Merge branch 'dev' into rc

bin/omarchy

@@ -29,6 +29,7 @@ declare -A GROUP_DESCRIPTIONS
 GROUP_DESCRIPTIONS[ac]="AC power detection"
 GROUP_DESCRIPTIONS[battery]="Battery status helpers"
 GROUP_DESCRIPTIONS[branch]="Omarchy git branch management"
+GROUP_DESCRIPTIONS[branding]="About and screensaver branding"
 GROUP_DESCRIPTIONS[brightness]="Display and keyboard brightness"
 GROUP_DESCRIPTIONS[capture]="Screenshots and screen recording"
 GROUP_DESCRIPTIONS[channel]="Omarchy release channel management"
@@ -54,6 +55,7 @@ GROUP_DESCRIPTIONS[plymouth]="Plymouth boot theme management"
 GROUP_DESCRIPTIONS[powerprofiles]="Power profile management"
 GROUP_DESCRIPTIONS[refresh]="Reset config to defaults"
 GROUP_DESCRIPTIONS[reinstall]="Reinstall and reset workflows"
+GROUP_DESCRIPTIONS[reminder]="Desktop notification reminders"
 GROUP_DESCRIPTIONS[remove]="Removal workflows"
 GROUP_DESCRIPTIONS[restart]="Restart Omarchy components"
 GROUP_DESCRIPTIONS[setup]="Interactive setup wizards"

bin/omarchy-branding-about

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+# omarchy:summary=Edit, set, or reset About branding
+# omarchy:group=branding
+# omarchy:name=about
+# omarchy:args=<image|text|reset>
+# omarchy:examples=omarchy branding about image | omarchy branding about text | omarchy branding about reset
+
+set -euo pipefail
+
+case "${1:-}" in
+image)
+  image=$(omarchy-menu-file "Logo image" "$HOME" "svg png")
+  if [[ -n $image ]] && omarchy-transcode-ascii "$image" ~/.config/omarchy/branding/about.txt --width 54 --height 26 --mode block; then
+    omarchy-launch-about >/dev/null 2>&1
+  fi
+  ;;
+text)
+  omarchy-launch-editor ~/.config/omarchy/branding/about.txt >/dev/null 2>&1 && omarchy-launch-about >/dev/null 2>&1
+  ;;
+reset)
+  cp "$OMARCHY_PATH/icon.txt" ~/.config/omarchy/branding/about.txt && omarchy-launch-about >/dev/null 2>&1
+  ;;
+*)
+  echo "Usage: omarchy-branding-about <image|text|reset>" >&2
+  exit 1
+  ;;
+esac

bin/omarchy-branding-screensaver

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+# omarchy:summary=Edit, set, or reset screensaver branding
+# omarchy:group=branding
+# omarchy:name=screensaver
+# omarchy:args=<image|text|reset>
+# omarchy:examples=omarchy branding screensaver image | omarchy branding screensaver text | omarchy branding screensaver reset
+
+set -euo pipefail
+
+case "${1:-}" in
+image)
+  image=$(omarchy-menu-file "Logo image" "$HOME" "svg png")
+  if [[ -n $image ]] && omarchy-transcode-ascii "$image" ~/.config/omarchy/branding/screensaver.txt; then
+    omarchy-launch-screensaver force >/dev/null 2>&1
+  fi
+  ;;
+text)
+  omarchy-launch-editor ~/.config/omarchy/branding/screensaver.txt >/dev/null 2>&1 && omarchy-launch-screensaver force >/dev/null 2>&1
+  ;;
+reset)
+  cp "$OMARCHY_PATH/logo.txt" ~/.config/omarchy/branding/screensaver.txt && omarchy-launch-screensaver force >/dev/null 2>&1
+  ;;
+*)
+  echo "Usage: omarchy-branding-screensaver <image|text|reset>" >&2
+  exit 1
+  ;;
+esac

bin/omarchy-first-run

@@ -16,6 +16,7 @@ if [[ -f $FIRST_RUN_MODE ]]; then
   bash "$OMARCHY_PATH/install/first-run/firewall.sh"
   bash "$OMARCHY_PATH/install/first-run/dns-resolver.sh"
   bash "$OMARCHY_PATH/install/first-run/gnome-theme.sh"
+  bash "$OMARCHY_PATH/install/first-run/swayosd.sh"
   bash "$OMARCHY_PATH/install/first-run/gtk-primary-paste.sh"
   bash "$OMARCHY_PATH/install/first-run/elephant.sh"
   omarchy-hook-install post-update "$OMARCHY_PATH/install/first-run/install-voxtype.hook"

bin/omarchy-haptic-touchpad

@@ -1,96 +0,0 @@
-#!/usr/bin/env python3
-
-# omarchy:summary=Run the Synaptics touchpad haptic feedback daemon
-
-"""Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
-
-Monitors touchpad button press events and sends haptic pulses via HID
-feature reports. Required because the kernel's HID haptic subsystem only
-supports Auto Trigger with waveform enumeration, not the simpler Manual
-Trigger protocol used by these Synaptics touchpads.
-"""
-
-import fcntl, glob, os, struct, sys
-
-VENDOR = "06CB"
-REPORT_ID = 0x37
-INTENSITY = 40  # 0-100
-
-# input_event: struct timeval (16 bytes on 64-bit) + type(H) + code(H) + value(i)
-EVENT_FORMAT = "llHHi"
-EVENT_SIZE = struct.calcsize(EVENT_FORMAT)
-EV_KEY = 0x01
-BTN_LEFT = 272
-BTN_RIGHT = 273
-BTN_MIDDLE = 274
-
-# ioctl: HIDIOCSFEATURE(len) = _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
-def HIDIOCSFEATURE(length):
-    return 0xC0000000 | (length << 16) | (ord("H") << 8) | 0x06
-
-
-def find_hidraw():
-    for path in sorted(glob.glob("/sys/class/hidraw/hidraw*")):
-        uevent = os.path.join(path, "device", "uevent")
-        try:
-            with open(uevent) as f:
-                content = f.read().upper()
-            if f"0000{VENDOR}" in content:
-                return os.path.join("/dev", os.path.basename(path))
-        except OSError:
-            continue
-    return None
-
-
-def find_touchpad_event():
-    for path in sorted(glob.glob("/sys/class/input/event*/device/name")):
-        try:
-            with open(path) as f:
-                name = f.read().strip().upper()
-            if VENDOR in name and "TOUCHPAD" in name:
-                event = path.split("/")[-3]
-                return os.path.join("/dev/input", event)
-        except OSError:
-            continue
-    return None
-
-
-def main():
-    hidraw = find_hidraw()
-    if not hidraw:
-        print("No Synaptics haptic touchpad hidraw device found", file=sys.stderr)
-        sys.exit(1)
-
-    event = find_touchpad_event()
-    if not event:
-        print("No Synaptics haptic touchpad input device found", file=sys.stderr)
-        sys.exit(1)
-
-    print(f"Haptic touchpad: hidraw={hidraw} input={event} intensity={INTENSITY}", flush=True)
-
-    haptic_report = struct.pack("BB", REPORT_ID, INTENSITY)
-    ioctl_req = HIDIOCSFEATURE(len(haptic_report))
-
-    hidraw_fd = os.open(hidraw, os.O_RDWR)
-    event_fd = os.open(event, os.O_RDONLY)
-
-    try:
-        while True:
-            data = os.read(event_fd, EVENT_SIZE)
-            if len(data) < EVENT_SIZE:
-                continue
-            _, _, ev_type, code, value = struct.unpack(EVENT_FORMAT, data)
-            if ev_type == EV_KEY and code in (BTN_LEFT, BTN_RIGHT, BTN_MIDDLE) and value == 1:
-                try:
-                    fcntl.ioctl(hidraw_fd, ioctl_req, haptic_report)
-                except OSError:
-                    pass
-    except KeyboardInterrupt:
-        pass
-    finally:
-        os.close(event_fd)
-        os.close(hidraw_fd)
-
-
-if __name__ == "__main__":
-    main()

bin/omarchy-hw-dell-xps-haptic-touchpad

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# omarchy:summary=Match Dell XPS systems with the Synaptics haptic touchpad.
+
+omarchy-hw-match "XPS" && [[ -e /sys/bus/i2c/devices/i2c-VEN_06CB:00 ]]

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Cycle focused Hyprland monitor scaling through 1x, 1.25x, 1.6x, 2x, and 3x
+# omarchy:summary=Cycle focused Hyprland monitor scaling through 1x, 1.25x, 1.6x, 2x, 3x, and 4x
 
 MONITOR_INFO=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true)')
 ACTIVE_MONITOR=$(echo "$MONITOR_INFO" | jq -r '.name')
@@ -9,8 +9,8 @@ WIDTH=$(echo "$MONITOR_INFO" | jq -r '.width')
 HEIGHT=$(echo "$MONITOR_INFO" | jq -r '.height')
 REFRESH_RATE=$(echo "$MONITOR_INFO" | jq -r '.refreshRate')
 
-# Cycle through scales: 1 → 1.25 → 1.6 → 2 → 3 → 1 (or reverse with --reverse)
+# Cycle through scales: 1 → 1.25 → 1.6 → 2 → 3 → 4 → 1 (or reverse with --reverse)
-SCALES=(1 1.25 1.6 2 3)
+SCALES=(1 1.25 1.6 2 3 4)
 
 # Find the index of the scale closest to the current one (Hyprland may
 # snap fractional scales to nearby values, so we can't match exactly)

bin/omarchy-menu

@@ -93,9 +93,10 @@ show_learn_menu() {
 }
 
 show_trigger_menu() {
-  case $(menu "Trigger" "  Capture\n󰧸  Transcode\n  Share\n󰔎  Toggle\n  Hardware") in
+  case $(menu "Trigger" "󰔛  Reminder\n  Capture\n󰧸  Transcode\n  Share\n󰔎  Toggle\n  Hardware") in
+  *Reminder*) show_reminder_menu ;;
   *Capture*) show_capture_menu ;;
-  *Transcode*) show_transcode_menu ;;
+  *Transcode*) omarchy-transcode || back_to show_trigger_menu ;;
   *Share*) show_share_menu ;;
   *Toggle*) show_toggle_menu ;;
   *Hardware*) show_hardware_menu ;;
@@ -103,6 +104,41 @@ show_trigger_menu() {
   esac
 }
 
+show_reminder_menu() {
+  case $(menu "Reminder" "󰔛  Set one\n󰔛  Show all\n󰔛  Clear all") in
+  *Set*) show_custom_reminder_input ;;
+  *"Show all"*) omarchy-reminder show ;;
+  *"Clear all"*) omarchy-reminder clear ;;
+  *) back_to show_trigger_menu ;;
+  esac
+}
+
+show_custom_reminder_input() {
+  local minutes
+  minutes=$(omarchy-menu-input "Remind in minutes")
+
+  if [[ $minutes =~ ^[0-9]+$ ]] && ((minutes > 0)); then
+    show_reminder_message_input "$minutes"
+  elif [[ -n $minutes ]]; then
+    omarchy-notification-send "󰔛" "Invalid reminder" "Enter the number of minutes" -u critical
+    show_custom_reminder_input
+  else
+    back_to show_reminder_menu
+  fi
+}
+
+show_reminder_message_input() {
+  local minutes="$1"
+  local message
+  message=$(omarchy-menu-input "Reminder message")
+
+  if [[ -n $message ]]; then
+    omarchy-reminder "$minutes" "$message"
+  else
+    omarchy-reminder "$minutes"
+  fi
+}
+
 show_capture_menu() {
   case $(menu "Capture" "  Screenshot\n  Screenrecord\n󰴑  Text Extraction\n󰃉  Color") in
   *Screenshot*) omarchy-capture-screenshot ;;
@@ -167,14 +203,6 @@ show_share_menu() {
   esac
 }
 
-show_transcode_menu() {
-  case $(menu "Transcode" "  Picture\n  Video") in
-  *Picture*) present_terminal "omarchy-transcode --path '$HOME/Pictures'" ;;
-  *Video*) present_terminal "omarchy-transcode --path '$HOME/Videos'" ;;
-  *) back_to show_trigger_menu ;;
-  esac
-}
-
 show_toggle_menu() {
   local options="󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰂛  Notifications\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Monitor Scaling\n  Direct Boot\n󰟵  Passwordless Sudo"
 
@@ -205,13 +233,18 @@ show_hardware_menu() {
     options="$options\n󰟸  Touchpad"
   fi
 
+  if omarchy-hw-dell-xps-haptic-touchpad && omarchy-cmd-present dell-xps-touchpad-haptics; then
+    options="$options\n󰌌  Touchpad Haptics"
+  fi
+
   if omarchy-hw-touchscreen; then
     options="$options\n󰆽  Touchscreen"
   fi
 
   case $(menu "Toggle" "$options") in
   *Laptop*) omarchy-hyprland-monitor-internal toggle ;;
-  *Mirror*) omarchy-hyprland-monitor-internal-mirror toggle;;
+  *Mirror*) omarchy-hyprland-monitor-internal-mirror toggle ;;
+  *Haptics*) show_hardware_touchpad_haptics_menu ;;
   *Touchpad*) omarchy-toggle-touchpad ;;
   *Touchscreen*) omarchy-toggle-touchscreen ;;
   *"Hybrid GPU"*) present_terminal omarchy-toggle-hybrid-gpu ;;
@@ -219,6 +252,17 @@ show_hardware_menu() {
   esac
 }
 
+show_hardware_touchpad_haptics_menu() {
+  local current=$(dell-xps-touchpad-haptics get)
+  local selected=$(menu "Touchpad Haptics" "low\nmid\nhigh" "" "$current")
+
+  if [[ -n $selected ]]; then
+    dell-xps-touchpad-haptics set "$selected"
+  else
+    back_to show_hardware_menu
+  fi
+}
+
 show_style_menu() {
   case $(menu "Style" "󰸌  Theme\n󰟵  Unlock\n  Font\n  Background\n  Hyprland\n󱄄  Screensaver\n  About") in
   *Theme*) show_theme_menu ;;
@@ -227,33 +271,27 @@ show_style_menu() {
   *Background*) show_background_menu ;;
   *Hyprland*) open_in_editor ~/.config/hypr/looknfeel.conf ;;
   *Screensaver*) show_screensaver_menu ;;
-  *About*) open_in_editor ~/.config/omarchy/branding/about.txt ;;
+  *About*) show_about_menu ;;
   *) show_main_menu ;;
   esac
 }
 
-show_screensaver_menu() {
+show_about_menu() {
-  case $(menu "Screensaver" "  Edit Text\n  Set From Image\n󱄄  Preview\n  Restore Default") in
+  case $(menu "About" "  Edit Text\n  Set From Image\n  Restore Default") in
-  *Text*) open_in_editor ~/.config/omarchy/branding/screensaver.txt ;;
+  *Text*) omarchy-branding-about text ;;
-  *Image*) set_screensaver_from_image ;;
+  *Image*) omarchy-branding-about image ;;
-  *Preview*) omarchy-launch-screensaver force ;;
+  *Default*) omarchy-branding-about reset ;;
-  *Default*) terminal bash -lc 'omarchy-screensaver-logo default; echo; read -n 1 -s -r -p "Press any key to close..."' ;;
   *) show_style_menu ;;
   esac
 }
 
-set_screensaver_from_image() {
+show_screensaver_menu() {
-  terminal bash -lc '
+  case $(menu "Screensaver" "  Edit Text\n  Set From Image\n  Restore Default") in
-    image=$(fd --type file --ignore-case --extension svg --extension png . "$HOME" 2>/dev/null | fzf --prompt "Logo image> ")
+  *Text*) omarchy-branding-screensaver text ;;
-    if [[ -n $image ]]; then
+  *Image*) omarchy-branding-screensaver image ;;
-      if omarchy-screensaver-logo "$image"; then
+  *Default*) omarchy-branding-screensaver reset ;;
-        echo
+  *) show_style_menu ;;
-        echo "Preview with: omarchy-launch-screensaver force"
+  esac
-      fi
-      echo
-      read -n 1 -s -r -p "Press any key to close..."
-    fi
-  '
 }
 
 show_theme_menu() {
@@ -308,8 +346,8 @@ show_setup_power_menu() {
 
 show_setup_security_menu() {
   case $(menu "Setup" "󰈷  Fingerprint\n  Fido2") in
-  *Fingerprint*) present_terminal omarchy-setup-fingerprint ;;
+  *Fingerprint*) present_terminal omarchy-setup-security-fingerprint ;;
-  *Fido2*) present_terminal omarchy-setup-fido2 ;;
+  *Fido2*) present_terminal omarchy-setup-security-fido2 ;;
   *) show_setup_menu ;;
   esac
 }
@@ -540,7 +578,7 @@ show_install_ai_menu() {
 }
 
 show_install_gaming_menu() {
-  case $(menu "Install" "  Steam\n  RetroArch\n󰍳  Minecraft\n󰢹  NVIDIA GeForce NOW\n  Xbox Cloud Gaming\n󰖺  Xbox Controller (󰂯)\n󰍹  Moonlight (GameStream)\n  Lutris (Battle.net)\n󱓟  Heroic (Epic Games)") in
+  case $(menu "Install" "  Steam\n  RetroArch\n󰍳  Minecraft\n󰢹  NVIDIA GeForce NOW\n  Xbox Cloud Gaming\n󰂯  Xbox Controller\n󰍹  Moonlight (GameStream)\n  Lutris (Battle.net)\n󱓟  Heroic (Epic Games)") in
   *Steam*) present_terminal omarchy-install-gaming-steam ;;
   *RetroArch*) present_terminal omarchy-install-gaming-retroarch ;;
   *Minecraft*) install_and_launch "Minecraft" "minecraft-launcher" "minecraft-launcher" ;;
@@ -622,23 +660,30 @@ show_install_elixir_menu() {
 }
 
 show_remove_menu() {
-  case $(menu "Remove" "󰣇  Package\n  Browser\n  Web App\n  TUI\n󰵮  Development\n  Gaming\n󰏓  Preinstalls\n  Dictation\n󰸌  Theme\n󰍲  Windows\n󰈷  Fingerprint\n  Fido2") in
+  case $(menu "Remove" "󰣇  Package\n  Web App\n  TUI\n󰵮  Development\n󰸌  Theme\n  Browser\n  Dictation\n  Gaming\n󰍲  Windows\n󰏓  Preinstalls\n  Security") in
   *Package*) terminal omarchy-pkg-remove ;;
-  *Browser*) show_remove_browser_menu ;;
   *Web*) present_terminal omarchy-webapp-remove ;;
   *TUI*) present_terminal omarchy-tui-remove ;;
   *Development*) show_remove_development_menu ;;
-  *Gaming*) show_remove_gaming_menu ;;
-  *Preinstalls*) present_terminal omarchy-remove-preinstalls ;;
-  *Dictation*) present_terminal omarchy-voxtype-remove ;;
   *Theme*) present_terminal omarchy-theme-remove ;;
+  *Browser*) show_remove_browser_menu ;;
+  *Dictation*) present_terminal omarchy-voxtype-remove ;;
+  *Gaming*) show_remove_gaming_menu ;;
   *Windows*) present_terminal "omarchy-windows-vm remove" ;;
-  *Fingerprint*) present_terminal "omarchy-setup-fingerprint --remove" ;;
+  *Preinstalls*) present_terminal omarchy-remove-preinstalls ;;
-  *Fido2*) present_terminal "omarchy-setup-fido2 --remove" ;;
+  *Security*) show_remove_security_menu ;;
   *) show_main_menu ;;
   esac
 }
 
+show_remove_security_menu() {
+  case $(menu "Remove" "󰈷  Fingerprint\n  Fido2") in
+  *Fingerprint*) present_terminal omarchy-remove-security-fingerprint ;;
+  *Fido2*) present_terminal omarchy-remove-security-fido2 ;;
+  *) show_remove_menu ;;
+  esac
+}
+
 show_remove_browser_menu() {
   case $(menu "Remove" "  Chrome\n  Edge\n  Brave\n  Brave Origin\n  Firefox\n  Zen") in
   *Chrome*) present_terminal "omarchy-remove-browser chrome" ;;
@@ -815,7 +860,8 @@ go_to_menu() {
   *toggle*) show_toggle_menu ;;
   *hardware*) show_hardware_menu ;;
   *share*) show_share_menu ;;
-  *transcode*) show_transcode_menu ;;
+  *reminder-set*) show_custom_reminder_input ;;
+  *reminder*) show_reminder_menu ;;
   *background*) show_background_menu ;;
   *capture*) show_capture_menu ;;
   *style*) show_style_menu ;;

bin/omarchy-menu-file

@@ -0,0 +1,48 @@
+#!/bin/bash
+
+# omarchy:summary=Pick a file with Walker
+# omarchy:group=menu
+# omarchy:name=file
+# omarchy:args=label paths formats [walker args...]
+# omarchy:examples=omarchy menu file "Select image" "$HOME/Pictures" "jpg png webp"|omarchy-menu-file "Select media" "$HOME/Pictures:$HOME/Videos" "jpg png mp4 mov" --width 800
+
+set -euo pipefail
+
+if (( $# < 3 )); then
+  echo "Usage: omarchy-menu-file <label> <paths> <formats> [walker args...]" >&2
+  exit 1
+fi
+
+label="$1"
+paths_arg="$2"
+formats_arg="$3"
+shift 3
+
+IFS=: read -r -a paths <<<"$paths_arg"
+read -r -a formats <<<"$formats_arg"
+
+if (( ${#paths[@]} == 0 || ${#formats[@]} == 0 )); then
+  echo "Usage: omarchy-menu-file <label> <paths> <formats> [walker args...]" >&2
+  exit 1
+fi
+
+for path in "${paths[@]}"; do
+  [[ -e $path ]] || { echo "Path not found: $path" >&2; exit 1; }
+done
+
+find_args=("${paths[@]}" "(" -type d -name ".*" ! -name "." -prune ")" -o -type f ! -name ".*" "(")
+first_format=true
+for format in "${formats[@]}"; do
+  if [[ $first_format == "true" ]]; then
+    first_format=false
+  else
+    find_args+=(-o)
+  fi
+
+  format="${format#.}"
+  find_args+=(-iname "*.$format")
+done
+find_args+=(")" -printf '%T@\t%p\n')
+
+find "${find_args[@]}" 2>/dev/null | sort -rn | cut -f2- |
+  omarchy-launch-walker --dmenu --width 800 --minheight 1 --maxheight 500 -p "$label…" "$@" 2>/dev/null

bin/omarchy-menu-input

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+# omarchy:summary=Prompt for text input with Walker
+# omarchy:group=menu
+# omarchy:name=input
+# omarchy:args=prompt [walker args...]
+# omarchy:examples=omarchy menu input Reminder|omarchy-menu-input "Reminder in minutes" --width 400
+
+set -euo pipefail
+
+prompt="${1:-Input}"
+if (( $# > 0 )); then
+  shift
+fi
+
+omarchy-launch-walker --dmenu --inputonly --width 295 --minheight 1 --maxheight 1 -p "$prompt…" "$@" 2>/dev/null

bin/omarchy-menu-select

@@ -0,0 +1,38 @@
+#!/bin/bash
+
+# omarchy:summary=Pick one option with Walker
+# omarchy:group=menu
+# omarchy:name=select
+# omarchy:args=prompt option... [-- walker args...]
+# omarchy:examples=omarchy menu select Format jpg png|omarchy-menu-select Resolution 4k 1080p 720p -- --width 400
+
+set -euo pipefail
+
+if (( $# < 2 )); then
+  echo "Usage: omarchy-menu-select <prompt> <option>... [-- walker args...]" >&2
+  exit 1
+fi
+
+prompt="$1"
+shift
+
+options=()
+walker_args=()
+
+while (( $# > 0 )); do
+  if [[ $1 == "--" ]]; then
+    shift
+    walker_args=("$@")
+    break
+  fi
+
+  options+=("$1")
+  shift
+done
+
+if (( ${#options[@]} == 0 )); then
+  echo "Usage: omarchy-menu-select <prompt> <option>... [-- walker args...]" >&2
+  exit 1
+fi
+
+printf '%s\n' "${options[@]}" | omarchy-launch-walker --dmenu --width 295 --minheight 1 --maxheight 300 -p "$prompt…" "${walker_args[@]}" 2>/dev/null

bin/omarchy-notification-send

@@ -0,0 +1,32 @@
+#!/bin/bash
+
+# omarchy:summary=Send a desktop notification with Omarchy glyph and body spacing
+# omarchy:args=<glyph> <headline> [description] [notify-send options]
+# omarchy:examples=omarchy notification send "󰔛" "Reminder" "5 minutes are up" -u critical
+
+set -euo pipefail
+
+if (($# < 2)); then
+  echo "Usage: omarchy-notification-send <glyph> <headline> [description] [notify-send options]"
+  exit 1
+fi
+
+glyph=$1
+headline=$2
+description=${3:-}
+shift 2
+
+if (($# > 0)) && [[ $1 != -* ]]; then
+  shift
+else
+  description=""
+fi
+
+summary="$glyph    $headline"
+
+if [[ -n $description ]]; then
+  description=$(sed 's/^/      /' <<<"$description")
+  notify-send "$@" "$summary" "$description"
+else
+  notify-send "$@" "$summary"
+fi

bin/omarchy-reminder

@@ -0,0 +1,139 @@
+#!/bin/bash
+
+# omarchy:summary=Set and show lightweight desktop notification reminders
+# omarchy:args=<minutes> [message] | show | clear
+# omarchy:examples=omarchy reminder 5 | omarchy reminder 30 "Check the oven" | omarchy reminder show | omarchy reminder clear
+
+set -euo pipefail
+
+format_remaining() {
+  local seconds=$1
+  local minutes=$((seconds / 60))
+  local remainder=$((seconds % 60))
+
+  if ((minutes > 0 && remainder > 0)); then
+    echo "${minutes}m ${remainder}s"
+  elif ((minutes > 0)); then
+    echo "${minutes}m"
+  else
+    echo "${remainder}s"
+  fi
+}
+
+parse_systemd_timespan() {
+  local timespan="$1"
+  local total=0
+  local value unit whole
+
+  while read -r value unit; do
+    whole=${value%.*}
+
+    case $unit in
+    d) total=$((total + whole * 86400)) ;;
+    h) total=$((total + whole * 3600)) ;;
+    min) total=$((total + whole * 60)) ;;
+    s) total=$((total + whole)) ;;
+    ms | us) ;;
+    esac
+  done < <(grep -oE '[0-9]+([.][0-9]+)?(d|h|min|s|ms|us)' <<<"$timespan" | sed -E 's/^([0-9.]+)([a-z]+)$/\1 \2/')
+
+  echo "$total"
+}
+
+show_reminders() {
+  local timers timer next next_seconds uptime remaining body=""
+  local reminder_dir="${XDG_RUNTIME_DIR:-/tmp}/omarchy-reminders"
+  local reminder_message=""
+
+  timers=$(systemctl --user list-timers --all --no-legend --no-pager "omarchy-reminder-*.timer" 2>/dev/null | awk '{ print $(NF - 1) }')
+  uptime=${SECONDS_SINCE_BOOT:-$(awk '{ print int($1) }' /proc/uptime)}
+
+  for timer in $timers; do
+    next=$(systemctl --user show -P NextElapseUSecMonotonic "$timer" 2>/dev/null || true)
+    [[ -z $next ]] && continue
+
+    next_seconds=$(parse_systemd_timespan "$next")
+    ((next_seconds <= uptime)) && continue
+
+    remaining=$((next_seconds - uptime))
+    reminder=${timer%.timer}
+    reminder=${reminder#omarchy-reminder-}
+    set_at=${reminder##*-}
+    reminder_minutes=${reminder%%m-*}
+    reminder_message=""
+    [[ -f $reminder_dir/${timer%.timer}.message ]] && reminder_message=$(<"$reminder_dir/${timer%.timer}.message")
+
+    if [[ -n $reminder_message ]]; then
+      body+="$reminder_message in $(format_remaining $remaining) ($(date -d "@$((set_at + reminder_minutes * 60))" +%-H:%M))"$'\n'
+    else
+      body+="${reminder_minutes}-min reminder in $(format_remaining $remaining) ($(date -d "@$((set_at + reminder_minutes * 60))" +%-H:%M))"$'\n'
+    fi
+  done
+
+  if [[ -z $body ]]; then
+    omarchy-notification-send "󰔛" "Upcoming reminders" "No outstanding reminders" -u low
+  else
+    omarchy-notification-send "󰔛" "Upcoming reminders" "${body%$'\n'}" -u low
+  fi
+}
+
+clear_reminders() {
+  local units
+  local reminder_dir="${XDG_RUNTIME_DIR:-/tmp}/omarchy-reminders"
+
+  units=$(systemctl --user list-timers --all --no-legend --no-pager "omarchy-reminder-*.timer" 2>/dev/null | awk '{ print $(NF - 1), $NF }')
+
+  if [[ -n $units ]]; then
+    xargs -r systemctl --user stop <<<"$units" || true
+  fi
+
+  rm -f "$reminder_dir"/omarchy-reminder-*.message 2>/dev/null || true
+  omarchy-notification-send "󰔛" "All reminders have been cleared" -u low
+}
+
+case ${1:-} in
+show | list)
+  show_reminders
+  exit 0
+  ;;
+clear)
+  clear_reminders
+  exit 0
+  ;;
+esac
+
+minutes=${1:-}
+shift || true
+message="$*"
+custom_message="$message"
+
+if [[ -z $minutes ]] || [[ ! $minutes =~ ^[0-9]+$ ]] || ((minutes == 0)); then
+  echo "Usage: omarchy-reminder <minutes> [message]"
+  echo "       omarchy-reminder show"
+  echo "       omarchy-reminder clear"
+  exit 1
+fi
+
+if [[ -z $message ]]; then
+  message="Your ${minutes} minutes are up"
+fi
+
+set_at=$(date +%s)
+remind_at=$(date -d "+${minutes} minutes" +%H:%M)
+unit="omarchy-reminder-${minutes}m-$set_at"
+reminder_dir="${XDG_RUNTIME_DIR:-/tmp}/omarchy-reminders"
+message_file="$reminder_dir/$unit.message"
+confirmation="You'll be reminded at $remind_at"
+confirmation_title="Reminder set for ${minutes} minutes"
+
+mkdir -p "$reminder_dir"
+
+if [[ -n $custom_message ]]; then
+  printf "%s" "$custom_message" >"$message_file"
+  confirmation_title="$custom_message in ${minutes} minutes"
+fi
+
+systemd-run --user --quiet --collect --on-active="${minutes}m" --unit="$unit" \
+  bash -c 'omarchy-notification-send "󰔛" "Reminder" "$1" -u critical; rm -f "$2"' bash "$message" "$message_file"
+
+omarchy-notification-send "󰔛" "$confirmation_title" "$confirmation" -u low

bin/omarchy-remove-security-fido2

@@ -0,0 +1,35 @@
+#!/bin/bash
+
+# omarchy:summary=Remove FIDO2 authentication from sudo and polkit
+# omarchy:requires-sudo=true
+
+set -e
+
+
+remove_pam_config() {
+  # Remove from sudo
+  if grep -q pam_u2f.so /etc/pam.d/sudo; then
+    echo "Removing FIDO2 authentication from sudo..."
+    sudo sed -i '/pam_u2f\.so/d' /etc/pam.d/sudo
+  fi
+
+  # Remove from polkit
+  if [[ -f /etc/pam.d/polkit-1 ]] && grep -Fq 'pam_u2f.so' /etc/pam.d/polkit-1; then
+    echo "Removing FIDO2 authentication from polkit..."
+    sudo sed -i '/pam_u2f\.so/d' /etc/pam.d/polkit-1
+  fi
+}
+
+echo -e "\e[32mRemoving FIDO2 device from authentication.\n\e[0m"
+
+remove_pam_config
+
+if [[ -d /etc/fido2 ]]; then
+  echo "Removing FIDO2 configuration..."
+  sudo rm -rf /etc/fido2
+fi
+
+echo "Removing FIDO2 packages..."
+omarchy-pkg-drop libfido2 pam-u2f
+
+echo -e "\e[32mFIDO2 authentication has been completely removed.\e[0m"

bin/omarchy-remove-security-fingerprint

@@ -0,0 +1,37 @@
+#!/bin/bash
+
+# omarchy:summary=Remove fingerprint authentication from sudo, polkit, and lock screen
+# omarchy:requires-sudo=true
+
+set -e
+
+
+remove_pam_config() {
+  # Remove from sudo
+  if grep -q pam_fprintd.so /etc/pam.d/sudo; then
+    echo "Removing fingerprint authentication from sudo..."
+    sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/sudo
+  fi
+
+  # Remove from polkit
+  if [[ -f /etc/pam.d/polkit-1 ]] && grep -Fq 'pam_fprintd.so' /etc/pam.d/polkit-1; then
+    echo "Removing fingerprint authentication from polkit..."
+    sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/polkit-1
+  fi
+}
+
+remove_hyprlock_fingerprint_icon() {
+  echo "Removing fingerprint icon from hyprlock placeholder text..."
+  sed -i 's/placeholder_text = .*/placeholder_text = Enter Password/' ~/.config/hypr/hyprlock.conf
+  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = false/' ~/.config/hypr/hyprlock.conf
+}
+
+echo -e "\e[32mRemoving fingerprint scanner from authentication.\n\e[0m"
+
+remove_pam_config
+remove_hyprlock_fingerprint_icon
+
+echo "Removing fingerprint packages..."
+omarchy-pkg-drop fprintd libfprint-git
+
+echo -e "\e[32mFingerprint authentication has been completely removed.\e[0m"

bin/omarchy-restart-swayosd

@@ -2,4 +2,8 @@
 
 # omarchy:summary=Restart the SwayOSD server
 
-omarchy-restart-app swayosd-server
+systemctl --user daemon-reload
+systemctl --user stop swayosd-server.service || true
+pkill -x swayosd-server || true
+systemctl --user reset-failed swayosd-server.service || true
+systemctl --user enable --now swayosd-server.service

bin/omarchy-setup-fido2

@@ -1,131 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Set up or remove FIDO2 authentication for sudo and polkit
-# omarchy:args=[--remove]
-# omarchy:requires-sudo=true
-
-set -e
-
-GREEN='\033[0;32m'
-RED='\033[0;31m'
-YELLOW='\033[1;33m'
-NC='\033[0m' # No Color
-
-print_success() {
-  echo -e "${GREEN}$1${NC}"
-}
-
-print_error() {
-  echo -e "${RED}$1${NC}"
-}
-
-print_info() {
-  echo -e "${YELLOW}$1${NC}"
-}
-
-check_fido2_hardware() {
-  tokens=$(fido2-token -L 2>/dev/null)
-  if [[ -z $tokens ]]; then
-    print_error "\nNo FIDO2 device detected. Please plug it in (you may need to unlock it as well)."
-    return 1
-  fi
-  return 0
-}
-
-setup_pam_config() {
-  # Configure sudo
-  if ! grep -q pam_u2f.so /etc/pam.d/sudo; then
-    print_info "Configuring sudo for FIDO2 authentication..."
-    sudo sed -i '1i auth    sufficient pam_u2f.so cue authfile=/etc/fido2/fido2' /etc/pam.d/sudo
-  fi
-
-  # Configure polkit
-  if [[ -f /etc/pam.d/polkit-1 ]] && ! grep -q 'pam_u2f.so' /etc/pam.d/polkit-1; then
-    print_info "Configuring polkit for FIDO2 authentication..."
-    sudo sed -i '1i auth      sufficient pam_u2f.so cue authfile=/etc/fido2/fido2' /etc/pam.d/polkit-1
-  elif [[ ! -f /etc/pam.d/polkit-1 ]]; then
-    print_info "Creating polkit configuration with FIDO2 authentication..."
-    sudo tee /etc/pam.d/polkit-1 >/dev/null <<'EOF'
-auth      sufficient pam_u2f.so cue authfile=/etc/fido2/fido2
-auth      required pam_unix.so
-
-account   required pam_unix.so
-password  required pam_unix.so
-session   required pam_unix.so
-EOF
-  fi
-}
-
-remove_pam_config() {
-  # Remove from sudo
-  if grep -q pam_u2f.so /etc/pam.d/sudo; then
-    print_info "Removing FIDO2 authentication from sudo..."
-    sudo sed -i '/pam_u2f\.so/d' /etc/pam.d/sudo
-  fi
-
-  # Remove from polkit
-  if [[ -f /etc/pam.d/polkit-1 ]] && grep -Fq 'pam_u2f.so' /etc/pam.d/polkit-1; then
-    print_info "Removing FIDO2 authentication from polkit..."
-    sudo sed -i '/pam_u2f\.so/d' /etc/pam.d/polkit-1
-  fi
-}
-
-if [[ "--remove" == $1 ]]; then
-  print_success "Removing FIDO2 device from authentication.\n"
-
-  # Remove PAM configuration
-  remove_pam_config
-
-  # Remove FIDO2 configuration
-  if [[ -d /etc/fido2 ]]; then
-    print_info "Removing FIDO2 configuration..."
-    sudo rm -rf /etc/fido2
-  fi
-
-  # Uninstall packages
-  print_info "Removing FIDO2 packages..."
-  sudo pacman -Rns --noconfirm libfido2 pam-u2f
-
-  print_success "FIDO2 authentication has been completely removed."
-else
-  print_success "Setting up FIDO2 device for authentication.\n"
-
-  # Install required packages
-  print_info "Installing required packages..."
-  omarchy-pkg-add libfido2 pam-u2f
-
-  if ! check_fido2_hardware; then
-    exit 1
-  fi
-
-  # Create the pamu2fcfg file
-  if [[ ! -f /etc/fido2/fido2 ]]; then
-    sudo mkdir -p /etc/fido2
-    print_success "\nLet's setup your device by confirming on the device now."
-    print_info "Touch your FIDO2 key when it lights up...\n"
-
-    if pamu2fcfg >/tmp/fido2; then
-      sudo mv /tmp/fido2 /etc/fido2/fido2
-      print_success "FIDO2 device registered successfully!"
-    else
-      print_error "\nFIDO2 registration failed. Please try again."
-      exit 1
-    fi
-  else
-    print_info "FIDO2 device already registered."
-  fi
-
-  # Configure PAM
-  setup_pam_config
-
-  # Test with sudo
-  print_info "\nTesting FIDO2 authentication with sudo..."
-  print_info "Touch your FIDO2 key when prompted.\n"
-
-  if sudo echo "FIDO2 authentication test successful"; then
-    print_success "\nPerfect! FIDO2 authentication is now configured."
-    print_info "You can use your FIDO2 key for sudo and polkit authentication."
-  else
-    print_error "\nVerification failed. You may want to check your configuration."
-  fi
-fi

bin/omarchy-setup-fingerprint

@@ -1,161 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Set up or remove fingerprint authentication for sudo, polkit, and lock screen
-# omarchy:args=[--remove]
-# omarchy:requires-sudo=true
-
-set -e
-
-GREEN='\033[0;32m'
-RED='\033[0;31m'
-YELLOW='\033[1;33m'
-NC='\033[0m' # No Color
-
-print_success() {
-  echo -e "${GREEN}$1${NC}"
-}
-
-print_error() {
-  echo -e "${RED}$1${NC}"
-}
-
-print_info() {
-  echo -e "${YELLOW}$1${NC}"
-}
-
-check_fingerprint_hardware() {
-  # Get fingerprint devices for the user
-  devices=$(fprintd-list "$USER" 2>/dev/null)
-
-  # Exit if no devices found
-  if [[ -z $devices ]]; then
-    print_error "\nNo fingerprint sensor detected."
-    return 1
-  fi
-  return 0
-}
-
-setup_pam_config() {
-  # Configure sudo
-  if ! grep -q pam_fprintd.so /etc/pam.d/sudo; then
-    print_info "Configuring sudo for fingerprint authentication..."
-    sudo sed -i '1i auth    sufficient pam_fprintd.so' /etc/pam.d/sudo
-  fi
-
-  # Configure polkit
-  if [[ -f /etc/pam.d/polkit-1 ]] && ! grep -q 'pam_fprintd.so' /etc/pam.d/polkit-1; then
-    print_info "Configuring polkit for fingerprint authentication..."
-    sudo sed -i '1i auth      sufficient pam_fprintd.so' /etc/pam.d/polkit-1
-  elif [[ ! -f /etc/pam.d/polkit-1 ]]; then
-    print_info "Creating polkit configuration with fingerprint authentication..."
-    sudo tee /etc/pam.d/polkit-1 >/dev/null <<'EOF'
-auth      sufficient pam_fprintd.so
-auth      required pam_unix.so
-
-account   required pam_unix.so
-password  required pam_unix.so
-session   required pam_unix.so
-EOF
-  fi
-}
-
-add_hyprlock_fingerprint_icon() {
-  print_info "Adding fingerprint icon to hyprlock placeholder text..."
-  sed -i 's/placeholder_text = .*/placeholder_text = <span> Enter Password 󰈷 <\/span>/' ~/.config/hypr/hyprlock.conf
-  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = true/' ~/.config/hypr/hyprlock.conf
-}
-
-remove_hyprlock_fingerprint_icon() {
-  print_info "Removing fingerprint icon from hyprlock placeholder text..."
-  sed -i 's/placeholder_text = .*/placeholder_text = Enter Password/' ~/.config/hypr/hyprlock.conf
-  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = false/' ~/.config/hypr/hyprlock.conf
-}
-
-remove_pam_config() {
-  # Remove from sudo
-  if grep -q pam_fprintd.so /etc/pam.d/sudo; then
-    print_info "Removing fingerprint authentication from sudo..."
-    sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/sudo
-  fi
-
-  # Remove from polkit
-  if [[ -f /etc/pam.d/polkit-1 ]] && grep -Fq 'pam_fprintd.so' /etc/pam.d/polkit-1; then
-    print_info "Removing fingerprint authentication from polkit..."
-    sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/polkit-1
-  fi
-}
-
-if [[ "--remove" == $1 ]]; then
-  print_success "Removing fingerprint scanner from authentication.\n"
-
-  # Remove PAM configuration
-  remove_pam_config
-
-  # Remove fingerprint icon from hyprlock placeholder text
-  remove_hyprlock_fingerprint_icon
-
-  # Uninstall packages
-  print_info "Removing fingerprint packages..."
-  sudo pacman -Rns --noconfirm fprintd
-
-  print_success "Fingerprint authentication has been completely removed."
-else
-  print_success "Setting up fingerprint scanner for authentication.\n"
-
-  # Install required packages
-  print_info "Installing required packages..."
-
-  # ASUS ExpertBook B9406CAA ships a FocalTech FT9349 ESS reader (USB
-  # 2808:a97a). Mainline libfprint at 1.94.x lacks the focaltech_moc
-  # driver (and its 0xa97a id_table entry); OPR ships libfprint-git
-  # which carries both. Once upstream catches up, this branch is a
-  # no-op and `libfprint-git` provides=libfprint anyway. Detect via
-  # /sys to avoid depending on usbutils being installed first.
-  for v in /sys/bus/usb/devices/*/idVendor; do
-    [[ "$(cat "$v" 2>/dev/null)" == "2808" ]] || continue
-    [[ "$(cat "${v%idVendor}idProduct" 2>/dev/null)" == "a97a" ]] || continue
-    print_info "FocalTech FT9349 detected (B9406CAA) — using libfprint-git from OPR..."
-    # libfprint-git provides+conflicts libfprint; pacman -S --noconfirm
-    # defaults the conflict prompt to N and aborts. Pre-remove libfprint
-    # with -Rdd so the install goes silent. -Rdd (not omarchy-pkg-drop's
-    # -Rns) is required because fprintd requires libfprint; the dep is
-    # re-satisfied immediately by libfprint-git's provides=libfprint.
-    if omarchy-pkg-present libfprint; then
-      sudo pacman -Rdd --noconfirm libfprint
-    fi
-    omarchy-pkg-add libfprint-git
-    break
-  done
-
-  omarchy-pkg-add fprintd usbutils
-
-  if ! check_fingerprint_hardware; then
-    exit 1
-  fi
-
-  # Configure PAM
-  setup_pam_config
-
-  # Add fingerprint icon to hyprlock placeholder text
-  add_hyprlock_fingerprint_icon
-
-  # Enroll first fingerprint
-  print_success "\nLet's setup your right index finger as the first fingerprint."
-  print_info "Keep moving the finger around on sensor until the process completes.\n"
-
-  if sudo fprintd-enroll "$USER"; then
-    print_success "\nFingerprint enrolled successfully!"
-
-    # Verify
-    print_info "\nNow let's verify that it's working correctly.\n"
-    if fprintd-verify; then
-      print_success "\nPerfect! Fingerprint authentication is now configured."
-      print_info "You can use your fingerprint for sudo, polkit, and lock screen (Super + Escape)."
-    else
-      print_error "\nVerification failed. You may want to try enrolling again."
-    fi
-  else
-    print_error "\nEnrollment failed. Please try again."
-    exit 1
-  fi
-fi

bin/omarchy-setup-security-fido2

@@ -0,0 +1,81 @@
+#!/bin/bash
+
+# omarchy:summary=Set up FIDO2 authentication for sudo and polkit
+# omarchy:requires-sudo=true
+
+set -e
+
+
+check_fido2_hardware() {
+  tokens=$(fido2-token -L 2>/dev/null)
+  if [[ -z $tokens ]]; then
+    echo -e "\e[31m\nNo FIDO2 device detected. Please plug it in (you may need to unlock it as well).\e[0m"
+    return 1
+  fi
+  return 0
+}
+
+setup_pam_config() {
+  # Configure sudo
+  if ! grep -q pam_u2f.so /etc/pam.d/sudo; then
+    echo "Configuring sudo for FIDO2 authentication..."
+    sudo sed -i '1i auth    sufficient pam_u2f.so cue authfile=/etc/fido2/fido2' /etc/pam.d/sudo
+  fi
+
+  # Configure polkit
+  if [[ -f /etc/pam.d/polkit-1 ]] && ! grep -q 'pam_u2f.so' /etc/pam.d/polkit-1; then
+    echo "Configuring polkit for FIDO2 authentication..."
+    sudo sed -i '1i auth      sufficient pam_u2f.so cue authfile=/etc/fido2/fido2' /etc/pam.d/polkit-1
+  elif [[ ! -f /etc/pam.d/polkit-1 ]]; then
+    echo "Creating polkit configuration with FIDO2 authentication..."
+    sudo tee /etc/pam.d/polkit-1 >/dev/null <<'EOF'
+auth      sufficient pam_u2f.so cue authfile=/etc/fido2/fido2
+auth      required pam_unix.so
+
+account   required pam_unix.so
+password  required pam_unix.so
+session   required pam_unix.so
+EOF
+  fi
+}
+
+echo -e "\e[32mSetting up FIDO2 device for authentication.\n\e[0m"
+
+# Install required packages
+echo "Installing required packages..."
+omarchy-pkg-add libfido2 pam-u2f
+
+if ! check_fido2_hardware; then
+  exit 1
+fi
+
+# Create the pamu2fcfg file
+if [[ ! -f /etc/fido2/fido2 ]]; then
+  sudo mkdir -p /etc/fido2
+  echo -e "\e[32m\nLet's setup your device by confirming on the device now.\e[0m"
+  echo -e "Touch your FIDO2 key when it lights up...\n"
+
+  if pamu2fcfg >/tmp/fido2; then
+    sudo mv /tmp/fido2 /etc/fido2/fido2
+    echo -e "\e[32mFIDO2 device registered successfully!\e[0m"
+  else
+    echo -e "\e[31m\nFIDO2 registration failed. Please try again.\e[0m"
+    exit 1
+  fi
+else
+  echo "FIDO2 device already registered."
+fi
+
+# Configure PAM
+setup_pam_config
+
+# Test with sudo
+echo -e "\nTesting FIDO2 authentication with sudo..."
+echo -e "Touch your FIDO2 key when prompted.\n"
+
+if sudo echo "FIDO2 authentication test successful"; then
+  echo -e "\e[32m\nPerfect! FIDO2 authentication is now configured.\e[0m"
+  echo "You can use your FIDO2 key for sudo and polkit authentication."
+else
+  echo -e "\e[31m\nVerification failed. You may want to check your configuration.\e[0m"
+fi

bin/omarchy-setup-security-fingerprint

@@ -0,0 +1,95 @@
+#!/bin/bash
+
+# omarchy:summary=Set up fingerprint authentication for sudo, polkit, and lock screen
+# omarchy:requires-sudo=true
+
+set -e
+
+
+check_fingerprint_hardware() {
+  # Get fingerprint devices for the user
+  devices=$(fprintd-list "$USER" 2>/dev/null)
+
+  # Exit if no devices found
+  if [[ -z $devices ]]; then
+    echo -e "\e[31m\nNo fingerprint sensor detected.\e[0m"
+    return 1
+  fi
+  return 0
+}
+
+setup_pam_config() {
+  # Configure sudo
+  if ! grep -q pam_fprintd.so /etc/pam.d/sudo; then
+    echo "Configuring sudo for fingerprint authentication..."
+    sudo sed -i '1i auth    sufficient pam_fprintd.so' /etc/pam.d/sudo
+  fi
+
+  # Configure polkit
+  if [[ -f /etc/pam.d/polkit-1 ]] && ! grep -q 'pam_fprintd.so' /etc/pam.d/polkit-1; then
+    echo "Configuring polkit for fingerprint authentication..."
+    sudo sed -i '1i auth      sufficient pam_fprintd.so' /etc/pam.d/polkit-1
+  elif [[ ! -f /etc/pam.d/polkit-1 ]]; then
+    echo "Creating polkit configuration with fingerprint authentication..."
+    sudo tee /etc/pam.d/polkit-1 >/dev/null <<'EOF'
+auth      sufficient pam_fprintd.so
+auth      required pam_unix.so
+
+account   required pam_unix.so
+password  required pam_unix.so
+session   required pam_unix.so
+EOF
+  fi
+}
+
+add_hyprlock_fingerprint_icon() {
+  echo "Adding fingerprint icon to hyprlock placeholder text..."
+  sed -i 's/placeholder_text = .*/placeholder_text = <span> Enter Password 󰈷 <\/span>/' ~/.config/hypr/hyprlock.conf
+  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = true/' ~/.config/hypr/hyprlock.conf
+}
+
+echo -e "\e[32mSetting up fingerprint scanner for authentication.\n\e[0m"
+
+# Install required packages
+echo "Installing required packages..."
+
+# libfprint-git provides+conflicts libfprint; pacman -S --noconfirm
+# defaults the conflict prompt to N and aborts. Pre-remove libfprint
+# with -Rdd so the install goes silent. -Rdd (not omarchy-pkg-drop's
+# -Rns) is required because fprintd requires libfprint; the dep is
+# re-satisfied immediately by libfprint-git's provides=libfprint.
+if omarchy-pkg-present libfprint; then
+  sudo pacman -Rdd --noconfirm libfprint
+fi
+
+omarchy-pkg-add libfprint-git fprintd usbutils
+
+if ! check_fingerprint_hardware; then
+  exit 1
+fi
+
+# Configure PAM
+setup_pam_config
+
+# Add fingerprint icon to hyprlock placeholder text
+add_hyprlock_fingerprint_icon
+
+# Enroll first fingerprint
+echo -e "\e[32m\nLet's setup your right index finger as the first fingerprint.\e[0m"
+echo -e "Keep moving the finger around on sensor until the process completes.\n"
+
+if sudo fprintd-enroll "$USER"; then
+  echo -e "\e[32m\nFingerprint enrolled successfully!\e[0m"
+
+  # Verify
+  echo -e "\nNow let's verify that it's working correctly.\n"
+  if fprintd-verify; then
+    echo -e "\e[32m\nPerfect! Fingerprint authentication is now configured.\e[0m"
+    echo "You can use your fingerprint for sudo, polkit, and lock screen (Super + Escape)."
+  else
+    echo -e "\e[31m\nVerification failed. You may want to try enrolling again.\e[0m"
+  fi
+else
+  echo -e "\e[31m\nEnrollment failed. Please try again.\e[0m"
+  exit 1
+fi

bin/omarchy-transcode

@@ -13,7 +13,7 @@ usage() {
 Usage:
   omarchy transcode [--path path] [input] [format] [resolution]
 
-With no input, fuzzy-pick a picture or video from ~/Pictures and ~/Videos,
+With no input, pick a picture or video with Walker from ~/Pictures and ~/Videos,
 or only from --path when provided. Then pick the output format and resolution.
 
 Options:
@@ -29,30 +29,6 @@ Resolutions:
 EOF
 }
 
-pick_file() {
-  local search_path="$1"
-  local paths=()
-
-  if [[ -n $search_path ]]; then
-    [[ -e $search_path ]] || { echo "Path not found: $search_path" >&2; return 1; }
-    paths=("$search_path")
-  else
-    paths=("$HOME/Pictures" "$HOME/Videos")
-  fi
-
-  find "${paths[@]}" -type f \
-    \( -iname '*.jpg' -o -iname '*.jpeg' -o -iname '*.png' -o -iname '*.webp' -o -iname '*.gif' -o -iname '*.heic' -o -iname '*.avif' \
-    -o -iname '*.mp4' -o -iname '*.mov' -o -iname '*.m4v' -o -iname '*.mkv' -o -iname '*.webm' -o -iname '*.avi' \) \
-    -printf '%T@\t%p\n' 2>/dev/null | sort -rn | cut -f2- | fzf --layout=reverse-list --prompt="Transcode file> "
-}
-
-pick_option() {
-  local prompt="$1"
-  shift
-
-  gum choose --header "$prompt" "$@"
-}
-
 media_type() {
   local mime
   mime=$(file -b --mime-type "$1")
@@ -187,9 +163,10 @@ main() {
   input="${positional[0]:-}"
   format="${positional[1]:-}"
   resolution="${positional[2]:-}"
+  search_path="${search_path:-$HOME/Pictures:$HOME/Videos}"
 
   if [[ -z $input ]]; then
-    input=$(pick_file "$search_path")
+    input=$(omarchy-menu-file "Transcode picture or video" "$search_path" "jpg jpeg png webp gif heic avif mp4 mov m4v mkv webm avi")
   fi
 
   [[ -n $input ]] || return 1
@@ -199,33 +176,32 @@ main() {
 
   if [[ -z $format ]]; then
     if [[ $type == "picture" ]]; then
-      format=$(pick_option "Select format..." jpg png)
+      format=$(omarchy-menu-select "Select format" jpg png)
     else
-      format=$(pick_option "Select format..." mp4 gif)
+      format=$(omarchy-menu-select "Select format" mp4 gif)
     fi
   fi
 
   if [[ -z $resolution ]]; then
     if [[ $type == "picture" ]]; then
-      resolution=$(pick_option "Select resolution..." high medium low)
+      resolution=$(omarchy-menu-select "Select resolution" high medium low)
     else
-      resolution=$(pick_option "Select resolution..." 4k 1080p 720p)
+      resolution=$(omarchy-menu-select "Select resolution" 4k 1080p 720p)
     fi
   fi
 
   output=$(output_path "$input" "$format" "$resolution")
 
-  if [[ $type == "picture" ]]; then
+  if [[ $type == "video" ]]; then
-    transcode_picture "$input" "$format" "$resolution" "$output"
+    omarchy-notification-send "" "Transcoding video…" "$(basename -- "$input") to $format ($resolution)"
-  else
     transcode_video "$input" "$format" "$resolution" "$output"
-    echo ""
+    copy_to_clipboard "$output"
+    omarchy-notification-send "" "Transcoded to $resolution $format" "Saved and copied to clipboard."
+  else
+    transcode_picture "$input" "$format" "$resolution" "$output"
+    copy_to_clipboard "$output"
+    omarchy-notification-send "" "Transcoded to $resolution $format" "Saved and copied to clipboard."
   fi
-
-  copy_to_clipboard "$output"
-  echo "Your $type has been transcoded into $format as $resolution. It's on your clipboard."
-  echo ""
-  echo "It's also in $output"
 }
 
 main "$@"

bin/omarchy-transcode-ascii

@@ -1,18 +1,18 @@
 #!/bin/bash
 
-# omarchy:summary=Set the screensaver logo text from an SVG/PNG or the default
+# omarchy:summary=Transcode an image into ASCII/Unicode art text
-# omarchy:args=<default|path-to-logo.svg|png> [--width <columns>] [--height <rows>] [--mode <braille|block>] [--threshold <percent>] [--invert] [--stdout]
+# omarchy:group=transcode
-# omarchy:examples=omarchy screensaver logo ~/logo.svg | omarchy screensaver logo default | omarchy screensaver logo ~/logo.png --width 80 --mode block --stdout
+# omarchy:name=ascii
+# omarchy:args=<input-image.svg|png> <output-path> [--width <columns>] [--height <rows>] [--mode <braille|block>] [--threshold <percent>] [--invert]
+# omarchy:examples=omarchy transcode ascii ~/logo.svg /tmp/logo.txt | omarchy transcode ascii ~/logo.png ~/.config/omarchy/branding/screensaver.txt --width 80
 
 set -o pipefail
 
 usage() {
   cat <<'EOF'
-Usage: omarchy-screensaver-logo <default|path-to-logo.svg|png> [options]
+Usage: omarchy-transcode-ascii <input-image.svg|png> <output-path> [options]
 
-Sets the screensaver logo text from an image.
+Transcodes an image into ASCII/Unicode art text.
-Pass "default" instead of an image path to restore the Omarchy default.
-By default, writes to ~/.config/omarchy/branding/screensaver.txt.
 
 Options:
   -w, --width <columns>       Maximum output width in terminal columns (default: 80)
@@ -21,7 +21,6 @@ Options:
   -t, --threshold <percent>   Pixel threshold from 0-100 (default: 50)
       --invert                Treat light pixels as the logo instead of dark pixels
       --no-trim               Preserve surrounding whitespace/background
-      --stdout                Print converted text instead of writing the screensaver file
       --help                  Show this help
 EOF
 }
@@ -32,9 +31,8 @@ mode=braille
 threshold=50
 invert=false
 trim=true
-output_path="$HOME/.config/omarchy/branding/screensaver.txt"
 image_path=""
-reset_default=false
+output_path=""
 
 while (($# > 0)); do
   case "$1" in
@@ -98,9 +96,6 @@ while (($# > 0)); do
   --no-trim)
     trim=false
     ;;
-  --stdout)
-    output_path="-"
-    ;;
   --)
     shift
     break
@@ -111,10 +106,10 @@ while (($# > 0)); do
     exit 1
     ;;
   *)
-    if [[ $1 == "default" && -z $image_path ]]; then
+    if [[ -z $image_path ]]; then
-      reset_default=true
-    elif [[ -z $image_path ]]; then
       image_path="$1"
+    elif [[ -z $output_path ]]; then
+      output_path="$1"
     else
       echo "Unexpected argument: $1" >&2
       usage >&2
@@ -127,10 +122,10 @@ done
 
 if (($# > 0)); then
   while (($# > 0)); do
-    if [[ $1 == "default" && -z $image_path ]]; then
+    if [[ -z $image_path ]]; then
-      reset_default=true
-    elif [[ -z $image_path ]]; then
       image_path="$1"
+    elif [[ -z $output_path ]]; then
+      output_path="$1"
     else
       echo "Unexpected argument: $1" >&2
       usage >&2
@@ -140,29 +135,7 @@ if (($# > 0)); then
   done
 fi
 
-if [[ $reset_default == "true" ]]; then
+if [[ -z $image_path || -z $output_path ]]; then
-  if [[ -n $image_path ]]; then
-    echo "default does not accept an image path" >&2
-    exit 1
-  fi
-
-  default_path="${OMARCHY_PATH:-$HOME/.local/share/omarchy}/logo.txt"
-  if [[ ! -f $default_path ]]; then
-    echo "Default screensaver logo text not found: $default_path" >&2
-    exit 1
-  fi
-
-  if [[ $output_path == "-" ]]; then
-    cat "$default_path"
-  else
-    mkdir -p "$(dirname "$output_path")"
-    cp "$default_path" "$output_path"
-    echo "Restored default screensaver logo text to $output_path"
-  fi
-  exit 0
-fi
-
-if [[ -z $image_path ]]; then
   usage >&2
   exit 1
 fi
@@ -375,10 +348,6 @@ if [[ ! -s $tmp_output ]]; then
   exit 1
 fi
 
-if [[ $output_path == "-" ]]; then
+mkdir -p "$(dirname "$output_path")"
-  cat "$tmp_output"
+cp "$tmp_output" "$output_path"
-else
+echo "Wrote ASCII art to $output_path"
-  mkdir -p "$(dirname "$output_path")"
-  cp "$tmp_output" "$output_path"
-  echo "Wrote screensaver logo text to $output_path"
-fi

bin/omarchy-update-keyring

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# omarchy:summary=Ensure the Omarchy keyring package is installed and populated
+# omarchy:summary=Ensure the Omarchy and Arch keyring packages are installed and populated
 # omarchy:requires-sudo=true
 
 if omarchy-pkg-missing omarchy-keyring || ! sudo pacman-key --list-keys 40DFB630FF42BCFFB047046CF0134EE680CAC571 &>/dev/null; then
@@ -16,5 +16,7 @@ if omarchy-pkg-missing omarchy-keyring || ! sudo pacman-key --list-keys 40DFB630
 fi
 
 # Ensure we have the latest archlinux-keyring, maintainer keys might have changed
+# Always reinstall, as the keyring can be updated without a package version bump.
 echo -e "\e[32m\nUpdate Arch signing keys\e[0m"
-sudo pacman -Sy --noconfirm archlinux-keyring >/dev/null
+sudo pacman -Sy --noconfirm archlinux-keyring >/dev/null 2> >(grep -vE '^warning: archlinux-keyring-[^ ]+ is up to date -- reinstalling$' >&2)
+echo "Keys are correct"

bin/omarchy-weather-status

@@ -12,15 +12,6 @@ fi
 IFS='|' read -r place temperature wind <<< "$weather"
 place=${place%%,*}
 place=${place^}
-format_temperature() {
+temperature=${temperature#+}
-  local celsius=${1#+}
-  celsius=${celsius//°/}
-  celsius=${celsius%C}
-
-  echo "${celsius}°c / $((celsius * 9 / 5 + 32))°f"
-}
-
-temperature=$(format_temperature "$temperature")
-wind=${wind//km\// km/}
 
 echo "$(omarchy-weather-icon)    $place  ·  Temp $temperature  ·  Wind $wind"

config/omarchy/hooks/post-boot.d/weather.sample

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# Show the weather status notification after Omarchy has started.
+# To put it into use, remove .sample from this file name.
+
+weather=$(omarchy-weather-status 2>/dev/null) || true
+
+if [[ -n $weather && $weather != "Weather unavailable" ]]; then
+  notify-send -u low "$weather"
+fi

config/systemd/user/swayosd-server.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=SwayOSD server
+PartOf=graphical-session.target
+After=graphical-session.target
+
+[Service]
+Type=simple
+ExecStart=/usr/bin/swayosd-server
+Restart=always
+RestartSec=2
+
+[Install]
+WantedBy=graphical-session.target

default/bash/completions

@@ -40,6 +40,17 @@ _omarchy_complete() {
     candidates+=("--all" "--json" "--markdown" "--check")
   fi
 
+  if (( ${#candidates[@]} == 0 )) && [[ -x $bin_dir/$prefix ]]; then
+    local args enum
+    args=$(grep -m 1 '^# omarchy:args=<' "$bin_dir/$prefix" 2>/dev/null)
+    enum="${args#*<}"
+    enum="${enum%%>*}"
+
+    if [[ $enum == *"|"* && $enum != *" "* ]]; then
+      read -r -a candidates <<<"${enum//|/ }"
+    fi
+  fi
+
   if (( ${#candidates[@]} > 0 )); then
     local IFS=$'\n'
     COMPREPLY=($(compgen -W "${candidates[*]}" -- "$cur"))

default/hypr/autostart.conf

@@ -3,7 +3,6 @@ exec-once = uwsm-app -- mako
 exec-once = ! omarchy-toggle-enabled waybar-off && uwsm-app -- waybar
 exec-once = uwsm-app -- fcitx5 --disable notificationitem
 exec-once = uwsm-app -- swaybg -i ~/.config/omarchy/current/background -m fill
-exec-once = uwsm-app -- swayosd-server
 exec-once = /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
 exec-once = omarchy-first-run
 exec-once = omarchy-powerprofiles-init
@@ -12,3 +11,6 @@ exec-once = uwsm-app -- omarchy-hyprland-monitor-watch
 # Slow app launch fix -- set systemd vars
 exec-once = systemctl --user import-environment $(env | cut -d'=' -f 1)
 exec-once = dbus-update-activation-environment --systemd --all
+
+# Run post-boot hooks after startup config has loaded
+exec-once = sleep 2 && omarchy-hook post-boot

default/hypr/bindings/utilities.conf

@@ -44,7 +44,12 @@ bindd = SUPER CTRL, PRINT, Extract text (OCR) from screenshot, exec, omarchy-cap
 bindd = SUPER CTRL, S, Share, exec, omarchy-menu share
 
 # Transcoding
-bindd = SUPER CTRL, R, Transcode, exec, omarchy-menu transcode
+bindd = SUPER CTRL, PERIOD, Transcode, exec, omarchy-transcode
+
+# Reminders
+bindd = SUPER CTRL, R, Set reminder, exec, omarchy-menu reminder-set
+bindd = SUPER CTRL ALT, R, Show reminders, exec, omarchy-reminder show
+bindd = SUPER SHIFT CTRL, R, Clear reminders, exec, omarchy-reminder clear
 
 # Waybar-less information
 bindd = SUPER CTRL ALT, T, Show time, exec, notify-send -u low "    $(date +"%A %H:%M  ·  %d %B %Y  ·  Week %V")"

default/mako/core.ini

@@ -1,4 +1,5 @@
 anchor=top-right
+group-by=app-name,summary,body
 default-timeout=5000
 width=420
 outer-margin=20

default/omarchy-skill/SKILL.md

@@ -6,8 +6,8 @@ description: >
   ~/.config/alacritty/, ~/.config/foot/, ~/.config/kitty/, ~/.config/ghostty/, ~/.config/mako/,
   or ~/.config/omarchy/. Triggers: Hyprland, window rules, animations, keybindings,
   monitors, gaps, borders, blur, opacity, waybar, walker, terminal config, themes,
-  wallpaper, night light, idle, lock screen, screenshots, layer rules, workspace
+  wallpaper, night light, idle, lock screen, screenshots, reminders, layer rules,
-  settings, display config, and user-facing omarchy commands. Excludes Omarchy
+  workspace settings, display config, and user-facing omarchy commands. Excludes Omarchy
   source development in ~/.local/share/omarchy/ and `omarchy dev` workflows.
 ---
 
@@ -30,7 +30,7 @@ It is not for contributing to Omarchy source code.
 - Layer rules, workspace settings, display/monitor configuration
 - Themes, wallpapers, fonts, appearance changes
 - User-facing `omarchy` commands (`omarchy theme ...`, `omarchy refresh ...`, `omarchy restart ...`, etc.)
-- Screenshots, screen recording, night light, idle behavior, lock screen
+- Screenshots, screen recording, reminders, night light, idle behavior, lock screen
 
 **If you're about to edit a config file in ~/.config/ on this system, STOP and use this skill first.**
 
@@ -118,6 +118,7 @@ Run `omarchy --help` for the full list. The most common groups:
 | `omarchy install` | Install optional software / packages | `omarchy install docker dbs` |
 | `omarchy launch` | Launch apps | `omarchy launch browser` |
 | `omarchy capture` | Screenshots and recordings | `omarchy capture screenshot` |
+| `omarchy reminder` | Desktop notification reminders | `omarchy reminder 15 "Pickup Jack"` |
 | `omarchy pkg` | Package management | `omarchy pkg install <pkg>` |
 | `omarchy setup` | Initial setup tasks | `omarchy setup fingerprint` |
 | `omarchy update` | System updates | `omarchy update` |
@@ -358,6 +359,17 @@ When user requests system changes:
 5. **Is it a package install?** Use `omarchy install package <pkgs...>` (or `omarchy pkg aur add <pkgs...>` for AUR-only packages)
 6. **Unsure if command exists?** Run `omarchy commands` (or `omarchy <group> --help` for one group)
 
+### Reminder Requests
+
+When the user asks to set a reminder, use `omarchy reminder <minutes> [message]` directly. Convert natural language durations to minutes and title-case short reminder labels when appropriate.
+
+```bash
+omarchy reminder 15 "Pickup Jack"
+omarchy reminder 60 "Check laundry"
+omarchy reminder show
+omarchy reminder clear
+```
+
 ## Out of Scope
 
 This skill intentionally does not cover Omarchy source development. Do not use this skill for:
@@ -372,6 +384,9 @@ This skill intentionally does not cover Omarchy source development. Do not use t
 - "Configure my external monitor" -> Edit `~/.config/hypr/monitors.conf`
 - "Make the window gaps smaller" -> Edit `~/.config/hypr/looknfeel.conf`
 - "Set up night light to turn on at sunset" -> `omarchy toggle nightlight` or edit `~/.config/hypr/hyprsunset.conf`
+- "Set a reminder to pickup jack in 15 minutes" -> `omarchy reminder 15 "Pickup Jack"`
+- "Show my reminders" -> `omarchy reminder show`
+- "Clear all reminders" -> `omarchy reminder clear`
 - "Customize the catppuccin theme colors" -> Create `~/.config/omarchy/themes/catppuccin-custom/` by copying from stock, then edit
 - "Run a script every time I change themes" -> Create `~/.config/omarchy/hooks/theme-set`
 - "Reset waybar to defaults" -> `omarchy refresh waybar`

install/config/all.sh

@@ -50,8 +50,6 @@ run_logged $OMARCHY_INSTALL/config/hardware/intel/fred.sh
 run_logged $OMARCHY_INSTALL/config/hardware/intel/fix-wifi7-eht.sh
 run_logged $OMARCHY_INSTALL/config/hardware/intel/sof-firmware.sh
 
-run_logged $OMARCHY_INSTALL/config/hardware/dell/fix-xps-haptic-touchpad.sh
-
 run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-asus-ptl-display-backlight.sh
 run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-asus-ptl-b9406-display.sh
 run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-asus-ptl-b9406-touchpad.sh

install/config/hardware/dell/fix-xps-haptic-touchpad.sh

@@ -1,36 +0,0 @@
-# Fix Dell XPS haptic touchpad.
-# The Synaptics haptic touchpad (vendor 06CB) uses the HID Manual Trigger
-# protocol, but the kernel's HID haptic subsystem only supports Auto Trigger.
-# This sets up a lightweight daemon that monitors touchpad button events and
-# sends haptic pulses via HID feature reports on the hidraw device.
-# Also disables I2C runtime PM to prevent the haptic engine losing state
-# across suspend/resume.
-
-if omarchy-hw-match "XPS" \
-  && ls /sys/bus/i2c/devices/i2c-VEN_06CB:00 2>/dev/null; then
-
-  # Keep I2C controller power on to prevent haptic engine losing state
-  sudo tee /etc/udev/rules.d/99-dell-xps-haptic-touchpad.rules << 'EOF'
-ACTION=="add", SUBSYSTEM=="pci", KERNEL=="0000:00:19.0", ATTR{power/control}="on"
-ACTION=="add", SUBSYSTEM=="platform", KERNEL=="i2c_designware.0", ATTR{power/control}="on"
-EOF
-  sudo udevadm control --reload-rules
-
-  # Haptic feedback daemon as a systemd service
-  sudo tee /etc/systemd/system/dell-xps-haptic-touchpad.service << SVC
-[Unit]
-Description=Dell XPS haptic touchpad feedback
-After=systemd-udev-settle.service
-
-[Service]
-Type=simple
-ExecStart=$OMARCHY_PATH/bin/omarchy-haptic-touchpad
-Restart=on-failure
-RestartSec=2
-
-[Install]
-WantedBy=multi-user.target
-SVC
-  sudo systemctl daemon-reload
-  sudo systemctl enable dell-xps-haptic-touchpad.service
-fi

install/config/hardware/intel/video-acceleration.sh

@@ -1,8 +1,8 @@
 # This installs hardware video acceleration for Intel GPUs
 
 if INTEL_GPU=$(lspci | grep -iE 'vga|3d|display' | grep -i 'intel'); then
-  # HD Graphics / Iris / Xe / Arc use intel-media-driver + VPL
+  # HD Graphics / Iris / Xe / Arc / Non-Arc Panther Lake use intel-media-driver + VPL
-  if [[ ${INTEL_GPU,,} =~ (hd\ graphics|uhd\ graphics|xe|iris|arc) ]]; then
+  if [[ ${INTEL_GPU,,} =~ (hd\ graphics|uhd\ graphics|xe|iris|arc|panther\ lake) ]]; then
     omarchy-pkg-add intel-media-driver libvpl vpl-gpu-rt
   elif [[ ${INTEL_GPU,,} =~ "gma" ]]; then
     # Older generations from 2008 to ~2014-2017 use libva-intel-driver

install/config/increase-fd-limit.sh

@@ -4,7 +4,7 @@ sudo mkdir -p /etc/systemd/system.conf.d /etc/systemd/user.conf.d
 
 sudo tee /etc/systemd/system.conf.d/99-omarchy-nofile.conf >/dev/null <<'EOF'
 [Manager]
-DefaultLimitNOFILESoft=65536
+DefaultLimitNOFILE=65536:524288
 EOF
 
 sudo cp /etc/systemd/system.conf.d/99-omarchy-nofile.conf \

install/config/omarchy-ai-skill.sh

@@ -1,3 +1,6 @@
-# Place in ~/.claude/skills since all tools populate from there as well as their own sources
+# Place in each assistant's global skills directory so the Omarchy skill is available on first install
-mkdir -p ~/.claude/skills
+mkdir -p ~/.agents/skills ~/.claude/skills ~/.codex/skills ~/.pi/agent/skills
-ln -s $OMARCHY_PATH/default/omarchy-skill ~/.claude/skills/omarchy
+ln -sfn "$OMARCHY_PATH/default/omarchy-skill" ~/.agents/skills/omarchy
+ln -sfn "$OMARCHY_PATH/default/omarchy-skill" ~/.claude/skills/omarchy
+ln -sfn "$OMARCHY_PATH/default/omarchy-skill" ~/.codex/skills/omarchy
+ln -sfn "$OMARCHY_PATH/default/omarchy-skill" ~/.pi/agent/skills/omarchy

install/first-run/swayosd.sh

@@ -0,0 +1,2 @@
+systemctl --user daemon-reload
+systemctl --user enable --now swayosd-server.service

install/omarchy-other.packages

@@ -61,6 +61,9 @@ vulkan-asahi
 # Surface laptop support packages
 linux-firmware-marvell
 
+# Dell laptop support packages
+dell-xps-touchpad-haptics
+
 # T2 MacBook support packages
 apple-bcm-firmware
 apple-t2-audio-config

install/packaging/all.sh

@@ -7,4 +7,5 @@ run_logged $OMARCHY_INSTALL/packaging/tuis.sh
 run_logged $OMARCHY_INSTALL/packaging/npx.sh
 run_logged $OMARCHY_INSTALL/packaging/asus-rog.sh
 run_logged $OMARCHY_INSTALL/packaging/framework16.sh
+run_logged $OMARCHY_INSTALL/packaging/dell-xps-touchpad-haptics.sh
 run_logged $OMARCHY_INSTALL/packaging/surface.sh

install/packaging/dell-xps-touchpad-haptics.sh

@@ -0,0 +1,3 @@
+if omarchy-hw-dell-xps-haptic-touchpad; then
+  omarchy-pkg-add dell-xps-touchpad-haptics
+fi

install/packaging/npx.sh

@@ -3,5 +3,5 @@ omarchy-npx-install @google/gemini-cli gemini
 omarchy-npx-install @github/copilot copilot
 omarchy-npx-install opencode-ai opencode
 omarchy-npx-install playwright playwright-cli
-omarchy-npx-install @mariozechner/pi-coding-agent pi
+omarchy-npx-install @earendil-works/pi-coding-agent pi
 omarchy-npx-install @kitlangton/ghui ghui

migrations/1777653181.sh

@@ -0,0 +1,14 @@
+echo "Move Dell XPS touchpad haptics into the packaged service"
+
+if omarchy-hw-dell-xps-haptic-touchpad; then
+  sudo systemctl disable --now dell-xps-haptic-touchpad.service 2>/dev/null || true
+  sudo rm -f /etc/systemd/system/dell-xps-haptic-touchpad.service
+  sudo rm -f /etc/systemd/system/multi-user.target.wants/dell-xps-haptic-touchpad.service
+  sudo rm -rf /etc/systemd/system/dell-xps-haptic-touchpad.service.d
+  sudo rm -f /etc/udev/rules.d/99-dell-xps-haptic-touchpad.rules
+  sudo rm -f /etc/omarchy-dell-haptic-touchpad.env
+  sudo systemctl daemon-reload
+  sudo udevadm control --reload-rules
+
+  source "$OMARCHY_PATH/install/packaging/dell-xps-touchpad-haptics.sh"
+fi

migrations/1778079164.sh

@@ -0,0 +1,7 @@
+echo "Update Pi CLI wrapper package"
+
+pi_bin="$HOME/.local/bin/pi"
+
+if [[ -f $pi_bin ]] && grep -q '^package="@mariozechner/pi-coding-agent"$' "$pi_bin"; then
+  sed -i 's|^package="@mariozechner/pi-coding-agent"$|package="@earendil-works/pi-coding-agent"|' "$pi_bin"
+fi

migrations/1778165347.sh

@@ -0,0 +1,5 @@
+echo "Install hardware video acceleration for Intel GPUs on non-X Panther Lake systems"
+
+if lspci | grep -iE 'vga|3d|display' | grep -i 'intel' | grep -i 'panther lake' | grep -qi 'intel graphics'; then
+  bash "$OMARCHY_PATH/install/config/hardware/intel/video-acceleration.sh"
+fi

migrations/1778171768.sh

@@ -0,0 +1,12 @@
+echo "Run SwayOSD as a supervised session service"
+
+mkdir -p ~/.config/systemd/user
+cp "$OMARCHY_PATH/config/systemd/user/swayosd-server.service" ~/.config/systemd/user/swayosd-server.service
+
+if [[ -f ~/.config/hypr/autostart.conf ]]; then
+  sed -i '/^exec-once = uwsm-app -- swayosd-server$/d' ~/.config/hypr/autostart.conf
+fi
+
+pkill -x swayosd-server || true
+
+bash "$OMARCHY_PATH/install/first-run/swayosd.sh"

migrations/1778222128.sh

@@ -0,0 +1,7 @@
+echo "Add sample post-boot hook"
+
+mkdir -p ~/.config/omarchy/hooks/post-boot.d
+
+if [[ ! -f ~/.config/omarchy/hooks/post-boot.d/weather.sample ]]; then
+  cp "$OMARCHY_PATH/config/omarchy/hooks/post-boot.d/weather.sample" ~/.config/omarchy/hooks/post-boot.d/weather.sample
+fi

migrations/1778233760.sh

@@ -0,0 +1,3 @@
+echo "Add Omarchy AI skill to pi, Codex, and shared Agent Skills directories"
+
+source "$OMARCHY_PATH/install/config/omarchy-ai-skill.sh"

test/omarchy-cli-test.sh

@@ -69,8 +69,8 @@ pass "fallback commands are inferred and documented"
 "$CLI" commands --all --json | jq -e '.commands[] | select(.route == "omarchy dev benchmark")' >/dev/null
 pass "benchmark command is discoverable in all commands"
 
-"$CLI" commands --json | jq -e '.commands[] | select(.binary == "omarchy-pkg-add" and .route == "omarchy install package" and .filename_route == "omarchy pkg add" and (.routes | index("omarchy pkg add")))' >/dev/null
+"$CLI" commands --json | jq -e '.commands[] | select(.binary == "omarchy-pkg-add" and .route == "omarchy pkg add" and .filename_route == "omarchy pkg add" and (.routes | index("omarchy pkg add")))' >/dev/null
-pass "JSON exposes canonical and filename-derived routes"
+pass "JSON exposes direct pkg add route"
 
 "$CLI" commands --json | jq -e '.commands[] | select(.binary == "omarchy-refresh-pacman" and .requires_sudo == true)' >/dev/null
 pass "sudo metadata marks sudo commands"
@@ -79,11 +79,12 @@ output=$("$CLI" theme --help)
 assert_output_contains "group help renders" "$output" "Theme commands"
 
 output=$("$CLI" install --help)
-assert_output_contains "install group help renders" "$output" "omarchy install package <packages...>"
+assert_output_contains "install group help renders" "$output" "Install commands"
+assert_output_contains "install group includes browser route" "$output" "omarchy install browser"
 
 output=$("$CLI" install)
 assert_output_contains "bare group renders help instead of picker" "$output" "Install commands"
-assert_output_contains "bare group includes package route" "$output" "omarchy install package <packages...>"
+assert_output_contains "bare group includes browser route" "$output" "omarchy install browser"
 
 output=$("$CLI" toggle)
 assert_output_contains "bare root command with children renders help" "$output" "Toggle commands"
@@ -166,8 +167,8 @@ assert_output_contains "root alias resolves to command help" "$output" "omarchy-
 pass "aliases are included in JSON metadata"
 
 output=$("$CLI" pkg add --help)
-assert_output_contains "fallback route resolves to curated metadata" "$output" "omarchy-pkg-add"
+assert_output_contains "pkg add help resolves" "$output" "omarchy-pkg-add"
-assert_output_contains "fallback route shows canonical route" "$output" "omarchy install package <packages...>"
+assert_output_contains "pkg add help shows direct route" "$output" "omarchy pkg add <packages...>"
 
 output=$("$CLI" system reboot --help)
 assert_output_contains "system command help is safe" "$output" "omarchy-system-reboot"