AI prompt experiments

AGENTS.md

@@ -92,10 +92,6 @@ Exceptions are allowed for bootstrap, preflight, migration, and package-helper s
 - `default/themed/*.tpl` - templates with `{{ variable }}` placeholders for theme colors
 - `themes/*/colors.toml` - theme color definitions (accent, background, foreground, color0-15)
 
-# Visual Changes
-
-When making visual changes, such as Waybar styles or desktop appearance, always take and analyze a screenshot after applying the change to verify the result. Use `omarchy capture screenshot fullscreen save` for fullscreen screenshots.
-
 # Refresh Pattern
 
 To copy a default config to user config with automatic backup:

bin/omarchy

@@ -29,10 +29,10 @@ declare -A GROUP_DESCRIPTIONS
 GROUP_DESCRIPTIONS[ac]="AC power detection"
 GROUP_DESCRIPTIONS[battery]="Battery status helpers"
 GROUP_DESCRIPTIONS[branch]="Omarchy git branch management"
-GROUP_DESCRIPTIONS[branding]="About and screensaver branding"
 GROUP_DESCRIPTIONS[brightness]="Display and keyboard brightness"
 GROUP_DESCRIPTIONS[capture]="Screenshots and screen recording"
 GROUP_DESCRIPTIONS[channel]="Omarchy release channel management"
+GROUP_DESCRIPTIONS[ai]="AI prompt helpers"
 GROUP_DESCRIPTIONS[cmd]="Command and shortcut helpers"
 GROUP_DESCRIPTIONS[config]="System configuration helpers"
 GROUP_DESCRIPTIONS[debug]="Diagnostics and support logs"

bin/omarchy-ai-prompt

@@ -0,0 +1,70 @@
+#!/bin/bash
+
+# omarchy:summary=Ask Pi a question and show the answer as a notification
+# omarchy:group=ai
+# omarchy:name=prompt
+# omarchy:args=[--speak] [prompt]
+# omarchy:examples=omarchy ai prompt|omarchy-ai-prompt --speak "Summarize this"
+
+set -euo pipefail
+
+state_home=${XDG_STATE_HOME:-$HOME/.local/state}/omarchy
+state_dir="$state_home/indicators"
+session_file="$state_home/agent/prompt.jsonl"
+state_file="$state_dir/ai"
+mkdir -p "$state_dir" "$(dirname "$session_file")"
+
+markdown_to_pango() {
+  sed -E \
+    -e 's/&/\&/g' \
+    -e 's/</\&lt;/g' \
+    -e 's/>/\&gt;/g' \
+    -e 's/`([^`]+)`/<tt>\1<\/tt>/g' \
+    -e 's/\*\*([^*]+)\*\*/<b>\1<\/b>/g' \
+    -e 's/__([^_]+)__/<b>\1<\/b>/g' \
+    -e 's/\*([^*]+)\*/<i>\1<\/i>/g' \
+    -e 's/_([^_]+)_/<i>\1<\/i>/g' \
+    -e 's/~~([^~]+)~~/<s>\1<\/s>/g'
+}
+
+speak=false
+if (($# > 0)) && [[ ${1:-} == "--speak" ]]; then
+  speak=true
+  shift
+fi
+
+if (($# > 0)); then
+  prompt="$*"
+else
+  prompt=$(omarchy-menu-input "Ask AI" --width 800 || true)
+fi
+
+prompt=$(sed 's/^[[:space:]]*//; s/[[:space:]]*$//' <<<"$prompt")
+[[ -n $prompt ]] || exit 0
+
+cleanup() {
+  rm -f "$state_file"
+  pkill -RTMIN+11 waybar 2>/dev/null || true
+}
+trap cleanup EXIT
+
+echo "thinking" >"$state_file"
+pkill -RTMIN+11 waybar 2>/dev/null || true
+
+if answer=$(pi -p \
+  --session "$session_file" \
+  --model gemini-2.5-flash-lite \
+  --skill "$HOME/.pi/agent/skills/omarchy" \
+  --skill "$HOME/.pi/agent/git/github.com/badlogic/pi-skills/brave-search" \
+  --append-system-prompt "For Omarchy desktop/system/config questions, load and follow the omarchy skill before answering. For current facts, historical facts, documentation, or questions that need web context, use the brave-search skill when BRAVE_API_KEY is available; otherwise answer from general knowledge and say when uncertain." \
+  "$prompt" 2>&1); then
+  if [[ $speak == true ]]; then
+    omarchy-ai-speak "$answer"
+  else
+    formatted_answer=$(markdown_to_pango <<<"$answer")
+    omarchy-notification-send "󱚣" "Oma" "$formatted_answer" -t 10000
+  fi
+else
+  omarchy-notification-send "󱚡" "Oma failed" "$answer" -u critical -t 10000
+  exit 1
+fi

bin/omarchy-ai-prompt-transcribe

@@ -0,0 +1,96 @@
+#!/bin/bash
+
+# omarchy:summary=Record speech, transcribe it with Voxtype, and ask Pi
+# omarchy:group=ai
+# omarchy:name=prompt-transcribe
+# omarchy:hidden=true
+
+set -euo pipefail
+
+runtime_dir=${XDG_RUNTIME_DIR:-/tmp}/omarchy
+state_dir=${XDG_STATE_HOME:-$HOME/.local/state}/omarchy/indicators
+pid_file="$runtime_dir/prompt-transcribe.pid"
+wav_file="$runtime_dir/prompt-transcribe.wav"
+state_file="$state_dir/ai"
+log_file="$runtime_dir/prompt-transcribe.log"
+mkdir -p "$runtime_dir" "$state_dir"
+
+log() {
+  printf '[%s] %s\n' "$(date '+%F %T')" "$*" >>"$log_file"
+}
+
+show_indicator() {
+  echo "listening" >"$state_file"
+  pkill -RTMIN+11 waybar 2>/dev/null || true
+}
+
+hide_indicator() {
+  rm -f "$state_file"
+  pkill -RTMIN+11 waybar 2>/dev/null || true
+}
+
+log "started: ${1:-toggle}"
+
+case "${1:-toggle}" in
+  start)
+    if [[ -s $pid_file ]] && kill -0 "$(<"$pid_file")" 2>/dev/null; then
+      exit 0
+    fi
+
+    show_indicator
+    rm -f "$wav_file"
+    pw-record --target @DEFAULT_SOURCE@ --format s16 --rate 16000 --channels 1 "$wav_file" >>"$log_file" 2>&1 &
+    echo $! >"$pid_file"
+    log "recording started with pid $(<"$pid_file")"
+    ;;
+  stop)
+    if [[ -s $pid_file ]]; then
+      pid=$(<"$pid_file")
+      log "stopping recorder pid $pid"
+      kill "$pid" 2>/dev/null || true
+
+      for _ in {1..20}; do
+        kill -0 "$pid" 2>/dev/null || break
+        sleep 0.05
+      done
+
+      rm -f "$pid_file"
+    else
+      log "no pid file found"
+    fi
+
+    if [[ ! -s $wav_file ]]; then
+      log "no recording found, exiting"
+      hide_indicator
+      exit 0
+    fi
+
+    log "transcribing $(stat -c%s "$wav_file") bytes"
+    if transcript=$(voxtype transcribe "$wav_file" 2>>"$log_file"); then
+      log "transcription length: ${#transcript}"
+    else
+      status=$?
+      rm -f "$wav_file"
+      log "transcription failed with status $status"
+      hide_indicator
+      omarchy-notification-send "󱚣" "AI transcription failed" "Voxtype could not transcribe the prompt." -u critical
+      exit 1
+    fi
+
+    rm -f "$wav_file"
+    transcript=$(sed 's/^[[:space:]]*//; s/[[:space:]]*$//' <<<"$transcript")
+    if [[ -z $transcript ]]; then
+      log "empty transcription, exiting"
+      hide_indicator
+      exit 0
+    fi
+
+    log "sending transcript to omarchy-ai-prompt"
+    omarchy-ai-prompt --speak "$transcript"
+    log "omarchy-ai-prompt finished"
+    ;;
+  *)
+    echo "Usage: omarchy-ai-prompt-transcribe start|stop"
+    exit 1
+    ;;
+esac

bin/omarchy-ai-speak

@@ -0,0 +1,36 @@
+#!/bin/bash
+
+# omarchy:summary=Speak text using Piper TTS
+# omarchy:group=ai
+# omarchy:name=speak
+# omarchy:args=[text]
+# omarchy:examples=omarchy ai speak "Hello"
+
+set -euo pipefail
+
+voice_dir=${XDG_DATA_HOME:-$HOME/.local/share}/omarchy/piper
+model="$voice_dir/en_US-amy-medium.onnx"
+config="$voice_dir/en_US-amy-medium.onnx.json"
+output=${XDG_RUNTIME_DIR:-/tmp}/omarchy-ai-speak.wav
+
+mkdir -p "$voice_dir" "$(dirname "$output")"
+
+if (($# > 0)); then
+  text="$*"
+else
+  text=$(cat)
+fi
+
+text=$(sed 's/^[[:space:]]*//; s/[[:space:]]*$//' <<<"$text")
+[[ -n $text ]] || exit 0
+
+if [[ ! -f $model ]]; then
+  curl -L --fail -o "$model" "https://huggingface.co/rhasspy/piper-voices/resolve/main/en/en_US/amy/medium/en_US-amy-medium.onnx"
+fi
+
+if [[ ! -f $config ]]; then
+  curl -L --fail -o "$config" "https://huggingface.co/rhasspy/piper-voices/resolve/main/en/en_US/amy/medium/en_US-amy-medium.onnx.json"
+fi
+
+uvx --from piper-tts piper --model "$model" --config "$config" --output-file "$output" <<<"$text" >/dev/null
+pw-play "$output"

bin/omarchy-branding-about

@@ -1,28 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Edit, set, or reset About branding
-# omarchy:group=branding
-# omarchy:name=about
-# omarchy:args=<image|text|reset>
-# omarchy:examples=omarchy branding about image | omarchy branding about text | omarchy branding about reset
-
-set -euo pipefail
-
-case "${1:-}" in
-image)
-  image=$(omarchy-menu-file "Logo image" "$HOME" "svg png")
-  if [[ -n $image ]] && omarchy-transcode-ascii "$image" ~/.config/omarchy/branding/about.txt --width 54 --height 26 --mode block; then
-    omarchy-launch-about >/dev/null 2>&1
-  fi
-  ;;
-text)
-  omarchy-launch-editor ~/.config/omarchy/branding/about.txt >/dev/null 2>&1 && omarchy-launch-about >/dev/null 2>&1
-  ;;
-reset)
-  cp "$OMARCHY_PATH/icon.txt" ~/.config/omarchy/branding/about.txt && omarchy-launch-about >/dev/null 2>&1
-  ;;
-*)
-  echo "Usage: omarchy-branding-about <image|text|reset>" >&2
-  exit 1
-  ;;
-esac

bin/omarchy-branding-screensaver

@@ -1,28 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Edit, set, or reset screensaver branding
-# omarchy:group=branding
-# omarchy:name=screensaver
-# omarchy:args=<image|text|reset>
-# omarchy:examples=omarchy branding screensaver image | omarchy branding screensaver text | omarchy branding screensaver reset
-
-set -euo pipefail
-
-case "${1:-}" in
-image)
-  image=$(omarchy-menu-file "Logo image" "$HOME" "svg png")
-  if [[ -n $image ]] && omarchy-transcode-ascii "$image" ~/.config/omarchy/branding/screensaver.txt; then
-    omarchy-launch-screensaver force >/dev/null 2>&1
-  fi
-  ;;
-text)
-  omarchy-launch-editor ~/.config/omarchy/branding/screensaver.txt >/dev/null 2>&1 && omarchy-launch-screensaver force >/dev/null 2>&1
-  ;;
-reset)
-  cp "$OMARCHY_PATH/logo.txt" ~/.config/omarchy/branding/screensaver.txt && omarchy-launch-screensaver force >/dev/null 2>&1
-  ;;
-*)
-  echo "Usage: omarchy-branding-screensaver <image|text|reset>" >&2
-  exit 1
-  ;;
-esac

bin/omarchy-capture-screenrecording

@@ -233,7 +233,6 @@ stop_screenrecording() {
   else
     finalize_recording
     local filename=$(cat "$RECORDING_FILE" 2>/dev/null)
-    echo "$filename"
     local preview="${filename%.mp4}-preview.png"
 
     # Generate a preview thumbnail from the first frame

bin/omarchy-capture-screenshot

@@ -2,7 +2,7 @@
 
 # omarchy:summary=Take a screenshot
 # omarchy:group=capture
-# omarchy:args=[smart|region|windows|fullscreen] [slurp|copy|save] [--editor=<name>]
+# omarchy:args=[smart|region|windows|fullscreen] [slurp|copy] [--editor=<name>]
 # omarchy:examples=omarchy screenshot | omarchy capture screenshot region
 # omarchy:aliases=omarchy screenshot
 
@@ -126,22 +126,14 @@ esac
 FILENAME="screenshot-$(date +'%Y-%m-%d_%H-%M-%S').png"
 FILEPATH="$OUTPUT_DIR/$FILENAME"
 
-case "$PROCESSING" in
-  slurp)
-    grim -g "$SELECTION" "$FILEPATH" || exit 1
-    echo "$FILEPATH"
-    wl-copy <"$FILEPATH"
+if [[ $PROCESSING == "slurp" ]]; then
+  grim -g "$SELECTION" "$FILEPATH" || exit 1
+  wl-copy <"$FILEPATH"
 
-    (
-      ACTION=$(notify-send "Screenshot saved to clipboard and file" "Edit with Super + Alt + , (or click this)" -t 10000 -i "$FILEPATH" -A "default=edit")
-      [[ $ACTION == "default" ]] && open_editor "$FILEPATH"
-    ) >/dev/null 2>&1 &
-    ;;
-  copy)
-    grim -g "$SELECTION" - | wl-copy
-    ;;
-  save)
-    grim -g "$SELECTION" "$FILEPATH" || exit 1
-    echo "$FILEPATH"
-    ;;
-esac
+  (
+    ACTION=$(notify-send "Screenshot saved to clipboard and file" "Edit with Super + Alt + , (or click this)" -t 10000 -i "$FILEPATH" -A "default=edit")
+    [[ $ACTION == "default" ]] && open_editor "$FILEPATH"
+  ) &
+else
+  grim -g "$SELECTION" - | wl-copy
+fi

bin/omarchy-debug

@@ -74,13 +74,15 @@ ACTION=$(gum choose "${OPTIONS[@]}")
 
 case "$ACTION" in
   "Upload log")
-    echo "Uploading debug log to logs.omarchy.org..."
-    URL=$(curl -sf -F "file=@$LOG_FILE" https://logs.omarchy.org/)
+    echo "Uploading debug log to 0x0.st..."
+    URL=$(curl -sF "file=@$LOG_FILE" -Fexpires=24 https://0x0.st)
     if (( $? == 0 )) && [[ -n $URL ]]; then
       echo "✓ Log uploaded successfully!"
       echo "Share this URL:"
       echo ""
       echo "  $URL"
+      echo ""
+      echo "This link will expire in 24 hours."
     else
       echo "Error: Failed to upload log file"
       exit 1

bin/omarchy-haptic-touchpad

@@ -0,0 +1,96 @@
+#!/usr/bin/env python3
+
+# omarchy:summary=Run the Synaptics touchpad haptic feedback daemon
+
+"""Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
+
+Monitors touchpad button press events and sends haptic pulses via HID
+feature reports. Required because the kernel's HID haptic subsystem only
+supports Auto Trigger with waveform enumeration, not the simpler Manual
+Trigger protocol used by these Synaptics touchpads.
+"""
+
+import fcntl, glob, os, struct, sys
+
+VENDOR = "06CB"
+REPORT_ID = 0x37
+INTENSITY = 40  # 0-100
+
+# input_event: struct timeval (16 bytes on 64-bit) + type(H) + code(H) + value(i)
+EVENT_FORMAT = "llHHi"
+EVENT_SIZE = struct.calcsize(EVENT_FORMAT)
+EV_KEY = 0x01
+BTN_LEFT = 272
+BTN_RIGHT = 273
+BTN_MIDDLE = 274
+
+# ioctl: HIDIOCSFEATURE(len) = _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+def HIDIOCSFEATURE(length):
+    return 0xC0000000 | (length << 16) | (ord("H") << 8) | 0x06
+
+
+def find_hidraw():
+    for path in sorted(glob.glob("/sys/class/hidraw/hidraw*")):
+        uevent = os.path.join(path, "device", "uevent")
+        try:
+            with open(uevent) as f:
+                content = f.read().upper()
+            if f"0000{VENDOR}" in content:
+                return os.path.join("/dev", os.path.basename(path))
+        except OSError:
+            continue
+    return None
+
+
+def find_touchpad_event():
+    for path in sorted(glob.glob("/sys/class/input/event*/device/name")):
+        try:
+            with open(path) as f:
+                name = f.read().strip().upper()
+            if VENDOR in name and "TOUCHPAD" in name:
+                event = path.split("/")[-3]
+                return os.path.join("/dev/input", event)
+        except OSError:
+            continue
+    return None
+
+
+def main():
+    hidraw = find_hidraw()
+    if not hidraw:
+        print("No Synaptics haptic touchpad hidraw device found", file=sys.stderr)
+        sys.exit(1)
+
+    event = find_touchpad_event()
+    if not event:
+        print("No Synaptics haptic touchpad input device found", file=sys.stderr)
+        sys.exit(1)
+
+    print(f"Haptic touchpad: hidraw={hidraw} input={event} intensity={INTENSITY}", flush=True)
+
+    haptic_report = struct.pack("BB", REPORT_ID, INTENSITY)
+    ioctl_req = HIDIOCSFEATURE(len(haptic_report))
+
+    hidraw_fd = os.open(hidraw, os.O_RDWR)
+    event_fd = os.open(event, os.O_RDONLY)
+
+    try:
+        while True:
+            data = os.read(event_fd, EVENT_SIZE)
+            if len(data) < EVENT_SIZE:
+                continue
+            _, _, ev_type, code, value = struct.unpack(EVENT_FORMAT, data)
+            if ev_type == EV_KEY and code in (BTN_LEFT, BTN_RIGHT, BTN_MIDDLE) and value == 1:
+                try:
+                    fcntl.ioctl(hidraw_fd, ioctl_req, haptic_report)
+                except OSError:
+                    pass
+    except KeyboardInterrupt:
+        pass
+    finally:
+        os.close(event_fd)
+        os.close(hidraw_fd)
+
+
+if __name__ == "__main__":
+    main()

bin/omarchy-hw-dell-xps-haptic-touchpad

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Match Dell XPS systems with the Synaptics haptic touchpad.
-
-omarchy-hw-match "XPS" && [[ -e /sys/bus/i2c/devices/i2c-VEN_06CB:00 ]]

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Cycle focused Hyprland monitor scaling through 1x, 1.25x, 1.6x, 2x, 3x, and 4x
+# omarchy:summary=Cycle focused Hyprland monitor scaling through 1x, 1.25x, 1.6x, 2x, and 3x
 
 MONITOR_INFO=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)')
 ACTIVE_MONITOR=$(echo "$MONITOR_INFO" | jq -r '.name')
@@ -9,8 +9,8 @@ WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
 HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
 REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
 
-# Cycle through scales: 1 → 1.25 → 1.6 → 2 → 3 → 4 → 1 (or reverse with --reverse)
-SCALES=(1 1.25 1.6 2 3 4)
+# Cycle through scales: 1 → 1.25 → 1.6 → 2 → 3 → 1 (or reverse with --reverse)
+SCALES=(1 1.25 1.6 2 3)
 
 # Find the index of the scale closest to the current one (Hyprland may
 # snap fractional scales to nearby values, so we can't match exactly)

bin/omarchy-install-gaming-retroarch

@@ -21,10 +21,7 @@ omarchy-pkg-add \
   libretro-parallel-n64 libretro-picodrive libretro-play libretro-ppsspp \
   libretro-sameboy libretro-scummvm libretro-shaders-slang libretro-snes9x \
   libretro-yabause \
-  libretro-cap32-git libretro-fbneo-git libretro-uae-git \
-  libretro-vice-x128-git libretro-vice-x64-git libretro-vice-x64dtv-git libretro-vice-x64sc-git \
-  libretro-vice-xcbm2-git libretro-vice-xcbm5x0-git libretro-vice-xpet-git \
-  libretro-vice-xplus4-git libretro-vice-xscpu64-git libretro-vice-xvic-git \
+  libretro-cap32-git libretro-fbneo-git libretro-uae-git libretro-vice-git \
   libretro-database-git \
   retroarch-joypad-autoconfig-git
 

bin/omarchy-menu

@@ -233,18 +233,13 @@ show_hardware_menu() {
     options="$options\n󰟸  Touchpad"
   fi
 
-  if omarchy-hw-dell-xps-haptic-touchpad && omarchy-cmd-present dell-xps-touchpad-haptics; then
-    options="$options\n󰌌  Touchpad Haptics"
-  fi
-
   if omarchy-hw-touchscreen; then
     options="$options\n󰆽  Touchscreen"
   fi
 
   case $(menu "Toggle" "$options") in
   *Laptop*) omarchy-hyprland-monitor-internal toggle ;;
-  *Mirror*) omarchy-hyprland-monitor-internal-mirror toggle ;;
-  *Haptics*) show_hardware_touchpad_haptics_menu ;;
+  *Mirror*) omarchy-hyprland-monitor-internal-mirror toggle;;
   *Touchpad*) omarchy-toggle-touchpad ;;
   *Touchscreen*) omarchy-toggle-touchscreen ;;
   *"Hybrid GPU"*) present_terminal omarchy-toggle-hybrid-gpu ;;
@@ -252,17 +247,6 @@ show_hardware_menu() {
   esac
 }
 
-show_hardware_touchpad_haptics_menu() {
-  local current=$(dell-xps-touchpad-haptics get)
-  local selected=$(menu "Touchpad Haptics" "low\nmid\nhigh" "" "$current")
-
-  if [[ -n $selected ]]; then
-    dell-xps-touchpad-haptics set "$selected"
-  else
-    back_to show_hardware_menu
-  fi
-}
-
 show_style_menu() {
   case $(menu "Style" "󰸌  Theme\n󰟵  Unlock\n  Font\n  Background\n  Hyprland\n󱄄  Screensaver\n  About") in
   *Theme*) show_theme_menu ;;
@@ -271,27 +255,33 @@ show_style_menu() {
   *Background*) show_background_menu ;;
   *Hyprland*) open_in_editor ~/.config/hypr/looknfeel.conf ;;
   *Screensaver*) show_screensaver_menu ;;
-  *About*) show_about_menu ;;
+  *About*) open_in_editor ~/.config/omarchy/branding/about.txt ;;
   *) show_main_menu ;;
   esac
 }
 
-show_about_menu() {
-  case $(menu "About" "  Edit Text\n  Set From Image\n  Restore Default") in
-  *Text*) omarchy-branding-about text ;;
-  *Image*) omarchy-branding-about image ;;
-  *Default*) omarchy-branding-about reset ;;
+show_screensaver_menu() {
+  case $(menu "Screensaver" "  Edit Text\n  Set From Image\n󱄄  Preview\n  Restore Default") in
+  *Text*) open_in_editor ~/.config/omarchy/branding/screensaver.txt ;;
+  *Image*) set_screensaver_from_image ;;
+  *Preview*) omarchy-launch-screensaver force ;;
+  *Default*) terminal bash -lc 'omarchy-screensaver-logo default; echo; read -n 1 -s -r -p "Press any key to close..."' ;;
   *) show_style_menu ;;
   esac
 }
 
-show_screensaver_menu() {
-  case $(menu "Screensaver" "  Edit Text\n  Set From Image\n  Restore Default") in
-  *Text*) omarchy-branding-screensaver text ;;
-  *Image*) omarchy-branding-screensaver image ;;
-  *Default*) omarchy-branding-screensaver reset ;;
-  *) show_style_menu ;;
-  esac
+set_screensaver_from_image() {
+  terminal bash -lc '
+    image=$(fd --type file --ignore-case --extension svg --extension png . "$HOME" 2>/dev/null | fzf --prompt "Logo image> ")
+    if [[ -n $image ]]; then
+      if omarchy-screensaver-logo "$image"; then
+        echo
+        echo "Preview with: omarchy-launch-screensaver force"
+      fi
+      echo
+      read -n 1 -s -r -p "Press any key to close..."
+    fi
+  '
 }
 
 show_theme_menu() {
@@ -346,8 +336,8 @@ show_setup_power_menu() {
 
 show_setup_security_menu() {
   case $(menu "Setup" "󰈷  Fingerprint\n  Fido2") in
-  *Fingerprint*) present_terminal omarchy-setup-security-fingerprint ;;
-  *Fido2*) present_terminal omarchy-setup-security-fido2 ;;
+  *Fingerprint*) present_terminal omarchy-setup-fingerprint ;;
+  *Fido2*) present_terminal omarchy-setup-fido2 ;;
   *) show_setup_menu ;;
   esac
 }
@@ -578,7 +568,7 @@ show_install_ai_menu() {
 }
 
 show_install_gaming_menu() {
-  case $(menu "Install" "  Steam\n  RetroArch\n󰍳  Minecraft\n󰢹  NVIDIA GeForce NOW\n  Xbox Cloud Gaming\n󰂯  Xbox Controller\n󰍹  Moonlight (GameStream)\n  Lutris (Battle.net)\n󱓟  Heroic (Epic Games)") in
+  case $(menu "Install" "  Steam\n  RetroArch\n󰍳  Minecraft\n󰢹  NVIDIA GeForce NOW\n  Xbox Cloud Gaming\n󰖺  Xbox Controller (󰂯)\n󰍹  Moonlight (GameStream)\n  Lutris (Battle.net)\n󱓟  Heroic (Epic Games)") in
   *Steam*) present_terminal omarchy-install-gaming-steam ;;
   *RetroArch*) present_terminal omarchy-install-gaming-retroarch ;;
   *Minecraft*) install_and_launch "Minecraft" "minecraft-launcher" "minecraft-launcher" ;;
@@ -660,30 +650,23 @@ show_install_elixir_menu() {
 }
 
 show_remove_menu() {
-  case $(menu "Remove" "󰣇  Package\n  Web App\n  TUI\n󰵮  Development\n󰸌  Theme\n  Browser\n  Dictation\n  Gaming\n󰍲  Windows\n󰏓  Preinstalls\n  Security") in
+  case $(menu "Remove" "󰣇  Package\n  Browser\n  Web App\n  TUI\n󰵮  Development\n  Gaming\n󰏓  Preinstalls\n  Dictation\n󰸌  Theme\n󰍲  Windows\n󰈷  Fingerprint\n  Fido2") in
   *Package*) terminal omarchy-pkg-remove ;;
+  *Browser*) show_remove_browser_menu ;;
   *Web*) present_terminal omarchy-webapp-remove ;;
   *TUI*) present_terminal omarchy-tui-remove ;;
   *Development*) show_remove_development_menu ;;
-  *Theme*) present_terminal omarchy-theme-remove ;;
-  *Browser*) show_remove_browser_menu ;;
-  *Dictation*) present_terminal omarchy-voxtype-remove ;;
   *Gaming*) show_remove_gaming_menu ;;
-  *Windows*) present_terminal "omarchy-windows-vm remove" ;;
   *Preinstalls*) present_terminal omarchy-remove-preinstalls ;;
-  *Security*) show_remove_security_menu ;;
+  *Dictation*) present_terminal omarchy-voxtype-remove ;;
+  *Theme*) present_terminal omarchy-theme-remove ;;
+  *Windows*) present_terminal "omarchy-windows-vm remove" ;;
+  *Fingerprint*) present_terminal "omarchy-setup-fingerprint --remove" ;;
+  *Fido2*) present_terminal "omarchy-setup-fido2 --remove" ;;
   *) show_main_menu ;;
   esac
 }
 
-show_remove_security_menu() {
-  case $(menu "Remove" "󰈷  Fingerprint\n  Fido2") in
-  *Fingerprint*) present_terminal omarchy-remove-security-fingerprint ;;
-  *Fido2*) present_terminal omarchy-remove-security-fido2 ;;
-  *) show_remove_menu ;;
-  esac
-}
-
 show_remove_browser_menu() {
   case $(menu "Remove" "  Chrome\n  Edge\n  Brave\n  Brave Origin\n  Firefox\n  Zen") in
   *Chrome*) present_terminal "omarchy-remove-browser chrome" ;;

bin/omarchy-menu-file

@@ -30,19 +30,16 @@ for path in "${paths[@]}"; do
   [[ -e $path ]] || { echo "Path not found: $path" >&2; exit 1; }
 done
 
-find_args=("${paths[@]}" "(" -type d -name ".*" ! -name "." -prune ")" -o -type f ! -name ".*" "(")
-first_format=true
+find_args=("${paths[@]}" -type f "(")
 for format in "${formats[@]}"; do
-  if [[ $first_format == "true" ]]; then
-    first_format=false
-  else
+  if (( ${#find_args[@]} > ${#paths[@]} + 3 )); then
     find_args+=(-o)
   fi
 
   format="${format#.}"
   find_args+=(-iname "*.$format")
 done
-find_args+=(")" -printf '%T@\t%p\n')
+find_args+=(")")
 
-find "${find_args[@]}" 2>/dev/null | sort -rn | cut -f2- |
+find "${find_args[@]}" -printf '%T@\t%p\n' 2>/dev/null | sort -rn | cut -f2- |
   omarchy-launch-walker --dmenu --width 800 --minheight 1 --maxheight 500 -p "$label…" "$@" 2>/dev/null

bin/omarchy-reinstall-git

@@ -6,6 +6,6 @@ set -e
 
 # Reinstall the Omarchy configuration directory from the git source.
 
-git clone --depth=1 --branch master "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
+git clone --depth=1 "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
 mv $OMARCHY_PATH ~/.local/share/omarchy-old
 mv ~/.local/share/omarchy-new $OMARCHY_PATH

bin/omarchy-remove-gaming-retroarch

@@ -21,10 +21,7 @@ omarchy-pkg-drop \
   libretro-parallel-n64 libretro-picodrive libretro-play libretro-ppsspp \
   libretro-sameboy libretro-scummvm libretro-shaders-slang libretro-snes9x \
   libretro-yabause \
-  libretro-cap32-git libretro-fbneo-git libretro-uae-git \
-  libretro-vice-x128-git libretro-vice-x64-git libretro-vice-x64dtv-git libretro-vice-x64sc-git \
-  libretro-vice-xcbm2-git libretro-vice-xcbm5x0-git libretro-vice-xpet-git \
-  libretro-vice-xplus4-git libretro-vice-xscpu64-git libretro-vice-xvic-git \
+  libretro-cap32-git libretro-fbneo-git libretro-uae-git libretro-vice-git \
   retroarch-joypad-autoconfig-git
 
 rm -rf \

bin/omarchy-remove-security-fido2

@@ -1,35 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Remove FIDO2 authentication from sudo and polkit
-# omarchy:requires-sudo=true
-
-set -e
-
-
-remove_pam_config() {
-  # Remove from sudo
-  if grep -q pam_u2f.so /etc/pam.d/sudo; then
-    echo "Removing FIDO2 authentication from sudo..."
-    sudo sed -i '/pam_u2f\.so/d' /etc/pam.d/sudo
-  fi
-
-  # Remove from polkit
-  if [[ -f /etc/pam.d/polkit-1 ]] && grep -Fq 'pam_u2f.so' /etc/pam.d/polkit-1; then
-    echo "Removing FIDO2 authentication from polkit..."
-    sudo sed -i '/pam_u2f\.so/d' /etc/pam.d/polkit-1
-  fi
-}
-
-echo -e "\e[32mRemoving FIDO2 device from authentication.\n\e[0m"
-
-remove_pam_config
-
-if [[ -d /etc/fido2 ]]; then
-  echo "Removing FIDO2 configuration..."
-  sudo rm -rf /etc/fido2
-fi
-
-echo "Removing FIDO2 packages..."
-omarchy-pkg-drop libfido2 pam-u2f
-
-echo -e "\e[32mFIDO2 authentication has been completely removed.\e[0m"

bin/omarchy-remove-security-fingerprint

@@ -1,37 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Remove fingerprint authentication from sudo, polkit, and lock screen
-# omarchy:requires-sudo=true
-
-set -e
-
-
-remove_pam_config() {
-  # Remove from sudo
-  if grep -q pam_fprintd.so /etc/pam.d/sudo; then
-    echo "Removing fingerprint authentication from sudo..."
-    sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/sudo
-  fi
-
-  # Remove from polkit
-  if [[ -f /etc/pam.d/polkit-1 ]] && grep -Fq 'pam_fprintd.so' /etc/pam.d/polkit-1; then
-    echo "Removing fingerprint authentication from polkit..."
-    sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/polkit-1
-  fi
-}
-
-remove_hyprlock_fingerprint_icon() {
-  echo "Removing fingerprint icon from hyprlock placeholder text..."
-  sed -i 's/placeholder_text = .*/placeholder_text = Enter Password/' ~/.config/hypr/hyprlock.conf
-  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = false/' ~/.config/hypr/hyprlock.conf
-}
-
-echo -e "\e[32mRemoving fingerprint scanner from authentication.\n\e[0m"
-
-remove_pam_config
-remove_hyprlock_fingerprint_icon
-
-echo "Removing fingerprint packages..."
-omarchy-pkg-drop fprintd libfprint-git
-
-echo -e "\e[32mFingerprint authentication has been completely removed.\e[0m"

bin/omarchy-restart-swayosd

@@ -2,8 +2,8 @@
 
 # omarchy:summary=Restart the SwayOSD server
 
-systemctl --user daemon-reload
-systemctl --user stop swayosd-server.service || true
-pkill -x swayosd-server || true
-systemctl --user reset-failed swayosd-server.service || true
-systemctl --user enable --now swayosd-server.service
+if systemctl --user is-enabled --quiet swayosd-server.service; then
+  systemctl --user restart swayosd-server.service
+else
+  omarchy-restart-app swayosd-server
+fi

bin/omarchy-restart-waybar

@@ -3,5 +3,4 @@
 # omarchy:summary=Restart Waybar
 # omarchy:examples=omarchy restart waybar
 
-pkill -9 -x waybar
-setsid uwsm-app -- waybar >/dev/null 2>&1 &
+omarchy-restart-app waybar

bin/omarchy-screensaver-logo

@@ -1,18 +1,18 @@
 #!/bin/bash
 
-# omarchy:summary=Transcode an image into ASCII/Unicode art text
-# omarchy:group=transcode
-# omarchy:name=ascii
-# omarchy:args=<input-image.svg|png> <output-path> [--width <columns>] [--height <rows>] [--mode <braille|block>] [--threshold <percent>] [--invert]
-# omarchy:examples=omarchy transcode ascii ~/logo.svg /tmp/logo.txt | omarchy transcode ascii ~/logo.png ~/.config/omarchy/branding/screensaver.txt --width 80
+# omarchy:summary=Set the screensaver logo text from an SVG/PNG or the default
+# omarchy:args=<default|path-to-logo.svg|png> [--width <columns>] [--height <rows>] [--mode <braille|block>] [--threshold <percent>] [--invert] [--stdout]
+# omarchy:examples=omarchy screensaver logo ~/logo.svg | omarchy screensaver logo default | omarchy screensaver logo ~/logo.png --width 80 --mode block --stdout
 
 set -o pipefail
 
 usage() {
   cat <<'EOF'
-Usage: omarchy-transcode-ascii <input-image.svg|png> <output-path> [options]
+Usage: omarchy-screensaver-logo <default|path-to-logo.svg|png> [options]
 
-Transcodes an image into ASCII/Unicode art text.
+Sets the screensaver logo text from an image.
+Pass "default" instead of an image path to restore the Omarchy default.
+By default, writes to ~/.config/omarchy/branding/screensaver.txt.
 
 Options:
   -w, --width <columns>       Maximum output width in terminal columns (default: 80)
@@ -21,6 +21,7 @@ Options:
   -t, --threshold <percent>   Pixel threshold from 0-100 (default: 50)
       --invert                Treat light pixels as the logo instead of dark pixels
       --no-trim               Preserve surrounding whitespace/background
+      --stdout                Print converted text instead of writing the screensaver file
       --help                  Show this help
 EOF
 }
@@ -31,8 +32,9 @@ mode=braille
 threshold=50
 invert=false
 trim=true
+output_path="$HOME/.config/omarchy/branding/screensaver.txt"
 image_path=""
-output_path=""
+reset_default=false
 
 while (($# > 0)); do
   case "$1" in
@@ -96,6 +98,9 @@ while (($# > 0)); do
   --no-trim)
     trim=false
     ;;
+  --stdout)
+    output_path="-"
+    ;;
   --)
     shift
     break
@@ -106,10 +111,10 @@ while (($# > 0)); do
     exit 1
     ;;
   *)
-    if [[ -z $image_path ]]; then
+    if [[ $1 == "default" && -z $image_path ]]; then
+      reset_default=true
+    elif [[ -z $image_path ]]; then
       image_path="$1"
-    elif [[ -z $output_path ]]; then
-      output_path="$1"
     else
       echo "Unexpected argument: $1" >&2
       usage >&2
@@ -122,10 +127,10 @@ done
 
 if (($# > 0)); then
   while (($# > 0)); do
-    if [[ -z $image_path ]]; then
+    if [[ $1 == "default" && -z $image_path ]]; then
+      reset_default=true
+    elif [[ -z $image_path ]]; then
       image_path="$1"
-    elif [[ -z $output_path ]]; then
-      output_path="$1"
     else
       echo "Unexpected argument: $1" >&2
       usage >&2
@@ -135,7 +140,29 @@ if (($# > 0)); then
   done
 fi
 
-if [[ -z $image_path || -z $output_path ]]; then
+if [[ $reset_default == "true" ]]; then
+  if [[ -n $image_path ]]; then
+    echo "default does not accept an image path" >&2
+    exit 1
+  fi
+
+  default_path="${OMARCHY_PATH:-$HOME/.local/share/omarchy}/logo.txt"
+  if [[ ! -f $default_path ]]; then
+    echo "Default screensaver logo text not found: $default_path" >&2
+    exit 1
+  fi
+
+  if [[ $output_path == "-" ]]; then
+    cat "$default_path"
+  else
+    mkdir -p "$(dirname "$output_path")"
+    cp "$default_path" "$output_path"
+    echo "Restored default screensaver logo text to $output_path"
+  fi
+  exit 0
+fi
+
+if [[ -z $image_path ]]; then
   usage >&2
   exit 1
 fi
@@ -348,6 +375,10 @@ if [[ ! -s $tmp_output ]]; then
   exit 1
 fi
 
-mkdir -p "$(dirname "$output_path")"
-cp "$tmp_output" "$output_path"
-echo "Wrote ASCII art to $output_path"
+if [[ $output_path == "-" ]]; then
+  cat "$tmp_output"
+else
+  mkdir -p "$(dirname "$output_path")"
+  cp "$tmp_output" "$output_path"
+  echo "Wrote screensaver logo text to $output_path"
+fi

bin/omarchy-setup-fido2

@@ -0,0 +1,131 @@
+#!/bin/bash
+
+# omarchy:summary=Set up or remove FIDO2 authentication for sudo and polkit
+# omarchy:args=[--remove]
+# omarchy:requires-sudo=true
+
+set -e
+
+GREEN='\033[0;32m'
+RED='\033[0;31m'
+YELLOW='\033[1;33m'
+NC='\033[0m' # No Color
+
+print_success() {
+  echo -e "${GREEN}$1${NC}"
+}
+
+print_error() {
+  echo -e "${RED}$1${NC}"
+}
+
+print_info() {
+  echo -e "${YELLOW}$1${NC}"
+}
+
+check_fido2_hardware() {
+  tokens=$(fido2-token -L 2>/dev/null)
+  if [[ -z $tokens ]]; then
+    print_error "\nNo FIDO2 device detected. Please plug it in (you may need to unlock it as well)."
+    return 1
+  fi
+  return 0
+}
+
+setup_pam_config() {
+  # Configure sudo
+  if ! grep -q pam_u2f.so /etc/pam.d/sudo; then
+    print_info "Configuring sudo for FIDO2 authentication..."
+    sudo sed -i '1i auth    sufficient pam_u2f.so cue authfile=/etc/fido2/fido2' /etc/pam.d/sudo
+  fi
+
+  # Configure polkit
+  if [[ -f /etc/pam.d/polkit-1 ]] && ! grep -q 'pam_u2f.so' /etc/pam.d/polkit-1; then
+    print_info "Configuring polkit for FIDO2 authentication..."
+    sudo sed -i '1i auth      sufficient pam_u2f.so cue authfile=/etc/fido2/fido2' /etc/pam.d/polkit-1
+  elif [[ ! -f /etc/pam.d/polkit-1 ]]; then
+    print_info "Creating polkit configuration with FIDO2 authentication..."
+    sudo tee /etc/pam.d/polkit-1 >/dev/null <<'EOF'
+auth      sufficient pam_u2f.so cue authfile=/etc/fido2/fido2
+auth      required pam_unix.so
+
+account   required pam_unix.so
+password  required pam_unix.so
+session   required pam_unix.so
+EOF
+  fi
+}
+
+remove_pam_config() {
+  # Remove from sudo
+  if grep -q pam_u2f.so /etc/pam.d/sudo; then
+    print_info "Removing FIDO2 authentication from sudo..."
+    sudo sed -i '/pam_u2f\.so/d' /etc/pam.d/sudo
+  fi
+
+  # Remove from polkit
+  if [[ -f /etc/pam.d/polkit-1 ]] && grep -Fq 'pam_u2f.so' /etc/pam.d/polkit-1; then
+    print_info "Removing FIDO2 authentication from polkit..."
+    sudo sed -i '/pam_u2f\.so/d' /etc/pam.d/polkit-1
+  fi
+}
+
+if [[ "--remove" == $1 ]]; then
+  print_success "Removing FIDO2 device from authentication.\n"
+
+  # Remove PAM configuration
+  remove_pam_config
+
+  # Remove FIDO2 configuration
+  if [[ -d /etc/fido2 ]]; then
+    print_info "Removing FIDO2 configuration..."
+    sudo rm -rf /etc/fido2
+  fi
+
+  # Uninstall packages
+  print_info "Removing FIDO2 packages..."
+  sudo pacman -Rns --noconfirm libfido2 pam-u2f
+
+  print_success "FIDO2 authentication has been completely removed."
+else
+  print_success "Setting up FIDO2 device for authentication.\n"
+
+  # Install required packages
+  print_info "Installing required packages..."
+  omarchy-pkg-add libfido2 pam-u2f
+
+  if ! check_fido2_hardware; then
+    exit 1
+  fi
+
+  # Create the pamu2fcfg file
+  if [[ ! -f /etc/fido2/fido2 ]]; then
+    sudo mkdir -p /etc/fido2
+    print_success "\nLet's setup your device by confirming on the device now."
+    print_info "Touch your FIDO2 key when it lights up...\n"
+
+    if pamu2fcfg >/tmp/fido2; then
+      sudo mv /tmp/fido2 /etc/fido2/fido2
+      print_success "FIDO2 device registered successfully!"
+    else
+      print_error "\nFIDO2 registration failed. Please try again."
+      exit 1
+    fi
+  else
+    print_info "FIDO2 device already registered."
+  fi
+
+  # Configure PAM
+  setup_pam_config
+
+  # Test with sudo
+  print_info "\nTesting FIDO2 authentication with sudo..."
+  print_info "Touch your FIDO2 key when prompted.\n"
+
+  if sudo echo "FIDO2 authentication test successful"; then
+    print_success "\nPerfect! FIDO2 authentication is now configured."
+    print_info "You can use your FIDO2 key for sudo and polkit authentication."
+  else
+    print_error "\nVerification failed. You may want to check your configuration."
+  fi
+fi

bin/omarchy-setup-fingerprint

@@ -0,0 +1,161 @@
+#!/bin/bash
+
+# omarchy:summary=Set up or remove fingerprint authentication for sudo, polkit, and lock screen
+# omarchy:args=[--remove]
+# omarchy:requires-sudo=true
+
+set -e
+
+GREEN='\033[0;32m'
+RED='\033[0;31m'
+YELLOW='\033[1;33m'
+NC='\033[0m' # No Color
+
+print_success() {
+  echo -e "${GREEN}$1${NC}"
+}
+
+print_error() {
+  echo -e "${RED}$1${NC}"
+}
+
+print_info() {
+  echo -e "${YELLOW}$1${NC}"
+}
+
+check_fingerprint_hardware() {
+  # Get fingerprint devices for the user
+  devices=$(fprintd-list "$USER" 2>/dev/null)
+
+  # Exit if no devices found
+  if [[ -z $devices ]]; then
+    print_error "\nNo fingerprint sensor detected."
+    return 1
+  fi
+  return 0
+}
+
+setup_pam_config() {
+  # Configure sudo
+  if ! grep -q pam_fprintd.so /etc/pam.d/sudo; then
+    print_info "Configuring sudo for fingerprint authentication..."
+    sudo sed -i '1i auth    sufficient pam_fprintd.so' /etc/pam.d/sudo
+  fi
+
+  # Configure polkit
+  if [[ -f /etc/pam.d/polkit-1 ]] && ! grep -q 'pam_fprintd.so' /etc/pam.d/polkit-1; then
+    print_info "Configuring polkit for fingerprint authentication..."
+    sudo sed -i '1i auth      sufficient pam_fprintd.so' /etc/pam.d/polkit-1
+  elif [[ ! -f /etc/pam.d/polkit-1 ]]; then
+    print_info "Creating polkit configuration with fingerprint authentication..."
+    sudo tee /etc/pam.d/polkit-1 >/dev/null <<'EOF'
+auth      sufficient pam_fprintd.so
+auth      required pam_unix.so
+
+account   required pam_unix.so
+password  required pam_unix.so
+session   required pam_unix.so
+EOF
+  fi
+}
+
+add_hyprlock_fingerprint_icon() {
+  print_info "Adding fingerprint icon to hyprlock placeholder text..."
+  sed -i 's/placeholder_text = .*/placeholder_text = <span> Enter Password 󰈷 <\/span>/' ~/.config/hypr/hyprlock.conf
+  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = true/' ~/.config/hypr/hyprlock.conf
+}
+
+remove_hyprlock_fingerprint_icon() {
+  print_info "Removing fingerprint icon from hyprlock placeholder text..."
+  sed -i 's/placeholder_text = .*/placeholder_text = Enter Password/' ~/.config/hypr/hyprlock.conf
+  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = false/' ~/.config/hypr/hyprlock.conf
+}
+
+remove_pam_config() {
+  # Remove from sudo
+  if grep -q pam_fprintd.so /etc/pam.d/sudo; then
+    print_info "Removing fingerprint authentication from sudo..."
+    sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/sudo
+  fi
+
+  # Remove from polkit
+  if [[ -f /etc/pam.d/polkit-1 ]] && grep -Fq 'pam_fprintd.so' /etc/pam.d/polkit-1; then
+    print_info "Removing fingerprint authentication from polkit..."
+    sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/polkit-1
+  fi
+}
+
+if [[ "--remove" == $1 ]]; then
+  print_success "Removing fingerprint scanner from authentication.\n"
+
+  # Remove PAM configuration
+  remove_pam_config
+
+  # Remove fingerprint icon from hyprlock placeholder text
+  remove_hyprlock_fingerprint_icon
+
+  # Uninstall packages
+  print_info "Removing fingerprint packages..."
+  sudo pacman -Rns --noconfirm fprintd
+
+  print_success "Fingerprint authentication has been completely removed."
+else
+  print_success "Setting up fingerprint scanner for authentication.\n"
+
+  # Install required packages
+  print_info "Installing required packages..."
+
+  # ASUS ExpertBook B9406CAA ships a FocalTech FT9349 ESS reader (USB
+  # 2808:a97a). Mainline libfprint at 1.94.x lacks the focaltech_moc
+  # driver (and its 0xa97a id_table entry); OPR ships libfprint-git
+  # which carries both. Once upstream catches up, this branch is a
+  # no-op and `libfprint-git` provides=libfprint anyway. Detect via
+  # /sys to avoid depending on usbutils being installed first.
+  for v in /sys/bus/usb/devices/*/idVendor; do
+    [[ "$(cat "$v" 2>/dev/null)" == "2808" ]] || continue
+    [[ "$(cat "${v%idVendor}idProduct" 2>/dev/null)" == "a97a" ]] || continue
+    print_info "FocalTech FT9349 detected (B9406CAA) — using libfprint-git from OPR..."
+    # libfprint-git provides+conflicts libfprint; pacman -S --noconfirm
+    # defaults the conflict prompt to N and aborts. Pre-remove libfprint
+    # with -Rdd so the install goes silent. -Rdd (not omarchy-pkg-drop's
+    # -Rns) is required because fprintd requires libfprint; the dep is
+    # re-satisfied immediately by libfprint-git's provides=libfprint.
+    if omarchy-pkg-present libfprint; then
+      sudo pacman -Rdd --noconfirm libfprint
+    fi
+    omarchy-pkg-add libfprint-git
+    break
+  done
+
+  omarchy-pkg-add fprintd usbutils
+
+  if ! check_fingerprint_hardware; then
+    exit 1
+  fi
+
+  # Configure PAM
+  setup_pam_config
+
+  # Add fingerprint icon to hyprlock placeholder text
+  add_hyprlock_fingerprint_icon
+
+  # Enroll first fingerprint
+  print_success "\nLet's setup your right index finger as the first fingerprint."
+  print_info "Keep moving the finger around on sensor until the process completes.\n"
+
+  if sudo fprintd-enroll "$USER"; then
+    print_success "\nFingerprint enrolled successfully!"
+
+    # Verify
+    print_info "\nNow let's verify that it's working correctly.\n"
+    if fprintd-verify; then
+      print_success "\nPerfect! Fingerprint authentication is now configured."
+      print_info "You can use your fingerprint for sudo, polkit, and lock screen (Super + Escape)."
+    else
+      print_error "\nVerification failed. You may want to try enrolling again."
+    fi
+  else
+    print_error "\nEnrollment failed. Please try again."
+    exit 1
+  fi
+fi

bin/omarchy-setup-security-fido2

@@ -1,81 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Set up FIDO2 authentication for sudo and polkit
-# omarchy:requires-sudo=true
-
-set -e
-
-
-check_fido2_hardware() {
-  tokens=$(fido2-token -L 2>/dev/null)
-  if [[ -z $tokens ]]; then
-    echo -e "\e[31m\nNo FIDO2 device detected. Please plug it in (you may need to unlock it as well).\e[0m"
-    return 1
-  fi
-  return 0
-}
-
-setup_pam_config() {
-  # Configure sudo
-  if ! grep -q pam_u2f.so /etc/pam.d/sudo; then
-    echo "Configuring sudo for FIDO2 authentication..."
-    sudo sed -i '1i auth    sufficient pam_u2f.so cue authfile=/etc/fido2/fido2' /etc/pam.d/sudo
-  fi
-
-  # Configure polkit
-  if [[ -f /etc/pam.d/polkit-1 ]] && ! grep -q 'pam_u2f.so' /etc/pam.d/polkit-1; then
-    echo "Configuring polkit for FIDO2 authentication..."
-    sudo sed -i '1i auth      sufficient pam_u2f.so cue authfile=/etc/fido2/fido2' /etc/pam.d/polkit-1
-  elif [[ ! -f /etc/pam.d/polkit-1 ]]; then
-    echo "Creating polkit configuration with FIDO2 authentication..."
-    sudo tee /etc/pam.d/polkit-1 >/dev/null <<'EOF'
-auth      sufficient pam_u2f.so cue authfile=/etc/fido2/fido2
-auth      required pam_unix.so
-
-account   required pam_unix.so
-password  required pam_unix.so
-session   required pam_unix.so
-EOF
-  fi
-}
-
-echo -e "\e[32mSetting up FIDO2 device for authentication.\n\e[0m"
-
-# Install required packages
-echo "Installing required packages..."
-omarchy-pkg-add libfido2 pam-u2f
-
-if ! check_fido2_hardware; then
-  exit 1
-fi
-
-# Create the pamu2fcfg file
-if [[ ! -f /etc/fido2/fido2 ]]; then
-  sudo mkdir -p /etc/fido2
-  echo -e "\e[32m\nLet's setup your device by confirming on the device now.\e[0m"
-  echo -e "Touch your FIDO2 key when it lights up...\n"
-
-  if pamu2fcfg >/tmp/fido2; then
-    sudo mv /tmp/fido2 /etc/fido2/fido2
-    echo -e "\e[32mFIDO2 device registered successfully!\e[0m"
-  else
-    echo -e "\e[31m\nFIDO2 registration failed. Please try again.\e[0m"
-    exit 1
-  fi
-else
-  echo "FIDO2 device already registered."
-fi
-
-# Configure PAM
-setup_pam_config
-
-# Test with sudo
-echo -e "\nTesting FIDO2 authentication with sudo..."
-echo -e "Touch your FIDO2 key when prompted.\n"
-
-if sudo echo "FIDO2 authentication test successful"; then
-  echo -e "\e[32m\nPerfect! FIDO2 authentication is now configured.\e[0m"
-  echo "You can use your FIDO2 key for sudo and polkit authentication."
-else
-  echo -e "\e[31m\nVerification failed. You may want to check your configuration.\e[0m"
-fi

bin/omarchy-setup-security-fingerprint

@@ -1,95 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Set up fingerprint authentication for sudo, polkit, and lock screen
-# omarchy:requires-sudo=true
-
-set -e
-
-
-check_fingerprint_hardware() {
-  # Get fingerprint devices for the user
-  devices=$(fprintd-list "$USER" 2>/dev/null)
-
-  # Exit if no devices found
-  if [[ -z $devices ]]; then
-    echo -e "\e[31m\nNo fingerprint sensor detected.\e[0m"
-    return 1
-  fi
-  return 0
-}
-
-setup_pam_config() {
-  # Configure sudo
-  if ! grep -q pam_fprintd.so /etc/pam.d/sudo; then
-    echo "Configuring sudo for fingerprint authentication..."
-    sudo sed -i '1i auth    sufficient pam_fprintd.so' /etc/pam.d/sudo
-  fi
-
-  # Configure polkit
-  if [[ -f /etc/pam.d/polkit-1 ]] && ! grep -q 'pam_fprintd.so' /etc/pam.d/polkit-1; then
-    echo "Configuring polkit for fingerprint authentication..."
-    sudo sed -i '1i auth      sufficient pam_fprintd.so' /etc/pam.d/polkit-1
-  elif [[ ! -f /etc/pam.d/polkit-1 ]]; then
-    echo "Creating polkit configuration with fingerprint authentication..."
-    sudo tee /etc/pam.d/polkit-1 >/dev/null <<'EOF'
-auth      sufficient pam_fprintd.so
-auth      required pam_unix.so
-
-account   required pam_unix.so
-password  required pam_unix.so
-session   required pam_unix.so
-EOF
-  fi
-}
-
-add_hyprlock_fingerprint_icon() {
-  echo "Adding fingerprint icon to hyprlock placeholder text..."
-  sed -i 's/placeholder_text = .*/placeholder_text = <span> Enter Password 󰈷 <\/span>/' ~/.config/hypr/hyprlock.conf
-  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = true/' ~/.config/hypr/hyprlock.conf
-}
-
-echo -e "\e[32mSetting up fingerprint scanner for authentication.\n\e[0m"
-
-# Install required packages
-echo "Installing required packages..."
-
-installed_libfprint=$(pacman -Qq libfprint 2>/dev/null || true)
-
-# libfprint-git provides+conflicts libfprint; pacman -S --noconfirm
-# defaults the conflict prompt to N and aborts. Pre-remove the exact
-# libfprint package, but not an installed provider like libfprint-git.
-if [[ $installed_libfprint == "libfprint" ]]; then
-  sudo pacman -Rdd --noconfirm libfprint
-fi
-
-omarchy-pkg-add libfprint-git fprintd usbutils
-
-if ! check_fingerprint_hardware; then
-  exit 1
-fi
-
-# Configure PAM
-setup_pam_config
-
-# Add fingerprint icon to hyprlock placeholder text
-add_hyprlock_fingerprint_icon
-
-# Enroll first fingerprint
-echo -e "\e[32m\nLet's setup your right index finger as the first fingerprint.\e[0m"
-echo -e "Keep moving the finger around on sensor until the process completes.\n"
-
-if sudo fprintd-enroll "$USER"; then
-  echo -e "\e[32m\nFingerprint enrolled successfully!\e[0m"
-
-  # Verify
-  echo -e "\nNow let's verify that it's working correctly.\n"
-  if fprintd-verify; then
-    echo -e "\e[32m\nPerfect! Fingerprint authentication is now configured.\e[0m"
-    echo "You can use your fingerprint for sudo, polkit, and lock screen (Super + Escape)."
-  else
-    echo -e "\e[31m\nVerification failed. You may want to try enrolling again.\e[0m"
-  fi
-else
-  echo -e "\e[31m\nEnrollment failed. Please try again.\e[0m"
-  exit 1
-fi

bin/omarchy-update-keyring

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Ensure the Omarchy and Arch keyring packages are installed and populated
+# omarchy:summary=Ensure the Omarchy keyring package is installed and populated
 # omarchy:requires-sudo=true
 
 if omarchy-pkg-missing omarchy-keyring || ! sudo pacman-key --list-keys 40DFB630FF42BCFFB047046CF0134EE680CAC571 &>/dev/null; then
@@ -16,7 +16,5 @@ if omarchy-pkg-missing omarchy-keyring || ! sudo pacman-key --list-keys 40DFB630
 fi
 
 # Ensure we have the latest archlinux-keyring, maintainer keys might have changed
-# Always reinstall, as the keyring can be updated without a package version bump.
 echo -e "\e[32m\nUpdate Arch signing keys\e[0m"
-sudo pacman -Sy --noconfirm archlinux-keyring >/dev/null 2> >(grep -vE '^warning: archlinux-keyring-[^ ]+ is up to date -- reinstalling$' >&2)
-echo "Keys are correct"
+sudo pacman -Sy --noconfirm archlinux-keyring >/dev/null

bin/omarchy-upload-log

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Upload logs to logs.omarchy.org
+# omarchy:summary=Upload logs to 0x0.st
 # omarchy:args=<log-file>
 # omarchy:hidden=true
 
@@ -28,7 +28,7 @@ else
     echo "========================================="
     echo "SYSTEM INFORMATION"
     echo "========================================="
-    echo "Hostname: $(uname -n)"
+    echo "Hostname: $(hostname)"
     echo "Kernel: $(uname -r)"
     echo "Date: $(date)"
     echo ""
@@ -41,33 +41,19 @@ fi
 
 case "$LOG_TYPE" in
 install)
-  # In the live ISO before reboot, the target system is mounted at /mnt so the
-  # omarchy install log lives at /mnt/var/log/omarchy-install.log. On the
-  # installed system it's at /var/log/omarchy-install.log. Prefer whichever
-  # exists, with /mnt taking precedence (only present in the ISO context, and
-  # there it's the right one).
   ARCHINSTALL_LOG="/var/log/archinstall/install.log"
-  if [[ -s /mnt/var/log/omarchy-install.log ]]; then
-    OMARCHY_LOG="/mnt/var/log/omarchy-install.log"
-  else
-    OMARCHY_LOG="/var/log/omarchy-install.log"
-  fi
+  OMARCHY_LOG="/var/log/omarchy-install.log"
 
+  # Combine system info with logs
   cat "$SYSTEM_INFO" >"$TEMP_LOG"
-  [[ -s $ARCHINSTALL_LOG ]] && cat "$ARCHINSTALL_LOG" >>"$TEMP_LOG"
-  if [[ -s $OMARCHY_LOG ]]; then
-    printf '\n========================================\nOMARCHY INSTALL LOG (%s)\n========================================\n\n' "$OMARCHY_LOG" >>"$TEMP_LOG"
-    cat "$OMARCHY_LOG" >>"$TEMP_LOG"
-  else
-    echo "Warning: omarchy install log not found (looked at /mnt/var/log/ and /var/log/)" >&2
-  fi
+  cat $ARCHINSTALL_LOG $OMARCHY_LOG >>"$TEMP_LOG" 2>/dev/null
 
   if [[ ! -s $TEMP_LOG ]]; then
     echo "Error: No install logs found"
     exit 1
   fi
 
-  echo "Uploading installation log to logs.omarchy.org..."
+  echo "Uploading installation log to 0x0.st..."
   ;;
 
 this-boot)
@@ -80,7 +66,7 @@ this-boot)
     exit 1
   fi
 
-  echo "Uploading current boot logs to logs.omarchy.org..."
+  echo "Uploading current boot logs to 0x0.st..."
   ;;
 
 last-boot)
@@ -93,7 +79,7 @@ last-boot)
     exit 1
   fi
 
-  echo "Uploading previous boot logs to logs.omarchy.org..."
+  echo "Uploading previous boot logs to 0x0.st..."
   ;;
 
 installed|system-info)
@@ -112,7 +98,7 @@ installed|system-info)
     exit 1
   fi
 
-  echo "Uploading system information to logs.omarchy.org..."
+  echo "Uploading system information to 0x0.st..."
   ;;
 
 *)
@@ -127,13 +113,15 @@ esac
 
 echo ""
 
-URL=$(curl -sf -F "file=@$TEMP_LOG" https://logs.omarchy.org/)
+URL=$(curl -sF "file=@$TEMP_LOG" -Fexpires=24 https://0x0.st)
 
 if (( $? == 0 )) && [[ -n $URL ]]; then
   echo "✓ Log uploaded successfully!"
   echo "Share this URL:"
   echo ""
   echo "  $URL"
+  echo ""
+  echo "This link will expire in 24 hours."
 else
   echo "Error: Failed to upload log file"
   exit 1

bin/omarchy-weather-status

@@ -2,7 +2,7 @@
 
 # omarchy:summary=Returns a formatted weather status string with temperature and wind speed.
 
-weather=$(curl -fsS --max-time 4 "https://wttr.in?format=%l|%t|%w" 2>/dev/null | tr -d '\n')
+weather=$(curl -fsS --max-time 4 "https://wttr.in?m&format=%l|%t|%w" 2>/dev/null | tr -d '\n')
 
 if [[ -z $weather ]]; then
   echo "Weather unavailable"
@@ -12,6 +12,15 @@ fi
 IFS='|' read -r place temperature wind <<< "$weather"
 place=${place%%,*}
 place=${place^}
-temperature=${temperature#+}
+format_temperature() {
+  local celsius=${1#+}
+  celsius=${celsius//°/}
+  celsius=${celsius%C}
+
+  echo "${celsius}°c / $((celsius * 9 / 5 + 32))°f"
+}
+
+temperature=$(format_temperature "$temperature")
+wind=${wind//km\// km/}
 
 echo "$(omarchy-weather-icon)    $place  ·  Temp $temperature  ·  Wind $wind"

boot.sh

@@ -1,7 +1,5 @@
 #!/bin/bash
 
-set -e
-
 # Set install mode to online since boot.sh is used for curl installations
 export OMARCHY_ONLINE_INSTALL=true
 
@@ -40,9 +38,13 @@ sudo pacman -Syu --noconfirm --needed git
 OMARCHY_REPO="${OMARCHY_REPO:-basecamp/omarchy}"
 
 echo -e "\nCloning Omarchy from: https://github.com/${OMARCHY_REPO}.git"
-echo -e "\e[32mUsing branch: $OMARCHY_REF\e[0m"
 rm -rf ~/.local/share/omarchy/
-git clone --branch "$OMARCHY_REF" "https://github.com/${OMARCHY_REPO}.git" ~/.local/share/omarchy >/dev/null
+git clone "https://github.com/${OMARCHY_REPO}.git" ~/.local/share/omarchy >/dev/null
+
+echo -e "\e[32mUsing branch: $OMARCHY_REF\e[0m"
+cd ~/.local/share/omarchy
+git fetch origin "${OMARCHY_REF}" && git checkout "${OMARCHY_REF}"
+cd -
 
 echo -e "\nInstallation starting..."
 source ~/.local/share/omarchy/install.sh

config/chromium-flags.conf

@@ -1,4 +1,4 @@
 --ozone-platform=wayland
 --ozone-platform-hint=wayland
---enable-features=TouchpadOverscrollHistoryNavigation
+--enable-features=TouchpadOverscrollHistoryNavigation,VaapiVideoDecodeLinuxGL,VaapiVideoEncoder
 --load-extension=~/.local/share/omarchy/default/chromium/extensions/copy-url

config/elephant/symbols.toml

@@ -1 +1 @@
-command = 'wl-copy && hyprctl dispatch sendshortcut "SHIFT,Insert,activewindow"'
+command = 'wl-copy && hyprctl dispatch sendshortcut "SHIFT, Insert,"'

config/waybar/config.jsonc

@@ -5,7 +5,7 @@
   "spacing": 0,
   "height": 26,
   "modules-left": ["custom/omarchy", "hyprland/workspaces"],
-  "modules-center": ["clock", "custom/weather", "custom/update", "custom/voxtype", "custom/screenrecording-indicator", "custom/idle-indicator", "custom/notification-silencing-indicator"],
+  "modules-center": ["clock", "custom/weather", "custom/update", "custom/ai-indicator", "custom/voxtype", "custom/screenrecording-indicator", "custom/idle-indicator", "custom/notification-silencing-indicator"],
   "modules-right": [
     "group/tray-expander",
     "bluetooth",
@@ -69,7 +69,7 @@
   "custom/weather": {
     "exec": "$OMARCHY_PATH/default/waybar/weather.sh",
     "return-type": "json",
-    "interval": 60,
+    "interval": 600,
     "tooltip": false,
     "on-click": "notify-send -u low \"$(omarchy-weather-status)\""
   },
@@ -144,6 +144,12 @@
     "on-scroll-left": "",
     "on-scroll-right": ""
   },
+  "custom/ai-indicator": {
+    "exec": "$OMARCHY_PATH/default/waybar/indicators/ai.sh",
+    "signal": 11,
+    "interval": 1,
+    "return-type": "json"
+  },
   "custom/screenrecording-indicator": {
     "on-click": "omarchy-capture-screenrecording",
     "exec": "$OMARCHY_PATH/default/waybar/indicators/screen-recording.sh",

config/waybar/style.css

@@ -82,6 +82,7 @@ tooltip {
   opacity: 0;
 }
 
+#custom-ai-indicator,
 #custom-screenrecording-indicator,
 #custom-idle-indicator,
 #custom-notification-silencing-indicator {
@@ -92,6 +93,7 @@ tooltip {
   padding-bottom: 1px;
 }
 
+#custom-ai-indicator.active,
 #custom-screenrecording-indicator.active {
   color: #a55555;
 }

default/bash/completions

@@ -40,17 +40,6 @@ _omarchy_complete() {
     candidates+=("--all" "--json" "--markdown" "--check")
   fi
 
-  if (( ${#candidates[@]} == 0 )) && [[ -x $bin_dir/$prefix ]]; then
-    local args enum
-    args=$(grep -m 1 '^# omarchy:args=<' "$bin_dir/$prefix" 2>/dev/null)
-    enum="${args#*<}"
-    enum="${enum%%>*}"
-
-    if [[ $enum == *"|"* && $enum != *" "* ]]; then
-      read -r -a candidates <<<"${enum//|/ }"
-    fi
-  fi
-
   if (( ${#candidates[@]} > 0 )); then
     local IFS=$'\n'
     COMPREPLY=($(compgen -W "${candidates[*]}" -- "$cur"))

default/hypr/bindings/clipboard.conf

@@ -1,5 +1,5 @@
 # Copy / Paste
-bindd = SUPER, C, Universal copy, sendshortcut, CTRL, Insert, activewindow
-bindd = SUPER, V, Universal paste, sendshortcut, SHIFT, Insert, activewindow
-bindd = SUPER, X, Universal cut, sendshortcut, CTRL, X, activewindow
+bindd = SUPER, C, Universal copy, sendshortcut, CTRL, Insert,
+bindd = SUPER, V, Universal paste, sendshortcut, SHIFT, Insert,
+bindd = SUPER, X, Universal cut, sendshortcut, CTRL, X,
 bindd = SUPER CTRL, V, Clipboard manager, exec, omarchy-launch-walker -m clipboard

default/hypr/bindings/tiling.conf

@@ -6,7 +6,7 @@ bindd = SUPER, W, Close window, killactive,
 bindd = CTRL ALT, DELETE, Close all windows, exec, omarchy-hyprland-window-close-all
 
 # Control tiling
-bindd = SUPER, J, Toggle window split, layoutmsg, togglesplit
+bindd = SUPER, J, Toggle window split, togglesplit, # dwindle
 bindd = SUPER, P, Pseudo window, pseudo, # dwindle
 bindd = SUPER SHIFT, V, Toggle window floating/tiling, togglefloating,
 bindd = SHIFT, F11, Force full screen, fullscreen, 0

default/hypr/bindings/utilities.conf

@@ -4,6 +4,7 @@ bindd = SUPER CTRL, E, Emoji picker, exec, omarchy-launch-walker -m symbols
 bindd = SUPER CTRL, C, Capture menu, exec, omarchy-menu capture
 bindd = SUPER CTRL, O, Toggle menu, exec, omarchy-menu toggle
 bindd = SUPER CTRL, H, Hardware menu, exec, omarchy-menu hardware
+bindd = SUPER CTRL, P, AI prompt, exec, omarchy-ai-prompt
 bindd = SUPER ALT, SPACE, Omarchy menu, exec, omarchy-menu
 bindd = SUPER SHIFT, code:201, Omarchy menu, exec, omarchy-menu
 bindd = SUPER, ESCAPE, System menu, exec, omarchy-menu system
@@ -67,6 +68,8 @@ bindd = SUPER CTRL, X, Toggle dictation, exec, voxtype record toggle
 
 bindd  = , F9, Start dictation (push-to-talk), exec, voxtype record start
 binddr = , F9, Stop dictation (push-to-talk),  exec, voxtype record stop
+bindd  = , F8, Start AI prompt dictation (push-to-talk), exec, omarchy-ai-prompt-transcribe start
+binddr = , F8, Stop AI prompt dictation (push-to-talk), exec, omarchy-ai-prompt-transcribe stop
 
 # Zoom
 bindd = SUPER CTRL, Z, Zoom in, exec, hyprctl keyword cursor:zoom_factor $(hyprctl getoption cursor:zoom_factor -j | jq '.float + 1')

default/hypr/looknfeel.conf

@@ -50,8 +50,8 @@ decoration {
 group {
     col.border_active = $activeBorderColor
     col.border_inactive = $inactiveBorderColor
-    col.border_locked_active = $activeBorderColor
-    col.border_locked_inactive = $inactiveBorderColor
+    col.border_locked_active = -1
+    col.border_locked_inactive = -1
 
     groupbar {
         font_size = 12
@@ -108,8 +108,9 @@ animations {
 
 # See https://wiki.hypr.land/Configuring/Layouts/Dwindle-Layout/ for more
 dwindle {
-    preserve_split = true
-    force_split = 2
+    pseudotile = true # Master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below
+    preserve_split = true # You probably want this
+    force_split = 2 # Always split on the right
 }
 
 scrolling {

default/omarchy-skill/SKILL.md

@@ -356,7 +356,7 @@ When user requests system changes:
 2. **Is it a config edit?** Edit in `~/.config/`, never `~/.local/share/omarchy/`
 3. **Is it a theme customization?** Create a NEW custom theme directory
 4. **Is it automation?** Use hooks in `~/.config/omarchy/hooks/`
-5. **Is it a package install?** Use `omarchy pkg add <pkgs...>` (or `omarchy pkg aur add <pkgs...>` for AUR-only packages)
+5. **Is it a package install?** Use `omarchy install package <pkgs...>` (or `omarchy pkg aur add <pkgs...>` for AUR-only packages)
 6. **Unsure if command exists?** Run `omarchy commands` (or `omarchy <group> --help` for one group)
 
 ### Reminder Requests

default/pi/agent/extensions/omarchy-system-theme.ts

@@ -7,7 +7,7 @@
 
 import { existsSync } from "node:fs";
 import { join } from "node:path";
-import type { ExtensionAPI } from "@earendil-works/pi-coding-agent";
+import type { ExtensionAPI } from "@mariozechner/pi-coding-agent";
 
 const home = process.env.HOME ?? "";
 const lightModePath = join(home, ".config/omarchy/current/theme/light.mode");

default/sddm/omarchy/Main.qml

@@ -96,7 +96,6 @@ Rectangle {
           color: "transparent"
           selectionColor: "transparent"
           selectedTextColor: "transparent"
-          cursorDelegate: Item {}
           focus: true
 
           onTextChanged: root.loginFailed = false

default/waybar/indicators/ai.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+
+state_file=${XDG_STATE_HOME:-$HOME/.local/state}/omarchy/indicators/ai
+
+if [[ -e $state_file ]]; then
+  state=$(<"$state_file")
+
+  if [[ $state == "listening" ]]; then
+    echo '{"text":"󱚟","class":"active listening","tooltip":"AI is listening"}'
+  else
+    if (( $(date +%s) % 2 == 0 )); then
+      echo '{"text":"󱜙","class":"active thinking","tooltip":"AI is thinking"}'
+    else
+      echo '{"text":"󱚥","class":"active thinking","tooltip":"AI is thinking"}'
+    fi
+  fi
+else
+  echo '{"text":"","class":"","tooltip":""}'
+fi

install/config/all.sh

@@ -50,6 +50,8 @@ run_logged $OMARCHY_INSTALL/config/hardware/intel/fred.sh
 run_logged $OMARCHY_INSTALL/config/hardware/intel/fix-wifi7-eht.sh
 run_logged $OMARCHY_INSTALL/config/hardware/intel/sof-firmware.sh
 
+run_logged $OMARCHY_INSTALL/config/hardware/dell/fix-xps-haptic-touchpad.sh
+
 run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-asus-ptl-display-backlight.sh
 run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-asus-ptl-b9406-display.sh
 run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-asus-ptl-b9406-touchpad.sh

install/config/hardware/bluetooth.sh

@@ -2,4 +2,5 @@
 chrootable_systemctl_enable bluetooth.service
 
 mkdir -p ~/.config/wireplumber/wireplumber.conf.d/
-cp "$OMARCHY_PATH/default/wireplumber/wireplumber.conf.d/bluetooth-a2dp-autoconnect.conf" ~/.config/wireplumber/wireplumber.conf.d/
+cp $OMARCHY_PATH/default/wireplumber/wireplumber.conf.d/bluetooth-a2dp-autoconnect.conf \
+  ~/.config/wireplumber/wireplumber.conf.d/

install/config/hardware/dell/fix-xps-haptic-touchpad.sh

@@ -0,0 +1,36 @@
+# Fix Dell XPS haptic touchpad.
+# The Synaptics haptic touchpad (vendor 06CB) uses the HID Manual Trigger
+# protocol, but the kernel's HID haptic subsystem only supports Auto Trigger.
+# This sets up a lightweight daemon that monitors touchpad button events and
+# sends haptic pulses via HID feature reports on the hidraw device.
+# Also disables I2C runtime PM to prevent the haptic engine losing state
+# across suspend/resume.
+
+if omarchy-hw-match "XPS" \
+  && ls /sys/bus/i2c/devices/i2c-VEN_06CB:00 2>/dev/null; then
+
+  # Keep I2C controller power on to prevent haptic engine losing state
+  sudo tee /etc/udev/rules.d/99-dell-xps-haptic-touchpad.rules << 'EOF'
+ACTION=="add", SUBSYSTEM=="pci", KERNEL=="0000:00:19.0", ATTR{power/control}="on"
+ACTION=="add", SUBSYSTEM=="platform", KERNEL=="i2c_designware.0", ATTR{power/control}="on"
+EOF
+  sudo udevadm control --reload-rules
+
+  # Haptic feedback daemon as a systemd service
+  sudo tee /etc/systemd/system/dell-xps-haptic-touchpad.service << SVC
+[Unit]
+Description=Dell XPS haptic touchpad feedback
+After=systemd-udev-settle.service
+
+[Service]
+Type=simple
+ExecStart=$OMARCHY_PATH/bin/omarchy-haptic-touchpad
+Restart=on-failure
+RestartSec=2
+
+[Install]
+WantedBy=multi-user.target
+SVC
+  sudo systemctl daemon-reload
+  sudo systemctl enable dell-xps-haptic-touchpad.service
+fi

install/config/increase-fd-limit.sh

@@ -4,7 +4,7 @@ sudo mkdir -p /etc/systemd/system.conf.d /etc/systemd/user.conf.d
 
 sudo tee /etc/systemd/system.conf.d/99-omarchy-nofile.conf >/dev/null <<'EOF'
 [Manager]
-DefaultLimitNOFILE=65536:524288
+DefaultLimitNOFILESoft=65536
 EOF
 
 sudo cp /etc/systemd/system.conf.d/99-omarchy-nofile.conf \

install/omarchy-other.packages

@@ -61,9 +61,6 @@ vulkan-asahi
 # Surface laptop support packages
 linux-firmware-marvell
 
-# Dell laptop support packages
-dell-xps-touchpad-haptics
-
 # T2 MacBook support packages
 apple-bcm-firmware
 apple-t2-audio-config

install/packaging/all.sh

@@ -7,5 +7,4 @@ run_logged $OMARCHY_INSTALL/packaging/tuis.sh
 run_logged $OMARCHY_INSTALL/packaging/npx.sh
 run_logged $OMARCHY_INSTALL/packaging/asus-rog.sh
 run_logged $OMARCHY_INSTALL/packaging/framework16.sh
-run_logged $OMARCHY_INSTALL/packaging/dell-xps-touchpad-haptics.sh
 run_logged $OMARCHY_INSTALL/packaging/surface.sh

install/packaging/dell-xps-touchpad-haptics.sh

@@ -1,3 +0,0 @@
-if omarchy-hw-dell-xps-haptic-touchpad; then
-  omarchy-pkg-add dell-xps-touchpad-haptics
-fi

install/packaging/tuis.sh

@@ -2,3 +2,4 @@ ICON_DIR="$HOME/.local/share/applications/icons"
 
 omarchy-tui-install "Disk Usage" "bash -c 'dust -r; read -n 1 -s'" float "$ICON_DIR/Disk Usage.png"
 omarchy-tui-install "Docker" "lazydocker" tile "$ICON_DIR/Docker.png"
+omarchy-tui-install "Cliamp" "cliamp" tile "$ICON_DIR/Cliamp.png"

migrations/1776346552.sh

@@ -1,3 +1,5 @@
+set -e
+
 echo "Enable Bluetooth A2DP auto-connect in WirePlumber"
 
 destination=~/.config/wireplumber/wireplumber.conf.d/bluetooth-a2dp-autoconnect.conf

migrations/1777620904.sh

@@ -3,6 +3,10 @@ echo "Add cliamp music TUI player (Super+Shift+Alt+M)"
 if omarchy-pkg-missing cliamp; then
   omarchy-pkg-add cliamp
 
+  cp ~/.local/share/omarchy/applications/icons/Cliamp.png ~/.local/share/applications/icons/Cliamp.png
+  gtk-update-icon-cache ~/.local/share/icons/hicolor &>/dev/null
+  omarchy-tui-install "Cliamp" "cliamp" tile "$HOME/.local/share/applications/icons/Cliamp.png"
+
   if [[ -f ~/.config/hypr/bindings.conf ]] && ! grep -q "cliamp" ~/.config/hypr/bindings.conf; then
     sed -i '/^bindd = SUPER SHIFT, M, Music, exec, omarchy-launch-or-focus spotify/a bindd = SUPER SHIFT ALT, M, Music TUI, exec, omarchy-launch-or-focus-tui cliamp' ~/.config/hypr/bindings.conf
   fi

migrations/1777653181.sh

@@ -1,14 +0,0 @@
-echo "Move Dell XPS touchpad haptics into the packaged service"
-
-if omarchy-hw-dell-xps-haptic-touchpad; then
-  sudo systemctl disable --now dell-xps-haptic-touchpad.service 2>/dev/null || true
-  sudo rm -f /etc/systemd/system/dell-xps-haptic-touchpad.service
-  sudo rm -f /etc/systemd/system/multi-user.target.wants/dell-xps-haptic-touchpad.service
-  sudo rm -rf /etc/systemd/system/dell-xps-haptic-touchpad.service.d
-  sudo rm -f /etc/udev/rules.d/99-dell-xps-haptic-touchpad.rules
-  sudo rm -f /etc/omarchy-dell-haptic-touchpad.env
-  sudo systemctl daemon-reload
-  sudo udevadm control --reload-rules
-
-  source "$OMARCHY_PATH/install/packaging/dell-xps-touchpad-haptics.sh"
-fi

migrations/1778139028.sh

@@ -6,7 +6,7 @@ WAYBAR_STYLE="$HOME/.config/waybar/style.css"
 if [[ -f $WAYBAR_CONFIG ]]; then
   if ! grep -q '"custom/weather"' "$WAYBAR_CONFIG"; then
     sed -i 's/"modules-center": \["clock",/"modules-center": ["clock", "custom\/weather",/' "$WAYBAR_CONFIG"
-    sed -i '/"network": {/i\  "custom/weather": {\n    "exec": "$OMARCHY_PATH/default/waybar/weather.sh",\n    "return-type": "json",\n    "interval": 60,\n    "tooltip": false,\n    "on-click": "notify-send -u low \\"$(omarchy-weather-status)\\""\n  },' "$WAYBAR_CONFIG"
+    sed -i '/"network": {/i\  "custom/weather": {\n    "exec": "$OMARCHY_PATH/default/waybar/weather.sh",\n    "return-type": "json",\n    "interval": 600,\n    "tooltip": false,\n    "on-click": "notify-send -u low \\"$(omarchy-weather-status)\\""\n  },' "$WAYBAR_CONFIG"
   fi
 fi
 

migrations/1778237131.sh

@@ -0,0 +1,15 @@
+echo "Add AI prompt command bindings and Waybar indicator"
+
+WAYBAR_CONFIG=~/.config/waybar/config.jsonc
+if [[ -f $WAYBAR_CONFIG ]] && ! grep -q "custom/ai-indicator" "$WAYBAR_CONFIG"; then
+  sed -i 's/"custom\/update", "custom\/voxtype"/"custom\/update", "custom\/ai-indicator", "custom\/voxtype"/' "$WAYBAR_CONFIG"
+  sed -i '/  "custom\/screenrecording-indicator": {/i\  "custom/ai-indicator": {\n    "exec": "$OMARCHY_PATH/default/waybar/indicators/ai.sh",\n    "signal": 11,\n    "interval": 1,\n    "return-type": "json"\n  },' "$WAYBAR_CONFIG"
+fi
+
+WAYBAR_STYLE=~/.config/waybar/style.css
+if [[ -f $WAYBAR_STYLE ]] && ! grep -q "custom-ai-indicator" "$WAYBAR_STYLE"; then
+  sed -i 's/#custom-screenrecording-indicator,/#custom-ai-indicator,\n#custom-screenrecording-indicator,/' "$WAYBAR_STYLE"
+  sed -i 's/#custom-screenrecording-indicator.active {/#custom-ai-indicator.active,\n#custom-screenrecording-indicator.active {/' "$WAYBAR_STYLE"
+fi
+
+omarchy-refresh-waybar

migrations/1778270869.sh

@@ -1,20 +0,0 @@
-echo "Remove VAAPI GL video feature flags from Chromium-based browser configs to prevent crashing on some machines"
-
-remove_chromium_vaapi_features() {
-  local file=$1
-
-  [[ -f $file ]] || return 0
-
-  sed -i --follow-symlinks \
-    -e '/^--enable-features=/ s/VaapiVideoDecodeLinuxGL//g' \
-    -e '/^--enable-features=/ s/VaapiVideoEncoder//g' \
-    -e '/^--enable-features=/ s/,,*/,/g' \
-    -e '/^--enable-features=/ s/=,/=/' \
-    -e '/^--enable-features=/ s/,$//' \
-    -e '/^--enable-features=$/d' \
-    "$file"
-}
-
-for flags_file in "$HOME"/.config/{chromium,chrome,google-chrome,google-chrome-beta,google-chrome-unstable,brave,brave-beta,brave-nightly,brave-origin-beta,microsoft-edge-stable,microsoft-edge-beta,microsoft-edge-dev,vivaldi-stable,vivaldi-snapshot,opera,opera-beta,opera-developer}-flags.conf; do
-  remove_chromium_vaapi_features "$flags_file"
-done

migrations/1778307905.sh

@@ -1,4 +0,0 @@
-echo "Remove Omarchy cliamp desktop stub and icon (replace by package inclusion)"
-
-rm -f ~/.local/share/applications/Cliamp.desktop
-rm -f ~/.local/share/applications/icons/Cliamp.png

migrations/1779516254.sh

@@ -1,11 +0,0 @@
-echo "Update elephant symbols paste shortcut for Hyprland 0.55"
-
-symbols_config=~/.config/elephant/symbols.toml
-
-if [[ -f $symbols_config ]]; then
-  sed -i 's/hyprctl dispatch sendshortcut "SHIFT, Insert,"/hyprctl dispatch sendshortcut "SHIFT,Insert,activewindow"/' "$symbols_config"
-else
-  omarchy-refresh-config elephant/symbols.toml
-fi
-
-omarchy-restart-walker

piper/en_US-amy-medium.onnx.json

@@ -0,0 +1,493 @@
+{
+  "audio": {
+    "sample_rate": 22050,
+    "quality": "medium"
+  },
+  "espeak": {
+    "voice": "en-us"
+  },
+  "inference": {
+    "noise_scale": 0.667,
+    "length_scale": 1,
+    "noise_w": 0.8
+  },
+  "phoneme_type": "espeak",
+  "phoneme_map": {},
+  "phoneme_id_map": {
+    "_": [
+      0
+    ],
+    "^": [
+      1
+    ],
+    "$": [
+      2
+    ],
+    " ": [
+      3
+    ],
+    "!": [
+      4
+    ],
+    "'": [
+      5
+    ],
+    "(": [
+      6
+    ],
+    ")": [
+      7
+    ],
+    ",": [
+      8
+    ],
+    "-": [
+      9
+    ],
+    ".": [
+      10
+    ],
+    ":": [
+      11
+    ],
+    ";": [
+      12
+    ],
+    "?": [
+      13
+    ],
+    "a": [
+      14
+    ],
+    "b": [
+      15
+    ],
+    "c": [
+      16
+    ],
+    "d": [
+      17
+    ],
+    "e": [
+      18
+    ],
+    "f": [
+      19
+    ],
+    "h": [
+      20
+    ],
+    "i": [
+      21
+    ],
+    "j": [
+      22
+    ],
+    "k": [
+      23
+    ],
+    "l": [
+      24
+    ],
+    "m": [
+      25
+    ],
+    "n": [
+      26
+    ],
+    "o": [
+      27
+    ],
+    "p": [
+      28
+    ],
+    "q": [
+      29
+    ],
+    "r": [
+      30
+    ],
+    "s": [
+      31
+    ],
+    "t": [
+      32
+    ],
+    "u": [
+      33
+    ],
+    "v": [
+      34
+    ],
+    "w": [
+      35
+    ],
+    "x": [
+      36
+    ],
+    "y": [
+      37
+    ],
+    "z": [
+      38
+    ],
+    "æ": [
+      39
+    ],
+    "ç": [
+      40
+    ],
+    "ð": [
+      41
+    ],
+    "ø": [
+      42
+    ],
+    "ħ": [
+      43
+    ],
+    "ŋ": [
+      44
+    ],
+    "œ": [
+      45
+    ],
+    "ǀ": [
+      46
+    ],
+    "ǁ": [
+      47
+    ],
+    "ǂ": [
+      48
+    ],
+    "ǃ": [
+      49
+    ],
+    "ɐ": [
+      50
+    ],
+    "ɑ": [
+      51
+    ],
+    "ɒ": [
+      52
+    ],
+    "ɓ": [
+      53
+    ],
+    "ɔ": [
+      54
+    ],
+    "ɕ": [
+      55
+    ],
+    "ɖ": [
+      56
+    ],
+    "ɗ": [
+      57
+    ],
+    "ɘ": [
+      58
+    ],
+    "ə": [
+      59
+    ],
+    "ɚ": [
+      60
+    ],
+    "ɛ": [
+      61
+    ],
+    "ɜ": [
+      62
+    ],
+    "ɞ": [
+      63
+    ],
+    "ɟ": [
+      64
+    ],
+    "ɠ": [
+      65
+    ],
+    "ɡ": [
+      66
+    ],
+    "ɢ": [
+      67
+    ],
+    "ɣ": [
+      68
+    ],
+    "ɤ": [
+      69
+    ],
+    "ɥ": [
+      70
+    ],
+    "ɦ": [
+      71
+    ],
+    "ɧ": [
+      72
+    ],
+    "ɨ": [
+      73
+    ],
+    "ɪ": [
+      74
+    ],
+    "ɫ": [
+      75
+    ],
+    "ɬ": [
+      76
+    ],
+    "ɭ": [
+      77
+    ],
+    "ɮ": [
+      78
+    ],
+    "ɯ": [
+      79
+    ],
+    "ɰ": [
+      80
+    ],
+    "ɱ": [
+      81
+    ],
+    "ɲ": [
+      82
+    ],
+    "ɳ": [
+      83
+    ],
+    "ɴ": [
+      84
+    ],
+    "ɵ": [
+      85
+    ],
+    "ɶ": [
+      86
+    ],
+    "ɸ": [
+      87
+    ],
+    "ɹ": [
+      88
+    ],
+    "ɺ": [
+      89
+    ],
+    "ɻ": [
+      90
+    ],
+    "ɽ": [
+      91
+    ],
+    "ɾ": [
+      92
+    ],
+    "ʀ": [
+      93
+    ],
+    "ʁ": [
+      94
+    ],
+    "ʂ": [
+      95
+    ],
+    "ʃ": [
+      96
+    ],
+    "ʄ": [
+      97
+    ],
+    "ʈ": [
+      98
+    ],
+    "ʉ": [
+      99
+    ],
+    "ʊ": [
+      100
+    ],
+    "ʋ": [
+      101
+    ],
+    "ʌ": [
+      102
+    ],
+    "ʍ": [
+      103
+    ],
+    "ʎ": [
+      104
+    ],
+    "ʏ": [
+      105
+    ],
+    "ʐ": [
+      106
+    ],
+    "ʑ": [
+      107
+    ],
+    "ʒ": [
+      108
+    ],
+    "ʔ": [
+      109
+    ],
+    "ʕ": [
+      110
+    ],
+    "ʘ": [
+      111
+    ],
+    "ʙ": [
+      112
+    ],
+    "ʛ": [
+      113
+    ],
+    "ʜ": [
+      114
+    ],
+    "ʝ": [
+      115
+    ],
+    "ʟ": [
+      116
+    ],
+    "ʡ": [
+      117
+    ],
+    "ʢ": [
+      118
+    ],
+    "ʲ": [
+      119
+    ],
+    "ˈ": [
+      120
+    ],
+    "ˌ": [
+      121
+    ],
+    "ː": [
+      122
+    ],
+    "ˑ": [
+      123
+    ],
+    "˞": [
+      124
+    ],
+    "β": [
+      125
+    ],
+    "θ": [
+      126
+    ],
+    "χ": [
+      127
+    ],
+    "ᵻ": [
+      128
+    ],
+    "ⱱ": [
+      129
+    ],
+    "0": [
+      130
+    ],
+    "1": [
+      131
+    ],
+    "2": [
+      132
+    ],
+    "3": [
+      133
+    ],
+    "4": [
+      134
+    ],
+    "5": [
+      135
+    ],
+    "6": [
+      136
+    ],
+    "7": [
+      137
+    ],
+    "8": [
+      138
+    ],
+    "9": [
+      139
+    ],
+    "̧": [
+      140
+    ],
+    "̃": [
+      141
+    ],
+    "̪": [
+      142
+    ],
+    "̯": [
+      143
+    ],
+    "̩": [
+      144
+    ],
+    "ʰ": [
+      145
+    ],
+    "ˤ": [
+      146
+    ],
+    "ε": [
+      147
+    ],
+    "↓": [
+      148
+    ],
+    "#": [
+      149
+    ],
+    "\"": [
+      150
+    ],
+    "↑": [
+      151
+    ],
+    "̺": [
+      152
+    ],
+    "̻": [
+      153
+    ]
+  },
+  "num_symbols": 256,
+  "num_speakers": 1,
+  "speaker_id_map": {},
+  "piper_version": "1.0.0",
+  "language": {
+    "code": "en_US",
+    "family": "en",
+    "region": "US",
+    "name_native": "English",
+    "name_english": "English",
+    "country_english": "United States"
+  },
+  "dataset": "amy"
+}

test/omarchy-cli-test.sh

@@ -69,8 +69,8 @@ pass "fallback commands are inferred and documented"
 "$CLI" commands --all --json | jq -e '.commands[] | select(.route == "omarchy dev benchmark")' >/dev/null
 pass "benchmark command is discoverable in all commands"
 
-"$CLI" commands --json | jq -e '.commands[] | select(.binary == "omarchy-pkg-add" and .route == "omarchy pkg add" and .filename_route == "omarchy pkg add" and (.routes | index("omarchy pkg add")))' >/dev/null
-pass "JSON exposes direct pkg add route"
+"$CLI" commands --json | jq -e '.commands[] | select(.binary == "omarchy-pkg-add" and .route == "omarchy install package" and .filename_route == "omarchy pkg add" and (.routes | index("omarchy pkg add")))' >/dev/null
+pass "JSON exposes canonical and filename-derived routes"
 
 "$CLI" commands --json | jq -e '.commands[] | select(.binary == "omarchy-refresh-pacman" and .requires_sudo == true)' >/dev/null
 pass "sudo metadata marks sudo commands"
@@ -79,12 +79,11 @@ output=$("$CLI" theme --help)
 assert_output_contains "group help renders" "$output" "Theme commands"
 
 output=$("$CLI" install --help)
-assert_output_contains "install group help renders" "$output" "Install commands"
-assert_output_contains "install group includes browser route" "$output" "omarchy install browser"
+assert_output_contains "install group help renders" "$output" "omarchy install package <packages...>"
 
 output=$("$CLI" install)
 assert_output_contains "bare group renders help instead of picker" "$output" "Install commands"
-assert_output_contains "bare group includes browser route" "$output" "omarchy install browser"
+assert_output_contains "bare group includes package route" "$output" "omarchy install package <packages...>"
 
 output=$("$CLI" toggle)
 assert_output_contains "bare root command with children renders help" "$output" "Toggle commands"
@@ -167,8 +166,8 @@ assert_output_contains "root alias resolves to command help" "$output" "omarchy-
 pass "aliases are included in JSON metadata"
 
 output=$("$CLI" pkg add --help)
-assert_output_contains "pkg add help resolves" "$output" "omarchy-pkg-add"
-assert_output_contains "pkg add help shows direct route" "$output" "omarchy pkg add <packages...>"
+assert_output_contains "fallback route resolves to curated metadata" "$output" "omarchy-pkg-add"
+assert_output_contains "fallback route shows canonical route" "$output" "omarchy install package <packages...>"
 
 output=$("$CLI" system reboot --help)
 assert_output_contains "system command help is safe" "$output" "omarchy-system-reboot"

version

@@ -1 +1 @@
-3.8.2
+3.8.0