+  voxtype setup systemd
+
+  systemctl --user restart voxtype
+  omarchy-restart-waybar
+fi

migrations/1776099290.sh

@@ -1,8 +0,0 @@
-echo "Ensure xe.enable_psr=0 is set in CMDLINE for XPS Panther Lake systems"
-
-if omarchy-hw-match "XPS" && omarchy-hw-intel-ptl && [[ -f /etc/default/limine ]]; then
-  if ! grep -Fq 'xe.enable_psr=0' /etc/default/limine; then
-    echo 'KERNEL_CMDLINE[default]+=" xe.enable_psr=0"' | sudo tee -a /etc/default/limine >/dev/null
-    sudo limine-mkinitcpio
-  fi
-fi

migrations/1776410469.sh

@@ -0,0 +1,9 @@
+echo "Add flags sourcing to hyprland.conf"
+
+HYPR_CONF=~/.config/hypr/hyprland.conf
+
+source "$OMARCHY_PATH/install/config/omarchy-toggles.sh"
+
+if [[ -f $HYPR_CONF ]] && ! grep -q "toggles/hypr/\*\.conf" "$HYPR_CONF"; then
+  echo -e "\n# Toggle config flags dynamically\nsource = ~/.local/state/omarchy/toggles/hypr/*.conf" >> "$HYPR_CONF"
+fi

migrations/1776611242.sh

@@ -0,0 +1,4 @@
+echo "Install socat so we can reactivate internal display when external display is removed"
+
+omarchy-pkg-add socat
+uwsm-app -- omarchy-hyprland-monitor-watch &

migrations/1776615976.sh

@@ -0,0 +1,3 @@
+echo "Install missing Intel VPL drivers (libvpl, vpl-gpu-rt) on systems with Intel GPUs"
+
+bash "$OMARCHY_PATH/install/config/hardware/intel/video-acceleration.sh"

migrations/1776617403.sh

@@ -0,0 +1,14 @@
+echo "Enable pause_media in voxtype config"
+
+VOXTYPE_CONF=~/.config/voxtype/config.toml
+
+if [[ -f $VOXTYPE_CONF ]] && ! grep -q 'pause_media' "$VOXTYPE_CONF"; then
+  if grep -q '^\[audio\]' "$VOXTYPE_CONF"; then
+    sed -i '/^\[audio\]/a\
+\
+# Pause MPRIS media players during recording\
+pause_media = true' "$VOXTYPE_CONF"
+  else
+    printf '\n[audio]\n# Pause MPRIS media players during recording\npause_media = true\n' >> "$VOXTYPE_CONF"
+  fi
+fi

migrations/1776781956.sh

@@ -0,0 +1,19 @@
+echo "Dell XPS Panther Lake display kernel cmdline is no longer necessary"
+
+DROP_IN="/etc/limine-entry-tool.d/dell-xps-ptl-display.conf"
+DEFAULT_LIMINE="/etc/default/limine"
+NEEDS_UPDATE=0
+
+if [[ -f $DROP_IN ]]; then
+  sudo rm -f "$DROP_IN"
+  NEEDS_UPDATE=1
+fi
+
+if [[ -f $DEFAULT_LIMINE ]] && grep -q 'xe\.enable_psr' "$DEFAULT_LIMINE"; then
+  sudo sed -i -E '/^KERNEL_CMDLINE.*xe\.enable_psr/d; /^# .*(Dell XPS|Xe PSR|Panel Replay)/d' "$DEFAULT_LIMINE"
+  NEEDS_UPDATE=1
+fi
+
+if (( NEEDS_UPDATE )); then
+  sudo limine-update
+fi

migrations/1776781957.sh

@@ -0,0 +1,7 @@
+echo "Drop vrr,1 from default monitor line as it creates a small lag"
+
+MONITORS_CONF=~/.config/hypr/monitors.conf
+
+if [[ -f $MONITORS_CONF ]]; then
+  sed -i 's/^monitor=,preferred,auto,auto,vrr,1$/monitor=,preferred,auto,auto/' "$MONITORS_CONF"
+fi

migrations/1776784497.sh

@@ -0,0 +1,5 @@
+echo "Remove resume boost feature"
+
+if [[ -f /usr/lib/systemd/system-sleep/resume-boost ]]; then
+  sudo rm /usr/lib/systemd/system-sleep/resume-boost
+fi

migrations/1776927490.sh

@@ -0,0 +1,50 @@
+echo "Drop /home snapshots, btrfs quotas, and timeline snapshots (keep 5 root snapshots, never more)"
+
+if ! omarchy-cmd-present snapper btrfs; then
+  exit 0
+fi
+
+# Disable btrfs quotas first — every subvolume delete below would otherwise update
+# all qgroups, which is exactly the performance drag we're removing.
+sudo btrfs quota disable / 2>/dev/null || true
+
+# Remove the home config, all its snapshots, and the .snapshots subvolume.
+# If the snapshots look like someone's been using them manually (pre/post pairs,
+# userdata tags, freeform descriptions), ask before destroying.
+if sudo snapper list-configs 2>/dev/null | grep -q "home"; then
+  drop_home="yes"
+
+  if sudo snapper -c home --csvout list 2>/dev/null | \
+     awk -F, 'NR>1 && ($6=="pre" || $6=="post" || $13!="" || ($12!="current" && $12!="timeline" && $12 !~ /^[0-9]+\.[0-9]+\.[0-9]+/))' | \
+     grep -q .; then
+    gum confirm "Drop unused /home snapshots for better performance?" || drop_home="no"
+  fi
+
+  if [[ $drop_home == "yes" ]]; then
+    sudo snapper -c home list --columns number 2>/dev/null | awk 'NR>2 && $1 != "0" {print $1}' | \
+      xargs -r sudo snapper -c home delete 2>/dev/null
+    sudo snapper -c home delete-config 2>/dev/null
+
+    if [[ -d /home/.snapshots ]]; then
+      for snap in /home/.snapshots/*/snapshot; do
+        [[ -d $snap ]] && sudo btrfs subvolume delete "$snap" 2>/dev/null
+      done
+      sudo rm -rf /home/.snapshots/* 2>/dev/null
+      sudo btrfs subvolume delete /home/.snapshots 2>/dev/null
+    fi
+  fi
+fi
+
+# Ensure root config exists and matches our shipped defaults
+if ! sudo snapper list-configs 2>/dev/null | grep -q "root"; then
+  sudo snapper -c root create-config /
+fi
+sudo cp $OMARCHY_PATH/default/snapper/root /etc/snapper/configs/root
+
+# Delete all timeline snapshots — we only want pre-update (cleanup=number) snapshots
+sudo snapper -c root list --columns number,cleanup 2>/dev/null | \
+  awk '$3 == "timeline" {print $1}' | \
+  xargs -r sudo snapper -c root delete 2>/dev/null
+
+# Enforce NUMBER_LIMIT=5 on any existing number snapshots beyond the new cap
+sudo snapper -c root cleanup number 2>/dev/null

migrations/1776935686.sh

@@ -0,0 +1,9 @@
+echo "Recover the internal monitor at login when no external display is connected"
+
+SERVICE=omarchy-recover-internal-monitor.service
+
+mkdir -p ~/.config/systemd/user
+cp $OMARCHY_PATH/config/systemd/user/$SERVICE ~/.config/systemd/user/$SERVICE
+
+systemctl --user daemon-reload
+systemctl --user enable $SERVICE

themes/catppuccin/neovim.lua

@@ -1,13 +1,13 @@
 return {
-	{
-		"catppuccin/nvim",
-		name = "catppuccin",
-		priority = 1000,
-	},
-	{
-		"LazyVim/LazyVim",
-		opts = {
-			colorscheme = "catppuccin",
-		},
-	},
+  {
+    "catppuccin/nvim",
+    name = "catppuccin",
+    priority = 1000,
+  },
+  {
+    "LazyVim/LazyVim",
+    opts = {
+      colorscheme = "catppuccin",
+    },
+  },
 }

themes/lumon/colors.toml

@@ -1,5 +1,5 @@
 # Accent and UI colors
-accent = "#f2fcff"
+accent = "#8bc9eb"
 active_border_color = "#f2fcff"
 active_tab_background = "#6fb8e3"
 

themes/vantablack/btop.theme

@@ -1,5 +1,5 @@
 # Main background, empty for terminal default, need to be empty if you want transparent background
-theme[main_bg]="#0d0d0d"
+theme[main_bg]="#000000"
 
 # Main text color
 theme[main_fg]="#ffffff"

themes/vantablack/colors.toml

@@ -4,14 +4,14 @@ cursor = "#ffffff"
 
 # Primary colors
 foreground = "#ffffff"
-background = "#0d0d0d"
+background = "#000000"
 
 # Selection colors
-selection_foreground = "#0d0d0d"
+selection_foreground = "#000000"
 selection_background = "#ffffff"
 
 # Normal colors (ANSI 0-7)
-color0 = "#0d0d0d"
+color0 = "#000000"
 color1 = "#a4a4a4"
 color2 = "#b6b6b6"
 color3 = "#cecece"

version

@@ -1 +1 @@
-3.5.1
+3.6.0