Not worth the extraction

bin/omarchy

@@ -53,7 +53,6 @@ GROUP_DESCRIPTIONS[npx]="NPX package wrappers"
 GROUP_DESCRIPTIONS[pkg]="Package management helpers"
 GROUP_DESCRIPTIONS[plymouth]="Plymouth boot theme management"
 GROUP_DESCRIPTIONS[powerprofiles]="Power profile management"
-GROUP_DESCRIPTIONS[echo]="Colored terminal output helpers"
 GROUP_DESCRIPTIONS[refresh]="Reset config to defaults"
 GROUP_DESCRIPTIONS[reinstall]="Reinstall and reset workflows"
 GROUP_DESCRIPTIONS[reminder]="Desktop notification reminders"

bin/omarchy-echo-failure

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Print a failure message in red
-# omarchy:args=<message>
-
-RED='\033[0;31m'
-NC='\033[0m'
-
-echo -e "${RED}$*${NC}"

bin/omarchy-echo-info

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Print an informational message in yellow
-# omarchy:args=<message>
-
-YELLOW='\033[1;33m'
-NC='\033[0m'
-
-echo -e "${YELLOW}$*${NC}"

bin/omarchy-echo-success

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-# omarchy:summary=Print a success message in green
-# omarchy:args=<message>
-
-GREEN='\033[0;32m'
-NC='\033[0m'
-
-echo -e "${GREEN}$*${NC}"

bin/omarchy-remove-security-fido2

@@ -9,27 +9,27 @@ set -e
 remove_pam_config() {
   # Remove from sudo
   if grep -q pam_u2f.so /etc/pam.d/sudo; then
-    omarchy-echo-info "Removing FIDO2 authentication from sudo..."
+    echo "Removing FIDO2 authentication from sudo..."
     sudo sed -i '/pam_u2f\.so/d' /etc/pam.d/sudo
   fi
 
   # Remove from polkit
   if [[ -f /etc/pam.d/polkit-1 ]] && grep -Fq 'pam_u2f.so' /etc/pam.d/polkit-1; then
-    omarchy-echo-info "Removing FIDO2 authentication from polkit..."
+    echo "Removing FIDO2 authentication from polkit..."
     sudo sed -i '/pam_u2f\.so/d' /etc/pam.d/polkit-1
   fi
 }
 
-omarchy-echo-success "Removing FIDO2 device from authentication.\n"
+echo -e "\e[32mRemoving FIDO2 device from authentication.\n\e[0m"
 
 remove_pam_config
 
 if [[ -d /etc/fido2 ]]; then
-  omarchy-echo-info "Removing FIDO2 configuration..."
+  echo "Removing FIDO2 configuration..."
   sudo rm -rf /etc/fido2
 fi
 
-omarchy-echo-info "Removing FIDO2 packages..."
+echo "Removing FIDO2 packages..."
 omarchy-pkg-drop libfido2 pam-u2f
 
-omarchy-echo-success "FIDO2 authentication has been completely removed."
+echo -e "\e[32mFIDO2 authentication has been completely removed.\e[0m"

bin/omarchy-remove-security-fingerprint

@@ -9,29 +9,29 @@ set -e
 remove_pam_config() {
   # Remove from sudo
   if grep -q pam_fprintd.so /etc/pam.d/sudo; then
-    omarchy-echo-info "Removing fingerprint authentication from sudo..."
+    echo "Removing fingerprint authentication from sudo..."
     sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/sudo
   fi
 
   # Remove from polkit
   if [[ -f /etc/pam.d/polkit-1 ]] && grep -Fq 'pam_fprintd.so' /etc/pam.d/polkit-1; then
-    omarchy-echo-info "Removing fingerprint authentication from polkit..."
+    echo "Removing fingerprint authentication from polkit..."
     sudo sed -i '/pam_fprintd\.so/d' /etc/pam.d/polkit-1
   fi
 }
 
 remove_hyprlock_fingerprint_icon() {
-  omarchy-echo-info "Removing fingerprint icon from hyprlock placeholder text..."
+  echo "Removing fingerprint icon from hyprlock placeholder text..."
   sed -i 's/placeholder_text = .*/placeholder_text = Enter Password/' ~/.config/hypr/hyprlock.conf
   sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = false/' ~/.config/hypr/hyprlock.conf
 }
 
-omarchy-echo-success "Removing fingerprint scanner from authentication.\n"
+echo -e "\e[32mRemoving fingerprint scanner from authentication.\n\e[0m"
 
 remove_pam_config
 remove_hyprlock_fingerprint_icon
 
-omarchy-echo-info "Removing fingerprint packages..."
+echo "Removing fingerprint packages..."
 omarchy-pkg-drop fprintd libfprint-git
 
-omarchy-echo-success "Fingerprint authentication has been completely removed."
+echo -e "\e[32mFingerprint authentication has been completely removed.\e[0m"

bin/omarchy-setup-security-fido2

@@ -9,7 +9,7 @@ set -e
 check_fido2_hardware() {
   tokens=$(fido2-token -L 2>/dev/null)
   if [[ -z $tokens ]]; then
-    omarchy-echo-failure "\nNo FIDO2 device detected. Please plug it in (you may need to unlock it as well)."
+    echo -e "\e[31m\nNo FIDO2 device detected. Please plug it in (you may need to unlock it as well).\e[0m"
     return 1
   fi
   return 0
@@ -18,16 +18,16 @@ check_fido2_hardware() {
 setup_pam_config() {
   # Configure sudo
   if ! grep -q pam_u2f.so /etc/pam.d/sudo; then
-    omarchy-echo-info "Configuring sudo for FIDO2 authentication..."
+    echo "Configuring sudo for FIDO2 authentication..."
     sudo sed -i '1i auth    sufficient pam_u2f.so cue authfile=/etc/fido2/fido2' /etc/pam.d/sudo
   fi
 
   # Configure polkit
   if [[ -f /etc/pam.d/polkit-1 ]] && ! grep -q 'pam_u2f.so' /etc/pam.d/polkit-1; then
-    omarchy-echo-info "Configuring polkit for FIDO2 authentication..."
+    echo "Configuring polkit for FIDO2 authentication..."
     sudo sed -i '1i auth      sufficient pam_u2f.so cue authfile=/etc/fido2/fido2' /etc/pam.d/polkit-1
   elif [[ ! -f /etc/pam.d/polkit-1 ]]; then
-    omarchy-echo-info "Creating polkit configuration with FIDO2 authentication..."
+    echo "Creating polkit configuration with FIDO2 authentication..."
     sudo tee /etc/pam.d/polkit-1 >/dev/null <<'EOF'
 auth      sufficient pam_u2f.so cue authfile=/etc/fido2/fido2
 auth      required pam_unix.so
@@ -39,10 +39,10 @@ EOF
   fi
 }
 
-omarchy-echo-success "Setting up FIDO2 device for authentication.\n"
+echo -e "\e[32mSetting up FIDO2 device for authentication.\n\e[0m"
 
 # Install required packages
-omarchy-echo-info "Installing required packages..."
+echo "Installing required packages..."
 omarchy-pkg-add libfido2 pam-u2f
 
 if ! check_fido2_hardware; then
@@ -52,30 +52,30 @@ fi
 # Create the pamu2fcfg file
 if [[ ! -f /etc/fido2/fido2 ]]; then
   sudo mkdir -p /etc/fido2
-  omarchy-echo-success "\nLet's setup your device by confirming on the device now."
-  omarchy-echo-info "Touch your FIDO2 key when it lights up...\n"
+  echo -e "\e[32m\nLet's setup your device by confirming on the device now.\e[0m"
+  echo -e "Touch your FIDO2 key when it lights up...\n"
 
   if pamu2fcfg >/tmp/fido2; then
     sudo mv /tmp/fido2 /etc/fido2/fido2
-    omarchy-echo-success "FIDO2 device registered successfully!"
+    echo -e "\e[32mFIDO2 device registered successfully!\e[0m"
   else
-    omarchy-echo-failure "\nFIDO2 registration failed. Please try again."
+    echo -e "\e[31m\nFIDO2 registration failed. Please try again.\e[0m"
     exit 1
   fi
 else
-  omarchy-echo-info "FIDO2 device already registered."
+  echo "FIDO2 device already registered."
 fi
 
 # Configure PAM
 setup_pam_config
 
 # Test with sudo
-omarchy-echo-info "\nTesting FIDO2 authentication with sudo..."
-omarchy-echo-info "Touch your FIDO2 key when prompted.\n"
+echo -e "\nTesting FIDO2 authentication with sudo..."
+echo -e "Touch your FIDO2 key when prompted.\n"
 
 if sudo echo "FIDO2 authentication test successful"; then
-  omarchy-echo-success "\nPerfect! FIDO2 authentication is now configured."
-  omarchy-echo-info "You can use your FIDO2 key for sudo and polkit authentication."
+  echo -e "\e[32m\nPerfect! FIDO2 authentication is now configured.\e[0m"
+  echo "You can use your FIDO2 key for sudo and polkit authentication."
 else
-  omarchy-echo-failure "\nVerification failed. You may want to check your configuration."
+  echo -e "\e[31m\nVerification failed. You may want to check your configuration.\e[0m"
 fi

bin/omarchy-setup-security-fingerprint

@@ -12,7 +12,7 @@ check_fingerprint_hardware() {
 
   # Exit if no devices found
   if [[ -z $devices ]]; then
-    omarchy-echo-failure "\nNo fingerprint sensor detected."
+    echo -e "\e[31m\nNo fingerprint sensor detected.\e[0m"
     return 1
   fi
   return 0
@@ -21,16 +21,16 @@ check_fingerprint_hardware() {
 setup_pam_config() {
   # Configure sudo
   if ! grep -q pam_fprintd.so /etc/pam.d/sudo; then
-    omarchy-echo-info "Configuring sudo for fingerprint authentication..."
+    echo "Configuring sudo for fingerprint authentication..."
     sudo sed -i '1i auth    sufficient pam_fprintd.so' /etc/pam.d/sudo
   fi
 
   # Configure polkit
   if [[ -f /etc/pam.d/polkit-1 ]] && ! grep -q 'pam_fprintd.so' /etc/pam.d/polkit-1; then
-    omarchy-echo-info "Configuring polkit for fingerprint authentication..."
+    echo "Configuring polkit for fingerprint authentication..."
     sudo sed -i '1i auth      sufficient pam_fprintd.so' /etc/pam.d/polkit-1
   elif [[ ! -f /etc/pam.d/polkit-1 ]]; then
-    omarchy-echo-info "Creating polkit configuration with fingerprint authentication..."
+    echo "Creating polkit configuration with fingerprint authentication..."
     sudo tee /etc/pam.d/polkit-1 >/dev/null <<'EOF'
 auth      sufficient pam_fprintd.so
 auth      required pam_unix.so
@@ -43,15 +43,15 @@ EOF
 }
 
 add_hyprlock_fingerprint_icon() {
-  omarchy-echo-info "Adding fingerprint icon to hyprlock placeholder text..."
+  echo "Adding fingerprint icon to hyprlock placeholder text..."
   sed -i 's/placeholder_text = .*/placeholder_text = <span> Enter Password 󰈷 <\/span>/' ~/.config/hypr/hyprlock.conf
   sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = true/' ~/.config/hypr/hyprlock.conf
 }
 
-omarchy-echo-success "Setting up fingerprint scanner for authentication.\n"
+echo -e "\e[32mSetting up fingerprint scanner for authentication.\n\e[0m"
 
 # Install required packages
-omarchy-echo-info "Installing required packages..."
+echo "Installing required packages..."
 
 # libfprint-git provides+conflicts libfprint; pacman -S --noconfirm
 # defaults the conflict prompt to N and aborts. Pre-remove libfprint
@@ -75,21 +75,21 @@ setup_pam_config
 add_hyprlock_fingerprint_icon
 
 # Enroll first fingerprint
-omarchy-echo-success "\nLet's setup your right index finger as the first fingerprint."
-omarchy-echo-info "Keep moving the finger around on sensor until the process completes.\n"
+echo -e "\e[32m\nLet's setup your right index finger as the first fingerprint.\e[0m"
+echo -e "Keep moving the finger around on sensor until the process completes.\n"
 
 if sudo fprintd-enroll "$USER"; then
-  omarchy-echo-success "\nFingerprint enrolled successfully!"
+  echo -e "\e[32m\nFingerprint enrolled successfully!\e[0m"
 
   # Verify
-  omarchy-echo-info "\nNow let's verify that it's working correctly.\n"
+  echo -e "\nNow let's verify that it's working correctly.\n"
   if fprintd-verify; then
-    omarchy-echo-success "\nPerfect! Fingerprint authentication is now configured."
-    omarchy-echo-info "You can use your fingerprint for sudo, polkit, and lock screen (Super + Escape)."
+    echo -e "\e[32m\nPerfect! Fingerprint authentication is now configured.\e[0m"
+    echo "You can use your fingerprint for sudo, polkit, and lock screen (Super + Escape)."
   else
-    omarchy-echo-failure "\nVerification failed. You may want to try enrolling again."
+    echo -e "\e[31m\nVerification failed. You may want to try enrolling again.\e[0m"
   fi
 else
-  omarchy-echo-failure "\nEnrollment failed. Please try again."
+  echo -e "\e[31m\nEnrollment failed. Please try again.\e[0m"
   exit 1
 fi