Merge pull request #5192 from basecamp/rc

Omarchy 3.5.0

bin/omarchy-battery-capacity

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+# Returns the battery full capacity in Wh (rounded to whole number).
+# Used by omarchy-battery-status for displaying battery capacity.
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+echo "$battery_info" | awk '/energy-full:/ {
+    printf "%d", $2
+    exit
+}'

bin/omarchy-battery-monitor

@@ -9,6 +9,7 @@ BATTERY_STATE=$(upower -i $(upower -e | grep 'BAT') | grep -E "state" | awk '{pr
 
 send_notification() {
   notify-send -u critical "󱐋 Time to recharge!" "Battery is down to ${1}%" -i battery-caution -t 30000
+  omarchy-hook battery-low "$1"
 }
 
 if [[ -n $BATTERY_LEVEL && $BATTERY_LEVEL =~ ^[0-9]+$ ]]; then

bin/omarchy-battery-remaining-time

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Returns the battery time remaining (to empty or full) in a compact format.
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+echo "$battery_info" | awk '/time to (empty|full)/ {
+    value = $4
+    unit = $5
+    if (unit ~ /^minute/) {
+        printf "%dm", int(value)
+    } else {
+        hours = int(value)
+        minutes = int((value - hours) * 60)
+        if (minutes > 0) {
+            printf "%dh %dm", hours, minutes
+        } else {
+            printf "%dh", hours
+        }
+    }
+    exit
+}'

bin/omarchy-battery-status

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+# Returns a formatted battery status string with percentage and power draw/charge.
+# Used by the battery notification hotkey (Ctrl + Shift + Super + B).
+
+battery_info=$(upower -i $(upower -e | grep BAT))
+
+percentage=$(echo "$battery_info" | awk '/percentage/ {
+    print int($2)
+    exit
+}')
+
+power_rate=$(echo "$battery_info" | awk '/energy-rate/ {
+    rounded = sprintf("%.1f", $2)
+    sub(/\.0$/, "", rounded)
+    print rounded
+    exit
+}')
+
+state=$(echo "$battery_info" | awk '/state/ { print $2; exit }')
+time_remaining=$(omarchy-battery-remaining-time)
+capacity=$(omarchy-battery-capacity)
+
+if [[ $state == "charging" ]]; then
+    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} to full  ·   ${power_rate}W / ${capacity}Wh"
+else
+    echo "󰁹    Battery ${percentage}%  ·  ${time_remaining} left  ·   ${power_rate}W / ${capacity}Wh"
+fi

bin/omarchy-brightness-keyboard

@@ -23,14 +23,19 @@ fi
 max_brightness="$(brightnessctl -d "$device" max)"
 current_brightness="$(brightnessctl -d "$device" get)"
 
-# Calculate step as one unit (keyboards typically have discrete levels like 0-3).
+# Calculate step as 10% of max brightness. Keyboards with many levels (e.g. 512)
+# need larger steps; keyboards with few levels (e.g. 3) fall back to step=1.
+step=$(( max_brightness / 10 ))
+(( step < 1 )) && step=1
+
 if [[ $direction == "cycle" ]]; then
-  new_brightness=$(( (current_brightness + 1) % (max_brightness + 1) ))
+  new_brightness=$(( current_brightness + step ))
+  (( new_brightness > max_brightness )) && new_brightness=0
 elif [[ $direction == "up" ]]; then
-  new_brightness=$((current_brightness + 1))
+  new_brightness=$(( current_brightness + step ))
   (( new_brightness > max_brightness )) && new_brightness=$max_brightness
 else
-  new_brightness=$((current_brightness - 1))
+  new_brightness=$(( current_brightness - step ))
   (( new_brightness < 0 )) && new_brightness=0
 fi
 

bin/omarchy-cmd-screenrecord

@@ -2,6 +2,8 @@
 
 # Start and stop a screenrecording, which will be saved to ~/Videos by default.
 # Alternative location can be set via OMARCHY_SCREENRECORD_DIR or XDG_VIDEOS_DIR ENVs.
+# Resolution is capped to 4K for monitors above 4K, native otherwise.
+# Override via --resolution= (e.g. --resolution=1920x1080, --resolution=0x0 for native).
 
 [[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
 OUTPUT_DIR="${OMARCHY_SCREENRECORD_DIR:-${XDG_VIDEOS_DIR:-$HOME/Videos}}"
@@ -15,28 +17,27 @@ DESKTOP_AUDIO="false"
 MICROPHONE_AUDIO="false"
 WEBCAM="false"
 WEBCAM_DEVICE=""
+RESOLUTION=""
 STOP_RECORDING="false"
+RECORDING_FILE="/tmp/omarchy-screenrecord-filename"
 
 for arg in "$@"; do
   case "$arg" in
-    --with-desktop-audio) DESKTOP_AUDIO="true" ;;
-    --with-microphone-audio) MICROPHONE_AUDIO="true" ;;
-    --with-webcam) WEBCAM="true" ;;
-    --webcam-device=*) WEBCAM_DEVICE="${arg#*=}" ;;
-    --stop-recording) STOP_RECORDING="true"
+  --with-desktop-audio) DESKTOP_AUDIO="true" ;;
+  --with-microphone-audio) MICROPHONE_AUDIO="true" ;;
+  --with-webcam) WEBCAM="true" ;;
+  --webcam-device=*) WEBCAM_DEVICE="${arg#*=}" ;;
+  --resolution=*) RESOLUTION="${arg#*=}" ;;
+  --stop-recording) STOP_RECORDING="true" ;;
   esac
 done
 
-cleanup_webcam() {
-  pkill -f "WebcamOverlay" 2>/dev/null
-}
-
 start_webcam_overlay() {
   cleanup_webcam
 
   # Auto-detect first available webcam if none specified
   if [[ -z $WEBCAM_DEVICE ]]; then
-    WEBCAM_DEVICE=$(v4l2-ctl --list-devices 2>/dev/null | grep -m1 "^\s*/dev/video" | tr -d '\t')
+    WEBCAM_DEVICE=$(v4l2-ctl --list-devices 2>/dev/null | grep -m1 "^[[:space:]]*/dev/video" | tr -d '\t')
     if [[ -z $WEBCAM_DEVICE ]]; then
       notify-send "No webcam devices found" -u critical -t 3000
       return 1
@@ -62,7 +63,7 @@ start_webcam_overlay() {
   done
 
   ffplay -f v4l2 $video_size_arg -framerate 30 "$WEBCAM_DEVICE" \
-    -vf "scale=${target_width}:-1" \
+    -vf "crop=iw/2:ih,scale=${target_width}:-1" \
     -window_title "WebcamOverlay" \
     -noborder \
     -fflags nobuffer -flags low_delay \
@@ -71,10 +72,24 @@ start_webcam_overlay() {
   sleep 1
 }
 
+cleanup_webcam() {
+  pkill -f "WebcamOverlay" 2>/dev/null
+}
+
+default_resolution() {
+  local width height
+  read -r width height < <(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | "\(.width) \(.height)"')
+  if ((width > 3840 || height > 2160)); then
+    echo "3840x2160"
+  else
+    echo "0x0"
+  fi
+}
+
 start_screenrecording() {
   local filename="$OUTPUT_DIR/screenrecording-$(date +'%Y-%m-%d_%H-%M-%S').mp4"
   local audio_devices=""
-  local audio_args=""
+  local audio_args=()
 
   [[ $DESKTOP_AUDIO == "true" ]] && audio_devices+="default_output"
 
@@ -84,15 +99,71 @@ start_screenrecording() {
     audio_devices+="default_input"
   fi
 
-  [[ -n $audio_devices ]] && audio_args+="-a $audio_devices"
+  [[ -n $audio_devices ]] && audio_args+=(-a "$audio_devices" -ac aac)
+
+  local resolution="${RESOLUTION:-$(default_resolution)}"
+
+  gpu-screen-recorder -w portal -k auto -s "$resolution" -f 60 -fm cfr -fallback-cpu-encoding yes -o "$filename" "${audio_args[@]}" &
+  local pid=$!
+
+  # Wait for recording to actually start (file appears after portal selection)
+  while kill -0 $pid 2>/dev/null && [[ ! -f $filename ]]; do
+    sleep 0.2
+  done
+
+  if kill -0 $pid 2>/dev/null; then
+    echo "$filename" >"$RECORDING_FILE"
+    toggle_screenrecording_indicator
+  fi
+}
+
+stop_screenrecording() {
+  pkill -SIGINT -f "^gpu-screen-recorder" # SIGINT required to save video properly
+
+  # Wait a maximum of 5 seconds to finish before hard killing
+  local count=0
+  while pgrep -f "^gpu-screen-recorder" >/dev/null && ((count < 50)); do
+    sleep 0.1
+    count=$((count + 1))
+  done
 
-  gpu-screen-recorder -w portal -k h264 -f 60 -fallback-cpu-encoding yes -o "$filename" $audio_args -ac aac &
   toggle_screenrecording_indicator
+  cleanup_webcam
+
+  if pgrep -f "^gpu-screen-recorder" >/dev/null; then
+    pkill -9 -f "^gpu-screen-recorder"
+    notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
+  else
+    trim_first_frame
+    local filename=$(cat "$RECORDING_FILE" 2>/dev/null)
+    local preview="${filename%.mp4}-preview.png"
+
+    # Generate a preview thumbnail from the first frame
+    ffmpeg -y -i "$filename" -ss 00:00:00.1 -vframes 1 -q:v 2 "$preview" -loglevel quiet 2>/dev/null
+
+    (
+      ACTION=$(notify-send "Screen recording saved" "Open with Super + Alt + , (or click this)" -t 10000 -i "${preview:-$filename}" -A "default=open")
+      [[ $ACTION == "default" ]] && mpv "$filename"
+      rm -f "$preview"
+    ) &
+  fi
+
+  rm -f "$RECORDING_FILE"
+}
+
+toggle_screenrecording_indicator() {
+  pkill -RTMIN+8 waybar
+}
+
+screenrecording_active() {
+  pgrep -f "^gpu-screen-recorder" >/dev/null
 }
 
 trim_first_frame() {
-  local latest=$(ls -t "$OUTPUT_DIR"/screenrecording-*.mp4 2>/dev/null | head -1)
-  if [[ -n $latest ]]; then
+  local latest
+  latest=$(cat "$RECORDING_FILE" 2>/dev/null)
+
+  if [[ -n $latest && -f $latest ]]; then
     local trimmed="${latest%.mp4}-trimmed.mp4"
     if ffmpeg -y -ss 0.1 -i "$latest" -c copy "$trimmed" -loglevel quiet 2>/dev/null; then
       mv "$trimmed" "$latest"
@@ -102,46 +173,12 @@ trim_first_frame() {
   fi
 }
 
-stop_screenrecording() {
-  pkill -SIGINT -f "^gpu-screen-recorder"  # SIGINT required to save video properly
-
-  # Wait a maximum of 5 seconds to finish before hard killing
-  local count=0
-  while pgrep -f "^gpu-screen-recorder" >/dev/null && (( count < 50 )); do
-    sleep 0.1
-    count=$((count + 1))
-  done
-
-  if pgrep -f "^gpu-screen-recorder" >/dev/null; then
-    pkill -9 -f "^gpu-screen-recorder"
-    cleanup_webcam
-    notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
-  else
-    cleanup_webcam
-    trim_first_frame
-    notify-send "Screen recording saved to $OUTPUT_DIR" -t 2000
-  fi
-  toggle_screenrecording_indicator
-}
-
-toggle_screenrecording_indicator() {
-  pkill -RTMIN+8 waybar
-}
-
-screenrecording_active() {
-  pgrep -f "^gpu-screen-recorder" >/dev/null || pgrep -f "WebcamOverlay" >/dev/null
-}
-
 if screenrecording_active; then
-  if pgrep -f "WebcamOverlay" >/dev/null && ! pgrep -f "^gpu-screen-recorder" >/dev/null; then
-    cleanup_webcam
-  else
-    stop_screenrecording
-  fi
-elif [[ $STOP_RECORDING == "false" ]]; then
+  stop_screenrecording
+elif [[ $STOP_RECORDING == "true" ]]; then
+  exit 1
+else
   [[ $WEBCAM == "true" ]] && start_webcam_overlay
 
   start_screenrecording || cleanup_webcam
-else
-  exit 1
 fi

bin/omarchy-cmd-screenshot

@@ -8,8 +8,8 @@
 OUTPUT_DIR="${OMARCHY_SCREENSHOT_DIR:-${XDG_PICTURES_DIR:-$HOME/Pictures}}"
 
 if [[ ! -d $OUTPUT_DIR ]]; then
-  notify-send "Screenshot directory does not exist: $OUTPUT_DIR" -u critical -t 3000
-  exit 1
+  mkdir -p "$OUTPUT_DIR"
+  notify-send "Created screenshot directory: $OUTPUT_DIR" -u normal -t 2000
 fi
 
 pkill slurp && exit 0
@@ -65,27 +65,30 @@ get_rectangles() {
 
 # Select based on mode
 case "$MODE" in
-  region)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(slurp 2>/dev/null)
-    kill $PID 2>/dev/null
-    ;;
-  windows)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
-    kill $PID 2>/dev/null
-    ;;
-  fullscreen)
-    SELECTION=$(hyprctl monitors -j | jq -r "${JQ_MONITOR_GEO} .[] | select(.focused == true) | format_geo")
-    ;;
-  smart|*)
-    RECTS=$(get_rectangles)
-    hyprpicker -r -z >/dev/null 2>&1 & PID=$!
-    sleep .1
-    SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
-    kill $PID 2>/dev/null
+region)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(slurp 2>/dev/null)
+  kill $PID 2>/dev/null
+  ;;
+windows)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(get_rectangles | slurp -r 2>/dev/null)
+  kill $PID 2>/dev/null
+  ;;
+fullscreen)
+  SELECTION=$(hyprctl monitors -j | jq -r "${JQ_MONITOR_GEO} .[] | select(.focused == true) | format_geo")
+  ;;
+smart | *)
+  RECTS=$(get_rectangles)
+  hyprpicker -r -z >/dev/null 2>&1 &
+  PID=$!
+  sleep .1
+  SELECTION=$(echo "$RECTS" | slurp 2>/dev/null)
+  kill $PID 2>/dev/null
 
   # If the selection area is L * W < 20, we'll assume you were trying to select whichever
   # window or output it was inside of to prevent accidental 2px snapshots

bin/omarchy-font-set

@@ -33,7 +33,7 @@ if [[ -n $font_name ]]; then
     omarchy-restart-swayosd
 
     if pgrep -x ghostty; then
-      notify-send "    You must restart Ghostty to see font change"
+      notify-send -u low "    You must restart Ghostty to see font change"
     fi
 
     omarchy-hook font-set "$font_name"

bin/omarchy-haptic-touchpad

@@ -0,0 +1,95 @@
+#!/usr/bin/env python3
+
+"""Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
+
+Monitors touchpad button press events and sends haptic pulses via HID
+feature reports. Required because the kernel's HID haptic subsystem only
+supports Auto Trigger with waveform enumeration, not the simpler Manual
+Trigger protocol used by these Synaptics touchpads.
+"""
+
+import fcntl, glob, os, struct, sys
+
+VENDOR = "06CB"
+PRODUCT = "D01A"
+REPORT_ID = 0x37
+INTENSITY = 40  # 0-100
+
+# input_event: struct timeval (16 bytes on 64-bit) + type(H) + code(H) + value(i)
+EVENT_FORMAT = "llHHi"
+EVENT_SIZE = struct.calcsize(EVENT_FORMAT)
+EV_KEY = 0x01
+BTN_LEFT = 272
+BTN_RIGHT = 273
+BTN_MIDDLE = 274
+
+# ioctl: HIDIOCSFEATURE(len) = _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+def HIDIOCSFEATURE(length):
+    return 0xC0000000 | (length << 16) | (ord("H") << 8) | 0x06
+
+
+def find_hidraw():
+    for path in sorted(glob.glob("/sys/class/hidraw/hidraw*")):
+        uevent = os.path.join(path, "device", "uevent")
+        try:
+            with open(uevent) as f:
+                content = f.read().upper()
+            if f"0000{VENDOR}" in content and f"0000{PRODUCT}" in content:
+                return os.path.join("/dev", os.path.basename(path))
+        except OSError:
+            continue
+    return None
+
+
+def find_touchpad_event():
+    for path in sorted(glob.glob("/sys/class/input/event*/device/name")):
+        try:
+            with open(path) as f:
+                name = f.read().strip().upper()
+            if VENDOR in name and PRODUCT in name and "TOUCHPAD" in name:
+                event = path.split("/")[-3]
+                return os.path.join("/dev/input", event)
+        except OSError:
+            continue
+    return None
+
+
+def main():
+    hidraw = find_hidraw()
+    if not hidraw:
+        print("No Synaptics haptic touchpad hidraw device found", file=sys.stderr)
+        sys.exit(1)
+
+    event = find_touchpad_event()
+    if not event:
+        print("No Synaptics haptic touchpad input device found", file=sys.stderr)
+        sys.exit(1)
+
+    print(f"Haptic touchpad: hidraw={hidraw} input={event} intensity={INTENSITY}", flush=True)
+
+    haptic_report = struct.pack("BB", REPORT_ID, INTENSITY)
+    ioctl_req = HIDIOCSFEATURE(len(haptic_report))
+
+    hidraw_fd = os.open(hidraw, os.O_RDWR)
+    event_fd = os.open(event, os.O_RDONLY)
+
+    try:
+        while True:
+            data = os.read(event_fd, EVENT_SIZE)
+            if len(data) < EVENT_SIZE:
+                continue
+            _, _, ev_type, code, value = struct.unpack(EVENT_FORMAT, data)
+            if ev_type == EV_KEY and code in (BTN_LEFT, BTN_RIGHT, BTN_MIDDLE) and value == 1:
+                try:
+                    fcntl.ioctl(hidraw_fd, ioctl_req, haptic_report)
+                except OSError:
+                    pass
+    except KeyboardInterrupt:
+        pass
+    finally:
+        os.close(event_fd)
+        os.close(hidraw_fd)
+
+
+if __name__ == "__main__":
+    main()

bin/omarchy-hibernation-setup

@@ -73,9 +73,10 @@ if [[ ! -f $RESUME_DROP_IN ]]; then
   echo "Adding resume kernel parameters"
   sudo swapon -p 0 "$SWAP_FILE" 2>/dev/null
   RESUME_DEVICE=$(findmnt -no SOURCE -T "$SWAP_FILE" | sed 's/\[.*\]//')
-  RESUME_OFFSET=$(btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
+  RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
   sudo mkdir -p /etc/limine-entry-tool.d
-  echo "KERNEL_CMDLINE[default]+=\"resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+  echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+  sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
 fi
 
 # Use ACPI alarm for RTC wakeup on s2idle systems (needed for suspend-then-hibernate)
@@ -84,7 +85,8 @@ if grep -q "\[s2idle\]" /sys/power/mem_sleep 2>/dev/null; then
   if [[ ! -f $LIMINE_DROP_IN ]]; then
     echo "Enabling ACPI RTC alarm for s2idle suspend"
     sudo mkdir -p /etc/limine-entry-tool.d
-    echo 'KERNEL_CMDLINE[default]+="rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
+    echo 'KERNEL_CMDLINE[default]+=" rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
+    sudo tee -a /etc/default/limine < "$LIMINE_DROP_IN" >/dev/null
   fi
 fi
 

bin/omarchy-hw-framework16

@@ -3,4 +3,4 @@
 # Detect whether the computer is a Framework Laptop 16.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Framework" ]] &&
-  grep -q "Laptop 16" /sys/class/dmi/id/product_name 2>/dev/null
+  omarchy-hw-match "Laptop 16"

bin/omarchy-hw-intel

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Detect whether the computer has an Intel CPU.
+
+[[ $(grep -m1 "vendor_id" /proc/cpuinfo 2>/dev/null | cut -d: -f2 | tr -d ' ') == "GenuineIntel" ]]

bin/omarchy-hw-intel-ptl

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Detect whether the computer has an Intel Panther Lake GPU.
+
+lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'

bin/omarchy-hw-match

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# Match against the computer's DMI product name (case-insensitive).
+# Usage: omarchy-hw-match "XPS"
+
+grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null

bin/omarchy-hw-surface

@@ -3,4 +3,4 @@
 # Detect whether the computer is a Microsoft Surface device.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Microsoft Corporation" ]] &&
-  grep -q "Surface" /sys/class/dmi/id/product_name 2>/dev/null
+  omarchy-hw-match "Surface"

bin/omarchy-hw-vulkan

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# Detect whether Vulkan is available.
+
+[[ -d /usr/share/vulkan/icd.d ]] &&
+  find /usr/share/vulkan/icd.d -maxdepth 1 -name "*.json" -print -quit | grep -q .

bin/omarchy-hyprland-active-window-transparency-toggle

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Toggles transparency for the currently focused window.
+
+hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -4,6 +4,9 @@
 MONITOR_INFO=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)')
 ACTIVE_MONITOR=$(echo "$MONITOR_INFO" | jq -r '.name')
 CURRENT_SCALE=$(echo "$MONITOR_INFO" | jq -r '.scale')
+WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
+HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
+REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
 
 # Cycle through scales: 1 → 1.6 → 2 → 3 → 1
 CURRENT_INT=$(awk -v s="$CURRENT_SCALE" 'BEGIN { printf "%.0f", s * 10 }')
@@ -16,6 +19,6 @@ case "$CURRENT_INT" in
 esac
 
 hyprctl keyword misc:disable_scale_notification true
-hyprctl keyword monitor "$ACTIVE_MONITOR,preferred,auto,$NEW_SCALE"
+hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
 hyprctl keyword misc:disable_scale_notification false
-notify-send "󰍹    Display scaling set to ${NEW_SCALE}x"
+notify-send -u low "󰍹    Display scaling set to ${NEW_SCALE}x"

bin/omarchy-hyprland-window-single-square-aspect-toggle

@@ -1,13 +1,13 @@
 #!/bin/bash
 
 # Check current single_window_aspect_ratio setting
-CURRENT_VALUE=$(hyprctl getoption "dwindle:single_window_aspect_ratio" 2>/dev/null | head -1)
+CURRENT_VALUE=$(hyprctl getoption "layout:single_window_aspect_ratio" 2>/dev/null | head -1)
 
 # Parse vec2 output: "vec2: [1, 1]" or "vec2: [0, 0]"
 if [[ $CURRENT_VALUE == *"[1, 1]"* ]]; then
-  hyprctl keyword dwindle:single_window_aspect_ratio "0 0"
-  notify-send "    Disable single-window square aspect ratio"
+  hyprctl keyword layout:single_window_aspect_ratio "0 0"
+  notify-send -u low "    Disable single-window square aspect ratio"
 else
-  hyprctl keyword dwindle:single_window_aspect_ratio "1 1"
-  notify-send "    Enable single-window square aspect"
+  hyprctl keyword layout:single_window_aspect_ratio "1 1"
+  notify-send -u low "    Enable single-window square aspect"
 fi

bin/omarchy-hyprland-workspace-layout-toggle

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+# Toggle the layout on the current active workspace between dwindle and scrolling
+
+ACTIVE_WORKSPACE=$(hyprctl activeworkspace -j | jq -r '.id')
+CURRENT_LAYOUT=$(hyprctl activeworkspace -j | jq -r '.tiledLayout')
+
+case "$CURRENT_LAYOUT" in
+  dwindle) NEW_LAYOUT=scrolling ;;
+  *) NEW_LAYOUT=dwindle ;;
+esac
+
+hyprctl keyword workspace $ACTIVE_WORKSPACE, layout:$NEW_LAYOUT
+notify-send -u low "󱂬    Workspace layout set to $NEW_LAYOUT"

bin/omarchy-install-dev-env

@@ -50,9 +50,9 @@ case "$1" in
 ruby)
   echo -e "Installing Ruby on Rails...\n"
   omarchy-pkg-add libyaml
-  mise use --global ruby@latest
-  mise settings add idiomatic_version_file_enable_tools ruby
   mise settings add ruby.compile false
+  mise settings add idiomatic_version_file_enable_tools ruby
+  mise use --global ruby@latest
   echo "gem: --no-document" >~/.gemrc
   mise x ruby -- gem install rails --no-document
   echo -e "\nYou can now run: rails new myproject"

bin/omarchy-install-nordvpn

@@ -14,4 +14,4 @@ sudo usermod -aG nordvpn "$USER"
 echo -e "\nNordVPN installed! After reboot, run 'nordvpn login' to authenticate."
 
 echo
-gum confirm "Reboot now to make NordVPN usable?" && sudo reboot now
+gum confirm "Reboot now to make NordVPN usable?" && omarchy-system-reboot

bin/omarchy-install-once

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+# Install the ONCE service, enable its background service, and launch the TUI.
+
+echo "Installing ONCE..."
+omarchy-pkg-add once-bin
+
+echo "Enabling ONCE background service..."
+sudo systemctl enable --now once-background.service
+
+echo -e "\nLaunching ONCE..."
+once

bin/omarchy-launch-or-focus

@@ -10,7 +10,7 @@ fi
 
 WINDOW_PATTERN="$1"
 LAUNCH_COMMAND="${2:-"uwsm-app -- $WINDOW_PATTERN"}"
-WINDOW_ADDRESS=$(hyprctl clients -j | jq -r --arg p "$WINDOW_PATTERN" '.[]|select((.class|test("\\b" + p + "\\b";"i")) or (.title|test("\\b" + $p + "\\b";"i")))|.address' | head -n1)
+WINDOW_ADDRESS=$(hyprctl clients -j | jq -r --arg p "$WINDOW_PATTERN" '.[]|select((.class|test("\\b" + $p + "\\b";"i")) or (.title|test("\\b" + $p + "\\b";"i")))|.address' | head -n1)
 
 if [[ -n $WINDOW_ADDRESS ]]; then
   hyprctl dispatch focuswindow "address:$WINDOW_ADDRESS"

bin/omarchy-launch-screensaver

@@ -46,7 +46,7 @@ for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
       -e omarchy-cmd-screensaver
     ;;
   *)
-    notify-send "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
+    notify-send -u low "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
     ;;
   esac
 done

bin/omarchy-menu

@@ -19,6 +19,13 @@ back_to() {
   fi
 }
 
+toggle_existing_menu() {
+  if pgrep -f "walker.*--dmenu" >/dev/null; then
+    walker --close >/dev/null 2>&1
+    exit 0
+  fi
+}
+
 menu() {
   local prompt="$1"
   local options="$2"
@@ -47,7 +54,7 @@ present_terminal() {
 }
 
 open_in_editor() {
-  notify-send "Editing config file" "$1"
+  notify-send -u low "Editing config file" "$1"
   omarchy-launch-editor "$1"
 }
 
@@ -102,7 +109,7 @@ show_capture_menu() {
   *Screenshot*) omarchy-cmd-screenshot ;;
   *Screenrecord*) show_screenrecord_menu ;;
   *Color*) pkill hyprpicker || hyprpicker -a ;;
-  *) show_trigger_menu ;;
+  *) back_to show_trigger_menu ;;
   esac
 }
 
@@ -161,12 +168,17 @@ show_share_menu() {
 }
 
 show_toggle_menu() {
-  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar") in
+  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Display Scaling") in
+
   *Screensaver*) omarchy-toggle-screensaver ;;
   *Nightlight*) omarchy-toggle-nightlight ;;
   *Idle*) omarchy-toggle-idle ;;
   *Bar*) omarchy-toggle-waybar ;;
-  *) show_trigger_menu ;;
+  *Layout*) omarchy-hyprland-workspace-layout-toggle ;;
+  *Ratio*) omarchy-hyprland-window-single-square-aspect-toggle ;;
+  *Gaps*) omarchy-hyprland-window-gaps-toggle ;;
+  *Scaling*) omarchy-hyprland-monitor-scaling-cycle ;;
+  *) back_to show_trigger_menu ;;
   esac
 }
 
@@ -209,6 +221,7 @@ show_font_menu() {
 show_setup_menu() {
   local options="  Audio\n  Wifi\n󰂯  Bluetooth\n󱐋  Power Profile\n  System Sleep\n󰍹  Monitors"
   [[ -f ~/.config/hypr/bindings.conf ]] && options="$options\n  Keybindings"
+  options="$options\n  Key Remapping"
   [[ -f ~/.config/hypr/input.conf ]] && options="$options\n  Input"
   options="$options\n󰱔  DNS\n  Security\n  Config"
 
@@ -221,6 +234,7 @@ show_setup_menu() {
   *Monitors*) open_in_editor ~/.config/hypr/monitors.conf ;;
   *Keybindings*) open_in_editor ~/.config/hypr/bindings.conf ;;
   *Input*) open_in_editor ~/.config/hypr/input.conf ;;
+  *Key\ Remapping*) omarchy-setup-makima && open_in_editor "$HOME/.config/makima/AT Translated Set 2 keyboard.toml" && omarchy-restart-makima ;;
   *DNS*) present_terminal omarchy-setup-dns ;;
   *Security*) show_setup_security_menu ;;
   *Config*) show_setup_config_menu ;;
@@ -303,10 +317,11 @@ show_install_menu() {
 }
 
 show_install_service_menu() {
-  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN\n󰟵  Bitwarden\n  Chromium Account") in
+  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN [AUR]\n󰏖  ONCE\n󰟵  Bitwarden\n  Chromium Account") in
   *Dropbox*) present_terminal omarchy-install-dropbox ;;
   *Tailscale*) present_terminal omarchy-install-tailscale ;;
   *NordVPN*) present_terminal omarchy-install-nordvpn ;;
+  *ONCE*) present_terminal omarchy-install-once ;;
   *Bitwarden*) install_and_launch "Bitwarden" "bitwarden bitwarden-cli" "bitwarden" ;;
   *Chromium*) present_terminal omarchy-install-chromium-google-account ;;
   *) show_install_menu ;;
@@ -341,14 +356,9 @@ show_install_ai_menu() {
       echo ollama
   )
 
-  case $(menu "Install" "  Dictation\n󱚤  Claude Code\n󱚤  Codex\n󱚤  Gemini CLI\n󱚤  Copilot CLI\n󱚤  Cursor CLI\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
+  case $(menu "Install" "  Dictation\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
   *Dictation*) present_terminal omarchy-voxtype-install ;;
-  *Claude*) install "Claude Code" "claude-code" ;;
-  *Codex*) install "Codex" "openai-codex" ;;
-  *Gemini*) install "Gemini CLI" "gemini-cli" ;;
-  *Copilot*) install "Copilot CLI" "github-copilot-cli" ;;
-  *Cursor*) install "Cursor CLI" "cursor-cli" ;;
-  *Studio*) install "LM Studio" "lmstudio" ;;
+  *Studio*) install "LM Studio" "lmstudio-bin" ;;
   *Ollama*) install "Ollama" $ollama_pkg ;;
   *Crush*) install "Crush" "crush-bin" ;;
   *) show_install_menu ;;
@@ -593,6 +603,7 @@ go_to_menu() {
   *apps*) walker -p "Launch…" ;;
   *learn*) show_learn_menu ;;
   *trigger*) show_trigger_menu ;;
+  *toggle*) show_toggle_menu ;;
   *share*) show_share_menu ;;
   *background*) show_background_menu ;;
   *capture*) show_capture_menu ;;
@@ -613,6 +624,8 @@ go_to_menu() {
 USER_EXTENSIONS="$HOME/.config/omarchy/extensions/menu.sh"
 [[ -f $USER_EXTENSIONS ]] && source "$USER_EXTENSIONS"
 
+toggle_existing_menu
+
 if [[ -n $1 ]]; then
   BACK_TO_EXIT=true
   go_to_menu "$1"

bin/omarchy-npx-install

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+# Install an npx wrapper for a given npm package.
+# Usage: omarchy-npx-install <package> [command-name]
+#
+# If command-name is omitted, it defaults to the package name.
+# Example: omarchy-npx-install opencode-ai opencode
+
+if [[ -z $1 ]]; then
+  echo "Usage: omarchy-npx-install <package> [command-name]"
+  exit 1
+fi
+
+package=$1
+command=${2:-$1}
+
+mkdir -p "$HOME/.local/bin"
+
+cat > "$HOME/.local/bin/$command" <<EOF
+#!/bin/bash
+exec npx --yes $package "\$@"
+EOF
+
+chmod +x "$HOME/.local/bin/$command"

bin/omarchy-pkg-aur-install

@@ -20,7 +20,8 @@ pkg_names=$(yay -Slqa | fzf "${fzf_args[@]}")
 
 if [[ -n $pkg_names ]]; then
   # Add aur/ prefix to each package name and convert to space-separated for yay
-  sudo -v
+  source omarchy-sudo-keepalive
+
   echo "$pkg_names" | sed 's/^/aur\//' | tr '\n' ' ' | xargs yay -S --noconfirm
   sudo updatedb
   omarchy-show-done

bin/omarchy-pkg-install

@@ -17,7 +17,9 @@ fzf_args=(
 pkg_names=$(pacman -Slq | fzf "${fzf_args[@]}")
 
 if [[ -n $pkg_names ]]; then
-  # Convert newline-separated selections to space-separated for yay
+  source omarchy-sudo-keepalive
+
+  # Convert newline-separated selections to space-separated for pacman
   echo "$pkg_names" | tr '\n' ' ' | xargs sudo pacman -S --noconfirm
   omarchy-show-done
 fi

bin/omarchy-refresh-tmux

@@ -3,7 +3,4 @@
 # Overwrite the user tmux config with the Omarchy default and reload tmux.
 
 omarchy-refresh-config tmux/tmux.conf
-
-if pgrep -x tmux; then
-  tmux source-file ~/.config/tmux/tmux.conf
-fi
+omarchy-restart-tmux

bin/omarchy-reinstall-git

@@ -3,6 +3,6 @@ set -e
 
 # Reinstall the Omarchy configuration directory from the git source.
 
-git clone "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
+git clone --depth=1 "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
 mv $OMARCHY_PATH ~/.local/share/omarchy-old
 mv ~/.local/share/omarchy-new $OMARCHY_PATH

bin/omarchy-remove-preinstalls

@@ -13,6 +13,10 @@ if gum confirm "Are you sure you want to remove all preinstalled web apps, TUI w
   cp "$OMARCHY_PATH/default/hypr/plain-bindings.conf" ~/.config/hypr/bindings.conf
   hyprctl reload
 
+  # Remove npx stubs
+  rm -f ~/.local/bin/codex ~/.local/bin/gemini ~/.local/bin/copilot \
+       ~/.local/bin/opencode ~/.local/bin/playwright-cli ~/.local/bin/pi
+
   omarchy-pkg-drop \
     aether \
     typora \

bin/omarchy-restart-makima

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Restart makima - key remapping service for remapping Copilot key to Omarchy Menu
+
+sudo systemctl restart makima

bin/omarchy-restart-tmux

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Restart tmux if running with the latest configuration
+
+if pgrep -x tmux; then
+  tmux source-file ~/.config/tmux/tmux.conf
+fi

bin/omarchy-restart-trackpad

@@ -0,0 +1,8 @@
+#!/bin/bash
+
+# Reload the intel_quicki2c driver to fix a dead trackpad.
+# The THC (Touch Host Controller) can fail to initialize interrupts
+# during boot or after suspend, leaving the trackpad registered but
+# not delivering events.
+
+sudo modprobe -r intel_quicki2c && sudo modprobe intel_quicki2c

bin/omarchy-setup-makima

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Setup makima - key remapping service for remapping Copilot key to Omarchy Menu
+
+CONFIG_FILE="$HOME/.config/makima/AT Translated Set 2 keyboard.toml"
+
+if [[ ! -f $CONFIG_FILE ]]; then
+  omarchy-pkg-add makima-bin
+
+  mkdir -p "$HOME/.config/makima"
+  cp "$OMARCHY_PATH/default/makima/AT Translated Set 2 keyboard.toml" "$CONFIG_FILE"
+
+  sudo mkdir -p /etc/systemd/system/makima.service.d
+  sudo tee /etc/systemd/system/makima.service.d/override.conf >/dev/null <<EOF
+[Service]
+User=$USER
+Environment="MAKIMA_CONFIG=/home/$USER/.config/makima"
+EOF
+
+  sudo systemctl daemon-reload
+  sudo systemctl enable --now makima 2>/dev/null || true
+fi

bin/omarchy-sudo-keepalive

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# Prompt for sudo once and keep the credential alive in the background.
+# Source this script so the trap applies to the calling shell:
+#   source omarchy-sudo-keepalive
+
+sudo -v
+while true; do sudo -n true; sleep 60; done 2>/dev/null &
+SUDO_KEEPALIVE_PID=$!
+trap "kill $SUDO_KEEPALIVE_PID 2>/dev/null" EXIT

bin/omarchy-sudo-passwordless-toggle

@@ -0,0 +1,43 @@
+#!/bin/bash
+
+# Toggle passwordless sudo for the current user.
+# First run: enables passwordless sudo for 15 minutes (after confirmation).
+# Second run: disables it early.
+
+NOPASSWD_FILE="/etc/sudoers.d/99-omarchy-nopasswd-${USER}"
+TIMER_NAME="omarchy-nopasswd-expire-${USER}"
+
+# Safety: if the file exists but the timer doesn't (e.g. after reboot), clean up
+if sudo test -f "$NOPASSWD_FILE" && ! systemctl is-active "${TIMER_NAME}.timer" &>/dev/null; then
+  sudo rm "$NOPASSWD_FILE"
+fi
+
+# Check for the file directly — sudo -n can stay cached or be granted by other rules
+if sudo test -f "$NOPASSWD_FILE"; then
+  sudo rm "$NOPASSWD_FILE"
+  sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
+  echo "Passwordless sudo has been DISABLED. Sudo will require a password again."
+else
+  echo ""
+  echo "⚠️  WARNING: This will allow ANY process running as your user to"
+  echo "execute ANY command as root WITHOUT a password for 15 minutes."
+  echo ""
+  echo "This is useful for AI agents that need to run sudo commands,"
+  echo "but it significantly weakens the security of your system."
+  echo "Anyone or anything with access to your user account gets full root."
+  echo ""
+  echo "Passwordless sudo will automatically disable after 15 minutes."
+  echo "Run this command again to disable it early."
+  echo ""
+
+  if gum confirm "Enable passwordless sudo for 15 minutes? This is a significant security risk!"; then
+    echo "${USER} ALL=(ALL) NOPASSWD: ALL" | sudo tee "$NOPASSWD_FILE" > /dev/null
+    sudo chmod 440 "$NOPASSWD_FILE"
+    sudo systemd-run --on-active=15m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
+      rm "$NOPASSWD_FILE"
+    echo "Passwordless sudo has been ENABLED. It will automatically disable in 15 minutes."
+    echo "Note: if you restart before then, run omarchy-sudo-passwordless-toggle again to disable it."
+  else
+    echo "Aborted. No changes made."
+  fi
+fi

bin/omarchy-theme-set-browser

@@ -13,12 +13,12 @@ if omarchy-cmd-present chromium || omarchy-cmd-present brave; then
   fi
 
   if omarchy-cmd-present chromium; then
-    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
+    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
     chromium --refresh-platform-policy --no-startup-window >/dev/null
   fi
 
   if omarchy-cmd-present brave; then
-    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
+    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
     brave --refresh-platform-policy --no-startup-window >/dev/null
   fi
 fi

bin/omarchy-theme-set-vscode

@@ -35,5 +35,6 @@ set_theme() {
 }
 
 set_theme "code" "$HOME/.config/Code/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-vscode-theme-changes"
+set_theme "code-insiders" "$HOME/.config/Code - Insiders/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-vscode-insiders-theme-changes"
 set_theme "codium" "$HOME/.config/VSCodium/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-codium-theme-changes"
 set_theme "cursor" "$HOME/.config/Cursor/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-cursor-theme-changes"

bin/omarchy-toggle-idle

@@ -2,10 +2,10 @@
 
 if pgrep -x hypridle >/dev/null; then
   pkill -x hypridle
-  notify-send "󱫖    Stop locking computer when idle"
+  notify-send -u low "󱫖    Stop locking computer when idle"
 else
   uwsm-app -- hypridle >/dev/null 2>&1 &
-  notify-send "󱫖    Now locking computer when idle"
+  notify-send -u low "󱫖    Now locking computer when idle"
 fi
 
 pkill -RTMIN+9 waybar

bin/omarchy-toggle-nightlight

@@ -21,10 +21,10 @@ restart_nightlighted_waybar() {
 
 if [[ $CURRENT_TEMP == $OFF_TEMP ]]; then
   hyprctl hyprsunset temperature $ON_TEMP
-  notify-send "  Nightlight screen temperature"
+  notify-send -u low "  Nightlight screen temperature"
   restart_nightlighted_waybar
 else
   hyprctl hyprsunset temperature $OFF_TEMP
-  notify-send "   Daylight screen temperature"
+  notify-send -u low "   Daylight screen temperature"
   restart_nightlighted_waybar
 fi

bin/omarchy-toggle-notification-silencing

@@ -3,9 +3,9 @@
 makoctl mode -t do-not-disturb
 
 if makoctl mode | grep -q 'do-not-disturb'; then
-  notify-send "󰂛    Silenced notifications"
+  notify-send -u low "󰂛    Silenced notifications"
 else
-  notify-send "󰂚    Enabled notifications"
+  notify-send -u low "󰂚    Enabled notifications"
 fi
 
 pkill -RTMIN+10 waybar

bin/omarchy-toggle-screensaver

@@ -4,9 +4,9 @@ STATE_FILE=~/.local/state/omarchy/toggles/screensaver-off
 
 if [[ -f $STATE_FILE ]]; then
   rm -f $STATE_FILE
-  notify-send "󱄄   Screensaver enabled"
+  notify-send -u low "󱄄   Screensaver enabled"
 else
   mkdir -p "$(dirname $STATE_FILE)"
   touch $STATE_FILE
-  notify-send "󱄄   Screensaver disabled"
+  notify-send -u low "󱄄   Screensaver disabled"
 fi

bin/omarchy-toggle-suspend

@@ -4,9 +4,9 @@ STATE_FILE=~/.local/state/omarchy/toggles/suspend-off
 
 if [[ -f $STATE_FILE ]]; then
   rm -f $STATE_FILE
-  notify-send "󰒲   Suspend now available in system menu"
+  notify-send -u low "󰒲   Suspend now available in system menu"
 else
   mkdir -p "$(dirname $STATE_FILE)"
   touch $STATE_FILE
-  notify-send "󰒲   Suspend removed from system menu"
+  notify-send -u low "󰒲   Suspend removed from system menu"
 fi

bin/omarchy-update

@@ -5,7 +5,7 @@ set -e
 trap 'echo ""; echo -e "\033[0;31mSomething went wrong during the update!\n\nPlease review the output above carefully, correct the error, and retry the update.\n\nIf you need assistance, get help from the community at https://omarchy.org/discord\033[0m"' ERR
 
 if [[ $1 == "-y" ]] || omarchy-update-confirm; then
-  omarchy-snapshot create || (( $? == 127 ))
+  omarchy-snapshot create || (($? == 127))
   omarchy-update-git
   omarchy-update-perform
 fi

bin/omarchy-update-firmware

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Update system firmware using fwupd. Ensures the fwupd EFI binary is installed
+# in the ESP so UEFI capsule updates work with the Limine bootloader.
+
 set -e
 echo -e "\e[32mUpdate Firmware\e[0m"
 
@@ -7,5 +10,9 @@ if omarchy-cmd-missing fwupdmgr; then
   omarchy-pkg-add fwupd
 fi
 
+if [[ -d /sys/firmware/efi ]] && [[ -f /usr/lib/fwupd/efi/fwupdx64.efi ]]; then
+  sudo install -D /usr/lib/fwupd/efi/fwupdx64.efi /boot/EFI/arch/fwupdx64.efi
+fi
+
 fwupdmgr refresh --force
 sudo fwupdmgr update

bin/omarchy-update-git

@@ -4,5 +4,7 @@ set -e
 
 echo -e "\e[32mUpdate Omarchy\e[0m"
 
+omarchy-update-time
+
 git -C $OMARCHY_PATH pull --autostash
 git -C $OMARCHY_PATH --no-pager diff --check || git -C $OMARCHY_PATH reset --merge

bin/omarchy-update-perform

@@ -2,14 +2,17 @@
 
 set -e
 
-# Ensure screensaver/sleep doesn't set in during updates
-hyprctl dispatch tagwindow +noidle &> /dev/null || true
+# Run the update inside a PTY so pacman/yay keep showing download progress
+# while still logging the full session for later analysis.
+if [[ -z $OMARCHY_UPDATE_LOGGED ]]; then
+  script_command=$(printf '%q ' "$0" "$@")
+  exec env OMARCHY_UPDATE_LOGGED=1 script -qefc "$script_command" "/tmp/omarchy-update.log"
+fi
 
-# Capture update logs
-exec > >(tee "/tmp/omarchy-update.log") 2>&1
+# Ensure screensaver/sleep doesn't set in during updates
+hyprctl dispatch tagwindow +noidle &>/dev/null || true
 
 # Perform all update steps
-omarchy-update-time
 omarchy-update-keyring
 omarchy-update-available-reset
 omarchy-update-system-pkgs
@@ -23,4 +26,4 @@ omarchy-update-analyze-logs
 omarchy-update-restart
 
 # Re-enable screensaver/sleep after updates
-hyprctl dispatch tagwindow -- -noidle &> /dev/null || true
+hyprctl dispatch tagwindow -- -noidle &>/dev/null || true

bin/omarchy-update-restart

@@ -1,11 +1,18 @@
 #!/bin/bash
 
+echo
+
 if [[ ! -d /usr/lib/modules/$(uname -r) ]]; then
   gum confirm "Linux kernel has been updated. Reboot?" && omarchy-system-reboot
 elif [[ -f $HOME/.local/state/omarchy/reboot-required ]]; then
   gum confirm "Updates require reboot. Ready?" && omarchy-system-reboot
 fi
 
+running_hyprland=$(readlink /proc/$(pgrep -x Hyprland)/exe 2>/dev/null)
+if [[ $running_hyprland == *"(deleted)"* ]]; then
+  gum confirm "Hyprland has been updated. Reboot?" && omarchy-system-reboot
+fi
+
 for file in "$HOME"/.local/state/omarchy/restart-*-required; do
   if [[ -f $file ]]; then
     filename=$(basename "$file")

bin/omarchy-voxtype-install

@@ -11,6 +11,9 @@ if gum confirm "Install Voxtype + AI model (~150MB) to enable dictation?"; then
   cp $OMARCHY_PATH/default/voxtype/config.toml ~/.config/voxtype/
 
   voxtype setup --download --no-post-install
+  if omarchy-hw-vulkan; then
+    voxtype setup gpu --enable || true
+  fi
   voxtype setup systemd
 
   omarchy-restart-waybar

config/alacritty/alacritty.toml

@@ -20,5 +20,6 @@ decorations = "None"
 [keyboard]
 bindings = [
 { key = "Insert", mods = "Shift", action = "Paste" },
-{ key = "Insert", mods = "Control", action = "Copy" }
+{ key = "Insert", mods = "Control", action = "Copy" },
+{ key = "Return", mods = "Shift", chars = "\u001B\r" }
 ]

config/hypr/bindings.conf

@@ -1,6 +1,7 @@
 # Application bindings
 bindd = SUPER, RETURN, Terminal, exec, uwsm-app -- xdg-terminal-exec --dir="$(omarchy-cmd-terminal-cwd)"
-bindd = SUPER ALT, RETURN, Tmux, exec, uwsm-app -- xdg-terminal-exec --dir="$(omarchy-cmd-terminal-cwd)" tmux new
+bindd = SUPER ALT, RETURN, Tmux, exec, uwsm-app -- xdg-terminal-exec --dir="$(omarchy-cmd-terminal-cwd)" bash -c "tmux attach || tmux new -s Work"
+bindd = SUPER SHIFT, RETURN, Browser, exec, omarchy-launch-browser
 bindd = SUPER SHIFT, F, File manager, exec, uwsm-app -- nautilus --new-window
 bindd = SUPER ALT SHIFT, F, File manager (cwd), exec, uwsm-app -- nautilus --new-window "$(omarchy-cmd-terminal-cwd)"
 bindd = SUPER SHIFT, B, Browser, exec, omarchy-launch-browser

config/hypr/input.conf

@@ -18,7 +18,7 @@ input {
 
   # Increase sensitivity for mouse/trackpad (default: 0)
   # sensitivity = 0.35
-  
+
   # Turn off mouse acceleration (default: false)
   # force_no_accel = true
 
@@ -47,3 +47,7 @@ windowrule = match:class com.mitchellh.ghostty, scroll_touchpad 0.2
 # Enable touchpad gestures for changing workspaces
 # See https://wiki.hyprland.org/Configuring/Gestures/
 # gesture = 3, horizontal, workspace
+
+# Enable touchpad gestures for moving focus (helpful on scrolling layout)
+# gesture = 3, left,  dispatcher, movefocus, l
+# gesture = 3, right, dispatcher, movefocus, r

config/hypr/looknfeel.conf

@@ -7,8 +7,8 @@ general {
     # gaps_out = 0
     # border_size = 0
 
-    # Use master layout instead of dwindle
-    # layout = master
+    # Change to niri-like side-scrolling layout
+    # layout = scrolling
 }
 
 # https://wiki.hyprland.org/Configuring/Variables/#decoration
@@ -27,8 +27,8 @@ animations {
     # enabled = no
 }
 
-# https://wiki.hypr.land/Configuring/Dwindle-Layout/
-dwindle {
+# https://wiki.hypr.land/Configuring/Variables/#layout
+layout {
     # Avoid overly wide single-window layouts on wide screens
     # single_window_aspect_ratio = 1 1
 }

config/hypr/monitors.conf

@@ -4,7 +4,7 @@
 
 # Optimized for retina-class 2x displays, like 13" 2.8K, 27" 5K, 32" 6K.
 env = GDK_SCALE,2
-monitor=,preferred,auto,auto
+monitor=,preferred,auto,auto,vrr,1
 
 # Good compromise for 27" or 32" 4K monitors (but fractional!)
 # env = GDK_SCALE,1.75

config/hyprland-preview-share-picker/config.yaml

@@ -3,7 +3,7 @@
 # relative paths are resolved relative to the location of the config file
 stylesheets: ["../omarchy/current/theme/hyprland-preview-share-picker.css"]
 # default page selected when the picker is opened
-default_page: windows
+default_page: outputs
 
 window:
   # height of the application window

config/omarchy/hooks/battery-low.sample

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# This hook is called with the current battery percentage when the low battery
+# notification is sent. To put it into use, remove .sample from the name.
+
+SOUND_FILE="/usr/share/sounds/freedesktop/stereo/dialog-warning.oga"
+
+if omarchy-cmd-present mpv && [[ -f $SOUND_FILE ]]; then
+  mpv --no-video "$SOUND_FILE" >/dev/null 2>&1
+fi

config/omarchy/hooks/font-set.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show the name of the theme that was just set.
-# notify-send "New font" "Your new font is $1"
+# notify-send -u low "New font" "Your new font is $1"

config/omarchy/hooks/post-update.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show notification after the system has been updated.
-# notify-send "Update Performed" "Your system is now up to date"
+# notify-send -u low "Update Performed" "Your system is now up to date"

config/omarchy/hooks/theme-set.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show the name of the theme that was just set.
-# notify-send "New theme" "Your new theme is $1"
+# notify-send -u low "New theme" "Your new theme is $1"

config/tmux/tmux.conf

@@ -4,7 +4,7 @@ set -g prefix2 C-b
 bind C-Space send-prefix
 
 # Reload config
-bind q source-file ~/.config/tmux/tmux.conf
+bind q source-file ~/.config/tmux/tmux.conf \; display "Configuration reloaded"
 
 # Vi mode for copy
 setw -g mode-keys vi
@@ -41,6 +41,11 @@ bind -n M-7 select-window -t 7
 bind -n M-8 select-window -t 8
 bind -n M-9 select-window -t 9
 
+bind -n M-Left select-window -t -1
+bind -n M-Right select-window -t +1
+bind -n M-S-Left swap-window -t -1 \; select-window -t -1
+bind -n M-S-Right swap-window -t +1 \; select-window -t +1
+
 # Session controls
 bind R command-prompt -I "#S" "rename-session -- '%%'"
 bind C new-session -c "#{pane_current_path}"
@@ -48,6 +53,9 @@ bind K kill-session
 bind P switch-client -p
 bind N switch-client -n
 
+bind -n M-Up switch-client -p
+bind -n M-Down switch-client -n
+
 # General
 set -g default-terminal "tmux-256color"
 set -ag terminal-overrides ",*:RGB"
@@ -69,11 +77,13 @@ set -g status-interval 5
 set -g status-left-length 30
 set -g status-right-length 50
 set -g window-status-separator ""
+set -gw automatic-rename on
+set -gw automatic-rename-format '#{b:pane_current_path}'
 
 # Theme
 set -g status-style "bg=default,fg=default"
 set -g status-left "#[fg=black,bg=blue,bold] #S #[bg=default] "
-set -g status-right "#[fg=blue]#{?client_prefix,PREFIX ,}#[fg=brightblack]#h "
+set -g status-right "#[fg=blue]#{?pane_in_mode,COPY ,}#{?client_prefix,PREFIX ,}#{?window_zoomed_flag,ZOOM ,}#[fg=brightblack]#h "
 set -g window-status-format "#[fg=brightblack] #I:#W "
 set -g window-status-current-format "#[fg=blue,bold] #I:#W "
 set -g pane-border-style "fg=brightblack"

config/uwsm/env

@@ -2,10 +2,10 @@
 
 # Ensure Omarchy bins are in the path
 export OMARCHY_PATH=$HOME/.local/share/omarchy
-export PATH=$OMARCHY_PATH/bin:$PATH
+export PATH=$OMARCHY_PATH/bin:$PATH:$HOME/.local/bin
 
 # Set default terminal and editor
 source ~/.config/uwsm/default
 
 # Activate mise if present on the system
-omarchy-cmd-present mise && eval "$(mise activate bash)"
+omarchy-cmd-present mise && eval "$(mise activate bash --shims)"

config/waybar/config.jsonc

@@ -72,8 +72,8 @@
     "format-wifi": "{icon}",
     "format-ethernet": "󰀂",
     "format-disconnected": "󰤮",
-    "tooltip-format-wifi": "{essid} ({frequency} GHz)\n⇣{bandwidthDownBytes}  ⇡{bandwidthUpBytes}",
-    "tooltip-format-ethernet": "⇣{bandwidthDownBytes}  ⇡{bandwidthUpBytes}",
+    "tooltip-format-wifi": "{essid} ({frequency} GHz)",
+    "tooltip-format-ethernet": "Connected",
     "tooltip-format-disconnected": "Disconnected",
     "interval": 3,
     "spacing": 1,

default/bash/aliases

@@ -6,18 +6,29 @@ if command -v eza &> /dev/null; then
   alias lta='lt -a'
 fi
 
-alias ff="fzf --preview 'bat --style=numbers --color=always {}'"
+if [[ "$TERM" == "xterm-kitty" ]]; then
+  alias ff="fzf --preview 'case \$(file --mime-type -b {}) in image/*) kitty icat --clear --transfer-mode=memory --stdin=no --place=\${FZF_PREVIEW_COLUMNS}x\${FZF_PREVIEW_LINES}@0x0 {} ;; *) bat --style=numbers --color=always {} ;; esac'"
+else
+  alias ff="fzf --preview 'bat --style=numbers --color=always {}'"
+fi
 alias eff='$EDITOR "$(ff)"'
+sff() { if [ $# -eq 0 ]; then echo "Usage: sff <destination> (e.g. sff host:/tmp/)"; return 1; fi; local file; file=$(find . -type f -printf '%T@\t%p\n' | sort -rn | cut -f2- | ff) && [ -n "$file" ] && scp "$file" "$1"; }
 
 if command -v zoxide &> /dev/null; then
   alias cd="zd"
   zd() {
-    if [ $# -eq 0 ]; then
-      builtin cd ~ && return
-    elif [ -d "$1" ]; then
-      builtin cd "$1"
+    if (( $# == 0 )); then
+      builtin cd ~ || return
+    elif [[ -d $1 ]]; then
+      builtin cd "$1" || return
     else
-      z "$@" && printf "\U000F17A9 " && pwd || echo "Error: Directory not found"
+      if ! z "$@"; then
+        echo "Error: Directory not found"
+        return 1
+      fi
+
+      printf "\U000F17A9 "
+      pwd
     fi
   }
 fi

default/bash/envs

@@ -1,3 +1,7 @@
 # Editor used by CLI
 export SUDO_EDITOR="$EDITOR"
 export BAT_THEME=ansi
+
+# Duplicated from .config/uwsm/env so SSH works too
+export OMARCHY_PATH=$HOME/.local/share/omarchy
+export PATH=$OMARCHY_PATH/bin:$PATH:$HOME/.local/bin

default/bash/fns/transcoding

@@ -13,23 +13,31 @@ img2jpg() {
   img="$1"
   shift
 
-  magick "$img" "$@" -quality 95 -strip "${img%.*}-converted.jpg"
+  magick "$img" "$@" -quality 85 -strip "${img%.*}-converted.jpg"
 }
 
-# Transcode any image to a small JPG (max 1080px wide) that's great for sharing online
+# Transcode any image to a small JPG (max 1080px wide)
 img2jpg-small() {
   img="$1"
   shift
 
-  magick "$img" "$@" -resize 1080x\> -quality 95 -strip "${img%.*}-small.jpg"
+  magick "$img" "$@" -resize 1080x\> -quality 85 -strip "${img%.*}-small.jpg"
 }
 
-# Transcode any image to a medium JPG (max 1800px wide) that's great for sharing online
+# Transcode any image to a 4K JPG (max 2160px wide)
 img2jpg-medium() {
   img="$1"
   shift
 
-  magick "$img" "$@" -resize 1800x\> -quality 95 -strip "${img%.*}-medium.jpg"
+  magick "$img" "$@" -resize 2160x\> -quality 85 -strip "${img%.*}-medium.jpg"
+}
+
+# Transcode any image to a 6K JPG (max 3160px wide)
+img2jpg-large() {
+  img="$1"
+  shift
+
+  magick "$img" "$@" -resize 3160x\> -quality 85 -strip "${img%.*}-large.jpg"
 }
 
 # Transcode any image to compressed-but-lossless PNG

default/bash/fns/worktrees

@@ -0,0 +1,36 @@
+# Create a new worktree and branch from within current git directory.
+ga() {
+  if [[ -z "$1" ]]; then
+    echo "Usage: ga [branch name]"
+    return 1
+  fi
+
+  local branch="$1"
+  local base="$(basename "$PWD")"
+  local wt_path="../${base}--${branch}"
+
+  git worktree add -b "$branch" "$wt_path"
+  mise trust "$wt_path"
+  cd "$wt_path"
+}
+
+# Remove worktree and branch from within active worktree directory.
+gd() {
+  if gum confirm "Remove worktree and branch?"; then
+    local cwd base branch root worktree
+
+    cwd="$(pwd)"
+    worktree="$(basename "$cwd")"
+
+    # split on first `--`
+    root="${worktree%%--*}"
+    branch="${worktree#*--}"
+
+    # Protect against accidentally nuking a non-worktree directory
+    if [[ "$root" != "$worktree" ]]; then
+      cd "../$root"
+      git worktree remove "$cwd" --force || return 1
+      git branch -D "$branch"
+    fi
+  fi
+}

default/bash/init

@@ -3,9 +3,6 @@ if command -v mise &> /dev/null; then
 fi
 
 if command -v starship &> /dev/null; then
-  # clear stale readline state before rendering prompt (prevents artifacts in prompt after abnormal exits like SIGQUIT)
-  __sanitize_prompt() { printf '\r\033[K'; }
-  PROMPT_COMMAND="__sanitize_prompt${PROMPT_COMMAND:+;$PROMPT_COMMAND}"
   eval "$(starship init bash)"
 fi
 
@@ -14,7 +11,7 @@ if command -v zoxide &> /dev/null; then
 fi
 
 if command -v try &> /dev/null; then
-  eval "$(SHELL=/bin/bash try init ~/Work/tries)"
+  eval "$(SHELL=/bin/bash command try init ~/Work/tries)"
 fi
 
 if command -v fzf &> /dev/null; then

default/bash/rc

@@ -1,6 +1,6 @@
+source ~/.local/share/omarchy/default/bash/envs
 source ~/.local/share/omarchy/default/bash/shell
 source ~/.local/share/omarchy/default/bash/aliases
 source ~/.local/share/omarchy/default/bash/functions
 source ~/.local/share/omarchy/default/bash/init
-source ~/.local/share/omarchy/default/bash/envs
 [[ $- == *i* ]] && bind -f ~/.local/share/omarchy/default/bash/inputrc

default/bashrc

@@ -9,4 +9,3 @@ source ~/.local/share/omarchy/default/bash/rc
 #
 # Make an alias for invoking commands you use constantly
 # alias p='python'
-# alias cx="claude --permission-mode=plan --allow-dangerously-skip-permissions"

default/elephant/omarchy_themes.lua

@@ -3,6 +3,7 @@
 --
 Name = "omarchythemes"
 NamePretty = "Omarchy Themes"
+HideFromProviderlist = true
 
 -- Check if file exists using Lua (no subprocess)
 local function file_exists(path)
@@ -93,4 +94,3 @@ function GetEntries()
 
   return entries
 end
-

default/hypr/apps.conf

@@ -3,13 +3,13 @@ source = ~/.local/share/omarchy/default/hypr/apps/1password.conf
 source = ~/.local/share/omarchy/default/hypr/apps/bitwarden.conf
 source = ~/.local/share/omarchy/default/hypr/apps/browser.conf
 source = ~/.local/share/omarchy/default/hypr/apps/hyprshot.conf
-source = ~/.local/share/omarchy/default/hypr/apps/jetbrains.conf
 source = ~/.local/share/omarchy/default/hypr/apps/localsend.conf
 source = ~/.local/share/omarchy/default/hypr/apps/pip.conf
 source = ~/.local/share/omarchy/default/hypr/apps/qemu.conf
 source = ~/.local/share/omarchy/default/hypr/apps/retroarch.conf
 source = ~/.local/share/omarchy/default/hypr/apps/steam.conf
 source = ~/.local/share/omarchy/default/hypr/apps/geforce.conf
+source = ~/.local/share/omarchy/default/hypr/apps/moonlight.conf
 source = ~/.local/share/omarchy/default/hypr/apps/system.conf
 source = ~/.local/share/omarchy/default/hypr/apps/telegram.conf
 source = ~/.local/share/omarchy/default/hypr/apps/terminals.conf

default/hypr/apps/jetbrains.conf

@@ -1,41 +0,0 @@
-# Fix splash screen showing in weird places and prevent annoying focus takeovers
-windowrule {
-    name = jetbrains-splash
-    match:class = ^(jetbrains-.*)$
-    match:title = ^(splash)$
-    match:float = 1
-    tag = +jetbrains-splash
-    center = on
-    no_focus = on
-    border_size = 0
-}
-
-# Center popups/find windows
-windowrule {
-    name = jetbrains-popup
-    match:class = ^(jetbrains-.*)
-    match:title = ^()$
-    match:float = 1
-    tag = +jetbrains
-    center = on
-    # Enabling this makes it possible to provide input in popup dialogs (search window, new file, etc.)
-    stay_focused = on
-    border_size = 0
-    min_size = (monitor_w*0.5) (monitor_h*0.5)
-  }
-
-# Disable window flicker when autocomplete or tooltips appear
-windowrule {
-    name = jetbrains-tooltip
-    match:class = ^(jetbrains-.*)$
-    match:title = ^(win.*)$
-    match:float = 1
-    no_initial_focus = on
-}
-
-# Disable mouse focus
-windowrule {
-    name = jetbrains-focus
-    no_follow_mouse = on
-    match:class = ^(jetbrains-.*)$
-}

default/hypr/apps/localsend.conf

@@ -1,3 +1,4 @@
 # Float LocalSend and fzf file picker
 windowrule = float on, match:class (Share|localsend)
 windowrule = center on, match:class (Share|localsend)
+windowrule = size 1100 700, match:class localsend

default/hypr/apps/moonlight.conf

@@ -0,0 +1,6 @@
+windowrule {
+  name = moonlight
+  match:class = com.moonlight_stream.Moonlight
+  fullscreen = 1
+  idle_inhibit = fullscreen
+}

default/hypr/apps/system.conf

@@ -10,6 +10,7 @@ windowrule = float on, match:class org.gnome.Calculator
 # Fullscreen screensaver
 windowrule = fullscreen on, match:class org.omarchy.screensaver
 windowrule = float on, match:class org.omarchy.screensaver
+windowrule = animation slide, match:class org.omarchy.screensaver
 
 # No transparency on media windows
 windowrule = tag -default-opacity, match:class ^(zoom|vlc|mpv|org.kde.kdenlive|com.obsproject.Studio|com.github.PintaProject.Pinta|imv|org.gnome.NautilusPreviewer)$

default/hypr/bindings/tiling-v2.conf

@@ -3,13 +3,14 @@ bindd = SUPER, W, Close window, killactive,
 bindd = CTRL ALT, DELETE, Close all windows, exec, omarchy-hyprland-window-close-all
 
 # Control tiling
-bindd = SUPER, J, Toggle window split, togglesplit, # dwindle
+bindd = SUPER, J, Toggle window split, layoutmsg, togglesplit
 bindd = SUPER, P, Pseudo window, pseudo, # dwindle
 bindd = SUPER, T, Toggle window floating/tiling, togglefloating,
 bindd = SUPER, F, Full screen, fullscreen, 0
 bindd = SUPER CTRL, F, Tiled full screen, fullscreenstate, 0 2
 bindd = SUPER ALT, F, Full width, fullscreen, 1
 bindd = SUPER, O, Pop window out (float & pin), exec, omarchy-hyprland-window-pop
+bindd = SUPER, L, Toggle workspace layout, exec, omarchy-hyprland-workspace-layout-toggle
 
 # Move focus with SUPER + arrow keys
 bindd = SUPER, LEFT, Move window focus left, movefocus, l
@@ -122,3 +123,6 @@ bindd = SUPER ALT, code:11, Switch to group window 2, changegroupactive, 2
 bindd = SUPER ALT, code:12, Switch to group window 3, changegroupactive, 3
 bindd = SUPER ALT, code:13, Switch to group window 4, changegroupactive, 4
 bindd = SUPER ALT, code:14, Switch to group window 5, changegroupactive, 5
+
+# Cycle monitor scaling
+bindd = SUPER, Slash, Cycle monitor scaling, exec, omarchy-hyprland-monitor-scaling-cycle

default/hypr/bindings/utilities.conf

@@ -2,6 +2,7 @@
 bindd = SUPER, SPACE, Launch apps, exec, omarchy-launch-walker
 bindd = SUPER CTRL, E, Emoji picker, exec, omarchy-launch-walker -m symbols
 bindd = SUPER CTRL, C, Capture menu, exec, omarchy-menu capture
+bindd = SUPER CTRL, O, Toggle menu, exec, omarchy-menu toggle
 bindd = SUPER ALT, SPACE, Omarchy menu, exec, omarchy-menu
 bindd = SUPER, ESCAPE, System menu, exec, omarchy-menu system
 bindld = , XF86PowerOff, Power menu, exec, omarchy-menu system
@@ -10,10 +11,11 @@ bindd = , XF86Calculator, Calculator, exec, gnome-calculator
 
 # Aesthetics
 bindd = SUPER SHIFT, SPACE, Toggle top bar, exec, omarchy-toggle-waybar
-bindd = SUPER CTRL, SPACE, Next background in theme, exec, omarchy-menu background
+bindd = SUPER CTRL, SPACE, Theme background menu, exec, omarchy-menu background
 bindd = SUPER SHIFT CTRL, SPACE, Theme menu, exec, omarchy-menu theme
-bindd = SUPER, BACKSPACE, Toggle window transparency, exec, hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle
-bindd = SUPER SHIFT, BACKSPACE, Toggle workspace gaps, exec, omarchy-hyprland-workspace-toggle-gaps
+bindd = SUPER, BACKSPACE, Toggle window transparency, exec, omarchy-hyprland-active-window-transparency-toggle
+bindd = SUPER SHIFT, BACKSPACE, Toggle window gaps, exec, omarchy-hyprland-window-gaps-toggle
+bindd = SUPER CTRL, BACKSPACE, Toggle single-window square aspect, exec, omarchy-hyprland-window-single-square-aspect-toggle
 
 # Notifications
 bindd = SUPER, COMMA, Dismiss last notification, exec, makoctl dismiss
@@ -25,8 +27,6 @@ bindd = SUPER SHIFT ALT, COMMA, Restore last notification, exec, makoctl restore
 # Toggles
 bindd = SUPER CTRL, I, Toggle locking on idle, exec, omarchy-toggle-idle
 bindd = SUPER CTRL, N, Toggle nightlight, exec, omarchy-toggle-nightlight
-bindd = SUPER CTRL, Backspace, Toggle monitor scaling, exec, omarchy-hyprland-monitor-scaling-toggle
-bindd = SUPER CTRL ALT, Backspace, Toggle single-window square aspect, exec, omarchy-hyprland-window-single-square-aspect-toggle
 
 # Control Apple Display brightness
 bindd = CTRL, F1, Apple Display brightness down, exec, omarchy-brightness-display-apple -5000
@@ -42,8 +42,8 @@ bindd = SUPER, PRINT, Color picker, exec, pkill hyprpicker || hyprpicker -a
 bindd = SUPER CTRL, S, Share, exec, omarchy-menu share
 
 # Waybar-less information
-bindd = SUPER CTRL ALT, T, Show time, exec, notify-send "    $(date +"%A %H:%M  —  %d %B W%V %Y")"
-bindd = SUPER CTRL ALT, B, Show battery remaining, exec, notify-send "󰁹    Battery is at $(omarchy-battery-remaining)%"
+bindd = SUPER CTRL ALT, T, Show time, exec, notify-send -u low "    $(date +"%A %H:%M  ·  %d %B %Y  ·  Week %V")"
+bindd = SUPER CTRL ALT, B, Show battery remaining, exec, notify-send -u low "$(omarchy-battery-status)"
 
 # Control panels
 bindd = SUPER CTRL, A, Audio controls, exec, omarchy-launch-audio

default/hypr/looknfeel.conf

@@ -103,6 +103,7 @@ animations {
     animation = fadeLayersIn, 1, 1.79, almostLinear
     animation = fadeLayersOut, 1, 1.39, almostLinear
     animation = workspaces, 0, 0, ease
+    animation = specialWorkspace, 1, 4, easeOutQuint, slidevert
 }
 
 # See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more

default/limine/default.conf

@@ -2,7 +2,7 @@ TARGET_OS_NAME="Omarchy"
 
 ESP_PATH="/boot"
 
-KERNEL_CMDLINE[default]="@@CMDLINE@@"
+KERNEL_CMDLINE[default]+="@@CMDLINE@@"
 KERNEL_CMDLINE[default]+=" quiet splash"
 
 ENABLE_UKI=yes

default/makima/AT Translated Set 2 keyboard.toml

@@ -0,0 +1,7 @@
+# Run omarchy-restart-makima after any changes
+
+[remap]
+KEY_LEFTMETA-KEY_LEFTSHIFT-KEY_F23 = ["KEY_LEFTMETA", "KEY_LEFTALT", "KEY_SPACE"]
+
+[settings]
+GRAB_DEVICE = "true"

default/nautilus-python/extensions/localsend.py

@@ -0,0 +1,84 @@
+import os
+import shutil
+
+from gi import require_version
+
+require_version("Nautilus", "4.1")
+
+from gi.repository import GObject, Gio, Nautilus
+
+
+class SendViaLocalSendAction(GObject.GObject, Nautilus.MenuProvider):
+    def _launch_localsend(self, paths):
+        command = self._resolve_command()
+        if not command:
+            return
+
+        if command[-1] == "@@":
+            command = command + paths + ["@@"]
+        else:
+            command = command + paths
+
+        Gio.Subprocess.new(command, Gio.SubprocessFlags.NONE)
+
+    def _resolve_command(self):
+        localsend = shutil.which("localsend")
+        if localsend:
+            return [localsend, "--headless", "send"]
+
+        flatpak = shutil.which("flatpak")
+        if flatpak and self._has_flatpak_app(flatpak, "org.localsend.localsend_app"):
+            return [
+                flatpak,
+                "run",
+                "--file-forwarding",
+                "org.localsend.localsend_app",
+                "@@",
+            ]
+
+        return None
+
+    def _has_flatpak_app(self, flatpak, app_id):
+        process = Gio.Subprocess.new(
+            [flatpak, "info", app_id],
+            Gio.SubprocessFlags.STDOUT_SILENCE | Gio.SubprocessFlags.STDERR_SILENCE,
+        )
+        return process.wait_check()
+
+    def _selected_paths(self, files):
+        paths = []
+
+        for file in files:
+            location = file.get_location()
+            if not location:
+                continue
+
+            path = location.get_path()
+            if path and path not in paths:
+                paths.append(path)
+
+        return paths
+
+    def _make_item(self, paths):
+        label = (
+            "Send via LocalSend" if len(paths) == 1 else "Send selected via LocalSend"
+        )
+        item = Nautilus.MenuItem(
+            name="LocalSendNautilus::send_via_localsend",
+            label=label,
+            icon="localsend",
+        )
+        item.connect("activate", self._on_activate, paths)
+        return item
+
+    def _on_activate(self, _menu, paths):
+        self._launch_localsend(paths)
+
+    def get_file_items(self, *args):
+        files = args[0] if len(args) == 1 else args[1]
+        paths = self._selected_paths(files)
+
+        if not paths or not self._resolve_command():
+            return []
+
+        return [self._make_item(paths)]

default/sddm/omarchy/Main.qml

@@ -60,6 +60,7 @@ Rectangle {
                 color: "#000000"
                 border.color: "#ffffff"
                 border.width: 1
+                clip: true
 
                 TextInput {
                     id: password

default/systemd/system-sleep/unmount-fuse

@@ -0,0 +1,32 @@
+#!/bin/bash
+
+# Lazy-unmount gvfsd-fuse filesystems before suspend/hibernate to prevent the
+# kernel's process freeze from timing out. FUSE daemons (like gvfsd-fuse from
+# Nautilus) can block in uninterruptible sleep during freeze, causing suspend
+# to silently fail. After wake, restart gvfs so the FUSE mount is restored.
+
+if [[ $1 == "pre" ]]; then
+  while IFS=' ' read -r _ mountpoint fstype _; do
+    if [[ $fstype == fuse.gvfsd-fuse ]]; then
+      mountpoint=$(printf '%b' "$mountpoint")
+      fusermount3 -uz "$mountpoint" 2>/dev/null || fusermount -uz "$mountpoint" 2>/dev/null || true
+    fi
+  done < /proc/mounts
+fi
+
+if [[ $1 == "post" ]]; then
+  # Run in background — user.slice is still frozen at this point, so a
+  # synchronous restart would block the thaw for up to 90 seconds.
+  (
+    sleep 5
+    for uid_dir in /run/user/*; do
+      uid=$(basename "$uid_dir")
+      if [[ -S $uid_dir/bus ]]; then
+        sudo -u "#$uid" env \
+          DBUS_SESSION_BUS_ADDRESS="unix:path=$uid_dir/bus" \
+          XDG_RUNTIME_DIR="$uid_dir" \
+          systemctl --user restart gvfs-daemon.service 2>/dev/null || true
+      fi
+    done
+  ) &
+fi

install/config/all.sh

@@ -14,15 +14,20 @@ run_logged $OMARCHY_INSTALL/config/mise-work.sh
 run_logged $OMARCHY_INSTALL/config/fix-powerprofilesctl-shebang.sh
 run_logged $OMARCHY_INSTALL/config/docker.sh
 run_logged $OMARCHY_INSTALL/config/mimetypes.sh
+run_logged $OMARCHY_INSTALL/config/nautilus-python.sh
+run_logged $OMARCHY_INSTALL/config/remove-fcitx5-autostart.sh
 run_logged $OMARCHY_INSTALL/config/localdb.sh
 run_logged $OMARCHY_INSTALL/config/walker-elephant.sh
 run_logged $OMARCHY_INSTALL/config/fast-shutdown.sh
+run_logged $OMARCHY_INSTALL/config/unmount-fuse.sh
 run_logged $OMARCHY_INSTALL/config/sudoless-asdcontrol.sh
 run_logged $OMARCHY_INSTALL/config/input-group.sh
 run_logged $OMARCHY_INSTALL/config/omarchy-ai-skill.sh
 run_logged $OMARCHY_INSTALL/config/kernel-modules-hook.sh
 run_logged $OMARCHY_INSTALL/config/powerprofilesctl-rules.sh
 run_logged $OMARCHY_INSTALL/config/wifi-powersave-rules.sh
+run_logged $OMARCHY_INSTALL/config/plocate-ac-only.sh
+
 run_logged $OMARCHY_INSTALL/config/hardware/network.sh
 run_logged $OMARCHY_INSTALL/config/hardware/set-wireless-regdom.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-fkeys.sh
@@ -32,14 +37,29 @@ run_logged $OMARCHY_INSTALL/config/hardware/usb-autosuspend.sh
 run_logged $OMARCHY_INSTALL/config/hardware/ignore-power-button.sh
 run_logged $OMARCHY_INSTALL/config/hardware/nvidia.sh
 run_logged $OMARCHY_INSTALL/config/hardware/vulkan.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-f13-amd-audio-input.sh
+
+run_logged $OMARCHY_INSTALL/config/hardware/intel/video-acceleration.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/lpmd.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/thermald.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/ipu7-camera.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/ptl-kernel.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/fix-wifi7-eht.sh
+
+run_logged $OMARCHY_INSTALL/config/hardware/dell/fix-xps-haptic-touchpad.sh
+run_logged $OMARCHY_INSTALL/config/hardware/dell/fix-xps-ptl-display.sh
+
+run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-audio-mixer.sh
+run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-mic.sh
+
+run_logged $OMARCHY_INSTALL/config/hardware/framework/fix-f13-amd-audio-input.sh
+run_logged $OMARCHY_INSTALL/config/hardware/framework/qmk-hid.sh
+
+run_logged $OMARCHY_INSTALL/config/hardware/apple/fix-spi-keyboard.sh
+run_logged $OMARCHY_INSTALL/config/hardware/apple/fix-suspend-nvme.sh
+run_logged $OMARCHY_INSTALL/config/hardware/apple/fix-t2.sh
+
 run_logged $OMARCHY_INSTALL/config/hardware/fix-bcm43xx.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-spi-keyboard.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-suspend-nvme.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-t2.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-surface-keyboard.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-asus-rog-audio-mixer.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-asus-rog-mic.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-yt6801-ethernet-adapter.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-synaptic-touchpad.sh
-run_logged $OMARCHY_INSTALL/config/hardware/framework16-qmk-hid.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-tuxedo-backlight.sh

install/config/hardware/apple/fix-t2.sh

@@ -19,6 +19,7 @@ if lspci -nn | grep -q "106b:180[12]"; then
   sudo systemctl enable tiny-dfr.service
 
   echo "apple-bce" | sudo tee /etc/modules-load.d/t2.conf >/dev/null
+  echo "hci_bcm4377" | sudo tee -a /etc/modules-load.d/t2.conf >/dev/null
 
   echo "MODULES+=(apple-bce usbhid hid_apple hid_generic xhci_pci xhci_hcd)" | sudo tee /etc/mkinitcpio.conf.d/apple-t2.conf >/dev/null
 
@@ -30,6 +31,14 @@ EOF
   sudo mkdir -p /etc/limine-entry-tool.d
   cat <<EOF | sudo tee /etc/limine-entry-tool.d/t2-mac.conf >/dev/null
 # Generated by Omarchy installer for T2 Mac support
-KERNEL_CMDLINE[default]+="intel_iommu=on iommu=pt pcie_ports=compat"
+KERNEL_CMDLINE[default]+=" intel_iommu=on iommu=pt pcie_ports=compat"
+EOF
+
+  cat <<EOF | sudo tee /etc/t2fand.conf >/dev/null
+[Fan1]
+low_temp=55
+high_temp=75
+speed_curve=linear
+always_full_speed=false
 EOF
 fi

install/config/hardware/asus/fix-mic.sh

@@ -7,7 +7,7 @@ if omarchy-hw-asus-rog; then
     if grep -q "ALC285" "$card" 2>/dev/null; then
       cardnum=$(echo "$card" | grep -oP 'card\K\d+')
       amixer -c "$cardnum" set 'Internal Mic Boost' 0 >/dev/null 2>&1 || true
-      amixer -c "$cardnum" set 'Capture' 70% >/dev/null 2>&1 || true
+      amixer -c "$cardnum" set 'Capture' 70% unmute >/dev/null 2>&1 || true
       sudo alsactl store "$cardnum" 2>/dev/null || true
       break
     fi

install/config/hardware/dell/fix-xps-haptic-touchpad.sh

@@ -0,0 +1,36 @@
+# Fix Dell XPS haptic touchpad.
+# The Synaptics haptic touchpad (06CB:D01A) uses the HID Manual Trigger
+# protocol, but the kernel's HID haptic subsystem only supports Auto Trigger.
+# This sets up a lightweight daemon that monitors touchpad button events and
+# sends haptic pulses via HID feature reports on the hidraw device.
+# Also disables I2C runtime PM to prevent the haptic engine losing state
+# across suspend/resume.
+
+if omarchy-hw-match "XPS" \
+  && ls /sys/bus/i2c/devices/i2c-VEN_06CB:00 2>/dev/null; then
+
+  # Keep I2C controller power on to prevent haptic engine losing state
+  sudo tee /etc/udev/rules.d/99-dell-xps-haptic-touchpad.rules << 'EOF'
+ACTION=="add", SUBSYSTEM=="pci", KERNEL=="0000:00:19.0", ATTR{power/control}="on"
+ACTION=="add", SUBSYSTEM=="platform", KERNEL=="i2c_designware.0", ATTR{power/control}="on"
+EOF
+  sudo udevadm control --reload-rules
+
+  # Haptic feedback daemon as a systemd service
+  sudo tee /etc/systemd/system/dell-xps-haptic-touchpad.service << SVC
+[Unit]
+Description=Dell XPS haptic touchpad feedback
+After=systemd-udev-settle.service
+
+[Service]
+Type=simple
+ExecStart=$OMARCHY_PATH/bin/omarchy-haptic-touchpad
+Restart=on-failure
+RestartSec=2
+
+[Install]
+WantedBy=multi-user.target
+SVC
+  sudo systemctl daemon-reload
+  sudo systemctl enable dell-xps-haptic-touchpad.service
+fi

install/config/hardware/dell/fix-xps-ptl-display.sh

@@ -0,0 +1,21 @@
+# Fix display issues on Dell XPS 2026+ with LG OLED panel and Intel Panther Lake (Xe3) GPU.
+# Power-saving features cause the screen to run at 10hz.
+if omarchy-hw-match "XPS" \
+  && omarchy-hw-intel-ptl \
+  && test "$(od -An -tx1 -j8 -N2 /sys/class/drm/card*-eDP-*/edid 2>/dev/null | tr -d ' \n')" = "30e4"; then
+
+  echo "Detected Dell XPS with LG OLED panel on Panther Lake, applying display power-saving fix..."
+
+  CMDLINE='KERNEL_CMDLINE[default]+=" xe.enable_panel_replay=0"'
+
+  sudo mkdir -p /etc/limine-entry-tool.d
+  cat <<EOF | sudo tee /etc/limine-entry-tool.d/dell-xps-ptl-display.conf >/dev/null
+# Fix Dell XPS OLED display issues by disabling Xe PSR2 power-saving feature
+$CMDLINE
+EOF
+
+  # Also append to /etc/default/limine if it exists, since it overrides drop-in configs
+  if [ -f /etc/default/limine ] && ! grep -q 'xe.enable_panel_replay' /etc/default/limine; then
+    echo "$CMDLINE" | sudo tee -a /etc/default/limine >/dev/null
+  fi
+fi

install/config/hardware/fix-tuxedo-backlight.sh

@@ -0,0 +1,15 @@
+# Install Tuxedo drivers for keyboard backlighting on Tuxedo laptops and
+# compatible devices like the Slimbook Executive (Clevo/Tuxedo chassis).
+if cat /sys/class/dmi/id/sys_vendor 2>/dev/null | grep -qi "TUXEDO\|Slimbook"; then
+  omarchy-pkg-add linux-headers tuxedo-drivers-nocompatcheck-dkms
+
+  # Blacklist the legacy clevo_xsm_wmi module which conflicts with the tuxedo-drivers
+  # clevo_wmi module. When clevo_xsm_wmi loads first, it grabs the Clevo WMI GUIDs,
+  # preventing tuxedo-drivers from initializing the keyboard backlight properly.
+  echo "blacklist clevo_xsm_wmi" | sudo tee /etc/modprobe.d/blacklist-clevo-xsm-wmi.conf > /dev/null
+
+  # Remove any orphaned clevo_xsm_wmi module files not managed by a package
+  for f in /lib/modules/*/extra/clevo-xsm-wmi.ko; do
+    [ -f "$f" ] && sudo rm "$f"
+  done
+fi

install/config/hardware/intel/fix-wifi7-eht.sh

@@ -0,0 +1,15 @@
+# Temporary fix for Dell XPS 14/16 on Panther Lake
+# Disable WiFi 7 (EHT/802.11be) on Intel BE200/BE211 cards
+# The iwlwifi driver has a broken EHT RX data path — APs drop to MCS 0 NSS 1
+# when EHT is negotiated, making WiFi unusable. Disabling EHT falls
+# back to WiFi 6 (HE/802.11ax) which works at full speed.
+# This should be removed when Intel fixes the firmware/driver.
+
+if lspci -nn | grep -qE '\[8086:(e440|272b)\]'; then
+  sudo tee /etc/modprobe.d/iwlwifi-disable-eht.conf <<'EOF'
+# Temporary fix Dell XPS 14/16 on Panther lake
+# Disable WiFi 7 (EHT) on Intel BE200/BE211 — broken RX rate adaptation
+# Remove this file when fixes land in the iwlwifi EHT data path
+options iwlwifi disable_11be=Y
+EOF
+fi

install/config/hardware/intel/ipu7-camera.sh

@@ -0,0 +1,5 @@
+# Install MIPI camera support for Intel IPU7 hardware
+
+if grep -q "OVTI08F4" /sys/bus/acpi/devices/*/hid 2>/dev/null; then
+  omarchy-pkg-add intel-ipu7-camera
+fi