add packages & dotfiles

airootfs/root/.config/btop/btop.conf

@@ -0,0 +1,343 @@
+#? Config file for btop v.1.4.6
+
+#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
+#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
+color_theme = "current"
+
+#* If the theme set background should be shown, set to False if you want terminal background transparency.
+theme_background = true
+
+#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
+truecolor = true
+
+#* Set to true to force tty mode regardless if a real tty has been detected or not.
+#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
+force_tty = false
+
+#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
+#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
+#* Use whitespace " " as separator between different presets.
+#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
+presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
+
+#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
+#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
+vim_keys = true
+
+#* Rounded corners on boxes, is ignored if TTY mode is ON.
+rounded_corners = true
+
+#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
+terminal_sync = true
+
+#* Default symbols to use for graph creation, "braille", "block" or "tty".
+#* "braille" offers the highest resolution but might not be included in all fonts.
+#* "block" has half the resolution of braille but uses more common characters.
+#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
+#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
+graph_symbol = "braille"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_cpu = "default"
+
+# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
+graph_symbol_gpu = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_mem = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_net = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_proc = "default"
+
+#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
+shown_boxes = "cpu mem net proc"
+
+#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
+update_ms = 2000
+
+#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
+#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
+proc_sorting = "cpu lazy"
+
+#* Reverse sorting order, True or False.
+proc_reversed = false
+
+#* Show processes as a tree.
+proc_tree = false
+
+#* Use the cpu graph colors in the process list.
+proc_colors = true
+
+#* Use a darkening gradient in the process list.
+proc_gradient = true
+
+#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
+proc_per_core = false
+
+#* Show process memory as bytes instead of percent.
+proc_mem_bytes = true
+
+#* Show cpu graph for each process.
+proc_cpu_graphs = true
+
+#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
+proc_info_smaps = false
+
+#* Show proc box on left side of screen instead of right.
+proc_left = false
+
+#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
+proc_filter_kernel = false
+
+#* In tree-view, always accumulate child process resources in the parent process.
+proc_aggregate = false
+
+#* Should cpu and memory usage display be preserved for dead processes when paused.
+keep_dead_proc_usage = false
+
+#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_upper = "Auto"
+
+#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_lower = "Auto"
+
+#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
+show_gpu_info = "Auto"
+
+#* Toggles if the lower CPU graph should be inverted.
+cpu_invert_lower = true
+
+#* Set to True to completely disable the lower CPU graph.
+cpu_single_graph = false
+
+#* Show cpu box at bottom of screen instead of top.
+cpu_bottom = false
+
+#* Shows the system uptime in the CPU box.
+show_uptime = true
+
+#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
+show_cpu_watts = true
+
+#* Show cpu temperature.
+check_temp = true
+
+#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
+cpu_sensor = "Auto"
+
+#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
+show_coretemp = true
+
+#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
+#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
+#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
+#* Example: "4:0 5:1 6:3"
+cpu_core_map = ""
+
+#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
+temp_scale = "celsius"
+
+#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
+base_10_sizes = false
+
+#* Show CPU frequency.
+show_cpu_freq = true
+
+#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
+freq_mode = "first"
+
+#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
+#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
+clock_format = "%X"
+
+#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
+background_update = true
+
+#* Custom cpu model name, empty string to disable.
+custom_cpu_name = ""
+
+#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
+#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
+disks_filter = ""
+
+#* Show graphs instead of meters for memory values.
+mem_graphs = true
+
+#* Show mem box below net box instead of above.
+mem_below_net = false
+
+#* Count ZFS ARC in cached and available memory.
+zfs_arc_cached = true
+
+#* If swap memory should be shown in memory box.
+show_swap = true
+
+#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
+swap_disk = true
+
+#* If mem box should be split to also show disks info.
+show_disks = true
+
+#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
+only_physical = true
+
+#* Read disks list from /etc/fstab. This also disables only_physical.
+use_fstab = true
+
+#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
+zfs_hide_datasets = false
+
+#* Set to true to show available disk space for privileged users.
+disk_free_priv = false
+
+#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
+show_io_stat = true
+
+#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
+io_mode = false
+
+#* Set to True to show combined read/write io graphs in io mode.
+io_graph_combined = false
+
+#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
+#* Example: "/mnt/media:100 /:20 /boot:1".
+io_graph_speeds = ""
+
+#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
+net_download = 100
+
+net_upload = 100
+
+#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
+net_auto = true
+
+#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
+net_sync = true
+
+#* Starts with the Network Interface specified here.
+net_iface = ""
+
+#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
+base_10_bitrate = "Auto"
+
+#* Show battery stats in top right if battery is present.
+show_battery = true
+
+#* Which battery to use if multiple are present. "Auto" for auto detection.
+selected_battery = "Auto"
+
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = true
+
+#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
+log_level = "WARNING"
+
+#* Automatically save current settings to config file on exit.
+save_config_on_exit = true
+
+#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
+nvml_measure_pcie_speeds = true
+
+#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
+rsmi_measure_pcie_speeds = true
+
+#* Horizontally mirror the GPU graph.
+gpu_mirror_graph = true
+
+#* Set which GPU vendors to show. Available values are "nvidia amd intel"
+shown_gpus = "nvidia amd intel"
+
+#* Custom gpu0 model name, empty string to disable.
+custom_gpu_name0 = ""
+
+#* Custom gpu1 model name, empty string to disable.
+custom_gpu_name1 = ""
+
+#* Custom gpu2 model name, empty string to disable.
+custom_gpu_name2 = ""
+
+#* Custom gpu3 model name, empty string to disable.
+custom_gpu_name3 = ""
+
+#* Custom gpu4 model name, empty string to disable.
+custom_gpu_name4 = ""
+
+#* Custom gpu5 model name, empty string to disable.
+custom_gpu_name5 = ""
+
+
+# ────────────────────────────────────────────────────────────
+# BTOP THEME — Rainy Night City (matches your wallpaper)
+# ────────────────────────────────────────────────────────────
+
+# Transparent / dark night background
+theme[main_bg]="#1e2030"
+
+# Main text – soft grey-blue (city lights)
+theme[main_fg]="#cdd3e1"
+
+# Titles – light blue highlight (lamp glow)
+theme[title]="#d6e7ff"
+
+# Highlight text – muted light grey-blue
+theme[hi_fg]="#bfc6d4"
+
+# Selected row – deeper night shade
+theme[selected_bg]="#14151f"
+
+# Selected row text – bright white-blue
+theme[selected_fg]="#e8f1ff"
+
+# Inactive/dim text – distant-building grey
+theme[inactive_fg]="#7d8291"
+
+# Misc text – light city grey
+theme[proc_misc]="#bfc6d4"
+
+# Box outlines – subtle bluish-grey (window frame color)
+theme[cpu_box]="#292b3b"
+theme[mem_box]="#292b3b"
+theme[net_box]="#292b3b"
+theme[proc_box]="#292b3b"
+
+# Divider lines – same subtle outline tone
+theme[div_line]="#292b3b"
+
+# Graph gradients – smooth blue-grey (rain & neon reflections)
+theme[temp_start]="#4a4f65"
+theme[temp_mid]="#8c92a3"
+theme[temp_end]="#d6e7ff"
+
+theme[cpu_start]="#4a4f65"
+theme[cpu_mid]="#8c92a3"
+theme[cpu_end]="#d6e7ff"
+
+theme[free_start]="#4a4f65"
+theme[free_mid]="#8c92a3"
+theme[free_end]="#d6e7ff"
+
+theme[cached_start]="#4a4f65"
+theme[cached_mid]="#8c92a3"
+theme[cached_end]="#d6e7ff"
+
+theme[available_start]="#4a4f65"
+theme[available_mid]="#8c92a3"
+theme[available_end]="#d6e7ff"
+
+theme[used_start]="#4a4f65"
+theme[used_mid]="#8c92a3"
+theme[used_end]="#d6e7ff"
+
+theme[download_start]="#4a4f65"
+theme[download_mid]="#8c92a3"
+theme[download_end]="#d6e7ff"
+
+theme[upload_start]="#4a4f65"
+theme[upload_mid]="#8c92a3"
+theme[upload_end]="#d6e7ff"

airootfs/root/.config/cava/config

@@ -0,0 +1,331 @@
+## Configuration file for CAVA.
+# Remove the ; to change parameters.
+
+
+[general]
+
+# Auto reload config if the configuration file has changed. 1 = on, 0 = off.
+; live-config = 0
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
+; mode = normal
+
+# Accepts only non-negative values.
+; framerate = 60
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# new as of 0.6.0 autosens of low values (dynamic range)
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
+; autosens = 1
+; overshoot = 20
+
+# Manual sensitivity in %. If autosens is enabled, this will only be the initial value.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-512). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+; bars = 0
+; bar_width = 2
+; bar_spacing = 1
+# bar_height is only used for output in "noritake" format
+; bar_height = 32
+
+# For SDL width and space between bars is in pixels, defaults are:
+; bar_width = 20
+; bar_spacing = 5
+
+# sdl_glsl have these default values, they are only used to calculate max number of bars.
+; bar_width = 1
+; bar_spacing = 0
+
+# ceter bars in terminal, if there is space.
+; center_align = 1
+
+# max height of bars in terminal, in percent of terminal height.
+; max_height = 100
+
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff frequency if needed to satisfy the minimum bandwidth.
+; lower_cutoff_freq = 50
+; higher_cutoff_freq = 10000
+
+
+# Seconds with no input before cava goes to sleep mode. Cava will not perform FFT or drawing and
+# only check for input once per second. Cava will wake up once input is detected. 0 = disable.
+; sleep_timer = 0
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'fifo', 'portaudio', 'pipewire', 'alsa', 'pulse', 'sndio', 'oss', 'jack' or 'shmem'
+# Defaults to 'oss', 'pipewire', 'sndio', 'jack', 'pulse', 'alsa', 'portaudio' or 'fifo', in that order, dependent on what support cava was built with.
+# On Mac it defaults to 'portaudio' or 'fifo'
+# On windows this is automatic and no input settings are needed.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio and pipewire 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+#
+# For pipewire 'source' will be the object name or object.serial of the device to capture from.
+# Both input and output devices are supported. To capture the monitor source of a sink node, append '.monitor' to the sink's object name.
+#
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+# For shmem 'source' will be /squeezelite-AA:BB:CC:DD:EE:FF where 'AA:BB:CC:DD:EE:FF' will be squeezelite's MAC address
+#
+# For sndio 'source' will be a raw recording audio descriptor or a monitoring sub-device, e.g. 'rsnd/2' or 'snd/1'. Default: 'default'.
+# README.md contains further information on how to setup CAVA for sndio.
+#
+# For oss 'source' will be the path to a audio device, e.g. '/dev/dsp2'. Default: '/dev/dsp', i.e. the default audio device.
+# README.md contains further information on how to setup CAVA for OSS on FreeBSD.
+#
+# For jack 'source' will be the name of the JACK server to connect to, e.g. 'foobar'. Default: 'default'.
+# README.md contains further information on how to setup CAVA for JACK.
+#
+; method = pulse
+; source = auto
+
+; method = pipewire
+; source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+
+; method = shmem
+; source = /squeezelite-AA:BB:CC:DD:EE:FF
+
+; method = portaudio
+; source = auto
+
+; method = sndio
+; source = default
+
+; method = oss
+; source = /dev/dsp
+
+; method = jack
+; source = default
+
+# The options 'sample_rate', 'sample_bits', 'channels' and 'autoconnect' can be configured for some input methods:
+#   sample_rate: fifo, pipewire, sndio, oss
+#   sample_bits: fifo, pipewire, sndio, oss
+#   channels:    sndio, oss, jack
+#   autoconnect: jack
+# Other methods ignore these settings.
+# For pipewire, sample_rate will default to 48000, for all other input methods, sample_rate will default to 44100.
+#
+# For 'sndio' and 'oss' they are only preferred values, i.e. if the values are not supported
+# by the chosen audio device, the device will use other supported values instead.
+# Example: 48000, 32 and 2, but the device only supports 44100, 16 and 1, then it
+# will use 44100, 16 and 1.
+#
+#
+# The 'pipewire' input method has three options to control linking and mixing:
+#   active: Force the node to always process. Useful for monitoring sources when no other application is active.
+#   remix: Allow pipewire to remix audio channels to match cava's channel count. Useful for surround sound.
+#   virtual: Set the node to virtual, to avoid recording notifications from the DE.
+#
+; sample_rate = 44100
+; sample_bits = 16
+; channels = 2
+; autoconnect = 2
+; active = 1
+; remix = 1
+; virtual = 1
+
+
+[output]
+
+# Output method. Can be 'ncurses', 'noncurses', 'raw', 'noritake', 'sdl'
+# or 'sdl_glsl'.
+# 'noncurses' (default) uses a buffer and cursor movements to only print
+# changes from frame to frame in the terminal. Uses less resources and is less
+# prone to tearing (vsync issues) than 'ncurses'.
+#
+# 'raw' is an 8 or 16 bit (configurable via the 'bit_format' option) data
+# stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 1024 bars stereo (512 bars mono), which can be adjusted in the 'bars' option above.
+#
+# 'noritake' outputs a bitmap in the format expected by a Noritake VFD display
+#  in graphic mode. It only support the 3000 series graphical VFDs for now.
+#
+# 'sdl' uses the Simple DirectMedia Layer to render in a graphical context.
+# 'sdl_glsl' uses SDL to create an OpenGL context. Write your own shaders or
+# use one of the predefined ones.
+; method = noncurses
+
+# Orientation of the visualization. Can be 'bottom', 'top', 'left', 'right' or
+# 'horizontal'. Default is 'bottom'. 'left and 'right' are only supported on sdl
+# and ncruses output. 'horizontal' (bars go up and down from center) is only supported
+# on noncurses output.
+# Note: many fonts have weird or missing glyphs for characters used in orientations
+# other than 'bottom', which can make output not look right.
+; orientation = bottom
+
+# Visual channels. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' outputs left to right lowest to highest frequencies.
+# 'mono_option' set mono to either take input from 'left', 'right' or 'average'.
+# set 'reverse' to 1 to display frequencies the other way around.
+; channels = stereo
+; mono_option = average
+; reverse = 0
+
+# Only valid if orientation is set to 'horizontal'.
+# Set 'horizontal_stereo' to 1 to have left channel bars at top and right channel at bottom.
+# Set 'left_bottom' to 0 to have right channel at top and left channel at bottom.
+; horizontal_stereo = 0
+; left_bottom = 1
+
+# Raw output target.
+# On Linux, a fifo will be created if target does not exist.
+# On Windows, a named pipe will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+# sdl window size and position. -1,-1 is centered.
+; sdl_width = 1024
+; sdl_height = 512
+; sdl_x = -1
+; sdl_y= -1
+; sdl_full_screen = 0
+
+# set label on bars on the x-axis. Can be 'frequency' or 'none'. Default: 'none'
+# 'frequency' displays the lower cut off frequency of the bar above.
+# Only supported on ncurses and noncurses output.
+; xaxis = none
+
+# enable synchronized sync. 1 = on, 0 = off
+# removes flickering in alacritty terminal emulator.
+# defaults to off since the behaviour in other terminal emulators is unknown
+; synchronized_sync = 0
+
+# Shaders for sdl_glsl, located in $HOME/.config/cava/shaders
+; vertex_shader = pass_through.vert
+; fragment_shader = bar_spectrum.frag
+
+; for glsl output mode, keep rendering even if no audio
+; continuous_rendering = 0
+
+# disable console blank (screen saver) in tty
+# (Not supported on FreeBSD)
+; disable_blanking = 0
+
+# show a flat bar at the bottom of the screen when idle, 1 = on, 0 = off
+; show_idle_bar_heads = 1
+
+# show waveform instead of frequency spectrum, 1 = on, 0 = off
+; waveform = 0
+
+[color]
+
+# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
+# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires
+# a terminal that can change color definitions such as Gnome-terminal or rxvt.
+# default is to keep current terminal color
+; background = default
+; foreground = default
+
+# SDL and sdl_glsl only support hex code colors, these are the default:
+; background = '#111111'
+; foreground = '#33ffff'
+
+
+# Gradient mode, only hex defined colors are supported,
+# background must also be defined in hex or remain commented out. 1 = on, 0 = off.
+# You can define as many as 8 different colors. They range from bottom to top of screen
+gradient = 1
+gradient_count = 8
+gradient_color_1 = '#91e3e1'
+gradient_color_2 = '#a7aaaf'
+gradient_color_3 = '#d7d8db'
+gradient_color_4 = '#e382d2'
+gradient_color_5 = '#f6cbee'
+gradient_color_6 = '#d9f7f6'
+gradient_color_7 = '#f6cbee'
+gradient_color_8 = '#91e3e1'
+
+
+# Horizontal is only supported on noncurses output.
+# Only one color will be calculated per bar.
+; horizontal_gradient = 0
+; horizontal_gradient_color_1 = '#c45161'
+; horizontal_gradient_color_2 = '#e094a0'
+; horizontal_gradient_color_3 = '#f2b6c0'
+; horizontal_gradient_color_4 = '#f2dde1'
+; horizontal_gradient_color_5 = '#cbc7d8'
+; horizontal_gradient_color_6 = '#8db7d2'
+; horizontal_gradient_color_7 = '#5e62a9'
+; horizontal_gradient_color_8 = '#434279'
+
+
+# If both vertical and horizontal gradient is enabled, vertical will be blended in this direction.
+# Can be 'up', 'down', 'left' or 'right'. 'up' means the vertical gradient will be blended in from
+# bottom to top. I.e. the bottom will be only the horizontal
+# and top will be only the color of the vertical gradient.
+; blend_direction = 'up'
+
+# use theme file instead of defining colors in this file
+# themes are located in $HOME/.config/cava/themes
+; theme = 'none'
+
+
+[smoothing]
+
+# Percentage value for integral smoothing. Takes values from 0 - 100.
+# Higher values means smoother, but less precise. 0 to disable.
+# DEPRECATED as of 0.8.0, use noise_reduction instead
+; integral = 77
+
+# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
+; monstercat = 0
+; waves = 0
+
+# Set gravity percentage for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
+# DEPRECATED as of 0.8.0, use noise_reduction instead
+; gravity = 100
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+# DEPRECATED as of 0.8.0
+; ignore = 0
+
+# Noise reduction, int 0 - 100. default 77
+# the raw visualization is very noisy, this factor adjusts the integral and gravity filters to keep the signal smooth
+# 100 will be very slow and smooth, 0 will be fast but noisy.
+; noise_reduction = 77
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more than one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+; 1 = 1 # bass
+; 2 = 1
+; 3 = 1 # midtone
+; 4 = 1
+; 5 = 1 # treble

airootfs/root/.config/cava/shaders/bar_spectrum.frag

@@ -0,0 +1,73 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;  // number of bars (left + right) (configurable)
+uniform int bar_width;   // bar width (configurable), not used here
+uniform int bar_spacing; // space between bars (configurable)
+
+uniform vec3 u_resolution; // window resolution
+
+// colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
+uniform vec3 bg_color; // background color
+uniform vec3 fg_color; // foreground color
+
+uniform int gradient_count;
+uniform vec3 gradient_colors[8]; // gradient colors
+
+uniform float shader_time; // shader execution time s (not used here)
+
+uniform sampler2D inputTexture; // Texture from the last render pass (not used here)
+
+vec3 normalize_C(float y, vec3 col_1, vec3 col_2, float y_min, float y_max) {
+    // create color based on fraction of this color and next color
+    float yr = (y - y_min) / (y_max - y_min);
+    return col_1 * (1.0 - yr) + col_2 * yr;
+}
+
+void main() {
+    // find which bar to use based on where we are on the x axis
+    float x = u_resolution.x * fragCoord.x;
+    int bar = int(bars_count * fragCoord.x);
+
+    // calculate a bar size
+    float bar_size = u_resolution.x / bars_count;
+
+    // the y coordinate and bar values are the same
+    float y = bars[bar];
+
+    // make sure there is a thin line at bottom
+    if (y * u_resolution.y < 1.0) {
+        y = 1.0 / u_resolution.y;
+    }
+
+    // draw the bar up to current height
+    if (y > fragCoord.y) {
+        // make some space between bars basen on settings
+        if (x > (bar + 1) * (bar_size)-bar_spacing) {
+            fragColor = vec4(bg_color, 1.0);
+        } else {
+            if (gradient_count == 0) {
+                fragColor = vec4(fg_color, 1.0);
+            } else {
+                // find which color in the configured gradient we are at
+                int color = int((gradient_count - 1) * fragCoord.y);
+
+                // find where on y this and next color is supposed to be
+                float y_min = color / (gradient_count - 1.0);
+                float y_max = (color + 1.0) / (gradient_count - 1.0);
+
+                // make color
+                fragColor = vec4(normalize_C(fragCoord.y, gradient_colors[color],
+                                             gradient_colors[color + 1], y_min, y_max),
+                                 1.0);
+            }
+        }
+    } else {
+        fragColor = vec4(bg_color, 1.0);
+    }
+}

airootfs/root/.config/cava/shaders/eye_of_phi.frag

@@ -0,0 +1,117 @@
+#version 330
+
+// this shader was stolen from shadertoy user ChunderFPV
+
+#define SCALE 8.0
+#define PI radians(180.0)
+#define TAU (PI * 2.0)
+#define CS(a) vec2(cos(a), sin(a))
+#define PT(u, r) smoothstep(0.0, r, r - length(u))
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+uniform float shader_time; // shader execution time s
+uniform int bar_width;     // bar width (configurable), not used here
+uniform int bar_spacing;   // space between bars (configurable)
+
+uniform vec3 u_resolution; // window resolution
+
+// colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
+uniform vec3 bg_color; // background color
+uniform vec3 fg_color; // foreground color
+
+uniform int gradient_count;
+uniform vec3 gradient_colors[8]; // gradient colors
+
+// gradient map ( color, equation, time, width, shadow, reciprocal )
+vec3 gm(vec3 c, float n, float t, float w, float d, bool i) {
+  float g = min(abs(n), 1.0 / abs(n));
+  float s = abs(sin(n * PI - t));
+  if (i)
+    s = min(s, abs(sin(PI / n + t)));
+  return (1.0 - pow(abs(s), w)) * c * pow(g, d) * 6.0;
+}
+
+// denominator spiral, use 1/n for numerator
+// ( screen xy, spiral exponent, decimal, line width, hardness, rotation )
+float ds(vec2 u, float e, float n, float w, float h, float ro) {
+  float ur = length(u);          // unit radius
+  float sr = pow(ur, e);         // spiral radius
+  float a = round(sr) * n * TAU; // arc
+  vec2 xy = CS(a + ro) * ur;     // xy coords
+  float l = PT(u - xy, w);       // line
+  float s = mod(sr + 0.5, 1.0);  // gradient smooth
+  s = min(s, 1.0 - s);           // darken filter
+  return l * s * h;
+}
+
+void main() {
+  float t = shader_time / PI * 2.0;
+  vec4 m = vec4(0, 0, 0, 0);                 // iMouse;
+  m.xy = m.xy * 2.0 / u_resolution.xy - 1.0; // ±1x, ±1y
+  if (m.z > 0.0)
+    t += m.y * SCALE; // move time with mouse y
+  float z = (m.z > 0.0) ? pow(1.0 - abs(m.y), sign(m.y)) : 1.0; // zoom (+)
+  float e = (m.z > 0.0) ? pow(1.0 - abs(m.x), -sign(m.x))
+                        : 1.0;                   // screen exponent (+)
+  float se = (m.z > 0.0) ? e * -sign(m.y) : 1.0; // spiral exponent
+  vec3 bg = vec3(0);                             // black background
+
+  float aa = 3.0; // anti-aliasing
+
+  for (float j = 0.0; j < aa; j++)
+    for (float k = 0.0; k < aa; k++) {
+      vec3 c = vec3(0);
+      vec2 o = vec2(j, k) / aa;
+      vec2 uv = (fragCoord * u_resolution.xy - 0.5 * u_resolution.xy + o) /
+                u_resolution.y * SCALE * z; // apply cartesian, scale and zoom
+      if (m.z > 0.0)
+        uv =
+            exp(log(abs(uv)) * e) * sign(uv); // warp screen space with exponent
+
+      float px = length(fwidth(uv)); // pixel width
+      float x = uv.x;                // every pixel on x
+      float y = uv.y;                // every pixel on y
+      float l = length(uv);          // hypot of xy: sqrt(x*x+y*y)
+
+      float mc = (x * x + y * y - 1.0) / y;  // metallic circle at xy
+      float g = min(abs(mc), 1.0 / abs(mc)); // gradient
+      vec3 gold = vec3(1.0, 0.6, 0.0) * g * l;
+      vec3 blue = vec3(0.3, 0.5, 0.9) * (1.0 - g);
+      vec3 rgb = max(gold, blue);
+
+      float w = 0.1;                                      // line width
+      float d = 0.4;                                      // shadow depth
+      c = max(c, gm(rgb, mc, -t, w * bars[0], d, false)); // metallic
+      c = max(c, gm(rgb, abs(y / x) * sign(y), -t, w * bars[1], d,
+                    false)); // tangent
+      c = max(c, gm(rgb, (x * x) / (y * y) * sign(y), -t, w * bars[2], d,
+                    false)); // sqrt cotangent
+      c = max(c, gm(rgb, (x * x) + (y * y), t, w * bars[3], d,
+                    true)); // sqrt circles
+
+      c += rgb * ds(uv, se, t / TAU, px * 2.0 * bars[4], 2.0, 0.0); // spiral 1a
+      c += rgb * ds(uv, se, t / TAU, px * 2.0 * bars[5], 2.0, PI);  // spiral 1b
+      c +=
+          rgb * ds(uv, -se, t / TAU, px * 2.0 * bars[6], 2.0, 0.0); // spiral 2a
+      c += rgb * ds(uv, -se, t / TAU, px * 2.0 * bars[7], 2.0, PI); // spiral 2b
+      c = max(c, 0.0); // clear negative color
+
+      c += pow(max(1.0 - l, 0.0), 3.0 / z); // center glow
+
+      if (m.z > 0.0) // display grid on click
+      {
+        vec2 xyg = abs(fract(uv + 0.5) - 0.5) / px; // xy grid
+        c.gb += 0.2 * (1.0 - min(min(xyg.x, xyg.y), 1.0));
+      }
+      bg += c;
+    }
+  bg /= aa * aa;
+  bg *= sqrt(bg) * 1.5;
+
+  fragColor = vec4(bg, 1.0);
+}

airootfs/root/.config/cava/shaders/northern_lights.frag

@@ -0,0 +1,34 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+
+uniform vec3 u_resolution; // window resolution, not used here
+
+//colors, configurable in cava config file
+uniform vec3 bg_color; // background color(r,g,b) (0.0 - 1.0), not used here
+uniform vec3 fg_color; // foreground color, not used here
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    int bar = int(bars_count * fragCoord.x);
+
+    float bar_y = 1.0 - abs((fragCoord.y - 0.5)) * 2.0;
+    float y = (bars[bar]) * bar_y;
+
+    float bar_x = (fragCoord.x - float(bar) / float(bars_count)) * bars_count;
+    float bar_r = 1.0 - abs((bar_x - 0.5)) * 2;
+
+    bar_r = bar_r * bar_r * 2;
+
+    // set color
+    fragColor.r = fg_color.x * y * bar_r;
+    fragColor.g = fg_color.y * y * bar_r;
+    fragColor.b = fg_color.z * y * bar_r;
+}

airootfs/root/.config/cava/shaders/pass_through.vert

@@ -0,0 +1,14 @@
+#version 330
+
+
+// Input vertex data, different for all executions of this shader.
+layout(location = 0) in vec3 vertexPosition_modelspace;
+
+// Output data ; will be interpolated for each fragment.
+out vec2 fragCoord;
+
+void main()
+{
+    gl_Position =  vec4(vertexPosition_modelspace,1);
+    fragCoord  = (vertexPosition_modelspace.xy+vec2(1,1))/2.0;
+}

airootfs/root/.config/cava/shaders/spectrogram.frag

@@ -0,0 +1,53 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high
+// to low).
+uniform float bars[512];
+
+uniform int bars_count;  // number of bars (left + right) (configurable)
+uniform int bar_width;   // bar width (configurable), not used here
+uniform int bar_spacing; // space between bars (configurable)
+
+uniform vec3 u_resolution; // window resolution
+
+// colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
+uniform vec3 bg_color; // background color
+uniform vec3 fg_color; // foreground color
+
+uniform int gradient_count;
+uniform vec3 gradient_colors[8]; // gradient colors
+
+uniform sampler2D inputTexture; // Texture from the last render pass
+
+vec3 normalize_C(float y, vec3 col_1, vec3 col_2, float y_min, float y_max) {
+    // create color based on fraction of this color and next color
+    float yr = (y - y_min) / (y_max - y_min);
+    return col_1 * (1.0 - yr) + col_2 * yr;
+}
+
+void main() {
+    // find which bar to use based on where we are on the y axis
+    int bar = int(bars_count * fragCoord.y);
+    float y = bars[bar];
+    float band_size = 1.0 / float(bars_count);
+    float current_band_min = bar * band_size;
+    float current_band_max = (bar + 1) * band_size;
+
+    int hist_length = 512;
+    float win_size = 1.0 / hist_length;
+
+    if (fragCoord.x > 1.0 - win_size) {
+
+        if (fragCoord.y > current_band_min && fragCoord.y < current_band_max) {
+
+            fragColor = vec4(fg_color * y, 1.0);
+        }
+    } else {
+        vec2 offsetCoord = fragCoord;
+        offsetCoord.x += float(win_size);
+        fragColor = texture(inputTexture, offsetCoord);
+    }
+}

airootfs/root/.config/cava/shaders/winamp_line_style_spectrum.frag

@@ -0,0 +1,112 @@
+#version 330
+
+// Emulate the "line style" spectrum analyzer from Winamp 2.
+// Try this config for a demonstration:
+
+/*
+[general]
+bar_width = 2
+bar_spacing = 0
+higher_cutoff_freq = 22000
+
+[output]
+method = sdl_glsl
+channels = mono
+fragment_shader = winamp_line_style_spectrum.frag
+
+[color]
+background = '#000000'
+gradient = 1
+gradient_color_1 = '#319C08'
+gradient_color_2 = '#29CE10'
+gradient_color_3 = '#BDDE29'
+gradient_color_4 = '#DEA518'
+gradient_color_5 = '#D66600'
+gradient_color_6 = '#CE2910'
+
+[smoothing]
+noise_reduction = 10
+*/
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+uniform int bar_width;    // bar width (configurable), not used here
+uniform int bar_spacing;    // space between bars (configurable)
+
+uniform vec3 u_resolution; // window resolution
+
+//colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
+uniform vec3 bg_color; // background color
+uniform vec3 fg_color; // foreground color
+
+uniform int gradient_count;
+uniform vec3 gradient_colors[8]; // gradient colors
+
+vec3 normalize_C(float y,vec3 col_1, vec3 col_2, float y_min, float y_max)
+{
+    //create color based on fraction of this color and next color
+    float yr = (y - y_min) / (y_max - y_min);
+    return col_1 * (1.0 - yr) + col_2 * yr;
+}
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    float x = u_resolution.x * fragCoord.x;
+    int bar = int(bars_count * fragCoord.x);
+
+    //calculate a bar size
+    float bar_size = u_resolution.x / bars_count;
+
+    //the y coordinate is stretched by 4X to resemble Winamp
+    float y =  min(bars[bar] * 4.0, 1.0);
+
+    // make sure there is a thin line at bottom
+    if (y * u_resolution.y < 1.0)
+    {
+      y = 1.0 / u_resolution.y;
+    }
+
+    vec4 bar_color;
+
+    if (gradient_count == 0)
+    {
+        bar_color = vec4(fg_color,1.0);
+    }
+    else
+    {
+        //find color in the configured gradient for the top of the bar
+        int color = int((gradient_count - 1) * y);
+
+        //find where on y this and next color is supposed to be
+        float y_min = float(color) / (gradient_count - 1.0);
+        float y_max = float(color + 1) / (gradient_count - 1.0);
+
+        //make a solid color for the entire bar
+        bar_color = vec4(normalize_C(y, gradient_colors[color], gradient_colors[color + 1], y_min, y_max), 1.0);
+    }
+
+
+    //draw the bar up to current height
+    if (y > fragCoord.y)
+    {
+        //make some space between bars based on settings
+        if (x > (bar + 1) * (bar_size) - bar_spacing)
+        {
+            fragColor = vec4(bg_color,1.0);
+        }
+        else
+        {
+            fragColor = bar_color;
+        }
+    }
+    else
+    {
+        fragColor = vec4(bg_color,1.0);
+    }
+}

airootfs/root/.config/cava/themes/solarized_dark

@@ -0,0 +1,15 @@
+[color]
+background = '#001e26'
+foreground = '#708183'
+
+gradient = 1
+gradient_color_1 = '#268bd2'
+gradient_color_2 = '#6c71c4'
+gradient_color_3 = '#cb4b16'
+
+horizontal_gradient = 1
+horizontal_gradient_color_1 = '#586e75'
+horizontal_gradient_color_2 = '#b58900'
+horizontal_gradient_color_3 = '#839496'
+
+blend_direction = 'up'

airootfs/root/.config/cava/themes/tricolor

@@ -0,0 +1,10 @@
+[color]
+horizontal_gradient = 1
+horizontal_gradient_color_1 = '#c45161'
+horizontal_gradient_color_2 = '#e094a0'
+horizontal_gradient_color_3 = '#f2b6c0'
+horizontal_gradient_color_4 = '#f2dde1'
+horizontal_gradient_color_5 = '#cbc7d8'
+horizontal_gradient_color_6 = '#8db7d2'
+horizontal_gradient_color_7 = '#5e62a9'
+horizontal_gradient_color_8 = '#434279'

airootfs/root/.config/fastfetch/about.txt

@@ -0,0 +1,19 @@
+                   -`
+                  .o+`
+                 `ooo/
+                `+oooo:
+               `+oooooo:
+               -+oooooo+:
+             `/:-:++oooo+:
+            `/++++/+++++++:
+           `/++++++++++++++:
+          `/+++ooooooooooooo/`
+         ./ooosssso++osssssso+`
+        .oossssso-````/ossssss+`
+       -osssssso.      :ssssssso.
+      :osssssss/        osssso+++.
+     /ossssssss/        +ssssooo/-
+   `/ossssso+/:-        -:/+osssso+-
+  `+sso+:-`                 `.-/+oso:
+ `++:.                           `-/+/
+ .`                                 `

airootfs/root/.config/fastfetch/config.jsonc

@@ -0,0 +1,147 @@
+{
+  "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
+  "logo": {
+    "type": "file",
+    "source": "~/.config/fastfetch/about.txt",
+    "color": { "1": "blue" },
+    "padding": {
+      "top": 2,
+      "right": 6,
+      "left": 2
+    }
+  },
+  "modules": [
+    "break",
+    {
+      "type": "custom",
+      "format": "\u001b[90m┌──────────────────────Hardware──────────────────────┐"
+    },
+    {
+      "type": "host",
+      "key": " PC",
+      "keyColor": "green"
+    },
+    {
+      "type": "cpu",
+      "key": "│ ├",
+      "showPeCoreCount": true,
+      "keyColor": "green"
+    },
+    {
+      "type": "gpu",
+      "key": "│ ├",
+      "detectionMethod": "pci",
+      "keyColor": "green"
+    },
+    {
+      "type": "display",
+      "key": "│ ├󱄄",
+      "keyColor": "green"
+    },
+    {
+      "type": "disk",
+      "key": "│ ├󰋊",
+      "keyColor": "green"
+    },
+    {
+      "type": "memory",
+      "key": "│ ├",
+      "keyColor": "green"
+    },
+    {
+      "type": "swap",
+      "key": "└ └󰓡",
+      "keyColor": "green"
+    },
+    {
+      "type": "custom",
+      "format": "\u001b[90m└────────────────────────────────────────────────────┘"
+    },
+
+    "break",
+
+    {
+      "type": "custom",
+      "format": "\u001b[90m┌──────────────────────Software──────────────────────┐"
+    },
+    {
+      "type": "os",
+      "key": "󰣇 OS",
+      "keyColor": "blue"
+    },
+    {
+      "type": "kernel",
+      "key": "│ ├",
+      "keyColor": "blue"
+    },
+    {
+      "type": "wm",
+      "key": "│ ├",
+      "keyColor": "blue"
+    },
+    {
+      "type": "shell",
+      "key": "│ ├󰆍",
+      "keyColor": "blue"
+    },
+    {
+      "type": "terminal",
+      "key": "│ ├",
+      "keyColor": "blue"
+    },
+    {
+      "type": "packages",
+      "key": "│ ├󰏖",
+      "keyColor": "blue"
+    },
+    {
+      "type": "wmtheme",
+      "key": "│ ├󰉼",
+      "keyColor": "blue"
+    },
+    {
+      "type": "theme",
+      "key": "│ ├󰸌",
+      "keyColor": "blue"
+    },
+    {
+      "type": "terminalfont",
+      "key": "└ └",
+      "keyColor": "blue"
+    },
+    {
+      "type": "custom",
+      "format": "\u001b[90m└────────────────────────────────────────────────────┘"
+    },
+
+    "break",
+
+    {
+      "type": "custom",
+      "format": "\u001b[90m┌────────────────Age / Uptime / Update───────────────┐"
+    },
+    {
+      "type": "command",
+      "key": "󱦟 OS Age",
+      "keyColor": "magenta",
+      "text": "echo $(( ($(date +%s) - $(stat -c %W /)) / 86400 )) days"
+    },
+    {
+      "type": "uptime",
+      "key": "󱫐 Uptime",
+      "keyColor": "magenta"
+    },
+    {
+      "type": "command",
+      "key": " Updates",
+      "keyColor": "magenta",
+      "text": "checkupdates 2>/dev/null | wc -l"
+    },
+    {
+      "type": "custom",
+      "format": "\u001b[90m└────────────────────────────────────────────────────┘"
+    },
+
+    "break"
+  ]
+}

airootfs/root/.config/ghostty/config

@@ -0,0 +1,58 @@
+# Background and foreground colors
+background = #1e1e2e
+foreground = #cdd6f4
+
+# Standard colors
+palette = 0=#45475a
+palette = 1=#f38ba8
+palette = 2=#a6e3a1
+palette = 3=#f9e2af
+palette = 4=#89b4fa
+palette = 5=#cba6f7
+palette = 6=#94e2d5
+palette = 7=#bac2de
+
+# Bright colors
+palette = 8=#585b70
+palette = 9=#f38ba8
+palette = 10=#a6e3a1
+palette = 11=#f9e2af
+palette = 12=#89b4fa
+palette = 13=#cba6f7
+palette = 14=#94e2d5
+palette = 15=#cdd6f4
+
+# Font
+font-family = "JetBrainsMono Nerd Font"
+font-style = Regular
+font-size = 9
+
+# Window
+window-theme = ghostty
+window-padding-x = 14
+window-padding-y = 14
+confirm-close-surface=false
+resize-overlay = never
+gtk-toolbar-style = flat
+
+# Cursor styling
+cursor-style = "block"
+cursor-style-blink = false
+
+# Cursor styling + SSH session terminfo
+# (all shell integration options must be passed together)
+shell-integration-features = no-cursor,ssh-env
+
+# Keyboard bindings
+keybind = shift+insert=paste_from_clipboard
+keybind = control+insert=copy_to_clipboard
+keybind = super+control+shift+alt+arrow_down=resize_split:down,100
+keybind = super+control+shift+alt+arrow_up=resize_split:up,100
+keybind = super+control+shift+alt+arrow_left=resize_split:left,100
+keybind = super+control+shift+alt+arrow_right=resize_split:right,100
+
+# Slowdown mouse scrolling
+mouse-scroll-multiplier = 0.95
+
+# Fix general slowness on hyprland (https://github.com/ghostty-org/ghostty/discussions/3224)
+async-backend = epoll

airootfs/root/.config/hypr/hyprland.lua

@@ -0,0 +1,355 @@
+-- Refer to the wiki for more information.
+-- https://wiki.hypr.land/Configuring/Start/
+
+-- Please note not all available settings / options are set here.
+-- For a full list, see the wiki
+
+-- You can (and should!!) split this configuration into multiple files
+-- Create your files separately and then require them like this:
+-- require("myColors")
+
+
+------------------
+---- MONITORS ----
+------------------
+
+-- See https://wiki.hypr.land/Configuring/Basics/Monitors/
+hl.monitor({
+    output   = "",
+    mode     = "preferred",
+    position = "auto",
+    scale    = "auto",
+})
+
+
+---------------------
+---- MY PROGRAMS ----
+---------------------
+
+-- Set programs that you use
+local terminal    = "ghostty"
+local fileManager = "yazi"
+local menu        = "rofi -show drun"
+
+
+-------------------
+---- AUTOSTART ----
+-------------------
+
+-- See https://wiki.hypr.land/Configuring/Basics/Autostart/
+
+-- Autostart necessary processes (like notifications daemons, status bars, etc.)
+-- Or execute your favorite apps at launch like this:
+--
+hl.on("hyprland.start", function () 
+--hl.exec_cmd("hyprpaper")
+  hl.exec_cmd("waybar")
+end)
+
+
+-------------------------------
+---- ENVIRONMENT VARIABLES ----
+-------------------------------
+
+-- See https://wiki.hypr.land/Configuring/Advanced-and-Cool/Environment-variables/
+
+hl.env("XCURSOR_SIZE", "24")
+hl.env("HYPRCURSOR_SIZE", "24")
+
+
+-----------------------
+----- PERMISSIONS -----
+-----------------------
+
+-- See https://wiki.hypr.land/Configuring/Advanced-and-Cool/Permissions/
+-- Please note permission changes here require a Hyprland restart and are not applied on-the-fly
+-- for security reasons
+
+-- hl.config({
+--   ecosystem = {
+--     enforce_permissions = true,
+--   },
+-- })
+
+-- hl.permission("/usr/(bin|local/bin)/grim", "screencopy", "allow")
+-- hl.permission("/usr/(lib|libexec|lib64)/xdg-desktop-portal-hyprland", "screencopy", "allow")
+-- hl.permission("/usr/(bin|local/bin)/hyprpm", "plugin", "allow")
+
+
+-----------------------
+---- LOOK AND FEEL ----
+-----------------------
+
+-- Refer to https://wiki.hypr.land/Configuring/Basics/Variables/
+hl.config({
+    general = {
+        gaps_in  = 2,
+        gaps_out = 4,
+
+        border_size = 2,
+
+        col = {
+            active_border   = "rgb(303463)",
+            inactive_border = "rgb(1a1b26)",
+        },
+
+        -- Set to true to enable resizing windows by clicking and dragging on borders and gaps
+        resize_on_border = false,
+
+        -- Please see https://wiki.hypr.land/Configuring/Advanced-and-Cool/Tearing/ before you turn this on
+        allow_tearing = false,
+
+        layout = "dwindle",
+    },
+
+    decoration = {
+        rounding       = 14,
+        rounding_power = 5,
+
+        -- Change transparency of focused and unfocused windows
+        active_opacity     = 0.93,
+        inactive_opacity   = 0.92,
+        fullscreen_opacity = 1.0,
+
+        shadow = {
+            enabled      = false,
+            range        = 15,
+            render_power = 5,
+            color        = 0xee1a1a1a,
+        },
+
+        blur = {
+            enabled   = true,
+            size      = 1,
+            passes    = 4,
+            vibrancy  = 0.2,
+        },
+    },
+
+    animations = {
+        enabled = true,
+    },
+})
+
+-- Default curves and animations, see https://wiki.hypr.land/Configuring/Advanced-and-Cool/Animations/
+hl.curve("easeOutQuint",   { type = "bezier", points = { {0.23, 1},    {0.32, 1}    } })
+hl.curve("easeInOutCubic", { type = "bezier", points = { {0.65, 0.05}, {0.36, 1}    } })
+hl.curve("linear",         { type = "bezier", points = { {0, 0},       {1, 1}       } })
+hl.curve("almostLinear",   { type = "bezier", points = { {0.5, 0.5},   {0.75, 1}    } })
+hl.curve("quick",          { type = "bezier", points = { {0.15, 0},    {0.1, 1}     } })
+
+-- Default springs
+hl.curve("easy",           { type = "spring", mass = 1, stiffness = 71.2633, dampening = 15.8273644 })
+
+hl.animation({ leaf = "global",        enabled = true,  speed = 10,   bezier = "default" })
+hl.animation({ leaf = "border",        enabled = true,  speed = 5.39, bezier = "easeOutQuint" })
+hl.animation({ leaf = "windows",       enabled = true,  speed = 4.79, spring = "easy" })
+hl.animation({ leaf = "windowsIn",     enabled = true,  speed = 4.1,  spring = "easy",         style = "popin 87%" })
+hl.animation({ leaf = "windowsOut",    enabled = true,  speed = 1.49, bezier = "linear",       style = "popin 87%" })
+hl.animation({ leaf = "fadeIn",        enabled = true,  speed = 1.73, bezier = "almostLinear" })
+hl.animation({ leaf = "fadeOut",       enabled = true,  speed = 1.46, bezier = "almostLinear" })
+hl.animation({ leaf = "fade",          enabled = true,  speed = 3.03, bezier = "quick" })
+hl.animation({ leaf = "layers",        enabled = true,  speed = 3.81, bezier = "easeOutQuint" })
+hl.animation({ leaf = "layersIn",      enabled = true,  speed = 4,    bezier = "easeOutQuint", style = "fade" })
+hl.animation({ leaf = "layersOut",     enabled = true,  speed = 1.5,  bezier = "linear",       style = "fade" })
+hl.animation({ leaf = "fadeLayersIn",  enabled = true,  speed = 1.79, bezier = "almostLinear" })
+hl.animation({ leaf = "fadeLayersOut", enabled = true,  speed = 1.39, bezier = "almostLinear" })
+hl.animation({ leaf = "workspaces",    enabled = true,  speed = 1.94, bezier = "almostLinear", style = "fade" })
+hl.animation({ leaf = "workspacesIn",  enabled = true,  speed = 1.21, bezier = "almostLinear", style = "fade" })
+hl.animation({ leaf = "workspacesOut", enabled = true,  speed = 1.94, bezier = "almostLinear", style = "fade" })
+hl.animation({ leaf = "zoomFactor",    enabled = true,  speed = 7,    bezier = "quick" })
+
+-- Ref https://wiki.hypr.land/Configuring/Basics/Workspace-Rules/
+-- "Smart gaps" / "No gaps when only"
+-- uncomment all if you wish to use that.
+-- hl.workspace_rule({ workspace = "w[tv1]", gaps_out = 0, gaps_in = 0 })
+-- hl.workspace_rule({ workspace = "f[1]",   gaps_out = 0, gaps_in = 0 })
+-- hl.window_rule({
+--     name  = "no-gaps-wtv1",
+--     match = { float = false, workspace = "w[tv1]" },
+--     border_size = 0,
+--     rounding    = 0,
+-- })
+-- hl.window_rule({
+--     name  = "no-gaps-f1",
+--     match = { float = false, workspace = "f[1]" },
+--     border_size = 0,
+--     rounding    = 0,
+-- })
+
+-- See https://wiki.hypr.land/Configuring/Layouts/Dwindle-Layout/ for more
+hl.config({
+    dwindle = {
+        preserve_split = true, -- You probably want this
+    },
+})
+
+-- See https://wiki.hypr.land/Configuring/Layouts/Master-Layout/ for more
+hl.config({
+    master = {
+        new_status = "master",
+    },
+})
+
+-- See https://wiki.hypr.land/Configuring/Layouts/Scrolling-Layout/ for more
+hl.config({
+    scrolling = {
+        fullscreen_on_one_column = true,
+    },
+})
+
+----------------
+----  MISC  ----
+----------------
+
+hl.config({
+    misc = {
+        force_default_wallpaper = -1,    -- Set to 0 or 1 to disable the anime mascot wallpapers
+        disable_hyprland_logo   = false, -- If true disables the random hyprland logo / anime girl background. :(
+    },
+})
+
+
+---------------
+---- INPUT ----
+---------------
+
+hl.config({
+    input = {
+        kb_layout  = "fr",
+        kb_variant = "",
+        kb_model   = "",
+        kb_options = "",
+        kb_rules   = "",
+
+        follow_mouse = 1,
+
+        sensitivity = 0, -- -1.0 - 1.0, 0 means no modification.
+
+        touchpad = {
+            natural_scroll = false,
+        },
+    },
+})
+
+hl.gesture({
+    fingers = 3,
+    direction = "horizontal",
+    action = "workspace"
+})
+
+-- Example per-device config
+-- See https://wiki.hypr.land/Configuring/Advanced-and-Cool/Devices/ for more
+hl.device({
+    name        = "epic-mouse-v1",
+    sensitivity = -0.5,
+})
+
+
+---------------------
+---- KEYBINDINGS ----
+---------------------
+
+local mainMod = "SUPER" -- Sets "Windows" key as main modifier
+
+-- Example binds, see https://wiki.hypr.land/Configuring/Basics/Binds/ for more
+hl.bind(mainMod .. " + Return", hl.dsp.exec_cmd(terminal))
+local closeWindowBind = hl.bind(mainMod .. " + W", hl.dsp.window.close())
+-- closeWindowBind:set_enabled(false)
+hl.bind(mainMod .. " + M", hl.dsp.exec_cmd("command -v hyprshutdown >/dev/null 2>&1 && hyprshutdown || hyprctl dispatch 'hl.dsp.exit()'"))
+hl.bind(mainMod .. " + F", hl.dsp.exec_cmd(fileManager))
+hl.bind(mainMod .. " + T", hl.dsp.window.float({ action = "toggle" }))
+hl.bind(mainMod .. " + SPACE", hl.dsp.exec_cmd(menu))
+hl.bind(mainMod .. " + P", hl.dsp.window.pseudo())
+hl.bind(mainMod .. " + J", hl.dsp.layout("togglesplit"))    -- dwindle only
+
+-- Move focus with mainMod + arrow keys
+hl.bind(mainMod .. " + left",  hl.dsp.focus({ direction = "left" }))
+hl.bind(mainMod .. " + right", hl.dsp.focus({ direction = "right" }))
+hl.bind(mainMod .. " + up",    hl.dsp.focus({ direction = "up" }))
+hl.bind(mainMod .. " + down",  hl.dsp.focus({ direction = "down" }))
+
+-- Switch workspaces with mainMod + [0-9]
+-- Move active window to a workspace with mainMod + SHIFT + [0-9]
+for i = 1, 10 do
+    local key = i % 10 -- 10 maps to key 0
+    hl.bind(mainMod .. " + " .. key,             hl.dsp.focus({ workspace = i}))
+    hl.bind(mainMod .. " + SHIFT + " .. key,     hl.dsp.window.move({ workspace = i }))
+end
+
+-- Example special workspace (scratchpad)
+hl.bind(mainMod .. " + S",         hl.dsp.workspace.toggle_special("magic"))
+hl.bind(mainMod .. " + SHIFT + S", hl.dsp.window.move({ workspace = "special:magic" }))
+
+-- Scroll through existing workspaces with mainMod + scroll
+hl.bind(mainMod .. " + mouse_down", hl.dsp.focus({ workspace = "e+1" }))
+hl.bind(mainMod .. " + mouse_up",   hl.dsp.focus({ workspace = "e-1" }))
+
+-- Move/resize windows with mainMod + LMB/RMB and dragging
+hl.bind(mainMod .. " + mouse:272", hl.dsp.window.drag(),   { mouse = true })
+hl.bind(mainMod .. " + mouse:273", hl.dsp.window.resize(), { mouse = true })
+
+-- Laptop multimedia keys for volume and LCD brightness
+hl.bind("XF86AudioRaiseVolume", hl.dsp.exec_cmd("wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 5%+"), { locked = true, repeating = true })
+hl.bind("XF86AudioLowerVolume", hl.dsp.exec_cmd("wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-"),      { locked = true, repeating = true })
+hl.bind("XF86AudioMute",        hl.dsp.exec_cmd("wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"),     { locked = true, repeating = true })
+hl.bind("XF86AudioMicMute",     hl.dsp.exec_cmd("wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"),   { locked = true, repeating = true })
+hl.bind("XF86MonBrightnessUp",  hl.dsp.exec_cmd("brightnessctl -e4 -n2 set 5%+"),                  { locked = true, repeating = true })
+hl.bind("XF86MonBrightnessDown",hl.dsp.exec_cmd("brightnessctl -e4 -n2 set 5%-"),                  { locked = true, repeating = true })
+
+-- Requires playerctl
+hl.bind("XF86AudioNext",  hl.dsp.exec_cmd("playerctl next"),       { locked = true })
+hl.bind("XF86AudioPause", hl.dsp.exec_cmd("playerctl play-pause"), { locked = true })
+hl.bind("XF86AudioPlay",  hl.dsp.exec_cmd("playerctl play-pause"), { locked = true })
+hl.bind("XF86AudioPrev",  hl.dsp.exec_cmd("playerctl previous"),   { locked = true })
+
+
+--------------------------------
+---- WINDOWS AND WORKSPACES ----
+--------------------------------
+
+-- See https://wiki.hypr.land/Configuring/Basics/Window-Rules/
+-- and https://wiki.hypr.land/Configuring/Basics/Workspace-Rules/
+
+-- Example window rules that are useful
+
+local suppressMaximizeRule = hl.window_rule({
+    -- Ignore maximize requests from all apps. You'll probably like this.
+    name  = "suppress-maximize-events",
+    match = { class = ".*" },
+
+    suppress_event = "maximize",
+})
+-- suppressMaximizeRule:set_enabled(false)
+
+hl.window_rule({
+    -- Fix some dragging issues with XWayland
+    name  = "fix-xwayland-drags",
+    match = {
+        class      = "^$",
+        title      = "^$",
+        xwayland   = true,
+        float      = true,
+        fullscreen = false,
+        pin        = false,
+    },
+
+    no_focus = true,
+})
+
+-- Layer rules also return a handle.
+-- local overlayLayerRule = hl.layer_rule({
+--     name  = "no-anim-overlay",
+--     match = { namespace = "^my-overlay$" },
+--     no_anim = true,
+-- })
+-- overlayLayerRule:set_enabled(false)
+
+-- Hyprland-run windowrule
+hl.window_rule({
+    name  = "move-hyprland-run",
+    match = { class = "hyprland-run" },
+
+    move  = "20 monitor_h-120",
+    float = true,
+})

airootfs/root/.config/obsidian/obsidian.css

@@ -0,0 +1,99 @@
+/* Theme for Obsidian */
+
+.theme-dark, .theme-light {
+  /* Core colors */
+  --background-primary: #1e1e2e;
+  --background-primary-alt: #1e1e2e;
+  --background-secondary: #1e1e2e;
+  --background-secondary-alt: #1e1e2e;
+  --text-normal: #cdd6f4;
+
+  /* Selection colors */
+  --text-selection: #292b3b;
+
+  /* Border color */
+  --background-modifier-border: #585b70;
+
+  /* Semantic heading colors */
+  --text-title-h1: #f38ba8;
+  --text-title-h2: #a6e3a1;
+  --text-title-h3: #f9e2af;
+  --text-title-h4: #89b4fa;
+  --text-title-h5: #cba6f7;
+  --text-title-h6: #cba6f7;
+
+  /* Links and accents */
+  --text-link: #89b4fa;
+  --text-accent: #89b4fa;
+  --text-accent-hover: #89b4fa;
+  --interactive-accent: #89b4fa;
+  --interactive-accent-hover: #89b4fa;
+
+  /* Muted text */
+  --text-muted: color-mix(in srgb, #cdd6f4 70%, transparent);
+  --text-faint: color-mix(in srgb, #cdd6f4 55%, transparent);
+
+  /* Code */
+  --code-normal: #94e2d5;
+
+  /* Errors and success */
+  --text-error: #f38ba8;
+  --text-error-hover: #f38ba8;
+  --text-success: #a6e3a1;
+
+  /* Tags */
+  --tag-color: #94e2d5;
+  --tag-background: #585b70;
+
+  /* Graph */
+  --graph-line: #585b70;
+  --graph-node: #89b4fa;
+  --graph-node-focused: #89b4fa;
+  --graph-node-tag: #94e2d5;
+  --graph-node-attachment: #a6e3a1;
+}
+
+/* Headers */
+.cm-header-1, .markdown-rendered h1 { color: var(--text-title-h1); }
+.cm-header-2, .markdown-rendered h2 { color: var(--text-title-h2); }
+.cm-header-3, .markdown-rendered h3 { color: var(--text-title-h3); }
+.cm-header-4, .markdown-rendered h4 { color: var(--text-title-h4); }
+.cm-header-5, .markdown-rendered h5 { color: var(--text-title-h5); }
+.cm-header-6, .markdown-rendered h6 { color: var(--text-title-h6); }
+
+/* Code blocks */
+.markdown-rendered code {
+  color: #94e2d5;
+}
+
+/* Syntax highlighting */
+.cm-s-obsidian span.cm-keyword { color: #f38ba8; }
+.cm-s-obsidian span.cm-string { color: #a6e3a1; }
+.cm-s-obsidian span.cm-number { color: #f9e2af; }
+.cm-s-obsidian span.cm-comment { color: #585b70; }
+.cm-s-obsidian span.cm-operator { color: #89b4fa; }
+.cm-s-obsidian span.cm-def { color: #89b4fa; }
+
+/* Links */
+.markdown-rendered a {
+  color: var(--text-link);
+}
+
+/* Blockquotes */
+.markdown-rendered blockquote {
+  border-left-color: #89b4fa;
+}
+
+/* Active elements */
+.workspace-leaf.mod-active .workspace-leaf-header-title {
+  color: var(--interactive-accent);
+}
+
+.nav-file-title.is-active {
+  color: var(--interactive-accent);
+}
+
+/* Search results */
+.search-result-file-title {
+  color: var(--interactive-accent);
+}

airootfs/root/.config/obsidian/user-flags.conf

@@ -0,0 +1,3 @@
+# Obsidian reads this file through the Arch package wrapper.
+-disable-gpu
+--enable-wayland-ime

airootfs/root/.config/waybar/clock.sh

@@ -0,0 +1,38 @@
+#!/usr/bin/env bash
+
+print_status() {
+  time=$(date +"%H:%M")
+  date=$(date +"%d/%m")
+
+  # tooltip complet
+  full_date=$(date +"%A %d %B %Y %H:%M:%S")
+  calendar=$(cal -m)
+  esc_calendar=$(sed 's/&/&amp;/g; s/</&lt;/g; s/>/&gt;/g' <<< "$calendar")
+
+  text="$time
+$date"
+
+    tooltip="$full_date
+
+$esc_calendar"
+
+  jq -nc \
+     --arg text "$text" \
+     --arg tooltip "$tooltip" \
+     '{ text: $text, tooltip: $tooltip }'
+}
+
+print_status
+
+last=""
+
+while true; do
+  current=$(date +"%H%M%S%Y%m%d")
+
+  if [[ "$current" != "$last" ]]; then
+    print_status
+    last="$current"
+  fi
+
+  sleep 1
+done

airootfs/root/.config/waybar/config.jsonc

@@ -0,0 +1,139 @@
+{
+  "reload_style_on_change": true,
+  "layer": "top",
+  "position": "left",
+  "spacing": 0,
+  "width": 35,
+  "modules-left": ["custom/clock", "cpu", "memory", "custom/media"],
+  "modules-center": ["hyprland/workspaces"],
+  "modules-right": ["group/tray-expander", "pulseaudio", "bluetooth", "network", "battery"],
+  "hyprland/workspaces": {
+    "on-click": "activate",
+    "format": "{icon}",
+    "format-icons": {
+      "default": "",
+      "1": "1",
+      "2": "2",
+      "3": "3",
+      "4": "4",
+      "5": "5",
+      "6": "6",
+      "7": "7",
+      "8": "8",
+      "9": "9",
+      "10": "0",
+      "active": "󱓻"
+    },
+    "persistent-workspaces": {
+      "1": [],
+      "2": [],
+      "3": [],
+      "4": [],
+      "5": [],
+      "6": [],
+      "7": [],
+      "8": [],
+      "9": [],
+      "10": []
+    }
+  },
+  "cpu": {
+    "interval": 2,
+    "format": "{icon} ",
+    "format-icons": ["󰪞", "󰪟", "󰪠", "󰪡", "󰪢", "󰪣", "󰪤", "󰪥"],
+    "on-click": "btop"
+  },
+  "memory": {
+    "interval": 2,
+    "format": "{icon} ",
+    "format-icons": ["󰪞", "󰪟", "󰪠", "󰪡", "󰪢", "󰪣", "󰪤", "󰪥"],
+    "on-click": "btop"
+  },
+  "custom/clock": {
+    "exec": "~/.config/waybar/clock.sh",
+    "return-type": "json",
+    "tooltip": true
+  },
+  "custom/media": {
+    "exec": "~/.config/waybar/media.sh",
+    "return-type": "json",
+    "interval": 1,
+    "on-click": "~/.config/waybar/media_click.sh",
+    "on-click-right": "playerctl -p subtui next",
+    "on-click-middle": "playerctl -p subtui previous",
+    "tooltip": true
+  },
+  "network": {
+    "format-icons": ["󰤯", "󰤟", "󰤢", "󰤥", "󰤨"],
+    "format": "{icon}",
+    "format-wifi": "{icon}",
+    "format-ethernet": "󰀂",
+    "format-disconnected": "󰤮",
+    "tooltip-format-wifi": "{essid} ({frequency} GHz)",
+    "tooltip-format-ethernet": "Connected",
+    "tooltip-format-disconnected": "Disconnected",
+    "interval": 3,
+    "spacing": 1,
+    "on-click": "impala"
+  },
+  "battery": {
+    "format": "{capacity}% {icon}",
+    "format-discharging": "{icon}",
+    "format-charging": "{icon}",
+    "format-plugged": "",
+    "format-icons": {
+      "charging": ["󰢜", "󰂆", "󰂇", "󰂈", "󰢝", "󰂉", "󰢞", "󰂊", "󰂋", "󰂅"],
+      "default": ["󰁺", "󰁻", "󰁼", "󰁽", "󰁾", "󰁿", "󰂀", "󰂁", "󰂂", "󰁹"]
+    },
+    "format-full": "󰂅",
+    "tooltip-format-discharging": "{power:>1.0f}W↓ {capacity}%",
+    "tooltip-format-charging": "{power:>1.0f}W↑ {capacity}%",
+    "interval": 5,
+    "states": {
+      "warning": 20,
+      "critical": 10
+    }
+  },
+  "bluetooth": {
+    "format": "",
+    "format-off": "󰂲",
+    "format-disabled": "󰂲",
+    "format-connected": "󰂱",
+    "format-no-controller": "",
+    "tooltip-format": "Devices connected: {num_connections}",
+    "on-click": "bluetui"
+  },
+  "pulseaudio": {
+    "format": "{icon}",
+    "on-click": "wiremix",
+    "on-click-right": "pamixer -t",
+    "tooltip-format": "Playing at {volume}%",
+    "scroll-step": 5,
+    "format-muted": "",
+    "format-icons": {
+      "headphone": "",
+      "headset": "",
+      "default": ["", "", ""]
+    }
+  },
+  "group/tray-expander": {
+    "orientation": "inherit",
+    "drawer": {
+      "transition-duration": 600,
+      "children-class": "tray-group-item"
+    },
+    "modules": ["custom/expand-icon", "tray"]
+  },
+  "custom/expand-icon": {
+    "format": "",
+    "tooltip": false,
+    "on-scroll-up": "",
+    "on-scroll-down": "",
+    "on-scroll-left": "",
+    "on-scroll-right": ""
+  },
+  "tray": {
+    "icon-size": 12,
+    "spacing": 17
+  }
+}

airootfs/root/.config/waybar/media.sh

@@ -0,0 +1,71 @@
+#!/bin/bash
+
+PLAYER="subtui"
+
+# Vérifie si Subtui est lancé
+if ! playerctl -l 2>/dev/null | grep -q "^${PLAYER}$"; then
+  echo '{"text":"󰝚","tooltip":"Subtui non lancé"}'
+  exit 0
+fi
+
+# Métadonnées
+title=$(playerctl -p "$PLAYER" metadata title 2>/dev/null)
+artist=$(playerctl -p "$PLAYER" metadata artist 2>/dev/null)
+album=$(playerctl -p "$PLAYER" metadata album 2>/dev/null)
+status=$(playerctl -p "$PLAYER" status 2>/dev/null)
+
+# Valeurs par défaut
+[ -z "$title" ] && title="Titre inconnu"
+[ -z "$artist" ] && artist="Artiste inconnu"
+[ -z "$album" ] && album="Album inconnu"
+
+# Position actuelle (secondes)
+position=$(playerctl -p "$PLAYER" position 2>/dev/null)
+[ -z "$position" ] && position=0
+
+# Durée totale (microsecondes)
+length=$(playerctl -p "$PLAYER" metadata mpris:length 2>/dev/null)
+[ -z "$length" ] && length=0
+
+# Conversion sûre
+position_sec=$(awk -v p="$position" 'BEGIN { printf("%d", p+0.5) }')
+length_sec=$((length / 1000000))
+
+# Format temps
+elapsed=$(printf "%02d:%02d" $((position_sec/60)) $((position_sec%60)))
+
+if [ "$length_sec" -gt 0 ]; then
+  duration=$(printf "%02d:%02d" $((length_sec/60)) $((length_sec%60)))
+else
+  duration="--:--"
+fi
+
+# Icône
+if [ "$status" = "Playing" ]; then
+  icon="󰏤"
+else
+  icon="󰐊"
+fi
+
+# Échapper les guillemets pour JSON
+title=${title//\"/\\\"}
+artist=${artist//\"/\\\"}
+album=${album//\"/\\\"}
+
+# Tooltip
+tooltip="$artist
+$title
+
+Album : $album
+
+$elapsed / $duration
+
+Clic gauche : Lecture/Pause
+Clic droit : Suivant
+Clic milieu : Précédent"
+
+# Convertir les retours à la ligne pour JSON
+tooltip=$(echo "$tooltip" | sed ':a;N;$!ba;s/\n/\\n/g')
+
+# JSON final
+printf '{"text":"%s","tooltip":"%s"}\n' "$icon" "$tooltip"

airootfs/root/.config/waybar/media_click.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+PLAYER="subtui"
+
+if playerctl -l 2>/dev/null | grep -q "^${PLAYER}$"; then
+  playerctl -p "$PLAYER" play-pause
+else
+  ghostty -e subtui &
+fi

airootfs/root/.config/waybar/style.css

@@ -0,0 +1,109 @@
+* {
+  background-color: black;
+  color: white;
+  border: none;
+  border-radius: 0;
+  min-height: 0;
+  font-family: 'JetBrainsMono Nerd Font';
+  font-size: 12px;
+}
+
+.modules-left {
+  margin-bottom: 8px;
+}
+
+.modules-right {
+  margin-top: 8px;
+}
+
+#workspaces button {
+  all: initial;
+  padding: 6px 0;
+  margin: 1.5px 0;
+  min-height: 9px;
+}
+
+#workspaces button.empty {
+  opacity: 0.5;
+}
+
+#cpu,
+#memory,
+#custom-media,
+#battery,
+#pulseaudio,
+#custom-update {
+  min-height: 12px;
+  margin: 7.5px 0;
+}
+
+#tray {
+  margin-top: 16px;
+}
+
+#bluetooth {
+  margin-top: 17px;
+}
+
+#network {
+  margin-top: 13px;
+}
+
+#custom-expand-icon {
+  margin-top: 18px;
+}
+
+tooltip {
+  padding: 2px;
+}
+
+#custom-update {
+  font-size: 10px;
+}
+
+#custom-clock {
+  margin-bottom: 8.75px;
+}
+
+#custom-weather {
+  margin-bottom: 7.5px;
+  margin-top: 7.5px;
+}
+
+#custom-weather.unavailable {
+  min-height: 0;
+  margin: 0;
+  padding: 0;
+}
+
+.hidden {
+  opacity: 0;
+}
+
+#custom-screenrecording-indicator,
+#custom-idle-indicator,
+#custom-notification-silencing-indicator {
+  min-height: 12px;
+  margin-bottom: 5px;
+  margin-top: 0;
+  font-size: 10px;
+  padding-right: 1px;
+}
+
+#custom-screenrecording-indicator.active {
+  color: #a55555;
+}
+
+#custom-idle-indicator.active,
+#custom-notification-silencing-indicator.active {
+  color: #a55555;
+}
+
+#custom-voxtype {
+  min-height: 12px;
+  margin: 0 0 7.5px 0;
+}
+
+#custom-voxtype.recording {
+  color: #a55555;
+}

airootfs/root/.config/wiremix/wiremix.toml

@@ -0,0 +1,5 @@
+# overwrites default wiremix configuration
+# defaults: https://github.com/tsowell/wiremix/blob/main/wiremix.toml
+
+[char_sets.default]
+default_device = "⮞"

airootfs/root/.install.sh

@@ -88,16 +88,14 @@ print_grid_menu() {
     done
 }
 
-ask_confirm() { read -rp "$1 (y/n): " ans; [[ "$ans" =~ ^[yY]$ ]]; }
-
 # Fonction pour échapper les caractères spéciaux JSON (Remplace jq)
 json_escape() {
     local s="$1"
-    s="${s//\\/\\\\}" # Antislash
-    s="${s//\"/\\\"}" # Guillemets
-    s="${s//$'\n'/\\n}" # Retour à la ligne
-    s="${s//$'\r'/\\r}" # Retour chariot
-    s="${s//$'\t'/\\t}" # Tabulation
+    s="${s//\\/\\\\}"
+    s="${s//\"/\\\"}"
+    s="${s//$'\n'/\\n}"
+    s="${s//$'\r'/\\r}"
+    s="${s//$'\t'/\\t}"
     printf '%s' "$s"
 }
 
@@ -131,7 +129,6 @@ install_base_system() {
     pacman -Sy --noconfirm
 
     local disk
-    # On lit le disque directement avec bash au lieu de jq
     disk=$(grep -o '"device": *"[^"]*"' user_configuration.json | head -1 | cut -d'"' -f4)
     cleanup_install_disk "$disk"
 
@@ -157,7 +154,7 @@ run_configurator() {
 
     while true; do
         clear
-        echo "=== SELECT KEYBOARD LAYOUT ===" # TITRE
+        echo "=== SELECT KEYBOARD LAYOUT ==="
         print_grid_menu $(( PAGE - 1 ))
         echo -e "\n[n] Next | [p] Prev | [q] Quit"
         read -rp "Entrée (n/p ou nombre) : " input
@@ -200,7 +197,7 @@ run_configurator() {
 
     while true; do
         clear
-        echo "=== SELECT TIMEZONE ===" # TITRE
+        echo "=== SELECT TIMEZONE ==="
         print_grid_menu $(( PAGE - 1 ))
         echo -e "\n[n] Next | [p] Prev | [q] Quit"
         read -rp "Entrée (n/p ou nombre) : " input
@@ -246,7 +243,7 @@ run_configurator() {
 
     while true; do
         clear
-        echo "=== SELECT INSTALLATION DISK ===" # TITRE
+        echo "=== SELECT INSTALLATION DISK ==="
         print_grid_menu $(( PAGE - 1 ))
         echo -e "\n[n] Next | [p] Prev | [q] Quit"
         read -rp "Entrée (n/p ou nombre) : " input
@@ -263,13 +260,10 @@ run_configurator() {
     done
     disk=$(echo "${DISKS[$((PAGE - 1))]}" | awk '{print $1}')
 
-    # --- 5. ENCRYPTION ---
-    clear; local encrypt_installation="false"
-    ask_confirm "Encrypt disk?" && encrypt_installation="true"
+    # --- 5. ENCRYPTION (FORCE ACTIVÉ) ---
+    local encrypt_installation="true"
 
-    # --- JSON GENERATION (100% BASH PUR, PLUS DE JQ) ---
-    
-    # On échappe les variables et on les entoure de guillemets
+    # --- JSON GENERATION (100% BASH PUR) ---
     local pw_esc="\"$(json_escape "$password")\""
     local hash_esc="\"$(json_escape "$password_hash")\""
     local user_esc="\"$(json_escape "$username")\""
@@ -278,12 +272,7 @@ run_configurator() {
     local kb_esc="\"$(json_escape "$keyboard")\""
     local disk_esc="\"$(json_escape "$disk")\""
 
-    # Fichier identifiants
-    if [[ $encrypt_installation == "true" ]]; then
-        credentials_encryption_line=" \"encryption_password\": $pw_esc,"
-    else
-        credentials_encryption_line=""
-    fi
+    credentials_encryption_line=" \"encryption_password\": $pw_esc,"
 
     cat <<_EOF_ >user_credentials.json
 {
@@ -300,7 +289,6 @@ run_configurator() {
 }
 _EOF_
 
-    # Calculs partitions
     local disk_size; disk_size=$(lsblk -bdno SIZE "$disk" 2>/dev/null) || true
     local mib=$((1024*1024))
     local gib=$((mib*1024))
@@ -309,9 +297,7 @@ _EOF_
     local main_start=$((boot_size + mib))
     local main_size=$((disk_size_in_mib - main_start - mib))
 
-    # Fichier configuration principal
-    if [[ $encrypt_installation == true ]]; then
-        disk_encryption_config=$(cat <<_EOF_
+    disk_encryption_config=$(cat <<_EOF_
 ,
 "disk_encryption": {
 "encryption_type": "luks",
@@ -322,9 +308,6 @@ _EOF_
 }
 _EOF_
 )
-    else
-        disk_encryption_config=""
-    fi
 
     cat <<_EOF_ >user_configuration.json
 {
@@ -442,30 +425,79 @@ if [[ $(tty) == "/dev/tty1" ]]; then
         "ghostty"
         "hyprland"
         "xdg-desktop-portal-hyprland" 
-        "git" # Assure-toi que git est bien là pour cloner yay
+        "git"
+        "yazi"
+        "dolphin"
+        "rofi"
+        "waybar"
+        "wiremix"
+        "impala"
+        "bluetui"
+        "btop"
+        "cava"
+        "fastfetch"
+        "obsidian"
+        "obs-studio"
+        "visual-studio-code-bin"
+        "lazygit"
+        "docker"
+        "docker-buildx"
+        "docker-compose"
+        "lazydocker"
+        "mpv"
+        "prismlauncher"
+        "rust"
+        "localsend"
+        "chromium"
+        "bat"
+        "base-devel"
+        "cmake"
+        "nodejs"
+        "npm"
+        "pnpm"
+        "python"
+        "python-pip"
+        "curl"
+        "wget"
+        "unzip"
     )
     
     arch-chroot /mnt pacman -S --noconfirm "${EXTRA_PACKAGES[@]}"
     
-    # --- 2. CONFIGURATION DE L'AUR (YAY) ---
+    # --- 2. CONFIGURATION TTY AUTO-LOGIN ---
+    echo "Configuring TTY auto-login for $username..."
+    
+    mkdir -p /mnt/etc/systemd/system/getty@tty1.service.d
+    cat > /mnt/etc/systemd/system/getty@tty1.service.d/override.conf << EOF
+[Service]
+ExecStart=
+ExecStart=-/sbin/agetty --autologin $username --noclear %I \$TERM
+EOF
+    
+    # --- 3. LANCEMENT AUTOMATIQUE DE HYPRLAND ---
+    echo "Configuring auto-start Hyprland..."
+    
+    cat > "/mnt/home/$username/.bash_profile" << 'EOF'
+if [ -z "${DISPLAY}" ] && [ "$(tty)" = "/dev/tty1" ]; then
+    exec Hyprland
+fi
+EOF
+    
+    chown 1000:1000 "/mnt/home/$username/.bash_profile"
+    
+    # --- 4. COPIE DES DOTFILES ---
     clear
-    echo "Installing YAY (AUR helper) as user $username..."
-    
-    # On crée le dossier de cache de compilation pour l'utilisateur
-    mkdir -p /mnt/home/$username/.cache
-    chown -R 1000:1000 /mnt/home/$username/.cache
-    
-    # On télécharge et on compile YAY *en tant qu'utilisateur* (très important)
-    arch-chroot /mnt su - "$username" -c 'cd /tmp && git clone https://aur.archlinux.org/yay.git && cd yay && makepkg -si --noconfirm'
-    
-    # --- 3. INSTALLATION DE BRAVE VIA YAY ---
-    clear
-    echo "Installing Brave via AUR..."
-    
-    # On utilise yay en tant qu'utilisateur pour installer brave-bin
-    arch-chroot /mnt su - "$username" -c 'yay -S --noconfirm brave-bin'
-    
-    echo "Custom packages installed successfully!"
+    echo "Copying custom .config files..."
+    # On vérifie si le dossier .config existe bien à côté du script sur l'ISO
+    if [[ -d ".config" ]]; then
+        # On le copie dans le home de l'utilisateur sur le disque dur
+        cp -r .config "/mnt/home/$username/"
+        # On s'assure que l'utilisateur est bien le propriétaire (1000:1000 est le 1er user par défaut)
+        chown -R 1000:1000 "/mnt/home/$username/.config"
+        echo "Dotfiles copied successfully!"
+    else
+        echo "No .config folder found next to the script, skipping."
+    fi
     
     # --- REBOOT AUTOMATIQUE ---
     echo "Installation finished! Rebooting in 3 seconds..."